Homemade ramp for a children's slide. We make a children's slide for the joy of the baby. Mounting the top platform

29.04.2020

Slides, like swings, are one of the most popular entertainment for children on fresh air. Any playground is equipped with a slide.

Recently, some parents are afraid to send their children to the playground themselves, especially during rush hour. By itself, the slide is almost not dangerous and is equipped with a number of protective equipment. But the public slide itself carries a danger in the form of other children.

Imagine what will happen if several children climb a sufficiently high hill and decide to fly off the hill with a caterpillar? Often such experiments end in failure. Therefore, now some parents, at every opportunity, limit their children from such dangers and build similar slides in their yard, in the garden, and even in the garden.

The matter remains small - to design and build such a slide.

Types of slides for children and the age of the child

For starters, you need to decide on view of the slide. There are a huge number of them: small, medium, very large, plastic, metal, double, with a whole range of additional features.

Often found in playgrounds slides of metal. This design is easy to mass-produce and durable. Convenient when used by a large number of children.

But regarding security such a slide has a number of disadvantages:

The height and acute angle of inclination of the slope make metal slide dangerous for use by very young children.
In the sun, a metal slope can heat up to very high temperatures.

In a relationship perfect combination slide size, relative safety and convenience the best option counts wooden slide. It can be both standard and with various additions to its design.

There are double-sided slides with space for a rope and rope ladders. Such slides attract the attention of children much more.

And in hot summer time children will love to play inflatable slide. The slope of such a slide ends directly in a pool of water. Children from three years of age can use this slide under the supervision of adults. The pool is not recommended to fill deep, especially if your child cannot swim.

What material to choose?

For the smallest children, slides are made from plastic. This design is a low ladder (usually not higher than a meter) and a plastic slope, which has the lowest possible angle of inclination for safe use children.

But to make such a slide on your own is impractical. Better buy finished product, given that the market can be found as the most budget options, and more expensive.

The best material for self-manufacturing roller coaster is wood. Wood is flexible in terms of creating a wide variety of structures, not expensive and ecological.

Creating a metal frame for a slide is a difficult task. Additional equipment, materials, skills are required. Therefore, those parents who want to pamper their children opt for a tree.

Some masters successfully combine a slide from wooden base and a metal or plastic ramp of a suitable size.

It can be purchased at a hardware store, or ordered from a factory.

Do we make a slide out of wood?

Consider a wooden model slides for children 3-8 years old with a metal ramp.

We will need:

12 bars for the base;
several boards for flooring the top of the slide;
flat board for the ramp pallet;
metal or plastic slope;
2 boards for the railing of the slope;
boards for stairs;
nails;
plywood.

First you need to build base for slide. The design of our base will be the simplest, but at the same time quite stable. It will be a rectangle one and a half meters high and a meter wide. To build such a rectangle, we need 4 one and a half meter beams and 8 meters.
We will find a free place in the garden or on any other site where we plan to install a slide. Let's start base assembly. From four meter bars, assemble a square, firmly hammer it together with nails.
Now take one and a half meter bars and fix them perpendicular to the resulting square at the corners. Complete the base using the last four pieces for the roof of the rectangle. Base top board for extra stability and security.
Cut the appropriate size squares of plywood and nail them to the sides and top of the base. If desired, the resulting walls can be painted.
The next step is attaching the slope to the base. First, set the ramp railing at an appropriate angle so that the child does not fly to the ground during the game. The resulting bumpers must be at least 15 centimeters. Under the railing, attach the base - a flat board.
Now install directly by yourself slope. The fixing process is very simple. With a special stapler for metal, attach the ramp to wooden pallet, pressing it firmly and spreading it evenly.
Then you can start building stairs. Decide on the height of the child who will use this slide. Based on this, you can determine the most suitable distance between the steps of the stairs and the height of the railing.
Choose a convenient stair angle. The smaller the angle of inclination, the easier it will be for the child to climb the hill.

The last part of the construction of the children's slide is installing railings on stairs and top. They should be high enough so that the child feels safe and does not panic at the top of the slide. The wood intended for the railing must first be sanded so that there are no knots and hitches.

Drawing of a simple wooden slide

When building, keep in mind that it is better to make a slide “for growth” so that it lasts a long time.

