Rules for using a gas boiler Ariston. Wall-mounted gas double-circuit boilers Ariston are an excellent choice for both space heating and water heating. Spare parts for gas boilers Ariston

18.10.2019

Double-circuit gas appliances make our life more comfortable and enjoyable. They are quite practical to use, suitable for heating country houses and small apartments. They are used for heating industrial or warehouse buildings, the area of which is not more than 500 sq.m.

The advantages of Ariston boilers are that, in addition to heating buildings in winter period, they heat the water used in the home all year round. It is quite convenient and does not require the installation of additional equipment.

General characteristics of Ariston boilers

The description of Ariston gas units must begin with the characteristics of their main part - the burner. This element is used to burn fuel and to transfer thermal energy to the heating system.

Types of boiler burners:

ordinary
modulation

The modulating burner is more convenient to use. It provides for automatic power control depending on the temperature of the device.

According to the type of removal of combustion products, burners are divided into:

closed type
open type

Units with a closed type burner are safer to operate. The combustion products of natural gas in this case do not enter the room. Use is not required. A coaxial pipe is simply connected to the device and brought out.

Design coaxial pipe provides for the presence of two layers, which ensures the simultaneous removal of waste and the flow of air from the street into the burner.

Equipment with an open burner provides for the mandatory use of a chimney to remove combustion products.

Technical data of Ariston gas appliances

Ariston boilers are used for heating and heating water, that is, they are double-circuit. Each modification has its own characteristics, but the common type of fuel is gas.
The gas combustion chamber can be either open type or closed. In the presence of a chimney, units with an open chamber are used. And in apartments of multi-storey buildings, where there are not always chimneys, they use equipment with closed camera combustion.
Power. Using this indicator, the gas consumption required to heat the room is calculated.
Compactness. wall appliances used in small narrow rooms. Floor-standing units used in industrial or warehouses are heavier and require more installation space.
The presence of a control unit. This element is indispensable when turning off the water, a sharp decrease in gas. In case of any malfunctions, the unit will immediately turn off the device, which will prevent damage. It can also save fuel consumption.

Ariston boilers are used for heating and water heating, that is, they are double-circuit

Characteristics of Ariston boiler models

A distinctive feature of Ariston boilers is their high quality. After all, the name of the company is translated from Greek as “the best”.

Its products are especially popular among middle-income consumers. Gas boilers of this brand are purchased for space heating up to 500 sq.m. The company's products are universal. The transition to liquefied fuel is carried out only by replacing the burner.

Practical to use are dual-circuit wall-mounted gas appliances. It is represented by three lines, each with its own modifications.

For all modifications of boilers, the common is:

small size.
innings hot water, in the absence of its centralized supply.

Different modifications differ in structure, the common thing is their low cost and high-quality performance of parts.

Basic equipment of units from Ariston:

double .
electronic control module .
carbon monoxide control.
support of the microclimate in the building or in a separate apartment.
control of water freezing inside the system.

Let's take a closer look existing species Ariston equipment.

Ariston Genus

Are issued with the double heat exchanger. All modifications are double-circuit and are mounted on the wall.
This model is considered the most functional of all Ariston devices. It has an LCD display, a control panel with buttons. Ariston Genus can be configured to work offline for a whole week.
The display shows basic information about the status of the device and a list of possible errors. The burner is modulating, that is, fully controlled by electronics. This function increases the comfort of using this model of gas appliance, due to the minimum control by the consumer.

The Ariston Genus line includes Evo and more expensive Premium models.

The Evo model is a two-circuit gas appliance with a burner of both types: open and closed.

Genus Premium condensing boilers. They are used for heating residential buildings and commercial buildings. Power range from 24 kW to 35 kW.

Ariston Clas

Small size device.
This is a boiler with two circuits and a graceful appearance. The reduced dimensions did not impair its functionality in any way.
Expansion tank for 8 liters. Hot water is heated fairly quickly

Existing modification:

Evo is available in open and closed combustion chambers. Power with an open burner - 24 kW, with a closed - 24 - 28 kW.
Premium Evo condensing type appliance. Has advanced comfort and freezing functions
Premium simple condensing unit.

Ariston Egis

Installed mainly in rooms up to 200 sq.m.
The most common Ariston gas appliance model in our country. It heats water with a stainless steel heat exchanger, and a copper heat exchanger is used for heating.
The compact device, differs in profitability and can be used under complicated weather conditions. For example, at sharp sub-zero temperatures.
The device is equipped with a modulating gas burner , which allows for electronic control over the operation of the boiler.

