Do-it-yourself home-made necessary accessories for the garage. Do-it-yourself garage accessories - homemade machines, tools. Do-it-yourself garage tipper: step-by-step video instruction

With proper arrangement of space, a garage can serve not only for parking a car, but as a workshop for its maintenance. In addition, a properly planned space will easily accommodate the tools required for this, provide storage of technical fluids and wheels in the off-season. The functionality of the room will allow you to expand the accessories for the garage with your own hands, which you can make from improvised material or purchase in specialized stores with subsequent refinement to suit your needs.

How to organize the interior space of the garage

Given the fact that the number of things in the garage will increase over time, it is worthwhile to rationally use the walls, floor, basement (if any) by equipping them with the maximum number of shelves, hooks, racks. For skilled people determine workplace, equip it according to needs.

Storage of bulky items

All items that occupy the space of the garage are conditionally divided according to several characteristics: large and small, required constantly or used once or twice a year. Depending on this, before starting the arrangement of the space, they work out a list of large things that are not often used, which include:

• winter, summer wheels;
• bicycles;
• skis.

Garage bike rack option

The list may be longer, perhaps the owner of the garage loves locksmithing, then in his arsenal there will definitely be long pipes (plastic and metal) of various sections, bars and boards. For compact, orderly storage of bulky items, garage home-made or purchased fixtures are used, for example:

1. Purchase wall-mounted bicycle holders that allow you to store them in an upright position, which provides significant space savings;
2. For rubber sets, special shelves are equipped, on which each wheel lies separately. They are placed in any convenient place, for example, under the ceiling, along the wall or, capturing the corner space, or suspended from the ceiling or wall on an appropriate support, previously cleaned of dirt, packed in special cases. This method of storing tires is only suitable for kits on disks. Considering cases when tires without disks are stored, a rack is welded from metal, on which the tires stand vertically in one row. Place the device under the ceiling or on the floor, securely fixing it;
3. With the help of homemade mounts, they provide a compact arrangement of skis, ski poles and other sports equipment.

Attention! A place should be provided in advance in the upper third of the wall for storing a removable trunk.

In addition, craftsmen make various suspended ceiling structures that are parallel to the floor to accommodate long objects, such as pipe cuts or beams.

Devices for small things

For many craftsmen, the number of different-sized screws, nuts, bolts, washers is measured by a bunch of boxes and buckets, in which it is extremely difficult to find the right part. To solve the issue, such gadgets for the garage have been invented that allow you to organize small things and ensure that you quickly find the right part, for example:

• special portable boxes with compartments. A convenient option that allows you not only to store, but also to transfer the required parts if necessary. It should be noted that the cost of the boxes is relatively high, so the ideas below will help reduce costs;
• craftsmen sort small nuts and other parts into jars with twist-on lids, while the lids themselves are securely attached to hanging shelves. It remains only to screw the jar into the lid and the details will always be in sight, at hand.

If financial opportunities are available, they acquire compact storage systems for hardware, nuts and other parts, different in size, differing in mounting capabilities.

Tool storage

The working tool is divided into large-sized and small-sized, respectively. homemade devices for the garage will be different. In most cases, the owners prefer to store a cutting machine, puncher, and other large tools using “native” drawers. Therefore, for their convenient location along the wall, a rack is made from improvised materials, taking into account the total load on the shelves (for home-made structures, the weight should not exceed 150 kg).

Attention! The stores offer a wide variety of models of shelving, made of both wood and metal, withstanding loads of up to 500 kg or more. At a relatively low cost, it is convenient to purchase a ready-made shelving in the garage for the desired size, fixing it against the wall.

For small tools such as wrenches, screwdrivers, pliers and others, organize the space depending on their number:

• sets are stored in purchased boxes, placed on a rack;
• for single items, they either equip cabinets in which each tool is fixed in the corresponding niche, or prepare a perforated surface (as in a store) mounted on the wall and determine a specific place for each of the tools.

Some craftsmen place their tools using plastic pipe structures, in which holes of the appropriate diameter are made.

Homemade machines for garage work

For a comfortable experience repair work provide a place for a workbench (to save space, it can be made folding). To begin with, they work out a table drawing, thinking over the presence of retractable shelves, then they make it from boards or metal sheets, equip it with a vice and a grinding machine.

In some cases, craftsmen cannot do without home-made machines and other devices made independently and improving the quality of the manufactured item.

Press from improvised tools

Homemade garage press

One of the most popular do-it-yourself gadgets in the garage is the press. To create it, you will need a hydraulic jack, metal surface, which will serve as the base of the movable part of the press, springs and shaped pipes or a channel to create a frame. Further:

• create a frame by welding channels and reinforcing the structure with transverse stiffeners, transverse corners are also welded downwards for stability;
• the movable platform is attached to the upper frame with springs, a jack is installed.

The efforts of the press are regulated by a jack.

Homemade screwdriver holder

Depending on the needs of the garage owner, other useful homemade machines, for example, drilling, made on the basis of a drill, fixed with clamps and moving along the rail with the help of a gear, or cutting, or turning.

In addition to the above devices, you should take care of the location of work clothes, provide for the presence of a fire extinguisher or sand (based on fire safety rules), consider ventilation and lighting systems.

Thus, having shown a little ingenuity and thriftiness, you can make do-it-yourself garage fixtures, thereby ensuring compact storage of things and freeing up enough space for minor car repairs and work related to servicing one or another home appliance.

vseogarage.ru

DIY garage accessories

For a true car enthusiast, a garage is a second home. And then the first. Therefore, everyone tries to take its arrangement and equipment seriously. The functionality of each square centimeter of area is also very important. This will allow you to work in a spacious room, and tools and spare parts will be stacked and arranged correctly and in perfect order. As for the arrangement in the domestic plan, we will not talk today, but today we will try to save on equipment.

What should be in the garage

In principle, there is no such device that could not be bought. True, not everyone has the opportunity to spend tidy sums on the purchase of Bosch equipment, by the way, it is useful to look through catalogs with Bosch equipment or Intertool, or Interskol. The young but frisky company Johnsway and Ombra, repainted from green to brown, have great experience and opportunities in this regard.

The catalogs contain a sea of ​​excellent working equipment, fixtures and universal pullers, mandrels for all occasions and, of course, tools that are difficult to look at without a stingy male tear. But the cost in the catalogs is unreasonably high, as for a private trader. Service stations, of course, are in more favorable conditions, they earn money with equipment and God himself ordered them to have a better tool. Otherwise, such a master is worthless.

Garage Craftsman Wish List

Still, it is worth making a rough list of what should be in the workshop, and from it already choose accessories for the garage that you can build yourself. Here's what everyone would like to see:

This should be an approximate set of additional equipment, not counting welding, a compressor, two or three angle grinders and two or three drills and screwdrivers of different capacities.

Homemade fixtures

An elementary frame for a grinder can become a universal home-made machine. Applications - mass, made from anything, up to durable wooden frame. it will be useful in cases where it is necessary to process a small part carefully and with two hands, without clamping the part in a vise. Of course, this design has limitations, but as a small grinder or cut-off machine, it will work for five.

We do not indicate the dimensions, the designs and sizes of the grinders are different. The photos show the essence of the device, and it is not difficult to assemble it. It is worth working on fixing the grinder to the frame - so that it is quickly and securely fixed and quickly removed. Such a device is especially valuable for angle grinders with adjustable speed.

