Drawing of a children's slide made of wood. Children's iron (metal) slide for giving - step-by-step instructions for making. The choice of material for construction in the country

25.04.2020

On the site next to a country house or cottage, families with young children often equip a place for active games. Depending on your financial capabilities, desires and area of the site, you can choose one or another option. It can be a whole playground, a sandbox, swings or slides. Many designs are available from ready-made or you can assemble it yourself. You will learn how to make a children's slide with your own hands from the article.

Construction rules

Before you figure out how to make a slide for children with your own hands, you should study the rules for its construction and installation. You need to remember the following:

The slide must certainly be stable, functional, durable and have an attractive appearance. Its base can be concreted or use metal supports. All structural elements should be sanded and varnished.

Be sure to consider the age of the child if we are talking about preschoolers or younger students, then the height of the slide should be a maximum of 3.5 m.

Varieties of children's slides

You need to choose the sizes and materials for a homemade slide, depending on where exactly it will be installed. For example, if you need to make it not for the street, but for the room, then it should be small, and for production use materials such as:

laminate;
plywood;
wood and more.

The principle of their manufacture does not differ from the construction of street slides, but we are talking about much smaller dimensions.

And if we are talking about making an option for the street, then you should also decide on the material, since working with each of them may differ. And the properties of this or that material are also different, they have their pros and cons. Their characteristics are:

Using the last option as an example, you will learn how to build a do-it-yourself slide for the street. After all, it is wooden slides that are most often installed in summer cottages.

Do-it-yourself wood slide

Since the tree is the most available material, then for the construction with their own hands they use it. Besides, wooden structure easier to repair and easier to install. Unlike metal structures, you do not need to use welding machine and other complex devices.

Works on construction of a wooden slide start with preparations. How well you do them depends on how successful the result will be. At this stage, you will need to do the following:

at the installation site of the slide, remove the fertile soil and level the soil;
fill the site with sand and let it settle, tamp the soil;
prepare wood blanks (for example, boards for feet, a beam under the base, a railing or stringer and more), dry them, file them according to the drawing and sand them well. Then soak them with a protective mixture;
paint steps, handrails and boards for the "tunnel" in two layers of enamel, taking into account intermediate sanding;
prepare the side elements for lining the tunnel and the side and treat everything with impregnation.

When the preparation is over, you can create the basis for the future structure and perform subsequent actions. The algorithm is this:

Naturally, there are different manufacturing options. It all depends on what the design will be. Perhaps it will consist of two slides of different sizes and additional elements. It will be more difficult to do it yourself.

Stingray materials

Even the ramp itself can be made based on various materials. In addition to plywood, it may be suitable for:

plastic sheet (has the best slip characteristics, but may crack);
galvanized sheet 0.5 mm thick;
linoleum.

In addition, wood can be polished with wax. Some line the slope with a laminate, but this is not recommended, since the laminate tends to deform under load or moisture.

Ensuring safety and durability

During construction, it is necessary to follow a number of rules so that the structure lasts as long as possible, and parents do not worry about the safety of the child.

In particular, fix each structural element as securely as possible. It is not recommended to cover a finished wooden slide with a simple oil paint. It is better to use an acrylic coating or high-quality varnish. At least this applies to the slope as the most used part of the product. The decorative coating must be applied in several layers, each of which must be dried before applying the next.

The coating of the slope will wear off over time, respectively, it needs to be properly looked after. Each time before painting, the surface should be sanded, all deformations on the boards should be eliminated, and the cracks should be overwritten. And only after these actions the surface is covered with paint.

To ensure your child's safety while playing, remember the following:

periodically, a wooden slide should be inspected for deformations or cracked joints on the surface. This is especially important after winter;
it is better to install the slide in the shade, it is desirable that it is clearly visible from the window;
There must be no allergenic, poisonous or thorny plants near the installation site. And honey plants can attract bees, which can be dangerous for children;
Pipes, electrical cables or hoses must not be placed near the slide.

If the slide will be made for general use, then there should be enough space around it so that several children are there at the same time.

Being engaged in the construction of the slide, you need to carefully plan everything and foresee all the risks. Regardless of what material is used, you need to carefully study its properties.

Now you know how to make a slide with your own hands in the country or near a country house. You just need to choose the right materials for the job and follow certain parameters. Over time, you will be able to supplement the slide with swings, shells, a carousel and other devices.

