Your repost will change the Internet :)

To use the kitchen area to the maximum, you can replace the window sill with a bar counter or continue the working area in this part. In our article, we will look at real examples in photographs that will help you decide on the idea of ​​\u200b\u200brenovation for your home.

Thanks to the natural light in the working area, during the day there is no need to turn on additional light sources during cooking. Due to the window, the room is perceived as more spacious.

1. Work surface in place of the countertop-sill

The upper modules in the U-shaped kitchen are located along two walls, so there is enough storage space in this set.

Kitchen-living room in country style with a dining area. One of the most common solutions, especially for foreign interiors, is a sink by the window on a window sill.

In the event that the room is elongated, it can be adjusted, thanks to the competent arrangement of furniture. Place some of the modules along a narrow wall with a window. Thus, it will turn out to increase the useful area of ​​\u200b\u200bthe room. And along a long wall, it is better to reduce the depth of the cabinets, relative to the standard parameters (less than 60 cm).

The black countertop is in harmony with the color of the floor, against the background of the facades and the decoration of the room in contrasting white tones.

Compact kitchen in Khrushchev 6 sq. m. Washing near the window will add variety to the routine process of washing dishes. Specialists must check the angle of inclination of the pipe that discharges dirty water into the sewer to ensure the correct operation of the system.

Most often, radiators are located under the window. If you do not want to close the heating system with a headset, you should move the radiator to another place in advance, or make a warm floor, you can also choose lattice facades that contribute to the movement of air in the room and.

Provence style interior in a small square.

Pay special attention to opening the window sash. Its movement must be free, not interfere with the mixer or household appliances installed on the work surface.

Neoclassical kitchen-dining room with a work surface instead of a window sill and a U-shaped set.

U-shaped white kitchen in neoclassical style.

To avoid excessive splashing of water on the glass, the countertop window sill must be wide enough. You can also put houseplants in pots between the sink and the window. Such an obstacle will correct the situation - the splashes will remain on the flowers.

corner modern kitchen with white facades and a cornice that visually unifies the furniture composition.

U-shaped set in the style of minimalism. The wooden texture dilutes the restrained gray-white range, making the interior warmer.

In this embodiment, instead of a window sill, a work surface was made. The set is completed by a bar counter, which, due to its shape and black color, separates the kitchen from the living room space in the studio apartment.

Light range in the interior decoration of the kitchen. Instead of a window sill, they made two additional modules and installed a double sink.

Video

2. Table or bar counter instead of a window sill

The dining table was replaced with a bar counter to save usable space. small kitchen.

This solution is perfect for a family of two.

There can even be functional modules under the bar counter, the main thing is to make the correct overhang of the tabletop so that the furniture doors do not interfere with the legs.

The countertop of the bar counter is made of artificial stone.

U-shaped classic set with a dining area near the window.

Corner set with a wooden texture of the facades.

3. Wardrobe under the windowsill

Currently, a refrigerator in Khrushchev apartments is often used as an additional storage space, organizing a closet in it. If you plan to use a niche for storing pickles or vegetables, you need to insulate this structure by filling up a hole in outer wall(for example, using brickwork).

Today, redesigning the kitchen in an apartment in order to increase its functionality is a popular trend. Many hosts are looking for opportunities interesting ideas and how to make the most of it square meters usable area to conveniently arrange interior elements, furniture, appliances.

This is especially true for small apartments, where every centimeter of space is valuable. But even for spacious housing, the idea of ​​rationalization is very relevant.

One of the most successful ideas for using usable space is a window sill countertop in the kitchen, i.e. the use of free space under the window and actually at the window level. This idea seems interesting and very practical, although it will require good planning skills and sufficient financial resources to implement it.

Window sill as a countertop is a great option for small kitchens

AT ordinary apartment in the kitchen, the window sill performs an auxiliary function, in rare cases it serves to accommodate small items of household appliances, but more often - indoor plants or decor items. Under the windowsill there is a heating radiator - it is he who becomes a real stumbling block for many innovators of living space.

How to properly use the space under the windowsill depends on the artist's idea, the needs of the kitchen owners, and on the area, geometry and other features of the room.

Countertop-sill as a work area

Most often, a countertop instead of a window sill in the kitchen is planned as an extension of the working area and a continuation of the usual countertop, on which food is cut during cooking, is installed hob and the sink is installed.

