Finishing 

Beautiful beds in the country with their own hands: photo, device and options. How to make the right beds in the country with your own hands Make country beds

Do you know what an innovation is, how high beds came to our country from Canada. There, the land has been cultivated in this way for many years. Such planting options can be used not only for growing vegetables, but also for creating original ones. Let's find out how to make beautiful and practical high beds in the country with your own hands. Photos, descriptions of technological processes and diagrams will help you with this.

Do-it-yourself high beds in the country: photos of designs and main characteristics

The rate of gas exchange, soil moisture and the presence of beneficial microorganisms depend on the size and shape of the beds. All these parameters affect the quality of the soil.

With the help of raised beds, you can grow a large crop of berries, vegetables and fruits. At the same time, you can get good performance even from a piece of land that is not fertile. A feature of high beds is that they warm up faster than low designs.

There are several types of vertical beds. They differ not only in material, but also in functionality. Some options are made from building materials, while others are made from simple ones.

Here are the types of beds available:

  • trapezoidal structures;

  • multi-tiered beds;

  • triangular structures.

When creating isolated beds, factors such as illumination, soil composition, and also its structure can be taken into account. At what height such beds will be placed depends on the volume of the root system, soil characteristics and your own preferences. The minimum height is 15 cm, but to produce better insulation, you can raise them by 30-40 cm. Warm raised landings can be higher than 50 cm, since a layer is still laid on the bottom. Narrow beds can be up to half your height.


The length can be very varied. Most often it depends on the length of the garden. If the bed is too long, then it needs to further strengthen the sides. When arranging any garden, remember your own comfort and convenience. The best width is when you can reach the middle of the structure. Optimal value 90-120 cm.

Can be grown in raised beds different cultures. It is not recommended to use plants with tall stems, as it will be inconvenient to harvest fruits from them. Root crops, strawberries, peppers, herbs and cucumbers are often planted on bulk structures.


Note! A special benefit is the filler for raised beds. It is made from organic ingredients. At the same time, the root system is located in the fertile layer, which contributes to the development and growth of plants.

Related article:

Let's find out how to make original beds and what materials they can be built from. Interesting ideas in our review will help you create a variety of designs.

Features of high beds: pros and cons

The main advantage of raised beds is that you can place a lot of vegetables and plants in a small area. High beds for strawberries, fragrant herbs and cucumbers are especially popular. Also, such structures have other advantages:

  • bulk beds can be filled with specially prepared soil. In this case, the quality of the soil on the site does not matter much;
  • it is possible to adjust the thickness of the soil layer for any plants;
  • raised vegetable gardens are easier to weed and dig;
  • raised beds can be set up anywhere, even with difficult terrain;
  • seedlings can be planted on high embankments earlier, as the soil in them warms up faster;
  • in raised gardens, the soil is looser, which contributes to better gas exchange;
  • can be used for, which will hang from the edge of the fences for a high bed;
  • depending on the material, you can create not only practical, but also beautiful designs. Some options can become a design masterpiece for your garden;
  • high beds with sides are practically not subject to attack by weeds, and are also well protected from mold and fungi;
  • the installation of the beds is not a difficult procedure, they can also be easily dismantled. The location of landings can be easily changed;
  • inside such structures, you can create a comfortable one;
  • soil on raised beds is maximally protected from freezing. During early frosts, such a landing can be covered with polyethylene;
  • the erection of high landings is protected from erosion during heavy rains.

Such structures have certain disadvantages, but there are not so many of them. First of all, you will need top dressing with mineral fertilizers. It is important to monitor the invasion of the bear.

Note! Before starting work, treat the wood parts with an antiseptic and special impregnations. This will prevent the processes of decay and protect against the destruction of materials.

Creating vertical beds with your own hands: photo options

You can also create warm high beds or vertical structures. They are popular because appearance and space savings. In addition, this is an excellent solution for protecting plantings from various pests. Vertical structures are great for growing flowers, strawberries and herbs. You can not only make such designs from improvised raw materials, but even purchase ready-made options. You can see how to make warm designs in the video:


Why buy a vertical bed for strawberries: prices

You can see different variants design of vertical beds, but their most important advantage is their miniature dimensions. Such structures can be built from any materials, even from plastic bottles.

Vertical products do not require special care. They are on optimal height in order to handle them comfortably.


You can see how to make a raised structure for strawberries in the video: To increase the rigidity of the pyramidal bed, you need to install an additional pole as a supporting element. In this case, the boards are mounted on a horizontal surface and attached to each other. A rail is installed in the base. The resulting side is fixed vertically, and then the second and third sides are attached to it. After installing the frame system, the length of the rails is measured. They are placed with an interval of 25-30 cm. To make the shelf raised, its ends should be cut at an angle of 30 degrees. After assembly, the structure is filled with soil, which is rammed.

The technology of arranging vertical beds for strawberries from plastic pipes

To grow strawberries, you can build a vertical garden bed. In this case, you need to prepare plastic pipes, a steel cable and a special knife for cutting. The volumetric section allows you to place the required amount of soil inside. The incision should be made along the structure. To fix the bed in a horizontal position, you need to make a hole in each of the halves. Then a fishing line or cable is pulled through them. Then the parts are placed one above the other. In this case, you can make different levels of beds from pvc pipes with your own hands.


Note! If you plan to place structures in a suspended state, then you need to consider that they can sway. Therefore, it is better to install them in places that are well protected from the wind.

Do-it-yourself erection of vertical beds using a building grid

A compact design can be built for crops such as strawberries, herbs, flowers or potatoes. A good solution would be a vertical bed. For this you need to prepare metal mesh, straw, special soil and essential tool for material processing.


