Porch 

Installing verso. Ventilation devices VERSO. Description of the data transfer process

Modern technologies provide a person with a lot of opportunities to create a comfortable environment not only at home, but also in places of leisure or in the workplace. However, all the efforts of designers may be in vain if the microclimate of the room is not comfortable for those in it. To avoid such annoying mistakes, you need to install air handling units.

Diversity model range HVAC equipment Komfovent Verso standard or special purpose allows you to adjust the supply of fresh air in the mode you need - supply clean air, heating it to the desired temperature, humidifying or dehumidifying. Ventilation units for industrial use they process air masses of much larger volumes, removing air polluted by industrial dust or gases from the premises and replacing it with clean air.

Each Verso ventilation unit differs in optimum parameters of work and is delivered in complete form. The dimensions of the equipment allow you to easily carry it through doorways and use it immediately after installation.

The advantages of using climate equipment of this trademark obvious:

  • reducing the cost of heating a room, regardless of its area;
  • long service life;
  • increasing the productivity of production workers in comfortable conditions;
  • increase in buyers and visitors of commercial structures.

Considering the benefits and specifications of each model, it should be noted that the housings of the R, P and CF series units are distinguished by excellent soundproofing qualities and, in combination with low-noise fans, make the operation of the unit almost silent. Series unit designs Verso R equipped with a rotary heat exchanger and have a capacity of 240 to 8000 m3/h.

In installations Verso R a plate heat exchanger was installed, which ensures efficient heat exchange due to the separation of air flows.

Models Verso RHP, except for rotary heat exchangers, are also equipped with a heat pump. This solution makes it possible to achieve high application efficiency, which is confirmed by a capacity of up to 1500 m3/h.

Series systems Verso CF with a counterflow plate heat exchanger have a capacity of up to 3500 mm3/h.

Despite the fact that Air handling units Verso S have absolutely small size, it is the most efficient unit with an air capacity of up to 4000 m3/h. Its design ensures easy installation and simple maintenance.

For the convenience of users, all series are equipped with modern consoles, which display detailed information about the operation of the system and it is possible to select the optimal operating mode. Also, the equipment has advanced features in the form of remote control.

Modern automation system installed on ventilation systems, increases economy and speed of each executed process. It allows you to provide for the operation of equipment in different modes, to support set temperature, prevent freezing of the air heater and much more.

At Panoramavent you can find not only the necessary brand HVAC equipment Komfovent, but also to make a purchase on attractive terms. Our experts will help you choose the appropriate size of the installations, taking into account the requirements of the customer and the parameters of the room. Buy air handling units Komfovent Verso we have - simple, profitable and reliable!

Price: 650,000 rubles including VAT

650000 RUB

Ventilation units KOMFOVENT VERSO R represents a wide range of standard ventilation units with a rotary heat exchanger. Installation data...


Ventilation units KOMFOVENT VERSO R represents a wide range of standard ventilation units with a rotary heat exchanger. These units are equipped with high efficiency EC type fans. All equipment of the VERSO R series is equipped with built-in C5.1 automatic control, and the client receives an air handling unit with a fully configured and integrated automation control inside the unit, as well as an external modern wall panel. The air capacity of VERSO Standaet R series ventilation units is from 1000 to 7000 m³/h.

Contemporary digital control settings allows the user to independently quickly and easily select and change the desired functions, control the parameters of the ventilation device directly from the control panel.

VERSO R series ventilation units with heat recovery, characterized by compact dimensions and a wide range of functions, provide comfortable conditions in residential, public and industrial premises. In the production of ventilation devices of the VERSO R series, original designs, best materials and Newest technologies, so this series of equipment is economical, safe, durable and trustworthy.

The Verso-S-2100-F-HW unit is a monoblock structure inside which there is a fan, heater and filter. Supply units are ideal for a private house apartment and office.

The Verso-S-2100-F-HW units are distinguished not only by optimal operating parameters, but also by compact dimensions. The design features of the supply units allow you to place the equipment under false ceiling or on the balcony of the apartment, in size they do not exceed the size of a standard doorway.

All standard units in the Verso series are based on the “Plug and Play” principle: each unit has integrated control automation and is delivered fully equipped. Verso units can be quickly delivered to the customer in the shortest possible time, as they are always available from stock.

Verso units have a wide range of options, the customer can choose desired setting using software. For the convenience of the customer, air heaters, air coolers and dampers are installed on the outside of the unit - as separate sections, so the assembly of the device is greatly simplified, and the usable area is saved at the installation site of the device. Verso ventilation units can be installed both indoors and outdoors. The units are manufactured with fully integrated control automation. The capacity of the units ranges from 1000 m³/h to 34000 m³/h.