As a base, we use a chipboard sheet of suitable size, which is hinged, as in this design, or on latches, you can use a screw mount.

DIY lathe

Drawing of a small lathe, which is presented, can be useful to those who occasionally have to deal with turning work, and it makes no sense to buy a desktop one. This project, of course, will not satisfy those who need high accuracy and high spindle speeds, but for minimal turning work, it will do. Instead of the spindle from the M10 bolt shown in the drawing, use a finished spindle or drill chuck.

Designed for processing wood and plastic parts, part diameter - up to 50 mm, and length up to 200, but can be revised if necessary. If we take it as a basis, then replacing wooden base on any rolled metal, we get a semblance of a desktop machine for metal turning.

Tool Storage

Various trifles are often folded in plastic buckets and boxes in the form of a kind of assortment. Therefore, finding the right small tool, drill or nut is quite problematic. For storing small things, jars of mustard, mayonnaise and other products with a metal or plastic lid that is firmly attached to the jar are perfect.

To organize easy access, you will have to sort through everything, separate the cutlets from the flies, the bolts by 10 from the nuts by 6 and sort everything into jars. Covers are screwed to shelves or any horizontal surface, and now it will not be difficult to find the necessary fasteners.

For horizontal storage of loose fasteners, magnetic containers can be used. Convenient thing. Fasteners will not crumble, always in sight, and containers can be arranged as space requires. The main thing is to fix a thin magnetic tape in the right place, and glue large metal washers to the bottom of the containers themselves.

More creative ideas, which come to the mind of resourceful craftsmen regarding the organization and storage of tools and fixtures, we showed in the photo. Use your imagination and reinvent the wheel. And your garage will be the perfect place for a comfortable repair of your favorite car.

See also electrical heat guns for garage, lifting Garage Doors do it yourself - drawings

ladamaster.com

How to make homemade garage fixtures: 2 workshops

Home-made devices can be made from improvised materials Car repair is a complex and responsible task that requires practical knowledge and the availability of special equipment. This equipment includes whole list tools that are expensive. That is why even those motorists who know how to fix their four-wheeled friend give it to a car service for repairs. If you decide to get your own accessories for the garage, but do not want to spend a lot of money on such purchases, you can do some of the list of necessary things with your own hands.

So that your garage can become a place for car repairs. It needs to be equipped with a large number of different tools. Some of them will have to be purchased in specialized stores, but others can be made with your own hands.

Having all the necessary fixtures and machines for the garage, you can open your own small car service. Such a garage business will bring you good income.

Garage accessories are easy to do with your own hands. In fact, there are many master classes for the manufacture of such homemade products. Let's see which tools are made on their own most often.

What homemade tool is suitable for a garage car service:

1. First of all, it is a car lift. Not a single car repair shop can do without this equipment. The price of such a finished device is high, but if you wish, you can make it yourself. Today we will talk about the technique of creating such accessories.
2. A hydraulic press is also needed for the garage auto repair shop. Such a device helps to compress unnecessary parts. You will be pleased to know that you can make it yourself with minimum investment.
3. Useful accessories such as a spotter comb are also important. Such equipment is easy to manufacture, and in ready-made is very expensive.

For a car service with your own hands, you can make metal shelves that can be moved

These are not all the fixtures that you can make for your garage with your own hands. However, the described useful homemade, we will make today in our master classes.

Garage Accessories: Room Improvement

Before we start describing how to make garage accessories, we suggest putting things in order in the auto repair shop itself. After all, each tool should have its own place, so it will be easier for you to work.

Homemade tools are very practical, but do not always look aesthetically pleasing, so it is better to remove them from prying eyes. But, for example, such a device as a drilling machine and jacks can be put in a prominent place.

You can't make a drilling machine with your own hands. In this case, the main thing is to choose the right tool correctly.

Now more about the organization of the workspace. If you decide to make a car repair shop in the garage, and make money from it, then you will have to prepare the space accordingly.

How to organize tool storage space in the garage:

1. First of all, we advise you to make some wooden boxes. In some of them, you can make a shelf with holes for screwdrivers.
2. It is also necessary to make mobile racks for heavy tools. This will allow you to change the location of these shelves, putting them in a convenient place for you.
3. So that in the process of work, you do not have to constantly run after the tool, you can use a special belt that will fit the essentials. Such devices can be bought or made independently.

These homemade tool storage spaces will help you organize your garage space. Thanks to this, everything you need will always be at hand. This will save you a lot of time.

Do-it-yourself garage fixtures: making a lift

A lift is needed for every auto repair shop. This device helps to keep the machine in an elevated position for the time you need. Due to this, access to all hard-to-reach areas is opened.

Of course, you can buy a lift in specialized stores. However, the price of such products will unpleasantly surprise you.

The lift for the car repair shop can be made by hand. You don't even need to be a welder to do this. Therefore, you can easily cope with such work.

In order to assemble the lift, you will need:

• Worm gearbox, the load capacity of which will start from 300 kg;
• Steel corners with dimensions of 7.5X7.5X0.8 cm - 2-3 pieces;
• Some number of bolts;
• You will also need a steel plate, at least 1 cm thick;
• Two iron chains, at least 2 cm thick;
• Steel cable with half a centimeter section;
• Metal hook;
• Two dowels in the form of an asterisk.

From such materials it is easy to make a lift without spending a lot of effort. The main thing is to perform all actions accurately and efficiently.

To make a good garage lift, you need to use high-quality metal

How to make a car lift:

1. Steel corners need to be attached to opposite walls. In this case, they should be located on the same level.
2. A plate is attached to the corners. This is done with eight bolts. Thanks to this connection method, the plate can be moved relative to the engine.
3. A worm gear can be installed on the plate.
4. One of the keys, the one with a larger diameter, must be fixed on the gearbox drive shaft.
5. One hole must be made on the plate. A chain is passed through it and closes into a ring.
6. On the output shaft of the gearbox, you need to install a smaller key.
7. A couple of holes need to be drilled in the lift plate.
8. Through drilled holes you need to skip the second chain. One of its ends is thrown over a smaller key, and a hook is hung on the other.

This completes the manufacture of the lift. You just need to test it in action. Spending a little time on such work, you can save an impressive amount.

How to use a garage tool such as a lift

Using this lift is quite simple. However, in order not to damage anything, you must follow a few rules.

How to use a homemade lift:

1. Unscrew the bolts that connect the machine's engine to its frame;
2. Loops of a steel cable carefully lead under the engine. Throw the ends of the rope onto the hook.
3. Move the chain carefully. Gradually, the cables will stretch, which will set the engine in motion. Perform all actions slowly and smoothly.
4. When the engine is raised to the required height, the lift can be stopped. The gearbox will hold the structure.
5. In the place where the car flocked, it is necessary to put a table that can withstand the weight of the engine.

Please read the instructions before using the lift.

Using a lift will greatly facilitate your work in the workshop. Therefore, it is worth spending time and making it yourself.

Garage machines: we make a hydraulic press

The hydraulic press is often used in auto repair shops. It is necessary for installation and repair work. Such a device works on the principle of a jack.

Such a device can be very expensive. Some models can cost several tens or even hundreds of thousands. It is because of the cost of a factory product that a hydraulic press is often made by hand.

There are several positive aspects of making a hydraulic press with your own hands. Let's get to know them in more detail.