To create a bed, you need to bend the grid in the form of a pipe. In this case, the cross section should be 0.9 meters. The edges are fastened with wire. Straw is laid on the sides, and free space is being filled.

To plant potatoes, such beds should be placed at a height of 50 cm from the surface level. Spaces of 10 cm are left between the plants. Then the first layer should be shed, then the soil should be laid and the seedlings should be planted.

Features of arranging a vertical garden for strawberries with your own hands: using pots

Ordinary strawberries can also be used to grow strawberries. Such designs allow you to create an attractive external design. You can use both plastic and clay pots. Thus, you can create a multi-level composition.

Pots must be selected so that their diameters become smaller towards the top of the structure. In this case, the difference between pairs of pots should differ little.


The largest pot is set in the selected location and filled with soil. After that, a smaller pot is placed in it, etc. When the structure is ready, plants are planted in the soil and watered. The largest pot is installed at the base of the structure. A rod smaller than the diameter of the container is placed inside. The pot is filled with soil, and the rest of the products are alternately strung on rods. After filling with soil, plants are planted. Pots are mounted on a pole or high stump.

The nuances of creating vertical beds for strawberries with your own hands from tires: photos of products

Exist different ways growing cucumbers in open ground. In this case, you can build vertical beds. Also, this option is suitable for planting strawberries.

The tire structure is mounted on the same principle as pot structures. For this, tires of different sections are suitable. But at the same time, keep in mind that old products are not particularly environmentally friendly material.


Before mounting, the tires should be cleaned, dried and, if necessary, painted. The largest tire is placed down, and a part is cut off on the side. The hole is filled with soil and planted with plants. Thus, other elements fit in. Tires can be beautifully decorated with patterns or even unusual cuts.

Article

This article discusses beds for the lazy: photos of the easiest structures to manufacture for those who want to get a neat garden with a minimum of effort, the most common materials and technologies for creating structures based on them. The reader will learn how to combine vegetable crops in one garden and prepare the soil for planting cucumbers. The article contains practical recommendations for beginner gardeners.

Designing the right beds in the garden will solve many problems and open up new opportunities for the owner of a summer cottage:

  • protection against soil erosion in the garden when a large amount of precipitation falls or watering plants. The bed borders will keep the nutrient soil in place, preventing it from washing out onto the paths. In addition, the passages between the structures themselves will remain clean, no dirty puddles and streaks;

  • the possibility of forming the basis for the creation of a temporary greenhouse for the spring. By installing high sides as fences, inside the structure you can organize a multi-layered garden bed, which can be used as a greenhouse. To do this, it is enough to install special arcs and stretch the film. The result is a neat greenhouse house;
  • improving the appearance of the garden due to orderly and even plantings with a beautiful frame;
  • creating borders that prevent the spread of weeds.

Making your own beds from boards and other materials allows you to clearly limit the landing area, so weeds and harmful plants do not have the opportunity to spread widely. If the garden fence is dug in to a great depth, the level of protection increases and perennial weeds that are unable to overcome this barrier can no longer penetrate into the garden bed.

Note! With the help of beds with well-buried fences, the spread of plants such as reeds and couch grass is effectively blocked. Their root system is capable of covering large distances underground if left unchecked.

Photos of interesting designs of beds, recommendations for their creation. Design Tips for the Unusual landscape design Location on.

by the most the best place is an area where the sun is present throughout the day. It is allowed to install beds where the shadow is present in the morning or in the afternoon. If the proposed construction zone is dark throughout the day, you should not use this place for arranging a garden.



How best to make beds in the garden: choosing the optimal design

The choice of the design of the beds is carried out at an early stage of planning, when a place for the garden has already been selected.

Each type of beds has certain advantages:

  • raised or - the most efficient designs that are best suited for growing vegetable crops. Construction Materials to create them they are not expensive, while the soil does not need to be dug up. The width and height of the structures determine how much effort and time it will take to build them. Most often, summer residents prefer wooden beds made of boards. On the network you can find photos of bulk beds with your own hands, such structures do not have a fence. They are also categorized as elevated structures;

  • container beds - will be beneficial in cases where the space of the site is limited. For organizing such beds, pots of small, large and medium sizes are suitable. Garlic, peppers, lettuce and greens feel especially good in containers. Mobility is another advantage of container beds, which, if desired, can be rearranged to any place;
  • open ground beds are the oldest way to grow crops that are planted directly into the ground. In such conditions, it is more difficult to get a good harvest, so the technology of joint planting vegetables in the garden is often used.

Helpful advice! If it is planned to plant crops in open ground, it is recommended to determine the quality of the soil, fertilize it and check the compatibility of vegetables in the garden according to the table.



How to make beds from boards with your own hands: useful tips

Most often, raised beds are made of wood. This material in comparison with others is considered the most practical and environmentally friendly. Similar designs look very aesthetically pleasing in the photo. Do-it-yourself beds from boards have other advantages:

  • a simple maintenance system that involves easy weeding, harvesting and watering plants;
  • the possibility of growing vegetable crops even where the soil is completely unsuitable for these purposes. On the basis of the boards, a frame is made, which is subsequently filled with fertile soil bought in a store, so there is no connection to the quality of the earth and its composition. Thanks to this, plants can be grown even in areas with a rocky surface;

  • box structures allow you to keep the soil inside the beds. In addition, the presence of sides simplifies the process of mounting arcs to form a greenhouse. It is much easier to fix these elements on the fence than to dig them into the soil;
  • even without knowing how to properly make beds in the garden, any summer resident will cope with the manufacture of wooden structures-boxes. The boards are easy to process, and the construction and assembly of the frame does not require an expensive tool;
  • there is no chance that plants planted near the sides will get burned in the summer heat. Wood, unlike metal, is not prone to overheating.

