We - Professionally manufacture wardrobes
to attic rooms!

The rest do it - by chance
for the occasion!
Selecting Your Cabinet Supplier
After you!

All works presented on the site are made by our Company!

Visit our Channel at - youtube

We offer sliding wardrobes for loftsfrom a well-known German manufacturerRaum Plus.
They fit perfectly into the big ones! spaces located in the attic.

They are distinguished by the convenience of compartment doors and reliability! throughout the entire period of operation.

The advantages of these cabinets - a huge number of materials can be used in compartment doors,
they can also be combined and have any height and width

We use any materials and technologies that are presented on the Moscow market .

/ Volokolamsky district. Private house. Sliding wardrobe in a beveled niche in the attic. Cost 63.000 (Video on our Channel)

/ Volokolamsky district. Cottage. Stylish Wardrobe Coupe, it is also a mini dressing room. Cost 64.000 (Video on our Channel)

/ Zvenigorod. Log house. Sophisticated symmetrical wardrobe in the attic. The facades are decorated with sandblasted patterns and bamboo wallpaper. In the design, a scheme was used that the cabinet does not depend on the seasonal movements of the floor and ceiling. Cost 97.000

/ Domodedovo. Log house. A simple sliding wardrobe with modern "Frameless doors". The latest fashion trend. Facades belong to the PREMIUM class category. The cabinet is made taking into account further shrinkage of the ceiling. Cost 88.000

/ Leninsky district. Modern Sliding Wardrobe with "Frameless Doors". The latest trend in furniture production. These facades are well combined with interiors and belong to the PREMIUM class. The design takes into account the shrinkage of the ceiling Cost 94.000

/ Istra district. Wardrobe in the hallway with a sloping ceiling. Coupe doors are similar in design to interior doors. The cost is 44.000 and 62.000 respectively.

/ Serpukhov district. Vacation home. 2 closets in the attic bedroom. Cabinets are made in one stylistic solution. The cost is 94.000 and 53.000 respectively.

/ Kurkino. Townhouse. 2 attic sliding wardrobes with combined compartment doors. The cost is 87.000 and 52.000 respectively.

/ Pushkino. Cottage. Built-in closet along the bevel of the ceiling in the attic for a schoolgirl girl. Combined with open shelving for study supplies. Cost 102.000

/ Istra district. Log house. Large and sophisticated fully built-in mirror wardrobes in the attic. Facades - "frameless" doors of the RaumPlus 800 series system. The design takes into account the shrinkage of the house. Cost 124.000

/ Bronnitsy. Wooden country house. Wardrobe with frameless compartment doors along the bevel of the ceiling in the attic room. A feature of the cabinet is a cutout in the central doors under the TV. The cabinet is made taking into account the seasonal shrinkage of the ceiling Cost 105.000

/ The simplest budget wardrobes in the attic. Cost 43.000 and 48.000 respectively

/Mitino. Townhouse. Two large attic sliding wardrobes in adjacent rooms. Cost 98.000 and 82.000 respectively

/ Krasnogorsk region. Wooden private house. L-shaped fully cabinet sliding wardrobe in the attic floor. It is made taking into account shrinkage of walls and a ceiling. Decorated with sandblasted mirrors and natural bamboo. Cost 112.000

The versatility of such furniture as a wardrobe is in its versatility: it is a dressing room, a pantry, and, if desired, a study. The dimensions of the wardrobe and its configuration will depend on its purpose. The most demanded today in the furniture market, due to its maximum capacity and functionality, is a corner wardrobe.

Features and Benefits

The peculiarity of the corner wardrobe is that it has quite impressive dimensions, but at the same time it is very compact. It occupies one corner in the room, without cluttering up the room and fully coping with its purpose.

On sale today you can choose a model of any size, depending on what dimensions of the room they are designed for. There are, for example, cabinets of this type for a spacious living room, and there are cabinets for a cramped hallway.

The corner cabinet is designed in such a way that the space is arranged in the best way, there are no sharp corners, and there is a lot of space for other needs. This is very valuable for a children's room, where the corner wardrobe will be simply indispensable furniture.

Also, the advantages of a corner wardrobe include its ability to improve the aesthetic perception of the interior, soften the elongation of the room and give it the usual comfortable shape.

