Porch 

Do-it-yourself fastening on a chair for a child. Practical tips on how to make a highchair with your own hands, which will be comfortable and safe. Beautiful children's high chair from artisan brothers

When it comes to wooden furniture for a child, many parents wonder - is it possible and how to make a children's highchair for feeding with their own hands according to the drawings? There is only one answer - of course, you can, if you know how to hold a planer, saw and hammer in your hand. The main thing is to decide what kind of wooden chair you need to make - folding (regular), transformer, growing, or simply sewing mobile from fabric. In this article, we will focus on a regular folding chair, and take a closer look at its example, how to make a do-it-yourself highchair for feeding, and also show impromptu diagrams with dimensions.

Do-it-yourself baby highchair drawings diagram dimensions - getting started

To get started, we suggest that you familiarize yourself with the video, which can inspire you to make a folding wooden children's highchair for feeding with your own hands. Of course, the video has flaws. There are no drawings, no step-by-step demonstration of how and what is being done. The author of the video himself said that he took the dimensions out of his head. He shows what he has done. However, if without exact dimensions and having only a rough plan, you can do SUCH, then it's easy. He made an excellent chair, and this cannot but inspire him to create his own masterpiece.

Usually, before you start making something yourself, you need to clearly define the type of chair and its dimensions. To do this, sketch out at least a rough plan on paper. For more experienced craftsmen, it may not be needed, but the dimensions are still needed.

So, what is a classic folding wooden feeding chair? Seat with a small table, located on high legs that fold. The table and seat can also be folded. Only the back and front legs remain stationary.


In order not to reinvent the wheel, the scheme can be searched on the Internet. There are several of these do-it-yourself baby highchairs with drawings and dimensions. Most good options shown in the picture.

When deciding on the size, first of all, you need to know the height at which the chair itself is located. Optimal Height the legs of a folding wooden chair are about 80 cm (800 mm). At this height, it is convenient to feed the child - there is a table and armrests on it. The seat itself is located at a height of 60 cm (600 mm) from the floor. But the legs will have to be done exactly according to the height of the table.

In general, when choosing the height of the legs of a do-it-yourself highchair for feeding, you should follow two rules:

  1. It should be convenient for parents to feed the child, and not bend down next to him in three deaths. At the same time, the height of the chair should be such that the grown-up baby, if desired, could climb into it himself.
  2. It is very convenient that the chair in its unfolded state enters with its small table under the usual large table, or is flush with it. So you can not only feed the child while being at the big table yourself, but also let him play at this big table, or let him just be next to you at the table. Choose your option.

Do-it-yourself highchair for feeding - looking for the right material

Generally wooden furniture best made from conifers tree. Bars of them are cheaper and the easiest to work with. However, both spruce and pine can release resin, which is highly toxic and may not be good for babies. Therefore, a do-it-yourself highchair for feeding (and in general, all products for small children) is best made from linden. Lime bars are also easy to process, but the linden does not emit poisonous resin.

After you have decided on the type of tree, you need to prepare (buy, find in the bins) the required number of bars and boards from which the details for the future chair will be cut. And for this you need to choose a suitable scheme or drawing of a baby highchair with dimensions in order to have a clear idea of ​​what parts you will make it with your own hands.

So, we liked the following scheme, then the spare parts for the high chair will be as follows:

  1. 4 long bars per leg (80 cm each)
  2. 2 transverse strips located between the legs below - the main support for the high chair (450x60 mm)
  3. Side "high chair walls" - 2 pieces. (200x200 mm). The legs are attached to them.
  4. Armrests - 2 (400x30 mm)
  5. 2 planks between which the back of the chair is attached (170x20 mm)
  6. 2 rear crossbars - located between the two hind legs, the seat (310x30 mm) rests on the top.
  7. Table - 1 (500X200mm)
  8. Seat and back (300X300mm), (400X300mm)
  9. Two crossbars located between the front legs. They play the role of steps so that the baby can climb onto a chair on them. And also they are needed so that the legs of the chair do not spontaneously disperse in case of poor fasteners. Although, ... they play a secondary role, so making steps is optional. (310X60mm).