Note! The ecological purity of the material allows you not to worry that harmful substances will get into the soil. Wood is much safer than asbestos cement sheets(slate). The exception is boards treated with chemicals designed to double the life of the material.


Making practical beds from boards: how to make the right choice of material

Summer residents most often create wooden structures on the basis of blanks that are found on the farm. For the manufacture of beds, timber, round timber, slab, lining can be used.

When we are talking about purchasing boards in a store, you should pay special attention to the type of wood from which they are made:

  • a board made of ash or oak will last a very long time. Although the cost of such products is quite high;
  • pine remains the most favorable in terms of price and processing. But this type of wood is highly susceptible to decay while in the ground, so its service life is short. Due to impregnations and antiseptic agents, the life of a pine tree can be extended for a couple of years;
  • boards made of cedar and larch wood are considered the most suitable material for making boxes. Larch has a natural impregnation with resin, thanks to which the product will retain its novelty for many years without the use of additional impregnations. Cedar wood is characterized by a lower resin content, but it is not inferior to larch in terms of durability and at the same time has an affordable price;

  • boards made on the basis of acacia feel good in the ground. It is worth noting that this type of wood is durable and has a solid structure, so the process of processing it will be more difficult. To work with acacia, you need a powerful electric tool.

Helpful advice! It is not recommended to save on the quality of the material. Boards made of bad wood are prone to rapid decay. After a few years, holes will appear on the fences of the beds, through which fertile soil will be washed out during rains and watering plants.

Making beds from boards with your own hands: photos, dimensions of structures

The beds-boxes have a rectangular shape and are made of boards. The simplest design does not require special knowledge and skills, so any novice summer resident will cope with its manufacture. The main thing at the same time is to correctly calculate the dimensions of the boxes.

  • height- many summer residents strive to create the highest possible sides. However, this approach is erroneous if it is not planned to build a warm bed for cucumbers or other types of crops, where a fence height of up to 0.7 m is welcome. The manufacturing technology of such structures requires the laying of a multilayer insulation. For ordinary beds, such high fences are not required, it is enough to limit yourself to 0.15-0.2 m. In addition, wood is susceptible to deformation changes under the influence of moisture, so there is a risk that over time, high fences will swell and lose their attractive shape;

  • width – experienced gardeners it is recommended to choose a width equal to half the height of the person who will take care of the beds. Most often, this parameter is in the range of 0.9-1.2 m, because in the process of work, a person should be able to reach the middle of the structure from the side of the side rail;
  • length- this parameter is practically unlimited. Although unnecessarily long structures reduce the level of rigidity of the side rails, it is therefore recommended to choose a length in the range of 4-6 m.

Helpful advice! When choosing dimensional parameters for wooden beds, it should be taken into account that between them it is necessary to organize passages 0.4-0.6 m wide. Only after that is the layout of structures on the site considered.



Creating mixed plantings of vegetables in the garden: photo examples and optimal schemes

The method of combining cultures in practice is very effective if the companion plants are chosen well. Therefore, site owners calculate according to a special table of the neighborhood of vegetables in the beds before planting. Some types of vegetables have a depressing effect on each other, others can improve the growth and development of neighbors, provide them with protection from pests.

The correct neighborhood of vegetables in the beds: compatibility table

Many summer residents note that due to the proximity of beans as a compaction for the garden where potatoes are grown, the number of Colorado potato beetle is significantly reduced. Marigolds effectively protect cabbage from white butterflies. Despite this, a certain balance must be maintained. After all, an excessive amount of marigolds in the garden can drown out the growth of cabbage.

Table of neighboring vegetables in the garden, creating a successful tandem:

The name of the vegetable crop Plants for a successful combination
strawberry beans, spinach, marigolds, garlic, lettuce
kohlrabi cucumber, lettuce, onion, beetroot
peas carrot, corn, cucumber, calendula, eggplant
onion tomato, celery, beetroot, savory, carrot
beans potato, cucumber, tomato, strawberry, eggplant
cucumber radish, pepper, peas, cabbage, beans
carrot lettuce, onion, sage, tomato, peas
salad strawberry, cucumber, carrot, radish
pepper lettuce, cucumber, beans
tomato calendula, basil, beans, nasturtium, parsley

The following pairs of plants are characterized by poor compatibility of planting vegetables in the garden:

  • cabbage and strawberries;
  • onions and beans;
  • carrots and celery, dill, parsley;
  • cucumbers and potatoes.

Helpful advice! In the garden, in addition to the main crops, it is recommended to plant spicy and ornamental herbs pointwise. Thus, the garden will be not only beautiful, but also useful.



Examples of mixed planting vegetables in the garden: popular schemes

A good example of the compatibility of vegetables in the garden is the combination of onions and carrots. As an independent crop, onions are able to produce about 2.5 kg of yield from 1 m² of beds. Carrots on the same area gives about 6 kg of crop. With the joint cultivation of these crops with 1 m², you can get 9 kg of vegetables. These plants create protective barriers for each other against pests, so the efficiency of the used area increases.

Of course, when planning a co-growing of crops in a garden, you need to group the plants according to their height so that none of them blocks the light for the other. This is necessary because vegetables can not only have different heights, but also grow at different rates. It is desirable that compactors that are planted additionally be lower in height than the main vegetables. The principle of a multi-tiered neighborhood of vegetables in the beds allows you to create favorable conditions for the root system of crops, and also contributes to the rational use of solar energy.

High yields are collected from the beds where beets are planted and late cabbage. To do this, beets (9 plants) and cabbage (4 bushes) should be planted on an area of ​​\u200b\u200b0.8x0.8 m, while not forgetting to fertilize the holes with a glass of compost and a handful of eggshells (pre-grind).

