How to glue non-woven wallpaper: a step-by-step description of the process with photos and videos. How to properly glue wide meter or standard non-woven wallpaper on the wall: what glue to glue, work technique How to glue non-woven wallpaper with each other

26.03.2020

One of the most common materials for interior decoration the premises for today remain wallpaper. Over time, thanks the latest technologies, the old paper coating has given way to non-woven wallpaper, consisting of synthetic fiber, polymer binder and cellulose, which has unique properties and a wide variety of textures. How to glue non-woven wallpaper according to all the rules should be considered in more detail.

Non-woven wallpaper consists of synthetic fibers, a polymer binder and cellulose.

Preparatory work before wallpapering

Before sticking wallpaper, it is necessary to carry out preparatory work. It consists:

in the selection of material and tools;
in surface preparation;
in fitting wallpaper;
in the cultivation of glue.

First of all, you need to choose non-woven wallpaper yourself, which can be of 2 types: white color(for further painting) and with the application of a layer of PVC, decorated under a stone, fabric, textured plaster, etc.

The following materials and tools will be useful for work:

primer;
putty;
antiseptic;
wallpaper glue;
container for glue;
sandpaper;
rollers;
spatulas;
brush;
spray;
building level;
pencil;
roulette;
ruler;
sharp knife;
soft sponge;
ladder.

After selecting all the required materials and tools, you need to start preparing the surface of the walls or ceiling. Be sure to remove all the old coating from it. To do this, you can use warm water, a sponge and a metal spatula. If there are corners with mold, they must be cleaned and treated with a special antiseptic composition against rot and fungus. All cracks and various damages found on the surface must be repaired with putty and a spatula. After the composition has dried, it is necessary to process the surface with sandpaper for evenness. When working with non-woven wallpaper, there is no need to strive for an ideal evenness of the surface, because. their unique texture will mask small imperfections.

For better adhesion of wallpaper to the surface, it is necessary to use a special primer, which is applied to the surface with a brush or soft roller. After that, time is allowed for the surface to dry.

Now you need to prepare the wallpaper. It should be started by checking the pattern and color of the wallpaper rolls for similarity. In advance, each canvas is measured and cut with a sharp knife to a given size, adding 5-10 cm from the bottom and top. If the wallpaper is with a pattern, then it is sure to be selected. Each canvas can be numbered from the wrong side with a pencil.

Special glue for non-woven fabrics is prepared immediately before gluing. The dry composition of the adhesive is diluted in cold water in accordance with the proportions indicated on the package.

Back to index

Basic work on gluing non-woven wallpaper

Now we can proceed to consider detailed instructions how to glue non-woven wallpaper. The process of wallpapering itself, especially after quality training, is not particularly complex. You can glue the walls yourself, but you will need an assistant for the ceiling.

It is necessary to start work by closing windows and doors so that there are no drafts that can adversely affect the wallpaper. With the help of a pencil and measuring instruments, you need to mark a flat vertical line, which you should later focus on. Wallpapering should be started from the corner next to the window, moving from top to bottom. In this case, the wallpaper joints will be the least noticeable.

The technology for gluing this type of wallpaper is as follows: a special glue is evenly applied with a roller on a flat surface of a wall or ceiling, to a width slightly greater than the width of the wallpaper. One of the features of such a repair is that glue is not applied to non-woven wallpaper. An important point repair is the correct pasting of the corners. Each corner should be well smeared with glue with a brush. Only in the corners of the wallpaper canvas overlap each other by 5 cm. Moreover, the first canvas is pasted from the very corner. If the angle is not quite even, then the wallpaper can be cut a little according to its configuration and glued.

The prepared wallpaper is pressed against the surface smeared with glue, exactly along the vertical line marked on the wall with a pencil.

The wallpaper is smoothed out with special rollers, in the direction - from the middle to the edges, in order to expel the air trapped under the canvas. Work should be done carefully and avoid getting glue on the front of the wallpaper. If this happens, then you need to immediately remove the glue with a damp sponge.

After gluing the 1st canvas, you need to glue the surface for the next one. The canvas is laid end-to-end to the edge of the previous one and carefully smoothed out with rollers.

Special attention needs to be paid to work on difficult areas walls - next to sockets, switches, radiators. Near the floor, the wallpaper is reinforced with skirting boards, and near the ceiling - with edging or skirting boards.

If you wish to paste over the ceiling with non-woven wallpaper, work is carried out in a similar way. But in this case, you will have to use the help of an assistant.

Thus, knowing the technology and having everything you need at hand, it will not be difficult to glue non-woven wallpaper. Due to its unique composition and many positive properties, the finishing material will delight and amaze for years to come.

The question of how to glue non-woven wallpaper worries many who have chosen this practical and high-quality material. Its main feature is a thickened structure, thanks to which it is possible to successfully hide minor wall defects. The non-woven coating is wear-resistant, moisture-resistant, light-resistant, maintenance-free and has an original embossed surface. If you want to change the interior design, such a coating can be repeatedly painted with dispersion or acrylic dyes. The very process of pasting the walls is simple and does not take much time, you just need to familiarize yourself with some secrets of working with wallpaper.