About design features

First of all, such furniture is divided into built-in and cabinet. Cabinet furniture is the one that is sold in the store, and built-in furniture is ordered exactly according to the size of a particular room. The built-in closet has neither a ceiling nor walls, or rather, the ceiling of the room and its walls serve as its roof and side racks. In this case, everything is done in full accordance with the wishes of the customer.

And the cabinet model is a full-fledged cabinet and the entire set that is required for its assembly. If such furniture is suitable for your room, then you can buy it ready-made, but not - then only by individual order. According to the shape of the facade, corner wardrobes differ not only in standard rectangular ones, but there are also semicircular, concave and convex ones - for any style of room.

Kinds

The built-in wardrobe, the facade of which is attached to the structure of the room, is a stationary structure and is distinguished by its efficiency. Its only drawback is that it cannot be moved anywhere. And one more thing: for a built-in structure, it is very important that all surfaces of the room to which it is attached are even. Otherwise, the whole structure will warp and the sliding doors will not be able to work normally.

The corner terminal, as well as cabinet furniture, has everything of its own: ceiling, walls and floor. If the corner wardrobe is with a mirror, then it will not only serve its intended purpose, but also expand the space. Cabinet furniture of this kind differs from the usual one in that it has sliding doors and occupies its entire height in the room, and therefore it is assembled at home, because when assembled it simply would not go through the front door.

Structure and types

There are several such types:

L-shaped cabinet is located between two walls and occupies the corner between them.

Modern wardrobes, made diagonally, resemble a triangle in their shape. Suitable for small room and "eat up" part of the space, limited by two doors or windows of adjacent walls.

A round corner wardrobe, or in another way, a radius one, has a non-standard concave or convex type of doors. Usually, a mirrored dressing room is provided in convex models, unless, of course, this is obtained by the size of the room and closet.

Trapezoidal. The corner cabinet-trapezium is slightly larger in area than the diagonal ones.

In five-wall cabinets it is much more convenient than in other types to use the interior space.

Conventional straight designs no longer surprise anyone, and today there are models that have a semicircular design (radius). In this case, the space of the room can be used most rationally. Differ in ease of use and L-shaped cabinet, and trapezoidal. And the most inconvenient of all is the triangular wardrobe.

Shelves in it are located on both sides, and their capacity is small. The middle of such a cabinet will remain empty, because the filling in this case will be arranged along the walls.

The corner wardrobe can be both with a closed corner element and with an open one. And if your facades are open, then you always need to make sure that there is no clutter, because this will greatly spoil the appearance of the room.

The modular corner wardrobe will allow you to show your design skills when you install a separate module at your discretion.

Today, developers are encouraged to deviate from the usual 90 degrees in the design corner cabinets-coupe and order asymmetric models. Such a cabinet will have a fresh and interesting view, will change the shape of the room itself and "break" its corners. Thanks to the different sizes of angles in such an asymmetrical cabinet, designers have ample opportunity to make each room have a unique look.

materials

The material of manufacture is traditional - wood, chipboard and MDF. The percentage of wood used is small due to its high weight and high cost. Basically, they use laminated chipboard, it has a more affordable price, and the colors are presented in many options.

Such material may be an imitation wood flooring, rattan and so on, or it can be just a plain-colored surface - glossy or matte. In addition, chipboard lamination can occur using films with a graphic or vegetable image.

Radial technique is always possible - rounded corners. They make such a wardrobe from MDF, which are best suited for this. MDF can also be laminated and there is just as much choice in colors.

Color solutions

When choosing a color, you should keep in mind the overall picture of the interior of the room, and the furniture should be in harmony with the shade of the wallpaper in it, with the ceiling and with textiles. Decide on the place where the corner wardrobe will be located and decide whether it should be the center of attention or vice versa, disguised as the general tone of the room.

White is considered a universal color that will suit any home decor. This, first of all, is guaranteed to visually expand the space, and then - clean White color, as if a white sheet of paper will allow you to create design ideas in interior design without any restrictions. A matte white wardrobe is a perfect place in the bedroom, in the hallway, in the living room and even in the kitchen.

Assembly and dimensions

The simplest thing when assembling a corner wardrobe is the height of the product - under the ceiling. But as for other parameters, they will have to be calculated. For example, for a diagonal cabinet with a triangular section, minimum for the length of the sides right angle will be 110x110 cm. If you take less, the volume will be too small, but for some it suits and the wall can take 100 cm, or even less.

