doors 

Do-it-yourself work desk in the garage. A detailed description of how to make a table in the garage with your own hands with a drawing and step-by-step instructions. How to make a folding table

The garage is a multifunctional space. In it, you can install and repair cars, design and make various things and mechanisms with your own hands.

If a person likes to spend time in the garage, doing repairs, you need to properly equip your workplace. A workbench is a multifunctional desktop that can be used to process various materials, carry out metalwork, electromechanical and installation work. Also in the design of the workbench, you can think of shelves and drawers to store tools and other items.

Types of workbenches

Workbenches are made for processing metal (locksmith) and wood (carpentry). The designs differ in the material of the countertops. For locksmith models, the countertop must necessarily be metal, since working with metal involves the use of engine oil and other liquids that can leave marks on a wooden surface.

Also, when processing metal parts, effort is often required, the use of a sharp tool, so it is best to equip the workbench with a metal worktop.

Carpentry workbenches are designed to work with wood, so they are not as durable and functional as locksmith models.

Workbench design

If the design of the desktop in the garage is made by hand, then first of all you need to carefully consider every detail, figure out where the tools will be placed, what work will be carried out on the workbench. The model of the table in the garage depends on this.

Standard models are often equipped with drawers, which can be made of wood or metal. Also, the design of the table can be supplemented with shelves, a power shield for hanging tools, which will always be at hand. But most importantly, the workbench must be stable, durable and reliable.

Tool

    Bulgarian with a circle for cutting metal and a grinding disc.

    Welding machine and electrodes. Overalls and protective devices for welding.

  2. Screwdriver.

    Jigsaw for cutting plywood.

materials

    Corner 50 mm by 50 mm, thickness 4 mm, length 6.4 m.

    Square pipe 60 mm by 40 mm, thickness 2 mm, length 24 m.

    Corner 40 mm by 40 mm, thickness 4 mm, length 6.75 m.

    Steel strip 40 mm wide, 4 mm thick, 8 m long.

    Steel sheet for countertop 2200 mm by 750 mm. Thickness 2 mm.

    Steel sheet for making drawer holders. Thickness 2 mm.

    Wooden boards for countertops. Thickness 50 mm.

    Plywood for the manufacture of drawers and for the side and back walls of the table. Thickness 15mm

    Guides for drawers.

    Screws for assembling plywood boxes.

    Self-tapping screws for metal.

    Anchor bolts.

    Paint for wood and metal.

The workbench, which will be made from these materials, has quite impressive dimensions: the length of the table is 220 cm, the width is 75 cm.

The first step in the manufacture of a workbench is cutting the available material into elements. The profile pipe is intended for the manufacture of the frame. The steel corner is designed to create stiffeners. It is cut into pieces and formed from it power frame. Also, a steel corner is needed for edging the tabletop on which the boards will be laid.

The steel strip is intended for the manufacture of guides on which the side panels will be attached. Also, this material will go to the brackets for attaching boxes and plywood.

Table drawers are made of plywood.

The second step is welding the power frame of the workbench. The elements of the countertop are welded first - 2 pipes 2200 mm long and 2 pipes 750 mm each. The frame must be welded so that another frame of corners can be welded on top of it, into which the tabletop boards will be laid. To reinforce the countertop, it is required to weld a few more after 40 cm steel pipes, which will act as stiffeners.

Then 4 side legs are welded along the edges of the workbench. Their length is 900 mm. Power jumpers are welded between the legs, strengthening the structure.

After the base frame is ready, you can start welding the structure for the boxes. To do this, square frames are formed from steel pipes, which are welded to the tabletop on both sides of the table. Frames are reinforced with longitudinal stiffeners.

The third step is to make a frame for the countertop. Two steel corners, 2200 mm long and two more corners 750 mm long, are needed to make the frame. The structure is welded so that wooden boards lie inside it.

The frame from the corner is laid on the frame of pipes and welded. It turns out a reinforced tabletop, 8 cm high with internal stiffeners.

The metal frame of the workbench is almost ready, it remains to weld the crate of the panel for attaching the tool. This requires one metal corner with a length of 2200 mm and 4 corners with a length of 950 mm. Two elements are attached to the sides of the structure and two in the middle, for reinforcement. The toolbar is welded to the worktop.

