coupe 

How to make garden paths. How to make a garden path with your own hands: paths made of concrete, stone and wood. Walkway made of bricks or paving slabs

How beautiful the suburban area looks, on which flower beds are neatly planted, fruit trees and shrubs. But, it is the laid out paths that give the finished look to the territory. In addition to practical, they also perform an aesthetic function - they visually delimit the site into separate zones. If you decide to design garden paths yourself, then you can not do without the guides given in this article. So, do-it-yourself paths in the country, an economy option. How to arrange and equip? What is the preferred material?

The design and style of the tracks can change appearance site. There are many ways to arrange garden paths. Many of them do not require special knowledge and the use of special tools. As a material for work, you can choose the most acceptable and appealing to you. Further, several ways will be given for arranging a garden path in a country house with your own hands from improvised materials.

The material for arranging the path can be: logs in the section (both transverse and longitudinal), bricks, large pebbles or even ordinary corks from plastic bottles. If the site is not operated in the autumn and winter time, you can consider options for removable tracks. In this case, the coating is placed only on summer period, it can be purchased at ready-made, but you can do it yourself.

Whichever track option you choose, you can't do without preparatory work Location on. This is an important and responsible moment. Any construction works must begin with the planning and marking of the territory.

When you have visually outlined the location of the tracks for yourself, the stage of drawing them onto the site plan comes. This can be done in a special computer program or on a drawing manually. First of all, capital structures, such as a house and outbuildings, are applied to the plan. The main zones of the backyard territory are drawn, which also require paths. The buildings must be connected to each other by paths. It is also important to outline the passage from the entrance gate, and connect it with those already outlined. These are the main and main tracks that will provide functionality and convenience. Further, it’s up to your imagination, you can also connect the main areas of the courtyard with paths, such as a playground, a zone, a shower and a toilet (if they are outside the house), a gazebo for relaxation.

It is important to note the paths that will act as auxiliary ones, as a rule, these are passages to the garden or individual areas of the garden, the main sources of irrigation. If necessary, one or a couple of tracks can be branched, which will cover a larger area. When marking the tracks, it is necessary to take into account the features of this area and its size, for example, on a plot of 4 acres, the main tracks and a pair of auxiliary ones will be quite enough. On a site with a larger territory, more tracks will be needed. You can make tracks of different widths, for example, make the main ones wider, and lay out the auxiliary ones from a different material, this technique will perfectly prioritize. After all the tracks are plotted on the plan and correlated with each other, it's time to apply them directly to the ground.

The fact is that the visual perception of the tracks may differ from the one you outlined on the plan. Marking is carried out using driven pegs or poles, on which a cord or tracer is pulled, this allows you to visually assess the width and direction of garden paths. This moment is especially important if you are planning to lay a path from ready-made slabs or bricks of a certain size. In order for the contours of the path to stand out more strongly and be clearly visible, they can be sprinkled with dry lime. This will allow you to better evaluate and adjust the location of the tracks. Remember, the tracks are not laid for one year, and their dismantling is a problematic and troublesome task.

Such a marking is considered ideal, in which, along with the paths, the proposed flower beds, large trees or shrub plantings are marked on the ground. To designate roadside plants, you can use both large stones, wooden signs, or simply draw an outline with lime.

After transferring to the area and the final verdict, everything suits you as the owner, it's time for more serious work. Namely, soil preparation.

So, it will be necessary to dig a trench, which will serve as a foundation (a kind of foundation) for our path. The pit should be slightly wider than the width of the intended finished passage. Indeed, in order for the path to turn out to be durable and not exposed to natural factors, it must be framed on the sides with concrete or stone curbs. This will extend the service life and protect the track from destruction and deformation.

These preparations are a must. They should be performed when laying a track from any material.

So, you will have to carry out a number of works that will be aimed at preserving and improving the functionality of the track. This will prevent the germination of grass, washing out the track. And also you need to take into account that the surface of the track should assume a slight slope, which will allow excess water to drain. It is good to make a special drainage system, in other words, to dig a drainage trench along the path.

Preparation and ground work:

  1. work begins with the removal of the top layer of soil, this must be done over the entire area of ​​\u200b\u200bthe intended path. The depth of such a pit should be such that the entire fertile layer of soil is removed. At the same time, it is desirable that the depth of the entire pit is the same; you can control the depth with a ruler;
  2. the next step is to sprinkle the sides of the path with sand and install boards that will help keep the track neat and shaped; when using concrete curbs, it should be borne in mind that the width of the curb itself must be greater than the height of the trench wall. An important point, the curbs should be leveled with a level, and in order for them not to move, fix them with reinforcing bars. The reinforcement is installed from the inside of the curb, so that the upper (above-ground) part of the reinforcement supports the curb well;
  3. if the soil is very loose and does not allow you to evenly install the curb, you must first knock down the reinforcing bars along the entire length of the track. And then put the curb and also fix it with fittings from the inside;
  4. when the pit is ready, and the edges are framed by curbs, the moment comes for gravel or gravel to fall asleep. In this case, the main backfill material should be mixed with sand. It is necessary to try to make an even layer and make sure that there is no empty space;
  5. further, the layer is leveled and rammed. After - moisturizing. After some time, the tamping process should be repeated, so the path will be protected from landslides and deformation.

The material for backfilling the trench must be selected depending on the required thickness of the “cushion”, as well as on the type of top facing material. But, regardless of the material of the top coating and the material of the "cushion", there must be a layer of sand between them.

Types of paths for a summer cottage

There is a wide choice of materials for country paths. You need to choose the one that best fits into the style of the site and emphasizes its dignity. So, below are photos of the paths for giving, made by hand from improvised materials. Materials can be combined, but this process requires certain knowledge and skills, due to the fact that the service life and wear resistance of materials can be different.

Brick is a versatile building material that is used on a par with paving slabs to decorate paths. This trail is durable and strong. And outwardly, this version of the garden path looks neat and aesthetically pleasing. In order for the brick path to come out really strong and last a long time, it is necessary to adhere to the technology proper styling and the choice of the brick itself. For these purposes, a special clinker brick is better suited. This type of brick is made from a certain type of clay using particularly high temperatures. Distinctive feature clinker brick - strength. It is thanks to this property that this variety is used for laying paths and sidewalks. The brick has water-repellent and heat-resistant properties.

The main points in laying bricks, as the outer covering of the track

After tamping the "pillow" of gravel, it is worth pouring a fairly thick layer of sand. It should be well compacted, moistened and compacted again. Next, the sand layer needs to be well leveled, this can be done using an ordinary wooden board. The board should be slightly longer than the width of the trench, the end side, which will be leveled, should be perfectly even and smooth. Saw cuts are made in the board, approximately 2/3 of its width. They will serve as a limiter and allow you to create a flat surface of sand.

After the layer of sand has been leveled, you can start laying bricks. This process should begin with the installation of side bricks, around the perimeter. To do this, you need a rubber mallet that will allow you to drive the brick to the required depth without damaging it. The brick is deepened by about half. If the path is not framed by a curb, the side bricks must be fastened with mortar. After solidification of which, the formwork is removed, and the edges are reinforced with reinforcement. And also you can not do without gravel, which is poured along the path and compacted.