From such dimensions (see drawing), mass projects originate, although they have the right to life and calculations with small dimensions (80 cm on one side):

In the case of a small length of the walls that adjoin the corner, an L-shaped design is suitable, and at least one of the walls should be at least 120 cm, the second - less is allowed.

For a small room the best option will also become an L-shaped model. It is not too massive, and takes up little space. To assess the future interior, make sketches of all cabinets on the room layout, and then calculate the area that remains.

Corner wardrobe optimal sizes will have dimensions of 1000x1000 (450)x2400.

About the depth of wardrobes

Two sizes are considered the norm: 60 cm and 45 cm, with a minimum depth of 40 cm. If the width of the cabinet is 60 cm or more, then a crossbar is installed in the cabinet, and then the entire height will be used - up to the ceiling. If the model is smaller, then you will have to use a special bar on which the clothes will hang parallel to the door. After all, the width of the hangers is standard - 55 cm and they simply will not fit in a narrow closet.

How to choose

In a room of a small area, you can install two corner wardrobes at once and thus visually expand its space. And cabinets with a concave facade will make it even more original. The lighting solution is also of considerable importance for a cramped space. With this question, LEDs on the cabinet in the form of overhead lights and light bulbs can help.

To the hall most the best choice will become a wardrobe of a round shape. It looks beautiful, and large in capacity, and multifunctional. And its smooth outlines will create in the hall original design. Will fit in big room and models of concave-convex type - combined.

An excellent choice for a room in which a baby grows is a corner wardrobe. There is a place on the shelves to accommodate all the toys, and if you try, you can even make something like a toy town out of such a corner. And the top shelf, inaccessible to kids, is always at the disposal of parents, who can put there those items that are rarely used.

For the nursery, you can choose a wide variety of models: the facade of the corner wardrobe in the nursery can be painted in different colors or decorated with pictures from your favorite cartoons.

Sliding wardrobes for the attic with beveled doors, although very aesthetic, are rarely offered by manufacturers - it is likely that the bevel angle on the cabinet elements will be wrong.

In this regard, for the attic, doors are usually made ordinary - rectangular, and all the bevels are already in place, the installers adjust on large sheets of chipboard, covering all the bevels on the elements.

A wardrobe for an attic is most often straight doors and a beveled frame, that is, a wardrobe that narrows in depth.

For one-room apartment excellent choice will be the purchase of a cabinet wardrobe, which is placed on one or two adjacent walls. It can be placed on the shelves of the equipment of the music center, plasma, add a small table and two chairs to the atmosphere - and so the wardrobe will become the main place to relax.

Ergonomic padding

When you choose a wardrobe and see that it fits beautifully into your interior, do not forget about its practical purpose as well. This means that it must be with shelves inside and all the necessary wardrobe accessories.

Modern manufacturers of cabinet furniture offer models of corner cabinets, taking into account the dimensions of the room. So, you can equally well choose a spacious corner wardrobe for a large living room, as well as an option for a small hallway.

The peculiarities of corner cabinets include their shape, and because of it there are places with inconvenient access, but you still need to use them. There are such places in each model, in one - more, in the other - less, but their competent filling is the skill of internal filling.

Filling in the Corners

It is difficult to fill narrow triangles in a diagonal and in a trapezoid cabinet. This is a place for shelves, and there are always small things that can be hidden there.

Whatever options for filling the corner wardrobe the designer has thought out, shelves are almost always installed in standard layouts. But there are other options such as compartments that will fit only something narrow and long: an umbrella or skis with ski poles. Or you can nail hooks there and hang ties, belts, and also collect other trifles.

Other content

When difficult places are filled, it will be easier to deal with the remaining space. The main thing is to figure out how many things you have in total and which ones will be placed in what place.

The inside of the closet is usually a filling three types: shelves, drawers and crossbars for hangers. With shelves and crossbars, everything seems to be more or less clear, but what are the boxes for and are they needed at all, and if so, how many of them are needed and what in volume?

If we are talking about a closet in the bedroom, then the drawers will be needed under the linen. Optimally - three boxes, but more is possible. But in the hallway and in the corridor, boxes are not really needed, except for gloves, keys, a spoon for shoes ... One is definitely enough.

Ideas and models

Conventionally, all variants of wardrobes were divided into ready-made models (those from the store) and built-in (custom). In any case, a custom model will always be better. A purchased closet may not reach the height of the ceiling a little, and a custom-made one will definitely be built right up to the ceiling, and it looks much more attractive. A great idea is beautiful built-in wardrobes, if desired, they can be completely invisible, for this their design should merge with the interior of the room.