Sticking non-woven wallpaper with your own hands has some features. To know how to glue non-woven wallpaper correctly, we advise you to familiarize yourself with the following recommendations to avoid mistakes during work:

before starting work, be sure to read the instructions from the manufacturer attached to the rolls and to the packaging of the adhesive mixture;
Before gluing the canvas, prepare the surface of the walls. Proceed to gluing only after the primer has completely dried;
pay close attention to gluing the first workpiece - the quality of the entire work directly depends on this;
the glued sheet should be leveled with a rubber spatula (if the surface of the wallpaper is smooth) or a wallpaper roller (if the canvas has a textured surface);
each next sheet must be glued without overlap - strictly end-to-end.
If this is not possible, for example, when gluing the canvas in the corners, use the double cut method: by laying two sheets on top of each other by 5-6 cm, you need to make an even cut with a clerical knife at the junction, then carefully remove the excess. Thus, the corners will be perfect;
the joints of the sheets (especially the corners) should be carefully ironed with a spatula or roller, removing excess glue to the side free from wallpaper;
to remove excess glue, use a damp sponge, carefully wipe the seams in the corners, do not worry about the condition of the canvas - moisture will not damage it.

The preparation and marking of the walls is an important point that should be given special attention before gluing non-woven wallpaper. You should also cut the sheets correctly and choose the appropriate composition for gluing them.

Preparatory work

Non-woven wallpaper can be pasted over any surface. If you plan to paint the wallpaper in the future, you should take care in advance that the walls have a uniform color that does not differ much from the color of the selected paint, since non-woven is a thin material and the color of the base may be noticeable in the future.

VIDEO:

The walls should be pre-cleaned (remove the old coating) and eliminate existing defects. Then it is necessary to carefully treat the surface with a primer, it is better to apply a primer deep penetration- this will increase the adhesive ability of the adhesive. After the final drying of the primer, you can proceed to the marking of the walls. It is recommended to start pasting meter-long wallpapers from the corner - use a level to apply vertical lines to the walls at a distance of 1 m from each other, this will avoid irregularities and shortcomings in the work.

The next step is to prepare the canvas. If you have chosen a solid material, there are no problems with cutting. If you plan to glue a canvas with a pattern, make sure that it matches, for this you will have to periodically shift the next sheet up or down. Be sure to leave a margin of height of 5-7 cm when cutting - an allowance for the ceiling, cut off the excess part with a clerical knife after complete drying.

Sheet cutting must be carried out on a clean surface, rolling the roll face down. Having measured the desired length of the workpiece (taking into account the margin), you should make a notch, evenly bend the sheet (make sure that the edges of the lower part of the sheet coincide with the edges of the bent part) and cut it along the fold line. The next workpiece must be rolled out in the same way and before cutting, check the fit of the pattern. Further work is performed in a similar sequence.

After preparing the walls and the canvas, you can begin to solve the following question - how to glue non-woven wallpaper correctly? An important point is the choice of a suitable glue, the quality of the final work depends on it.

Choosing glue

For pasting walls with non-woven wallpaper, you should use a certain adhesive composition, which can be purchased at a specialized store selling building and finishing materials.

Before preparing the adhesive mixture, carefully read the instructions for the sticker process technology that is attached to the wallpaper - some manufacturers recommend applying glue not only to the walls, but also to the canvas itself.

It has a number of advantages:

does not contain toxic substances and is absolutely safe for human health;
has excellent adhesive properties, allowing the mixture to be applied to any surface;
convenient to use;
does not leave stains;
has a long shelf life in a closed container (up to 10 days).

The process of making the adhesive mixture itself is not complicated - the powder should be diluted in the amount of water indicated according to the instructions, constantly stirring until the mass thickens.

How to glue meter non-woven wallpaper

Sticking non-woven wallpaper with your own hands is not a laborious process, but if you have chosen a meter long canvas, you should take into account a few nuances. Many prefer exactly meter rolls, since this greatly facilitates the pasting process, there are fewer joints and less material consumption.

VIDEO:

How to glue non-woven wallpaper 1 meter wide? Consider the basic rules:

The main task is to carefully prepare the walls - their surface should be even and smooth. The walls should be pre-treated with putty and primer - this will level the walls and improve the ability to bond the adhesive mixture to their surface.
With improper cutting of meter-long wallpaper, you can often encounter a shortage of the length of the last sheet. In order to avoid this situation and save material, before sticking the sheets, we recommend that you pre-stick ceiling plinth to a clean wall, avoiding the need to set aside allowances (if such a finish is expected in advance).
If you are sure that the ceilings are even, it is enough to leave a 2-3 cm margin when cutting sheets. If the ceilings are uneven, you should leave more margin - up to 10 cm.
You should not start gluing meters strictly from the corner, draw an orientation line in advance, stepping back a little from the edge of the wall - this will avoid distortion of the pattern if the corners of the room are uneven.
Smoothing the canvas glued to the wall should start from the top, gradually moving towards the center and leveling the edges of the sheet.
The edges of each subsequent sheet should be applied as close as possible to the adjacent canvas, aligning the seams and tracking the pattern if you chose a non-monochrome coating.

Before starting work, be sure to study all the recommendations and prepare necessary materials- This will greatly facilitate and speed up the process.

How to glue wallpaper in hard-to-reach places

The question of how to glue non-woven wallpaper in hard-to-reach places, especially in the corners, is important. Difficult places also include areas with sockets, switches, and near batteries. When sticking the canvas near sockets and switches, you must first de-energize them and unscrew the protective boxes. Thoroughly coat the wall with glue, attach the sheet, and only after the glue has dried, make a cut of the required size, remove excess wallpaper and screw the boxes into place. When sticking the canvas near the batteries, carefully treat the edges of the sheet with adhesive. Corners require special attention. There are two options for successful wallpapering in the corners:

BUT. If you have chosen a plain canvas, you need to stick it, starting from the corner, then glue the next sheet on the adjacent wall, grabbing part of the glued canvas, and then evenly cut both canvases with a clerical knife, removing the excess.