This model is adapted to work in harsh climatic conditions. Normally withstands changes in gas pressure. The device is equipped with a collector into which condensate flows. This ensures operation at temperatures below 50 degrees.

The cost of boilers Ariston

The average cost of Ariston Genus boilers is 54,000 - 72,000 rubles, Ariston Clas - 25,000 - 34,000 rubles, Ariston Egis - 27,000 - 34,000 rubles

Choosing a gas appliance for heating

Ariston products can be found in the catalogs. There are many models of gas appliances. The main mistakes with the wrong choice of the unit are made from a lack of information. Therefore, before visiting the store, you should familiarize yourself with the basic tips for choosing a wall-mounted gas appliance.

When choosing a boiler, consider the following points:

The size of the kitchen, as the place where the heating device is most often installed. In the store, the choice begins with consideration overall dimensions apparatus and select it individually for your kitchen.
Then they go to the technical data and study the type of water heater in the device. If in a family a large number of person, it is not recommended to purchase a boiler with.
In this case, it is more rational to purchase a boiler with storage tank for hot water and choose equipment for the amount of water that you will need for everyday use.
Evaluate the combustion chamber gas equipment. It is closed and open. It is recommended to choose a boiler with a closed chamber, because it is safer to operate. The presence of a chimney is optional, which is important in multi-storey buildings. It is enough to buy and bring a coaxial pipe to the street.

It is impossible to name at least one property owner who would not dream of cozy home. In order to keep the rooms warm, today there is no need to install stoves that consume a huge amount of firewood and coal. Such equipment remains in the past. He is being replaced heating appliances which are available to almost all segments of the population.

Solution of the problem

These technical innovations are characterized by their compact dimensions and high efficiency. The advantages are complemented by the absence of the need for the constant presence of a person and ease of operation. Almost all processes of such devices can be automated. Therefore, when designing a dwelling and reconstructing an operated house, experts recommend paying special attention to the heating system.

It is most often based on heating boilers, from the correct choice and competent installation of which the heating efficiency will depend. Among other things, it is important to study the issues of minimizing heat loss and efficiency. Among others, Ariston boilers are on the market today, reviews of which you can read below.

Overview of the most popular models: EGIS PLUS 24 CF

This equipment costs consumers 48,300 rubles. This boiler is a unit that is equipped with an open combustion chamber. "Ariston 24" is a design that has a stainless steel burner, protected from frequent inclusions. This device belongs to the enclosure protection class X4D.

On the outer panel there is a display that allows you to simplify the control and change the operating parameters. This Ariston boiler, reviews of which are only the most positive, has the option of freezing protection and blocking the circulation pump. You can not be afraid that scale forms inside. The Ariston double-circuit boiler can be used to equip a heating system and supply hot water.

Reviews about the model

According to buyers, the boiler has many advantages, among them are:

simple control;
profitability;
simple installation;
adaptation to the conditions of Russia;
built-in condensate collector.

"Ariston 24" is economical, which attracts consumers. It has low fuel consumption. Installing it is pretty easy. This is facilitated by the compact dimensions of the case. You can place the equipment on the wall in a limited space. According to buyers, the unit can operate at reduced gas pressure. The operation of the device is possible even at low external temperatures down to -52 °C. Customers like that the boiler has a self-diagnostic function. The structure is equipped with a stainless steel heat exchanger.

Overview of the Genus Premium 45 HP boiler

If you are interested in Ariston boilers, it is recommended to read reviews about them. You can buy equipment for 144,200 rubles. This wall model is used for heating houses and premises. The equipment is equipped with a closed combustion chamber. The spiral heat exchanger is made of stainless steel.

On the external panel of the wall-mounted boiler "Ariston" there is a display that simplifies the management and control of work. Efficiency is improved through the use of condensing technology. Energy costs are reduced, especially when compared with traditional boilers.

Reviews about the model

Quite often, recently, consumers have been interested in Ariston boilers, you can read reviews about them in the article, perhaps they will allow you to do right choice. As for the above model of equipment, it, according to buyers, has outstanding features, among which are:

simple control;
security;
ease of use;
comfort;
silent operation.