Why making a DIY hydraulic press is a good idea:

1. A homemade hydraulic press can be made specifically for the work you need. This applies to both its size and its performance.
2. You can assemble such a jack from improvised materials. Therefore, the price of such an assembly will be low.
3. You can be sure of the quality of the assembled product. If necessary, it can be repaired.

The hydraulic press is made of a jack, channels, two metal corners, bolts and springs.

From time to time the hydraulic press should be inspected for worn or damaged parts.

The assembly of the structure is carried out according to the scheme. All elements are fixed by welding and bolts. It is very important to position the jack in the correct position.

Homemade garage fixtures: making a comb

We want to tell you about the manufacture of the comb. This spotter tool can be used to smooth out dents in doors. It can be purchased in specialized stores, or do it yourself.

How to make a comb for a spotter with your own hands:

1. Take a metal strip and make three holes in it. The first should be at a distance of 1.5 cm from the edge, the second at a distance of 2.5 cm, and the third - 3.
2. Now between the two holes (which are closer to the edge), you need to saw through the jumper with a file. After the completion of this work, instead of two round holes it should be one oval.
3. From the third hole we make a cut to the edge. You should get a notch for the washer.
4. Now we cut out a kind of semicircle above the hole made. As a result, you should get a hook with an oval hole and a rounded notch. Make four more such details.
5. Take a tube with a diameter of 1.5 cm. At a distance of 2 cm, drill a hole with a diameter of 8 mm. After two cm, cut off the tube.
6. On the other tube, make a semicircular recess, our workpiece should ideally fit into it.
7. We weld the tube with a notch to the workpiece so that the hole is on top. A nut must be welded to this hole.
8. We take another tube, weld a washer on one side, and put our hooks and workpiece on the other. The comb is ready.

Such a comb is no worse than a purchased one. It does its job well and is inexpensive.

Do-it-yourself garage accessories (video)

Garage accessories are not difficult to make with your own hands. To do this, you need to apply only diligence and ingenuity. Dare!

Examples of do-it-yourself garage fixtures (photo)

Attention, only TODAY!

oteplicah.ru

Homemade machines and accessories for the garage. Read the article!

By making home-made machines and accessories for the garage with your own hands, you significantly save your own and family budget. Homemade shelving, various furniture, workbenches and even some tools - all this can be done independently.

Self-made garage machines are needed to solve the following tasks:

• Simplifies the process of processing metal products,
• There are new opportunities for grinding and processing wood,
• A machine in the garage allows you to save on the purchase of an electric saw and other woodworking tools.

As a rule, any of the racks or power tools is quite expensive in the construction market. That is why the owners of garage boxes come to the idea of ​​​​creating some fixtures on their own. The most popular options for homemade homemade tools are:

• Manual or semi-automatic joiner's workbench for metal;
• Wooden or metal workbench;
• Drilling machine for garage;
• Homemade press design;
• Various variations of shelves, racks and organizers for tools;
• Hoist or winch for lifting heavy parts and things.

How to make drilling machines in the garage with your own hands?

Drilling machine for garage

Thanks to this homemade device, you can perfectly cope with the manufacture of any number and diameter of holes for metal and wooden objects right in the garage workshop. The simplest and at the same time reliable option for manufacturing a machine is to use a drill with a bed. To make the device you will need:

• Metal frame in the form of a base;
• A small mechanism for imparting rotation to the drill;
• Low vertical stand for attaching a drill.

In the form of a rack, it is best to use trimmings from chipboard or unedged boards. Due to the low weight of the drill, there is no need to use a metal profile. At the same time, it is better to use a cast-iron base for the bed - it will allow you to avoid any vibrations during the operation of the equipment. In the video you can see how to make homemade machines for the garage with your own hands.

How to make a carpentry vise in the garage?

To create a vice with your own hands, you will need to connect the following elements in the correct sequence:

• Several supports, each of which will be a sponge for clamping the product,
• One metal clamping jaw,
• A set of steel guides that are used for smooth movement of the sponge,
• Lead screw design
• An element called a crank that sets the screw in motion.

The first support from the pipe will act as a kind of body. It will be necessary to solder other supports to it from below and install a steel flange. Especially for the movement of the running nut, we drill a hole and, on the contrary, weld the sponge. For the operation of the equipment, it remains only to install a stud in the holes, fix it with nuts and insert a movable tube next to it. As a result, making a vise for a garage with your own hands is not particularly difficult.

Forge in the garage with your own hands

If you decide to make a forge in the garage, then you don’t need to buy expensive components for this - everything can be made from improvised materials. The main for the forge will be the old gas stove. We install it in the chosen place, having previously overlaid the base and the construction box with refractory bricks (chamotte) and smeared all the cracks with clay.

The next step is to make a grate. For a mini forge in the garage with your own hands, you can weld it from an old piece of steel. It is advisable to choose a metal of at least 10-15 mm. Further, furs are made for pressurization, the block of which can be quickly put together from thin-walled plywood and several pieces of board.

The last step is to prepare the fuel. Coal can be bought at the store or made by yourself in a trench using a large duralumin pan. To do this, load the chopped firewood, close it tightly with a lid and smear the cracks with the edges with a clay mixture. In the trench, you make a firebox and heat the coal “until ready”. As a result, you get a full-fledged forge in the garage, made by yourself.

Now, from improvised materials and tools, you can easily make things useful for the garage space on your own. If you have any questions - write them in the comments!

A garage is not only a place for a car, but also a source of invaluable additional space that can be used truly rationally if you construct useful devices with your own hands.

DIY garage accessories

Since the garage is intended to be a home for cars, care should be taken to ensure that the place for tools is well organized. Also, there will probably be several square meters in the room in order to take out some of the items from the apartment, so as not to clutter up the living space.

When installing various devices in a room, it is important to consider that all available equipment is at hand. To do this, you can use the following recommendations:

The rational organization of space in the garage creates many tangible benefits:

• it becomes possible to independently carry out small-term repairs of auto parts and other mechanisms, due to which you can significantly save money;
• convenient placement of tools significantly speeds up the progress of work and saves time;
• the creation of additional places for storing tools, old things, clothes makes it possible to unload the apartment from things that are rarely used in the household;
• finally, the well-thought-out internal logistics of the premises allows it to maintain its attractive appearance and avoid clutter.

NOTE. At the stage of project development, it is important to proceed from the area of ​​\u200b\u200bthe room, as well as take into account several mandatory utility compartments - for storing summer and winter tires, canisters, a jack, etc.

Video TOP of the best ideas for arranging a garage with your own hands

Garage rack: step by step instructions for making

Since the garage always contains quite a lot of items, ordering their location is a fundamental requirement for proper storage. The simplest and at the same time convenient option is to create a rack with shelves.

Preparatory stage

Before proceeding with the installation of the structure, several important requirements should be considered:

• The total weight of the rack should not be more than 4-5 centners - otherwise the structure will be very difficult to move if necessary. It will also significantly press on the floor, which can degrade the quality of the coating.
• When choosing materials, it is important to proceed from considerations of strength and durability of the structure. Metal is optimal, as well as wooden products made of beech or oak. Plastic shelves are not suitable - they are not durable and, moreover, may not withstand temperature changes.
• Choosing between a metal and a wooden structure, you should proceed from your specific needs. Metal is more durable and stronger, but wood is more affordable. If you need to place a few tools, it is enough to make a small wooden rack.
• Since all tools are very heavy, you should immediately calculate the strength of the structure so that it can withstand at least 100-150 kg on one shelf.