For small kitchens, this solution becomes optimal way increase usable space and make work more convenient and comfortable. To do this, the window sill countertop is often made as if turning into a regular countertop by using common material for its manufacture.

The right amount of light will fall on the working area, and it will also help you to periodically be distracted from work.

But to implement this idea, a number of conditions must be met. The surface in the work area should be equal in height to the window sill, otherwise you will either have to buy new furniture, or remove the old window sill and mount a completely new tabletop base in its place.

If it is planned to place floor boxes for storing utensils, dishes and other things under the windowsill, then you will have to think about where to put the heating radiator and how to solve the problem of heating the room.

How can you use the area near the window?

When expanding the working space, a countertop with a window sill can be not just a flat cutting surface, but a full-fledged continuation of the functional part of the kitchen. If necessary, you can install a sink in it, which will allow the hostess to wash the dishes with great pleasure, admiring the view from the window. The advantage of this solution is also better natural lighting of the working area.

But in this case, you need to take care of an additional light source above the sink or cutting surface at night. After all, washing dishes in the evening or preparing dinner, closing the light of a single lamp on the ceiling with your back, is quite inconvenient.

A good solution would be to install spotlights(spots) above the window sill in window opening, or several lamps on clothespins, which can be freely moved and removed if necessary.

As for gas or electric hob, then it is extremely rarely mounted directly under the window, because. it is technically difficult and requires coordination with utilities.

Therefore, it is better to leave the stove in its original place, and use the new meters of usable area near the window for washing, cutting surface or placing dishes on it, microwave oven and other functional items.

It is better to place a place for eating away from the stove and sink.

What to do with the battery under the windowsill?

Moving plumbing units is troublesome and quite costly, so many owners agree that it is better to completely remove the battery from under the window, and install a warm floor as an alternative to traditional room heating.

This is much easier to do, especially if you have long planned to re-lay the floors in the kitchen. By removing the radiators under the window, you can freely place a narrow cabinet or cabinet in the resulting small niche, the top of which will serve as a support for the countertop.

But in some cases, a newly made countertop from a window sill does not require such serious redevelopment with affecting engineering systems. If the kitchen is spacious enough, then all functional pieces of furniture can be placed against the far (perpendicular to the window) wall, and a battery or a small heater can be left under the countertop.

Batteries can be hidden under the window sill if you make it wide enough

Manufacturing methods

There are several ways to install a countertop in place of the former window sill so that it goes into the work area. It all depends on the area of ​​\u200b\u200bthe working area, the geometry of the relative position of the window sill and furniture, and other factors.

Most often, two parts are taken to produce a common countertop flat material which are mounted on supports perpendicularly at right angles to each other. This is the most convenient and fast option extensions of the countertop under the window.

The material for the manufacture of piece-work countertops can be:

• natural stone (marble, granite);
• fake diamond;
• solid wood;
• durable chipboard with a thickness of at least 3 cm.

The latter option is the most economical, but requires a more thorough surface finish. A practical and affordable choice is velvet rubber, which can imitate various natural textures with high accuracy.

Natural and artificial stone do not require any finishing, but wood needs to be treated with waterproof varnish, because. constant contact of the countertop with moisture is expected.

An example of a solid sheet of countertops in the kitchen

For more designer interiors with a kitchen window sill flowing into the countertop, a single sheet of flat material is often used, which is cut in such a way that, after installation, the countertop looks solid - without seams.

This option is rational for a small kitchen, where the window is located close to the working area. In this case, you can make not a right angle, but a rounded or wavy one. It looks beautiful, especially if the surface of the countertop has a glossy sheen and a bright paint finish.

Use as dining area

This is a less common design decision when using space near the window. But, nevertheless, the countertop instead of the window sill in the kitchen is like an impromptu dinner table or a bar counter is a great option for rationalizing the room.

It is suitable for both small and spacious kitchens, and can act as an independent design move. If you choose the right material, color, and combination with other pieces of furniture, then the window sill countertop in the dining area will look very stylish and unusual.

Dining area near windows fit for families with a small number of people

This window sill kitchen design has several advantages over using a conventional dining table:

• saves space in the kitchen, allowing you to move freely;
• gives additional aesthetic pleasure during meals, when you can admire the view outside the window during breakfast, lunch or dinner.