During operation, a minimum amount is emitted into the atmosphere harmful impurities. This indicates safety. Many consumers, in their words, when buying such equipment pay attention to ease of use. In this case, the operating time and heating temperature in heating mode can be set according to the needs of the user.

The unit is silent. It saves fuel by up to 35%. With reduced gas pressure, the equipment will be able to maintain stable operation. The case has a compact size, so you can install the boiler even in small rooms. Consumers also like the fact that they have the opportunity to additionally connect a storage boiler for hot water.

Model instruction manual

You can also choose the Ariston boiler as heating equipment, the instruction manual is supplied with the kit and must be studied by you before using the equipment. In it, the manufacturer discloses security issues. For example, it is important to exclude the leakage of liquid gas, as this may pose a danger to human life. If this still happens, then the heating system must be turned off. The room should be checked by closing all doors that lead to living rooms. The use of electrical switches is prohibited.

If you smell gas, the gas leak can cause an explosion. Under these conditions, smoking is prohibited. It is important to exclude the possibility of sparks and open flames. You need to immediately open the windows and shut off the gas supply. The heating system must be turned off. No people should be allowed into the danger zone.

The Ariston boiler, the operating instructions of which you must read if you have purchased such equipment, is installed taking into account the manufacturer's recommendations. After reviewing them, you can find out that the device is mounted on a vertical flat surface. For ease of maintenance, minimum clearances should be ensured. Special ventilation in the room where the device is installed is not required.

When connecting gas, make sure that the connections are tight. Wiring must be connected in such a way as to facilitate the electrical isolation of the equipment. Before supplying water, flush the system without disconnecting the device. In order to remove contaminants and prevent damage to the heat exchanger, it is worth making sure that there are no contaminants, as they can cause build-up and corrosion.

Possible malfunctions

By the error code of the boilers "Ariston" you can find out about the malfunctions. Overheating will be indicated by "1 01" on the display. The sensor will work if the temperature is 102 °C. As soon as cooling occurs, the error will be reset. An insufficient coolant flow can lead to a similar problem, as a result of which the filter of the heating circuit becomes clogged.

Sometimes there are problems with the circulation pump. An excessively large flame on the burner can lead to such an error. Sometimes a method that requires shutting off the gas valve helps. After reviewing the errors of the Ariston boilers, you can understand what went wrong in the process of work. For example, the code "1 02" indicates that the pressure sensor in the circuit is faulty. Low pressure can lead to such an error. Reset it will not work, you will need to eliminate the cause.

Insufficient circulation is indicated by codes from "1 03" to "1 07". Sometimes this leads to insufficient volume of coolant. In order to troubleshoot the Ariston boiler, you need to remove the air by pressing the ESC button for a few seconds. The pump will run without ignition of the flame. Next, check the pressure, if necessary, add.

If there are problems with the circulation pump, then the control relay may be the cause. When equipment encounters slagging in the heat exchanger, good circulation can be prevented. This is sometimes also caused by the clogging of the filter, which is installed in the heating circuit.

Conclusion

The Ariston double-circuit boiler, one of which was discussed above, will allow not only to arrange a heating system, but also to use hot water. Modern equipment is equipped with many features that will make living in the house comfortable. You can also choose boilers from the manufacturer "Ariston". They are presented for sale in a wide range.

Gas boilers Ariston appeared on the Russian heating market among the first. Largely due to its world-famous brand, this Italian manufacturer of gas heating equipment quickly managed to "win" the domestic buyer and achieve high sales dynamics.

Ariston gas boiler, reviews of the owners of which help to better decide on a purchase, we can often find on different sites and in online stores. Modern feature set and good design, not bad specifications and a large selection of models are a clear advantage when buying a device, even despite the somewhat inflated prices.

But today we will consider not only the pros, but also the disadvantages of Ariston mounted boilers, having studied their device and features of the models, using the instruction manual, photos, customer and specialist reviews.

Model range of wall-mounted double-circuit gas boilers Ariston

The Italian manufacturer is represented on Russian market a fairly wide range of wall-mounted gas boilers. We can meet gas boilers Ariston double-circuit and single-circuit, traditional and condensing, with and without a storage boiler.

In addition, like most competitors, gas boilers heating Ariston are issued with the closed combustion chamber (turbocharged) and with open (atmospheric). For devices with forced draft, a chimney outlet is provided horizontally through the wall, additionally buying a special one for it with a pipe diameter of 60/100 mm.