After installing the side bricks, you should think about the desired pattern, the brick can be laid on the end or on its wide part. For a more durable brick laying, it is worth alternating the location. So, one row is laid parallel to the track, and the next - across. To prevent the germination of grass, the gaps between the bricks should be filled with special glue, which is based on cement mortar. When working with glue, you should make sure that it does not protrude outward, this can ruin the look of the finished track. The next step is to fill all the cracks with sand. This process is pretty simple. Sand is simply poured from above onto the path and evenly distributed with a brush with hard bristles. Excess sand is simply swept away.

In order for the brick to be brighter and more attractive, it can be treated with a penetrating type of primer. After drying which, apply a layer of varnish, which is used to process stone in an outdoor environment.

By a similar principle, the laying of garden paths from thick paving slabs.

Walkways made of wood

When arranging a path from tree slices, two options can be distinguished. One of which involves filling the entire area of ​​\u200b\u200bthe path with round logs, and in the second, only the sides are laid out of round logs, and the middle is filled with gravel or pebbles.

This method is considered more time-consuming and complicated, but the end result will delight the eyes of not only the hosts, but also the guests. The tree from which the path is planned to be laid must be well dried. At the same time, it is important that the wooden chocks are even and smooth, so it is worth cutting it with a well-sharpened saw, in one smooth movement. After a sufficient number of round timber has been cut, they should be well cleaned and processed. It is best to do this with a grinder, in its absence, you can use sandpaper to work with wooden surfaces, so the process will take longer, but the quality will not deteriorate. It is recommended to use logs of different diameters in order to have as little empty space as possible in the path. So, alternating large wooden chocks with small ones, you can achieve a denser masonry.

The height of the logs for the path should be half the height of the walls of the prepared trench (measurements should be taken when the foundation pit is already well compacted and covered with gravel). So, the columns should decently protrude in height in relation to the formwork.

Wood is a material that is highly influenced by natural factors. With improper processing or its absence, the track may begin to rot, dry out or be attacked by pests. After sanding, the logs should be well treated with a special antiseptic, it is possible only in their lower part, or as a whole. To do this, chocks from a tree are placed in a metal basin, with a septic solution diluted and prepared in advance (the solution should cover about 4-5 cm of the bottom of the log). This process is quite lengthy, each log must stand in the solution for several minutes. While the wood is being soaked with the solution, you can take a wide brush and work on the rest of the log. Important! Before filling the pit with round timber, the tree must dry well.

The next step is to process the wood again and protect it from moisture. For these purposes, "Kuzbass varnish" is well suited. The lower part of the deck should be dipped in varnish for a few seconds. It is not recommended to completely cover the log due to the fact that this varnish is highly susceptible to sunlight. Under the influence of ultraviolet, the treated wood begins to crumble and become too dry. Tar can be a good alternative to varnish. To cover the wood, the tar is heated and applied to the log. After hardening, a rather strong film is formed on the surface of the logs, which will protect the wooden path from excessive moisture.

Installing chocks on the base of the track

Prepared and processed logs are installed as follows:

  1. at the end of the path it is worth pouring sand;
  2. on the sand base the first row is installed. Logs for the initial row should be selected with the same diameter;
  3. the space between the chocks is covered with sand, the sand level must correspond to the level of the side formwork;
  4. the second row of logs is installed. Here, round timber should be selected in such a way that they are in maximum contact with the first row, and there is as little free space as possible;
  5. it is worth filling the voids between the logs with sand;
  6. further technology of laying chocks consists of repeating these actions;
  7. before installation last row, the base of crushed stone must also be sprinkled with sand and only logs should be placed on it;
  8. at the final stage, the edges of the path wake up with sand and compacted.

This option - good example of how you can do it inexpensively in the country with your own hands - the photo shows examples of the design of such paths.

Wooden paths are also popular, in which logs act as side walls, and the interior space is filled with gravel or simple rubble. This is a more economical option, which is installed using a simpler technology. In this case, the same technology for preparing and processing wood as in the previous version should be observed. The foundation of the track is carried out according to the rules described earlier.

So, after the base of the path has been dug and prepared, and the tree has been processed and is ready for further work, the moment comes for the formation of a sandy “cushion”. To do this, a layer of sand is poured onto the crushed stone and is well rammed; if necessary, the sand can be moistened. Logs are installed along the extreme boundaries of the track. Here, too, it is worth making sure that the chocks are in close contact with each other. After that, logs are installed along the edges of the path, their base is covered with sand and compacted. The next step is to lay geotextiles over the entire area of ​​\u200b\u200bthe path between the stumps. This is a special fabric special kind fiber, which will help improve the drainage of the finished path and prevent plants from sprouting. The edges of the fabric should be carefully wrapped on the walls of the logs.

Further, there comes the moment of filling the path with gravel, for this gravel or crushed stone is covered in small parts and evenly distributed over the entire area. If necessary, gravel is topped up until its level is equal to the level of the soil on the site. When the path is ready, you can cover the logs with paint for external work, this is true in cases where the hemp turned out to be of a different shade. You can not do this, so the path will have a natural look.

Paths made of fine gravel framed by large blocks of stones look unusual. The laying technology is the same as in the case of a curb made of wooden chocks, only instead of wood - stone.

The tree for the device of this type of tracks must be correctly processed. It is better to purchase a ready-made board for the attic. So, the size of the boards will be the same, and you can proceed immediately to the installation. Combined paths look spectacular, in which the tree alternates with small pebbles. At the same time, the color of the stones can be monophonic, or it can be multi-colored, assorted. The basis is prepared according to the already described technology. A layer of sand is poured onto the rubble and carefully compacted. Boards are placed on top, at the same distance from each other, and the space between them is filled with pebbles. The beauty of such paths is that they do not require a border or frame. Such paths look interesting if they are simply sprinkled with pebbles on both sides and lightly tamped down.

A variant of the track that uses only a wooden board is good to use on lawns. In this case, the path from the boards can be decorated with a border of wooden chocks or made like a decorative fence around the edge.

Among lovers of aesthetics and natural materials, paths made of smooth stone, which can be laid in the form of a mosaic, of various patterns, are rapidly gaining popularity. Such a path will become an adornment of any backyard territory. In fact, this is a well-forgotten old one, it was according to this principle that not only paths in the yards were previously laid, but roads were also made. Certainly, this process slightly modified and adapted to the realities of our time. Such paths will look pompous in areas with a large territory, harmonize well with various sculptures or fountains. The practicality and strength of the track will depend on the selected stone and auxiliary materials. The only thing to think about is that these kinds of paths get pretty slippery when wet. Therefore, it is worth choosing in advance and special blend for a treatment that is applied to the finished track and reduces slip.

An interesting and beautiful pattern is obtained using Altai river stone. This stone has a characteristic color that can vary from light blue to dark gray. To arrange a garden path in this style, you will need:

  • smooth stones of different sizes, but similar shapes;
  • sand;
  • a special hammer designed to work with stone (usually a rubber or wooden hammer);
  • cement mortar;
  • sponge;
  • level.