To get an excellent result when planting beans and tomatoes, it is recommended to place the plants in a row with a step of 0.3 m. Along the row with bush beans, it is installed so that each plant is at the dropper. Tomatoes are planted in the central part of the garden. As a result, bean and tomato bushes should be staggered.

Helpful advice! It is better to cut the stems of tomatoes for the winter, and as low as possible. And the beans, on the contrary, are recommended to be left untouched.

Table of crop rotation of vegetables in the beds by crop groups

Crop rotation can also affect the yield of beds. If the annual change of crops grown in the same garden is carried out in the correct order, the garden will produce good yields.

Benefits of proper crop rotation:

  • the possibility of soil fatigue on the site is excluded, since the same vegetable every year absorbs the same set of nutrients from the soil and does it from the same depth;
  • the spread of diseases and pests that infect plants of the same family is prevented;
  • it becomes possible to rationally use fertilizers.

The most primitive way of organizing crop rotation in the garden involves planting plants from different families on the same area every year. It is easiest to break cultures into four groups:

  1. Leaf crops - these include different kinds cabbage, green onions, lettuce, and spinach.
  2. Fruit vegetables - cucumbers, tomatoes, eggplant, peppers, pumpkin.
  3. Legumes - beans, chickpeas, peas.
  4. Root crops - potatoes, beets, radishes, carrots.

Table of the simplest crop rotation in the garden:

Order of disembarkation by year Recommended crops for planting
1st bed 2nd bed 3rd bed 4th bed
1 year fruit roots legumes leafy
2 year roots legumes leafy fruit
3 year legumes leafy fruit roots

Arrangement of beds for cucumbers in the open field: photos and recommendations

For growing cucumbers in open ground, the beds are usually prepared in the fall. This should be done before the onset of rain and temperature drops. The planting area must be carefully dug up and saturated with organic fertilizers. Cucumbers like fertile, light soil that has a good level of air and water permeability. If the soil in the area is heavy, sawdust, peat or sand can be added to the ground to facilitate loosening.

Helpful advice! To get a rich harvest, it is recommended to add a tablespoon of superphosphate and a glass of ash per 1 m² of area. Instead of ash, you can use dolomite flour.

The process of preparing the beds for cucumbers in the spring includes the procedure for disinfecting the soil. For this, the place of the future garden is spilled with potassium permanganate. The solution should be hot and strong. In addition, soil fertility can be increased by introducing chicken manure or manure. This procedure is carried out locally, that is, the fertilizer is placed directly in the trench or hole. After that, the bed is covered with a small layer of soil, where the seeds are then planted.


How to make a bed for cucumbers: agricultural secrets

To get a rich harvest of cucumbers from the garden, you must adhere to the basic rules:

  1. Near the beds should not be canals for irrigation, streams and flowing reservoirs.
  2. If the planting area does not have protection, the garden is best placed in a quiet place where there are no drafts.
  3. Procedures such as watering and loosening the soil should be performed on a regular basis. Otherwise, a hard crust will form on the surface, and the bed will dry out a lot.
  4. Cucumbers grown in open ground need to be fed much more often than plantings growing in closed beds.
  5. During harvesting, it is not recommended to change the position of the lashes of the plant or turn them over.
  6. Weeding plants in open beds need to be done more often than it is done indoors.
  7. It is recommended to cover the entire surface of the bed with a black film.

Cucumbers need a rich biological composition of the soil. Therefore, it is recommended to fertilize the land with organic matter, for example, grass, humus, branches, rotted manure, food waste. In the process of their decomposition, not only the fertility of the soil increases, but also heat is released, warming the soil. So that the high temperature does not damage the root system of cucumbers, experienced gardeners advise to carry out abundant watering.

Interesting fact! Sometimes decomposition organic fertilizers occurs so actively that the soil in the garden warms up to 80 ° C. Under the influence of such a high temperature, many pests, viruses and pathogenic fungi contained in the earth die. The result is a natural sterilization of the soil.

There are several ways to grow cucumbers outdoors. For these purposes, you can form a long ridge bed, a hole, dig a ditch, or build a high structure.


How to make beds for cucumbers with a bookmark in the garden

To form a bed with a bookmark, you will need to dig a trench. The depth of the ditch should be equal to two shovels. Then branches are laid out across and sawdust is poured. The next layer consists of straw and garden waste. You can add autumn leaves, cardboard or newspapers, compost. The thickness of the fertilizer layer should be within 5-7 cm. The bookmark is poured warm water and covered with a mixture of compost and earth.

A bed with a bookmark can effectively serve for 5 years. In the second year of operation, you will not need to add compost to the top layer, because during the decomposition of organic components, the bed itself will produce nutrients.

Advantages of a bed for growing cucumbers with a bookmark:

  • convenient irrigation system;
  • water stagnation is excluded;
  • in the spring you do not need to dig up the soil, it is enough to loosen the soil.

Plants can be planted on such a nutrient base much earlier than is customary to do in ordinary beds. It is not recommended to use beds with a bookmark in low-lying areas and areas where water stagnates.

Warm surface beds for cucumbers in the open field

This type of warm beds for growing cucumbers is built on the surface of the prepared soil. This technology will become the best option for areas that are located in the lowlands. In order to enhance the heating process, the bed is covered with a film. As a result, a greenhouse effect is formed, which has a positive effect on the growth of cucumbers and their yield.

Surface beds also include structures in the form of boxes made of brick, slate or boards. The bottom of these containers is covered with sand, then wood waste. Next comes a layer of organic waste and straw. After laying each component, the contents are carefully compacted and filled with liquid manure. Finally, the bed is covered with a mixture consisting of and soil.