The thickness of all bars is 25 mm. This is quite enough for a toddler up to 20 kg - the design will withstand. Of course, if he doesn’t jump on a chair like on a trampoline, well)

Folding wooden children's highchair for feeding with their own hands - preparing the details

As an example of a do-it-yourself folding wooden baby highchair, you can use the following videos. It first shows the phased production, and then the final result of production. The author tells what and how he did. A glimpse shows the dimensions and a rough plan. However, even such a short review is quite understandable in order to learn from his experience and make your own chair.

After you have decided on the number of parts and their sizes, have found the right material, you should go directly to their cutting, sawing. For this, it is most convenient to use an electric jigsaw. Those who deal with carpentry will understand me, because not everyone has a machine at home. After all the details are cut out, you need them CAREFUL clean from burrs, then sand (treat) with sandpaper. Small children not only feel everything with their hands, but also try it on the tooth. So once again ATTENTION. no burrs, the safety of the baby directly depends on this. No one needs extra injuries and splinters, so we do it thoughtfully and with passion.

When all the details are cut out, processed with sandpaper, you can proceed directly to the assembly of the chair.

How to make a do-it-yourself highchair for feeding - assembly


Now, having ready-made spare parts and a plan in my head, to the question of how to make a highchair for feeding with your own hands, there is only one answer - to assemble. For assembly, you will need self-tapping screws, hinges, wooden or metal dowels. So let's go.

  • First, the sidewalls are screwed to the front legs (processed bars).
  • At the back, two strips are screwed to the sidewalls, between which the back will be located
  • Screw the back to the planks.
  • Install hind legs. They are attached either in the center of the sidewall, or in the middle to its upper part. It is the hind legs that become mobile.
  • Screw on the crossbar on which the seat rests. After that, you can screw the rest of the transverse strips, including the lower ones, on which the chair will directly stand.
  • Attach a seat. It is mounted either on small loops or on couplings that fasten pipes.
  • Screw the armrests to the table
  • Attach the armrests to the chair. They are attached to the back bars, to which the backrest is screwed.

Chair assembly completed

DIY highchair for feeding - the final stage

After the do-it-yourself baby highchair is made and assembled, you should take care of the soft seat, in other words, the comfort of the baby. To do this, foam rubber is glued to the back and seat, after which the seat is upholstered with washable oilcloth in bright colors. If the foam rubber does not stick stubbornly, then we fasten it with furniture staples or just large staples and a construction (furniture) stapler. Oilcloth can also be attached with a construction stapler, here you can take small staples.

The finished chair must be painted or stitched. At the same time, paints should be used ATTENTION., exclusively ACRYLIC, and varnishes NON-TOXIC. This is necessary in order not to harm the health of the child, and suddenly he decides to try the chair for a tooth.

DIY baby highchair - which is easier to make or buy

And now, after sweating and, finally, having done it, let's ask ourselves a question - is it easier to make or buy a children's highchair for feeding with your own hands? Today, most parents don't bother. And they just go to the store and buy the chair they like. In general, this is justified. Of course, if you buy ready-made material and make a chair yourself, you can save on money. Especially when you consider that folding wooden chairs from well-known manufacturers are not cheap today. However, an ordinary purchased wooden transformer is comparable in price to a hand-made folding chair. Therefore, if the question is which is easier: do it yourself or buy it, then the answer is unequivocal - it's easier to buy.

Another thing is, if you like to do everything yourself, there will not be such a question here. In addition, if you often make something, then you will certainly have a large supply building material. Then you won’t have to spend much money, but only to sort out long-term blockages, which is also not bad.

Ultimately, you will decide what is preferable for you, but I want to say to beginners: any dad can make a simple folding wooden children's highchair for feeding with their own hands. You don't need to be a professional carpenter to do this.