Preparatory work begins with the preparation of the base of the track. This is done according to standard scheme. Next, you need to sort out the stones, decompose them in size. Stones with obvious shape defects or large chips should not be used. If the defects are insignificant, then a path can be laid out from such stones, but at the same time, the pebble should be placed so that the flaw is not visible.

Most often, stone paths are laid out in patterns that resemble curls. In order for the finished path to have an attractive appearance, it is worth preparing a sketch according to which the stone will be laid. Such a sketch is transferred to the base of the track. It is convenient to do this with a solution of lime or ordinary paint. For further work on laying stone, you need to mix sand with cement (proportion 3: 1). By gradually adding water and mixing well, it is necessary to achieve a thick consistency that holds its shape well. The main lines of the sketch are laid out from the prepared mixture.

The stones are laid out on the solution and slightly pressed into it. Thus, a curl of stone is obtained, which is part of a large pattern. The laying of the stone must be adjusted to the level, if the mortar has already set a little and it is difficult to do it with your hands, then a hammer is used, with which the stones are gradually knocked to one level. There should not be sections in the path where at least one stone goes beyond the general level. According to this principle, the entire area of ​​\u200b\u200bthe path is filled, oval stones are placed on the edge, forming the main curls, a round stone can be placed inside the curl. Experts recommend first laying out the main large curls, and only then fill the cavity between them with smaller patterns or just stones.

Yes, playing colors and the shape of the stones, you can achieve the authenticity and attractiveness of the path. An important point is to moisten the track, this must be done immediately after laying out the pattern. The fact is that in the process of drying, the solution tends to give off moisture, if the masonry is not moistened in time, then the track may crack, deform, or simply fall apart without gaining strength. You can humidify with a spray bottle or a regular hose with a shower head. In addition to practicality, this procedure also has an aesthetic moment, thus, excess solution residues are washed off the stones. If immediately after the formation of the pattern, the path should simply be moistened, then after a few hours it is recommended to moisten the entire area of ​​\u200b\u200bthe path well.

If the technology of laying a garden path made of stone, using a mortar, seems time-consuming and complicated to you, then you can use a somewhat simplified option. In this case, the stones are laid out on a sandy "pillow", without the use of cement. To do this, it is necessary to compact and moisten the sand layer well. Put a pattern on it. In order for your path not to crumble even in the process of laying out the pattern, you need to install auxiliary wooden partitions. The pattern needs to be laid out on a small area, in stages. When the entire path is filled with curls, the wooden supports can be removed, and stones of suitable size can be immediately put in their place.

The process of laying the stone is not much different from that described earlier. So, a layer of sand is placed on the base of crushed stone, moistened and compacted. Next, limiting struts are installed, the cavity between the struts is filled with well-moistened sand and leveled with a yardstick. It is better to put stones in several pieces at once. At the same time, bringing them under the level and tamping with a hammer. As it dries, the sand needs to be additionally moistened. The cavity between the stones, on the already finished pattern, is filled with sand, and the excess is removed with a brush. The entire track must be well moistened. After waiting for drying, the procedure with filling the cracks with sand and moisturizing it should be repeated several times. This will ensure the strength and safety of the finished track. It is better to repeat such manipulations for several days, the final stage, the surface of the stones is cleaned with a damp sponge.

Such a garden path should be framed by a curb. This should be done after complete drying and dismantling of the formwork. The material for the curb can be large stones or ordinary bricks.

A strange, but very practical option for arranging a path in the country with your own hands, from improvised materials. If you approach this process with a creative fervor, you can create a unique, colorful and amazing track. It is difficult to imagine a more accessible and improvised type of material. True, the process of harvesting and collecting caps from plastic bottles can be long, but the time of such waiting is fully compensated by the appearance of the finished track. And also it is worthwhile to think carefully about the sketch according to which the mosaic will be formed. A big plus of installing this type of track is that the track can be assembled in parts. So, having collected a sufficient number of covers, you can collect independent fragments of the track, which will then be connected together.

In order for the covers to hold the desired shape, they need to be connected to each other. For these purposes, it is better to use an awl and a simple fishing line. With the help of these tools, it is possible to firmly and accurately connect all the fragments. In order for the holes in the lids to be of the required size and less noticeable, before piercing, the awl must be heated over an open fire. It is more practical to use an awl with a wooden base, so you do not risk getting a thermal burn. Holes are pierced in the side of the cover, approximately in the middle. A fishing line is inserted into the holes made. Thus, the covers are assembled into a certain pattern, and then the patterns form a canvas for the track.

The process takes a long time, and the work is quite painstaking and requires perseverance. But there is a huge plus that covers all the shortcomings, this is that this type of track does not require extensive preparatory work. No need to dig a pit and fill it with rubble. It is enough just to clear the surface of the soil from plants, you can lay a special fabric that will not allow weeds to germinate in the cavity of the track. You can also treat the topsoil with a weed killer such as Tornado or Roundup. The already laid out path of the covers should be lightly tapped over the entire area with a hammer.

And to extend the service life and add practicality to the finished track, you can use a curb fence. This is a very simple and fast process. The top layer of soil is removed from both sides of the track. It is not worth digging deep, a depth corresponding to 2/3 of the height or width (depending on the laying method) of the brick is enough. The dug trench is compacted and wakes up with sand, which, in turn, is moistened. The brick can be placed on an angle, vertically or on an edge. At the same time, it is good to drive the brick into the sand base well. The gaps between the bricks in the curb are filled with wet sand.

Concrete paths can be found on every third suburban area. This is due to the fact that these paths have a long service life, are easy to install and do not stand out much against the general background of the site, which allows us to call them universal paths for a garden or a summer residence.

In order to equip a concrete path, you need to carry out preparatory land works. As already described above, measures are being taken to mark the soil and dig a pit. Curbs, formwork are installed and fixed with reinforcement. The first layer of the "cushion" is sand. It should be tamped and moistened, leveled. A layer consisting of crushed stone is placed on top of the sand. Everything is tamped down and aligned. For greater strength, it is recommended to put a reinforcing mesh on top of the crushed stone layer. Next, there are two options for laying concrete. The first, which assumes a flat surface of the finished track. In this case, concrete is simply poured according to the shape of the formwork and leveled. The flooded surface should be strengthened; for this, it is poured on top of the track a small amount of dry cement, it should be immediately rubbed using grout. For these purposes, a ready-made topping mixture, which can be purchased in stores, is also suitable. building materials.

The second option involves the presence of a pattern on the surface of the finished track. The procedure for pouring concrete in this case occurs in two stages. At first, the base of the track is only half-filled, while it is worth making sure that the height of the concrete layer is the same, and the surface is as even as possible. After the concrete has set a little, special forms are installed on it. When using such forms, the surface is obtained with an imitation of a small relief of stone or paving slabs. The form is filled with a concrete solution and left for a couple of days. After the concrete has dried, the form is removed, and the manipulation is repeated. You can use several forms with the same pattern at once, this will speed up the process. With the help of this concrete pouring technique, you can not only arrange a garden path, but also make such a coating in a summer gazebo or in a garage.