Gas boilers Ariston: product range

To date, the Italian company produces several modifications of its traditional double-circuit gas boilers:

- Ariston BS 15 FF, 24 FF and 24 II;

- Ariston Cares X 15 CF and 15 FF, 18 FF, 24 CF and 24FF;

- Ariston HS 15 CF and 15 FF, 18 FF, 24 CF and 24FF;

- Ariston Clas X 24 FF, 28 FF and 24 CF;

- Ariston Egis Plus and Premium;

— Ariston Genus X;

— Ariston Alteas X.

Single-circuit gas boiler Ariston with the ability to connect a boiler indirect heating represented by only one model "Ariston Cares X System" with power from 15 to 32 kW with closed and open combustion chambers.

Double-circuit gas boilers Ariston are available with a capacity of 15, 18, 24 and 28 kW. The most popular modification is a 24 kW device that can heat a house up to 200-230 m2. Turbocharged boilers have the symbols FF in their name, atmospheric - CF.

Features of the Ariston Cares X gas boiler: instructions, device

Ariston Cares X 24FF

This model is one of the budget in price segment up to 35,000 rubles, and due to this the most popular, judging by the number of reviews from the owners of the Ariston boiler. But even for a small amount, the buyer receives a modern wall-mounted gas boiler with a nice appearance, button control and LCD display, as well as the entire set of necessary functions.

As on all models of Ariston wall-mounted gas boilers, the Cares X series devices are equipped with: circulation pump stamps Wilo with automatic air vent and gas valve SIT. In addition, they are equipped with a boiler safety group and a membrane expansion tank of 8 liters.

The gas boiler "Ariston Cares X" has two heat exchangers: the main copper with aluminum coating for the heating circuit and the compact secondary stainless steel for the DHW circuit. The capacity of this secondary heat exchanger for the 24 kW Ariston Cares X 24 FF (CF) models is 13.6 l/min. Consider the device of a double-circuit gas boiler Ariston Cares X 24 FF NG:

Double-circuit gas boiler Ariston

1 - outlet for a coaxial chimney;
2 - pneumatic relay;
3 - collector for condensate;
4 - main heat exchanger for heating;
6 and 19 - temperature sensors at the inlet and outlet of the heating circuit;
7 - Polidoro gas burner;
8 - ignition electrodes;
9 - secondary heat exchanger for hot water supply;
10 - gas valve SIT;
11 - safety valve for 3 bars;
12 - ignition block;
13 - pressure gauge;
14 - tap for feeding the heating system;
15 - filter;
16 - DHW flow sensor;
17 - Wilo circulation pump;
18 - pressure switch;
20 - three-way valve drive;
21 - burner flame control sensor;
22 - combustion chamber;
23 - expansion tank;
24 - fan (turbine).

The "winter-summer" mode and room thermostat help to reduce gas costs. In summer, the boiler can only work on the DHW circuit, while in winter the device works economically thanks to the modulating gas burner. Room thermostat not included in the boiler package, but it can always be bought separately.

Boilers of this series have in their device temperature sensors installed on the "supply" and "return", temperature running water, flame and draft control sensors. In addition, the devices are equipped with a security system: protection against low pressure water, the function of protection against freezing of the system and its overheating.

Gas boiler Ariston adapted to Russian conditions such as voltage fluctuations in the mains, low gas pressure and low temperature air outside the window. But, even despite this, the manufacturer himself recommends connecting the boiler through.

This recommendation applies not only to boilers of this brand, but also to other wall-mounted gas boilers of any manufacturer. If the electronic board of the boiler suddenly fails due to a power surge, then this case will not be guaranteed.

Technical characteristics of the double-circuit gas boiler Ariston Cares X

Ariston gas boiler: technical specifications

Advantages of Ariston gas boilers:

- a very large selection of models;
- a prestigious global brand;
- Italian assembly;
- two heat exchangers;
— adaptation to Russian conditions.

Disadvantages of gas boilers Ariston:

- overcharge;
- components made in China;
- the main direction of the company is the production of storage water heaters.

Dual circuit gas boilers Ariston

One of the most important tasks in designing an autonomous heating system is the choice of equipment that heats the coolant before it is fed into the batteries. Both the efficiency of the climate network and its economy depend on this device. Ariston gas heating boilers are rightly recognized as one of the best thermal units on the modern market, the features of which we will discuss below.