Installation of a wooden structure

To make such a device for a garage with your own hands, you will need the usual working tools:

• hacksaw for wood and metal;
• hammer, nails;
• screwdriver, self-tapping screws;
• roulette construction;
• construction level;
• electric drill.

All wooden details before assembly, it is important to prime and varnish. In the garage you can see high humidity or temperature difference - therefore, without processing, the tree will not last long.

Video - Do-it-yourself wooden rack manufacturing technology

Installation of a metal structure

Metal structures are exceptionally durable and strong. In addition, they do not need to be treated with special materials to prevent decay.

From metal, you can make both a rack and individual structures, for example, to store rubber.

In this case, the rules for storing tires, which are schematically shown in the figure, should be taken into account.

At the design stage of a metal shelving, it should be taken into account that all the necessary items can be freely accommodated in it. You can take this drawing as a basis.

Or this option.

The easiest option is to purchase a modular design and assemble it yourself. But you can make this device for the garage with your own hands. The sequence of actions is as follows:

The heaviest equipment is best placed on the lower shelves for optimal load distribution throughout the rack. At the same time, the most the best way- when the lower floors are made of corrugated metal, and for the upper floors it is quite acceptable to use durable chipboard.

Hanging shelves: fast and practical

Not in all cases there is a need to create a rack, since it will take up a lot of space. On the other hand, in a garage of any size, there is always an unused upper space that can be easily occupied by hanging shelves.

Structurally, it is quite realistic to do with your own hands any version of such a device for a garage:

Of the tools you will need a standard set, described above. The sequence of actions is as follows:

If the shelf is mounted to the ceiling, you can strengthen its connection to the wall using metal corners - then the product will not sway and will last much longer.

Schematically, the whole technology is shown in the figure.

Making a shield shelf

The do-it-yourself manufacturing technology of such a device for a garage has its own differences compared to the installation of conventional shelves:

• The shield itself is made of durable plywood, the parameters of which are selected according to the situation. Visually, the shield should completely cover the surface of the desktop.
• A place is allocated on the shield for all the shelves and appropriate notes are made.
• Further, all holes are made in the surface of the structure, into which dowels enter. It is on them that the hooks will be attached, on which all the tools will be placed.
• The shield is fixed to the wall using brackets. Corresponding holes are made using a perforator.

Schematically, all steps are shown in the figure.

Do-it-yourself toolbar above workbench in garage

Garage workbench: step by step instructions

Another design that will probably be needed for repair, plumbing and other types of work is a workbench. It can be purchased at the store, but if you have a certain skill, then it is quite possible to make such a device with your own hands and put it in the garage.

Before the actual installation work It is important to clarify a few important details:

• Where will the table be located?
• What kind of work will be mainly carried out on it.
• Which work surface material is suitable - metal or wood.

All these questions are closely related to the purpose of the product. If the work is supposed to be done often, then it is better to choose a durable metal. And for standard household tasks, a durable tree will do.

It is important to understand that a workbench is not just a work surface. Often it combines the function of a cabinet, a small chest of drawers and even a metal safe - a similar set of parameters depends on the specific configuration of the product.

Varieties of workbenches

The key classification of workbenches is based on the types of work that are supposed to be carried out on it:

At the same time, these functions can be combined, so such a classification is largely conditional. The best option such garage fixture- This is a construction on a metal frame with a wooden table surface and drawers. It is more reliable than a wooden counterpart, and allows you to save on manufacturing due to the fact that some parts will be made of wood. The surface of the table can be reinforced with a metal sheet - then the workbench will last a very long time.

Manufacturing technology of a workbench from a metal frame

For installation of the structure, you will need a standard set of tools and materials:

• welding machine;
• grinder for metal;
• building level;
• jigsaw for wood;
• screwdriver, drill;
• self-tapping screws, anchor bolts;
• hammer and nails;
• metal corners with parameters 5 * 5 cm;
• pipes are square 6 * 4 cm, total length is about 24-25 m;
• steel strip 4 cm thick, up to 8-9 m long;
• paint for wood and metal processing.

These settings are for making finished product with table parameters 220*75cm as shown in the picture.

The sequence of actions is as follows:

Even at the stage of designing a workbench, it is important to decide whether the device will be collapsible or whether it will be stationary in the garage. In the case of a collapsible version, all parts are fastened with self-tapping screws, and the principles of technology will be different.

Manufacturing technology of a wooden workbench

A wooden workbench is less durable than a metal workbench. It is well suited for those cases where the work is supposed to be done not so often - several times a year.

To make this do-it-yourself garage fixture, you can use the same drawing that was given above, or take the diagram shown in the figure as a sample.

The algorithm will be something like this:

Do-it-yourself garage tipper: step-by-step video instruction

Along with the creation of the considered devices for the garage, you can also take care of making your own working tools that will be needed directly for car maintenance.

One of the most useful installations is a tipper for inspecting the bottom of the machine. The need for such a product is most relevant for Russian realities, since not in every case there is a real possibility of building viewing hole.

Detailed video instruction with step by step diagram manufacturing

Before making such an installation, it is extremely important to consider the issue of safety. Even a light car, if dropped, can cause an accident and at least get severely injured. Therefore, it is possible to undertake the creation of such a structure only if there is sufficient skill.

Self-manufacturing of garage fixtures allows you to rationally organize the interior space and, in fact, get your own workshop in which you can perform any ongoing repair work.

Original ideas for organizing space in the garage

And finally - a photo selection of visual ideas for creating capacious structures from a variety of items that are sure to be found in any garage.

A garage is more than just a place to park a car. It is also a workshop, and a place of rest, and an interest club. Therefore, the arrangement of the garage should be convenient and thoughtful. In a small area, you need to place a lot of things, and it should be convenient to use them. This will help homemade for the garage. What people do not do with their own hands. From an elementary shelf to a complex device. All this can be made independently. But you need to know how. A few ideas for modernizing the garage and a plan for their implementation in the article.

Homemade for the garage: ideas for arrangement

Arranging a garage is a long process. You can’t do everything right away, you have to constantly modernize something, change, make something new. At the same time, they mainly use homemade products for the garage. It requires less money, and it’s even more fun - making the right thing out of the garbage is worth a lot.

Even in a small area you can fit everything

Tire and wheel storage

Each car owner is faced with the problem of storing off-season "shoes" for the car. Where to stick the tires is a sore point. In general, how tires are stored depends on whether they are mounted on rims or not.

Tire storage methods

So tires with disks can be hung or stored lying down - in the form of a stack, stacking them one on top of the other. For hanging tires, you can use luggage straps, chains, a metal cable with a diameter of 4 mm or more in a polyethylene sheath. Fasten the belts to the ceiling, wall, to the beam located on top.

Polyethylene sheathed cable, ring anchors and tightening clamps

Luggage straps are best attached to rings in the ceiling or hooks on the walls.

Drive pins of sufficient length into the wall, but such that the pin does not stick out of the tire

Not only a pin is suitable, but also a hook with a small bend radius

Another affordable way is to drive pins or hooks with a small bending radius into the wall. The distance between the hooks is slightly more than the diameter of the tires. The length of the pins must be such that they do not stick out of the tire. You can fill them almost under the ceiling so that the wheels fit.