The window sill in the dining area, turning into the countertop, can be made in two versions: deaf (closed) - when users sit facing the window, and open, when the countertop is perpendicular to the window sill in the form of an island element.

Depending on the wishes of the owners, any option can be used, each of which has its own advantages.

Island worktop

The first way to arrange the countertop for the dining area by the window is convenient for a small family of two or three people, and allows you to save free space to the maximum. The island tabletop, which flows into the window sill, allows you to place chairs on both sides, accommodating more guests.

The open version of the tabletop near the window can be used as an impromptu bar counter if you place a compact box under it, special shelves for storing bottles of collection wine or a mini-bar.

Conclusion

As you can see, the idea of ​​making a countertop out of a window sill in most versions turns out to be very successful, allowing not only to free up additional space for working or eating, but also to make the kitchen design more modern and stylish.

Video: an example of a window sill in the kitchen

Photo examples

The kitchen window sill can be used in different ways: arrange a small winter garden or vegetable garden on it, a small cozy corner with soft coating where you can sit, leave an empty space so that you can use it as needed (put a vase with a bouquet, set up a Christmas tree, and so on), arrange it as a decorative interior detail (place textile dolls, ceramics, etc.). But you can install a countertop and turn the window sill into a work surface or dining table.

Countertop on the windowsill, design

There is an opinion that this option is forced, as a rule, because of the small size of the kitchen. It's not like that at all. A window sill can be mounted for several reasons:

• if the hostess needs the kitchen work surface to be well lit and always natural light;
• in a spacious kitchen, when the window sill is combined with the island or is it for the purpose;
• to visually balance the kitchen space and prevent the placement of all furniture in one direction;
• when achieving certain goals in the design of the kitchen, when all the furniture is located in a circle;
• in a small kitchen where there is no room for a full dining table and work surface.

Usually, the countertop is mounted if the window opening is deep enough, at least 40 cm.

Then, by adding a small protruding part, you can get a full-fledged table, which will have the following design:

• can stand on legs;
• take shape;
• fit on a pedestal;
• fasten to brackets;
• represent one surface with all kitchen furniture;
• it can be mounted;
• have one surface with a bar counter;
• be perpendicular to the window or go parallel to it;
• be any, even the most bizarre form.

Advantages and disadvantages of installing such a continuation of the table

The main advantage of the countertop built into the window sill is that in this case the kitchen will not seem like a closed space. There is more room for design solutions: the window sill blends seamlessly into the worktop and fits perfectly into many interior styles, from classic to ultra-modern. Yes, and the hostess gets the opportunity when cooking not to rest her gaze on the wall, but to look at the landscape outside the window. This arrangement of the working surface makes it possible not to turn on electric lighting during the daytime.

Cons is what to dismantle if necessary stone surface countertops are not so simple, such a table cannot be moved to another place. Curtains on the windows are better to choose from water-repellent material.

How to install: properly embed and secure with your own hands

Countertops made of different materials are installed in different ways.

Large tiles visually reduce the size of the countertop-sill.

Installing a countertop decorated with ceramic tiles or porcelain stoneware:

• first you need to consider what dimensions of the countertop are needed: the countertop should be deep enough, but not excessively, otherwise it will be inconvenient to get objects at the window itself if necessary, wipe the table and open the sashes;
• it is necessary to make the basis for the countertop: it can rest on the cabinets or on the legs; if there is no skill in making furniture, it is better to order cabinets in the workshop;
• install the cabinets, aligning them with the window sill and vertically;
• then make the base for the countertop: it can be a piece moisture resistant plywood sufficient thickness; the base of the corresponding shape is cut out according to the drawing of the countertop;
• if there are batteries under the windowsill, then cuts are made in the workpiece;
• the finished tabletop must be fixed on the windowsill;
• further create or porcelain stoneware; tile adhesive is taken thicker than for wall cladding;
• the glue is evenly distributed over the surface of the base, for this you can use a regular grater, then the tiles are laid so that the gaps remain minimal;
• a grill is installed on the hole above the radiator;
• the tiles are cleaned, the seams are rubbed;
• a ceramic corner or molding is installed on the ends of the tabletop;
• ceramic or glued to walls and window openings.