B. If you prefer a canvas with a pattern, the sheet is also glued from the corner, and the overlap with the next canvas should be 2-3 cm - this will hide the flaw in case of an uneven corner.

Date: 06.06.2017

Starting to repair, many are wondering how to glue non-woven wallpaper? First, it is worth explaining what the term "non-woven" means.

Interlining is a material of non-woven structure, created like ordinary paper from cellulose fibers. It is not surprising that in appearance such wallpapers resemble paper. Hence the second name - "improved paper", which interlining received due to the properties of high strength and fire resistance.

Types of non-woven wallpaper

It's no secret that non-woven wallpaper is called non-woven wallpaper, which contains non-woven fabric.

Non-woven wallpaper

Exist a large number of varieties of wallpaper, but among non-woven wallpaper there are two main types:

Wallpaper, completely consisting of interlining.
Vinyl coated non-woven wallpaper.

Both wallpapers are popular in the wallpaper market, and many consumers give their preference to these categories of wallpapers. However, when it comes to the gluing process, the question becomes pressing.

To begin with, let's answer one equally important question: why choose non-woven wallpaper?

There are a number of reasons for this:

Non-woven wallpaper has a high degree of strength.
Do not fade in the sun.
Meet the requirements of fire safety.
Keep warm.
Don't let sound through.
Wide range of products on the market.
Presented in a different price range (from economy class to premium class).
Easy to clean, not afraid of water.

How to glue non-woven wallpaper

The basics of how to glue non-woven wallpaper

Each of us at least once in his life glued wallpaper, and approximately represents this process. For such people, their valuable experience will be a significant plus. After all, the process of pasting wallpaper with interlining in its composition is practically no different from pasting ordinary wallpaper.

If you have never been engaged in this type of repair, then you will find a lot of new and unexpected discoveries in this area.

The gluing process includes three main stages:

Preparatory.
Sticking.
Final.

During the first stage, it prepares the ground for further work. Namely: there is a choice of wallpaper, the purchase of glue and the necessary tools, cleaning the walls of old wallpaper, leveling the walls, puttying, priming, cleaning dirt and debris, diluting the glue.

Tools for sticking non-woven wallpaper

Not all of the above points must be observed without fail. For example, if the walls of the room in which it is planned to carry out repairs are even, then the stage of leveling, puttying and priming the walls can be omitted.

Turning to the second stage - gluing, it is worth saying that this is a key moment, which will give the desired result. That is why to this stage must be taken with great responsibility.

The third stage - the final one, includes all the work to bring the newly pasted room into cleanliness and order.

And now more about each of the stages.

Alignment of walls for non-woven wallpaper

How to glue non-woven wallpaper: preparatory stage

Wallpaper selection

Having decided to carry out repairs in the house, first of all, you decide for yourself what look you want to give your home. If earlier the walls of dark shades prevailed in the house, now you may want to bring more light colors into the rooms. Or dilute the design home interior bright juicy colors. The choice is yours.

The pattern depicted on the wallpaper is perhaps the most important problematic component when choosing a new wallpaper. However, there are others. These include such parameters as: size (in length and width), strength, moisture resistance and others.

Purchase of glue and tools.

How to glue non-woven wallpaper when they are already purchased, but missing the right tools? The gluing process is not so much dependent on necessary tools, how much from the presence of wallpaper, glue and prepared walls.

The choice of non-woven wallpaper

Non-woven wallpaper sheets require a special professional non-woven adhesive. It is bought at any hardware store, or ordered from an online store (depending on desire).

Speaking of the required tools, it is better (although far from necessary) to purchase a professional paint roller, a regular wallpaper roller, a wallpaper roller for corners, a sponge, a tape measure, scissors, a knife, a pencil, a rag, a bucket, a basin - the list goes on. The most necessary from the list are a roller, a knife, a basin and a supply of clean rags (the fabric will be needed to remove unnecessary traces and keep the floor of the room crystal clear).

Wall cleaning

The more seriously you approach the internal preparation of the room in which the pasting will take place, the more fruitful the process will be and, accordingly, the more harmonious the result.

Ripping off the wallpaper

Before proceeding to the answer to the question of how to correctly glue non-woven wallpaper, free up space in the room and take care of separating old wallpaper from the walls. If you plan to glue from scratch, on bare walls, then this is the second question.

So, what does the preparation of the room include? Remove paintings, mirrors and other interior items from the wall that interfere with the gluing process. To ensure that the wallpaper does not tear or deteriorate during gluing, knock nails out of the walls. To do this, you can use a nail puller, or a drill (if there are screws screwed into the walls).

If there is a lot of furniture in the room, the objects must be moved to an adjacent room for the duration of pasting. The approach will free up the necessary space for spreading fresh wallpaper.

When tearing off old wallpaper, go through the dirty corners of the room with a broom, collect the remnants of debris from the floor so that dirt and dust do not stick to the wallpaper

Ripping off the wallpaper with a spatula

Wall alignment

How to glue non-woven wallpaper on uneven walls, will the image be distorted and will they deform subsequently? - These and other questions are asked by people when planning repairs.

Uneven wall surface a big problem for households. But the problem does not need to be reconciled, it just needs to be fixed. The action is easy to do, the main thing is to know the basics of putty with a primer. All that is required of you is to breed cement-sand mortar and carefully, using a special tool, apply to clean walls. Mastering the skill of a plasterer is easy and interesting, do not be afraid to boldly learn the professional art.