An interesting and unusual alternative to concrete and brick paths is modular plastic paths. Such paths are laid only during the summer season. As a rule, they are made of plastic plates that are interconnected. The beauty of such a track is that there is no need to carry out any preparatory measures before laying it. Such a path can be easily transferred to another place in one season. This is a kind of constructor that allows you to create tracks of any width and shape. Fasteners firmly fix the parts. The main advantage of tracks made of such panels is a long service life, as well as the ability to withstand heavy loads and a surface that prevents slipping.

By production of details of a track heat-resistant types of plastic are used. Thus, the appearance and practicality of the elements of the path are not affected by both severe frost and strong heating from the sun's rays. Another question is, on winter period it just doesn't make sense to leave the track on the site. After all, it is quite simple to assemble and understand. When assembled, the track elements take up little space and can be stored in outbuildings.

And also manufacturers offer several options for the size of the tiles. Most elements have special holes that do not allow water to accumulate on their surface. This version of the track is convenient if it is not possible to lay a track with a base, it is also good to use it as auxiliary passages.

This type of garden cover is an innovation in garden design. It is used both for forming tracks and as floor covering in certain areas of the site. The material is expensive, so before buying it is worthwhile to think carefully about the location and calculate the area for which laying is planned. Looks great on the terrace, balcony, area around the pool or playground. This coating is mounted on a prepared "pillow" of gravel or fine gravel.

The wood that is used for the production of such a coating is well processed and impregnated. Garden parquet is not susceptible to harmful effects environment. So, you can be sure that the coating will not burn out under the influence of bright sunlight, will not swell from excess moisture, the structure of the parquet will not fall apart under the influence of severe frosts. Except wooden material, plastic is often used that mimics the structure and pattern of wood. Such parquet is less expensive, but also less practical. The service life of plastic counterparts is much less.

The arrangement of garden paths is an important point in organizing the space of the site. Which requires a lot of time and cost. It is important not only to determine the location of the tracks, but also to choose the most suitable material. In this process, it is worth not only taking into account personal preferences, but also visually imagining the appearance of the finished track and its compliance with the general style of the site.

In order to make a garden path with your own hands, knowledge of special technologies is not required. For each owner of a summer cottage, this process will be easy to master. The main thing is to adhere to certain rules and strictly follow the tips described above. equipping country path, you can show imagination and originality. This can manifest itself in the play with colors, shapes, relief and structure of the track. This article provides examples of the main paths for giving with your own hands. But, remember that any option can be adapted specifically for your site. So, by combining natural materials or playing on their contrasts, you can create a unique track.

Paths should be in every garden. Their presence makes it easy to navigate and move freely around the territory. Make garden paths with your own hands, with minimal cost, will not be difficult. Instructions, photos and videos of this article will help to realize your ideas. See how many ideas and a variety of inexpensive, improvised materials exist on this topic.

Do-it-yourself concrete paths in the country

Concrete is most often used for arranging paths and paving around the house. This traditional material is available and cheap. With your own hands, classic cast tracks from it, anyone can make.

1. Start by marking the boundaries. Mark the outline with wire or fishing line tied to stakes driven in at the corners.

2. Within the indicated boundaries, make a trench 25-30 cm deep, with a slope of 3-4% in the transverse direction from the axis of the track or in both directions.

3. Level the bottom of the trench and lay it with a bearing layer of gravel. Pour a 5 cm layer of sand over it. Compact each layer with a rammer.

4. Prepare the formwork, for which, around the perimeter, install a frame made of metal or lumber. Good for this purpose edged board section 25*150*6 mm.

5. Reinforce the body of the future track, use a chain-link mesh or other metal elements (pieces of wire, old water pipes) for this.

6. Insert dividing partitions into the formwork, or special cellular forms treated with a protective solution. This will save the concrete from cracking when it dries and give the path a decorative relief.

7. Prepare the solution:

  • cement (not lower than M 500) - 4 kg;
  • sand - 6 kg;
  • gravel - 13 kg;
  • water - 1.9 l.

You should get a plastic semi-liquid consistency. It is desirable to add a plasticizer and a concrete hardening accelerator. To give the mixture the desired color (brick, stone), experiment with the color scheme.

8. Pour concrete into the formwork trough flush with the edge. Spread evenly with a spatula, making vibrating movements. Pierce (pierce) the mixture with a metal rod (reinforcement) to make it uniform.

Advice! To improve adhesion to the base, lay the solution on wet sand, crushed stone, gravel.

9. Finally level the surface of the filled track with a rule. The procedure for filling and forming the body of the track, perform sequentially. Go from one dividing rail to another, from one loading form to another, gradually.

10. Cover the lane with polyethylene to prevent the mortar from drying out quickly. Concrete gains strength for 3-4 days, during which moisten it with water. This will prevent cracking and give concrete additional strength.

To achieve an even greater decorative effect, various components are “embedded” into the surface that has not fully set: pebbles, colored glass, shell rock. The relief of the track is given by various strokes, furrows, prints. And to imitate antiquity, as if the path was overgrown with moss, kefir or milk is introduced into the solution.

Garden paths made of bricks and paving stones - scheme, layers, execution

durable and inexpensive material for the manufacture of garden coatings - facing bricks or paving stones. This material is resistant to frost and abrasion. Brick is less durable due to greater porosity. However, he has decorative look and is available in several shapes and colors. In addition to the natural dark red color, there is brown, red, brown, anthracite, White color. The brick path can be easily laid in the form of an arc, or herringbone, which greatly improves the spatial perception of the site.

Advice! When laying paving stones, keep in mind that for paving walking paths or terraces better fit paving stones ~ 4 cm thick. And on paths with intense loads, use cubes ~ 6 cm thick.

Pavement paving stone

Start by removing the topsoil to a depth that allows you to lay all the layers of the path so that the last layer of paving stones is level with the ground. More often, this depth is 20-40 cm.

Important! The base for paving stones is the basis for proper installation. This is the layer responsible for the uniform transfer of load from the surface of the pavers to the ground. It also acts as a drainage layer that protects against the effects of precipitation and negative temperatures.

Making a base for paving stones - 3 important rules

In order for the base under the paving stones to perform its function properly, for a long time, its design and manufacture takes place according to the rules.

1. The thickness of the base layer. It's about about the correct ratio of the thickness of the base layer for the planned load of the surface of the pavers. On the paths, a base 10-20 cm thick is more often used. In the case of pavements on which heavy traffic is planned, the base is increased to 25-40 cm.

2. Foundation material. The base under the pavers must be permeable to water, quickly pass it through itself to drain into the ground. For the manufacture of a drainage layer of the base, use: gravel, crushed stone, slag, or a mixture of sand and gravel.

3. Laying layers of the base. To ensure uniform laying and compaction of the base under the paving stones, lay the material in layers of 10 cm thick. Be sure to compact each layer, this will prevent possible subsidence in the future.

Attention! If the soil below the base has low water permeability, an additional drainage layer of geotextile may be required.

Making a sand "cushion"

Create a frame for the future track, according to the type of formwork. In the resulting trough, make a sand dump. Its task is to introduce and fix individual structural elements. Layer thickness ~ 3-5 cm. For greater strength, sand is mixed with dry concrete in a ratio of 3: 1. However, this kind of material makes it difficult later repair work. Level the scree wooden lath. Soak a layer of sand until a liquid "slurry" is formed.