Do you think children's play is unsafe? Are you afraid that your child might get hurt while looking for adventure? The best way out of the situation is not to ban, but to provide a safe place to play! Moreover, making a children's slide with your own hands is not so difficult. To do this, you need a minimum of material, a construction tool and a little imagination. BUT practical tips on construction, structural drawings and recommendations regarding the choice of building materials can be found below.

What you need to know to build a children's slide

The proverb about the need to measure several times before cutting off is especially relevant when building a play complex for a child. After all, mistakes in this matter are unforgivable!

Playground slide with swings

Five golden rules for the game slide

First of all, a children's slide should be safe and comfortable:

The descent must necessarily have a “brake platform” - a section where the slope is parallel to the surface of the site. Otherwise, the descent speed will not decrease, which may cause injury to the child.
The length of a do-it-yourself children's slide should be exactly twice as long as the height of the structure. So, if the length of the slope is 5 m, the height of the launch pad cannot be more than 2.5 m.
Within a radius of 1 m near the descent zone there should not be any buildings or fences. This is necessary so that the child cannot hit, having accelerated strongly.
It is necessary to provide a special coating in the descent area (sand, rubber mats, etc.). In rainy weather there should not be a swamp!
If a sandbox or a hammock is placed under the structure, you need to sew up the “ceiling” in advance and make a roof over the launch pad (to drain water). Otherwise, sand from children's legs will fall on the heads of those who are located below.

How to choose material for a ramp

The choice of materials for covering the descent is not so great. And, given the requirements that ensure the safety of the child, it is completely narrowed down to several options. But, before listing the features of these materials, let's figure out what it is impossible to make a children's slide from with your own hands:

Polycarbonate (especially cellular). This material, firstly, does not slide well, and secondly, when broken, it forms dangerous chips. In addition, in the summer, polycarbonate expands, forming waves. Therefore, the slide in hot weather will quickly become unusable.
PVC panels. A very fragile material that is not able to endure harsh winters.
Glass mats. Categorically not recommended for contact with the skin of a child.

Winter slide from monolithic polycarbonate

How to achieve a "mirror" wood surface

Building a wooden children's slide with your own hands is a reality! But only if you are willing to set aside a few days to make a slippery wooden ramp. Indeed, in order to apply several layers of yacht varnish and sand the surface in between applications, it will take a lot of time.

What is attractive wooden slide

Advantages of a wooden slide:

The child will be surrounded by environmentally friendly, natural materials.
The surface will not heat up as much in the heat as, for example, metal.
In winter, a wooden slope can be filled with water and turned into an ice slide.

Disadvantages of a ramp made of wood:

If there is sand on the site, then the varnished surface will become unusable very quickly. Children will bring sand on their clothes and scratch the stingray with it like sandpaper. So be prepared to renew your coverage every year!
The slightest oversight while grinding the surface - and the baby is provided with splinters and scratches after riding.
In any case, the sliding speed on a wooden surface will be low, which will quickly make a wooden slide uninteresting for growing children.
AT summer time the slide cannot be converted into a water park, that is, to supply water to the ramp.

A selection of drawings of a children's slide made of wood for DIY:

A simple drawing of a wooden slide

Low slope for small children

Game complex with a slide

simple model

Advice! Instead of wood, it is better to use Finnish plywood to cover the slope of the slide. It is much more moisture resistant and perfectly tolerates the effects of precipitation.

Secrets of the slippery surface

A few secrets on how to make a children's slide made of wood really slippery:

Wooden descent (dry and sanded) can be coated with a special oil that protects the surface (for example, "Pinotex"). This must be done in several layers. Thanks to this procedure, the tree will not lose its smoothness, and moisture will roll off well without destroying the surface.
Layer-by-layer sanding of the wood after each application of varnish will help to achieve the effect of a mirror surface and make the slide really slippery.
Plywood slope can be covered with liquid acrylic used to repair bathtubs. In addition to excellent glide, this option is also good because you can choose almost any color of the coating! But it should be remembered that scratches form quite quickly on it, into which dirt will invariably accumulate. This will not affect the functionality of the slide, but the appearance of the structure will be spoiled.

Escape from polished wood

Advice! The joint of plywood sheets looks much more aesthetically pleasing if their edges are sawn off with a jigsaw at an angle of 45º. In this embodiment, the sheets are arranged as if overlapping, and one element “creeps” onto the other.

