slopes 

MDF or chipboard, which material is better? Furniture made of chipboard or MDF: which is better to choose? Chipboard kitchen quality characteristic

1. Chipboard ( chipboard) - made from wood shavings and sawdust glued together with formaldehyde resins.

The advantages of chipboard are its low cost, good strength - chipboard perfectly holds screws and nails, water resistance. Among the shortcomings, it is necessary to note the binder of the plate - formaldehyde resins, which do not have the best effect on human health. There are 2 emission classes of formaldehyde resins - E1 and E2. E1 - more eco-friendly material, the amount of resins emitted into the atmosphere by it is much lower than that of class E2 chipboard, therefore the latter is prohibited in the production of children's furniture.

Almost all economy-class furniture is made from chipboard. When buying furniture, pay attention to the fact that the seller has certificates of compliance with GOSTs and sanitary and hygienic requirements - this way you will protect yourself from buying furniture with a high resin content, because in certified furniture all indicators are within the acceptable range, and therefore do not threaten health person.

Chipboard is a very hard material, therefore it does not allow milling and figured processing.

2. LDSP (laminated chipboard)- Chipboard, finished with a film based on polymers. The film is paper impregnated with melamine resins, so you can often come across such a term as "melamine board". Chipboard can be washed and cleaned - it is moisture resistant. He is also not afraid of high temperatures. Its advantage, in addition to all of the above, is its excellent ability to imitate various textures, most often - imitation of the texture of wood.

3. MDF (from the English. Medium Density Fiberboard)- These are very small sawdust (wood dust), glued together. Larger residues are used in chipboard. The main difference between MDF and chipboard is the binder, MDF contains much less formaldehyde resins. In high-quality MDF, sawdust is glued together with paraffin and lignin (a substance that is part of natural wood). Such production makes MDF absolutely harmless to humans. Unfortunately, the production of plates using this technology is not properly established in the territory of the Russian Federation, which explains its rather high cost.

MDF, compared to chipboard, is a more environmentally friendly material. MDF is stronger than wood, and, in addition, it is very plastic - it can be milled and curly parts can be made from it. Pay attention to MDF facades - they are usually decoratively processed.

4. Fibreboard (Fibreboard)- this is a well-known hardboard, a thin plate that is used as the back panel of cabinets or the bottom of drawers. It is made like MDF from wood dust, but the particles are steamed before pressing. On the surface of fiberboard, a mesh pattern is clearly visible. As a rule, one side of the fiberboard is laminated to match the texture of the entire product, and the second side, facing the wall, is left untouched. The main advantage of fiberboard is its low cost. This material is indispensable where it really has a place - the cost of a product entirely made, for example, from MDF, will be higher than that with a back panel made of fiberboard. Therefore, in order to significantly reduce the price of furniture, where the design allows it, it is better to use fiberboard.


IMPORTANT: pay attention to the norms of formaldehyde content in cabinet furniture. The Russian standard GOST 10632-89 establishes compliance with class E1, where the formaldehyde content is 10 mg per 100g. dry mass. Norm E2: - up to 30 mg per 100 gr. Products that comply with E1 standards are safe for health. In addition, the better the furniture made of chipboard and MDF is processed, the better the edges, the fewer cracks and cracks, the safer the furniture.

5. And finally, tree or solid wood. Before proceeding with the manufacture of solid wood furniture, the wood must be dried and processed. by special means, otherwise high humidity and temperature fluctuations, frequent in the kitchen, will inevitably lead to its deformation. Wood is an expensive pleasure, therefore, most often, a cabinet body is made from it, and, for example, veneered chipboard is used as facades - that is, chipboard trimmed with a thin sheet of wood.

Most often, oak, pine, cherry, beech, walnut wood is used as an array for the production of cabinet furniture. All these materials differ in strength. You should not use "soft" pine for the manufacture of children's furniture or hallways, it is better to prefer harder materials. hardwood. Although, pine, of course, has one big plus - low cost.

At wooden furniture there are also disadvantages: the tree is afraid of fire and water, it is easy to damage it, it requires special care. Wood furniture is very heavy.

But, if such a factor as environmental friendliness matters to you, then, of course, solid wood furniture is your choice. The texture of the wood is unique, it exudes warmth, in addition, the wood ozonizes the air, giving it a unique aroma.

Wood is an expensive material. It is significantly more expensive than chipboard and MDF, incl. due to the complexity of production and processing complexity.