With the birth of a small child, mom and dad have more worries. And one of them is the purchase of high-quality furniture for your baby. But the main problem is that such interior items are not cheap. And a young family cannot always afford to buy a new and high-quality bed or changing table.

Quality children's furniture is quite expensive. Therefore, it is better and cheaper for parents to assemble furniture for their child with their own hands.

But children's furniture can be assembled independently.

For example, a do-it-yourself highchair can be made in just 3-4 evenings.

At the same time, 2 tasks can be solved at once: save the family budget and assemble a design that will be convenient for you and your child.

Initial stage of work

For the safety of your baby, the chair should be made with short legs.

Before collecting, remember that it must be safe for the baby. The future design must be reliable and stable. Do not make legs too high. Of course, it is more convenient to feed a child when you do not have to bend down. But from such a chair, the baby can fall.

When choosing materials, give preference to natural wood and hypoallergenic paintwork. It is most reasonable to simply carefully sand the highchair and cover it with stain. If you want to paint it, then opt for water-based coatings.

The wheeled design is much more convenient and mobile, but not stable enough. If you do not provide a system of stoppers, then the child can shake his "throne".

Making a highchair is not difficult at all if you prepare detailed drawing future design. An example of such a scheme is shown in Fig. one.

Be sure to indicate on the drawing all the necessary dimensions. This will help you avoid mistakes in the manufacture of blanks.

Usually, furniture intended for children is made from natural materials. In this case, you will need:

  • timber, section 10 * 20 cm;
  • board, about 2 cm thick;
  • plywood for the bottom seat cover;
  • 1 sheet of fiberboard standard size.

It is most reasonable to choose soft varieties of wood. For the manufacture of a highchair, pine or wood of other conifers is perfect.

But experienced craftsmen especially appreciate linden. It is somewhat more expensive, but it is easy to process, and products made from it are more durable.

Back to index

Tools and workpieces

In addition to the material for assembling the body, stock up on nails, screws and dowels to assemble and fasten all the nodes. The sockets for the main fasteners must be lubricated with carpentry glue, but regular PVA is also suitable. This will ensure the reliability of the design.

Think in advance how exactly you will soften the seat. Usually, furniture foam rubber 1.5-2 cm thick is used for this. But a pillow can also be made from a clothing padding polyester by folding it several times. In addition, you will need fabric for the upholstery of the seat and materials for painting the chair. It is most reasonable to purchase materials with water-repellent impregnation. Then the chair can be easily cleaned.

To assemble such a design, you will need the following parts:

  1. Chair legs - 4 pcs. (in the above drawing, their length is 39 cm).
  2. Lower cross rails - 2 pcs. (length 34 cm).
  3. Side cross rails - 3 pcs. (length 30 cm).
  4. Front transverse rivers - 2 pcs. (length 22 cm).
  5. Back and seat (each of these parts consists of 3 elements, dimensions 30 * 25 cm).
  6. Table top (20*34 cm).
  7. Sides with rounded edges - 4 pcs.

It is wiser to prepare the tools necessary for work in advance. This will allow you not to be distracted from the assembly of the chair. You will definitely need:

  • hacksaw or jigsaw;
  • screwdriver;
  • a hammer;
  • grinder or a special nozzle for a drill;
  • a set of sanding paper of varying degrees of graininess;
  • brushes.

After you have prepared everything you need, you can start assembling a baby highchair for feeding.

Back to index

Making a high chair

Before assembling the chair, prepare 4 well-sanded legs.

The manufacture of this design must begin with the formation of blanks for the main parts. Take a bar and cut it into pieces of the desired length. You will need the following items:

  • legs;
  • top, bottom and side cross rails;
  • front cross bars.

Sand all blanks “roughly”, removing large burrs and irregularities. Especially carefully process the joints and fasteners.

Next, make the sides of the seat. They are sawn from boards. When pre-marking, follow the direction of the wood fibers. If the parts are located perpendicular to them, then the chair will turn out to be more durable and reliable.