Tires without rims can only be stored standing up. They make special shelves for them. They are usually welded from a profiled pipe. 20*20mm, maximum 30*30mm. You can also use a corner. round pipe it is inconvenient to cook, but crossbars can be made from it - the tires fit and hold better in this case.

Shelf width - 4 times the width of the tire, plus a margin of 10-15 cm for some freedom. The height of the rear wall is slightly higher than the outer diameter of the wheel. The design is simple = the side resembles a right triangle. Having an inverter welding machine, it will not be difficult to weld such a shelf.

Tire storage shelf - a great DIY for the garage

This is a factory version with a completely inhumane price tag. But you can borrow the idea - the crossbars can be rearranged depending on the size of the tires ... you never know

Just welded and painted

Such shelves are usually hung on the wall. But the place must be chosen so that the light does not fall on the rubber - it deteriorates from this. Not the most difficult DIY for the garage, but very useful.

Workplace

Probably the largest number of garage homemade products is associated with workplace equipment and tool storage systems. Moreover, shelves and racks in the garage are not the only way to solve this problem. First of all, you need to decide where the workplace will be located. There are three options:

A table or a workbench for a garage is made of boards, sheathed with plywood. Inexpensive, very reliable. If you have a welding machine and reconciliation skills, you can weld a frame from a corner or a profiled pipe. Sewing again is better moisture resistant plywood. This results in a smooth, abrasion-resistant surface. You can, of course, use laminated chipboard, but the laminating layer is quickly damaged.

U-shaped workbench for the garage

To prevent the place from “walking”, you can install shelves under the tabletop or make drawers. Boxes are more convenient, but making them is still a hassle. It is quite possible to make shelves and put boxes knocked out of plywood on them. Plastic boxes and baskets are also suitable. But the walls must be thick.

Drawers can be placed on shelves

By the way, there is a useful idea - to make a rack for storing tools from used canisters. Look for the ones with the handle on top. Further, everything is simple - one of the sidewalls is cut out and in the future this canister is used as a box.

Useful and simple DIY for the garage

It is not necessary to make a whole rack - it is still difficult to remember where, what is. But by the same principle, you can make boxes for shelves. By the way, you can stick inscriptions or pictures on the ends (identification is faster with pictures). Such homemade garage crafts bring satisfaction - creating a useful thing from garbage is a pleasant feeling.

Tool storage

The most difficult task is to organize the storage of tools in the garage. It is necessary to make sure that everything is in order, but, at the same time, is at hand and in plain sight. Moreover, closed boxes are suitable only for very organized people who always put the thing they have taken in its place. Otherwise, you will constantly rummage through the boxes, forgetting where everything is. There are several ideas for convenient storage of small items and tools. These are very simple homemade products for the garage.

The usual way to solve the problem quickly metal grid. A reinforcing mesh of 2 mm wire, a cage of 10 cm is suitable. Attach it to the wall, bite off some twigs, bend them, make hooks, crossbars, etc. out of them. You can buy special hooks that are attached to the net (available in stores selling trade software), ordinary double-sided hooks, which can be bought or made from wire, are also suitable.

Grid on the wall - a way to quickly organize tool storage

Screwdrivers are conveniently stored on a special shelf. Take a board, plywood, 10-15 mm thick. The board must be well sanded - so that there are no splinters. Then, in a plane, drill holes of different diameters in one or two rows. If the board is wide enough, you can make larger holes - for chisels or even for hammer handles. Clean all the chips again. Now we need to come up with a wall mount. You can use a regular bracket. Screwdrivers, chisels, and other similar material are inserted into the holes. Convenient, fast, everything.

Idea for storing screwdrivers in the garage

There are also useful homemade products for the garage that allow you to organize storage. hand tool. Pliers, pliers, wire cutters, etc. placement is problematic. Can be hung on a net. It is convenient to shoot, but not to hang. But there is a simple solution - attach a narrow board and put a tool on it. To make it fit comfortably, grind off the board on one side. When cut, it should look like an isosceles triangle.

Storage of hand tools in the garage

More simple idea for storing cordless tools, chargers and spare batteries for them. Make a shelf as in the photo above. Cuts of various formats are made in the lower part, and the upper ones are used as ordinary shelves. The idea is that everything is in one place, quickly gets / installed in place. These homemade garage crafts will make your workplace comfortable. Keeping order will be easy.

Homemade carriers for the garage

Even with very good lighting in the garage itself or during the day on the street, visibility under the bottom of the car is very low. To illuminate the front of work, portable lamps are used - carrying. These are the simplest homemade for the garage. With them, you can start the epic of arranging and equipping the garage space.

The most widespread type of carriers for the garage. Homemade usually make very similar

In the simplest version, this is a cartridge attached to a wire; a small screen with a hook can be attached to it. This is such an uncomplicated thing. Light bulbs are used ordinary - incandescent or housekeeper under a standard cartridge. Everything is not bad, except that these bulbs beat very often, you need to look for how to hang them so that they shine in a specific place. In general, the design needs to be improved. There are several modification options.

Unbreakable lamp socket

This plastic bottle shade perfectly protects the fragile bulb of an energy-saving lamp. You can also use an LED lamp, but the incandescence will not work - it heats up too much. The design is ordinary - a cord with a plug and a cartridge at the end.

The main task is to find a plastic vessel with walls made of translucent milky plastic of medium thickness. Transparent will not work - it will not scatter light, too thin walls will not save the lamp from impacts. After you have found a suitable vessel, a trifle remains:

Everything is simple, but such a ceiling allows you to brightly illuminate exactly the right area, the rest of the space is flooded with even light that does not hurt your eyes.

Carrying out LED recessed downlight

The simplest and most common garage homemade products are portable lamps. Without them, it is inconvenient to work not only in a garage pit, but even just on a workbench. You need a flat recessed LED lamp that can be switched on at 220 V. These models are called "pills" because of their shape. Still need a cord with a plug, a piece plastic window sill- to build a lamp. A piece of window sill should be larger than the lamp. Choose your own dimensions. Further actions are:

Everything, homemade carrying is ready. This option is for floor installation. The movable leg allows you to change the angle of inclination. To make it turn over less, a couple of weights can be fixed inside the case (in its lower part).

Attach the carry cord to the ceiling

Conveniences are made up of little things, and very simple homemade products for the garage help in this. For example, you can remove the cable from a portable lamp that is always tangled under your feet. Carrying is usually done with a cheap cable. It is not the most flexible, does not fold well, its coils on the floor fall under your feet. In general, it is inconvenient to use. You can protect yourself and carrying - hang the cable from the ceiling. The solution is simple but very effective.

Here's a "suspension" to the ceiling for carrying, you can do it yourself in an hour

• Two anchors with a ring at the end.
• Cable tie.
• Clamp clamp.
• Metal cable. The length depends on the size of the garage - it is necessary from one wall to another.
• Steel/plastic rings or steel wire and a piece of pipe to make these rings.
• Carry with a long cable - its length is about twice the length of the garage.

The cable is pulled along the long side of the garage. It is more convenient - not far from the "working" wall, where a workbench or other equipment is located. Little work:

Well, that's all. You can use. With such a device, the carrier can be pulled to any end of the garage, while the cable does not get confused and does not cling. Convenient, takes little time.