Trademark History

The year of foundation of the Italian company Ariston is considered to be 1930. Its first leader, and at the same time the owner, was the engineer Merloni. The company began its activities in a place called Fabriano, but at that time it specialized exclusively in the production of various scales.

After a certain time, the range of manufactured goods was expanded by gas climate equipment and cylinders in which liquefied fuel was stored for them.

Over time, the experience of employees and innovative developments in the field of climate equipment have been transformed into the most modern, ergonomic and inexpensive solutions for arranging individual heating systems - Ariston gas heating boilers.

The name itself trademark translated from Greek as "the best" and speaks for itself. This brand was registered in 1960. Now trademark, as well as the plant producing gas boilers, is part of the large corporation Merloni TermoSanitari S.p.A., which occupies one of the leading positions in Europe among manufacturers of climatic equipment.

Ariston heating gas boilers are distinguished by a quite affordable price and compact dimensions. And the instructions for operating, configuring and maintaining the devices are so simple that you can easily perform all the necessary operations with your own hands.

In addition, experts appreciate Italian equipment for other advantages:

exceptional ease of installation, facilitating installation;
compact dimensions that allow you to fix the boilers even in small rooms;
attractive design that organically complements the interior of the premises;
ergonomic control panel that allows you to adjust the parameters of the heater in a wide range, achieving maximum comfort and economy;
noiselessness at work.

The package of most models, in addition to the standard burner, heat exchanger and controller, includes expansion tank, security group and circulation pump. That is, by purchasing an Ariston gas heating boiler, you get a complete solution that can be connected to pipes without any difficulties.

The most popular are the following series of thermal equipment of the Italian company:

Egis;
Clas;

Note! Regardless of the model, all Ariston boilers are double-circuit. This means that they will not only keep you warm in winter, but also supply any amount of hot water needed for domestic needs.

Varieties of boilers

Ariston Egis

A feature of the Italian gas boilers Ariston of the Egis line is their adaptation to domestic gas and electricity supply lines. They perfectly tolerate strong voltage fluctuations in the network and support the operation of the burner even with a very strong pressure drop in the main gas pipelines.

This device is specially designed to provide heat to homes located in harsh climatic zones. The device will function properly at an outdoor temperature of -50 degrees Celsius. In addition, the units are equipped with special condensate collectors. Therefore, you do not have to worry about where to put the moisture that forms in the outlet channel.

Ariston Egis boilers are equipped with two heat exchangers:

primary - made of copper coated with a specially designed protective layer;
secondary - made of stainless steel, which increases its strength and extends its service life.

In addition, gas heating equipment This variety has additional components and assemblies:

cleaning filters, thanks to which a high-quality coolant enters the boiler;
temperature sensors that change the operating modes of the boiler depending on the temperature inside the house and on the street;
expansion tank, which compensates for the increase in pressure in a closed heating network after it is put into operation;
, accelerating the flow of fluid, reducing the inertia of the system and increasing its efficiency.

In addition, other features of the Ariston Egis boiler line can be mentioned:

The presence of a controller that analyzes the composition of the air that is released into the atmosphere and checks the quality of the gas supplied to the burner.
Ability to install minimum power work, which saves energy, but does not allow the liquid to freeze in pipes (used in country houses when the owners leave for a long time).
Availability of protection modules against the formation of mineral deposits, freezing of liquid in pipes and pump failure.

Note! Gas boilers of this line are equipped with electronic system control, which allows not only to manually change the operating modes, but also to program the operation of the unit depending on the time of day, day of the week, and so on.

Ariston Clas

This type of climate equipment includes enough powerful boilers, combining excellent technical characteristics and ease of use.

There are two types of heaters of this variety:

with an open combustion chamber (CF);
with sealed combustion chamber (FF).

Operation parameters are set from the digital control panel. The boilers are hung on the wall using the brackets included in the kit and perfectly fulfill their task of providing rooms with heat and preparing the right amount of hot water.

A special controller independently changes the power of the equipment and the rate of circulation of the coolant, depending on the temperature outside the house. Thus, after turning on the boiler, the temperature in the dwelling rises as quickly as possible for a water heating system.

The hot water supply subsystem deserves special attention. The special shape of the heat exchanger makes it possible to ensure its presence in the tap already five seconds after the second circuit is turned on.

In addition, special settings support the heating mode so that the water in the hot water pipes does not cool down for another 30 minutes after the heating command is received.