Helpful advice! Skins of vegetables and fruits, fallen leaves, eggshells (pulverized) can be used as organic waste.

Cucumbers are planted in two rows. Plants are placed along the edges of the bed-box, which ensures a sufficient level of illumination. If you plan to plant cucumbers in early spring, structures can be converted into greenhouses. To do this, you will need to install plastic arcs and stretch a plastic film over them. Thus, heating is enhanced and it becomes possible to get an early harvest. Moreover, the result is completely independent of weather conditions.

Raised beds for cucumbers in the open field

Warm raised beds are used when the site is located in a region with a cold and humid climate. Due to this, there is a full warming up of the soil, which allows to achieve a crop on early dates. If they come too close to the garden ground water, the bed rises high, due to which the plantings do not get wet on soil supersaturated with moisture. Stone trees, whose roots are severely affected by groundwater, are planted in a similar way.

As borders for these structures are used various materials. The most popular of them are slate and wood. In rare cases, metal is used. This type of beds can be installed even in the middle of the lawn. If you make a frame in the form of paving stones or tiles, a raised garden with cucumbers will become a worthy decoration of your summer cottage.

As an alternative solution, it is possible to build an artificial mound on the territory that does not have a fence. You can take any length for such a bed, the optimal width parameter is 1 m. You should not raise the decorative garden to a height of more than 1 m. The air that remains in the voids formed between the elements of large organic matter provides good ventilation and contributes to the rapid heating of the soil.

To speed up the process of decomposition of fertilizers, the soil is spilled with a solution saturated with special bacteria. The procedure is carried out twice a year. The first time the soil is watered with bacteria in the spring. Before planting plants after processing the beds, you should wait at least a week. The second time the soil is spilled in the fall after the crop is harvested. When the earth has already been treated with the composition, it should be loosened so that the soil is saturated with oxygen, and the preparation itself is evenly distributed.


How to make beds in the garden: a video review of technology

You will be surprised at your past doubts - whether to make high beds in the country ... Your back will be grateful to you - you just bend over a little to care for the garden. Your knees will thank you - you can just sit on the edge of the garden and work on your garden. Your plants will thank you - no more competition from weeds or nearby fruit trees. Your land will be grateful to you - you do not trample it down and ennoble it with humus. Your high-bed garden can look beautiful, comfortable, and reward you with a generous harvest.

How to make high beds with your own hands.

1. First we must mark out the place for the beds. The usual width of the beds is 1.2 m, the length can be any. We mark the rectangles of the desired size on the ground with sand.

2. We collect high beds. The high bed has no bottom and consists of posts with grooves on all four sides and boards with corresponding grooves. You can buy ready-made garden fences or make your own. For fencing it is better to take wood hardwood, because conifers emit resin, which can have an unnecessary effect on soil composition. We check the horizontal installation of the garden box with a level.

3. We lengthen the high beds. Because Our beds are modular, we can extend our beds from any side with another module.

4. How to protect a high bed from rodents. Even if you have not encountered on your suburban area with moles and other underground pests of the garden, it is better to provide for the protection of your garden right now than to unsuccessfully fight these rodents later. At the bottom of each box we put a metal mesh so that it goes a little to the edges of the fences.

5. How to protect the soil on a high bed from being washed out into the main soil. To do this, we use ordinary packing cardboard in two layers so that it covers the entire bottom of our garden box. If there are not enough whole pieces, we use scraps of cardboard - we fasten them with a stapler with the main piece so that the cardboard at the bottom of the box does not move when the soil is poured.

6. The soil for high beds should be light, crumbly and "fluffy". You can easily check its quality by poking your finger into the ground - if it sinks to the third joint, this is the norm. To improve the composition of the soil, you can add peat or compost. We pour the soil into the garden box, check its horizontal level, water it to compact it a little. During the season, we will need to add a little soil.

7. Irrigation system for high beds. Along the contour of the high beds, it is planned to fix a garden hose with watering nozzles: we need 90 and 180 degree splitters.

8. Trellis for high beds. Because the ground in the high bed is loose, then it will not be possible to install a trellis in it, so we fix the trellis from pvc pipes into the ground next to the garden box. We stretch nets on the trellises for climbing plants- cucumbers and beans. For tomatoes, we install light supports made of steel rod.

What you need to know when arranging a high bed.

1. Try to protect high beds from strong wind and heat, creating partial shade for them with trellises of flowers or tall shrubs.

2. The long side of the bed should face south - so the plants will be evenly lit, otherwise, taller plants will obscure the others.

3. Planting density on a high bed is twice as high as on a regular bed. So plants fight weeds and create a humid microclimate with foliage.

4. High beds with sides will make it possible for older people or people with back problems to take care of the garden.

5. A high bed is a warm bed. Such a bed warms up faster in the spring, and if you make a mini greenhouse on its basis, it will surprise you with an early and generous harvest.

6. Divide a long, tall bed into square segments with cross braces to reduce soil pressure on the side walls of the bed.

Fences for high beds.

1. Most often, wooden fences are used for understandable beds. There are a few points here - do not use used wood, especially sleepers, which can contain harmful chemicals. Do not treat fresh wood with wood preservatives unless you are sure they are completely environmentally friendly.

2. Wattle as a fence for a high bed. For all its environmental friendliness, such a fence has three significant drawbacks - the soil in the bed dries quickly from the wind, proper thermal insulation of the bed is not provided, the soil can spill out through the cracks. Everything is fixable - use a layer of double cardboard around the inner perimeter of the fence. Environmentally friendly, the air gap between the sheets serves as thermal insulation, the earth no longer spills out.