Do-it-yourself garage compressor

A compressor is needed in any garage. And by the way, this is not the most difficult homemade for the garage. A low-power compressor for a garage for inflating tires and other small jobs can be done with your own hands from auxiliary materials. For example, from the compressor from the refrigerator. For this you will need:

• refrigerator compressor;
• a sealed container with thick walls (you can use a flask from a fire extinguisher, a small gas cylinder);
• safety valve at 8 atm;
• manometer;
• fitting;
• oxygen hoses with couplings (choose the length based on the size of your spare parts);
• base for the compressor - a thick board, a piece of plywood will do.

In order not to pump any muck into the tires, it is also advisable to put a filter - to separate oils, dust and other contaminants. Scheme homemade compressor presented in the photo.

Scheme of a homemade compressor

The compressor must be equipped with a starting device. We plug it into the network, look into which tube air is sucked in, mark it. You can put a car filter on it - clean air will be pumped.

We assemble an oil separator receiver from a cylinder and a safety valve. To do this, we cut two fittings into the cylinder - for air inlet and outlet. At the inlet we put a safety valve to it with the help of an oxygen hose we connect the compressor outlet.

Homemade compressor for a garage based on a compressor from a refrigerator

We put another car oil filter on the outlet of the oil separator receiver - to remove the oil completely. We connect the filter to the pressure gauge, and from it goes already a hose that is connected to the busbar through an appropriate adapter.

Assembly completed. But in order to carry this device comfortably, everything needs to be fixed in some way. You can weld the frame to size, attach wheels and a handle for easy transportation. One of the compressor options for pumping wheels is described in the video. There is no receiver, but the oil filter performs its functions. You can do it this way, but with a receiver, the design is more reliable.

Since the compressor in the refrigerator is small, it can take a long time to inflate the wheels. It can be made more powerful by installing two compressors that will run simultaneously. Accordingly, the pressure will build up twice as fast. But in such an installation, a more solid security group is required. Such homemade products require a little more equipment, since the circuit is still more complicated.

The article discusses the most convenient and practical do-it-yourself garage accessories that can improve the comfort of using this room. Here are detailed recommendations for the development and creation of structures designed for convenient storage of tools and automotive parts, tips for making furniture, as well as arranging a lighting and heating system.

Useful do-it-yourself garage accessories: general recommendations

The garage is designed not only for storage, but also for servicing the car. For this reason, this room should be spacious, clean, comfortable and well-equipped.

To achieve all this, it is enough to take into account the basic requirements for the organization of space:

The presence of shelves for tires and storage of tools significantly saves free space and allows you to optimize space.

The lighting quality is great importance, since not only productivity, but also the quality of minor repairs depends on this.

The construction of a garage workbench, machine tools, a viewing hole and other devices expand the range of opportunities for a car owner in relation to vehicle repair and service.

Optimal organization of the garage storage system: 1 - open brackets and hooks for frequently used tools, 2 - a rack for small tools, 3 - shelves for spare parts and tires, 4 - a rack for large tools, 5 - cabinets for various things, 6 - a workbench with extra shelves

About 80% of the shelves in the garage are built with their own hands to store garage accessories, namely:

• tools and accessories;
• component parts for the car;
• accessories.

Often in the photo of the shelves in the garage with their own hands, they are combined with a rack, which can also be made independently. Most often, the rack is considered as the main place for storing tools. After its installation, the remaining space is filled with comfortable and roomy shelves.

Be sure to allocate a place where work clothes will be stored. It is not necessary to occupy a large area, you can get by with one shelf or even a hook (depending on your needs).

A garage is a place where hazardous and flammable substances are stored. These include oil, gasoline, solvents, paints, polishes. For them, it is necessary to provide a separate cabinet, hang a fire extinguisher and install a sand tank.

To protect against contamination during storage of wheels mounted on tire brackets, it is worth purchasing large bags or specialized covers to prevent dust from entering.

Brackets and shelves for wheels in the garage: design features

The most bulky vehicle spare parts include sets of tires, which can be winter or summer. When winter tires are used, summer tires are usually stored in the garage and vice versa. Therefore, you should organize shelves for storing tires or brackets.

The bracket design looks like this:

Two triangular frames made on the basis of the corners. Jumpers made of any durable metal are installed between these frames.

The triangular parts of the structure are fixed on the wall in a pre-selected location. Wheels should be installed perpendicular to the supporting element of the stand. In this case, the tires should fall slightly between the jumpers, thus fixing on the shelf due to their own weight.

For compact storage of wheels, a whole rack in the form of four wide shelves can be used. It is suitable for placing wheels with discs that can be placed one above the other in a horizontal position. The design can be made angular and raised to the wall.

• wooden beam;
• boards;
• chipboard sheets.

Installing busbar brackets is the most rational way wheel storage. More savings free space can be achieved by hanging the rubber to the ceiling base along garage wall. This option is possible if the room has a large height and reinforced concrete floors in the form of slabs on the ceiling. They will be used as the basis for screwing in the dowels.

Tool storage: interesting DIY garage ideas

To organize a convenient area for placing things, you can independently make a home-made and very roomy rack or shelves. Of course, you can find hundreds of ready-made models in stores, however, making a shelf in the garage with your own hands is much cheaper than buying a similar product on the market.

Same issue with shelving. holding on to independent production space for storing tools, you can not only organize a convenient and practical rack, but also harmoniously fit it into the garage space.

Rules for the manufacture of wood products:

It is better to use hard wood, such as beech, oak, hornbeam.

Before assembly, wood treatment with antiseptic agents is required.

Frame parts must be carefully sanded so that the operation of the rack is safe.

For the manufacture of shelves, it is recommended to use chipboard or plywood sheets, OSB. DVL plates with a thickness of at least 4 mm are also suitable.

The thickness of the material is determined by the loads that will subsequently act on the rack.

Recommendations for making tool shelves in the garage with your own hands

Shelves are installed in cases where the garage does not allow you to put a rack. It is better if there are several designs.

The scheme for creating shelves for tools:

Plan the placement of shelves, determine their size and markup.

Prepare material in the form of boards and fasteners.

Using a perforator, make holes in the wall, install dowels with hooks in them, which will provide enhanced fixation.

Fasten hangers equipped with lugs on the boards. For metal hangers, it is recommended to use self-tapping screws or ordinary nails.

To carry out the fixation of finished products using building level otherwise the instrument may fall from the shelves, making operation unsafe.

At the final stage, you can make a decorative finish of products (paint or special film).

The technology of creating a rack for tools in the garage

To create a rack with your own hands, you will need boards 9 and 19 cm wide. The size of the structure can be adjusted.

Step technology:

A 9 cm wide element is cut into several pieces 18 cm, 27.5 cm and 30 cm long. The resulting parts will be spacers.

A board with a width of 19 cm should be cut into segments 36 cm long. Shelves will be made from these parts.

On the board, which will become the base of the product, it is necessary to mark in those places where there will be spacers. It is recommended to indent on each side by 2.5 cm.

The upper spacer is glued, then the upper shelf, which already has a spacer, is nailed to it. Other parts are mounted in the same way. Installation of the lower spacer is carried out at the end.

The structure should be turned over and the struts should be coupled with screws together with the base of the product.

The surface is carefully cleaned with sandpaper. After that, the product must be covered with two layers of oil-based varnish or another type of finish.

The structure is fixed to the wall with anchor screws. Fixation should be done both under the top and under the bottom shelf.