Stone countertop is durable and strong

Stone countertop installation:

• the plate is ordered according to the finished drawing;
• the wider the support, the better; it must be installed in such a way that the countertop fits snugly against it;
• if necessary, the stone can be filed and sharpened with a diamond tool;
• dimensions are measured so that the joints of the plates are the least noticeable; during installation, they are filled with a sealer, for this the edges of both plates are smeared with a sealer mixed with a hardener in proportions of 1: 2, the plates move quickly, because such a composition hardens within two minutes; after hardening, the seam is polished so that it becomes practically invisible;
• cabinets that will serve as a support are leveled and fixed using clamps and screws, installed;
• cement is applied to the window sill, the countertop is laid in it, it is checked how tightly it lay on both the window sill and the cabinets.

Grout is not as resistant to temperature and mechanical stress as tile.

Countertop window sill in the room watch the video with ideas:

Pitfalls that will have to be faced if combined in the kitchen

There are a few things to keep in mind when installing countertops.

The tabletop is attached under the window frame. Condensation that forms on the window can flow down, and the end attached to the window sill will constantly get wet. The countertop must be made of a waterproof material, such as glass or stone, or the outer end must be waterproofed. On the plastic windows you can install an additional ventilation valve, companies involved in the installation of double-glazed windows have this option.

When the countertop is installed, it will become much more difficult to open the window. Therefore, the window sashes are fixed in the “ventilation” position so as not to remove the dishes from the table every time when you need to open the frame.

The window sill may not have the desired height: be higher or lower. The problem is easier to solve if the window sill is higher: then you can combine it with a bar counter by placing chairs of the desired height to it. If the window sill is low, a multi-level table can be built on its base.

Convection

To ensure flow from the radiator, it is necessary to make a hole in the countertop

Almost always installed under the windowsill heating appliances. In order for warm air to circulate freely, large enough holes are made in the countertop. The easiest way to do this is in countertops made of any stone and wood. Alternatively, you can close the opening.

If possible, the battery should be moved to another location.

The holes in the countertop for air exchange must be at least 10 cm in diameter.

Sustainability

The most stable construction rests on furniture cabinets. The stability of the structure is also necessary for safe washing of the window when you have to get up on the countertop, so the calculation should be based on the average weight of a person. If the tabletop rests on legs, then it is better to provide for an additional one.

Splash protection

Splashes cannot be avoided when using the countertop as a work surface during cooking. To protect the window from splashes, curtains made of water-repellent material or special structures made of plastic like blinds are used, which move in if there is work to be done in which the window can be splashed.

Heat resistance

Countertops made from any type of stone, concrete, ceramic and porcelain stoneware can withstand temperatures up to 150 degrees and leave no marks on them. Heat-resistant also withstands high temperatures. The most defenseless against high temperatures are wood countertops. Even covered with special varnishes, they still remain susceptible to high temperatures, this must be taken into account when operating such countertops and using various supports.

Materials for manufacturing may be different, but for high temperatures only metal ones are used.

How to choose the surface material: artificial, wood, chipboard, tile

The same requirements apply to the countertop on the windowsill as to the usual one:

• it must not emit hazardous substances;
• must be moisture resistant;
• dirt should not penetrate into the pores;
• be resistant to all kinds of damage;
• be heat resistant
• easy to wash.

You can also combine materials based on work areas to create a new aesthetic and maximize the benefits of each countertop material.

There are several types of materials from which such a countertop can be made:

• PVC: it's not the best best material in this case, but it can be used if the countertop is not intended for cooking, but is used only as a dining table or a small bar counter;
• Chipboard and MDF: such plates are used only laminated, or they are taken as the basis for stainless steel countertops and tiles;
• (Corian): it is a lightweight, convenient material that allows you to cut a countertop of any configuration;
• marble: such material looks good, is hygienic, but it has a lot of weight, so it is often necessary to limit the size of such a countertop;

Repair, restoration, maintenance of the countertop passing into the window

• if there is a docking seam on the countertop, it must be rubbed regularly so that microorganisms do not settle on it;
• it is enough to wipe a smooth surface with a damp cloth, and embossed and textured surfaces need to be cleaned with a brush;
• Can be used for heavily soiled detergents, having previously tested them on an inconspicuous part of the countertop.

Restoration and repair:

• when restoring a wooden tabletop, it is covered with liquid plastic, thus not only removing chips and scratches, but also increasing water resistance;
• minor scratches and stains on an artificial stone countertop can be eliminated using polyester liquids;
• if the integrity of the countertop is broken, then it can be restored by covering the crack with polyester resin and then sanding after the resin has completely hardened.