Boilers of this variety are specially designed for autonomous equipment. heating systems in city apartments. They differ in the most compact dimensions and the close location of the inlet and outlet nozzles. All controls and connections are positioned for maximum ease of use.

If the running water heating system is not suitable for you, you can purchase single-circuit boilers. They are used only for heating, however, it is possible to connect storage boilers. Thanks to these devices, you will always have a sufficiently large amount of hot water at your disposal.

All Ariston Clas boilers are designed for use in Russia, they tolerate voltage drops and gas pressure fluctuations well.

In addition to all of the above, the equipment of the Clas line has some more unique features:

Easy adjustment. You simply set the switch to the mode you need (summer-winter, weekday-weekend, and so on), and the boiler controller itself sets the necessary parameters for the operation of the climatic equipment. The temperature is analyzed both indoors and outdoors.
A sensor located in the channel that removes combustion products analyzes their composition and, based on the data obtained, regulates the operation mode of the exhaust valve.
For safe use equipment, the boiler is already equipped with a pressure gauge, safety and bypass (bypass) valves, a thermostat, and so on.

Note! The described equipment also has the “Anti-Ice” and “Anti-Water” safety modes, which prevent the unit from breaking down in case of freezing of the coolant or airing of the system.

Ariston Genus

These units are the most functional and richly equipped. They have a special liquid crystal display, thanks to which you can not only set the operating modes and monitor various parameters, but also perform boiler maintenance (this can only be done by specialists, focusing on the indicated error codes).

Another very important feature of Ariston Genus boilers is the ability to work on main and bottled (liquefied) gas. For the conversion of the burner, the delivery set contains all the necessary parts and tools.

The boilers are distinguished by the most compact dimensions, but a sufficiently powerful gas burner. Climatic equipment can be used both for heating small apartments and for heating rather large individual cottages.

Despite the high power, Ariston Genus boilers are among the most economical. A special control device accurately sets the required temperature of the coolant, ensuring economical gas consumption.

In addition to all of the above, Ariston devices of this line have other features:

A special programmable controller that allows you to set operating modes depending on external conditions (temperature, time of day, season, and so on).
A pump with several speeds, which makes it possible to organize a more intense flow of liquid. This increases the efficiency of the climate network and makes it more economical.
A capacious expansion tank that allows you to connect the boiler to heating systems with a large volume of circulating coolant.
Mechanical cleaning filters that protect both the inlet pipe for filling the coolant and the inner circulation circle.
The control panel of a copper is completely Russified that does work with it as much as possible convenient.
Special sensors prevent the boiler from breaking down in the event of ice formation, failure, air locks and other troubles.

Installation of heating equipment

Before describing the sequence of steps for installing the device, it should be noted that the installation of gas equipment - heating or any other - can only be carried out by certified specialists after you have received permission from the organization supplying the main gas.

In general, the installation of the boiler takes place in the following sequence:

A coaxial angle is set through which combustion products will be ejected and taken fresh air needed to keep the burner running.
The place of contact of the coaxial channel with the material of the wall of the house must be protected with special gaskets, and the pipe itself is fixed with a clamp.
Then the boiler itself is mounted. To do this, use the brackets that come with the equipment. Remember that you need to fix the device only on the main wall, since interior partitions, especially drywall, will not withstand its weight.
Between the back of the boiler and the wall, a gasket must be made of non-combustible material protecting the structure of the building. This is a mandatory fire safety requirement.
Then it is mounted on the inlet pipes of the boiler shut-off valves through which all pipes are connected: heating. The use of taps allows you to shut off the flow of water and dismantle the boiler in the event of a breakdown without draining the coolant from the system.

Once the installation of the boiler is completed, it can be started. To do this, the system is filled with water, from it with the help of air valves(Cranes Mayevsky) air is removed, after which the device is turned on according to the instructions. No more complex manipulations are needed.

Conclusion

Heating boilers of the Ariston trademark are undoubtedly reliable and high-quality elements. climate system. However, in order to achieve maximum comfort, it is necessary to choose the right heating radiators, pipes, thermostats and other important equipment.

See the video below for more details on this.

Italian manufacturers have been producing Ariston brand boilers for quite a long time. Boilers became popular with us during the period of intensive individual construction of buildings, in houses where work central system heating leaves much to be desired.

Ariston succeeded with his technical abilities, fell in love with the people due to the variety of configurations, a wide range systems and is still in demand among consumers.