Organization of the lighting and heating system in the garage

In order for the operation of the garage to be comfortable, the lighting, ventilation and heating system should be properly organized in the room. Since cars are closely associated with the use of toxic and harmful substances, the problem of ventilation in a confined space is particularly acute. For the garage, products are suitable for brickwork. They are equipped with gratings.

Factors affecting the level of illumination:

• garage area, its height;
• the number and nature of the placement of work areas (the size of the workbench for the garage, the viewing hole, the number of machines);
• type of decoration on the walls, its colors;
• indicator power density networks per 1 m?;
• type of lamps for the garage.

For supporting optimal temperature can be used different kinds heating:

• gas;
• based on used oil;
• air;
• electric (infrared heater for the garage);
• furnace;
• water;
• solid fuel.

There are many alternative ways independently organize the heating system.

Features of halogen, fluorescent and LED garage lights

Technical indicators of halogen lamps are in many ways similar to incandescent lamps, however, their bulb is filled with bromine vapor, so the products emit more light. The advantages of such lamps include long service life - 4 thousand hours.

Fluorescent lamps are filled with inert gases inside. From the inside, the flasks are covered with a specialized composition that emits light in ultraviolet under the influence of an arc-type discharge. Recommended models include products with IP-65 class, protected from moisture and dust particles.

Installation of LED lighting in the garage comes with the highest costs. Nevertheless, they pay off with 50 thousand working hours. In terms of efficiency, LEDs are 50% more profitable than fluorescent lamps. At the same time, they do not contain harmful components in their composition, and the light does not have an aggressive effect on the eyes, so there is no need to buy additional shades.

Installation of lighting in the garage: how to make a calculation

To calculate the power of conventional lamps, you can use the formula:

P = S x W/N.

Explanation of values:

• P is the total required power, W/m?.
• W is the power of one lamp, W.
• N is the number of lamps (luminaires), pcs.
• S is the area of ​​the room, m?.

For halogen and LED lamps, the optimal indicator is 16-20 W / m?. This value is suitable for rooms where the ceiling height is no more than 2.5 m. In garages with 3-meter ceilings, this figure should be multiplied by 1.5.

The calculation is affected interior decoration walls of the room. In dark garages, lighting should be brighter.

Light Reflection Level:

To illuminate the viewing hole in the garage, it is recommended to use low-power lamps with halogen or LED lamps, since moisture accumulating in this place can provoke an electric shock. Devices are mounted on the sides in pre-made recesses.

Do-it-yourself autonomous lighting system in the garage

There are a number of principles on the basis of which an autonomous lighting system is implemented:

LED strips are mounted inside the ceiling lamps (300 diodes per element).

The output of the switch is carried out strictly on the shield.

A suspended ceiling system is used for electrical wiring.

The wires are powered by a battery connected to the network through a charger.

The multi-level lighting system for the garage is considered the most optimal. It involves the installation of a large lamp in the middle of the room and the installation of small lamps in work areas.

Height calculation for a multi-level system:

Lights are installed correctly if the machine does not cast a shadow on either side.

How to choose a heater for the garage

Garage heating is carried out using small portable devices that can warm up the room in a short time and further maintain the optimum temperature.

Thinking about which heaters are best for the garage, many mistakenly believe that a home-made device can be made exclusively from expensive components and requires a significant investment of time. For this reason, garage owners refuse this venture.

In fact, to make a garage heater with your own hands, it is enough to limit yourself to budget materials, for example, thermal film. The scheme for creating such a device is very simple and involves the use of the following materials and tools:

• a kit designed to assemble the heater;
• wire, equipped with a plug;
• paper laminate (the area of ​​one element is 1 m?);
• graphite powder;
• epoxy adhesive.

Recommendations for assembling a homemade heater for the garage

Step by step instructions on how to make a heater for the garage:

A mixture of glue and graphite powder is made. The more powder in the composition, the stronger the heating of the device will be. The average temperature ranges from 60-65°C.

Plastic sheets on the rough side are covered with a mixture of glue and graphite, which is applied in zigzag strokes, after which they are fastened with their faces and fixed with a frame made on the basis of wooden slats.

The terminals are fixed to the graphite conductors and the structure is dried. Drying must be complete, otherwise moisture will ruin the device.

After the heater has dried, a resistance test should be performed. Safe heater for the garage is considered only after this check. Until this moment, it is strictly forbidden to connect the device to the mains.

Security restrictions:

It is not recommended to leave the switched on device unattended or leave it near children.

It is forbidden to use equipment that can provoke a fire.

Flammable substances and materials must not be placed near the device.

Making useful DIY garage fixtures

To carry out repair and service work, you will need to build a viewing hole in the garage with your own hands, the dimensions of which will correspond to the dimensions of the car, as well as a workbench for convenient work, plus equip the room with machines.

The basic set of tools and materials for creating a homemade workbench for the garage includes:

• boards and wooden bars;
• fasteners and ties;
• planer and other tools for woodworking;
• varnishing and carpentry adhesives;
• sandpaper and varnish.

An example of placing useful devices in the garage: 1 - a workbench with manual machines, 2 - racks and cabinets, 3 - a table for various repairs, 4 - a shelf for storing tires, 5 - an inspection hole

Do-it-yourself workbench manufacturing technology in the garage: photos, drawings

The workbench consists of a tabletop and underframe, as well as several clamping devices. The height of the workbench in the garage should be selected taking into account your own height. You can take as a guide the height of the kitchen table in the house, at which it is convenient to work. Be sure to draw up drawings to create a workbench for the garage with your own hands.

Arrangement of the garage: how to make a workbench indoors:

The final processing involves the impregnation of the finished product with drying oil and opening with varnish.

Recommendations for creating a viewing hole in the garage with your own hands

There are no specific sizes of a viewing hole in the garage. The dimensions of the car are taken as the basis.

How to make a viewing hole in the garage with optimal parameters:

The width is chosen so that there is enough space inside to work. The size is limited by the distance at which the wheels of the car are planted. Each wheel needs a small area to perform maneuvers. The average width of the pit is 0.8 m.

The length of the pit is limited by the length of the machine. To this figure should be added 1 m.

The height of the garage owner is used to calculate the depth. Another 10-15 cm is added to it.

How to make a viewing hole in the garage using different materials:

The pit breaks out taking into account the optimal width of the pit, the material chosen for the walls, as well as the thickness of the waterproofing layer. Stages of creating a hole:

• markup;
• construction of a pit;
• arrangement of the pit;
• building walls;
• lighting pad.

For waterproofing walls, a specialized hydrophobic impregnation is used.

Scheme for arranging a viewing hole: 1 - walls made of foam blocks, 2 - waterproofing, 3 - rubble masonry. 4 - corner size 50x50x4 mm

Making a press for a garage with your own hands

To create a press, a frame measuring 178x80 cm should be made from 4 pieces of metal pipes. These elements are connected by welding. In the work it is recommended to be guided by drawings, pre-selected or compiled. After that you need to install:

• retainer;
• removable stop;
• bottle jack (hydraulic).

Can be used to review detailed technology creating useful accessories for the garage with your own hands video materials. Such visual recommendations help to navigate in size, master step by step instructions and imagine what appearance the finished structure should have.