The frame of the corners and pipes is ready. You can start strengthening the structure. Brackets are welded to the sidewalls of the table, which are cut from a steel strip. A total of 24 parts are needed. A hole is drilled in the middle of each bracket. Through these holes, the side and rear walls plywood tables will be attached to the metal frame of the workbench.

The fourth stage is the manufacture of drawers for the table. Plywood is cut into blanks, which are twisted with screws. The number of drawers depends on what will be stored in the table. If the details are small, then 3 boxes can be built, if large - then 2. It all depends on personal preference.

You can place drawers on two sides of the table, you can mount pull-out structures on one half, and ordinary open shelves on the second.

After the drawers are assembled, metal strips with holes need to be welded between the sides of the drawer compartments. Slides for drawer guides will be attached to these holes on the inside.

The fifth stage is laying the boards in the tabletop frame. Boards with a thickness of 50 mm are cut into blanks of a certain length. If a long board is available, then you need three blanks 245 mm wide and 2190 mm long. If there are no long boards available, then you can lay the blanks across the table. For this purpose, wood 205 mm wide is cut into 10 blanks 740 mm long.

Before laying the wood in the table frame, it must be treated with an antiseptic solution. This will protect the material from rotting and damage by beetles.

Then it is mandatory to paint the entire metal structure of the workbench. This will protect the metal from corrosion. It is best to use a weatherproof and anti-corrosive coating option. Be especially careful when painting welding seams. Drops of metal and irregularities are recommended to be thoroughly cleaned before painting. This can be done using an angle grinder with a metal grinding disc.

After the structure is dry, you can start laying the boards on the countertop. They should not be driven too tightly into the frame. This is due to the fact that the tree tends to expand and shrink with a change in temperature and humidity. It is better to leave a small gap of a few millimeters between the boards. The surface of the wood needs to be sanded, this will make it easier to lay the metal sheet on top of the wood. Boards around the entire perimeter of the table are screwed to the frame with self-tapping screws.

The sixth stage is the fastening of the upper steel sheet. It can be welded to the countertop, but there is wood inside the structure, which can ignite during the welding process. Therefore, it is best to attach the steel sheet with hidden self-tapping screws to the wooden planks. Previously, the metal must be painted on both sides with a rust converter. This covering material looks like a transparent paint coating, is easily restored and reliably protects the metal from rust. You can also paint the metal countertop with the same paint that covered the frame. It will be beautiful, but over time, the paint may scratch and the table will not look too new.

The last step is to install the boxes on the rails and fasten the plywood to the side walls, shelves and power shield in front of the table. This work can be called finishing workbench. After work with plywood is over, it must be coated with a compound that will protect the material from exposure environment. Also, do not forget about the design of the power shield for tools. You can attach special hooks or screws to it, to which the necessary things will be hung.

In order to make it convenient to work at the workbench, you can attach a special lamp with a bending stand to the power shield. In this case, you can optionally direct the flow of light to the right place.

Video - The process of making a workbench

Installing a vice on a locksmith's workbench

A vice is an indispensable attribute of a locksmith's workbench. It is not recommended to attach a clamping tool weighing several tens of kilograms to the tabletop itself. It is best to place a metal gasket between the metal of the table and the tool, 1 cm thick. It is required to drill holes for the anchor bolts in the gasket. Then, in the same places, drill holes in the countertop of the same size. The whole structure is fastened with anchor bolts.

Safety requirements for a homemade workbench design

  1. If the area of ​​\u200b\u200bthe garage is not too large, then you can make a smaller table for plumbing work with your own hands. But, it is worth knowing that the whole structure must be stable, not sway or budge with little effort.
  2. The workplace should be organized in such a way that nothing interferes with a person. When working with a vise, all unnecessary tools should be removed from the countertop.
  3. The corners and protruding parts of the table should not be too sharp and have cutting edges.
  4. After repair work behind the workbench, you need to clean the workplace from metal shavings, drops of oil and other materials.
  5. If a homemade workbench is made correctly, then it can easily withstand a load of 200 kg.