On video detailed wizard Class:

Do not doubt the decision to build a slide. This is quite a feasible task for most parents. Such a slide can be many times safer for your child. You will take into account all the nuances, combine security aspects and find a compromise that allows you not to worry about how your child spends his leisure time in the future.

The arrangement of the playground is impossible without a slide. But you need to choose the design very carefully and take into account all the nuances. This is safety, comfort, and ease of manufacture with your own hands.

Kinds

Speaking about the types of children's slides, we must first distinguish two types: garden and located in the house. Most often, home designs are placed in the bedroom. They can be made from arbitrarily chosen materials, even plywood or particle boards. On the street, this is unacceptable - the adverse meteorological effects are too strong there. But the basic approaches to the design of the design remain unchanged.

The difference may be due to the materials from which the slide is made. For her apply:

wood;
metal.

ease of assembly;
minimum occupied territory;
the possibility of obtaining a variety of forms;
convenience and safety;
seasonal versatility.

Plastic allows you to make slopes in the form of a spiral, pipe or wave. The excellent heat capacity of the plastic slope allows it not to overheat in the summer, and also to keep comfortable temperature in winter. The work is very simple, you just need to assemble the parts in accordance with the instructions. However, plastic is fragile, especially when it comes to cheap Chinese samples. She doesn't last long enough.

Often on the site near apartment buildings you can see slides made of metal. They are very durable and last a long time. Even with active use, the attraction will work long enough to be used by several generations. You can make a design with different heights and with an unequal length of descent.

However, before choosing such a structure for your yard, you must take into account its weaknesses.

Metal conducts heat very well. In the heat, it gets very hot, and when the cold sets in, the skiers freeze easily. This can lead to bad health consequences, even if they are not noticed in the heat of the game. You also need to remember that metal requires maintenance. And if the slope is made of steel, it may corrode.

Wood is attractive for many reasons. It is safe in ecological and sanitary terms. wooden structures relatively light and can be placed anywhere. Weather conditions do not prevent their use. But you have to understand that even the best wood can be deformed by dampness and temperature changes.

For protection, special treatment is carried out. However, it complicates and increases the cost of the construction process. In addition, it is necessary to carefully select the compositions for impregnation, since not all of them are safe enough. But a wooden slide can be easily repaired with your own hands. And at the construction stage you will not need to use welding machine.

The large area occupied by the slide (especially along with the descent) requires a more thoughtful approach to the organization of this element of the playground. Limit yourself to choice suitable material it is forbidden. Often the hill is complemented by a house. Not only does it become another place to play, but it also provides shelter from the rain during the summer months. It is also worth mentioning that the types of slides differ both in the presence of a house and in the size of the structure.

Drawings and dimensions

To properly build a slide for children on suburban area, it is necessary to draw up drawings and diagrams. If the slope profile found on the Internet does not suit the slope, you need to turn it clockwise (to increase) or counterclockwise (to reduce) the angle. The steeper the slope, the more pleasant it will be for children. In addition, this design will take up less space, which is especially important in the country.

But when the slope of the slide is more than 40 degrees, it is necessary to carefully calculate so that the braking section does not turn out to be excessively long.

Usually profiles are drawn on a single scale, from bottom to top. At the same time, they try to ensure that the distances between the starting points coincide. After that, vertical secant lines are prepared, between which there should also be an identical distance. The angle of the slope is determined by how large the free space is.

If there is a wall, a pool or other dangerous places in the courtyard of the house near the descent, it is necessary to plan the construction of the steepest slide.

When drawing up drawings, it is required to take into account not only the available territory, but also the age of the children. So, if the design is designed for the category of 3-7 years, you can make a playing surface at a height of over 2 m. But at the same time, you will have to make metal barriers, the height of which will be at least 0.7 m. If children of any age can use the slide, fence openings may be a maximum of 0.5 m. In this case, the height of free fall must be limited to 2 m.

When a fall from an upper landing is likely, it is necessary to provide for the laying out of an impact-absorbing coating during the design. The drawings often do not indicate supporting structures. And also there may be no other elements of deepening. The form should be as simple as possible, since it is difficult to build a structure that is sophisticated in configuration. The drawing of the slide for the street should be made with such an orientation that the descent is not directed towards the carriageway.