How to install the window sill yourself, video instruction:

Table top-sill interesting option embed and save space, for many styles in the interior: this is both minimalism and Scandinavian style, and chalet style. This countertop looks great in a small white kitchen. in Khrushchev, where there are few squares.

The main disadvantage of small apartments is the lack of sufficient space, so here it is necessary to select best options distribution of free space. To one of these practical and relevant solutions refers to the window sill countertop, which is a continuation of the usual window sill panel. This option can be implemented in a large and small room, nursery, in the kitchen. There are a lot of design solutions, but which one to choose will depend on the specific interior, the area and configuration of the room, the thickness of the main wall, and the personal preferences of the owner of the apartment or house.

When a countertop from a window sill is relevant

The decision to make a countertop combined with a window sill is suitable in the following cases:

• When the window opening has big sizes in depth - at least 40 cm. This option is the simplest and most inexpensive, since the protruding part of the board is not necessarily equipped with a support, but with an increase in width to 60 cm or more, it can go into the surface of a cabinet or table.
• Insufficient amount of natural light entering the room or kitchen, then a countertop is created specially at the window, smoothly turning into the window sill.
• When you need to combine several pieces of furniture in order to preserve the style of the interior. This option is suitable if kitchen furniture, a children's or bedroom set is located along a larger wall with a window and a gap in the elements of the headset will break the single design line.

Countertop combined with a window sill increases the working space

The undeniable advantage of this option is that harmony is maintained between the furniture present and additional elements, in particular a countertop combined with a window sill. In addition to increasing the working surface and improving aesthetic performance, increased convenience and comfort are created.

Materials for manufacturing

Most original solution- this is the installation of a universal countertop on the windowsill, which performs two functions. To create it, you can use different materials, therefore, this issue should always be approached seriously, because it depends on how comfortable and durable the surface will be. It is also necessary to take into account in which room it is planned to install a new combined panel or replace an old window sill with a countertop.

The market offers a large number of materials that are suitable for the manufacture of window sill boards in the form of countertops. It could be:

• Natural or artificial stone;
• Different types of wood;
• chipboard and MDF;
• Plastic, including acrylic coated.

Each of the above materials has its own advantages and disadvantages. When choosing, one should take into account what loads the window sill countertop will withstand, and what factors will affect it: mechanical impact, high humidity, the presence of fat accumulations in the air.

Natural stone is the most reliable and durable, therefore it is suitable for a window sill in the kitchen..

The most durable window sills are made from natural stone

The main advantages of the material are:

• resistance to mechanical and chemical influences;
• high levels of aesthetics;
• resistance to fading even when exposed to direct sunlight;
• high thermal stability;
• durability.

Among the disadvantages: heavy weight, high price, difficulty in processing.

alternative natural stone is an artificial analogue, for the manufacture of which special materials are used. With an artificial stone countertop, you can not be afraid of applying all sorts of mechanical damage, liquid spilled on the surface (tea, coffee, wine), you can put hot dishes. Despite the high price compared to other materials, there is the possibility of choosing a more affordable option.

Surfaces made of artificial stone are not afraid of mechanical influences

Wood is practically not used in the kitchen, but can be used under a window sill in a room or on a balcony.. The disadvantages are: exposure to moisture, mechanical stress, the need for special care.

Wooden window sill countertop is most often installed in a room or on a balcony

A budget option- Chipboard or MDF, which can be used to create countertops in the kitchen and in the room. Despite the presence of some disadvantages (lack of heat resistance, susceptibility to mechanical stress), there are also advantages:

• moisture resistance;
• simple care;
• aesthetics;
• a large selection of colors;
• affordable price.

by the most available material for window sill countertop is plastic

The design of the kitchen, room, balcony fits well with a plastic worktop combined with a window sill. This is a material that is resistant to moisture and thermal effects, which is the most affordable at a cost. Plastic is presented in a wide variety of textures, acrylic counterparts especially benefit in design.

How to mount with your own hands

In order to cope with the task and make a suitable type of countertop with your own hands, you need to stock up on tools and buy the appropriate material. But for starters, it is advisable to make a drawing of the future window sill, turning into a countertop, and measure all the details.

The accuracy of the calculations is very important, since the future table must correspond to the area of ​​\u200b\u200bthe room and fulfill its functions.