Laying brick pavement

The procedure is to place one element after another, in the direction "away from you". At the same time, light tapping on the upper part of the brick / stone with a rubber mallet or mallet allows you to plant the elements in a sandy base.

Surface fixing

The final stage of work consists in sprinkling the working surface with quartz sand, which fills the gaps between the cubes, bursts and gives solidity to the structure. The action is repeated several times. In between, the sand is abundantly wetted with water, swells. The excess is squeezed out, dried and removed with a whisk. A dense, cemented packing remains between the bricks.

Stone garden paths

Paths made of wild stone are durable and elegant. Their natural texture and various shades of color are perfect for any environment, look good in combination with other materials.

The most commonly used granite flagstone. It is a hard and very durable material. He is not harmed by water and frost. Popular colors are gray, red, pink-red granite is beautiful. Similar properties have basalt (black), porphyry (gray-red-brown stone), syenite (gray, almost black), as well as: travertine, gabbro, diabase. Sandstone or slate looks attractive in different variations.

In the garden among the greenery, informal paths made of mosaic-laid stone slabs look great. In the intervals between them, grass or undersized, creeping plants are sown, for example: alissum, iberis, stonecrop.

The method of laying stone material is similar to that described above and depends on the location, purpose of the path and the permeability of the soil under it. On drained lands, with a low operational load, stone garden paths are laid on a 5-10 cm mortar layer of sand or gravel / crushed stone, cement, in a ratio of 1:12.

However, there are a number of problems associated with the use of a field stone:

1. Irregular natural forms. Stones are difficult to pick up, link together. Creating a perfectly flat plane is also problematic. This makes it difficult to move on them, for example, garden equipment.

2. The stone draws moisture from the ground. Therefore, it is often overgrown with moss and lichen. Easily exposed to dirt that is difficult to remove. To prevent this wild stone, at least once every 3 years, treated with a composition based on silicone or resins (Dynasil, Lithofin). These products form a protective layer without creating a slippery surface. At the same time, they clog pores and give the effect of a “wet stone” without changing its natural color.

Garden paths from paving slabs

The functional coating of this material is unparalleled. The price of the material is not fabulous, and laying tiles with your own hands is easy to perform.

There are antique-styled tiles imitating stone pavement and cut granite or raw sandstone. There are high-strength clinker tiles obtained by single firing. Colored and textured concrete are used to make elements that resemble boards, wooden sidewalks, or old railway sleepers.

In the collections of trading companies there are elements of different thicknesses and shapes: square and rectangular. Thin 3-5 cm, used for paving decorative paths, thicker tiles - for facing the entrance.

Do-it-yourself paving slabs have become popular. Suitable molds for making castings can be bought everywhere today. They are made of high-quality, durable plastic, laminate, and wooden ones are also found. Designed for repeated use. The sizes, a design, forms, the price are various. The surface of the casting can be smooth or patterned.

The preparation of the filler solution is carried out according to the technology described above.

Paving slabs are quite heavy, so they need a solid foundation. It is recommended to do two layers:

  • leveling layer (sand, crushed stone, 10-15 cm);
  • retaining layer (a mixture of sand and cement, 3-4 cm).

The thicker the frame layer, the more stable the coating - the plates will not move!

Care should be taken when cleaning tiles in winter - it is better not to beat off the ice with sharp tools, the outer layer is damaged.

Wooden garden paths - ideas, implementation

Wooden paths in the garden are not as resistant to weather conditions as stone or concrete, but they always attract attention with their naturalness, environmental friendliness and high decorative aesthetics.

Do-it-yourself garden paths from saw cuts of a tree

The path lined with wooden round logs looks original. best tree for this work - oak or larch. Their solid and weather-resistant structure, "survives" for more than a dozen years. It remains unchanged without impregnation, due to the large amount of tannins. Pine and spruce, unfortunately, are less durable.

1. Cutting wood. From the trunks and branches of an old tree, cut fragments with a diameter of 10-40 cm and a height of 15-25 cm. The optimal ratio of large blanks (25-40 cm) to small ones (10-15 cm) should be 3:1. Since the saw cuts are round and form large spaces between them, different cutting diameters complement each other during subsequent laying.

2. Remove the bark and dry the blanks for several days in the sun.

3. To protect the wood, be sure to impregnate the saw cuts with an antiseptic primer to a depth of 3-4 cm.

4. After the impregnation has dried (24 hours), it is advisable to apply a coat of varnish for outdoor use.

5. Installation. Remove the soil to a depth of 5 cm. Fill with sand. You can make a 4 cm cement screed. When tying the track, alternate the combination of three large and one small die. Between them, a perfect pattern is obtained, practically without a gap. Free space between saw cuts, we fall asleep with fine sand. After a while, it will only be necessary to replenish its natural decline.

Adviсe.
Do not place slices close to each other. Over time, the wood swells, the track elements are squeezed out.
It is better to have wooden walkways in sunny, ventilated places. In the shade, wood absorbs and retains moisture, as a result of which it undergoes biological corrosion. Remember, wet wood is slippery!
To increase the durability of a wooden walkway, place a 20-30 cm thick layer of crushed stone drainage under the surface.

With proper operation, the service life of such a track will be 10 years.

Tree bark garden paths

It's cheap and eco-friendly material. Bark paths arranged among flowers and ornamental shrubs, provide them with nutrients and protect the soil from freezing. The best, such paths are in places where there are plants that prefer acidic soil (heather, rhododendron, hydrangea, erica). Path preparation is not difficult. It is enough to make a pit, and fill the bottom with a layer of sand (10-15 cm), then put 8-10 cm of bark on it.

Advice! The bark naturally decomposes. Once a season, the path from it requires additional backfilling.

Railroad sleeper track

Railway sleepers are a durable material, but difficult to access. You can make paths from them, laying them flat, tightly with each other or positioning them freely, and fill the voids, for example, with gravel.

Important! Remember, paths should not run too close to trees, especially those with shallow root systems. Growing over time, it can break the surface of the track.

Do-it-yourself garden paths from car tires

We are all car enthusiasts. Using old car rubber in this case, ideal a budget option in the manufacture of garden paths. It is the tire that is designed to experience the maximum load.

Constructions from it are obtained:

  • reinforced;
  • resistant to temperature extremes;
  • not slippery;
  • not absorbing moisture;
  • not soaking;
  • easy care;
  • easy to manufacture.

The process is as follows:

1. Using a knife, separate the tire track from the side part. To make it easier for the knife to penetrate thick rubber, treat the blade with machine oil or soap from time to time.
2. Cut the resulting rings into ribbons. Three to four such tapes may be required to make a garden path.
3. Trim the strips to length and nail them to a wooden board or beam, next to each other.
4. Press the structure into the ground along the perimeter.

Not only the beauty of the estate and comfortable movement around the site, but also all economic activities on the territory of your possession depend on how the paths and transport passages are laid and interconnected.