How to glue non-woven wallpaper: the gluing stage

Having passed preparatory stage work, proceed to the main part - gluing. The first thing to do is measure the height of the room, prepare the wallpaper.

Measurement of room height

After releasing the first roll of wallpaper from the packaging, stretch the roll to the entire height of the room, make a mark so that you know where to cut off the wallpaper sheet.

Tip: if the height of the room of the room area is the same, you can prepare several wallpaper sheets, this will save you from having to measure the sheets one by one.

Having prepared the sheets for gluing, dilute the glue. Recall that the glue must be non-woven, otherwise the wallpaper may not stick.

Glue dilution instructions are on the package. In order to prepare the desired consistency of glue, you will need several liters of clean water, as well as a deep container (preferably a basin).

Tip: do not dilute all the powder at once, the glue may turn out to be too much and it will deteriorate.

Given that the glue quickly sours, it is better to make it in small parts. So you save powder and save yourself from unnecessary purchases at the next repair.

Applying glue to the walls for non-woven wallpaper

So, having cut the strips and spreading the glue, the question of how to glue non-woven wallpaper can finally be resolved.

Apply the prepared adhesive with a sponge or a clean cloth to the wall. It is necessary to maintain an adhesive application distance equal to the width of the wallpaper. This technique will avoid premature drying of the paint and save it.

Once the adhesive has been applied to the wall, take the first sheet of wallpaper (preferably with a second person to help) and gently lean it against the damp wall. Start smoothing the canvas from the center to all sides until the sheet is snug against the wall. If there are bubbles under the wallpaper, carefully poke them with a needle: the air will come out and the ugly bumps will disappear.

Smoothing non-woven wallpaper on the wall

During gluing, a layer of glue that is too greasy can go beyond the wallpaper. In order not to stain them, wipe it with a rag.

Thus, one by one, glue the wallpaper strips end-to-end to each other.

How to glue non-woven wallpaper: the final stage

The gluing process is completed and you can be congratulated, however, do not rush to bring things and furniture back into the room. First of all, look carefully at the bottom and top of the walls: do the edges of the wallpaper look harmonious? It might not hurt to trim them, for this, take a sharp clerical knife, and carefully align the curved edges.

Feel free to throw away the tiny remnants of wallpaper, save large shreds: they can come in handy. If the diluted glue remains, but you do not plan to glue it in the near future, it is better to get rid of it. Gently seal the untouched powder and put it away to the remnants of the wallpaper.

Tip: Do not open windows during and after wallpapering. They can't stand the flows fresh air and start peeling off.

Removing the edges of the wallpaper and removing construction material, wipe the floor in the room in several waters: the adhesive solution is hardly washed off. In order for the floor not to remain sticky, it is enough to wipe the floors three times warm water with detergent.

On this, the pasting process can be considered completed. After about a day, the wallpaper will dry completely, and the interior of the house will take on a new shape. Now you have invaluable experience in gluing non-woven wallpaper, and in the future it will not be difficult for you to repeat new skills.

How to glue non-woven wallpaper

Non-woven wallpaper is a modern finishing material that has proven itself well. With it, you can bring to life the most incredible design solutions. In addition, they can be pasted over the walls of all rooms of the apartment, including those with high humidity. However, non-standard sizes of wallpaper for Russia (wide sheet size, 2 times larger) and another, different from paper wallpaper, gluing technology, require careful study of how to glue non-woven wallpaper yourself.

Non-woven wallpaper is a multilayer nonwoven fabric from modified cellulose fibers (70%) and binders (30%), which also contain additives of polyester fibers.

Unlike plain paper, this type of material has high fire resistance, tear strength and abrasion resistance. By appearance it resembles paper of a white or yellowish color, in structure - fiberglass, to the touch - elastic fabric.

In the production of tapestries, interlining can be used in combination with other types of wallpaper material: vinyl and paper. In everyday life, it is also customary to consider them as non-woven wallpaper. But this independent species wallpaper fabric:

non-woven vinyl wallpaper;
wallpaper for painting, where the bottom layer is non-woven, the top one is paper.

Classics are considered light, smooth wallpaper from only non-woven fabric. They will be discussed below.

Advantages and disadvantages

Non-woven wallpaper has many advantages:

have a huge number of design solutions;
durable, thanks to which they have a long service life;
have high moisture resistance, which allows you to do wet cleaning not only of the floor, but also of the walls (can be washed using special tools);
do not absorb odors;
dense, easily hide minor flaws on the wall surface (microcracks, roughness);
vapor-permeable, which makes it possible to paste them over any premises (entrance hall, children's room, bathroom, etc.);
environmentally friendly;
do not support open flame combustion (have high level fire safety);
elastic - stretch when the glued surface is deformed (shrinkage, microcracks, etc.), which is important for newly built houses;
do not fade under the influence of ultraviolet rays;
easily removed for replacement
technological:

applying glue to the wall greatly simplifies the pasting process (wallpaper sheets do not get wet from the adhesive mass, which makes it easy to join them and customize the pattern);
can be glued on any substrate (concrete, cement and gypsum plaster or putty, wood, drywall);
having a width of 1.06 m (standard for Russia), they reduce the number of seams, which reduces the time for gluing tapestries on the wall;

There are also disadvantages:

high price (the cost of 1 roll is about 1.0 thousand rubles, which makes them inaccessible when repairing the entire apartment for people with low incomes);
transparency - even the inscription on the GKL shines through them, not to mention the color spots on the wall;
retain traces of glue that has fallen on the front side.