There are several mounting methods:

• adjoining to an existing board;
• creating a solid slab that is cut to the desired size.

In the first variant, it is necessary to ensure a snug fit between the two canvases. If the material is a stone, then the joining edges are smeared with a sealer with a hardener (1: 2), after which the two parts are quickly moved and the joint is polished. Table tops serve as support.

A panel made of other materials will look more aesthetically pleasing as a solid sheet, which is cut to size and looks monolithic.

Almost under every window there is a heating radiator and if it is impossible to move it to another place, then when installing a window sill-countertop, this moment must be taken into account and special holes must be created.

How to replace an ordinary window sill in the kitchen with a countertop

A window sill is installed in the kitchen after the old panel is dismantled. This is one of the best solutions in a small kitchen, since the element does not take up free space, you can build a transforming structure when top part The table is folding and folds when not needed.

A countertop instead of a window sill in the kitchen solves the problem of maintaining design kitchen set, which, when separated, loses its attractiveness. And since the small kitchen does not allow it to be installed elsewhere, this is one of the best options. It is necessary to select the material and color for the interior of the kitchen and only then proceed to work. Possible for a short time in the kitchen with your own hands, turn the window sill into a work surface or dining table.

Installation in the nursery and in the rooms

An equally functional solution is a window sill countertop in the room. Such a model is a continuation of the window and can be used as a place for a child to study. The continuation of the window sill in the nursery allows you to use the surface for various purposes, for example, to store toys, and schoolchildren can place educational supplies, books, CDs.

In the children's window sill, the tabletop can simultaneously serve as a study table

This is also the only solution for a small room, because a variety of items or a shelf in the form of a small whatnot can be easily placed on an additional platform. For the realization of these goals, a wooden table top, which goes well with a desk, is quite suitable. The part can be adjacent to the window sill or a kind of step is made when the window sill is lower or higher than the level of the countertop. The transition element must be fastened at the junction with the window sill.

Table-top-sill on the balcony

Replacing the window sill on the balcony is associated with the installation of a window structure and this is the best moment when you can completely change the interior and apply a modern approach. For example, if the additional area is originally planned to be used as an office, then you can install a countertop that will be a continuation of the bedside table or desk. Corner models look very original, where docking is carried out not along the length of the balcony, but from the end. For creating interesting solution you can lower or raise the window sill.

Window sill countertop on the balcony is used as an original design solution

When choosing a material, one must proceed from the characteristics of a given room. In terms of performance, plastic is best suited, including those with an acrylic coating, as well as artificial stone.. The use of a wooden analogue made of beech, oak, ash, cherry is not excluded. Such a table-top window sill fits well into the interior if there is no window and a door to the balcony, and it was installed instead of a window sill in the room. In this case, it should be in harmony with the design solution of the room and the balcony.

If you have questions about how to make a tabletop out of a window sill, and how to replace a window sill, you should not spoil the material and waste time - it is better to entrust the installation on the balcony, in the room or in the kitchen to specialists.

KITCHEN TABLE INSTEAD OF WINDOW SILL

Kitchen design is an interesting and exciting activity. Especially when it comes to the layout and arrangement of furniture structures. One of the main features of a small kitchen is compactness and functionality. That is why you can make a nice table out of the windowsill, which will replace the overweight kitchen table.

For these purposes, when repairing and finishing work, be sure to order a countertop that will cover the window sill area and work area tables. In addition, such a solution will look harmonious. Space in the kitchen is saved, the kitchen looks more spacious.

So, let's see what solutions designers offer us! A window sill, smoothly turning into a table, can completely replace the dining area! For me, for example, this option is more than suitable. Since we have lunch and dinner in the room, the table in the kitchen is suitable for morning coffee or lunch. And you think what is more convenient for you. Good idea- make the window sill from the countertop a little wider than usual. The result is a complete table!

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

Window sill and its variations - countertop, bar counter, table

In a room of any size, a rational layout is important, but in a small kitchen it is especially important. After all, it is impossible to clutter up the space, and if you consider that in the kitchen you need to place appliances, a cooking area and a dining group, it becomes clear why sometimes you have to fight literally for every centimeter.

One of the most winning decisions is to place a countertop instead of a window sill. After all, often the window sill (especially if it is initially wide) takes up a lot of space, while not being used functionally. Agree, it is irrational to arrange an exhibition of plants near the window, and then huddle in the remaining area, if you can immediately competently approach the organization of space.