Hydraulic press manufacturing scheme: 1 - upper power platform, 2 - nuts, 3 - lower platform, 4 - studs with a diameter of 30 mm, 5 - lower thread of the studs, 6 - bottle-type hydraulic jack; 7 - base 20 mm thick

Arrangement of the garage can be done with your own hands. The list of useful devices does not end there. It can always be supplemented with any interesting ideas. The main thing is that the garage fully meets personal requirements in terms of comfort and convenience.

From time immemorial, a car storage room has been considered not only a place of rest after a hard day's work, but also a unique workshop. Men equipped it, creating various homemade products for the garage with their own hands. On the territory of a small space you need to arrange a huge number of things for convenient use and reliable storage. Entrepreneurial craftsmen do not lag behind their ancestors, but continue the work they have begun, using modern methods and technologies. Consider the popular ideas of original designs for the work area of ​​real men.

When equipping a car parking area, you must follow the basic safety rule. The entrance gate or door should open easily and the passage to them should always be free.

Homemade Garage - A Wise Approach to Upgrading a Space

Almost every motorist can equip a "house" for an iron horse with his own hands. The main thing is to tune in to the fact that this is a constant and lengthy process. It does not hurt to connect creativity, skill and firm determination in achieving the goal. Practical Tips connoisseurs will help create original homemade products for the garage, those who are ready to get down to business. In addition, it brings tremendous satisfaction when ordinary objects turn into a necessary and valuable thing.

Tire storage

Experienced drivers change the “shoes” of their car every season. Where is the best place to store tires so that they do not lose their properties? A simple do-it-yourself homemade garage will solve this sore point forever.

For proper storage of tires, the type of wheel design plays a key role: with or without a disc.

Tires mounted on rims are stored suspended or in stacks. For the first option, simple materials are used:

• metal cables;
• chains;
• luggage straps.

Often they are fixed to the ceiling, load-bearing wall or to the beam, which is located in the upper part of the room. An original do-it-yourself garage craft is driving metal hooks or pins into the wall. They are stuffed over the entire area of ​​\u200b\u200bthe wall, the main thing is that the wheels do not touch each other.

Metal pins should not protrude beyond the edges of suspended structures.

Car tires that do not have discs are stored "standing". Suitable shelves are made for them by welding profiled pipes with a diameter of 30 mm or a corner. The width of the structure exceeds the width of the wheel by 4 times plus 15 cm for free placement on the shelf. The height of the rear part of the structure is 10 cm higher than the outer volume of the tire. Such a do-it-yourself garage fixture is hung on the wall.

The tire storage area must be protected from sunlight so that the rubber does not lose its properties.

A good host has everything at hand

To equip the working area in the garage, experienced drivers first determine in which part to place it. If the room has a rectangular shape, then it is convenient to build a “creativity corner” across the entire width of the back wall.

Such useful device, made by hand for the garage, will help solve three main tasks:

• compact arrangement a large number of things;
• ease of use;
• free movement in the room.

For a wide garage, it is better to place the structure along one of the side walls or as a corner option. In this matter, the owner of the garage makes his own decision based on the size of the room.

A wonderful idea for a garage - do it yourself wooden table or workbench. For the design you will need:

• profiled pipe or metal corner;
• boards;
• moisture resistant plywood or chipboard;
• fasteners;
• set of tools.

With the help of welding equipment, the frame of the future table is made, which is sheathed with plywood or chipboard. Alternatively, the design can be made entirely of wood. To compactly fill the space, shelves are installed under the countertop, where plastic or wooden containers are placed.

In addition, craftsmen use various tricks in the garage - they build a rack of plastic canisters with their own hands. Suitable containers are the same, the handle of which is at the top. One of the sides is cut out, turning the canister into an original car enthusiast's valuables box. Then the containers are installed on a wooden or metal rack, as shown in the photo. Such garage storage systems serve motorists for many years. Since plastic is not afraid of dampness, temperature changes and is resistant to mechanical damage. As a result, the wise master has all the details at hand, which means that he works without distractions.

Folding table for small spaces

A simple design that can be made from an old closet will help to equip a work area in a small garage. For the design you will need:

• chipboard sheets;
• corners;
• several loops;
• mortise nuts for furniture;
• wooden block;
• self-tapping screws;
• anchor bolts.

First, mark up the future design using a level. Through holes are drilled on a wooden block and attached to the wall using anchor bolts. Then the prepared surface of the table is connected to it with the help of moving curtains. The design fits wonderfully into a small room and is used only when needed.

Ideal place for tools

Each driver has a whole arsenal of tools available. Some of them are used quite often, others - once a year. Original homemade garage fixtures are a simple solution to the problem. They contribute to the perfect order in the room, and also decorate its interior.

Organized people who put everything in its place can take advantage of closed boxes for tools and car spare parts.

One of the devices is in a simple way. A metal reinforcing mesh (cell size 10 cm), which is made of wire (diameter 2 mm), is attached to the wall. Some parts of the cage are bitten off, then bent over and made into hooks or crossbars.

Motorists hang on them:

• hand saw for metal;
• watering can for fuel;
• various rubber hoses;
• small car spare parts.

Another way to equip valuable tools for motorists is a shelf for screwdrivers. To do this, the board (about 15 cm thick) is carefully sanded, bringing the surface to a smooth state. Next, drill holes of different sizes (one or two rows). Each of them is cleaned to exclude the appearance of splinters. Attach the structure to the wall using brackets, after which screwdrivers or chisels are inserted into the holes. To store hand tools make a similar device. A board is nailed to a vertical surface. One of its sides is preliminarily cut off so that it is convenient to hang pliers, wire cutters of various types and pliers.

To accommodate battery equipment in the garage, a special shelf is being built. Its upper part has a flat base. At the bottom, protrusions of various formats are sawn, where suitable parts of cordless tools are placed. This approach allows the motorist to quickly find the right things, especially in critical situations.

Portable lighting systems

As you know, there are no windows in the garage rooms. During daylight hours, light enters only through a door or gate. When repairing the bottom of a car, it is very difficult to do without. Experienced motorists are advised to make a portable lamp.

Creating the most simple design, take an ordinary cartridge and connect it with electric wire, at the end of which a fork is attached. For lighting, an ordinary incandescent lamp or a "housekeeper" is suitable. The main thing is to fit under the cartridge.

To protect fragile glass, you can make a lampshade out of it. A milky-colored vessel of medium thickness is suitable, which ideally scatters light. The design is used to illuminate the most hidden places of the car and distant parts of the room.

Compact drill stand

When performing various work in the garage, they often use. The tool needs caring attitude so keep it in a safe place. In addition, it is easier to drill holes on a flat and stable surface without distortions. The original electric drill stand is easy to make if you follow the advice of experts.

To begin with, the main components of the structure are assembled:

• flat area of ​​an old milling machine;
• calibrated tube or rod;
• plywood sheet.

A box is made from thick plywood that matches the size of the electric drill. Two holes are made in it with a drill. Next, the drill is attached to the box using special nuts. The structure is mounted on a rack towards the base. At the top of the rack, next to the bar, fix the handle. A standard ruler is installed along the base, which serves as a limiter for the unit. In this position, it is much more convenient to work with a drill. The holes are even and without visible deviations.

Do-it-yourself useful things for the garage shown in the photo clearly testify to the skill of modern motorists. The main goal of arranging a house for a car is the rational distribution of the working area and the convenient placement of valuables. Thanks to this, it will be comfortable to work, relax and even chat with friends in the garage.

Do-it-yourself garage lathe - video

You just need it - video