Metal coating - we take care of the safety of the baby

A ramp made of stainless steel or galvanized sheet is a “classic of the genre” during the construction of a do-it-yourself children's slide. But this solution also has its drawbacks.

Firstly, in order to cover the entire slide, you must either overlap or spend money on a much more expensive sheet of metal bigger size(sheets are available in lengths of 2.5 and 6 m). There is a third option - to allocate time to search for a construction company that will agree to "cut off" the necessary piece of stainless steel from the existing roll.
Secondly, stainless steel (like other metals) gets very hot in the sun. Therefore, it is recommended to place the ramp on the north side in order to reduce the intensity of lighting of the structure. But such a layout is not always possible on the site!
Thirdly, thin steel is very sharp and completely unsafe for a child. An inaccurately bent corner can cause serious injury to the baby! Therefore, it is necessary to bend the sheet very carefully, firmly fixing it to the base shield.

Metal slide with handrails

Advice! Instead of a galvanized sheet to cover the slide, you can take an alucobond (aluminum panel) and attach it to liquid nails. The advantage of this solution is a wide color palette of the material!

Secrets of a good metal slide:

The shield under the stainless steel sheet should be perfectly flat, without protrusions and drops. After all, stainless steel is extremely thin and does not compensate for surface flaws. For this, it is better to pre-sheathe the boards of the structure with fiberboard boards.
It is not recommended to buy mirrored stainless steel, as it heats up much faster and more strongly on sunny days. Much more best option- polished stainless steel.
The sheet should be much wider and longer than the slide itself. Indeed, for the safety of the child, this coating around the entire perimeter must be bent and hidden under a kind of baseboard or board.

Advice! It is necessary to fasten a sheet of metal only along the edges (to the sides and bottom). It is absolutely impossible to make fasteners on the surface of the slope of the slide!

Slide from flooring - cheap and cheerful

Another interesting and inexpensive option- covering the slide with a sheet of linoleum. The advantages of this solution are obvious:

the material is relatively cheap (you can buy scraps that are sold at half price);
under linoleum, a perfectly flat surface is not needed due to its thickness and softness;
the base does not rot under this material, it protects the tree from moisture and temperature changes (if the linoleum is on the sides, in the summer the slide can be made water);
linoleum softens impacts and does not form dangerous sharp corners, chips or splinters, like other coating options.

Linoleum slide suitable for home

But such a slide has enough disadvantages:

the coating must be changed annually due to its rapid wear;
in very hot weather, linoleum can melt, which is dangerous in terms of getting burned;
the sliding speed on this material is quite low;
the design with linoleum does not look very aesthetically pleasing.

For optimal glide, you can provide felt or felt mats for skating.

We build a wooden slide for a child - step by step instructions

The dream of every child is a multifunctional playground with which you can realize any ideas for games. So, step-by-step instruction to build a children's slide with their own hands.

Competent preparation is the key to successful construction

Preparatory stage:

Remove fertile soil at the construction site and level the soil. Fill the site with sand and let it settle, compact (it is advisable to complete this stage in the fall, and start building the slide in the spring).
Prepare wooden blanks (kosour, railings, boards for steps and "tunnel", timber for the base): if necessary, dry everything, saw it to the selected dimensions and carefully sand it, and then impregnate it with a protective mixture.
Paint steps, handrails and boards for the “tunnel” with multi-colored enamel in 2 layers with intermediate sanding.
From the 12th plywood, cut out the side elements (for lining the tunnel) and the sides of the slide. Treat the elements with impregnation.

Technique for mounting the base of the structure

Frame assembly:

Build a foundation. To do this, it is necessary to make holes with a garden drill, install reinforcement in them according to the level and fill everything with concrete.
Weld the corners to the reinforcement. In the pillars for the base of the slide, make cuts and mount the timber on the corners, securing everything with self-tapping screws. Connect the poles to each other with braces.
Make a ladder: fix stringers (preferably added on the back side of the board for additional structural rigidity), fill steps on them.
Mount the launch pad to which the ladder leads.
Next, make a base for the descent from a bar and install a curved metal profile (25x40) for the ramp.

Bearing structures

The final stage - we finish the construction

Do-it-yourself ramp and sheathing for a playground for a playground:

Lay a plywood shield on the base for the slope and make a galvanized iron flooring. Along the perimeter of the sheet, bend and attach from below to the metal profile. In the boards that form the platform, cut a gap and also wrap the iron flooring there.
Under the slope, make a tunnel from the boards. Sew up the sides with plywood.
Install the sides on the slide and the railing on the stairs.
Mount hipped roof and cover it with pre-treated plywood.
Sew up the side parts of the structure with plywood sheets and cut holes in them for a climbing slide.