When choosing the environment for your home, it is important not only external design products. And the composition of the furniture is no less important. Chipboard is a chipboard that is hidden under the laminate of your furniture, no matter what it is outside: alder; nut; wenge. Inside under the coating of the laminate layer there will always be chipboard. Which is better - MDF or chipboard? Let's figure it out.

Pros and cons of chipboard body material

The advantages of LDSP are as follows:

  • quite inexpensive in cost;
  • covered with many types of laminate;
  • endurance to the influence of high temperature;
  • it is very easy to process in the manufacture of cabinet furniture.

The disadvantages include:

  • strong friability of matter;
  • poor retention of self-tapping screws, especially when reused;
  • nails are practically not held inside the slab;
  • service life is not more than 10 years.

When making this building material in the composition of the chips, the presence of substances that emit formaldehyde in a moderate amount is permissible. They are quite harmful to humans.

This modern material is produced in large factories from wood shavings. It is ground and mixed with resin. Subsequently sawn in the form of plates.

Which is better and stronger for beds, cabinets, laminate and other furniture

Place the panel on a flat surface before you start gluing. Chipboard must be free of dust and other possible contaminants. Clean up with a grinder. The film is gradually removed from the base. Apply gently and smooth to there are no air bubbles under the film.

Photo printing can be successfully applied to laminated chipboard. It looks very impressive.

Small chips of this material are more like cardboard. It is made by pressing fine wood dust. Mixes with resins and glue. One side is laminated. The other, wrong side, is covered with glossy plastic, paint or various kinds of films.

Advantages fine dispersion fraction ( mdf):

  • the dose of formaldehyde is minimal, within the normal range;
  • more plastic, which allows you to make furniture in different versions;
  • in the manufacture, carbamide resins modified with melamine are used, which brings the material closer to wood;
  • material can be moisture resistant, unlike chipboard, which strongly draws moisture. all about moisture resistant mdf for walls;
  • characterized by comparative strength.

For the kitchen, it is necessary that the material is not only beautiful, but also practical. Matte painted facades from Italian designers are in fashion now.

Ultra interesting options designs are now created with matte facades. Gloss is easier to maintain. It shows less contaminants. For practical people, it is better to choose furniture from glossy mdf panels. Using the advice of designers, you can successfully purchase furniture.

Choosing furniture from chipboard and MDF, the difference will be in cost and quality. However, both panels can be successfully used if you need to purchase budget furniture.

What is the difference between furniture in the nursery from MDF and chipboard

For the successful organization of a room for babies, it is important to take into account the advice of doctors. When the baby has grown out of his cozy bed. It's time to take care of the arrangement of space in his room.

For this you need pick up furniture, which will be:

  • comfortable;
  • comfortable;
  • safe.

The grown-up baby already needs:

  • a table at which he will create the first masterpieces of his work, and later - to do his homework;
  • comfortable bed;
  • wardrobe with drawers for clothes and toys.

All furniture for a children's room should be made of environmentally friendly materials. In addition, you can not put furniture in the child's room if the baby has an allergy to one of the materials from which it is made.

The first thing you need to pay attention to when choosing furniture for a nursery is the quality of the furniture. Products must be certified. The quality must be factory-made. The more modules, the more opportunities to create the perfect children's room with areas for relaxation, games and activities.

It is necessary that all furniture is suitable for the child's age. So that he can get his things or toys from a closet or table.

The chair and table should be such that the posture of the baby develops correctly.

If the size of the children's room does not allow you to place full-fledged furniture, the solution will be to purchase modular furniture- transformer. For example, the choice bunk bed contributes to the creation of personal space for each of the children. It can be fitted with a box for linen and a wardrobe.

Do not clutter up the room with unnecessary pieces of furniture. Only the necessary things. If you choose the right furniture, children will feel happy and try to complete tasks in a timely manner.

Environmentally friendly materials for facades and cases of products:

  • chipboard;
  • natural tree.

E1 is the highest security class of chipboard. If furniture for children is made from this sheet, you don't have to worry about the quality of the panels. Such material is moisture resistant. It is perfect for furniture frames and shelves. Covered with chipboard pvc film.

For the manufacture of furniture doors, MDF is better suited. This material is durable and wear resistant. Not afraid of moisture, does not deform over time. Resistant to scratches and dirt.