The top edge of the sides should be rounded. The easiest way to form such a rounding on a carpentry machine. But if you do not have such equipment, then a planer will help to cope with the task. Bevel the blanks, cut off the excess with a knife, and then sand the edges.

Blanks for the back and seat are sawn from a sheet of fiberboard. To make the chair more reliable, it is more reasonable to make these elements composite. To do this, prepare 3 identical parts, which are glued together using wood glue. Then they are placed under the press until completely dry. In the future, each glued part is processed as a single element. The front corners of the seat, the upper edges and the corners of the back must be made semicircular. Rounding is done in the same way as on the side skirts.

Back to index

Assembly of parts

To fix the structure, you will need wooden dowels.

When all the blanks are processed, you can begin to assemble the structure itself. For fastenings you will need wooden dowels (thorns). They can be purchased at stores that sell products for making and repairing furniture, or you can make your own. To do this, you must first create rectangular blanks with a section of 0.8 * 2 * 5 cm, and then round the sidewalls using a carpenter's knife.

In all parts in which fasteners are provided, it is necessary to pre-drill nests for dowels. Holes should not be through. Drill the wood so that the bottom of the nest does not reach the surface by about 1 cm.

Clean all holes from dust and small chips with a damp brush and coat them thoroughly with glue. Then, using a mallet, drive the spikes into them and leave to dry completely. Some experts recommend additionally strengthening the fasteners with nails and screws. In this case, it is necessary to ensure that the caps of the fasteners are recessed into the surface of the parts. Otherwise, the child may be injured by the protruding sharp edges.

The assembly of the structure begins with the attachment of the base, which consists of sides, legs of the chair and crossbeams.

With the birth of a baby, his parents have a lot of worries. One of them is the purchase of a chair for feeding. Meanwhile, it is quite expensive in children's stores. In order to save on its purchase, you can try to make a high chair with your own hands. By and large, there is nothing complicated here. The main thing is to adhere to the recommendations presented, act step by step and carefully study the drawing.

The main thing to remember when making a highchair for a child is safety. The design must be strong and stable.

Making a wooden chair

Before you make a highchair, you should prepare the following tools and materials:

  • saw;
  • a hammer;
  • bars with a section of 400x200 mm;
  • board (thickness 20 mm);
  • fiberboard sheet;
  • nails;
  • batting;
  • dowels;
  • the cloth;
  • glue;
  • brush;
  • sandpaper;
  • gloves to protect your hands from splinters during work;
  • plywood.

You will also need to purchase paintwork material. But you need to choose non-toxic. One that has an acrylic base will do. Such paints are modern and safe.

Back to index

Stage 1: we make parts

It is necessary to start making a highchair with the manufacture of parts for it. You will need to do the following:

  • 4 legs (length 390 mm);
  • 2 bottom rails (length 340 mm);
  • 3 crossbars (length 300 mm);
  • top rails (length 220 mm);
  • 1 small tabletop (dimensions 200x340 mm);
  • 4 rounded elements.

To make such details, you need to take the bars and cut them in half. From them, legs are first created, then the upper and lower crossbars, and then the crossbars. They will need to be treated with sandpaper to prevent splinters from appearing in the baby, because he will grab the handles for all the details of the chair.

Now you can move on to creating rounded elements for the sidewalls. They need to be cut out of the board in order to get the most durable and reliable chair, a drawing of these parts is presented.

It will be necessary to make a similar markup on a wooden board. The scheme must be drawn so that the fibers of the material are perpendicular to the bend angle. Then the finished part will not lose its strength over time.

The back and seats need to be cut out of fiberboard. From it you will need to make 6 parts. Their size should be as follows, 300 * 250 mm. They should have two rounded corners. The ends of such parts will need to be carefully sanded. After that, it will be necessary to glue 3 identical parts together, and then put them under a press. And the last thing that needs to be done is to cut the countertop out of plywood. Its size should be as follows: dimensions 200x340 mm.