The lineup

The line of models of double-circuit boilers, unlike single-circuit boilers, is more in demand, since the models are designed for heating rooms and supplying hot water.

BCS 24 FF (with closed combustion chamber) and Uno 24 FF (with open combustion chamber)

Most buyers choose Ariston of these brands. In addition to the operating instructions, all elements of the heating system are attached to the device, which you can manage every day and without special skills.

Efficiency reaches 95%, power - 24 - 26 kW, hot water capacity - up to 14 liters per minute.

Genus

It is considered the most functional model. There is a display on the case, all the parameters of the device are reflected both inside and outside. Ariston of this brand is compact, equipped with a modulated burner that helps to save fuel, and there is also a programmer with a built-in timer.

You can set the program for the device immediately for the whole day, lower or increase the temperature, set the parameters for the unit at your discretion. The volume of the tank is 8 liters, the air vent is automatic, a self-diagnosis system is built in, all information is displayed on the display.

Egis Plus

Adapted for operation in the Russian climate. Models are not afraid of voltage drops in gas pressure in pipes. The unit has 2 heat exchangers: copper and stainless steel, as well as a condensate collector for trouble-free operation when outdoor temperature below - 52 degrees. On the panel - LED indexing.

All information can be read on the display.

Advantages and disadvantages

Like any system, the Aristons are not perfect.

Its undoubted advantages are:

Security. The system is safe, even though the fuel is explosive.
Efficiency is high, when burned, the gas leaves practically no residues, the heating is completely spent on the needs of the owners, heat is retained in the room.

The disadvantages include:

Don't choose a cat l for space heating
For boiler installation a separate, and not a small, room is required, since a fire-fighting system still needs to be placed nearby, in case of ignition of the hearth
The pressure in gas boilers is not stable, sharp jumps are possible, which is also explosive. Required additional installation adjustment unit, burners, the device can quickly fail.

Specifications and selection criteria

When choosing, it is important to pay attention to the following characteristics:

Boiler power, consisting in the calculation of heat. Without certain knowledge, it is extremely difficult to do it yourself. The calculation takes into account the area of openings of all windows in the dwelling, the percentage of heat transfer from radiators, and the heat permeability of the walls. Only taking into account these parameters, the choice will be optimal, and you will not have to overpay for excess electricity. The average energy consumption coefficient is 100 W per 1 meter of housing. When combining a heated room with an unheated one, the indicator will increase by half, up to 160 V.
The presence of a flue for gas outlet.
The presence of a circular pump in Ariston. Without it, you can not leave the device unattended in winter, the pipes may burst. The control system should be simple and understandable to the average user. A device stuffed with various functions is unlikely to be needed for heating water, and the cost of such multifunctional blocks increases significantly. Today they are not in demand.
Heat exchanger material. It is better if it is steel, cast iron, or copper. It is advantageous to have a copper unit, it has high efficiency, the entire temperature obtained is given to the carriers. However, the strength of copper is not different. Performance and durability are higher for cast iron boilers, the alloy is reliable and durable.
The performance of the boiler depends on the water consumption for the needs of the family. The boiler is not suitable for heating large areas, but it can handle water heating quite well. It is not difficult to calculate the water consumption, knowing that 5-6 liters of water flows out of the boiler per minute. Up to 12 liters pour out of the shower during the same time. It is necessary to count the number of points connected to the boiler and make a total calculation.

Manufacturers in the documentation for the boiler indicate the difference temperature regime before heating, compared with the temperature after heating. When choosing a model, in addition to the water flow rate, take into account the water temperature before starting to heat the boiler.

If up to 5 liters of water per minute flows out of the tap, the water temperature before heating should be at least 7-8 degrees. If there are 3 points in the apartment, you need 5 + 5 + 5 \u003d 15 liters. When the boiler is heated to 40 degrees minus 7 degrees, 33 degrees will come out before heating, which is quite acceptable both for washing kitchen utensils and for taking a shower.

The advantage of modern units is given to floor boilers. The operation of Ariston data is not affected by the quality of the power supply, models with cast iron heat exchanger more reliable and durable.

Price and reviews

You can buy a new Ariston for 20-25 thousand rubles. Foreign analogues, novelties with many functions and built-in LCD displays are more expensive, but they are also of better quality. Although our domestic producers are no worse. It is better to overpay, but buy a reliable, trouble-free thing, taking into account all the described parameters.