Design feature

EU/AU fan:

  • EC motor efficiency is 92%;
  • energy consumption of EC motors is 30% less than that of AC motors; silent operation;
  • smooth control function;
  • safety class - IP55 (partial protection against dust, protection against water jets);
  • dimensions and weight of EC motors are smaller than those of AC motors;
  • the EC fan is directly connected to the electric motor, which ensures the durability of its operation;
  • there is no need to control the tension and periodically replace the belts;
  • uniform flow in the air duct behind the fan reduces pressure losses in the network; the ability to connect a device for measuring air flow; working temperature fan - up to 40°C.

Heat exchange devices:

  • Komfovent Verso S air handling units are equipped with an electric (HE type) or water (HW type) heater, which allows heating the supply air to a comfortable temperature;
  • a CW cooler (works on water or a water-glycol mixture) or CDX (works on the principle of direct cooling) is used to cool the supply air stream.

Original body design:

  • compact sections do not have protruding elements, which ensures ease of transportation, assembly and maintenance;
  • housing walls have excellent heat and sound insulation, as well as a high degree of fire resistance;
  • easy accessibility of all components (filter, fan, heater, cooler, etc.) simplifies maintenance during operation;
  • The housing is highly sealed thanks to an elastic seal made of durable porous rubber, which has a special profile with an air cavity.

Control system

The intelligent control system ensures the safe operation of the unit, manages the set parameters ventilation system optimizes operating costs. Two control panels that let users simply enjoy fresh air feeling of comfort and well-being.

Control of the air handling unit using C5 automation

  • Weekly programming option.
  • Control based on Android and iOS.
  • Compatibility with the Smart Home control system.
  • Remote control via web interface.
  • Regulation of functioning in 5 modes. 3-mode flow control.
  • Intelligent self-diagnosis option.
  • Humidity, temperature and air quality control.
  • Indication of energy parameters, air consumption, cleanliness of air filters.
  • Protection of the heat exchanger of the air handling unit Komfoveyn Verso P against malfunctions.
  • Inverter control of the outdoor unit.
  • Ability to control circulation pumps.
  • Warm up option circulation pumps and mixing valves.
  • Connection protocols: Modbus TCP (via Internet), BACnet/IP (via Internet), Modbus RTU (via RS-485).

Rotary heat exchanger. Efficient EC motor. Low noise operation and high performance.

Great heart for the ventilation system country house or multi-room apartment.

Description Verso R 1000 H/V E

The efficiency of a rotary heat exchanger (recuperator) can be described with a simple example: the reduction in the cost of heating the supplied air is reduced by 4 times! So calculate the savings in the context of the year of operation of the ventilation system in our latitudes. Definitely a repeater!

One of the advantages of a rotary heat exchanger is... humidification! Yes Yes. The retained moisture in the channels on the aluminum fins is transferred to the supply air, which no longer receives only heat from the exhaust air. And this is a significant factor when operating in the cold season, when indoor humidity drops to a critical 35-40%.


Benefits of the Verso R 1000 H/V E rotary heat exchanger:

  • high efficiency at the level of 80-90%!
  • no freezing even in frost - year-round operation
  • moisture regeneration (indirect moistening, return of moisture back)
  • no need to create drainage system, which slightly simplifies the choice of location and the installation of the ventilation unit itself
  • when the air conditioning system is running, it will cool the supplied air

When completing the ventilation unit, it is possible to choose both the type of the rotary heat exchanger and the material from which it will be made:

  • Optimum thermal efficiency with an L-type rotor and improved heat transfer efficiency with an XL-type rotor
  • the material also influences the transfer of moisture: only aluminum (AL) regeneration of moisture in winter period; hygroscopic and aluminum foil (AZM) is more efficient; hygroscopic aluminum foil (AZ) effectively controls humidity in both winter and summer

Design and installation of heating, ventilation and air conditioning systems is our profile. We know Komfovent equipment firsthand. And we work with it very tightly: more than a dozen (if we haven’t already switched to hundreds) of objects are made precisely on the basis of data air handling units. No worse than Salda, Systemair and other European brands.

Finally, in Russia they learned how to make ventilation units and automation for them. It is a pleasure to work with this equipment. Yes, and under the guarantee so far there were no cases. So far, the customers are happy. This is important for us: bought and sold is not ours. We design, install and maintain.