Do-it-yourself sandbox with a lid on the site: the child is having fun - the parents are doing business. We make a sandbox with a lid on the site on our own Sandbox with a ventilated gable roof
- this is a great way to show love and care for your baby, as well as a source of pride and admiration. After all, what could be better for your beloved children than safe, environmentally friendly and simple beautiful place for relaxation and fun.
It is important to remember that sandbox games develop Creative skills children, fine motor skills of hands, eye, patience, poise and even perseverance in achieving the goal - after all, sand is not the strongest building material. In addition, according to psychologists, sand has a positive effect on the human psyche, absorbing negative energy, calms and stabilizes nervous system.
How to make a sandbox with your own hands: step by step instructions
Today, parents and children are offered a wide range of sandboxes. The most advanced ones are plastic made of linear polyethylene. They are very safe - no splinters, plus - rounded shapes significantly reduce the possibility of injury.
In addition, they are UV resistant, while remaining bright and attractive, they do not need to be repainted annually, as wooden and easy to wash. Remaining in the sun, unlike metal ones, they practically do not heat up.
And in terms of durability, they are significantly superior to both wooden and metal samples. Due to their low weight and modular design, they are quite mobile - they can be transported in a car, and brought into the house for the winter. barn. However, with all its advantages, a plastic sandbox is quite expensive, especially considering the “temporary” nature of the purchase.
It can be just four high poles at the corners of the sandbox, on which an awning canopy will be fixed, or a wooden roof canopy covering the entire area of the sandbox. But a sandbox-fungus will look more decorative, made with your own hands from a bar (section 10x10 cm) and a “hat” from triangular pieces of plywood. Under it, you can wait out the sudden oncoming rain and hide from the sun.
When there are children in the family, it is important to properly organize their leisure time, especially in the summer cottage, when parents are busy in the garden. Landscaping a children's play area begins with an idea for decorating a sandbox with your own hands.
To date, many have been proposed interesting options- from multi-level structures in the form of ships with sails to the simplest tire circle. But it's not only important original design and convenience, but also the safety of a place for children to play excitingly.
What materials are used to build country sandboxes
A dacha is a place where, for the sake of economy, everything that was expected to be used in a garage, a shed, on a balcony and mezzanines is used.
Much of the deferred "just in case" is also suitable for a playground with a children's sandbox:
- bricks and foam blocks;
- wooden chocks and bars;
- cutting boards;
- old skis;
- pieces of tarpaulin and camouflage net;
- plastic bottles;
- bald tyres.
Availability suitable material determines the shape, size and height of the sides of the sandbox being built.
For maximum convenience and hygiene, it should have:
- lid;
- awning, canopy or "fungus";
- planes for laying out "pasochki";
- bench or seat;
- a place to store scoops, rakes, molds and buckets.
If necessary, some of the materials are purchased in addition. Particular attention should be paid to the quality of the paint, which is used to open the sides of the sandboxes. It should be non-toxic, odorless, dry quickly and not stick to your fingers.
Painting work is desirable to be done in the absence of children, showing the finished result as a gift, like a photo of a sandbox in bright colors.
The sandbox is needed not only to keep the child busy, it is useful for his development.
The construction of figurines develops spatial thinking, fine motor skills and creativity of the baby. Two or three companions in one sandbox - the opportunity to communicate and learn to build relationships.
If the children have too developed proprietary ambitions, it is advisable to build several departments with sand and give their own inventory.
The quality of sand in sandboxes in the country, as well as preschool institutions, has special requirements. Fresh river or quarry sand is best, which must be sieved to remove large fractions, glass and debris.
During the game, it gradually crumbles and spreads around the site, clogged with dust and garden vegetation. Over time, it is not only filled up, but also changed 2-3 times over the summer.
The children's sandbox should be closed from unexpected "visitors", and the polluted sand should be taken out of the site. A convenient sand cover is easy to build from leftovers old furniture, inflatable boat and other handy materials.