Surface preparation

Quality and durability of wall finishes modern views wallpaper is largely determined by the level of surface preparation. First of all, this applies to non-woven trellises, although there is another point of view among non-professionals that they can be glued to old wallpaper.

From a technological point of view, such an approach is possible - the non-woven fabric is light and the glue will always keep it on the tapestries that have served their time. But from the aesthetic side, such a finishing option is impossible - through the newly pasted sheets, the old pattern will be very clearly visible, unless of course the previous wallpaper is plain, with a light color scheme.

The whole process of preparing walls for wallpapering is discussed in detail in the work “How to prepare walls for wallpapering”. Let us briefly recall what was discussed there.

Before finishing the apartment with wallpaper, you must perform the following work in sequence:

clean the walls of old finishes and, if necessary, of plaster;
repair the formed microcracks, delaminations, shells, etc.;
prime the surface;
level uneven walls with cement-sand or dry (drywall, plywood, etc.) plaster;
putty the surface of the plaster;
treat the surface on which the tapestries are glued with a primer.

Tools and materials

Sticking non-woven wallpaper requires the presence in the workplace:

rolls of non-woven tapestries;
specialized wallpaper glue for interlining;
plumb or laser level;
roulettes for 3 m;
regulations;
wide metal spatula;
a knife with a removable blade;
a simple pencil;
hand towels;
cuvettes for glue or a special mesh for removing excess glue from the roller if it is dipped into a container with glue;
a pile roller (foam rubber unevenly applies glue to the wall);
a rubber roller for rolling wallpaper (you can use a special plastic spatula for tapestries);
cone-shaped roller for processing joints;
foam rubber sponges;
plastic bucket for clean water.

Wallpaper preparation

After the type of wallpaper is selected for each room, the color and pattern that fit into the overall design solution for the interior of the apartment, finishing material is bought. Here it is very important to take all pipes of the same article and one change of release, so as not to get a problem different shade in various wallpaper rolls.

Quantity calculation

When calculating the number of rolls needed for repairs, you cannot use special tables, where, based on the perimeter of the room and the height of the ceiling, the required number of tubes is given - non-woven wallpaper has a different width.

The calculation begins with determining the area of the walls (the length of the wall is multiplied by the height and all the results are summed up). From the result obtained, the area of \u200b\u200bdoor and window openings is subtracted. The resulting number is divided by the area of 1 roll.

With dimensions of 10x1.06 m, the area of one tube is 10.6 m 2. However, experts do not take into account the decimal value of the indicator and divide by 10. To the result obtained, 1 roll per room is added for pasting corners, door and window openings and 1 tube for every 6 rolls, if necessary, adjusting the pattern.

Glue preparation

The durability and quality of wall decoration with non-woven wallpaper directly depends on the type of adhesive chosen. He must:

have good adhesion to trellises;
diluted to a thick consistency, which allows it to be applied in a thin layer without smudges;
do not leave marks when dry - do not turn yellow.

Only specialized glue satisfies such requirements - universal even light non-woven trellises hold poorly. We note here that there are two types of special glue: for light and heavy wallpaper.

Attention: heavy tapestries are represented by vinyl with a non-woven backing (vinyl tapestries). So here we are talking only about glue for light (purely non-woven) types of wallpaper.

Which glue to choose

On the shelves of hardware stores you can see a huge variety trademarks wallpaper glue for interlining. But, due to the lack of reliable information about the quality characteristics of unfamiliar brands, it is better to buy well-known brands.

The cheapest glue from recognizable brands, which is due to Russian origin (250 g package from 200 rubles, 500 g from 399 rubles). Suitable for all types of non-woven trellis, including heavy vinyl wallpaper.

Provides good sliding of a sheet of wallpaper on the wall during docking. Contains additives against mold and fungus. Can be stored undiluted for up to a week. At the same time, it also has disadvantages:

poorly bred - it is difficult to obtain a homogeneous mass;
not suitable for tapestries with a three-dimensional pattern - it requires tight rolling, which cannot be done with a rubber roller on embossed wallpaper (a wallpaper spatula cannot provide such an effort).

The product of the famous German company Henkel. It is made from methylcellulose and natural resins, which provide reliable adhesion of all types of non-woven wallpaper with various types walls (drywall, concrete, cork, brick, etc.). Easily bred.

Does not leave stains when it gets on the front side. It has an important feature: it must be diluted to a more liquid consistency than indicated on the package, as it dries quickly. It is in the middle price category - a pack of 250 g from 290 rubles. up to 350 rubles, a package weighing 500 g from 535 rubles.

"Quelyd Special interlining". Produced in France. It has the highest price among all brands of glue for non-woven wallpaper (a package of 450 g costs from 360 rubles). However, the price is fully consistent with the quality - professional finishers consider it an ideal tool for gluing tapestries:

perfectly holds light and heavy wallpapers, with a smooth and voluminous pattern;
easy to breed;
does not smell;
does not flow down the wall during spreading;
does not leave marks when it gets on the front side, etc.

The PUFAS range of adhesives for wallpaper with non-woven base (5 types on sale) provides better adhesion between the tapestries and the wall surface. It has a color indication, which helps with spreading - no gaps are allowed. When buying glue of this brand, you can choose a product for specific wallpapers: smooth, corrugated, light, heavy.