3. As a fence for a high bed, you can use a metal profile, including from an old roof or fence.

5. You can make fences for a high bed with your own hands from brick or concrete. This is a very good option, but keep in mind that concrete will affect the acidity of the soil in the garden for 2-3 years.

6. The best raised bed railings are plastic. They do not emit anything of their own into the soil, excellent thermal insulation, long service life and the ability to set any shape of the beds, unlike standard rectangles of beds with wooden fences.

7. Fences for high beds from improvised materials. You can make the sides of the beds from bottles laid like bricks on a concrete mortar.

Why do we need high beds.

High beds allow you to increase the area under the garden. you can use inconvenient slopes or poor or weedy soil. Raised beds allow in an environmentally friendly way control weeds and soil erosion.

Such beds warm up faster and give an earlier harvest. They allow more economical use of moisture for irrigation.

Various types of high beds.

In addition to the traditional raised bed with high sides, there are several other types of raised beds.

1. Circular high bed. It consists of a round frame, in which there is a path to the center of the garden. This form of high beds is also called the "keyhole".

Branches, roots, paper, compost are placed at the bottom of the beds. In the middle of the bed there is a tunnel for fresh organic waste and water.

This design of the beds provides the necessary moisture and constant enrichment of the soil.

2. High bed without fences. When arranging such a bed, the trunks of trees (not conifers), branches, roots, snags are laid in the ground at a shallow depth; the second layer is this sod removed from the place where you make the bed, laid with grass down; the third layer is 20-30 cm of the main soil mixed with humus.

For irrigation of bulk high beds, an irrigation irrigation system is used, when water comes from a ditch between the beds - a good option for gardens flooded in the spring, or you can use the drip irrigation option when water enters the garden from mini terraces.

The paths between the beds are covered with straw or large sawdust. Never step on the ground in a high bed - this will compact it, and it will be more difficult for plants to receive moisture and nutrients.

High beds of this type can be used not only for a vegetable garden, but also for growing shrubs and fruit trees, if you have problematic soil for them in your summer cottage. The service life of such a bed (until the first tree layer with trunks completely rots) is 20-25 years - this period is enough for any fruit tree.

Spare no space for paths between high beds - so you can always go there with garden wheelbarrow both for harvesting and with a new portion of humus. Have pity on your back - use a wheelbarrow.

If your raised beds are located next to fruit trees, you may need to install a root barrier before laying out the beds - dig a trench, cut the root at the approach to the beds, install a metal sheet in the trench that will prevent the root from growing in this direction and cover the trench with soil.

Learn more about raised beds through your own experience. There are many interesting finds, experiments and new discoveries in this topic for every gardener.

And we have prepared for you a video with 100 inspiring examples of the use of high beds in the country.

Everyone who has a piece of land or a plot of land at a private house thinks about how to ennoble the territory and make their estate beautiful. Many quite successfully achieve this goal through ornamental plants, flowers, garden trees and elements of landscape design. But our garden can and should be beautiful - we picked up 100 photos country gardens to help you verify this.

The style and size of your garden may be completely different, but this does not stop it from being one of the most beautiful corners in the country.

Country garden photo. Unusual shape of beds

Garden beds do not have to be boring and monotonous. See how beautiful the gardens in these photos are due to the shape of the beds.

They can be given a variety of configurations.

And decorative borders and borders can spice up the look of your garden like nothing else.

They can be made from any material at hand, including old boards, metal, brick or stones.

The fences of the beds in the form of wattle are very beautiful. In order to prevent the soil from spilling out of the box, agrofiber is placed under the sides on the inside.

Beautiful garden. Photo how to combine plants

However, it is not enough just to decorate the beds themselves beautifully. To completely transform the garden, you need to work on their contents.

Much of what grows in your garden is beautiful in itself. Why not take advantage of this?

How can you diversify your garden?


Let's look at these photos how you can plant plants, taking into account their appearance, so that combinations of plants create interesting compositions.

At what it is possible to combine not only useful cultures with each other. No one forbade planting flowers and ornamental plants right in the garden with cabbage.

And it is not at all necessary to plant everything in even parallel rows. Try to remember other shapes from school geometry.

Or create creative chaos, the harmony of which is not explained by the severity of forms and lines.

Fantasize! But do not forget about the basic principles of compatibility and crop rotation.

When planting tall plants, also remember that they can provide shade for their undersized neighbors.

Garden: photo of comfortable beds in the country

If all this seems to you excessive and superfluous, then here simplest way put things in order in the garden and give it a neat appearance.
Raise the beds quite a bit and spread agrofibre in the aisles between the beds - it will prevent the growth of weeds, and you will not have to waste energy on weeding the paths. Even these minimal measures can transform a traditional garden beyond recognition.

Such beds do not need to be dug. For planting, they dig holes or trenches, and plant them, covering the bed with mulch from straw or mowed grass. The size of the bed should be such that it can be processed on both sides.

How to process wooden fences for garden beds.

The question often arises of how to process boards for beds so that they last longer. Such boards must not be treated with chemicals that can harm you and your plants. Therefore, neither ordinary drying oil, nor used engine oil, nor conventional wood preservatives will work here. Natural drying oil is environmentally friendly, but it is expensive.

For the same reasons, avoid making bed borders out of slate, plastic, or rubber. Some brands of these materials release toxic substances. And it is impossible even for a professional chemist to determine whether the slate that you are planning for the garden is harmful or not.

The most economical processing option wooden fences for beds FOR MONEY.
From the inside, generously treat the board with copper sulfate (you can directly dip it into it), and whitewash the outside with lime. This option can last up to 15 years.

The most economical option for wooden garden fences BY TIME.
Terrace board, quite expensive, but contains all the necessary protection against decay. It will serve as a garden fence for decades.