Choosing a playground for a children's sandbox
It is desirable to ennoble a favorite place for children's games with sand. lawn or paving slabs much better than an abandoned lawn with roots and branches.
Ideally, a cultivated place with a green lawn, but gradually it will be covered with sand. A sandbox can be built among flower beds, right next to garden path in landscape design when there is no other place.
Note!
The best location for a playground is opposite the windows of the kitchen, where mom and grandmother often cook. The kid will be in sight, but no one will distract him from the exciting game.
Tip: If there is no suitable place at all (around the garden and vegetable garden), a mobile sandbox in the form of a box on wheels can be moved under the window or removed to another place along the hard surface of the courtyard.
But you need to be very careful when a car or motorcycle enters the yard.
Attention: It is undesirable to build a sandbox under a tree from which flowers, branches, leaves and ripe fruits are showered. Wasps and flies flock to rotting fruit, which are unsafe for children. Caterpillars can fall from branches. When treating trees from garden pests, toxic chemicals can get into the sandbox.
How to make an inexpensive country sandbox with your own hands
The simplest structure with a round shape is made from a large tire. In this case, sandbox drawings and additional costs are not needed.
- On the prepared site, mark the place where the tire with sand will stand.
- The bottom is fixed on the ground or an asphalted area with metal pins, it is possible to partially deepen the tire.
- The bottom of the “loose tank” is covered with a tarpaulin so that living creatures from the ground do not crawl into the sand.
- The surface of the tire is painted at its discretion, but can be left uncoated.
- It is desirable to install a bench and an awning nearby, but a beach umbrella is enough if the child rarely visits the country.
Note!
Another option is a classic square or rectangular sandbox with wooden sides. Made from leftovers edged board 20-30 cm high. For the simplest design, a drawing is needed to accurately calculate the consumption of materials and mark the sawing of the boards.
It is convenient for children when there are benches or triangular crossbars in the corners on the sides, on top there is an awning from the sun or a “fungus”, as in the photo.
For 2-3 kids, it is better to make a spacious sand box. Any design in the corners is fixed with pegs. It is better to pave the bottom with hollow bricks - excellent drainage and a solid base.
Children most of all like colorful sandboxes of free form made of stumps or in the form of attractive objects.
There are also more complex ideas for decorating a sandbox in landscape design - a whole children's town with slides and houses. For a structure, a rocket, a boat, a car or a tower, you need a lot of expenses and the hands of a master.
If there is no grandfather or father in the family who can make a real country masterpiece under the sand, you should not deny the baby such joy. You can invite a specialist from a specialized company by showing him a photo example from our gallery.
Note!
DIY sandbox photo
It is proposed to familiarize yourself with the project of a universal sandbox - a beach, for a private house or cottage.
Easy to manufacture, the design is a multifunctional transformer with elements that change position according to their intended purpose. In fact, this is a mini beach with all the attributes for children to relax on the shore of the reservoir. That's just, you can place this sandbox anywhere.
The materials for the manufacture of this miracle are publicly available and not expensive. When selecting materials, it should be taken into account that the sandbox can be in the open air, all year round. At least the whole season, in any weather.
Of course, the proposed design is easy to install and dismantle. But still, it is better to choose materials that are resistant to weathering.
Covers for functional compartments: sand tanks, water tanks and toy storage - use as walkways, walkways or play stands - additional convenience.
The exact dimensions of parts and design parameters are shown in the figure:
OPERATING PROCEDURE:
The work will need instruments: an electric jigsaw or a simple wood saw, a screwdriver or a set of screwdrivers, an electric drill or a brace with a set of drills, a clamp, a ruler, wrenches.
materials: polished board, plywood, self-tapping screws, washers, capercaillie bolt, fabric, trough
Manufacturing, we start with the internal and side partitions. When assembling top covers and covers, it is necessary to provide uniform gaps between the boards. To do this, before fixing the boards to the base, we lay pieces of 5 mm plywood between them.
All removable covers must be equipped with rope handles.