There are no universal "recipes" for tracing tracks, just as there are no absolutely identical sections.

The scheme of the road network depends on the area, shape, topography of the site and the type of building.

The rational placement of paths and driveways is determined at the site planning stage, and then adjusted as each new building is erected.

Garden paths are also summer communication

The path leading to the main entrance and the entrance for the car are usually not laid along the shortest path. Such a solution is justified for short distances and routes laid along the edge of the site (for example, from the back door of the house to the barn). In other cases, straight as an arrow, the road gives the impression of being taut and dominant. To avoid this effect, it is better to soften the outlines, giving them a soft wavy shape.

In small areas, it is better to refuse strict straight paths altogether. Even a slight bend will visually increase the area of ​​your possessions. The boundaries of the narrow allotment will be moved apart by walking paths located diagonally or with soft turns.

Avoid excessively winding paths, especially on the way to outbuildings. Unjustified turns cause legitimate annoyance. In this case, most people will not follow the path, but simply take a short cut.

What width to make garden paths in the country?

After the routes are outlined, the width of each track is determined.

Trails of secondary importance - to booms, outbuildings, etc. are narrower, 60-90 cm. At the same time, the width of the path should be 40 cm higher than the gauge of the garden cart for transporting goods. Width 30-50 cm - for paths in the "wild" corners of the garden and garden.

Remember that narrow paths cannot be framed with lush flower beds (see article), it is better to limit yourself to a lawn on one side.

Endure garden-style walkways!

The configuration of the paths should match the overall style of the garden.

The landscape garden requires smoothly turning and intricately “snaking” paths, irregularly spreading areas.

Paths along the entire length are made of the same width or on the approaches to platforms, stairs, buildings they are gradually expanded. Tracks in soda of regular construction are laid exclusively “along the line”.

Road tapes in this case run parallel and perpendicular to each other, the fence and the walls of buildings. They also use ray and circular schemes, symmetry.

Proper garden paths in the country and their configuration:

  • economically consumes the land (every extra 10 cm of the width of the path “eats up” the useful area of ​​​​the garden and vegetable garden);
  • provides the shortest connections between different parts of the garden and outbuildings;
  • allows you to easily care for plants;
  • will give you the opportunity to admire your garden and flower beds from the most advantageous angle.

Expand narrow and reduce area

Paths from the bark

Cutting down old trees and shrubs, pruning overgrowth and removing lignified shoots provide a constant supply of material for paths.

Garden shredders vegetable waste give branches a second life. Chopped woody small things are commonly used as mulching material, but they are also great for backfilling paths. So that the cuttings of branches do not “scatter” across the lawn, where they can fall under the knives of the lawn mower, 15 cm of soil is removed for the path. The bed is covered with crushed wood mass, not reaching the edge of 2-3 cm.

Such a coating is hard enough to withstand a garden wheelbarrow with a load and even rolled well rings and concrete pipes. But barefoot walking on the branches is a hard foot massage with the risk of injury. To transform the temporary hut into a permanent path, they dig a trench 20 cm deep, while the temporary backfill is removed along with part of the fertile soil under it.

Light paths from waste

In order to wear country cottage area was convenient for life and recreation, we need not only beautiful lawns, but also comfortable paved paths and playgrounds

The network of paths connecting the various buildings on the site should be planned in such a way that it is convenient for us to move around the site without stumbling, soiling our shoes and trampling the lawn. Yes, and the choice of materials for paving paths, driveways and functional areas of the yard must be approached with all responsibility.

They must be durable, moisture and frost resistant, non-slip and unpretentious in care.

stone pavement

The traditional material for paving paths is, of course, stone. Natural stone always looks great in any area - whether it's a patio or a path in a regular garden.

For paving, stone of very different textures can be used - chopped and sawn, paving stones and flagstone, as well as their combinations. Chipped paving stones look very impressive. But walking on it is inconvenient, and for gardening equipment it is a serious obstacle. Therefore, it is better to lay out pedestrian zones, and even more so access roads, with paving stones with a flat surface or flagstone, and use crushed stone and cobblestones as decorative inclusions in those places that can be easily bypassed.

Miracle ceramics

One of the oldest, time-tested materials for paving paths is clinker brick. It differs from ordinary brick not only in a more attractive appearance, but also in a smaller thickness, but at the same time with exceptional strength, moisture resistance and durability. Yes, and it does not care about severe frosts. Clinker also perfectly resists mechanical influences, including significant shock loads. Clinker paving stones can be used in places with heavy load on pavement- for example, at the entrance to the site, in front of the garage. The clinker coating looks very nice both in front of the house and, of course, in the garden. The only drawback of clinker is its high price.

decorative concrete

The most popular among the owners of suburban areas are paving stones and paving slabs made of concrete. This is facilitated by their low price compared to natural stone. But besides the price, concrete pavers have other advantages. Firstly, this material allows you to reproduce any texture, pattern and color.

Secondly, the existing systematization of geometric shapes and linear dimensions of concrete paving stones and paving slabs makes it easy to combine with each other, but with their various types.

According to the production technology, concrete slabs are divided into vibropressed and vibrocast. On driveways, it is better to use vibro-cast tiles that are durable and resistant to high loads, and on walking paths - slightly less durable, but more decorative vibro-pressed tiles.

Terrace floor

The choice of flooring for open terraces and entrance groups must also be approached responsibly. After all, it must withstand changes in temperature and humidity, frost and sun, be non-slip, wear-resistant and, of course, beautiful. The ideal material for facing the steps and the floor of the porch and terrace is clinker tiles. In addition to extraordinary strength, water resistance and frost resistance, it also has a beautiful appearance.

An excellent alternative to clinker tiles when laying flooring on the terrace and porch is porcelain stoneware.

The material combines high strength with exceptionally low porosity, frost resistance with inertness to chemical attack. As for the service life, there is no demolition at all for porcelain stoneware. In terms of abrasion resistance and hardness, it is on a par with quarry granite, quartz and even corundum.

A very practical solution for terraces is the use of composite decking. The composite, consisting of wood flour and polymer binders, allows you to create a strong, durable and lightweight material that has all the advantages of natural wood, but at the same time devoid of its disadvantages. Polymer decking does not collapse under the influence of moisture, does not fade in the sun, has high mechanical strength and resistance to temperature extremes.

: How to make a discount along the lawn ...: A path on the lawn in the country ...

  • : All-season flower gardenAdvise how to create a spectacular ...
  • : How to make a flower garden with roses...
    • Stylish and comfortable paths in the garden with your own hands

    Paths are an integral part of the garden. Not only the appearance of the estate, but also the convenience of movement throughout the site depends on how they are laid and combined with each other. Therefore, the arrangement of paths and paths is the main stage in the design of the landscape gardening area.

    How to plan a track layout

    It is best to plan the layout of the tracks during the planning and zoning of the site. This will make it possible to provide approaches to all necessary buildings and zones.

    If necessary, in the future, after the appearance of a new building, or a change in layout, you can always correct the route or change direction. The marking should be carried out taking into account all routes, so that a convenient passage is provided to each important element of the garden.