Organization of the slope and sheathing of the slide

Creative slides - we make the dreams of a child come true

Children's imagination is strong and sometimes incomprehensible. In the imagination of a child, even the simplest hut can easily turn into a beautiful castle! Therefore, for fun, a simple descent with a ladder will be enough for kids. However, there are a lot of options on how to make a children's slide with your own hands in an extraordinary way and with fiction - examples in the photo.

Downhill Treehouse

Protected by a stone lion

Advice! In order to keep interest in the slide for a long time, it is desirable to provide additional entertainment elements on the launch pad.

Playground- the dream of every child aged 3 to 13 years. And in order for the play area to meet the changing needs of children, you need to think through all the details at the planning stage. For this, you may need to invite a specialist who will save you from having to make a children's slide with your own hands. And then a real gaming complex will appear on your site - safe and comfortable.

Video: do-it-yourself children's slide

Today we'll talk abouthow to do winter do-it-yourself children's slide.Consider detailed drawing and construction schemes, we will discuss the material and tools for the construction of this object.

The slide is the most interesting projectile for active games on the playground. To please your child, it is not necessary to buy expensive turnkey solutions, of which there are many on the market. Today you have the opportunity to create a slide yourself. I hope the article will serve you as a good hint and will be useful in the construction.

So let's get started. From the tool - trimming, or a hand saw, screwdriver, tape measure, pencil. For fastening parts - wood screws.

Material - dry planed board with a thickness of at least 25 mm, or, as in our case, a floor board with a thickness of 28 mm and a width of 133 mm (without a spike). Our drawing is made for a board of this size.

Scheme for the construction of a children's slide.

We divide the construction of the slide into 3 stages: a pedestal, a slope, a staircase.

First of all, we assemble the pedestal, to which the ramp and ladder will later be attached.

We start with the side frames. Spike, if you use a floor board, cut off.

We fix the guide for the flooring according to the dimensions indicated in the diagram.

We twist the sides together and pave the floor.

At the second stage, we build a slide slope.

First, we make the flooring for the slope. We cut boards 2000 mm long, connect them with each other - a spike into a groove. We take into account the size of the opening of the pedestal for further fastening the slope, in our case it is 900 mm. We put the transverse boards for the bundle, stepping back from the edges of the slope by 200 mm, and twist the structure.

We prepare the sides. If you are using a floor board, then it is advisable to cut off the spike and turn the groove of the board so that it looks down. We make cuts for fastening to the pedestal.

We connect the sides with a slope

We fasten the slope to the pedestal.

The third stage - we mount the stairs. First, we prepare the guides for the stairs in the amount of 2 pcs.

We fix the guides on the pedestal.

We fasten the sills. The height of the sills is 200 mm, the number is 4 pcs.

Most favorite place for games with a child - this is a children's slide. Probably, only this entertainment helps to throw out all the extra energy, jump from the heart, and also give the baby an unforgettable vivid experience. The children's slide is a complex structure that resembles a whole play complex. Such structures can be found on city playgrounds. On the one hand, the slide has steps, on the other - a small descent. For safety reasons, slides are equipped with handrails and railings for lifting and lowering. As a rule, such structures are small in height and may have one or more slopes. If you have Vacation home, then you can buy a children's slide not only under the order, but also do it yourself.

It is important that the slide fits all safety standards. You can not install a slide near decorative electric lamps and trees, greenhouses, outbuildings, etc. A shadow should fall on some part of the slide. It is not good for babies to stay in the sun for a long time. What is needed in order to create a children's slide? First, decide on place for construction, sketch out a drawing and diagram of both the slide as a whole and its individual parts.

The structure must be well secured. metal support or concrete. The details of the slide must be well sanded and varnished.

Supports, handrails and railings should be well fortified.

The size of the building should also be taken into account. It must be appropriate for the age of the child. For younger students, the height of the slide should reach no more than 3.5 meters.

Necessary tools and materials

To build a wooden children's slide with your own hands, you need the following: materials:

Instruments to build a slide:

A hammer
Electric drill
electric planer
Electric saw or wood saw
Roulette
Angle cutting machine
Drill

Work order

The children's slide is almost ready, it remains only to remove the protruding corners, screw and nail heads, carefully sand the boards and cover special protective varnish.