Tent holder, consider based on the size and location of the sandbox. The design of the canopy should not be complicated. Can be made in the form of an easily fastened cape.
On the surface parts, before screwing in self-tapping screws or screws, the places to be screwed in should be "cut off". That is, go through these places shallowly, with a drill, larger than the head of a self-tapping screw, with a diameter. This is necessary in order for the screwed screws to enter the recess. Do not stick out on the surface of the boards, sharp edges. The safety of children comes first.
After operation, a fully assembled sandbox can be additionally covered with a removed awning.
Suburban area in fact all year round requires attention and care. Adults, busy with chores, cannot devote enough time to children. Therefore, it is very important to organize the leisure of children in the country. The ideal option is to build a children's playground. And start the device children's corner better from the sandbox. DIY sandbox, even how independent element, will take little fidgets for a long time.
It is necessary to choose the place of installation of the future sandbox and materials for its manufacture, taking into account the following factors:
- Children, even those who are keen on the game, need supervision. Therefore, the sandbox must be installed so that the child is always visible to adults.
- The sun's rays can harm the health of the child, lead to sunstroke and burns, but a solid shadow is not the best way. Therefore, it is desirable to place part of the sandbox in the shade, and part in an open place so that the sand can dry out after rain.
- Drafts and excess moisture also adversely affect the health of children. Therefore, the sandbox should be located away from the water and not stand in the open wind.
- From trees, especially old ones, dust and dry leaves often pour. Therefore, in order to avoid sand pollution, it is better to install the structure away from them.
- Some plants lead to allergies, and some attract stinging insects. Therefore, you need to make sure that there are no honey plants and plants that cause allergies nearby.
- Well-crafted wood and reliable fastenings will help to avoid splinters and injuries.
- Hard materials such as stone, brick or iron can also cause harm, so it is advisable to stop using them. And of course, you need to make sure that there are no sharp corners, nails, cords, and so on.
In addition to the entertainment function, sand games perform a developing and psychological one. Soft bulk material calms and liberates the nervous system, promotes the development of creativity, fine motor skills hands, perseverance.
Different types of sandboxes: pros and cons (table)
| Classification parameter | View | Description |
| Design features | open sandbox | Typical simplest design, which performs the main function - playground |
| closed sandbox |
|
|
| Material | Wood |
|
| Plastic |
|
|
| Other materials | To this day, other materials are used to make sandboxes: brick, stone, metal. But these materials do not guarantee the safety of children. Hard, sharp surfaces increase the risk of injury. | |
| Type of allocation | advanced | The sandbox can be deepened into the ground, which is very effective for strengthening the foundation. In this case, drainage with a thickness of about 15 cm is necessary in order to avoid the accumulation of moisture. Then it is covered with agrofiber or a dense film, in which holes are made every 10 cm. Such a base will prevent grass germination, the appearance of insects and sand mixing with the soil. |
| uplifted | This design is installed on concrete base or grass. It is necessary to provide that even the smallest child can independently climb into it, for which low sides 380-400 mm high are made, which are half covered with sand. | |
| Configuration | Figured sandboxes | Constructions in the form of cars, boats, flowers, animals, and so on, serve as an additional game detail. |
| Game centers | The simplest example is a stump sandbox. The child can not only play with sand, but also run around the structure itself. |
Photo gallery of options
You don't have to stick to the traditional square shape 
Usage car tires 
It is necessary to protect the child from the sun's rays: a bright large umbrella will help 
The lid will help protect the sand from debris and moisture. 
The bright cover transforms into comfortable seats, thus adding a place to relax 
Easier to use, but more difficult to manufacture, solid lid version 
It can also serve as a separate game element 
Such a sandbox allows the child not only to play with sand, but also to walk along the sides, to warm up a little 
Typical sandbox - easy to manufacture 
To protect children from the sun, you can make a canopy 
It will also protect the sand from dirt. 
The original boat will please your child 
Another version of the sandbox in the form of a ship
Preparatory work
Given all of the above, it is more convenient and practical to make an in-depth wooden sandbox with a lid.