    To begin with, you should draw up a site plan and think over all possible objects, including both communication and architectural or design ones. After marking all the routes, it is necessary to determine the width of the track, taking into account what exactly it will be used for.

    • The main path - going from the gate to the house and to the most visited places, for example, a gazebo or a playground, should be 0.9-1.5 m wide. This is necessary not only for the possibility of the passage of two people, but also helps to highlight it visually.
    • Paths of secondary importance (to utility rooms, a bathhouse, outbuildings, recreation areas) - from 60 to 90 cm.
    • For paths going deep into the garden or vegetable garden, a width of 35-50 cm is suitable.

    The exact width of the tracks is not given, as it depends on the size of the site and on personal preferences. However, for a large section, it is recommended that each branch of the road be twice as narrow as the previous one. For example, the main one is 1.2 m, then the secondary one is 60 cm, and the garden one is 30-35.

    It is equally important that the paths fit perfectly into the overall style of the site. For a landscape-style garden, serpentine paths with gentle turns are best suited. Their width is made the same, and on the steps to the sites or buildings they are gradually expanded.

    Landscape style garden design or English garden. Also called Nature Style or Natural Garden, contains irregular and uneven shapes, mixed landings and planting areas.

    In a garden of regular construction, paths are lined exclusively in a straight line, so that they are parallel and perpendicular to each other, fences and walls of the house. A ray scheme or symmetry is also suitable for this style.

    For the reader's reference

    Landscape style A regular garden is the exact opposite of a landscape style. It may also have the names French Park, Geometric Garden, Garden of regular or geometric construction. Differs in the correct equal forms and symmetry of execution. It is considered the most strict and light style in landscape design.

    Materials for paving paths in the garden

    When choosing which paths to make in the garden with your own hands, it is important to consider the basic requirements: strength, safety and affordability. What is the best way to make them? And how to determine the required amount of materials?

    The most popular are:

    • paving slabs;
    • a natural stone;
    • granite chips;
    • paving stones;
    • pebbles;
    • stamped concrete;
    • concrete plates;
    • bars and saw cuts of trees;
    • terrace board.

    Choosing building materials for paving should be based on the purpose of the paths and sites. On the main routes, especially if the house is permanently occupied, a continuous hard surface of concrete, tile or stone is laid. For backfilling the central paths, as well as for paving routes of secondary importance, brick chips, gravel or pebbles are used.

    The central paths and porches are paved with the same type of material to give the entire space a stylistic unity. If the area of ​​​​the site is large, you can combine several types of coatings, but no more than 2-3. For laying serpentine paths, it is better to choose elements of medium size - paving stones, clinker, paving slabs.

    Before laying the coating, it is necessary to make the base of the track. To do this, they dig a trench, having previously calculated its depth according to the formula: the height of the base layer plus the height of the surface coating. Usually, a 30 cm layer of fine-grained sand and gravel, or crushed stone, is used to create the base. In this case, the sand component should not be more than 50%. The base is laid out in 4-5, approximately equal layers, each one is carefully spilled with water for precipitation and compacted.

    Determination of the amount of facing material

    In order to determine how much material is required to paving the surface layer of the path, it is necessary to determine the length and width of the future garden path, and then, by multiplying, calculate it total area. For example, for the construction of a path measuring 1.2 by 7 m, about 63 tons will be required. decorative gravel.

    This calculation is based on the following data:

    • According to the data from the example, we get the coverage area: 1.2 * 7 \u003d 8.4 square meters;
    • For a stable coating, according to the norms, it is customary to take a height of 5 cm;
    • The coverage volume is equal to the coverage area multiplied by the height: 8.4 * 5 = 42 cubic meters;
    • The bulk weight of decorative crushed stone can be obtained from the manufacturer, on average it is one and a half tons per cubic meter;
    • Based on these data, we expect that our track will need 63 tons (42 * 1.5).

    You can calculate the amount of sand and gravel for the base approximately, according to the same principle. The bulk weight of fine-grained sand is 1.72-1.8 tons per cubic meter, and fine-grained crushed stone of the M700-M800 brand is 1.41 tons.

    Paths in the garden of stone, tiles and bricks: design options

    Slab is the most popular material for organizing tracks. Firstly, it is easy to lay out, secondly, it is durable and wear-resistant, and thirdly, it is quite easy to care for it.

    The modern building materials market allows you to choose paving slabs for every taste - all kinds of shapes, colors and textures. To decorate the area large sizes- parking or a platform near the porch, it is enough to combine 2-3 options by organizing inserts on the main canvas with a diagonal or patterned placement of tiles.

    A mosaic or abstract patterns of multi-colored tiles of various sizes will look very unusual and festive. For connoisseurs natural style an excellent solution would be tiles with gaps, which, after laying, can be sown with grass or covered with soil.

    Do-it-yourself garden paths made of natural stone

    Natural materials - basalt, granite, limestone, sandstone allow you to realize the most daring fantasies. With their help, you can make a path of any purpose a real artistic element of the garden. The main advantage of such a coating is harmony and strength. Pave paths from natural stone not difficult, even for a non-professional.

    For the construction of walking paths, it is most rational to use full-sawn paving stones - stone blocks that resemble a parallelepiped in shape. And access roads should be paved with chipped paving stones. Irregular flagstone paving, 4 cm thick, looks no less beautiful. It must be selected according to the shape, and laid on a bed of compacted sand or on a sand-cement mixture.

    To save money

    To save money, you can combine paving slabs, filling the main part of the paving with it, and make stone patterns in the center. For this purpose, a stone of any size left over from construction, boulders of an unusual shape, pebbles and shells brought from a trip are suitable. Brick chips, pieces of marble, granite, and even wooden saw cuts are also useful.

    Walking paths in the garden, photo of original coatings using wood

    Wood is not the most durable material, but wooden paths look very aesthetically pleasing and original. To ensure that the coating lasts as long as possible, it is treated with special impregnations before laying that protect against moisture and fungi: Drevotex-Anti-mold, Dali, Woodmaster Prof Biosept, Ecodom Bioprof. Such paths are installed only on elevated places where there is no possibility of waterlogging of the soil and stagnant water.

    Walking paths leading into the distance of the garden are made of wooden saw cuts with a diameter of 20 cm or a rectangular beam 20x15 cm. suitable material for saw cuts, wood of aspen, oak or alder is considered, and for the manufacture of timber - spruce, pine and some types of larch. The finished bars are laid out on a pillow of sand, covered with gravel on top. The saw cuts are driven into compacted wet sand, as close as possible to each other.

    The most durable material for garden paths

    More durable and durable paths made of decking boards. It is made of wood or wood-polymer material that is not subject to the damaging effects of weather conditions. Mount the coating on logs laid on a leveled surface. Fasten the boards to each other with screws or clips.

    Logs are selected based on the selected terrace board. If wood-polymer materials are used, the logs should also be made of composite materials, since the service life of the parts of the structure must match. The surface under the logs can be made of various materials: paving stones, crushed stone and sand, sand or concrete. The main condition is a prepared flat surface, with a slight slope (1.5-2%) from the house for water flow.