And the window sill-countertop in the kitchen can become a full-fledged dining table or an excellent analogue of a bar counter.

Cons of a window sill converted into a table:

• All work must be done at the repair stage, even before slopes are leveled, plastered and finished;
• If access is not provided warm air from the battery to the window, then in winter the window will fog up, and high humidity will most likely provoke the appearance of mold that is harmful to health, which will then be difficult to get rid of.

Table top-sill

Near the window, you can organize a full-fledged working area. If the only correct solution for the available space is the location of the kitchen set against the wall with the window, then the window sill and countertop are combined. How designer Maria Dadiani did it. Please note that the window sills in this apartment in Khrushchev were originally lower than the level of the headset cabinets. In order to connect them, it was necessary to build up the base of the window sill. The heat here comes not only from a hidden battery, but also from an insulated wall.

Such a combination is also necessary if the kitchen furniture is located along 2 or 3 kitchen walls. Then replacing the window sill with a countertop allows you not to break the whole line of the headset and again creates an additional working or dining area.

The work of master Alexander Osyk. A single countertop united the window sill with a bar counter and headset cabinets.

Here is another connection example. floor cabinets with window sill. Here, the window was not built up, but bars were simply placed on the base, and guides for drawers were attached to the bars.

And here the master did not have to adjust the height of the window sill, in addition, he installed a cabinet under it, and covered the battery with a screen.

In order for the heat from the battery to pass better, the pedestal that closes it should be with lattice facades. As shown in the photo below.

If you don’t want to build up and raise the level of the window sill or the repair has already been done, then you can join the two countertops of the window sill as follows.

But what if the window sill, on the contrary, is higher than the level of the pedestals? Of course, it is best in this case to order a kitchen of a suitable height. Another option is to lower the window sill, raise the tabletop or adjust the legs (if they are adjustable). Or you can put up with it and act like the hostess of the next kitchen - close the joint of the countertops with a corner.

On the base of the window sill, you can install a tabletop of such a width that you get a small table or bar counter, depending on the height.

You can make such a small table. For a small kitchen, this is the best solution. The battery is covered with a screen, and the underframe is made of drywall.

And here are examples of a window sill - a bar counter from warmer countries. Note that there is no heating battery under the window and it is not difficult to install such a bar counter. And you don’t need to sit comfortably and think about how to close the battery. We will have to show more ingenuity and resourcefulness in this matter. However, some ideas can be gleaned.

Do-it-yourself window sill with folding table

The window sill in the kitchen can even be folded - this is a great solution when you don’t want to do repairs in the kitchen and you don’t need to connect the window sill to the headset worktop. Such countertops rest on two supports from below and can be easily folded if necessary so as not to interfere with the person preparing food. A folding table combined with a window sill is an ergonomic and effective solution, allowing you to use the previously unused area under the window.

You can buy it, for example, in Ikea, where models are sold: Norberg, Bjursta and Norbu. Here's how they look inside.

Such a simple design can be done with your own hands. To make such a table you will need: a piece of plywood, a jigsaw, self-tapping screws, a primer, paint, a brush / spray gun, a level, a screwdriver, a puncher, a hacksaw, as well as furniture card loops 2 pcs. and piano loops 1 pc.

Here is a photo guide:

If the window sill is located below or above the limits of a reasonable level of placement of the countertop, then it would be more reasonable not to even consider such a kitchen design. Optimal Height for the working area is 83-93 centimeters.

Another important point to be taken into account. Window sashes after the installation of a new design should open freely.

The tabletop should go at least a little under the frame. Its edge sawn off from the side of the window and the joints are treated with sealants or protective compounds that prevent moisture from getting inside. This rule does not apply only to artificial stone.

An interesting design of the window sill is its design in the form of a bench. This option is perfect for spacious kitchens with low windows. Here it is necessary to consider how far from the floor the window sill is located. It must match medium height stools, which is within 45 centimeters.

For the device of the bench, wood is chosen, and the depth of the seat is made at least 30 and no more than 45 centimeters. For security reasons, it is recommended to install a low protective grill on the window, the design of which will correspond to the general style. A dining table is set near the bench or left open.

There are a lot of design options for the window sill area and each of them can become exclusive.