The insides of the corner wardrobe can be arranged in different ways, this again depends on the idea that the customer will offer manufacturers: how many shelves, what kind, how many and what rods (stationary or retractable), a place for trousers, for drawers and etc. Special ideas can also be about internal fittings and mechanisms, which also affect how efficient and convenient it will be to use the cabinet.

Price

How much this or that model of a corner wardrobe will cost will depend on the choice of material for the facade, on the chosen color of the profile and on what additional components are present.

Before placing an order, you should take into account all the factors that will ultimately affect the cost of a particular cabinet model:

• how difficult it will be to manufacture;
• how long will the wardrobe be made;
• what material;
• cabinet dimensions;
• what company will be engaged in manufacturing;
• whether there will be a sliding wardrobe with or without lighting;
• choice of accessories.

Regarding orders, it is worth noting that it is most convenient to do this online. This will save you a lot of time and money.

Overview of the best models

Corner wardrobes from the Ronikon company make the house spacious and cozy. This company has been on the furniture market for more than ten years, the furniture is very high quality, comfortable, functional and will last a long time. All this applies to corner wardrobes from Ronikon. The demand for them is constantly growing, and this is understandable, because consumers appreciate the comfort and coziness that they create in the house.

The company has offers in the form of standard models of corner wardrobes and those that are made to order.

The Amati furniture company has been known on the furniture market for five years as quite successful. The company manufactures cabinet furniture and is ready to provide its customers with the opportunity to choose a complete set of furniture for both office space and home furnishing.

Amati corner cabinets are sold in many Russian stores, and orders are regularly accepted for individual models.

The work experience of the furniture company "Anna" began in February 1992. The quality of the furniture is ensured by the high quality of equipment using new technologies. The range of furniture, as well as modern materials, is constantly replenished and updated.

The process of manufacturing individual models takes place with constant interaction between designers and customers. In the assortment of the company "Anna": hotel furniture, sanatorium, shop, bank, office, kitchen, bedroom sets, furniture for children, for the hallway. Also in a large assortment here are corner wardrobes of various shapes, different color and different in size.

An attic is a floor under the roof of a private house, inside which the ceiling repeats the bevel of the roof. In each case, the geometry attic space is unique. It depends on the angle of the roof, which varies from 15 to 80 degrees. The attic is used as an office, living room, children's room for boys and girls, but most often there is a bedroom.

As a rule, furnishing an attic presents some difficulty. If the situation is more or less clear with beds and chests of drawers, then a standard wardrobe is not at all suitable for placement under a pitched roof. Of course, you can install it, but after installation there will always be unused zones. But no one will refuse additional square meters.

A direct way to get the right space is built-in wardrobes that fit into all corners of the attic and use every centimeter for business.

Modifications

Such a piece of furniture as a wardrobe is necessary in any room for its intended purpose. To place it within the attic, you can use both a huge attic and a small nook with sloping ceilings and walls. Cabinets fit into a variety of non-standard zones (with a bevel, rounded, with an angle, in a niche). However, they do not lose practicality and functionality.

According to the type of doors, attic wardrobes are hinged and sliding.

Swing models are built into different corners of a complex space with bevels, retaining the advantages of this type of door. Each specific attic has its own characteristics, which are taken into account during installation, after which the cabinets lose uncomfortable or unused centimeters. This door option is suitable for a spacious attic decorated in loft, country or classic styles.

The most functional built-in wardrobes, they are more compact, their use saves a large number of usable space. The universal design allows you to use even corners unsuitable for ordinary furniture. An attic with small dimensions is often decorated in modern style like minimalism. In these styles, wardrobes with sliding doors are appropriate.

Sometimes it is structurally impossible to use a retractable door due to the bevel of the roof. Therefore, in cabinet models large sizes combined different variants doors: use sections with hinged and sliding doors, as well as straight and beveled door models that repeat the geometry with a broken configuration of the ceiling line.

Location options

Conventionally, there are three main variations of attic cabinets:

• Under the slope of the roof. Placement under the slope of the roof is the most in a simple way installing a closet in the attic. It does not require the manufacture of special beveled doors and the use of special fittings. Rectangular doors and rails used in conventional wardrobes are used. However, it uses free space at an angle inside the cabinet that would not be used by installing a conventional cabinet. Interesting solution: a low cabinet with a flat lid, while freeing up space for various little things.