Drawings and dimensions of the children's sandbox
Initially, you need to decide on the size of the future design. If there are a lot of children and there is enough space on the site, then you can make a large sandbox 2x2 m in size. For one or two children to play, it is quite enough to make a square structure 1.5x1.5 m in size.
Despite the simplicity of the design of the future sandbox, it is better to have a visual diagram in front of your eyes. Thus, you first need to draw a drawing that will help you determine the right materials, correctly calculate the dimensions and quantity.
Looking at the drawing, you can see that the side boards on both sides should be slightly longer in order to form the correct closed angle.
How to choose material
Consider the following facts:
- Tree tree - discord. The durability of the structure may depend not only on the quality of processing, but also on the type of wood: pine, linden or larch are less susceptible to decay.
- The sides of the future design must withstand heavy loads. To ensure strength, it is necessary to use boards with a thickness of at least 30 mm.
- Sanding and sanding already assembled structure extremely inconvenient. It is advisable to grind the prepared parts well before assembly and treat with an antiseptic, which will avoid unprotected places. It would be prudent to paint the iron hinges in advance too.
- Most importantly, do not forget what is inside. The sand must be clean, free of foreign impurities, well sculpted. Therefore, it is better to give preference to river or quartz sand, after sifting it through a fine sieve, which will help get rid of dust, possible insects, and foreign objects.
Materials and tools (for a structure measuring 1500x1500 mm)
When purchasing materials, the presence of a foundation cannot be discounted. To build the foundation you will need:
- expanded clay, small stones or river pebbles for drainage;
- agrofibre, dense polyethylene or plywood sheet.
The basis of the sandbox is a frame with sides of 1500x1500 mm. To make a frame you will need:
- timber 50x50x450 mm (for corner elements) - 4 pieces;
- beam 50x50x1000 mm (for strengthening corners) - 1 piece;
- board 30x150x1500 mm (side walls are short) - 4 pieces;
- board 30x150x1560 mm (side long) - 4 pieces;
- sealant - 1620mm;
- self-tapping screws 45 mm - 50 pieces.
A transformer cover will be attached to the finished frame. For her, you need to prepare the following materials:
- board 20x125x1560 mm - 12 pieces;
- timber 30x30x250 mm (for fastening the seat) - 4 pieces;
- timber 30x30x450 mm (to strengthen the back) - 4 pieces;
- loops (canopies) 40 mm - 12 pieces;
- self-tapping screws 45 mm - 50 pieces;
- self-tapping screws 25 mm - 60 pieces.
For processing and registration you need:
- wood preservative;
- wood primer;
- paint or varnish for coloring.
The materials are ready, but without the tools, the process will not budge. Therefore, it is necessary:
- roulette;
- pencil;
- pegs with a rope tied to them;
- shovel;
- hacksaw or jigsaw;
- grinder or sandpaper;
- drill and drills;
- screwdriver or a set of screwdrivers.
Step-by-step instructions: making and installing a wooden sandbox with a lid
The work is best done in several stages. First of all, it is desirable to assemble the frame of the sandbox, then make the base and install the box in the prepared place. And only after that, install the cover.
Case assembly
We fasten the sanded and antiseptic-treated boards together in the form of a square with the help of corner elements - long bars, not forgetting to pre-outline and drill holes for self-tapping screws.
If ordinary insulation is glued between the first and second tiers, the boards will fit closer to each other and the sand will not spill out into the cracks.
To avoid spilling sand through the cracks between the boards, it is advisable to glue the usual insulation
To give greater strength to the future sandbox, you need to securely fix the corners with the help of additional bars.
An additional bar attached diagonally will add reliability to the structure
The ends of the corner bars, approximately 15 cm long, will be in the ground, so they must be covered with drying oil, bitumen or used machine oil. Now the frame of the future sandbox can be carefully transferred to the installation site.