Back to index

Stage 2: we assemble the chair

Now you can start assembling the high chair. First you need to make rectangular dowels. They are carved from wood. Their size should be 8 * 20 * 50 mm. Under them in the details it will be necessary to make holes up to 40 mm deep.

They will need to be fixed with glue, and then additionally with nails. But it will be necessary to sink their hat into the surface of the wood - this will eliminate the occurrence of injuries and cuts in the child.

Start assembling the highchair from the sidewall. It consists of 2 rounded parts, legs and bottom rails. First of all, the last 2 parts are fixed together with glue, dowel and nails. Here it is necessary to ensure that the connection occurs at an angle of 90 degrees. Then you can assemble the top crossbar and 2 roundings between them. The second sidewall will need to be made similar to the first. In this case, during assembly, it will be necessary to compare both elements several times in order to make sure that they are identical. The created sidewalls will need to be processed with sandpaper.

Next, you will need to connect the seat and back together. Here you can use screws and a corner. After that, you will need to wait until the glue on all the parts is completely dry, and then it will be possible to assemble the entire highchair.

The sidewall is connected with the help of crossbars (length 300 mm) and dowels. First you need to make holes for them. Then, in addition, the structure is fixed with nails. Then you will need to attach the legs to the lower and upper slats, and then install the crossbars. A tabletop is fixed from one of the ends.

After that finished construction additionally processed with sandpaper. Then she covers paintwork material and left to dry. Then you will need to cover the seat and back with fabric. But first you will need to lay a batting under it and fix it with a stapler. Such a lining will allow the baby with maximum comfort sit on a chair. On this work on its creation will be completed. Which means you can use ready product by appointment.

Back to index

How to make a mobile feeding chair?

It is not always possible to take a wooden high chair with you to feed your baby. After all, it is large enough and cannot be transported. And here, many parents may have a question: how to make a mobile highchair for feeding with your own hands? Here also without step by step instructions not enough. But first you need to prepare the following:

  • fabric (cotton, linen, lining) - about 3 m;
  • slings - 2.5 m;
  • carabiner buckles - 3 pcs;
  • thick and strong braid - 3 m;
  • scissors;
  • needles;
  • threads;
  • sewing machine.

When a baby appears in the house, new items appear that he needs. And of course, every parent wants to get all the best for the child. And what could be better than making your own. After reading our article, you can effortlessly make a baby highchair with your own hands. Drawings, dimensions, diagrams - all this will be discussed. And most importantly - it will be comfortable and safe for your baby, because you will be sure of the quality of the selected materials and the reliability of the assembly of the entire structure.

DIY high chair

Your baby will need such a feeding chair when he is six months old, and he begins to sit up on his own. On the chair is the formation of the musculoskeletal system of your baby, and his posture. This will be his first property, thanks to which he will get acquainted with the outside world.

That is why a highchair for feeding should be not only comfortable, but also useful.

General requirements

In order for this piece of furniture to turn out to be practical and comfortable, you need to consider the following nuances:

  1. The chair should not be soft. In order for the child's skeleton to develop correctly, the body must feel secure support. But on a highchair, you need relatively thin soft pads on the seat and back.
  2. Chair material. It is important for a child to use non-toxic, natural, for example, wood, plywood, chipboard.

Important! Do not use plastic, as it contains not always harmless substances.

  1. Chair dimensions. In order for your baby to feel comfortable on the seat, you need to correctly calculate the height of the backrest and the length and width of the seat.

Important! There is a special table, which is made for children's furniture. According to this table, we determine that the height of the seat of the chair should be 20 cm if your child's height is from 80 to 90 cm, and the width, depth is 33 and 26 cm, respectively.

Feeding chair options

The child begins to eat at the common table, starting at six months. Of course, it is necessary that the baby eats with all family members. Designed for convenience various options, but putting the baby in a homemade chair, you must be sure of his safety.