But as the practice of summer residents shows, even bu boards taken for a bed box without any processing quietly serve 5-6 years.

A beautiful garden for all tastes.

As an alternative to a regular vegetable garden, you can plant your vegetable garden in the same way you plant flowers - in beautiful rounded shapes next to a pergola or seating area.

The most beautiful thing in any garden is the plants themselves. Healthy, fresh flavored. If you plant a garden as a decorative flower bed, make sure that it does not gape with bare voids after harvesting early vegetables and herbs.

If the garden is small, then you can invest in beautiful fences for high beds.

Combining vegetables with ornamental plants, you will be surprised how unexpectedly sophisticated the look of the leaves and fruits of vegetable crops is.

A beautiful garden, just like flowers, can be grown in a container and decorate the terrace with them.

You can join the ranks of the owners of beautiful vegetable gardens even if you do not have a dacha. Perhaps, root crops such as carrots are not practical to grow on the balcony, but everyone can grow greens and special pot varieties of tomatoes and peppers.

It is not necessary to experiment with the design of the garden for the entire site - try making a small kitchen garden near the house in the form of a flower bed this year. One of your practical steps will give you more information and conclusions than 100 photos of beautiful gardens.

A beautiful garden is not an empty fun. He still brings useful vitamins, charges with health and helps to save on products. Your garden can become a subject of your special pride if it has its own unique design and modern practicality. But, this is your garden, and it is up to you to decide how much you are willing to work in the determination to make it beautiful, as in these photos.

Any hard work put into gardening will surely pay off. good harvest. But there is more desire to take care of a beautiful garden, don't you agree?

Do you want the beds in the country to not have to be loosened, weeded and watered? Learn how to make vertical beds and a pyramid for strawberries.

Garden planning and fencing material selection

The beds can be not only beautiful and neat, but also self-watering. It is convenient to work on such, and weeds do not grow on them. It seems that this is a pipe dream of a gardener, but the so-called beds for the lazy can be done by everyone.


Before you break them, measure the area that you are ready to give to the garden. Zoom out, draw this rectangle on paper. Now imagine yourself as a draftsman. Using a ruler and a pencil, draw beds 1 meter wide on the canvas, their length should be a multiple of two. The distance between the beds is 40 cm. It is quite enough for a comfortable passage.

Now you can go to the garden to transfer the markings from paper to the area. Fence the ridges with pegs and rope. Of course, they must be even and have 4 90 degree angles.

You will get not only beautiful beds, but also perfectly even if you drive four pegs in the corners, and then pull 2 ​​ropes diagonally. They must be the same.


Landing edging can be made from different material. Some use brick for this. You can use empty plastic bottles. To do this, cut the necks to the widest place of the shoulders, pour earth or sand inside the container, turn it over, put it in a previously dug hole so that the bottle is half or a third in the soil. Prepare the second and the rest in the same way and install them next to each other using the same method. If desired, the bottles can be painted, in which case the correct beds will look very cheerful even when greenery has not yet grown on them.


If you have slate, you can protect them with this material. To do this, a ditch is dug around the perimeter. Its width should be slightly larger than the width of the slate sheet. Put it in a recess, fill it with a third or half of the soil, tamp the sheet in this place on both sides.

You can make beds not only from slate, but also from wood. Thick boards or timber are suitable for them. This material is pre-coated with an antiseptic in 2 layers, when it dries, a fence is made. If you have thin boards, then install holding pegs on the inside and outside of the ridge to secure the fence. If the boards are thick enough or you have a beam, fasten them at the corners with self-tapping screws to make a rectangle.

You can buy ready-made metal beds, sheets about 7 mm thick are coated with paint. Such fences are supplied already with fasteners.


Now you know that you can make a fence from:
  • plastic bottles;
  • slate;
  • tree;
  • gland.
Choose the option you like and proceed to the next stage of work.

Warm and self-watering beds

Plants do not like cold soils, and many, for example: cucumbers, watermelons, melons, zucchini, pumpkins, prefer warm beds rich in organic matter. For them, these will be just perfect.

For the device of warm beds, you can apply any of the presented methods. If you have a garden in a lowland, then use the "for the lazy" option. In this case, it is not necessary to dig a trench first, but it is enough to mark the garden bed, during the summer to put any organic garbage on it: mowed grass, foliage, thick stems of plants, tops, kitchen leftovers. Don't forget to water regularly warm bed, it should be covered with a dark cellophane film so that the process of overheating goes better.

During the season, organic matter will half decompose, settle, many weeds will burn out. In the spring, you just have to pour fertile soil on it with a layer of 7 cm and plant pumpkins. They will grow well in such places.

Next year, you will plant other plants here that will be comfortable on such a ridge. If you want it to give warmth for several years, then arrange it a little differently, but this will have to be worked on.

Dig a pit 60 cm deep, lay stumps and dilapidated boards at the bottom, which must first be sawn. Chop branches of trees and stems of plants such as Jerusalem artichoke with an ax. Place a shredded cotton rag on top. Grass, leaves are thrown on such a basis, watered. The warm bed will long time heat plants due to the effect of decay.

In no case do not put the remains of plants, branches and other organic matter affected by diseases on a warm bed. After all, the spores of some harmful microorganisms are very tenacious, and will cause damage to plantings.


In order to spend less energy on moistening the soil during the summer season, provide a system drip irrigation.

The photo shows how to assemble a purchased one, and what it consists of.


This is how the drip irrigation system looks already in the garden.


Instead of pipes, you can use a hose, even an old one. Holes are made in it so that water flows from each under one large plant. If you are making a watering system for carrots, beets, onions, greens, then the holes will be at a distance of 5–10 cm.

Recesses in rubber can be made with a regular nail of a suitable diameter. Put it with the point in the hose, hit with a hammer, and the hole is ready. A branch of the water supply is connected to such a device using pipes, solid rubber hoses and adapters.

To make the water evaporate less, it was not necessary to weed, loosen the ground, cover the drip irrigation system and the soil from above with a thick dark film or black nonwoven fabric either roofing felt, roofing felt.


Holes of the required diameter are cut in these materials with a knife or scissors, and plants are planted in them.

How to make a path in the garden?

Look how good it looks between two beds. It is convenient to walk on this, after the rain your feet will not get dirty in the ground. Therefore, it is not only beauty, but also convenience.


Such paths in the country are made of edged stone, the thickness of which is 4 mm. And here is the entire list of required materials:
  • small gravel;
  • coarse sand;
  • carved stone;
  • cement-sand mixture;
  • reinforcing mesh;
  • building level;
  • rubber or wooden mallet.
Remove the sod with a shovel, pour sand here with a layer of 5 cm, spill it with water, tamp. Pour crushed stone on top, also compact it, put a reinforcing mesh, and a cement-sand mixture on it. Let it dry, then pour liquid cement-sand mortar, start laying stones on it, remembering to leave 5 mm wide seams between them.


To make the track smooth, first make a markup. To do this, pull a rope tied to the driven pegs around the perimeter. When laying stones, tap well with a mallet to remove voids under them.


Fill the gaps between the track elements with cement laitance. At this stage, you can not wash off the solution that has come out, and after a day you will remove it with a spatula.


For tall plants, consider how you will tie them up. You can use ready-made metal trellises, between which a rope is pulled, or you can make them yourself from wood. Then you will get such an amazing garden, on which there will be beautiful beds with picturesque paths.


There are other ideas on this topic that you might like, check them out.

Pyramid for strawberries in the garden


If you want to pick a sweet berry in in large numbers, then arrange just such a bed for strawberries. This building has many advantages.
  1. The berries will be less affected by gray rot, as they practically do not touch the ground and are well ventilated.
  2. Strawberries will be born sweet, as the garden warms up well, and each berry is illuminated by the sun.
  3. This design saves space, as it occupies a vertical rather than a horizontal space.
  4. Shrubs are easier to care for and you don't have to bend over to work those that grow in the middle and upper levels.
  5. The bed for strawberries looks well-groomed, looks beautiful and neat.
These arguments will surely move you to action. Therefore, check out how such a pyramid is made for strawberries.

Choose a suitable place, it should be sunny, as strawberries like to grow in such areas. You need to position the pyramid so that one of its edges faces north.


Clear the prepared area of ​​weeds by digging it up and removing the roots of wild plants. Put a chain-link mesh here, the size of which is 2 m 40 cm x 2 m 40 cm. Place a box of boards measuring 220x220x25 cm on it. Of course, they must be pre-treated with an antiseptic. To prevent strawberry stalks from being cut on the sharp edge of the boards, trim the tree with a planer.

Pour fertile sifted soil into the resulting box to a height of 15 cm. In its center, place an asbestos-cement or plastic pipe with a cross section of 10 cm. You must first drill two holes in it - the upper ones with a diameter of 1 cm and the lower one - 0.5 cm. They are necessary for irrigation. Close the lower end of the pipe.


Pour a mixture of compost and manure over the first tier, compact well. Then install a second box, the dimensions of which are 170x170x25 cm. Soil must also be poured into this second tier.

When pouring the soil, spill it well with water so that the soil sags. Don't forget to add a mixture of manure and compost to feed the plants. You can also pour a little mineral fertilizer for strawberries and plant it in the soil.


In the same way, 3 more floors are created. Here are their sizes:
  • the third - 120x120x25 cm;
  • fourth - 70x70x25 cm;
  • fifth - 20x20x25 cm.
All these tiers are also filled with fertile sifted soil and semi- or rotted organic matter.

Start planting strawberries from the top tier. 4 bushes will fit here (one on each side), on the next place 12 plants. Going even lower one step, plant 5 bushes on each side on this middle floor. On the second tier from the bottom, you can fit 24–28 bushes in total, and 32–36 pieces on the lowest tier.

You can vary the size of the pyramid at your discretion, as well as its number of storeys. In addition to this, you can build other high beds for strawberries, for example, these.

Vertical bed for strawberries

See what materials are needed to arrange high beds.


For them you can use:
  • pipes;
  • polyethylene bags;
  • old barrels;
  • pots with nests;
  • slate sheets;
  • wooden and plastic boxes;
  • tires;
  • wheel disks.
When using pipes, such a bed is suitable not only for growing garden strawberries, but also cucumbers, greens. For her you will need:
  • wide sewage pipe from plastic;
  • central tube for irrigation and liquid fertilizers with a section of 4-6 cm;
  • sackcloth;
  • plastic or metal funnel;
  • drill.
See how such beds for strawberries and cucumbers are arranged.


We start with the design plastic pipe. Step back from the bottom up 10 cm, use a drill to make holes in it. Depending on the variety of garden strawberries, they should be at a distance of 15–20 cm from each other. Before reaching the top 15 cm, finish making holes.

Drill a lot of holes with a diameter of 4-5 mm in the central irrigation pipe, wrap it in burlap so that they do not clog the ground, install it in a large pipe. Close the lower part of this irrigation system with a plug or plug, and insert a funnel into the upper part.

A bed of tires is made even faster. For her, you need to put these rubber parts of the wheels one on top of the other, cut holes, fill the containers with soil and plant strawberries.


You will learn more about how to make beautiful beds from pipes by watching the video.

You will find many ideas on how to arrange a garden in the last video.