    Logs are laid at a distance of 40-50 cm, and in places of increased load 20-30 cm. Also, they should not be laid close to curbs and walls, the recommended distance is more than 20 mm. After that, the deck board is fixed. If completely natural materials are used, mandatory treatment with special oils that prevent decay is necessary.

    Outcome

    A beautifully laid out central path or an originally decorated winding path leading from home to your favorite vacation spot, pond or garden can not only emphasize the merits of plant compositions, but also become a spectacular garden decoration. Using the advice of our experts, you will make beautiful and comfortable paths in the garden with your own hands.

    In this article, we will offer several original ideas for arranging original, beautiful and at the same time inexpensive and comfortable garden paths with your own hands, which will become one of the decorations of your adjoining plot or cottage.

    1. Gravel, just gravel

    Let's start with one of the simplest and least expensive ideas - creating gravel garden paths. The advantages of this option include a wide selection of fractions and shades, as well as the ability to get by with a minimum of cost and effort.

    In the case of arranging such a path, you will have to take care of the presence of a curb or other limiter so that the gravel remains within the boundaries of the path

    In this case, a fairly large area was covered with gravel between neat flower beds, where not flowers, but vegetables grow.

    2. Large stones or slabs on gravel

    Somewhat more expensive, but also more comfortable and original version- lay out a path of flat stones or concrete slabs, and fill the space between them with the same gravel.

    Large slabs of stone or concrete will become the basis of the path, and so that grass does not break through between them and the path looks more attractive, the space is covered with inexpensive gravel

    Stone slabs on gravel can be scattered in any, the most chaotic order - this way the path will look even more unusual

    3. Stones and lawn

    If you have nothing against green grass, let the lawn grow freely between the flagstones of the path. This combination of greenery and stone will look very natural and harmonious in the garden.

    Stone slabs literally "grow" into the green lawn, becoming an integral part of the garden

    Why destroy the lawn, if you can create just such a beautiful path, walking along which will be no less convenient than along ordinary paths completely tiled

    One can confidently say about such a path of massive stone slabs - “made for centuries”. And the moss growing between the slabs gives it a natural look, as if the path appeared by itself.

    4. One board, two boards

    The result may not be a ladder at all, but a comfortable garden path. Just do not forget to process the wood, which will have to withstand moisture and temperature changes.

    It is not necessary to use fairly expensive ready-made boards; you can purchase ordinary pallets that are quite inexpensive. It remains only to disassemble them, process the resulting boards with a special composition and lay out the track

    Another plus of such a garden path is that if necessary, it will not be difficult to replace one of the boards.

    5. Boards and gravel

    From wooden planks it is not at all necessary to lay out a continuous flooring. You can use gravel and create a harmonious combination of stone and natural wood.

    Gravel between the boards can be poured in different ways - large, medium, small, it all depends on your desire

    By the way, with the help of boards and gravel, you can also create stepped paths in areas with uneven terrain.

    6. Pebble

    An ideal option for those who want to transfer a piece of the sea beach to their garden is pebbles. You can lay out unusual compositions from it or just fill up the track, be sure to take care of the limiters.

    Highly beautiful option pebble paths. Children will especially enjoy jumping from one laid out piece to another - a real playground

    It will be nice to walk along such a path barefoot, imagining yourself on a pebble beach somewhere on the Black Sea coast

    7. Wooden cuts

    If the boards seem too banal to you, or you just recently got rid of a large tree that cluttered up the site, you can use wooden saw cuts to create a garden path. The beauty of natural wood does not need additional decorations, but it will have to be protected from external influences.

    Wooden saw cuts can be of different sizes - this combination will look just as good.

    Of course, finding large wooden saw cuts will not be easy. However, smaller rounds can also be laid out in this way - on top of each other, in steps

    8. Boards and grass

    As with stone slabs, green grass can be allowed to grow between planks. Experts note that boards lying on gravel last longer, but your garden will look like a corner of almost untouched nature with lots of greenery.

    Old boards on a green lawn are both a retro option and a very natural part of a garden that has retained its natural charm

    9. Stone mosaic

    This option for arranging a garden path will require a lot of time and effort, but the result will be so beautiful, durable and original that it will pay off all the efforts.

    From pebbles, large and small stones, you can create amazing garden paths, real mosaic panels

    Such a mosaic is laid out on concrete or sand. If you decide to lay the stones on the sand, you can additionally fix them with wood glue so that the paths last long enough

    The process of laying out such a stone mosaic is very painstaking, it requires attention to each pebble.

    10. Mosaic from broken ceramic tiles

    Everyone who has ever made repairs using ceramic tiles will definitely have unclaimed pieces. Do not rush to throw them away - with the help of a bat or tile cut into pieces, you can create a beautiful and reliable garden path.

    From pieces of a wide variety of broken tiles, you can create garden paths that will definitely be one of a kind

    From small pieces of tiles, you can create small separate panels

    11. Plastic lids

    Highly interesting option arrangement of garden paths. The more plastic covers you have in different colors, the more beautiful and brighter your garden path will turn out.

    Plastic is not afraid of moisture and temperature changes, so such covers can be called unusual, but quite suitable option to create garden paths

    The only thing that can delay the implementation of such a project is the need to collect a sufficiently large number of plastic caps. Although, if you turn to friends, acquaintances and neighbors for help, it will not be difficult to cope with this task.

    12. "Vegetable" concrete slabs

    Concrete is a truly versatile material from which you can make amazingly beautiful things. To create a garden path from unusual concrete slabs, you only need cement mortar and an ordinary large burdock, which you will definitely find without any problems under the nearest fence.

    It turns out that even a child can make such a garden path! So you can definitely do it

    These are the concrete mugs you should get in the end

    13. Mold for casting

    Special forms for creating concrete garden paths can now be purchased at many hardware stores. With their help, you can arrange comfortable paths throughout the garden or house adjoining area with your own hands.

    The appearance of your garden path will depend on the chosen form.

    You can add color to the solution and your track will sparkle with all the colors of the rainbow

    14. Terrace board

    Of course, this option can no longer be called cheap, because a ready-made terrace board is very expensive. However, such a track will look not only beautiful, but also respectable, and will last for many years without losing its original parameters.

    A deck or deck board walkway is one of the most expensive options.

    A deck board made of larch will cost less depending on the type of material

    15. Brick

    Remember the girl Ellie, who walked with her friends to Goodwin along the yellow brick path? Why not bring such a fabulous path into your garden by creating a solid and beautiful brick path with your own hands.

    You can choose a brick for the path in a different shade, and the process of laying it is similar to paving slabs

    The most economical option is to create a garden path from the old brick left after dismantling the outbuilding

    16. Paving slabs

    It seems that there is nothing original in this idea. Indeed, at present, paving slabs have become one of the most popular options for arranging garden paths. But tiles are different! The diversity that exists today allows you to create original patterns from paving slabs and turn garden paths into a masterpiece of landscape design.

    And in this case, the path of paving slabs is surrounded by areas covered with gravel

    As you can see, there are many options for arranging garden paths, and you can choose very inexpensive, if not free, options that involve the use of such “improvised” materials as wooden cuts, old bricks and plastic covers. Choose the idea that you like, implement your options and let your paths on the site be the most beautiful!