Designs of children's chairs for feeding:

  1. A chair with high legs is made on long legs. Sitting in it, the baby will be on the same level with everyone sitting at the dining table.
  2. Soft cover - looks like a slim, which is attached to a regular chair. This option can be taken with you to the country or to visit.
  3. Combined chair - a small chair with restrictive rings is placed on a low table.

Material selection

For the manufacture of a chair suitable wood coniferous pine or spruce. This type is quite durable and easy to process, the wood texture is pleasant to look at.

Carpentry tools:

  • nails, sandpaper;
  • loops, self-tapping screws, dowels (special connecting elements);
  • saw;
  • a hammer;
  • glue for wood;
  • fiberboard sheet, plywood;
  • fabric, batting or synthetic winterizer;
  • varnish or paint for finishing, brushes.

Important! Choose acrylic-based paint, and non-toxic water-based varnishes, because your baby can not only breathe them, but try them on the tooth.

Do-it-yourself combined highchair

We offer detailed description stages of work on the manufacture of parts and assembly of a combined chair for feeding. Here you need to make a chair and a table separately. This assembled option can be used by feeding the child at a common table, and after disassembling it, you can sit the child behind it for various games and activities.

Procurement of parts

The first stage is the preparation of all the details for this chair. You need to prepare the following materials:

  • timber with a thickness of 200x400 mm - for legs and crossbars;
  • a small board with a thickness of 200-250 mm - for cutting out armrests;
  • fiberboard sheet 2x2.1 m for the back and seat;
  • plywood for countertop.

Preparing parts for the chair

To make a chair, you will need the following parts:

  • 4 children legs - workpiece length 390 mm;
  • 3 children transverse bar - 300 mm long;
  • 4 children rounded elements;
  • 1 children tabletop 200x340 mm (can be changed to your taste);
  • 2 pcs. - upper crossbar size 220 mm;
  • 2 pcs. - bottom crossbar size 340 mm.

Important! In order for your do-it-yourself baby highchair to turn out beautiful and even, the dimensions of the parts must exactly match the drawing.

Making parts for the table

It will require:

  • 4 legs 500 mm long;
  • 4 cross rails size 340 mm;
  • 4 plates 410 mm long;
  • plywood for countertops with dimensions of 380x450 mm.

Important! You may not buy everything necessary materials, you can choose the right size using items that are unnecessary in your household.

Now we have already reached the main stage - the assembly of the entire structure. Be attentive and accurate in your work, do everything perfectly, because you are trying for your child, which means that you must ensure him, first of all, safety and convenience.

Wood preparation:

  1. During production, the wood beam is sawn into certain dimensions. After cutting the parts into sizes, you need to remove all irregularities, roughness, scratches with sandpaper.
  2. The detail of the rounded element of the sidewall for the high chair must be rounded off using a carpentry machine or an electric jigsaw.

Important! It is necessary to make roundings of the sidewall according to the drawing of the children's high chair.

  1. It was necessary to fasten with the help of dowels (can be purchased in the furniture fittings department). In extreme cases, the use of self-tapping screws is allowed.

Mounting process:

  1. At the attachment points on the board or bar, we cut or drill holes with a depth of 30-40 mm using a drill.

Important! Carefully make holes without drilling through the parts of the chair.

  1. We connect and insert dowels.

Sidewall assembly

Your chair will have two sides to keep your little one from falling. To do this, you will need for each sidewall:

  • 2 roundings;
  • 2 legs;
  • 2 straps top and bottom.

We collect the sidewall separately each. For this you need:

  1. Connect the legs and the lower crossbar.
  2. Fasten the rounding to the top crossbar.
  3. Glue these two parts together.

Important! Before connecting two bars, the hole and dowel must be lubricated with furniture glue or PVA.

The same collection process will take place for the second part of the sidewall. All elements must be left to dry for a day. After - go over the sandpaper on this part of the chair to finally remove all the bumps.