How to calculate the number of packs of glue

An important feature of the glue for non-woven trellises is that the packaging indicates its consumption not for the number of wallpaper rolls, but for the wall area in m 2. Therefore, the calculation is made a little differently.

First, the area of \u200b\u200bthe walls to be pasted is determined. Then the result is divided by the consumption in m 2 indicated on the package. The result is rounded up.

How to breed

To dilute the glue you will need:

capacity for 10-12 liters (plastic bucket, basin or bowl);
warm (40-45 ° C) water (it will not dissolve in cold water, it will curl up in insoluble lumps in hot water);
an object with which you can stir the glue (stick, whisk, mixer, electric drill, etc.);
a tablespoon or measuring cup (an error of only 50 g of powdered mass leads to a complete marriage - the mixture is poured into the toilet).

The instruction is simple:

poured into a basin (bucket) warm water in the amount specified in the instructions - no more, no less;
the required amount of the powdered mixture is measured;
water is stirred until a funnel is formed with a stick or hand (power tools cannot form a funnel);
glue slowly pours into the center of swirling water;
in this way, the glue is stirred for another minute after the entire dry mixture has been in the water;
further stirring is desirable to carry out with a mixer or a drill with a nozzle - they will break all the small lumps, which is difficult to do manually;
after the end of stirring, the glue is allowed to brew and swell (14-16 minutes is enough), during which time it will take on a working consistency - it will look like jelly or thick sour cream.

Professional finishers recommend adding another 200 ml of water and mixing thoroughly (thick glue dries quickly). Water must be added within half an hour after the start of stirring. If you violate this requirement, you get water with floating jelly-like clots. Everything, on this the resulting glue is ready for use.

Pasting instructions

How to glue non-woven wallpaper with your own hands? Step-by-step algorithm of work:

In the room where the work will be carried out, one day before they begin, airing is done, after which the windows and doors are tightly closed;
The height of the wall for pasting is measured;
Wallpaper sheets are cut to size or with a tolerance of 8-10 cm;
Wallpaper glue is being prepared;
The place to start work is determined - this type of wallpaper allows you to start work from anywhere, but it is better from a corner, stepping back 4-5 mm;
A vertical line is applied to the wall for gluing the first sheet a few mm from the corner;
The surface of the wall is smeared with a roller or brush with a thick layer of glue slightly wider than the size of the tapestries;
The first sheet is glued with an edge strictly along the applied line;

With a roller or wallpaper spatula, the canvas is rolled against the wall. Movements go from top to bottom, from the center of the sheet to its edges. When glue appears on front side trellis, it is removed with a foam sponge;

The next sheet is glued end-to-end (beginners can overlap wallpaper without a pattern - the seam is then cut with a knife and an inconspicuous connection of two sheets is formed). If the wallpaper did not lay down the first time strictly vertically or the pattern did not match, the tapestries can be torn off the wall and glued again - the material will not tear or stretch;
Excess glue and air are removed from under the wallpaper with a rubber roller. Since the interlining stretches a little, it is necessary to ensure that during rolling the edge of the web does not go over the previous sheet. The joint is rolled with a special narrow roller. If the edge of the wallpaper still lags behind - the glue has dried, then the wallpaper is removed from the wall, and it is re-smeared with glue.

Problems arise in the corners, due to the large width of the trellis. How to glue non-woven wallpaper when passing corners? Here the techniques are the same as when working with narrow trellises:

However, there is one caveat here. cut off part wide wallpapers is not thrown away, but serves as the next sheet when pasting the corner, even if the width of the cut off part of the trellis is only 15-20 cm.

The issue of passing corners is considered in detail in the work "".

How long does non-woven trellis dry

Many apartment owners tend to ventilate the pasted premises immediately after the completion of work. However, this cannot be done - drafts will lead to peeling off the wallpaper at the joints and in the corners, the most problematic places.

How long can you ventilate the room after finishing work? To answer, you need to figure out how long non-woven wallpaper dries after gluing. Manufacturers of non-woven tapestries write that their complete drying occurs within 12 hours. Practice refutes this statement - the wallpaper dries for 24-28 hours.

Attention: do not confuse with the drying time of non-woven wallpaper. It can be up to 3 days.

Finally

As can be seen from the above material, there is no difference in how to glue meter-long non-woven wallpaper with your own hands and narrow trellises. There are deviations only because of the material from which the wallpaper is made.

Procedure steps

Wallpaper must be pasted on the prepared surface. Preparation includes putty (see How to putty walls under wallpaper yourself) and a good primer, which must be dry.

So:

If there are metal protrusions on the wall, then they should be applied Oil paint otherwise, over time, a rust stain will appear on the wallpaper. It is advisable to use the same primer on all walls so that the behavior of the adhesive does not change depending on the primer. In this case, the wallpaper will hold the same after gluing.
Wall work should only be carried out if the floor and ceiling have already been finished. It is better to protect the finished floor with some material like a film.
At the beginning of gluing, the walls must be primed with glue. For this, a special primer adhesive is used, which is made more liquid than that used for gluing. It is necessary to make such a primer if thick wallpapers are used, or if gluing is carried out in the heat.
It is worth paying attention to the fact that gluing is carried out in a closed space, which cannot be ventilated for another day after gluing.

Important: In natural light, it is much easier to notice irregularities in the form of various bubbles or folds than in artificial light.