• With one bevelled side. The cabinet is placed under the roof, it rests against the slope and has one beveled side.

• At the wall of the pediment. Attic cabinets are very convenient to arrange under the pediment for a more rational use of the attic space, and other furniture - a bed and a chest of drawers - along sloping walls.

Peculiarities

Cabinets located on the attic floor are unique and have a number of advantages:

• Space saving. For the most effective use places are used every centimeter up to the ceiling. The cabinet is built into almost any form that is under the roof. The contours of the walls and the sloping ceiling are repeated, so the "dead" zones and inaccessible places completely disappear.
• Hiding interior flaws. A closet in the attic is not only convenient and practical, it can hide all the irregularities that appear in a room with a non-standard geometry.
• Versatility. Furniture for storage in the attic space has a filling that allows you to use it to store a variety of items.

materials

For the production of furniture facades that adorn attic products, the following are used:

• mirror;
• glass;
• wood;
• combination of different materials.

Glass doors are very effective and diverse, they are matte, transparent, as well as colored, decorated with photo printing or sandblasting.

Filling

The contents of the cabinets under the roof are in no way inferior to the filling of standard furniture: shelves and hangers are used, which in this case can be pulled out. Accessories for these products are different great variety elements: shelves, boxes, pantograph, baskets, holders and other fixtures. Drawers of any extension system are used in low cabinets located at the bottom of a sloping wall.

Practical Ideas

Cabinets for installation in the attic differ from standard furniture, so most often they are made independently or ordered from craftsmen.

Budget options

You can save money by using a standard cabinet, and make a beveled corner a niche and use it to store things of different sizes. The corner niche can be closed with a do-it-yourself door, or left open.

Another option is the complete rejection of the doors and the back surface. It is enough to mount the frame, beautifully fix the rods, shelves and other accessories for storage on it - you get an open-type dressing room.

The selection of an attic cabinet is complicated by the presence of walls with different heights and their slope. This does not allow you to put a cabinet of the required size close to the wall. It is not always possible to order a built-in wardrobe. You can do the following: purchase a finished low product with a height of 90 to 120 cm, and upper part build on your own. This will cost much less and you can use the entire area of ​​​​the wall.

All over the wall

gable roof in the interior of the attic can be used by placing the cabinet along the pediment. Both slopes will be involved here. A massive storage system can be used as a partition between rooms. Here the role interior door will perform the cabinet door.

Under the slopes

Even the lowest and dead zones (height from 60 cm) cannot be left idle, losing such a necessary space. It can become a convenient and almost invisible storage method. Low built-in chests of drawers, as well as long shelving at the bottom of a sloping wall, can be used to store a wide variety of household items.

Under the slopes of the roof, occupied by windows, chests of drawers occupy traditional place. The height of the products is up to the windowsill. Options for using space at the bottom pitched roof may be dressing table or computer desk.

Mirrors

Unnecessary walls are visually dissolved with the help of mirrored facades. If the room is narrow and long, you can place mirror cabinets opposite each other along the walls.

4307 0 0

Sliding wardrobe with a beveled corner for the attic: types, dimensions, design

The slope of the attic ceiling and the low wall prevent the use of traditional furniture. The complex geometry of the attic space can be equipped using a wardrobe with beveled sides. Consider possible models, materials for construction, ideas for filling attic corners.

Features and Benefits

An ordinary cabinet installed in sloping ceilings and walls will not be able to fully utilize the room. The attic wardrobe has non-standard shapes; slanted doors or tilted back of the cabinet.

Unlike conventional cabinets, it has a lot of advantages:

• The compartment facade saves space.
• Thanks to its shape, it allows you to use the entire area up to the ceiling.
• By repeating the contour of the wall, the cabinet rationally uses the beveled corner of the attic and uses "dead zones".
• Softens interior flaws.
• Allows you to model the internal content.

Design features of attic cabinets

The attic cabinet does not have a specific shape - it repeats the outlines of the place it occupies. There are many design options, they all depend on the location.

Consider popular places and shapes, this will help you choose the best position for your furniture:

A photo	Description
	Option 1. Sliding wardrobe under the attic bevel The upper floor in houses with a sloping roof has a large width. If the room is not divided into rooms, then the closet is built along the entire wall. The end door rests against the roof slope and takes the appropriate shape. The middle parts of the facade do not differ from the standards - they are rectangular.
	Option 2. Wardrobe in the bevel of the attic The functionality of the design does not differ from the classic compartment options. Doors have the usual shape. The inner part forms a trapezoidal or triangular shape.
	Option 3. Sliding wardrobe in both bevels of the attic For the full use of a narrow attic, the cabinet is made from slope to slope. The central part of the facade remains standard, the outer doors have been modified. The opening of all valves is directed towards the middle.
	Option 4. Direct attic cabinet with modules The optimal solution using modules allows you to install a purchased cabinet in the center of the wall. The bevelled corner is filled with modules: cabinets, bookcases, dressers, shelves, shelving.

Beveled compartment doors

There are two options for mounting compartment doors:

1. A fully beveled door ends in a sharp corner. There is no possibility to use a suspension system. The door leaf is installed on the lower rail, the second part of the mechanism is located in the middle.
2. Half/partially beveled top, has top rail and moving roller, mounts like a normal coupe.

Structure and types

In the room under the roof, you can use any cabinets. It all depends on your preferences and the features of the attic. Consider best options allowing rational use of space, with minimal cost for furniture.

A photo	Description
	Beveled wardrobe with sliding doors Must have at least 4 doors. This is due to the opening system. The outer door leafs have a non-standard fastening and need support when open. The shift passes along a full-fledged rail, on which an average standard sash is installed.
	Wardrobe accordion Indispensable for a narrow room. Hinged sashes have small size, move along the lower guides.
	Hinged cabinets May have partially or fully beveled doors. In some cases, combined models with a sliding system are used.

materials

There are no restrictions on the choice of materials. All traditional materials are suitable for attic cabinets:

• MDF and chipboard have affordable price and nice appearance.
• The mirror opens the perspective of the room, enhances the lighting. For facades, a particularly durable mirror with a protective film is made.
• Matte, glossy, textured, patterned glass is suitable for stylish interiors.
• Plastic - a practical option, requires a minimum of effort to maintain an aesthetic appearance.
• Leather - exclusive, expensive, exquisite.
• PVC film - huge selection colors and textures, budget rates.

Color solutions

Furniture design depends on the degree of illumination and the orientation of the windows. For example, the south side always gives more light.

Closet dark color, in a room with small windows facing north, will make the attic a gloomy attic. It is appropriate to use the furniture facade of pastel or bright colors.

In a bright room, you can install a bright wardrobe, but at the same time equip the windows with thick Roman blinds or louvered structures. This will help to balance the daylight with the colors of the furniture.

In interior design, according to the rules, three colors are used. Each can have the same number of shades. Following this recommendation, you will get a cozy, charming attic.

The choice of cabinet color is made taking into account the height of the ceiling, the size / number of windows, the intake of daylight, the finish of the walls, the quality of the textiles and the lighting.

Dimensions and installation

A variety of house projects make it impossible to buy a ready-made, suitable in size, attic cabinet. The owner has two options: order from the master or make furniture with his own hands. Let's consider the second option.

Measure the selected wall, make a drawing, calculate the materials. You will need parts for the body and plinth (laminated chipboard with a thickness of at least 19 mm), rear walls (3.2 mm).

Ceiling, wall, skirting boards, plinth cladding, doors. You also need to buy fittings, screws, edge tape, glue.

Assembly

The frame is built on site, in accordance with the available dimensions. The main parts can be fixed to the walls of the room. In long bars, grooves are selected for overlapping parts. All end cuts are closed with edging tape.

The front panel is installed on the plinth strictly vertically and fixed on the supporting structure. The sections are assembled separately and attached to the clamps through the side walls. Corner strips are mounted, in the form of a ceiling, side plinth. So that the screws are not noticeable, they are driven from the inside.

Dimensions

The parameters of the cabinet are completely dependent on the height of the ceiling in the ridge, the angle of the slope and the width of the room. The attic sliding wardrobe can have a height starting from 60 cm.

A model with two beveled doors has at least 4 wings, so it cannot be made small. The minimum length is 160 cm, while the width door panels- 40 cm. Wardrobe with one bevel - from 120 cm.

Depth of wardrobes

Any models are built in the attic. The bevel of the roof makes an adjustment to the dimensions, but the widest part is not less than 40 cm. The most convenient depth is 60 cm.

The cabinet, resting with its back against the bevel, has an increase / expansion in the lower part, it can reach up to a meter near the floor. A depth of more than 70 cm is considered uncomfortable, with a hand up to rear wall reaching is problematic. Pull-out baskets / drawers and sections on wheels help to eliminate this problem.

How to choose

Paired with modular elements, you can buy a cabinet wardrobe. Its height and width must match the installation location. Based on the angle of the roof bevels, the width dimensions will vary with height. The higher the cabinet, the narrower it will be.

A bedroom is usually arranged on the attic floor, so the closet should have enough shelves and drawers for linen. The presence of mezzanines will allow you to store guest sets of pillows and blankets.

How to fill in the corners

In addition to sliding wardrobes with beveled doors, the corner space can be filled with built-in cabinets, equipped with closed niches or open shelves.

Often a low cabinet is bought, a chest of drawers 80-120 cm, and a rack is completed above it or shelves are made. This economical option allows you to use all the space.

Low corner areas under the attic windows are considered "dead". If there is 60 cm or more under the window, build a frame for compartment or swing doors there. In such a closed corner, you can keep any items, including a vacuum cleaner and other equipment.

Ideas and models

The functionality of the attic floor is increased by built-in furniture. Consider a few interesting ideas and designs.

Interesting solutions in interior design

Sliding wardrobe with beveled doors can be built under the stairs leading to attic floor. If all doors have a bevel, then only a swing system is suitable.

It is not necessary to build a monolithic model under the roof slope. The wall can be broken into pieces and visually enlarge the room. Place a desk between the cabinets. You can take this place for a mirror with a dressing table.

Mirror facades fill with light, “push apart” the walls. The mirror can cover all doors or just one. Combined options work well, where mirror inserts occupy half or a third of the facade.

A small room needs light furniture. The closet, located in the entire pediment, will not "eat" the room, but will expand it.

Conclusion

The attic cabinet helps to use non-standard areas and make a complex room beautiful and functional.

In the presented video in this article you will find additional information on this topic. Tell us about yours in the comments country house and the interior of the attic floor.

August 2, 2018

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

Brief description of the project
Dimensions:
- width 3720mm;
- depth 600mm;
- height 2590mm.
Material:
- body elements are made of laminated chipboard.
Colour:
- wenge.
Design features:
- built-in, without back wall;
- office under a step-ladder;
- two-door sliding wardrobe;
- beveled cabinet with hinged door;
- sliding and hinged doors of the Russian Aristo system;
- filling the doors with a silver mirror with a sandblasted pattern;
- in the open part of the hallway, a chest of drawers with a wall mirror and a hanger with hooks.
Accessories:
- longitudinal hanger for clothes;
- Full extension drawers.

The wardrobe is one of the most modern species home furniture. It differs not only in capacity, but also in compactness, and also saves space in the apartment thanks to sliding doors. Sliding wardrobe with a picture on the mirror in the hallway is very good combination style, comfort, practicality and convenience.

If you look at the dimensions of the proposed model (height - 2 m 59 cm, depth - 60 cm, and width is 3 m 72 cm), then we can conclude that it is suitable for arranging almost any hallway, moreover, it can accommodate not only outerwear, but also other household items.

This cabinet is a two-door, and glass with a pattern is used as doors. The presence of glass in the hallway is mandatory, because before leaving the house you need to make sure that your appearance. Also, the cabinet is equipped with a swing door with a mirror surface, and it closes its beveled part. This design is quite convenient, because the beveled part provides additional storage space, while saving space. Both swing and sliding door manufactured by the Russian manufacturer Aristo, which indicates high quality and affordability.

Shelves and compartments are designed for convenient storage of bags, gloves, hats, hats, umbrellas and shoe care products. There is a compartment with a hanger, which is represented in this case by a rod-pipe. The upper shelves can be reserved for those things and items that are not in great demand. There is a handy ladder compartment.

The model is complemented by an open part, which consists of a chest of drawers of a longitudinal shape, a mirror, as well as a hanger for outerwear. The hanger has several reliable hooks located at different heights, which is very convenient for storing things of different sizes. In the drawers of full extension, which the chest of drawers is equipped with, various little things and accessories that should always be at hand will find a place. The mirror has rectangular shape with cut corners, which gives it a special charm and grace.

Design is the first thing that guests often pay attention to. This wenge-colored wardrobe, which is made of modern chipboard material, stylish and modern design. It gives a special charm and status to the hallway, because it looks very rich and respectable. The sandblasted pattern of the mirror in a discreet style very organically emphasizes the shape and style of the entire hallway.