Important! Make sure that all the corners between the bars are straight and the side parts are symmetrical.

seat manufacturing

Let's start the process:

  • Cut out 6 rectangles 300x250 mm from chipboard.
  • Round off 2 corners along the long side.
  • Sand all edges with sandpaper.
  • Glue 2 plates put under the press.
  • Fix the finished parts with a strip of metal bent along or screw with screws.

Seat assembly

We proceed to the assembly of the chair, for this you need:

  • Connect the sidewalls with transverse strips using dowels, as described above.
  • Fasten the planks to support the back and the plywood countertop using the same method.

Important! In order to make it more convenient to fold the structure, it is required to outline the installation locations for the dowels, drill holes and bait the bars without glue. Carefully review, remove all flaws. Then you can use glue for the final joining of the elements.

Table making

Myself technological process very similar to assembling a chair.

Table assembly technology:

  1. Attach the top and bottom strips to the legs.
  2. With transverse bars 340 mm long, fasten the side parts of the table.
  3. We grind the sides with fine-grained sandpaper.
  4. Tabletop fastening - it is necessary to fasten from the end of the structure.

seat manufacturing

This stage is optional, but for the comfort of your child, do not spare the material and the time spent. For this you will need:

  • foam rubber with a thickness of not more than 2 cm;
  • dense furniture fabric or colorful oilcloth;
  • construction stapler.

Let's start the process, for which you will need:

  1. Cut the foam along the contour of the seat and back.
  2. Glue to chipboard with PVA.
  3. Cut out the patterns of the back and seat, making 4-5 cm allowances for the hem on the seat, and on the back it will take so much to fit two sides.
  4. Place upholstery on the seat.
  5. Fasten on four sides with staples on the reverse side.
  6. Shoot around the circumference of the seat, while adjusting the uniform tension of the fabric.

Important! Using the same techniques, you need to fit the back of the seat with the difference that here you will also fit the wrong side, while wrapping the fabric diagonally with an envelope.

Mobile high chair

You can take this version of the chair with you to the country or to visit. We offer you a portable (mobile) version of a high chair that you can sew at home with basic sewing skills.

With the advent of a child in the house, parents account for buy a lot of new things, including children's furniture, but the prices for it are considerable, and the quality leaves much to be desired.

For a person who knows how to work with wood, it will not be difficult to make a comfortable, durable, and most importantly safe chair for feeding.

Homemade highchairs are different. This article talks about the technology of making a chair combined designs.

Material selection

Wood is suitable for the manufacture of children's furniture conifers- spruce or pine, it is soft, durable, easy to process, pleasant to look at and inexpensive.

To protect the child from injury and splinters, all parts must be handle sandpaper.

You will also need carpentry instruments, nails, hinges, varnish or paint for finishing the finished product.

In this case, it is better to take paints on acrylic basis, and varnishes are exceptionally non-toxic, because the baby will breathe them, and possibly- even try on the tooth.

Types of chairs

The child begins to eat at the common table from about 6 months but, of course, he cannot sit with the others.

For comfort were invented various designs in which you can put the baby, without fear that it will fall:

  • for feeding, which put near with an adult table, but it is inconvenient due to the height difference - the child's head is at the level of the adults' knees. The design of such a chair can be beaten with the help of small wheels for easy transportation of the chair;
  • soft case, which is attached to the back of an adult chair, is similar in design to sling;
  • Chair feeding with small table on long legs;
  • Combination chair- a small one is installed on a special stand-table; the design can be used as a high chair for feeding or a desk for games.

We make a chair for feeding with our own hands

Procurement of parts

To perform the combined design of the baby chair, we come in handy:

  • bar with section 200x400 mm on legs and crossbars;
  • Board small size thick 200-250 mm for rounded armrests. For sawing parts on a chair, you can use a wooden board -. This durable material perfectly imitates timber and can be used not only for facade cladding, but also for construction. For example, to create, covers for, in the country;
  • Fiberboard sheet 2x2.1 m(fibreboard) for the manufacture of the seat;
  • Plywood on the tabletop.