What to consider when choosing furniture for the kitchen from MDF and chipboard

If the kitchen is spacious, choose a large table. It can be placed in the center of the room when guests arrive. Several chairs can be placed around the table. It is good to choose oval or round tables.

Table models should be combined with the style of another kitchen furniture. For small rooms, a transformer is well suited. It doesn't take up much space when folded.

All materials from which the furniture is made must be resistant to steam and moisture. For such furniture, choose only high-quality chipboard materials or mdf.

So that they do not deform over time. By choosing glossy surfaces, you can ensure a minimum of cleaning worries. On such furniture, stains from grease and other contaminants will not be visible. Matte surfaces are more whimsical, although they are in fashion today.
Simple tips for choosing a kitchen to order.

findings

The material from which the furniture is made is also important for choosing furniture for the kitchen. The tabletop can be made of natural wood, stone and MDF. The cost of the latter material is much more affordable.

So, in order not to guess which material is better, choose a combination of chipboard and MDF, combine these surfaces and equip your home to the delight of yourself and your loved ones.

When buying furniture, an unprepared person can get confused. beautiful facades various colors and shapes and completely incomprehensible terms: MDF, chipboard. What is it, and what is furniture made of? To date, a wide variety of materials are used in the manufacture of furniture. But most often cabinet furniture is made of chipboard (chipboard) or MDF. It's hard to say which is better. You need to understand how they differ.

And they differ in manufacturing technology. Both materials consist of waste wood processing. Both chipboard and MDF are pressed wood shavings and sawdust. The difference is only in the way of gluing the elements. Despite this seemingly insignificant difference, MDF and chipboard are quite different from each other.

What is chipboard Pros and cons

LDSP, what is it? This is a chipboard, obtained by pressing wood elements with formaldehyde resin. After manufacturing, the plate is covered with a special polymer film.

This material is used to create any economy-class cabinet furniture.

Advantages of chipboard:

  1. Variety of colors. The surface of laminated chipboard can be of any color, matte and glossy.
  2. Simple care. Furniture and this material can be simply wiped with a damp cloth.
  3. Durability. With proper care and compliance with the rules of operation, such furniture will last for many years.
  4. Price. The advantage of chipboard in the first place is a low price with good quality.

Disadvantages of chipboard:

  1. Chipboard is afraid of moisture.
  2. Does not respond well to sudden changes in temperature.
  3. Formaldehyde resins are toxic.

At first glance, it seems that chipboard is not suitable for the kitchen. But it's not. With high-quality processing of the ends, such a kitchen is perfectly preserved.

Safety class

Due to the fact that the resins used in the manufacture of chipboard are quite toxic, when choosing furniture, you must check the quality certificate. There are several security classes:

  1. E0. This is the safest furniture, impurities of harmful substances are minimized. Such furniture is suitable for children's rooms. It is also used in medical institutions. Unfortunately, in Russia there is no production of furniture of this class.
  2. E1. Furniture of this class is produced by domestic manufacturers. The content of harmful resins is low and does not harm health.
  3. E2 and E3. The manufacture of furniture from laminated chipboard of this class for residential premises is prohibited in Europe. Russia has no such ban. The manufacture of children's furniture from such chipboard is also prohibited in Russia.

MDF Furniture Pros and Cons

MDF is the same wood chips as chipboard, pressed at high temperature and high pressure. only paraffin or lignin acts as a binding element instead of toxic formaldehyde. Which is much safer.

MDF has wide application due to its strength. In addition to cabinet furniture, it can be a ceiling, Wall panels and even gender.

Advantages of MDF:

  1. Strength. Compared to chipboard, MDF is several times stronger.
  2. Moisture resistance. MDF furniture is not afraid of moisture.
  3. Ability to create curved elements.
  4. Easy care.
  5. Environmental friendliness is the main advantage of MDF.

MDF is often equated with natural wood. Therefore, the price is considered the only disadvantage of this material.

For the kitchen: chipboard or MDF?

MDF kitchen

What is a kitchen? This is a humid room with temperature changes. Steam, grease, hot stove, water. For such a difficult room, it is better to choose a material that is more durable and resistant to various changes - MDF.

MDF facades are of two types:

  1. film coated. The film option is cheaper, but there is a risk that near high temperatures the film will swell and begin to move away.
  2. Painted MDF. The price is higher than film. Provided the correct color has an ideal appearance. Resistant to moisture and high temperatures. True, at strong blow paint can be damaged.

An MDF kitchen can only disappoint if the manufacturer has saved on quality. Unfortunately, it's hard to tell visually.

Chipboard kitchen

If, nevertheless, the choice fell on the inexpensive segment of chipboard kitchens, then you should pay attention to some elements:

The very best of budget options It is a combination of MDF and chipboard. In this case, the frame is made of chipboard, and the facades, on which the strongest impact occurs, are made of MDF.

MDF or chipboard for the bedroom

MDF bedroom furniture

In the bedroom, the microclimate is always favorable, there are no sudden changes in temperature, so the resistance of furniture to adverse effects is not so important. This is where safety comes first. After all, people spend a lot of time in the bedroom. Especially when it comes to the children's room, where the child spends most of his time. It is important that the furniture is safe. MDF can have various decorative coatings:

  1. The plastic coating will protect the color from fading and give any texture.
  2. The film coating will allow you to choose any color, even iridescent and chameleon.
  3. Veneer covering. Furniture with such a coating always looks good, because veneer is a wood material and has a wood texture.

Bedrooms from laminated chipboard

You should not completely write off chipboard, with a certain quality this material is not inferior to the more expensive MDF. When choosing furniture from chipboard, you should pay attention to some nuances:

Chipboard and MDF have their own advantages. Having studied the properties of these two materials, it is not so difficult to make a choice in favor of one. What better than MDF or chipboard for the kitchen? Only the buyer decides, the main thing is that the furniture is strong, durable and safe.

Modern kitchen sets are made from a variety of materials. They are presented general requirement: environmentally friendly, resistant to moisture and heat and, of course, beautiful.

MDF kitchens are very diverse.

To the fullest extent these parameters correspond to kitchens made of MDF - medium-viscosity fibreboard. durable and available material- one of the most popular in the manufacture of kitchen sets.

Advantages and disadvantages

We offer you a table that examines in detail various properties MDF kitchens - both positive and negative. With its help, you will better understand the features of the material and be able to make an informed decision about whether to buy such a kitchen.


 A variety of MDF kitchens have a lot of advantages.

The advantages of kitchens with MDF are quite extensive.:

  • The main advantage of MDF kitchen sets is, undoubtedly, the cost. The price for them is much lower than for solid wood kitchens.
  • Wide design possibilities. Most often, MDF is used as a base, finishing with plastic, acrylic, various types films. This allows you to create bright unique designs. Often MDF headsets imitate natural wood, stone, metal and other materials.
  • Excellent operational properties. High-quality MDF furniture can serve up to 20 years without loss of properties.
  • Ease of care: MFD is not capricious and does not require special detergents. True, it must be taken into account that the coverage may be more demanding.
  • Flexibility. With the help of MDF panels, you can create headsets of a wide variety of shapes.

 It is important to carefully choose the kitchen, so as not to be disappointed in the purchase.

However, get ready for the fact that you will have to face a number of disadvantages.:

  • Unscrupulous manufacturers under the guise of MDF can sell headsets made of chipboard- looser and cheaper material.
  • If the manufacturer has saved on the quality and quantity of glue, the headset may crack and dry out.
  • Headsets pasted over with a film quickly fade in direct sunlight.
  • If the ends of the headset are not finished with plastic or aluminum, they can swell in a year due to excessive humidity in the kitchen.
  • Quality headsets exterior trim, for example, with acrylic panels, can cost you a considerable amount.

Thus, it is obvious that MDF kitchens are highly reliable only if they are made by a conscientious manufacturer and meet quality standards.


 High-quality MDF is one of the most reliable materials.

Often the question comes up: which is better for the kitchen - MDF or chipboard? It can be answered unambiguously.

MDF kitchens are environmentally friendly and durable, while laminated chipboard is not very suitable for use near stoves and other household appliances. The material is too loose, so it quickly deforms. In addition, it swells when exposed to moisture, and when heated, it can release formaldehyde into the air - toxic substances that are harmful to human health.


 We recommend not to save: chipboard is not only worse than MDF, but also more dangerous to health.

Types of MDF kitchens: facade finishing methods

As we already wrote, MDF kitchens are often finished additional materials. It can be veneer, laminate, plastic, film ... In addition, there are various ways decorative treatments that can give the kitchen a radically new look.


 There are many options for MDF kitchens.

There are a huge number of options. We propose to consider each of them in more detail.

The most inexpensive version of the MDF kitchen set - with PVC film facades. Affordable and pretty kitchens look attractive and are very popular. The film can be painted in any color, drawings are applied to it, giving it the appearance various materials- stone, wood


 High-quality PVC film can reliably imitate wood.

However, it should be noted that such a headset must be carefully trimmed around the edges - install a plastic or aluminum edge. Otherwise, the film will begin to flake off, go bubbles. In addition, it should not be placed in direct sunlight - the coating fades quickly under the influence of bright light.

Wash the film with a soft sponge and non-abrasive detergent to avoid scratches. Also, make sure that the product does not contain chlorine or alcohol - they will Negative influence for color fastness.

The most expensive option for MDF headsets - enameled. A special enamel paint is applied to the facades in several thin layers. This coating is highly resistant to moisture, dirt and even mechanical damage. True, there is one caveat - in no case do not wipe the enameled surfaces with hard sponges - they will leave ugly scratches.


 Enameled kitchens - stylish and modern solution.

Most often, such kitchens are glossy. The matte version will cost you more, because it requires special processing with a special composition. However, it is easier to care for: on a matte finish, dirt is not as noticeable as on a glossy one.

A more affordable replacement for enamelled MDF kitchen facades - installation of acrylic or plastic panels. In this case, you also need to ensure that the edges are covered with aluminum or plastic frames. Otherwise, the panels begin to move away, moisture and dirt accumulate under them. This causes the headset to deform and it quickly goes out of service.


 Acrylic panels can look very diverse.

Acrylic and plastic panels in MFD kitchens is very simple: just wipe them regularly with a soft cloth. Hard brushes often scratch the finish, but scratches are not difficult to remove with polish.

If you prefer classic or eco-style kitchens, consider veneered MDF kitchens. Modern veneer authentically imitates natural wood, has high aesthetic and performance characteristics. The material is non-toxic when heated and does not emit harmful substances. In addition, it tolerates operation well at temperature extremes and high humidity.


 The veneered set looks like a solid kitchen.

Caring for a veneered MDF kitchen is not particularly difficult - just wipe it regularly from dirt. Sometimes there are recommendations to use a polish. However, we do not recommend doing this: polish attracts dust and debris, so cleaning a kitchen treated in this way will be much more difficult.

Sometimes MDF kitchen sets are trimmed laminate. Durable and lightweight, it is well suited for use in the kitchen. You need to take care of it in the same way as for veneer. However, keep in mind that this option is not suitable for radius kitchens. Laminate is not very flexible, so it is used only for straight, L- or U-shaped kitchens.


 Laminate is another popular MDF kitchen cladding.

Finishing option is gradually leaving the market MDF facades with paper-resin film. Such facades look very beautiful… Approximately the first six months. Then the coating begins to peel off even with the most gentle care. Their only advantage is their affordable price. Therefore, we do not recommend such headsets for purchase.


 Ditch the film in favor of modern materials.

Regardless of which type of finish you choose, contact trusted furniture companies. Unscrupulous manufacturers, trying to save money, often use not quality materials and consumables. This causes the MDF kitchen to break in the first months of use.

Using non-certified materials can be downright dangerous - they often release toxic substances into the air. Therefore, we recommend that you ask for certificates for each component of your kitchen - this will protect your family and be able to guarantee the high quality of the purchased kitchen.

Decorative finishing of facades

Diverse decorative ways finishes make the design range of MDF kitchens even wider. We propose to study the techniques that are used to design headsets in the following photo selection.


 A wide choice of decor is one of the advantages of MDF kitchens.
Printed MDF set for a modern kitchen.

Pay attention to the little things: beautiful handles can make an MDF set really luxurious, but be uncomfortable to use. In addition, too heavy elements often put too much stress on the MDF. Because of this, the base of the headset cracks and deforms.


 Pay attention to details.

As for the shape of the headset, it can be any - straight, radius, g- or p-shaped. MDF takes any form, so be guided by your preference here. However, keep in mind that a straight headset is the most affordable option, while the cost of a radius MDF headset can reach one hundred thousand rubles.


 The unusual shape of the headset looks impressive, but it will be quite expensive.

Whichever option you decide on, we recommend that you familiarize yourself with the list of our recommendations. They will help you purchase high-quality and durable MDF kitchen:

  • The weak point of any MDF headset is the edges of the facades. Therefore, no matter how much you want to save money, choose kitchens whose edges are finished with aluminum, in extreme cases - with melamine plastic. Otherwise, your headset may quickly deform under the influence of moisture and temperature changes.
  • Since resins are used in the production of MDF kitchens, pay attention to the material safety class.
  • Headsets marked E1 are considered optimal for use in the kitchen. They do not release toxic substances into the air when heated. But furniture marked E2 cannot be placed near the stove - they will evaporate formaldehyde.
  • Pay attention to models with adjustable legs. They will allow you to install the kitchen exactly horizontally, which will prevent kitchen utensils from sliding on the countertop. This is especially true for MDF kitchens with film facades - moisture can accumulate under the film, due to which sooner or later the set will begin to deform.
  • Even if the facades are not treated with the most durable material, make sure that the countertop coating is resistant to mechanical damage.
  • Take the time to take care of your headset. Even the simplest materials, if used improperly, quickly fail.

 A high-quality MDF kitchen will serve you for many years.

And, of course, do not forget about the main rule - never buy suspiciously cheap MDF headsets and do not order them from unverified companies. When choosing an MDF kitchen, carefully read the reviews - they will tell you where you can buy a reliable and durable kitchen.

How to care

A kitchen made of MDF will serve you for many years only if you take proper care of it. Depending on the type of facade covering and countertop, recommendations may vary slightly. You can read more about each type of finish in the corresponding section of our website.


 Proper care- a guarantee of the durability of the MDF kitchen.
  • Use soft, lint-free fabrics. They will not leave streaks on a glossy surface and will not scratch any type of coating.
  • Refuse aggressive detergents: they can change the shade of the facade or countertop. It is best to use dishwashing detergent or plain liquid soap.
  • Try not to use polishes. They attract dust and grease, and it is much more difficult to wash the treated surface than a clean one. The exception is plastic facades, which can be treated with a special polish to hide scratches.
  • Dry the surface immediately after cleaning. If the coating is not airtight, then moisture penetrates under it, and the MDF sheet can swell and the entire kitchen is deformed.

By following these rules, you will ensure the durability of your MDF kitchen, regardless of the type of coating. We hope our tips will help you choose the perfect headset, comfortable and beautiful!

Kitchens from MDF: photo in the interior

We bring to your attention a selection of various kitchens from MDF.



































































When buying furniture for the home, often a difficult task arises: what is better to choose - chipboard or MDF. The plates are outwardly very similar, products made from them look approximately the same and at first glance there is no obvious difference. Meanwhile, there are very differences: in terms of placement, durability and safety. And without having an idea about the features of each material, it will not be possible to make the best choice.

But everything is not as difficult as it seems. In this article we will tell you how chipboard differs from MDF, about the advantages and disadvantages finished products. And also, you will learn what should be taken into account without fail.

And for those who have no time to understand all the subtleties furniture production, at the bottom of the page there is a hint picture "LDSP or MDF: which is better?". It indicates the main differences between furniture made from these materials and a suitable area of ​​​​the apartment for placement.

So:

Chipboard and MDF - what's the difference?

chipboard

Laminated chipboard, of course, it would be more correct, of course, chipboard, as industrialists call it, but the name without the letter "t" has taken root among the people. It is produced from woodworking industry waste - sawdust, by hot pressing with the use of formaldehyde-based adhesive resin.

Chipboard board is laminated with melamine film and cut into pieces. Since the material absorbs moisture well and swells, the ends of the facades are sealed with an edge. This technology allows not only to prevent water from getting inside, but also to reduce the release of formaldehyde vapors to a safe minimum.

Russian GOST, adopted in 2010, obliges to comply with safety standards and allows the use in the furniture industry only of laminated chipboard of emission class E1 and E0.5. Moreover, this standard allows the production of chemically safe children's furniture. You can learn more about the current regulation.

Pros and cons of furniture made of chipboard:

  • Obvious Advantage is the price of the final product. Even with a modest budget, you can quite decently furnish an apartment.
  • Flaw- the possibility of moisture ingress between the joints of the coating. It is necessary to remove water from problem areas in time.
  • And one more- the material is most vulnerable in the places where the fittings are attached. Furniture made of laminated chipboard is undesirable to often disassemble and assemble. With the constant screwing and unscrewing of the screws, the plate crumbles and the holes increase in diameter.