Design

At an early age, children's imagination itself does the main work. It is able to “colorize” a seemingly unremarkable element on the site, to present it as a fabulous space. But the intention of some adults to help the imagination, to push it in a strictly defined direction, is quite appropriate. And if it is difficult to diversify the slope, then the rise can be presented much more interesting than simple staircase. Great solutions of this kind can be:

slide in the form of a "tractor";
a house on a tree;
"locomotive".

How to do it yourself?

On the Internet, it is easy to find many schemes for arranging a children's slide. But one should seriously pay attention only to such drawings and drawings, where the barriers are shown in detail. Children of any age play selflessly and lose their sense of reality. Therefore, fences and railings must be mandatory. Special attention should be paid to the materials from which the slide is constructed as a whole and even its minor parts.

There are two main requirements: sanitary safety and minimal risk of fire. All wood and metal structures must be sanded to minimize the risk of injury. Thinking over the future structure and erecting it, it is necessary to exclude any slotted partitions and gaps. When playing, children do not follow where they stick their fingers and even their heads. It is useful to imagine the slide through the eyes of a child, and then it will become clear where the dangers may be hiding.

Step by step design sports equipment begins with the preparation of the descent. It is made from boards that match in length and width. The wood is carefully sanded to ensure safe descent. To connect the boards, bars are used, placed from below. The next step is to attach the side parts of the structure to the descent.

In order not to scrupulously calculate all the proportions, you can simply repeat the standard dimensions of the factory slides. It is 1.3 m in height at a slope of 55 degrees. The boards of the side parts are selected and placed so that the ends are in the upper part of the site. They act as handrails that you can hold on to before descending. The sidewalls are fixed on both sides with self-tapping screws so that they hold on to the base of the descent.

Important: the side parts should be thoroughly processed. All sharp corners are cut and even sanded with sandpaper. To spend less time and effort, you can simply take a grinder with a grinding disc. Next, you need to do the markup. At this point, you will need a drill for gardening.

The excavations in the ground obtained with its help are needed to install the timber. For your information: from below this beam must be smeared with mastic. Now the places where it was placed are being concreted. Only such a solution ensures the reliability and stability of the structure. It is recommended to mix the mortar with M500 cement in standard proportions.

In the upper part of the bars, grooves are cut with a saw. They are needed to put the strapping straps. The parts are connected with self-tapping screws. Planks solve 2 tasks at once: they increase rigidity and ensure the safety of children. Now you need to attach a pair of wooden crossbars to the frame.

A ladder is attached to them on one side and a prepared descent on the other. When this work is done, it is necessary to build a wooden floor. In its manufacture, boards are laid, attaching them with self-tapping screws.

Important: boards can not be placed close to each other. The gaps should be such that there is no danger of injury, but water leaves freely.

If you need maximum strength, joints wooden parts reinforced with steel corners. It is recommended to make the slide twice as long as it is high. When choosing a site, you need to look so that it does not end up in a lowland. When prolonged rains come, a "swamp" is formed there. All wooden and plastic parts are supposed to be impregnated with flame retardants.

But the construction of a wooden slide can take place in another way. Alternative scheme implies that they first remove all the soil and level the excavation. This is necessary if there is fertile land - then it will not be empty and will benefit somewhere else. Next, the site is covered with sand and after a while, when it settles, the entire territory is rammed. This time is not worth wasting, you can:

prepare a tree;
dry it;
sawing according to the drawing;
sand;
impregnate with protective components.

Steps, handrails, railings and boards that will be needed for the construction of the "tunnel" are painted twice with enamel. In the interval between staining, they need to be sanded. On this preparatory stage ends. It's time to build the foundation: they put reinforcement in the holes prepared using a garden drill. It will certainly be verified according to the building level.

When the reinforcement is placed, it is immediately concreted, and the corners are welded on top. The pillars that will be placed at the base must be cut in certain places. These recesses will allow you to fix the beam on the corners with self-tapping screws. Further, the pillars are connected to each other with the help of jibs. The ladder is made like this: stringers are attached, and then steps are stuffed over them.

But the ladder cannot be used normally if it is not supplemented by a launch pad. When this work is completed, it is required to prepare the base of the descent (it is made of timber). A steel curved profile for the ramp is installed. A plywood shield is placed on top of the base under the slope. A sheet of iron is nailed to this shield.

The outer edges of the sheet are folded and fixed to the profile. Otherwise, injury is inevitable. Now you can cut the gaps in the boards and wrap the edges of the sheet there. A boardwalk is being prepared under the slope. The sides are sheathed with plywood. Now you can:

put boards;
complement the stairs with railings;
build hipped roof, cover it from above with plywood.

sheet of plastic;
linoleum;
galvanized steel 0.05 cm thick.

Laminate for slopes is not advisable to use. Under constant load or simply in contact with water, it is easily deformed. And here are some more recommendations:

you can increase the protection of wood from moisture by polishing with wax;
to cover a wooden slide Oil paint much worse than acrylic compounds and varnish;
you can not put a slide near poisonous plants and honey plants;
you must immediately look so that there are no pipes and electrical appliances nearby;
you can not orient the slope towards the roadway, fence or main wall.

Beautiful examples

You can list the rules for building slides and study the nuances for a long time. But it is much better to take the initiative and focus on ready-made design ideas. The photo below shows a simple light-colored slide built almost entirely of wood. Only the surface of the slope is lined with sheet iron. At the same time, the protective sides are completely wooden. Contrary to the fears of some people, this decision does not look dull at all.

Children's mini playgrounds are usually arranged in the yards of even small ones. country houses. Their obligatory attributes and slide. Of course, you can buy a ready-made version of such designs in the store. But it is much more interesting to make them yourself, right in your garden. Yes, and it will take much less money to equip the site. In this article, we will talk about how to make a children's slide with your own hands.

Requirements for a children's slide

Of course, a wooden slide with your own hands should turn out to be safe. To achieve this, the following requirements must be met when drawing up a project:

The finished structure should not have sharp corners and protrusions that could injure a child.
The upper platform, stairs and descent are necessarily fenced with railings.
Do not use flammable materials in the manufacture of slides.
When choosing the angle of inclination of the descent and the height of the slide, you need to take into account the age of the child. Most often, such structures are collected for children 5-9 years old. In this case optimal height will be 1.5 meters (to the top platform). The slope of the descent for such slides is usually 55 degrees.
And, of course, the structure must be assembled from environmentally friendly materials. Most often, do-it-yourself slides are made of wood. To assemble a slide from metal, a welding machine is required. And it is not available in every household.

Drawings and diagrams

In one of the drawings above - children's house with a hill.

What materials are needed for a children's slide for a summer residence

To mount the slide, you will need a 100x100 mm beam, a 200x30 mm edged board, a long piece of galvanized sheet, bitumen and crushed stone. All lumber must first be sanded with a grinder and impregnated with anti-rotten and refractory-enhancing compounds. From the tools you will need to prepare a grinder with a grinding nozzle, a garden drill, a screwdriver or a hammer. Elements can be fastened with nails or self-tapping screws. You will also need galvanized corners. A do-it-yourself children's slide should be, first of all, safe, so you only need to choose quality materials. Below you can see step by step photo with instructions.

Previously, downhill, markings are made on the ground. Assembly begins with the installation of supports. They are made from thick timber. Holes at least 70 cm deep are drilled in the ground with a garden drill. A little crushed stone is poured onto their bottom and tamped down. The ends of the bars are coated bituminous mastic, drying oil or and set strictly vertically. Backfill is made with crushed stone.

Jpg" alt="(!LANG:Setting supports" width="300" height="225" srcset="" data-srcset="https://remontcap.ru/wp-content/uploads/2015/04/09304755-300x225..jpg 1024w, https://remontcap.ru/wp-content/uploads/2015/04/09304755.jpg 1500w" sizes="(max-width: 300px) 100vw, 300px">!}

Attached to the racks bottom harness(at a height of about 40-50 cm from the ground). Next, support bars are stuffed under the platform. If it is supposed to make a canopy over the slide, the upper harness is attached. The handrail of the platform is fixed on the corners.

The descent is assembled like this:

With the help of bars (across, from the bottom side) 3 boards are connected.
Smooth tin is stuffed from above. It must be fastened in such a way that the edges do not subsequently move away, and the children could not get hurt. It is best to bring them to the ends of the boards.
On both sides of the finished descent, the sides are attached. It is better to fix them not on nails, but on self-tapping screws. ends at the required angle.

Ladder assembly

The steps of the slide must be safe. Their optimal height is 12-15 cm. The angle of inclination of the stairs may be slightly smaller than that of the descent. The easiest way is to fix the steps on the bowstrings. To do this, two boards are fixed to the racks at the level of the upper platform. Further, from the inside, support bars under the steps are stuffed on them. Then the treads themselves are attached. It is not necessary to install risers.

The final stage

The last step should be to attach the descent to the support posts at the level of the site. In this case, it is also better to use self-tapping screws. Next, the floor of the site is sheathed and a canopy is installed. The latter is most often made double-sided. In this case, two racks are attached to the upper harness. A horse is fixed on them. Four rafters are fixed (two on each side) and plywood is sewn on. The platform railings are covered with a board. Further, the entire structure needs

In the yard country house or at personal plot giving the best entertainment for children will be playground with a hill. You can make a children's slide with your own hands. The main thing is to know what materials, tools will be needed, to draw up a competent project plan. After all, there are many combinations: with a steep and sloping descent, with carved decorations, additional play areas, etc. This entertainment will appeal to children aged two to eight years.

Varieties of children's slides

In construction and children's stores presented wide range of ready-made street and home slides for children. Small structures are suitable for installation inside the house, if the height of the ceilings of the dwelling allows it. But bulky slopes are more suitable for the street. Each model has its own design features, as well as different materials of manufacture:

The latter option is best suited for self-production and installation in a summer cottage or in the courtyard of a private house, due to the availability of material, the possibility of quick repairs or replacement of broken parts. In order to repair or mount a wooden slide with your own hands, you do not need to call specialists, use welding, etc.

A set of necessary tools

To make a wooden slide for children in the country with your own hands, you will need a fairly large set professional tool. Some tool is sure to be found in the garage or in the attic of every man, something will have to be bought or borrowed, for example, from a friend or neighbor. In order to make a children's slide out of wood you will need the following tools:

armed essential tool, you can start designing a future entertainment site and buying materials for making a ramp.

Create a project

Now on the Internet you can find a lot of ready-made drawings, diagrams, 3D projects, so you don’t have to “reinvent the wheel” on your own. Volumetric models with detailed instruction installation and list necessary materials will help to create designs for children of all ages. They may differ in the material for the descent, the type of stairs, supporting structures, height, etc. When developing a project for a children's slide made of wood the following factors should be taken into account:

In addition, the dimensions of the structure are taken into account, which will help to correctly calculate the width of the slope, the angle of inclination of the trigger element. When making a wooden slide in the country with your own hands, you should take into account the opinion of the baby and his wishes.

Materials required for building

Of course, the size and quantity of materials that will be used to create supports, stiffeners, railings, upper railings, steps and other elements directly depends on the dimensions of a homemade wooden slide for children. These details are specified when choosing a project for a play area. To understand what materials may be needed, as well as what the installation and construction process will be like, a children's slide project with a long slope of 3 meters and an upper platform of 50 * 50 cm is taken as an example.

List of building materials:

Additional building elements for fastening are galvanized self-tapping screws and anchors. If you need to ennoble the string of the stairs, then you should stock up on additional lumber.

Construction stages

The process of building a solid slide for children can be conditionally divided into several stages. This is preparation (of materials and installation sites), installation of playground supports, floors, manufacturing of ramps, stairs and safety structures. All these stages are important, poorly executed installation work, can reduce the operational life of the entire structure, as well as reduce the safety of use.

Preparation of materials and place downhill

First of all, you need to take care of the quality of the wood. It must be well dried, this will help to avoid deformation of the bars during the operation of the slide.

This is followed by the stage of processing lumber with an electric planer, which will quickly get rid of wood knots and notches. After that, you need to sand the wood and round the chamfers. The lower part of the beams is processed moisture resistant material, preventing the process of wood decay, for example, resin or waterproofing mastic.

After that, you can begin to prepare a place for a children's wooden slide. The land will need to be well leveled., and then mark the zones where the support elements will be installed. The depth of the holes in the corners of the square should be at least half a meter. The lower part of the recesses is covered with rubble and sand.

Installation of supports and floor

The support beams are securely installed in the prepared place, after which they are concreted. You can strengthen the structure with the help of a "bundle". To do this, small notches-grooves of 2 cm are made in the racks, a planed board is inserted into them, connecting the supporting elements to each other. Large screws or self-tapping screws are used as fasteners.