Chair details

  • Legs, length 390 mm, 4 things;
  • Cross bar, length 300 mm, 3 details;
  • rounded elements, 4 things;
  • table top 200x340, if desired, the size can be changed;
  • Top bar 220 mm, 2 details;
  • The bottom bar in 340 mm, 2 pcs.

Note! In order for the baby feeding chair to turn out beautiful and even, the dimensions of the parts must correspond to the drawing of its design.

Table details

To make a stand-table, you will need to prepare the following parts:

  • legs length 500mm, 4 things;
  • transverse slats length 340mm, 4 things;
  • Planks length 410 mm, 4 things;
  • Plywood for worktop size 380x450 mm.

It is not necessary to buy all the material, you can partially use the ones available on the farm wooden planks and cropping, fitting them to the desired size.

Making a chair: stages of work

Stage one: wood preparation

bar sawn according to given sizes. Its individual pieces are processed (polished) with sandpaper, thanks to which all irregularities and scratches are removed from the surface of the tree so that in the future the baby does not drive a splinter.

It is better to connect the bars with wooden dowels(connecting elements), you can make them yourself by cutting out sticks of size 10x20x50 or buy ready spikes in a store with furniture fittings.

Advice! If there is no time and desire to mess with dowels, it is permissible to simply connect the parts using self-tapping screws.

In the bars themselves and the board at the attachment points, you need to cut or drill holes, suitable in size for dowels (approximately deep 30-40 mm), being careful not to pierce the wood through.

Second step: assembly of the sidewalls

The future chair will have two sides, for each one will need 2 roundings, on 2 top and bottom slats and two legs. Each side is assembled apart, first the legs and the lower crossbar are connected, roundings are attached to the upper crossbar separately, after which these two elements stick together together.

Before connecting two bars, the junction and dowels are well are smeared glue, you can even use ordinary PVA. The second sidewall is assembled in the same way, then these details must be left for the day let it dry, and then sand it again.

Attention! During the assembly process, you need to ensure that the angles between the bars are straight, and the sidewalls are completely the same.

Third step: joining the seat

Chipboard cut into 6 rectangles 300x250 mm, each has two adjacent corners rounded along the long side. To secure baby, all the edges need to be carefully sand, and then glue the plates along three pieces and put them under the press for a day. The result is a solid, durable back and seat.

Finished parts fastened together with a corner or a strip of metal bent along, screwed with screws.

Fourth stage: assembling the chair

sidewalls connected by transverse strips using dowels, fixed with glue. In the same way, planks are attached to the structure to support the back and plywood countertops.

Advice! It is more convenient to first fold the structure, mark places for dowels, drill holes and bait the bars without glue - this way you can replace the flaws in time and fix them.

Learn how to make a step-ladder chair with your own hands:

Fifth stage: creating a table

Technology Assembling a table is similar to assembling a chair. First, the upper and lower planks are attached to the legs, then the resulting sidewalls are interconnected by transverse bars with a length of 340 mm.

sidewalls desirable sand with a fine emery cloth, make their surface even, smooth, safe for use.

The next step is fastening countertops. We fasten it from the end of the structure - and that's it, reliable children's table-chair ready.

Sixth stage: making a soft seat

In principle, this is not necessary, but for the comfort of the child, it is better to make the seats, and if desired, the back soft.

To do this, on a chipboard sheet you need to glue foam rubber thick in 1-2 cm and cover it with non-marking fabric or bright oilcloth children's colors.

Fabric on the back of the seat easily fastened with a construction stapler.

Advice! To save foam rubber can be replaced with several layers of synthetic winterizer

.
Manufacturing baby chair for feeding at home will take only a couple of days, and then on the basis that the work will be carried out only in free time in the evenings. So if you want, you can fast, high-quality and inexpensive to build a cute chair for your baby.

From this video You will learn how to make a baby chair for feeding yourself: