Wallpaper understudies for the walls of the idea of gluing. Ideas for pasting walls with different wallpapers in the kitchen, in the bedroom, in the hall. Ways to combine wallpaper

18.11.2019

Sticking wallpaper of two types is a fairly common lately way to decorate surfaces in residential premises. Using this method, you can create a unique design interior, create an accent, visually increase the height of the walls and expand the space. Before sticking wallpaper of two types, it is recommended to learn about the basic rules for combining them.

Wall pasting different wallpapers should be carried out strictly according to the rules. To make the combination look as harmonious as possible, you need to take into account a number of factors even before starting work.

Ceiling height

It is on this characteristic of the room that the final choice of material, its pattern, texture and shade depends.

Room dimensions

If the area of \u200b\u200bthe room is large, then you can safely use materials of dark colors and their combinations. Saturated shades are also suitable, they will visually reduce the dimensions of the room, but in spacious rooms this will not be as noticeable as in small ones. You should not dwell on ordinary plain products, it is better to glue the room with dark materials with large light patterns. Very often, for pasting wallpaper of two types, products without a pattern and materials with the image of foliage, bamboo trunks and other plant motifs are used.

As for small rooms, it is impossible to visually reduce the space, therefore dark tones do not fit, it is better to use light products with a small pattern. A medium-sized repeating ornament will look great.

It is also important to consider the geometry of the room. If the room is long and narrow, for example, a corridor, then it is better to paste over the short walls with light wallpaper with a slight overlap at the corner, and the long ones with darker or more colorful ones, if the planned wall design allows. So visually smoothed out the difference in the size of the surfaces.

When the entrance to a narrow room is located on one of the long walls, the following type of wallpapering is perfect: you need to choose a color for short surfaces, and use several strips of a more saturated color for the middle of a long wall. The corners of the room should be sealed in tone with short walls.

Design option for a narrow room

Material texture

Now consider how to combine two types of wallpaper, depending on the thickness and texture of the product:

The main rule is to use materials of the same thickness. It is best to choose products made on the same basis. That is, paper with paper, non-woven with non-woven and so on. There are other options for pasting walls with different wallpapers, but they require careful selection. As for colors, there are no strict rules, it is recommended to place probes on one surface before buying and look at the resulting combination.
With texture, things are more complicated. If the joining of the strips is planned only in the corners, then you don’t have to worry too much about the difference in thickness or texture. The fact is that in such a place it is quite difficult to notice the transition, if it is small. But if you plan to connect the products in the middle of the wall, then it is better to either use materials with the same texture and different colors, or cover the joints with skirting boards and other products.

Combining products of different textures will require hiding joints using molding

It is necessary to take into account the features of applying each type of wallpaper. If it was decided to combine paper and non-woven roll materials, it is important to buy a special glue for each. Can be purchased universal composition, but for the best effect it is recommended to use different ones.

Technology is also important: in the case of paper wallpaper, glue is applied to both the wall and the product, non-woven wallpaper does not require processing of the reverse side.

Room lighting

How can you beautifully beat the lighting? If the room is almost always well lit by the sun, then it is not necessary to artificially darken it by pasting all surfaces with dark wallpaper. It is better to stick light products on 3 walls, and the last one, which is opposite the window, is darker. As a result, pasted wallpapers will not look monotonous and will not darken the room too much. This technology also works in the opposite direction: in dark rooms, you can stick a wide strip of light wallpaper on one of the walls and thus lighten the interior a little.

Combination of different types of materials

The modern market offers a huge number of different types of wallpaper that can be used in combination with each other. Below are the best combined wallpaper options:

Paper. This classic variety is perfect for pairing with almost any look. They are easy to cut, so using paper models you can arrange colored inserts or accents.
Vinyl. The perfect combination- ordinary vinyl products with photo wallpapers. They can also be combined with multilayer paper materials so that there is one thickness.
Non-woven. They go well with all types, except for textiles.
Liquid. Best used in conjunction with vinyl or non-woven options. Since liquid wallpaper is a wet material similar to plaster, the combination with paper is not recommended.
Textile. This type of wallpaper is better not to combine. There are a huge number of fabric-based models, it is worth dwelling on a few of them.

Options for combining materials on surfaces

If the question arose of how to glue two types of wallpaper beautifully, it is recommended to pay attention to one of the following options. These methods are considered classic and have been used more than once for interior decoration.

vertical stripes

In this case, materials with different patterns are glued onto the walls one by one. A similar design of wallpapering helps to visually increase the height of the walls. It is important that the glued products have the same texture, since the play of shades will already attract attention. In addition, using the same wallpaper, you can beautifully join them without a difference in the seams.

horizontal stripes

This combination is perfect for visually expanding the space. This method is ideal for rooms with high ceilings where there is no need to increase the height of the walls. To wallpaper the walls, it is necessary to divide the surfaces into two parts: first, the upper strip of one color is glued, and then the lower one is of a different shade. To do this, you can buy products with any texture and ornament. The main thing is that they are well combined with each other.

The horizontal division of the walls is best suited for rooms with high ceilings.

inserts

Options for sticking wallpaper of two types with inserts are also different.

This idea is perfect when you want to focus on the interior:

First, markings are applied to the wall, taking into account the location of the colored inserts. For ease of pasting, it is better to draw rectangles or squares.
Then you need to prepare the wallpaper itself. Monochromatic material is cut so that it does not cover the figures drawn on the wall.
The main wallpaper is glued first.
After that, products of other colors are cut out according to the given sizes and the resulting gaps are sealed with them. If wallpaper with different textures is used, it is necessary to seal the joints with moldings.
Thus, the entire wall is pasted over.

There are other ideas for wallpapering using inserts:

A large section of the wall pasted over with photo wallpaper is the basis of the composition, it is marked out and processed first. From it it is already possible to glue ordinary vinyl or non-woven wallpaper, the color of which will be combined with the gamut of the picture. For example, if there is an image of a green forest in the center, then wallpaper in green or brown tones should go to the sides.
There is also a patchwork technique. Here, the products are cut into small fragments of approximately the same shape, after which they are glued to the base according to the applied markings. You can stick fragments in a certain order or randomly.

Wall decoration using patchwork technique

Other techniques

You can also use one of the following ideas:

Contrast of walls and ceiling. Only suitable if the ceiling height is more than 2.5 m. In this case, it is recommended to make the ceiling darker or lighter than the walls. You can also use a gradient: the bottom of the wall is dark, the top is a little lighter and the lightest is the ceiling.
Corner finishing. The main area must be pasted over with light wallpaper, and darker shades should be used in the corners. This technique allows you to visually expand the room, but it can only be used if the design does not require compliance with strict rules for color combinations. This option is perfect for rooms with corner furniture, then this part of the wall will be emphasized.
Highlighting the surface relief. If there are any ledges or niches in the room being processed, you can focus on them. For example, paste over the main area with plain dark wallpaper, and the protruding fragments with lighter ones. Or vice versa, but this option is not the most popular.

Highlight a niche with wallpaper of a different color

Basic Rules

For gluing wallpaper of two types, strict adherence to certain rules is required:

Color solutions need to be implemented not only in wallpaper combinations, but also in furniture, curtains, various items and accessories. So the interior will look more harmonious.
The combination of plain materials and products with ornaments is considered one of the most successful.
It is not recommended to use combinations of colorful tones. It is better that one band is bright, and the second is more muted.
If there is a floral pattern on the main material, then a combination with wallpaper, the texture of which is made in the same style, would be an excellent solution.
Products with geometric shapes are recommended to be combined with abstraction.
When using materials with different textures, it is necessary to mask the joints with the help of moldings, rails, tapes and borders.
Triple combination is possible only in the case of large rooms, in small rooms the interior will look too bulky.
Both glue and wallpaper need to be bought in the same store, it is better if they are from the same manufacturer.
Pre-marking is required.
It is recommended to start pasting from the top.
When applying products, it is important to leave a reserve in case they move out after drying.

The combination of two types of wallpaper with different patterns, textures and color solutions makes it possible to create original interior. It is only important not to rush and first check how good this or that combination will look on the walls.

The most important stage of the repair is pasting the side surfaces. The appearance of the room depends on how the walls look. In the course of work, problems may arise that cannot be eliminated later. You can see a photo with high-quality wallpapering of walls with wallpaper below.

Preparatory stage

Before you take on the roller and the bucket of glue, you need to carry out a few simple manipulations. It is from right action depends on the further process. First you need to calculate the material consumption, and prepare the walls before wallpapering.

A trip to the hardware store

Before buying wallpaper, glue and other consumables, it is necessary to accurately calculate the area of \u200b\u200bthe walls of the room. For convenience, you can always use the online calculator. When calculating, it is necessary to take into account the fit of the canvases, if they show a pattern.

Buyers are often faced with choosing the type of wallpaper. Modern manufacturers offer: paper, non-woven and vinyl the lineup. All of them differ in thickness, width of the cloth, pattern and quality.

Wide non-woven wallpaper is in demand. They are easy to glue, they easily lay down on the surface and have high wear resistance.

Wall preparation

In order not to be disappointed in the end result, you need to clearly know how to prepare the walls for pasting. For surface treatment, you will need a spray bottle with water, a spatula, unnecessary rags.

To remove the old layer of wallpaper, you need to spray on it and wait until the canvas gets wet and begins to move away from the wall. To enhance the effect, use warm water and soap solution.

Then the canvases begin to rip off with a spatula or knife. If the wallpaper comes off well, you can remove it with your hands.

Cracks, cracks and irregularities can hide behind the old layers. They must be removed with putty. Then the walls are plastered and primed.

After such processing, it is better to transfer the pasting to the next day so that the applied layers dry well.

In the case of decorating walls with non-woven and vinyl wallpaper plaster and primer are usually not carried out. The thickness of the canvases allows you to hide minor surface defects.

pasting process

First you need to dilute the glue. For each type of wallpaper there are special means for pasting. In warm water, gradually pour the contents of the package.

To avoid lumps, you need to constantly mix the solution. After that, the glue should infuse and thicken. The process takes approximately 15 minutes.

During this time, you can still cut the wallpaper. There are several ways to cut canvases:

using an angle ruler;
bend (without tools).

A roll is spread on the floor front side down. One end of the canvas can be held by an assistant or it is clamped with improvised means to avoid folding the wallpaper back into a roll. The same is done on the other side of the cloth.

Then, knowing the height where the material is to be pasted, the same length on the wallpaper is measured with a tape measure. Moreover, it is desirable to add 5 cm to the value just in case.

A ruler with a right angle draws a line that should be perpendicular to the edges of the wallpaper. If there is no measuring tool at hand, the material is folded at the mark so that the edges of the roll coincide.

A piece of wallpaper is cut off with scissors along the fold line or along the drawn segment, on which glue is then applied.

Methods for spreading canvases

If you have paper wallpaper in front of you, then the adhesive solution is applied with a roller or brush on the wall and on the glued canvas. For non-woven and vinyl representatives, it is enough to apply glue only to a piece of wallpaper.

In order for the canvas to be evenly soaked, it is folded with a book. First, the two edges are bent so that they meet approximately in the middle, and then the already bent edges are again bent in half again.

Two blanks can be made using this method. While one is impregnated with glue, the second is glued to the wall.

Pasting is done from top to bottom. For this, a blank is taken and one part is stuck. Then the second half of the canvas is carefully attached.

With a dry cloth, the glued piece is ironed from the middle to the edges. This removes excess glue and unwanted bubbles on the wallpaper, which can be difficult to remove.

There may be unglued areas around the edges. They must be smeared with glue using a small brush.

While one person is engaged in the final work, the second is again preparing the next piece of wallpaper for gluing.

As you can see, sticking wallpaper with your own hands is not so difficult. Finally, I would like to give a few useful advice to make the wrapping process easier:

Thin paper wallpaper glued on. The remaining types of interlining and vinyl are glued end-to-end.

Work should be done in daylight. It is advisable to turn off the electricity, remove all sockets and switches before sticking. The place for the connectors is cut out on the already glued wallpaper.

It is necessary to remove the plinth in the renovated room.

You can not glue wallpaper with open windows. Drafts can lead to poor adhesion of glue and wallpaper. After gluing, the door to the room must be closed until the glue has completely dried.

Photos of finished walls covered with wallpaper can also be viewed in our gallery. Good luck and good luck with the repair.

Photo of wallpapering walls

The content of the article:

Two types of wallpaper on the wall is an excellent design solution that allows you to transform any room, visually dividing it into zones. Thanks to this method of pasting, you can mask the flaws of the room or emphasize its advantages. At the same time, wallpapers can have different colors, textures and patterns, and the future result of the work can be assessed in advance by rolling two rolls on the wall next to it.

Types of combined wall decoration with wallpaper

The combination of wallpaper of two types on the wall can be vertical, horizontal, inset and patchwork. The option of vertical division of the wallpaper is great, for example, for the living room. For him, they often select material that has different patterns and colors, but the same width, texture and, most importantly, thickness. Design solutions can use a contrasting option with different colors or monochrome, which involves pasting the walls with wallpaper that is similar in shade.

With horizontal division, you can combine wallpapers of different thicknesses. For example, make the lower part of the wall embossed, and paste over its top with lighter textile wallpaper. In such cases, the joint between the wallpaper different types upholstered with a decorative border.

Wallpaper inserts are designed to emphasize a certain area in the room, for example, you can paste over a corner in a nursery with one color of wallpaper.

Patchwork wallpaper combination involves the use of the same background, but different patterns. Such pasting begins with shreds, and the main color is already adjusted to them.

The advantages of wall decoration with two types of wallpaper

Using the above-described types of wallpapering the walls with two types of wallpaper, you can get different effects of interior design.

Vertical stripes of wallpaper visually enlarge the room. If it has high ceilings, which is primarily characteristic of the private sector and Stalinka apartments, you can divide the walls with wallpaper in a horizontal direction so that the level of structures is not very conspicuous, especially with low furniture.

A visual increase in the space of the room can be achieved by pasting its corners with a darker material compared to the general background.

In addition, this design is quite economical. Often, many stores arrange a sale of leftover material at reduced prices. Therefore, the combined gluing process can reduce the final cost of the repair without sacrificing quality.

Choice of two types of wallpaper for wall decoration

Before buying wallpaper, you should calculate their quantity and plan possible options combining paintings on the walls. First of all, you should take into account the features of the room: whether it is cold or warm, large or small, light or dark. Using options for combining wallpaper for wall decoration, certain rules must be observed. They take into account the height of the ceilings, the lighting and dimensions of the room, as well as the texture of the material. Let's consider them in more detail.

Ceiling height

This room parameter affects the choice of wallpaper pattern, and also largely determines their color and texture. With a room height of less than 2.5 m, canvases of a soft texture and light colors are used. You can visually raise the ceilings by combining the main light background with a subtle pattern or texture and vertical stripes in the form of canvases of a different color, which can be located on two or three walls.

Ceilings over three meters high require a completely different approach. Here, the canvases should have a large pattern stretched across the width. You can apply the division of the walls in the horizontal direction, using different colors of wallpaper for pasting the lower and upper parts of the structures. This technique is considered a classic, so that such a design looks decent, you should try very hard when choosing patterns and shades of canvases.

Room dimensions

In rooms of large areas, wall pasting can be done with wallpaper that has dark shades, which visually reduce the space. If dark plain walls are undesirable, you can choose wallpaper with a large light pattern that has a floral theme, geometric shapes or abstraction.

In small rooms, the opposite is true: they are used bright hues. Wallpapers are selected with a medium-sized texture and not a pronounced small pattern.

The geometric shape of the room for pasting walls with wallpaper of two types also has great importance. In a long and narrow room, short walls should be pasted with more light wallpaper, and some of them - to start around the corner. In this case, the difference in the size of the room will not be so noticeable.

There is another method used if the input to narrow room located in one of its long walls. In this case, the middle part of the opposite wall is highlighted with wallpaper of a different color, and the corners are pasted over with canvases intended for the short sides of the room.

Invoice selection

Combined wallpapering requires a careful approach to the selection of the thickness of the material and its texture. In combinations, it is recommended to use canvases of the same type. With their angular docking, you can not pay special attention to the texture and thickness of the wallpaper. But if the connection of the canvases occurs on a common wall, then the transition will be emphasized by the difference in their thickness.

If, nevertheless, a decision is made to glue wallpapers of different types, then for this you should use the glue that suits them. For example, non-woven wallpaper is glued on one composition, and paper - on another. The way out of this situation can be the purchase of universal glue, it is on sale.

Room lighting

If the room is bright or its interior seems too monotonous, it is not at all necessary to glue dark wallpapers on absolutely all the walls. One of them, located opposite the window, can be slightly darkened, and the rest left light. As a result, there will be no oppressive atmosphere created by a dark background, and the light will not become so intrusive.

This technique can also work in reverse. For a dark room, it is enough to stick light wallpaper on the wall opposite to the window. It will be much lighter.

The design style of the room must be chosen based on its functional purpose. Only after that you can select the colors of the wallpaper and decide on the method of decorating the walls with two types of wallpaper.

Combined canvases must be in harmony with the interior and furniture of the room. The selection of wallpapers for the best combination is recommended when buying them. For this canvas, you just need to attach to each other and determine their suitability for the intended wall design.

If any wallpaper in rolls is available at home and you need to pick up a pair for them, for example, for flaps or inserts, then a piece of the canvas should be taken with you to the store for a sample.

Wallpapers of the same texture, but different colors are most often combined with each other. Combinations of plain materials with a pattern from one collection are also popular. In addition, combinations of canvases that differ in texture and color are possible.

Options for pasting walls with wallpaper of two types

There are several techniques for combining wallpaper on the walls, which can be used both in its pure form and in all sorts of variations. Here it is important to have a good idea of the desired effect.

Vertical finish

Vertical stripes that visually increase the height of the room are not necessarily arranged in the correct order. One wall can have striped wallpaper, while the rest can be painted or have a subtle pattern. But such a decision is not always made. Vertical stripes can be distributed along different walls, and they can be duplicated at a constant interval.

Stripes may vary in pattern and color. This combination requires the same wallpaper texture. In this case, it is most convenient to use one collection of products. It can have 2-3 plain backgrounds and various options drawings. It is very difficult to arrange wallpapers of different textures.

There is an interesting technique of vertical combination that allows you to visually increase the height of the room: one of the strips goes up to the ceiling, the transition border becomes fuzzy, which gives a feeling of increasing space.

Horizontal wrapping

This technique is a design classic. It has been used for a long time, but with today's variety of textures and colors of wallpaper, it has acquired a completely new quality. Horizontal division is often used in small rooms with high ceilings.

It can be a horizontal strip encircling the room, which is often located at the height of the window sills. In addition, such a strip is carried out in cases where the plane needs to be divided into three parts, while the border can be located in the upper or lower third of the wall.

There are violations of this rule: sometimes the strip is performed at eye level and decorated decorative elements. This technique is often used in the design of hallways and corridors.

The division zone may be upper. The lower part of the walls is traditionally decorated in dark tones, and top part- light.

Zoning of premises

Canvases of different colors, pasted on the walls of one room, can conditionally divide it into functional areas such as leisure and dining.

A similar principle applies in the children's room. Here, gluing walls with two types of wallpaper can serve when dividing the room into zones for games, a table or a bed.

With this combination of wallpaper, the use of canvases of different textures is allowed, but the separation of their sections by moldings is almost never used. They try to make docking in the corners of the room or select wallpaper in such a way that the joints are not particularly noticeable.

Wallpaper in the form of a panel

These types of wallpapers have been around for a very long time. Once upon a time, this material was made only from fabric, was framed, was insanely expensive and was available to rich people. From that time to the present day, this interior design has become a classic. For inserts, embossed, textured and silk-screened wallpapers are now used.

If the style of the room allows, wallpaper elements of a different color are placed in a frame made of molding. This performance fits well with the classics, country styles or Provence.

AT modern style modern similar panels can be made too. The frame in this case is made of material cut from the wallpaper.

Another option is to paste over the wall in a niche. At the same time, the selection of texture and pattern is made according to the style, and the wallpaper is used from one collection.

The selection of wallpaper can be carried out by a professional decorator, using his experience or flair. It is much more difficult for amateurs to do this.

Highlighting wall sections with wallpaper

This approach uses color accents material, it is applied according to two principles. One of them is designed to divert attention from an unsightly interior element, such as curved walls. So that such a defect does not catch the eye, the opposite wall is pasted over with canvases of a different color so that they immediately attract the eye.

Another technique involves highlighting the location of any piece of furniture. In bedrooms, this is usually the bed or the opposite wall. In kitchens, a table is often allocated, marking the eating area in this way. Partly this can be called zoning, partly - an accent.

Ordinary apartments do not have high ceilings, so the accent on their walls can be expressed by a vertically directed stripe. In a high room, accentuation can be done with a horizontal wide strip or some part of the wall.

Some rooms have niches or various protrusions of the walls, which the owners often try to disguise. But this should not be done. If such areas are highlighted with wallpaper of a completely different color, you can get an excellent design that will give the room a personality.

How to glue wallpaper of two types - look at the video:

With the help of skillful combination and use of a variety of contrasts of wallpaper, you can easily beat the flaws of any room in terms of its geometry, ceiling height, size, and also divide the room into functional zones. With a huge range of wallpapers, create interesting design its accommodation is very nice and easy. Good luck!

The building materials market offers wide range finishing materials, the use of which allows you to translate into reality an unlimited number of variations in the design of the walls of the room.

The leader among materials for wall decoration is still wallpaper, but their production technology does not stand still.

The new time demands a creative approach from manufacturers and the invention of new and original finishing methods. So not only new types of wallpaper appear, but also different ways their stickers.

Traditional methods are still used, but the method of combining wallpaper is rapidly becoming fashionable. Moreover, the process of combination occurs not only in color scheme, but also in terms of connecting wallpapers of various types and structures. Therefore, for example, now no one will be surprised by sticking wallpaper of two types in the living room or in the hall.

Why are we citing this particular room as an example? Everything is very simple. After all, she is the main one in the house. She welcomes and receives guests. It is the living room that becomes a great platform for family holidays and gatherings with friends. Therefore, it is this room that everyone is trying to decorate as creatively as possible.

Options for sticking wallpaper of two types in the hall, photo

The very process of combining wallpaper in the living room is not as simple as it seems at first glance. This or that interior looks very beautiful and creates the impression of ease in its creation. But in order to do something like this, you need to know how to stick two types of wallpaper in the hall, which rules form the basis of this process.

Without knowing the rules, you can make certain mistakes, then not only appearance rooms, but also the degree of comfort, the perception of the size of the room.

Therefore, you should approach the combination of wallpaper with all seriousness and pay attention to the layout of coatings with different textures and patterns.

Design for wallpapering in the hall of two types, photo

Combination in the hall: defining goals

Before sticking two types of wallpaper in his hall, each of the inhabitants thinks about whether he needs such a solution, what combination fit better, what will be the result, etc.? Such questions are completely obvious. Let's try to answer them.

First, you need to realize that the main purpose of such a solution is to obtain a certain decorative effect. And he will always be. It all depends on what is closer to your liking. For example, more calm and discreet wallpaper will help create more interesting and bright accents, motifs in the room. And the dark ones not only steal space, but also quite often oppress, put pressure on morally, create a feeling of discomfort.

Secondly, the combination of two types of wallpaper is a wonderful the possibility of zoning space. Having picked up the right shades, you can very easily divide the living area into sectors (zones). Traditionally, contrasting wallpapers are selected for such purposes. Companion wallpapers from the same collection are also often used.

Alternatively, and it will also be good, you can choose wallpapers that are similar in color. The “zest” will be made by different drawings depicted on the stripes.

Thirdly, the presence of two types of wallpaper in the living room is a good chance to hide flaws in the interior. The combination will help create a distracting design, “hide” a defect that is undesirable to see to the wrong eye. In such a situation, wallpaper with a relief structure will help.

The main thing - take into account the lighting and choose the right shade of wallpaper. In different lighting, each shade will behave differently. Therefore, to cope with the task, be sure to take into account these nuances.

Having become acquainted with the main goals, we understand that various options for sticking wallpaper of two types in the hall carry a solution to a specific problem. Therefore, the combined wallpaper for the hall is very a good option wall decorations.

How to glue two types of wallpaper in the hall: basic rules

Imagine that you have studied everything about wallpapering two types in the living room, consulted with experts, selected the right material and pasted the room, but you understand that something is not right, as if you got a slightly different result than you expected.

The situation is not the best, so we suggest that you familiarize yourself in advance and follow the basic rules for sticking wallpaper of two types:

Note! You have absolutely no skills in planning the design of a room, and expert advice does not help? The combination of selected shades is doubtful? Don't worry, there is a way out. Use wallpaper.

It is desirable that their color scheme of the selected photo panel includes a set of several shades that harmonize with each other.

Combining color and pattern

Is it easy to find a good two color wallpaper combination? Actually, it all depends on you. If you have a sense of taste, then it will not be difficult to do this. If you doubt that you are on the right track, then it is better to turn to specialists.

Since the combined wallpaper for the hall is designed to focus attention (make accents) on a certain surface or zone, it is worth considering in advance which zone you plan to highlight to attract attention. Give preference to wallpapers with bright background colors or eye-catching patterns.

Sticking wallpaper of two types in the hall, photo

But, choosing a catchy wallpaper, remember that you still need to somehow dilute the overall environment in order to muffle the contrast. The room should not turn into a bright farce. The most optimal and easiest option is to choose a calm shade.

Note! We do not recommend using different elements on the walls of the hall. They should be similar. Something radically different will spoil the overall look, and the ideal combination of wall coverings cannot be achieved. Therefore, you can pick up patterns of the same or similar subjects, similar surface texture, close tones from the same range of shades.

Let's talk about thematic patterns in more detail. There are three types of ornaments:

classical;
geometric;
floral.

Any of these types goes well with wallpaper of a single tone or with wallpaper in light shades with a barely noticeable stripe.

Wallpaper with a floral or floral composition is good to combine with wallpapers that imitate, for example, wood, plaster or stone, that is, natural materials.

If you prefer wallpaper with a geometric pattern / ornament or stripes, then pair them with wallpaper with abstraction.

Combined wallpaper for the hall will look great if you alternate them with each other - wallpaper strip No. 1, wallpaper strip No. 2, wallpaper strip No. 1, etc. So you will not create an emphasis on a specific area, but will bring a kind of "zest" to the overall perception of the room.

For ledges and niches in the living room, a vertical combination of wallpaper is ideal. different color. In addition to this option, landscape wallpapers are often used in the hall.

If you decide to combine wallpaper horizontally, then use a darker shade of wallpaper for the bottom part. Separation of wallpaper in this case is very often done using skirting boards or moldings.

In order to easily choose the shade of wallpaper for the living room, consider the following points: the layout of the living room and its area, the style of the room and the degree of illumination of the hall.

Soft shades will help create a warm atmosphere in the room: yellow, beige, blue, light green, peach.

Blue or blue, light purple or gray colors will help to relax. Overflows, for example, in sand, blue or pink colors will help emphasize harmony and airy lightness premises.

Given the above, it becomes clear that the design of wallpapering in the hall of two types will depend only on the choice of the owner of the home. But that's not all with regard to the combination of wallpaper in the living room. Next, we will talk about textured coatings.

We advise you to study the basic rules and see all the secrets and subtleties of creating spectacular and beautifully combined combinations for walls in rooms.

Read about photo wallpapers that expand the space in the interior, and see the photo: original decoration for stylish and modern rooms.

Combination and textured coatings

Recently, textured coatings that are intended for painting have become very popular. Such materials are widely used. Such wallpapers, for example, are very easy and convenient to use in work, not only for pasting walls, but also for ceilings. As a result, of course, we get the perfect combination.

Note that in the case of using textured coatings, there will be less problems with replacing them than with ordinary wallpaper, since their “life” is much longer. And repainting is easier than re-gluing.

To date, the most common textured wallpaper patterns are stripes of different thicknesses and orientations (diagonal, horizontal, vertical or chaotic), classic patterns, abstract strokes, floral and plant motifs.

Note! Well, in a duet with a textured coating, liquid wallpapers that match in color will look good. Use the "texture" to design various ledges and niches, columns.

Using textured wallpaper and liquid wallpaper is a good option, but remember that the most practical is a combination of ordinary wallpaper.

Sticking and types of materials

We ended the previous small section on what is best to use ordinary wallpapers for combining. But what about the combination of wallpaper different types? For example, wallpaper based on non-woven fabric, made of paper, vinyl or fabric coated.

Firstly, such a combination will require more attention from you. Secondly, sticking wallpaper of different types will take more time, because each type has its own characteristics when sticking, including the time of impregnation and drying.

Wallpaper sticker of two types in the hall, photo

As a result, we need glue for sticking different types of wallpaper. You can also use a universal type of glue, but before making a final decision and buying such glue, consult with specialists. Universal things are not always so universal. Maybe it's worth buying a specialized glue?

The most difficult duet when sticking wallpaper of two types will be a couple: standard wallpaper+ textile coverings. Joints with this combination cannot be hidden, so moldings, borders and skirting boards should be used.

Combining, we create harmony

The main task of combining two types of wallpaper, as well as any repair in general, is an excellent result. And this means that as a result we must create a harmonious environment. Achieving such a result will be a little more difficult, but it is real. Additional accessories and the details will only help you complete your plan.

A small summary

Combining wallpaper is a fascinating activity, but there is something to think about. BUT different kinds wallpapers only fuel interest. Many have already convinced themselves of the originality, practicality and beauty of the interiors of the hall, decorated with the help of combined wall coverings. Make sure you too!

An end to our article will be put by a video that will demonstrate various options for combining two types of wallpaper. Watch carefully, maybe the video will tell you a suitable idea?

If the ideas from the video didn’t seem enough to you, there are 28 more photos in the gallery below with options for combined wallpapering in the hall:

Options for sticking wallpaper of two types are quite common. After all, design decisions are made in order to highlight the room. And gluing two types of wallpaper is often used in this direction.

Today we will tell you how wallpapering of two types is done, what needs to be foreseen, and you will also receive the necessary recommendations for this type of work on photos and videos.

Wallpapering in two types

There are various reasons why designers choose to wallpaper walls with combined wallpaper. So that the walls do not represent a monotonous color spot, the changeability of different textures of wallpaper of the same color is used. And almost everything can be done by hand.

In what cases resort to a combination:

Room with high ceilings with small footage;
The disproportionate length and width complicate the layout;
The room needs to be divided into separate zones;
There is a desire to dilute the situation, using a large plane (one of the walls);
It is necessary to emphasize some individual elements of the situation;
The task is to establish a visual connection between adjacent rooms.

Common types of combination

There are two types of wallpaper sticker options in in large numbers, this is starting from a combination of different material backgrounds with the same structure and ending with a different relief texture of the material. Let's look at how wallpapering in two colors is applied in practice.

A popular option is to divide the wall horizontally. This method is suitable mainly for high ceilings.
We divide the wall according to the proportion 1:2. The butt line can run both at the bottom and at the top of the room, of your choice.

Settled combinations:

Striped wallpaper - bottom, plain - top;
Small pattern - bottom, large pattern - top;
2/3 - a pattern with large stripes or flowers, 1/3 - canvases of the same tone.

If you are distinguished by a creative approach and a desire for elegance, the use of moldings is suitable to distinguish between different canvases ( decorative overlays). This patch is glued on top. But you can make a tie-in and directly into the surface.
Another option is vertical striping. As a rule, it is used in order to achieve the trick of the illusory "pulling" of the walls.

When it comes to pasting the walls of the corridor, we recommend choosing washable wallpaper with the following combination: dark colors - down, light - up.

Here are a number of vertical alignment options to choose from:

We connect two walls. We choose two prevailing colors, on one of the working walls we perform alternation, making the color change deliberately smooth. It is allowed to paste strips after 1-2, it is no longer worth it.
We alternate asymmetrically. We highlight the center of one of the selected walls with a saturated strip that attracts attention.
We paste over the opposite wall with medium stripes of a similar catchy color, and all the remaining space will be occupied by background canvases. This technique will help visually increase the size of your room.
We alternate symmetrically. On top of the background canvases in the center of the room, we glue wide saturated stripes. This technique will add dynamics, but will bring the effect of some narrowing of the room. It is better to immediately decide whether such a task is before you.

Recently, more and more often they resort to redevelopment with the installation of light partitions. Is it permissible in this case to glue the wallpaper directly on the plywood? Experts give a clear positive answer: it is permissible. Moreover, the existing base can also be used as an element of intermittency of colors.

Consider the following design solutions that you may find useful. One of them is highlighting with color or texture.
For this purpose, you can use a wall covering that has become very fashionable - glass wallpaper (see Fiberglass wallpaper and interior use). This material has a very interesting texture, reminiscent of fiberglass fabric, and perfectly emphasizes such relief elements as ledges, niches and arches.

If bright colors are used as a background, then a relief element of the interior, pasted over with wallpaper of the same tone, but with a different texture, will clearly stand out against the general background.

In what cases is it used to highlight a section of a wall with a different color:

The task is to delimit the room into separate zones;
It is necessary to emphasize a fragment of the interior and not allow it to merge with the general background;
It is necessary to highlight the primary detail, which will set the mood for the entire interior according to our plan.

Companion Wallpapers:

Visually reduce the size of the room will help the contrasting finish of selective walls;
Relief combinations and combinations of a number of patterns will also help emphasize design features;
Enfilade-type room transitions (without doors) can be enhanced with color highlighting, while the contrast is balanced by catchy color spots.

Glass fiber and molar fiberglass can find their use as wall panels. A creative approach is gaining popularity, which consists in creating color spots on the walls and enclosing them in baguette picture frames (see How to hang pictures on the wall: options). Agree, a very original way to enliven the situation and decorate the interior in a non-trivial way.

Deciding on the design that suits us is not always so easy. That is why designers turn to various techniques and in different occasions combine all of the above methods. One of them will definitely transform our room in the best way.

Arch decor

A separate topic is the decor of arched openings between rooms (see Decorative arch decoration: how to do it). Let's look at how to properly wallpaper the arch.

What we need:

Scaffolding (you can use tables, stools);
Wallpaper directly;
Glue suitable for working with these wallpapers;
Roller and special spatula for smoothing;
Measuring tool and stationery knife for cutting.

Procedure:

We cannot do without stable scaffolding. However, it is not necessary to spend money on purchased building platforms, although they are very convenient, quickly assembled and disassembled. You can use a table or scaffolding from the boards;
For arched decor, it is recommended to choose wallpaper with a small pattern that is not conspicuous;
Be sure to first make sure that the wallpaper prepared for pasting corresponds to the type of glue. Universal glue will do an excellent job with light canvases, but heavy vinyl and interlining will need PVA-based glue;
It is necessary to correlate the pattern in the arch with the pattern on the wall, make markings and start cutting the roll into sheets;
First glue the front, then back wall arches. Keep in mind that you need to leave some room at the edges for the hem;
We decorate the center of the arch last. This is done by means of one canvas: from floor to floor evenly throughout the arch.
We hope that now such a simple and detailed operation, as pasting arches with wallpaper, will not present any difficulties for you.

About the type of base and working directly with plywood

Various base materials - natural, painted or plastered - all of them have their own characteristics when pasting wallpaper.

Let's consider measures for sticking wallpaper on plywood.

With such gluing, pay close attention to the procedure for covering the seams with a primer and, if necessary, gluing them with paper strips.
Drown the protruding nails into the thickness of the plywood, after which it is good to coat with varnish. If you decide to prime the work surface, this will increase the adhesion of the plywood to the canvas.

You can start. We trim plywood with artificial stone:

As an interior element, artificial or decorative rock very convenient and popular in the design of modern premises. However, we are more concerned with the question: is it permissible to glue it on the wallpaper? The answer of experts is negative.
Wallpaper should be glued to the surface in question with an overlap.
An artificial stone will keep very poorly on a vertical plane if it is lined with a smooth material.

We combine wallpapers

Let's take a look at one of the most common design techniques- combination of wallpaper.

Attention: Before starting the repair, we should already have a more or less intelligible idea of what we want to see the room when the repair is completed.

Don't be afraid to experiment with textures and colors. They will be justified provided that the functions and features of the premises are assessed correctly.
Taking into account all the available factors, from the dimensions of the room to the nuances of the layout, we choose the most suitable method of wallpapering.
The methods discussed below can be applied to any standard interior. If the room has a non-standard layout, obviously, you will need to show more imagination and combine several types of alternations.

vertical stripes

The option with vertical stripes always adds dynamics to the interior. You just need to use two types of stripes of different colors and textures.

You can work with a combination of shades of the same color, but you can also apply contrasting combinations. In the first case, we strive to achieve a play of shadows, in the second, we emphasize the originality of our interior solutions.

horizontal stripes

Many owners choose a horizontal finishing method. Why not? After all, it fits into absolutely all known design styles, allows you to alternate wallpapers of any shades and textures.

So:

What exactly to alternate is a matter of personal preference. But pay close attention correct selection width.
For example, in rooms with high ceilings, our experts advise combining stripes in a ratio of 2:1.
The combination of non-woven and textile wall coverings makes a tremendous impression - a kind of game of lurid relief and delicate outline.
You can diversify the procedure for pasting walls with wallpaper with the help of additional decorative elements.

Attention: Determine the butt sections before gluing the strips, mark them with a line parallel to the floor level.

Horizontal finishing is carried out from top to bottom, in the area of \u200b\u200bthe butt sections we provide for an overlap, we will cut it off at the very end.
If the gaps that have arisen during gluing become noticeable, you will have to hide them with a border or a special tape for such purposes. However, the borders will add grace, even if you do not need to hide the flaws.
Often the canvases differ markedly in width. The use of decorative elements such as polyurethane moldings and wooden slats, will solve this problem without much difficulty.
One of the most original methods is the wallpaper paste method. But such a design is carried out exclusively on well-prepared walls.
First of all, we glue light background wallpaper. Behind them are prepared inserts, which can be quite thick, massive and of various shapes. Rectangular inserts are more often used, but you can come up with an ensemble from others. geometric shapes- it all depends on your imagination.
In the children's room, inserts depicting heroes of fairy tales and cartoons will look very cute and funny.

Ways of pasting walls

Depending on your preference, here are a few of the more common uses for the combination:

. It is a natural and safe material imitating fabric.
In the living room, you may need to visually divide the room into functional areas. Combined wallpaper will calmly cope with this usual task, giving semantic content to each separated section of the room.
In the hall we can offer to try the method " accent wall". Its essence lies in the fact that we make the wall behind the TV, which usually occupies the dominant place, significantly contrasting with the background of the rest of the room. The effect will be amazing.

Non-standard design methods

Types of wallpapering of two types are selected depending on the design and style of the room. The price of the material can be any, the main thing is to choose the right combination.

We have already considered variations with wallpaper inserts. But what if we go further and cover the walls entirely with some inserts, even without the use of a seemingly obligatory background? This bold and creative way of gluing is known as patchwork.
It looks a lot like a patchwork quilt from a distant childhood, doesn't it? Such a design is unlikely to leave without vivid emotions.
But it is important to observe the color measure and overall harmony. You can glue any wallpaper inserts, but you still need to have an idea that unites the existing ornament.

Attention: If the room in question has a lot of relief elements, stop considering them as planning inconveniences, but rather use all the available arches and ledges to create a truly original interior!

Try not to hide once again all these inconvenient elements, but on the contrary, risk highlighting them.
Wallpapering in these places is carried out with contrasting canvases. If the rest of the wallpaper is light, make the existing recesses dark. If the rest of the pattern is shallow, choose a more impressive pattern for the ledges!

Buy wallpapers in the same department to avoid color and texture mismatches.
Try to use canvases of the same width.
Combine not only for visual reasons, but also to correct layout flaws.

Wallpapering options in two colors can be quite different, and here you must take into account the style of the room. The instruction will help you choose the right solution and make the room unique.