Shield plywood

Video - Do-it-yourself workbench in the garage

Most car owners use the garage as a place to store the car, preferring to repair cars in special services. However, there is a category of citizens who love to engage in a car on their own, repairing and upgrading it. To do this, you need a workbench in the room, on which it is convenient to repair various mechanisms. vehicle. How to make a folding table own garage so that it does not take up much space, we will figure it out below.

The folding table has many features that distinguish it favorably from the usual design:

  1. A folding table installed in the garage does not take up free space and unfolds only when necessary.
  2. It performs various functions that are problematic to implement without it. On a folding table in the garage, you can fix a broken part, have lunch and spread out the drawings or diagrams needed when repairing a car.
  3. Fits beautifully into the interior.
  4. Can be assembled by yourself.

Note! Next to the folding workbench, you can organize a rack with tools, which will increase the convenience of work.

Material selection

The folding table is made from the following materials:

  • metal;
  • wood;
  • combination of metal and wooden parts designs.

The advantage of wooden folding tables made in the garage with your own hands:

  • low cost;
  • the tree is easily and quickly processed, taking the desired shape. For creating simple designs no special tool required;
  • wooden products give the atmosphere a homely atmosphere, diluting a large number of metal that surrounds you indoors.

A metal folding table mounted on a wall in a garage has the following advantages over wooden structures:

  • the durability of the metal is much higher;
  • sheet metal is harder to damage.

Metal cons:

  • hard to do alone
  • special tools are required;
  • some tools require some skill to use. For example, it is not enough to have welding machine, you need to know how to handle it;
  • more expensive than wooden models.

Many owners prefer to combine materials. This lightens the overall weight of the structure and reduces the final cost.

Design

Designing is the main and most difficult part in creating a folding table in the garage with your own hands. Without a well-prepared drawing, which indicates the main structural elements, you will not be able to properly purchase materials and prepare the necessary set of tools. The drawing is made independently or downloaded from the site and subsequently upgraded to the needs of a particular owner.

Important! Do not neglect the design stage, otherwise, after assembly, it will turn out that the design came out inconvenient and only gets in the way, instead of being useful.

Required Tools

For wooden structures you will need:

  • wood saw;
  • a hammer;
  • nails;
  • screwdriver or screwdriver;
  • screws;
  • roulette;
  • corner;
  • marking pencil.

When creating a metal model, you will need:

  • welding machine;
  • Bulgarian;
  • chalk for marking;
  • screwdriver;
  • a set of screws;
  • corner;
  • roulette.

Depending on the complexity of the selected drawing, an additional set of tools may be needed.

How to make a folding table in the garage with your own hands

The folding workbench is made according to the following algorithm:

  • collect the countertop;
  • we make supports that will support the structure in a disassembled state;
  • at the height of the legs fasten to the wall wooden beam or metal corner. Loops will be attached to it, uniting the timber and the countertop into a single structure;
  • fix the supports.

Note! Do not forget to equip the work area around the workbench with electricity and proper lighting.

Everyone needs a garage to store their car. However, experienced, competent drivers use the premises for technical inspection, repair work, machine maintenance. And they know how not only to fill in oil, but even to do some rather complicated work from a technical point of view, repairing their favorite car. As a result, the garage turns from a simple storage into a real workshop. And here you should already have all the equipment necessary for work. A workbench in the garage in this case is simply necessary.

Why is a workbench so useful, what is it? The fact is that the workbench is a special desktop with many functions. On it, you can effectively engage in electromechanical, installation and plumbing work in convenient conditions. Such a table is perfect for processing all kinds of materials. At the same time, everyone, if they approach the task responsibly, will be able to make a reliable workbench in the garage with their own hands.

Let's get to know the workbench closer. It is often compared with desk. It maximizes human capabilities, as it provides an excellent opportunity to effectively use a durable surface for work. At the same time, there is also a sufficient number of sections for storing the necessary items, tools and parts. It is such a real workbench, complemented by numerous shelves and drawers, that is most efficient and convenient for working in the garage.

We list the main structural elements of the workbench.

  • The frame with legs is a supporting base. It is she who becomes the base on which all steel parts are already fixed.
  • The countertop should be powerful, thick and durable. She will have to withstand the most serious mechanical loads, for example, hammer blows. It is customary to make a countertop from a thick wooden board or metal.
  • Bedside tables are usually placed at the edges. It's great when there are a lot of drawers, shelves. In such sections it is convenient to store the necessary parts, compact spare parts, small tools.
  • An additional shelf usually takes up space directly under the countertop. There it is most logical to place those items, tools, parts that are most often used directly while working on a workbench. It will be very convenient to take them: everything you need will be in the free access zone.

pay attention to important point. When you put a table in the garage, be sure to take care of the level of illumination. Consider in advance alternative lighting for the work area. For example, you can use different types lighting fixtures. Install an additional light source on the ceiling, and attach a rotary lamp with a directed beam of light to the wall or table. For more effective work as well as safety good lighting is essential.

Types of workbenches

Before you install a specific workbench in the garage, you should figure out what types of such desktops are. It is customary to divide workbenches into metalwork and workers.

The carpenter's workbench has a wooden tabletop. The frame can be made of wood or metal. Of course, a wooden countertop, no matter how thick it is, is still very vulnerable. Working on such a workbench with metal parts is inconvenient. The surface of a wooden tabletop is damaged by metal shavings, it is difficult to remove numerous traces of engine oil from it. Unfortunately, the service life of such workbenches is short.

A locksmith workbench in the garage is more suitable. It is he who attracts reliability, durability, increased resistance wear and versatility. The main secret- Sturdy metal worktop It can comfortably work with parts made of any materials, in particular, metal. On locksmith workbenches, they grind and cut, sharpen and saw. The advantage of the workbench is also in its stability, because when working with metal parts, sometimes a lot of pressure is exerted on the tabletop. Tools are best stored on shelves, drawers of a workbench.

Materials: wood and metal competition

Do you want to make a workbench in the garage yourself? Then you will need to choose the main material: such tables are made of metal and wood. As a result prefabricated structures differ in the level of reliability, stability. Of course, a metal workbench is more functional, stable, durable.

Let's pay attention to the main features of workbenches made of different materials.

  • In the process of making a workbench, it is easier to work, of course, with wood. It is enough to stock up on a hammer, jigsaws, screwdrivers and a grinder or a hacksaw to quickly make a wooden workbench.
  • It is much more difficult to make a metal desktop, since you need to be able to process metal, as well as carry out welding work. It is quite difficult to work with iron blanks. It is desirable to have at least minimal skills. In addition, it will require special equipment.
  • When experts compare metal and wooden workbenches, they note: wooden table less durable, but metal is too heavy, not so convenient to use.
  • The optimal solution is combined workbenches. You can make a wooden tabletop, and then additionally cover it with a metal layer. And then it will be possible to calmly work with metal, use a vise.

Do you want to have your own workbench in the garage, want to make it yourself, but do not intend to use it too often? Then it will be for you the best option traditional wooden desktop. Just make the countertop thicker, more reliable. It is very important to ensure resistance to mechanical stress.

Preparatory process

How to make a workbench in the garage with your own hands. First you need to get ready for work. First of all, define optimal design, dimensions and shape of your future workbench. Let's say that sometimes the best option is to place a workbench in the corner of the garage. This will allow rational use of space and create a comfortable working area.

  • Choosing a place to install a workbench is one of the most important tasks. Great importance has a level of illumination. Consider how natural light will be. The best way– when the light falls directly or from the left side. When we are talking about artificial lighting, everything must be properly organized. It is advisable to make an overhead light, as well as install an additional source of directional lighting for the working area.
  • The effectiveness of work on a workbench, the level of comfort also largely depend on the height of the tabletop. It is necessary to calculate the optimal height in advance. Just stand up straight and bend your elbows. Imagine that you are leaning on a workbench. That's just the distance between your hands and the floor is optimal height workbench.
  • Don't make it too wide. It's great if a person can freely reach the opposite edge of the countertop. Good size- 50 cm wide. The length can be made much larger. The longer the table, the more parts and large tools can be laid out on it.

A good solution is to equip a workbench the right tools. For example, they fix a jigsaw, a circular saw on the tabletop.

We select tools, materials

Immediately clarify the list of materials and tools. To work, you need a drill and a welding machine, a tape measure and a level, a grinder with an electric jigsaw. Be sure to stock up on the following materials.

  • Steel strip and corner. The thickness should be 4 mm.
  • Anchor bolts, screws and self-tapping screws.
  • Square tube with a thickness of 2 mm.
  • Steel sheet to make drawer holders and countertop. Optimal Thickness- 2 mm.
  • Drawer guides needed.
  • For the countertop you need to take a massive wooden board with a thickness of 50 mm.
  • The walls of boxes, tables are made of plywood with a thickness of 15 mm.
  • To design and improve performance properties, you also need paint for wood and metal.

If you make a workbench out of these materials, it will be very strong, durable and stable, easy to use.

We assemble a workbench for the garage with our own hands

Consider the algorithm for making a workbench for a garage.

  1. First take four supports. They are made from steel. The legs are welded on top.
  2. Reinforcing ribs are required. At a distance of 12-15 cm from the floor level, small fragments of the corner must be welded.
  3. To fix the boxes, shelves, additional racks are welded.
  4. Then comes the time to make the countertop. You can take oak boards. They must be firmly fixed to the frame. The best option is to pre-make bolt holes around the perimeter of the frame.
  5. Boards also need to be drilled. Bolts should fit well into the holes.
  6. Have you fixed the lid yet? Now it's time to sheathe the metal. It is advisable to use galvanized iron. It is fixed with screws.
  7. Finish the edges of the metal with a file.
  8. Separately make shelves, countertops.
  9. Assemble the entire workbench.
  10. At the final stage, it is necessary to treat wooden elements with special compounds to prevent the formation of fungus and mold, as well as flame retardants. You can additionally decorate the desktop using .

When you want the workbench to stand as securely as possible, you can attach it to the floor by welding metal corners to the legs.

If you approach the task as responsibly as possible, follow the technology and use useful tips, your workbench will be in no way inferior to ready-made desktops from the store.

Video: we study the process of making a workbench in the garage

Do you want to visually consider all the key points, the algorithm of work in the manufacture of workbenches for the garage? Now you have a great opportunity to see all the useful information on the video.

Here you just feel like a direct participant in the events! It will be possible to assess the complexity, the order of work. In the videos, the emphasis is on all the most significant nuances. After viewing, if you take the matter responsibly, you will be able to install such a functional desktop in the garage with your own hands.

Good luck to you! Have a reliable, efficient workbench in your garage. With him, work will turn into pleasure.













The primary task of the garage workbench is to create an ergonomic workspace for plumbing and carpentry work. The article describes the types of desktops and the features of their designs. The material below contains information about the pros and cons of wooden and metal models and the features of their configuration. You will get acquainted with the criteria for choosing equipment and organizing the workplace.

Complete order in the workplace Source mcahamilton.org

About types of workbenches

Car owners regularly face the need to perform a variety of repairs. For anyone involved in carpentry and plumbing (whether at a professional or amateur level), a well-equipped workplace helps to save time and energy, and also provides a better result. A workbench is suitable for the role of universal equipment suitable for operation in garage conditions.

Initially, the workbench originated as a carpenter's workplace for woodworking. With the advent of a variety of (including electrical) equipment and the division of professions, the workbench began to specialize. Today, in addition to carpentry, there are carpentry and locksmith workbenches, as well as combined varieties.

Great grandfather modern models Source pinterest.com

Basic equipment

A workbench in the garage is called an equipped desktop, consisting of various modular elements, which include:

    Metal carcass(table). Its design is designed for a solid weight, from 70 to 300 kg (depending on the model). Tables designed to work with heavy and large parts (such as wheels) are reinforced with additional diagonal connections.

    table top for carpentry and locksmith work. Depending on the functions performed, it can be made of galvanized or stainless steel, chipboard, plywood. The margin of safety of the countertop is designed to withstand dynamic and shock loads, contact with chemically active compounds.

    Accessories. The workbench serves not only as a working area, but also as a place to store tools, spare parts and other equipment. Therefore, the mandatory components of the design are cabinets, screens, drivers (drawers), shelves, hanging holders.

Every thing in its place Source interstroy.info

Selection criteria: wood or metal

For many motorists, the garage is a second home, so they approach its arrangement with due attention. A particularly crucial moment is the acquisition of a workbench; the selection criterion may be the purpose for which it is intended. In most cases, such equipment is installed to perform the following work:

    For regular maintenance and state support car.

    For minor locksmith work, minor repairs, correction of defects related to the maintenance of the house and backyard territory.

    If plumbing or carpentry is part of your hobby.

The first question that arises when choosing is the material of manufacture. There are wooden (most often home-made) and metal workbenches offered by various manufacturers, both domestic and foreign.

Workplace for the soul Source nw1ab.ru

Wooden workbenches

A wooden workbench in the garage, made entirely or partially of wood, is suitable for occasional and short-term work with simple details; it is not well suited for processing complex metal components. The frame of such models is made of hardwood (beech or oak) and is fixed with self-tapping screws. The stability of the table is ensured by additional spacers, transverse or x-shaped. Wooden models are usually equipped with shelves or storage boxes. wooden table top finished with metal along the edge.

A common model is the design of two massive cabinets connected by a table top. This option looks quite practical, since it solves most of the problems associated with the placement of tools. Despite the relative cheapness and good (albeit somewhat limited) functionality, many believe that a workbench in a wooden garage has significant disadvantages:

    Wooden locksmith table not designed for heavy use.

    At enhanced exploitation frame service life shrinking.

wooden workbench Source whilesafe.blogspot.com

On our website you can find contacts of construction companies that offer the service of installation of metal structures. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

    Table area does not allow posting several types of equipment at the same time.

    The wooden surface of the countertop under the influence of chemical agents (paints, solvents) and metal dust deteriorates over time, and traces of oils remain forever.

    Wood - flammable material; in combination with a nearby collection of chemicals, this property increases many times over.

Metal workbenches

To assemble a functional locksmith table made of metal, you will need special equipment and skills in working with metal (fragments are connected by welding). Metal models, assembled in the workshop, have a solid construction and modern design. Despite the higher price due to the cost of the metal and more complex process assembly, metal equipment has many advantages, which include:

    Long service life. Stainless steel models boast a flawless service life of 50 years.

Metal workbench Source shkaf-nsk.ru

    Large selection of models and their kits. Manufacturers offer options both universal and with a narrow specialization.

    Multifunctionality. You can perform any kind of work, including turning, cutting, grinding.

    Mobility and compactness. Many models can be disassembled (completely or partially), and if necessary, add new tools (vices, clamps).

    light weight while maintaining strength. The tabletop is resistant to deformation and damage (scratches).

    Minimum care. The design is characterized by increased resistance to corrosive processes and does not require painting. Cleaning metal dust and chips from the surface of the countertop does not take much time.

Video description

About the review of workbenches in the following video:

Workbench parameters

To determine the size of the workbench, you need to understand how much space in the garage you are ready to allocate for the workplace. The choice of design for arranging a garage is based on several indicators:

    Depth. Most garages are modest in size. Given this limitation, for home use, locksmith workbenches with a tabletop depth (width) not exceeding 0.5-0.6 m are preferable.

    Length. An important parameter that should not be reduced unless absolutely necessary. The longer the countertop, the more convenient it is to perform plumbing work on it, to install auxiliary tools. If you intend to use a circular saw or an electric jigsaw, you will also have to allocate part of the countertop for these works. In practice, most garage owners prefer to install workbenches about 1.5-2 m long.

Compactness is one of the advantages Source koffkindom.ru

    Workbench height in the garage. It is determined by the convenience for the owner and depends on his height. On average, the location of the countertop at the level of the middle of the hands (if you stand nearby) is considered convenient.

    Technical clearance. For high-quality cleaning, it is convenient that the lower part of the structure is raised 15 cm above the floor.

    Strength. Welded structures with support of the supporting frame for 6-8 legs have the necessary strength. Since most of the work on car maintenance is metalwork, a metal workbench will be the best choice.

    Functionality. To work comfortably, a spacious countertop is not enough. Of great importance are racks, shelves and drawers. All of them should be placed at a convenient distance from the working area; it's good when tools, power points, materials and containers for small items do not interfere with the work, but are always at hand.

Video description

About the locksmith workbench in the following video:

Workplace organization

Not much in the average garage free space. In addition to compactness, the criterion that affects the parameters of the desktop is the amount of work that you are going to devote your time to. If you are supposed to not only drill and hammer nails, but also engage in more complex manipulations, you should think about a table. bigger size. It is more convenient to carry out periodic processing of parts or workpieces if the vise and the sharpening or drilling machine are in the assembled state. The garage owner will have to find a solution for several more tasks:

    Storage. Due to limited space, another important task is assigned to the workbench - providing convenient storage conditions. The right workbench is used not only as a desktop, but also as a convenient container Supplies, spare parts and tools.

When everything is at hand Source tr.pinterest.com

    Location selection. A specific garage task is to choose a place for the desktop. Two conditions must be met. First, the distance between the car and the workbench and shelves in the garage must be at least one meter. The second condition is that you should be comfortable working next to the machine, without the risk of damaging it.

    Electrical connections. Electrification must be safe, taking into account the effects of dampness and corrosive liquids common in garage work. The electrical wiring must be laid in a fireproof corrugation or hidden in strobes. If your electrical panel has a metal case, it must be grounded without fail.

The car must not be a hindrance Source yasminroohi.com

    Lighting. Considering that there are always shadow areas in the garage (from the car, shelves and racks), a combined system of several light sources designed for different tasks will be a practical option. Above the workbench, in the work area, it is convenient to install a bright rotary lamp, protected by a lampshade. The lamp can be made removable; it is also convenient to build it into a workbench, and not fix it on the wall - if you want to move the table, there will be no problems with electrification.

Model Features

Mass-produced workbenches are convenient in that their characteristics are set during production and correspond to their intended use. Depending on the technical conditions under which this or that workbench will work, various models may have the following options:

    Countertop material. Moisture resistant plywood or MDF covered with galvanized metal. The thickness of the tabletop varies between 24-30 mm.

Professional approach Source extxe.com

. Serial models allow a load of 300-350 kg. The workbench of the strengthened series is calculated on 400 kg and more.

- 20-30 kg, on a bench shelf - up to 40-50 kg.

Protection. A lock, key or: high security (pin) can be installed on the cabinet.

Accessories. Various shelves, holders, screens and hooks.

Factory-made workbenches are delivered unassembled; By design, they can be divided into three groups:

    pedestalless. The perfect small workbench for a modest-sized garage. The easy-to-assemble design is characterized by a sufficient size of the working surface, which, if necessary, is folded (folding workbench). Stability is provided by adjustable legs. Standless models can be additionally equipped with drawers on bearing guides.

Video description

About the organization of the workplace in the following video:

    Single pedestal. Robust prefabricated structure with a reinforced top and a weight of 96-105 kg. Such a workbench is equipped with both a comfortable work surface and a cabinet with drivers (drawers on ball guides with different heights) or adjustable shelves. The drawers are locked with a central lock. Some models are equipped with a toolbar.

    Two-pedestal. The weight of such models is 100-115 kg; they are completed with two drivers with drawers of different heights. Maximum permissible load for each box (with uniform distribution) is 30 kg. The kit may include a perforated screen - a panel designed to accommodate holders and hooks.

Combined workbench Source: searsoutlet.com

Conclusion

A garage work table is a kind of industrial furniture that should be durable and comfortable in everyday use. These properties help the owner to fully concentrate on work, thereby reducing the risk of accidental injury. A workbench for a garage will be as effective as possible if its characteristics (load capacity, dimensions, equipment) correspond to the tasks being solved.

Initially, the owners of the boxes begin to make a table in the garage with their own hands if there is a need for processing wooden products, and also periodically requires a place to secure the workpieces. The classic version of such a workbench consists of a tabletop in which several holes of various shapes are cut, wedges are hammered in and combs are inserted to stop.

This is the very first version of the garage tables, which was used 20-25 years ago. Now the garage table has many shelves and several cabinets, and the design itself has changed over time. Let's start the article with a description of the design of the garage workbench.