The frame of the future sandbox is ready for installation
Foundation construction and frame installation
The site, selected taking into account all the tips and recommendations, is leveled and cleaned of debris. For more accurate marking, it is necessary to add 15–20 cm to the dimensions of the future sandbox on each side. We make markings with the help of pegs with a rope stretched over them, checking the correctness of the angles.
We remove the top layer to a depth of about 20–25 cm, making a slight slope towards the center. This is necessary so that the water that gets into the sandbox does not accumulate, but falls into the drainage. In the center we make a hole with a diameter of about 50 cm and about the same depth. We fill it with material prepared for drainage.
Then it is necessary to pour a five-centimeter layer of sand and carefully compact it.
On the resulting "pillow" lay the base itself, which can be from different materials. The main thing is not to forget to make holes in it at a distance of about 10 cm from each other, again to prevent the accumulation of moisture.
We install the finished frame on the resulting base. Now you can proceed to the main stage.
Mounting the cover that transforms into seats
We thoroughly fasten two boards on each side to the sides. Then we proceed to the assembly of the moving parts of the cover. To do this, we fasten the remaining boards in pairs with the help of bars.
The elements obtained from the first pairs will serve as the seat, and the elements with long bars will serve as the back. The protruding parts of the beam will act as a support, preventing the back from leaning back.
We attach the “seat” element to the firmly screwed boards with the help of three loops located at the same distance from each other. In this case, the hinges should be on top, and the bars connecting the seat boards should be on the bottom.
We attach the back to the seat, also with the help of hinges, not forgetting that this time the hinges “look” inside the box, and the bars are outside.
In this build, final stage quite problematic, because the part of the back has to be screwed in fact by weight. There is another way. First, fasten the back and seat together, and only then put them on top of the box and attach them to the rigidly attached boards.
Attention! To avoid possible injuries, it is important to "drown" the hats of the screws. You should also check that the lid opens and closes easily.
Finishing
So, the sandbox is ready! Now it is desirable to smooth out possible corners with sandpaper or a grinder. After that, even if all the wooden and iron parts have already been processed, it is better to go through the antiseptic again.
You can simply varnish the resulting design, but it is best to paint. And here fantasy comes to the rescue. Do not forget that this is a playground for children. And the kids love it bright colours. Color the sandbox with different colors. Additionally, you can draw patterns, funny pictures by hand or apply through a stencil. The main thing is that the children are happy, and they feel comfortable in the new sandbox.
To prevent small builders from spreading sand throughout the site, it is better to make a separate path to the sandbox.
Video: do-it-yourself transformer sandbox making workshop
It is easy to please a child by making a bright, beautiful sandbox with your own hands. It doesn't matter if it's a simple sand box or an interesting design. The main thing is that the sandbox is pleasing to the eye, safe and comfortable. And then the child will receive incomparable pleasure. And if the children are happy, then the parents are happy.
The construction of a full-fledged children's playground begins with the sandbox, consisting of many elements (slides, swings, houses), which will be added as the child grows up.
According to parents, the sandbox is a place for games where you can keep your child busy for a long time. Psychologists say that the sandbox for children plays an important role: hand motor skills develop, creative abilities are formed, perseverance and patience are manifested.
Before you figure out how to build a children's sandbox in the country, you need to familiarize yourself with what types, types there are and choose suitable option for specific conditions.
Types of children's sandboxes for summer cottages
Sandboxes for children come in two varieties:
1. By design features:
- open sandbox (easy to manufacture design);
- closed sandbox. Popular among users because it allows you to protect the sand from: debris, rain, wind, animals. In addition, a children's sandbox with a lid protects the sand from weathering, allows you to store toys under the lid (children's equipment: bait, scoops, shovels, rakes, etc.), and can also serve as an additional playground (if it transforms into a table and chairs ).
2. According to the material of manufacture:
- plastic, metal, wood
Each of the materials has its own advantages and disadvantages.
plastic sandbox
It does not overheat in the sun, has a compact size, is lightweight, convenient to move, transport, and during the absence it can be hidden in a farm building or garage. Among the shortcomings - instability to ultraviolet radiation, high cost.
metal sandbox
Provides long-term use, but is not safe for children, and is also prone to corrosion and labor-intensive to manufacture.
wooden sandbox
The best option, because the tree is environmentally friendly, safe and affordable.
Therefore, consider how to build a children's sandbox out of wood - independent technology using improvised materials (means). Let's start with an open one, since this is the most easily implemented option for beginners with no building experience. Production will take only a few hours, and with a competent drawing, the cover can be attached to it at any time.
How to make a sandbox with your own hands - step by step instructions
Stage 1 - Drawing of a sandbox made of wood
Despite the fact that the design is simple, the detailed diagram of the sandbox allows you to rationally calculate the amount of material and choose the right place for installation.
Often a sandbox made of wood is a square of a given height, protecting the sand from spreading.
Sandbox drawings (for a simple design) are shown below.
The design can be more complex: including chairs, benches, tables, a lid, a roof, a slide, etc. or a sandbox made in the form of a car (car), a boat-ship, a house-castle.
The diagram below gives an idea of what the sandbox consists of in the form of a machine (sandbox machine).
In any case, the functional purpose of the basic structure is the same - a fence that protects the sand.
Advice. When planning the construction of a sandbox, you should consider how many children it will be designed for.
Stage 2 - Material for the sandbox
The table lists building materials with dimensions and quantity for the manufacture of a simple sandbox with dimensions of 1500x1500 mm, 300 mm high.
| lumber | Purpose | Quantity | Note | |
| Bar 50*50*450 | corner element | 4 things. | Beam 150 mm. treated with an antiseptic | |
| Board 30*150*1600 | Side walls of the sandbox | 8 pcs. | Carefully sanded and coated with a primer for wood. | |
| Board 30*150*1600 | Sides for sitting, folding toys, etc. | 4 things. | Sanded and primed with wood primer. | |
| Wood screws, 45 mm. | For fastening | 50 pcs. | ||
| Geotextile | bottom | 2 rolls | Can be replaced with foil | |
| antiseptic | For wood processing | |||
| Primer for wood | For wood protection | |||
| Dye | For coloring | 1 can (1 liter) | oil or acrylic | |
| For a closed sandbox (with a lid), you will additionally need | ||||
| Bar 30*30*1600 | 2 pcs. | The beam is sawn into pieces depending on the width of the cover | ||
| Board 20*125*1600 or plywood, 18 mm. | 12 pcs. sheet | |||
| Piano loops (canopies) | 4 things. 8 pcs. |
for hinged lid for convertible cover |
||
| Pens | 2 pcs. | |||
The material was prepared for the site www.site
- the length of the beam depends on the height of the sandbox, which, in turn, is determined by the age of the child. The height of the sandbox should be such that the child can step over it. Optimal Height- 300 mm (150 mm remains for digging in and fixing the structure).
- the thickness of the boards must be at least 30 mm. This will ensure sufficient structural strength and protect the tree from cracking.
- plywood is indispensable in the manufacture of complex structures, such as, for example, a sandbox in the form of a ship (boat). Shaped products of a round, oval shape are made from it.
- boards are best processed before installation. Thus, there will be no unprotected parts of the lumber.
Tools: saw, grinder, drill, drills, screwdriver, pencil, tape measure, level, pegs and rope, paint brushes.
Stage 3 - Marking the place for the sandbox
a place for installation is selected. With the help of stakes and a rope, the outer perimeter of the structure is indicated;
inside the outlined square, soil is selected to a depth of 300-400 mm. You can do without this and pour sand on top of the ground, but it will quickly become unusable, as it will mix with the ground during the game. In addition, ants and other insects can start in it;
drainage is arranged - a tightly compacted cushion of crushed stone / gravel and sand. The pillow will allow water to flow freely into the ground, and the sand to dry faster. Additionally, users recommend laying geotextile, it does not interfere with the flow of water, but protects the sand from below from insects or moles.
Advice. When using polyethylene, you need to drill holes in it for water to drain.
Many users complain that puddles appear around the sandbox after rain. This is eliminated by arranging a pillow and outside the perimeter of the sandbox - drainage laid 400-500 mm. around the sandbox will allow the water to drain down quickly.
Stage 4 - Making a children's sandbox with your own hands
Brief construction technology:
- stakes are driven in at the corners marked with a rope - the support of the future sandbox;
- on each side, one board covered with an antiseptic is installed;
- then the second row of boards is nailed;
- to equip the seats, processed boards (2 on opposite sides, 4 on each side) or plywood corners are horizontally installed on top of the structure - the most budget option.
Advice. It is important to ensure that the heads of the self-tapping screws are securely recessed into the wood and do not cause injury.
The second option is how to make a sandbox out of wood
The method involves a slightly different order of work, namely: first, the manufacture of the sandbox, then the preparation of the installation site and the further installation of the sandbox. This option is convenient when the work is carried out together, because. the design, although light, is rather bulky and it is inconvenient to install it alone in this order.
Step-by-step instructions for making a sandbox with your own hands (master class) are shown in the photo.
Stage 5 - Making a lid for the sandbox
Since a children's sandbox with a lid for giving is a more attractive option, let's consider how to make a lid for a sandbox.
by the most simple option there will be a removable cover, which is a shield knocked together from boards, but its significant drawback is the need to remove the cover before the game.
Therefore, it is more expedient to make a design with two doors that transform (open and fold) into seats. The photo below shows two options for a sandbox lid - folding and transforming into a seat. Please note that the two extreme boards on both sides are stationary. They are securely fixed, this will allow a child and even an adult to sit on the lid without fear of breaking it.
Sandbox option with awning (soft cover, rolled up)
Stage 6 - Construction of a roof for a sandbox
Given that children want to play in the sand at any time of the day, care must be taken to protect them from direct sunlight. To do this, you need to install a visor over the sandbox. It can be a beach umbrella or a fixed roof made in the form of a fungus / canopy.
Stage 7 - Sand for a children's sandbox
How to choose sand for a sandbox?
It should be noted that GOST (18322-78 (ST SEV 5151-85) and GOST R 52301-2004) regulate the requirements for the maintenance of playground equipment, but do not contain recommendations regarding sand, except that certificates must be provided when selling sand.
However, users have determined what kind of sand is needed for the sandbox and have the following requirements for it:
- absence of foreign matter/objects;
- good flowability;
- dustlessness. Small particles of sand (fractions less than 0.1 mm) can enter the lungs of a child. To eliminate them, sand is usually washed and dried or sifted through a very fine sieve;
- formability (it’s good to mold into beads);
- humidity. The sand must be dry;
- hygiene. Sand should not contain living creatures (bugs, spiders, worms, etc.).
What kind of sand is best for a sandbox
When choosing sand it is better to give preference to:
- river, not career. It is purer in itself;
- sifted, not containing foreign objects;
- quartz sand - perfect option. It is clean and molds well.
Ready-made sand for children's sandboxes can be bought at the store. The presence of a quality certificate guarantees its purity and the absence of impurities.
How much sand do you need in a sandbox?
In order to fill a sandbox measuring 1500x1500 mm. you need to prepare about 0.5 cubic meters. sand.
The average price per bag (25 kg) of sand for a children's sandbox is shown in the table.
DIY children's wooden sandbox - video
How and where to install a children's sandbox
In order for the sandbox to serve for a long time and not pose a threat to children, you need to follow a few recommendations when making and installing it:
- do not use metal elements;
- do not leave boards unpolished;
- provide shade;
- place in a well-visible place;
- ensure the absence of thorny shrubs, honey plants and allergens;
- use high-quality wood and other building elements;
- provide secure fastening;
- lack of electrical wiring, hoses, pipes, etc.
Conclusion
A wooden sandbox with a lid or an open one is an opportunity not only to please the child, but also to show their creative abilities. And a sandbox in the form of a table, car, hexagonal or round will not only please the child, but also allow you to decorate country cottage area extraordinary, creative design.