First of all, you need to paste wallpaper on large walls, and lastly - in areas that are not conspicuous, for example, behind furniture. There you can apply the remaining trimmings from the wallpaper.
Wallpaper is glued with a level. They are given a vertical, along which lines a meter and a half long are drawn. Start gluing from the corner. The line is laid, stepping back a little from the corner: from the limiting protruding point with a width like that of a tube minus 0.5-1 cm. This is done in case of an uneven corner, since in most apartments the walls are not ideal: and in both directions at the same time. In apartments with round corners a vertical line is drawn in the middle of the corner. That's where the gluing starts.
The dilution of the glue begins with the fact that a pack of glue is gradually poured into a pre-prepared bucket of water for a minute, constantly mixing the composition. After a short period of time, the glue swells, after which it can be stirred again, after which you need to let it stand for a while.
It is not forbidden to make the glue more or less thick, depending on specific situation. For example, for dense, heavy wallpaper, it is better to use thick glue. Thick wallpaper absorbs glue better, and therefore it is easier to move them. This is one of the most important advantages: it should be easy and convenient for you to work with glue.
For its storage, it is recommended to use a special paint bath: this is the easiest way to place a roller in the glue to get rid of its excess. The work may take several days, but this is not scary, since good glue does not deteriorate soon. If the glue begins to harden, it is enough to mix it again; in case of occurrence bad smell it is better to prepare a new solution.
Cloths of non-woven wallpaper are not covered with glue. First you need to apply glue to the wall, in the area where the canvas will be located, and then the wallpaper itself is glued. It is better not to use a lot of glue.
When sticking, the wallpaper roll unfolds, after which the canvas rises up. It is necessary to leave a small area near the ceiling in case of irregularities on the ceiling and walls. The wallpaper is glued along the drawn lines, after which they are smoothed by hand. It is allowed to cut wallpaper before sticking. The length of the cut strips must be adequate to the height of the ceiling. If the canvas turned out to be too long, then it can be cut; if the length is a little short, it can be hidden with a plinth.
Where the wall meets the ceiling and floor, a larger spatula is fixed almost unidirectionally with it. On it with a sharp knife at the top and bottom, excess wallpaper is cut off. If in some places the canvas is not cut, the knife is carried out again, in no case changing the fixed position of the spatula. In the corners of the room, instead of a large spatula, you should use a small one.
If there are foamed polystyrene skirting boards in the room, cutting must be done very carefully to avoid damaging the skirting board. The same applies to cutting wallpaper for gluing in spaces with stretch ceilings.
After preliminary alignment of the panels, the wallpaper should be smoothed out with your hands, removing air bubbles and swelling from the glue from under them. A good glue is invisible on non-woven wallpaper, but it can show up on a painted ceiling (see How to paint wallpaper on a ceiling). Glue from the wallpaper is removed with a damp kitchen sponge. Getting rid of air bubbles is done with a wallpaper spatula. With even vertical movements from top to bottom, the center of the canvas is pressed, then from the middle the wallpaper is smoothed down and to the sides to smooth the edges. Particular attention should be paid to the joining of the panels and the corners of the room.
In the process of smoothing the wallpaper, the glue begins to dry in some places. In this case, it is necessary to lift the panel and re-apply the adhesive composition. Next, you need to lower the wallpaper, smooth it again and press it against the wall.
In the event of wrinkles in the process of smoothing the canvas, you need to raise part of the canvas to the crease to be removed, re-smooth and press against the wall.
Cloths must be connected strictly vertically. After gluing the first panel, glue is applied to the wall with a brush for the next strip. Then the wallpaper roll is placed against the wall, it is unwound and the upper edge of the wallpaper is moved towards the ceiling until the selected elements of the pattern coincide with each other. After joining the edges of the canvases and smoothing the wallpaper with your hands, trimming is performed from the upper and lower sides. After that, the wallpaper is smoothed with a spatula.

Attention: In the process of gluing wallpaper with a print, special attention is required.
After gluing the first strip, the wall is smeared with glue for another. Now substitute the roll, unwind it; lift the top edge of the panel to the ceiling, and then move it to the sides until part of the pattern falls into place. Connect the edges of the canvases, smooth them with your hands, trim from below or from above as necessary. It remains to re-smooth the wallpaper with a spatula.
If the piece on top turned out to be excessively long, an approximate trim is made in rough, and after smoothing, the final one.

Space for switches Trimming in places of unscrewed sockets and switches: we find by hand the voids under the pasted wallpaper and cut through the crosses there. We perform a fine trimming on dried wallpaper (wet ones are more difficult to cut). For this purpose, a small spatula is substituted for the edge of the mounting box, along which, as if along a ruler, everything superfluous is removed.
Pipe cutting Cutting around pipes is more difficult.
First of all, it is necessary to lean the canvas against the wall pre-coated with glue up to the pipe, if it is located under the ceiling; from there, under a small spatula, make a vertical cut. Its length should be adequate to the distance between the pipe and the ceiling.
If the incision is too short, lengthen it. A small longitudinal incision is then made at the bottom of the cut as the canvas is lifted to the ceiling for the last time.
When the alignment of the wallpaper near the pipe with a spatula is completed, an approximate undercut with an “asterisk” is performed.
Following the final smoothing to the web pipe, the final trimming is done.

Near the window It is permissible to stick wallpaper near the window in pieces or in a single strip. In the latter version, trimming will have to be done along the windowsill and slopes.
Sticking begins as usual: the wall is covered with glue, a roll of wallpaper is pressed against it, unwound and laid on the wall; its edge is connected to the edges of adjacent strips, the wallpaper is smoothed out manually.
Then along window opening trimming is carried out: a well-sharpened knife blade extends to the limit, sticks into the wallpaper and cuts them along the perimeter of the cavity without a spatula. A few unnecessary millimeters can stick out, and then it is possible to get rid of them the next day by grinding along the bevel line with sandpaper. This should be done only after the wallpaper has dried: it will not work on wet ones.

In the corner The first strip slightly overhangs the other side of the room, forming an overlap. The second one sticks in the same way.
Attention: If the overlap of two canvases turned out to be too small, you need to properly smooth and press the canvases to the wall, and if it is too large, perform additional trimming: otherwise the corner will look untidy.

It is carried out in this way: a spatula is installed in the corner, co-directionally with the wall with the upper canvas. After that, an incision is made in two layers at once. The cut off part is taken from the upper web, it is bent, and trimmings are taken from the lower web.
The last step: applying the adhesive mass with a brush in the corner itself and gluing the canvases. For corners, do not spare glue, since the corners of the room freeze easily, as a result of which the wallpaper may begin to fall off. It is advisable to pull them a little, stepping 1-2 mm around the corner.

If you need a narrow strip of wallpaper for gluing in the corner, you can get it this way: the wallpaper of the required length is rolled up into a tube, placed on a hard surface, the desired width is measured, after which the roll is cut with a knife.

If the wallpaper is still swollen after drying, this can be somewhat corrected. To do this, purchase a syringe with a needle and place glue inside. You will need a thinner adhesive so that it can go through the needle. Where a bubble has formed and the canvases do not stick to the wall, pierce a hole, release the air, inject liquid into the hole and press the canvas.
How to glue non-woven wallpaper you now know. Their price is not as high as a wonderful effect with a quality finish. The most important thing is not to rush and do everything carefully.

How to glue non-woven wallpaper: a step-by-step description of the process with photos and videos. How to properly glue wide meter or standard non-woven wallpaper on the wall: what glue to glue, work technique How to glue non-woven wallpaper with each other

Preparatory work before wallpapering

Basic work on gluing non-woven wallpaper

Preparatory work

Choosing glue

How to glue meter non-woven wallpaper

How to glue wallpaper in hard-to-reach places

Types of non-woven wallpaper

The basics of how to glue non-woven wallpaper

How to glue non-woven wallpaper: preparatory stage

Wallpaper selection

Purchase of glue and tools.

Wall cleaning

Wall alignment

How to glue non-woven wallpaper: the gluing stage

How to glue non-woven wallpaper: the final stage

How to glue non-woven wallpaper

Advantages and disadvantages

Surface preparation

Tools and materials

Wallpaper preparation

Quantity calculation

Glue preparation

Which glue to choose

How to calculate the number of packs of glue

How to breed

Pasting instructions

How long does non-woven trellis dry

Finally

Related videos

Preparation for pasting with non-woven wallpaper

Preparing walls with markings

Wallpaper preparation

Adhesive preparation

Procedure steps

Space for switches	Trimming in places of unscrewed sockets and switches: we find by hand the voids under the pasted wallpaper and cut through the crosses there. We perform a fine trimming on dried wallpaper (wet ones are more difficult to cut). For this purpose, a small spatula is substituted for the edge of the mounting box, along which, as if along a ruler, everything superfluous is removed.
Pipe cutting	Cutting around pipes is more difficult. First of all, it is necessary to lean the canvas against the wall pre-coated with glue up to the pipe, if it is located under the ceiling; from there, under a small spatula, make a vertical cut. Its length should be adequate to the distance between the pipe and the ceiling. If the incision is too short, lengthen it. A small longitudinal incision is then made at the bottom of the cut as the canvas is lifted to the ceiling for the last time. When the alignment of the wallpaper near the pipe with a spatula is completed, an approximate undercut with an “asterisk” is performed. Following the final smoothing to the web pipe, the final trimming is done.
Near the window	It is permissible to stick wallpaper near the window in pieces or in a single strip. In the latter version, trimming will have to be done along the windowsill and slopes. Sticking begins as usual: the wall is covered with glue, a roll of wallpaper is pressed against it, unwound and laid on the wall; its edge is connected to the edges of adjacent strips, the wallpaper is smoothed out manually. Then along window opening trimming is carried out: a well-sharpened knife blade extends to the limit, sticks into the wallpaper and cuts them along the perimeter of the cavity without a spatula. A few unnecessary millimeters can stick out, and then it is possible to get rid of them the next day by grinding along the bevel line with sandpaper. This should be done only after the wallpaper has dried: it will not work on wet ones.
In the corner	The first strip slightly overhangs the other side of the room, forming an overlap. The second one sticks in the same way. Attention: If the overlap of two canvases turned out to be too small, you need to properly smooth and press the canvases to the wall, and if it is too large, perform additional trimming: otherwise the corner will look untidy. It is carried out in this way: a spatula is installed in the corner, co-directionally with the wall with the upper canvas. After that, an incision is made in two layers at once. The cut off part is taken from the upper web, it is bent, and trimmings are taken from the lower web. The last step: applying the adhesive mass with a brush in the corner itself and gluing the canvases. For corners, do not spare glue, since the corners of the room freeze easily, as a result of which the wallpaper may begin to fall off. It is advisable to pull them a little, stepping 1-2 mm around the corner. If you need a narrow strip of wallpaper for gluing in the corner, you can get it this way: the wallpaper of the required length is rolled up into a tube, placed on a hard surface, the desired width is measured, after which the roll is cut with a knife.