How to make a table in the garage with your own hands - a description of the design

The simplest version of the table is made from the following elements:

  • Frame made of wood or metal on 4 legs;
  • Tabletop, 6-8 cm thick with a flat surface and smooth corners;
  • Shelves and drawers for tool storage.

If you need to make a table for working with metal products and spare parts, then you should get a metal workbench. If you need to periodically carry out car repairs and various carpentry work, a wooden workbench for the garage will be enough. Consider how to make a do-it-yourself locksmith table for a garage.

locksmith table for garage

In order to properly make the frame of the structure, you must first acquire a drawing or plan of the table. With the help of a clear model, you will be able to correctly represent the finished result and carry out all the work step by step. If you need not only carpentry in the garage, but also a place to process steel objects, then you can follow the following plan:

  • To give the frame rigidity, it is necessary to use an iron corner (the thickness of the corner is 5 mm, and the rib must be at least 35 mm),
  • In the form of a tabletop, you can use a 2 mm sheet of steel,
  • We straighten the metal sheet and fix it either on a 50 mm board or weld it to the frame from the corner,
  • For sliding shelves there is no need to use thick boards - plain plywood will also do,
  • In the form of corners for drawers, you can use a corner of 3 mm,
  • If you do not need a portable or folding table in the garage, then you can make a stationary frame, fixed with anchor bolts,
  • We weld the metal table top to the corner along the contour and clean the drops to smoothness.

A metal garage table is a versatile option for any room. By making a wooden desktop for the garage with your own hands, you can create a convenient place for processing any product. Next to such a workbench, it is also necessary to make a chair for the garage with your own hands.

Do-it-yourself wooden desktop in the garage - photo and video step by step instructions

For its manufacture, it is necessary to prepare photo materials and a project. Photos and drawings of the table in the garage with your own hands will help you understand what and how the workbench is made of. When building a workbench from wood, you will need the following tools:

  • Bulgarian with a set of circles,
  • Apparatus for welding and a set of electrodes,
  • Level and 2-5 meter tape measure,
  • Self-tapping screws with a screwdriver,
  • Manual jigsaw for cutting plywood sheet,
  • Electric drill.

Also, pre-prepare the materials for the working folding table in the garage:

  • Several corners 50x50 mm with a shelf thickness of 4 mm and a length of 5 m,
  • Square pipe 60x40 mm,
  • Steel strip for the curb with a width of 40 mm and a thickness of 4 mm,
  • Metal sheet for the table surface 2.2x0.75 m,
  • Boards for wooden crates (beam 50x50 mm),
  • Pieces of plywood for drawers and desktop walls,
  • Metal guides for cabinets and a set of self-tapping screws / screws for connecting all elements.

Stages of making a table for a garage with your own hands with a photo

First, we cut all the materials into the necessary elements. Via profile pipes making a frame. Steel corners are intended for stiffeners. It is also additionally necessary to prepare a corner for edging the table surface.

Next, you need to properly weld the power frame of the workbench. First, we weld all the cut elements for the countertop. Then, to the finished frame, you need to attach the frame from the corner by welding, into which the boards for the tabletop surface will be inserted. After we actually succeeded in making a garage table in the form of a frame, all that remains is to weld the side legs around the entire perimeter of the workbench.

The next step is to weld the structure under the drawers. At the same time, a square frame for drawers is made of a pipe, which is fixed to the tabletop on both sides of the workbench. The frames will only need to be reinforced with longitudinal ribs.

The metal frame of the garage desktop is completely ready, it remains only to fix the crate of the finished panel to secure spare parts and equipment. As a result, it remains only to fix the panel by welding it to the countertop.

In fact, a folding table in the garage is made according to the same principle as a stationary one. The only difference is the use of loops that are attached to the side of the table. After making the structure, it remains only to sand well and paint the countertop along with the frame. If you want to extend the life of such a workbench, it is best to treat the boards and cabinets with an antiseptic.

Do you want to ensure maximum convenience when working with the workplace? Make a sofa in the garage with your own hands and fix a stationary lamp over the table, which will have a bending stand. With a small lamp, you can easily direct the light to the right places when repairing and cutting products.