In addition to the slide, you can also install swings, horizontal bars, rings and other elements for children. Over time, it can be complicated by building a house, sports sectors, etc.

Do-it-yourself secrets of installing a children's slide

Grooves and slats when screeding parts form a strong and stable construction.
In order for the baluster to be firmly installed, the stairs can be additionally reinforced with planks.
Best for painting acrylic. These paints perfectly protect against negative influences.

Thanks to on one's own manufactured design, the child, along with their peers and friends, will have fun and usefully spend time. Children's slide will give a lot of positive emotions.

Children's mini playgrounds are usually arranged in the yards of even small ones. country houses. Their obligatory attributes and slide. Of course, you can buy a ready-made version of such designs in the store. But it is much more interesting to make them yourself, right in your garden. Yes, and it will take much less money to equip the site. In this article, we will talk about how to make a children's slide with your own hands.

Requirements for a children's slide

Of course, a wooden slide with your own hands should turn out to be safe. To achieve this, the following requirements must be met when drawing up a project:

The finished structure should not have sharp corners and protrusions that could injure a child.
The upper platform, stairs and descent are necessarily fenced with railings.
Do not use flammable materials in the manufacture of slides.
When choosing the angle of inclination of the descent and the height of the slide, you need to take into account the age of the child. Most often, such structures are collected for children 5-9 years old. In this case optimal height will be 1.5 meters (up to top platform). The slope of the descent for such slides is usually 55 degrees.
And, of course, the structure must be assembled from environmentally friendly materials. Most often, do-it-yourself slides are made of wood. To assemble a slide from metal, a welding machine is required. And it is not available in every household.

Drawings and diagrams

In one of the drawings above - children's house with a hill.

What materials are needed for a children's slide for a summer residence

To mount the slide, you will need a 100x100 mm timber, a 200x30 mm edged board, a long piece of galvanized sheet, bitumen and crushed stone. All lumber must first be sanded with a grinder and impregnated with anti-rotten and refractory-enhancing compounds. From the tools you will need to prepare a grinder with a grinding nozzle, a garden drill, a screwdriver or a hammer. Elements can be fastened with nails or self-tapping screws. You will also need galvanized corners. A do-it-yourself children's slide should be, first of all, safe, so you only need to choose quality materials. Below you can see step by step photo with instructions.

Previously, downhill, markings are made on the ground. Assembly begins with the installation of supports. They are made from thick timber. Holes at least 70 cm deep are drilled in the ground with a garden drill. A little crushed stone is poured onto their bottom and tamped down. The ends of the bars are coated bituminous mastic, drying oil or and set strictly vertically. Backfill is made with crushed stone.

Jpg" alt="(!LANG:Setting supports" width="300" height="225" srcset="" data-srcset="https://remontcap.ru/wp-content/uploads/2015/04/09304755-300x225..jpg 1024w, https://remontcap.ru/wp-content/uploads/2015/04/09304755.jpg 1500w" sizes="(max-width: 300px) 100vw, 300px">!}

Attached to the racks bottom harness(at a height of about 40-50 cm from the ground). Next, support bars are stuffed under the platform. If it is supposed to make a canopy over the slide, the upper harness is attached. The handrail of the platform is fixed on the corners.

The descent is assembled like this:

With the help of bars (across, from the bottom side) 3 boards are connected.
Smooth tin is stuffed from above. It must be fastened in such a way that the edges do not subsequently move away, and the children could not get hurt. It is best to bring them to the ends of the boards.
On both sides of the finished descent, the sides are attached. It is better to fix them not on nails, but on self-tapping screws. ends at the required angle.

Ladder assembly

The steps of the slide must be safe. Their optimal height is 12-15 cm. The angle of inclination of the stairs may be slightly smaller than that of the descent. The easiest way is to fix the steps on the bowstrings. To do this, two boards are fixed to the racks at the level of the upper platform. Further, from the inside, support bars under the steps are stuffed on them. Then the treads themselves are attached. It is not necessary to install risers.

The final stage

The last step should be to attach the descent to the support posts at the level of the site. In this case, it is also better to use self-tapping screws. Next, the floor of the site is sheathed and a canopy is installed. The latter is most often made double-sided. In this case, two racks are attached to the upper harness. A horse is fixed on them. Four rafters are fixed (two on each side) and plywood is sewn on. The platform railings are covered with boards. Further, the entire structure needs