After the supports are installed, it's time to start installing the floor of the top deck of the slide. wooden bars stiffeners are laid parallel to each other, followed by laying floor boards. It is worth taking care in advance that the site does not accumulate rainwater, for this a small gap is left between the boards (5-7 millimeters).

Escapement manufacturing

If a factory-made plastic slope is used in the construction of a slide for children, then its installation will not take much time, just screw it to finished construction. When using lumber, floorboards are fastened together, and wooden railings are mounted along them.

The floor of the upper platform is attached to the slope in several ways: by forming an acute angle (the optimal slope is 45 °) or cutting grooves. Important point , this is a stripping of wood that forms a slope, it must be perfectly smooth. After grinding, the surface of the slope is coated with varnish or special paint.

Other materials can be chosen for the manufacture of the slope, for example, a slippery plastic sheet, galvanized steel, durable plywood, thick linoleum. Any of this material is superimposed on the tree slope, which improves the sliding process during the child's slide down the hill. To reduce the risk of injury for a children's slide, any irregularities, attachment points for self-tapping screws are ground and coated with special paints.

Installation of stairs and railings

The landing of a wooden slide, built by one's own hands, should consist of at least a few steps. The type of construction is selected individually, the ladder can be installed on a kosour or bowstring. How younger child, for which yard entertainment is being made, the smaller the march of steps should be. After that, you can proceed to fastening the fences, the dimensions and height of which directly depend on the dimensions of the structure and the age of the children.

After installing a children's wooden slide, it is recommended to take care of the safety of children who will ride on it. It is necessary to equip the landing zone, ennobling this place with a sand embankment or a soft sports mat. In advance, you need to take care of cleaning the space from thorny bushes, stones, pipes, etc. Periodic checks of the structure for dried out boards, especially after winter, will help to avoid unwanted childhood injuries. Such a slide goes well with other game elements made by with my own hands such as benches and sandboxes.

Skiing from the mountain is a favorite pastime for children of all ages, and only adults can provide them with convenience and comfort in this matter, and they will have more than enough fun and enthusiasm. A slide can be built from a variety of improvised materials, and from which will be discussed in this article.

What is needed for the slide

In order to make a slide with your own hands, you can use metal, plastic, wood, as well as improvised materials left over from the old cabinet and desk. At least with a little imagination, you can build a real miracle from them and put them in the corner of the children's room to the delight of your baby.

You can make a slide for your child from an old desk.

For this you will need:

lacquered cabinet door;
plywood sheet;
small boards, which can be pieces of a shovel handle, legs from a table or chair.

Manufacturing steps:

Making a hill of snow

Making a mountain with your own hands out of snow is very simple. The main thing is to wait until the temperature on the street approaches the mark of about 0 ᵒС. And, of course, the presence of a sufficient amount of snow is important.

And you will also need:

shovel made of metal or plastic;
construction spatula, scraper;
bucket or watering can;
warm gloves.

Manufacturing steps:

The primary task is to determine the location of such a homemade attraction. To minimize injury, it is imperative that you roll out onto level ground so that
the child could roll evenly until it came to a complete stop.
The height of the slide is determined based on the age of the riders. For crumbs up to 3 years old, an elevation of 1 meter high will be enough, and for older children, you can build a higher slope, the main thing is that the slope of the slope does not exceed 40 degrees.
Having rolled up several large balls, form the foundation of the future building from them. If you plan to make a sufficiently high slide, then you should consider how the children will climb it. The problem can be solved by making the same snowballs that can be laid at the foot in the form of steps.
Use a spatula and scrapers to level the surface of the steps and leave the structure until the onset of cold weather.
Fill the hill should be in the cold. It is not recommended to use a bucket or a hose for this, as there is a high risk of large holes forming. It is better to use an ordinary garden watering can or the one that housewives use to water indoor plants.
On a piece of plywood or a shovel with a wide working part, slowly pour water onto the structure. And you can cover the elevation with a large piece of cloth and pour through it - this will help the liquid to be more evenly distributed over the snow.
If, apart from the bucket, there was nothing at hand, then the water in it must be mixed with snow and cover the surface with this same slurry, leaving it to freeze overnight, and repeat the procedure in the morning.
Everything, the hill is ready. If necessary, potholes on it can be trimmed with a spatula.