Private house 

Gas floor cast-iron coppers of a baxi. Floor standing gas boilers Baxi with a cast-iron heat exchanger. - basic information

Under the Italian brand Baxi, advanced heating equipment, which is in demand in many countries of the world, including Russia. It is represented not only by compact wall-mounted, but also floor-standing boilers in three model lines: Baxi SLIM, Baxi SLIM EF and SLIM HPS. floor standing Boilers Baxi have a multiple margin of reliability and durability, are used for heating residential, commercial, industrial and public premises. They are famous for their long service life and the absence of problems during operation.

  • Baxi SLIM - floor volatile gas boilers heating with cast iron heat exchanger (14.9 - 62.2 kW)
  • Baxi SLIM EF - floor-standing non-volatile gas heating boilers with a cast-iron heat exchanger (22 - 60.7 kW)
  • Baxi SLIM HPS - floor-standing volatile gas heating boilers with a cast-iron heat exchanger of medium power (78.7 - 107.9 kW)

Baksi floor-standing gas boilers, as mentioned above, are equipped with durable cast-iron heat exchangers. They are resistant to corrosion, withstand temperature overloads, and have a long service life. Thanks to them, boilers can work for decades without additional maintenance. Atmospheric burners are responsible for generating heat.

The Baxi SLIM boiler series is represented by a very wide model range- these are boilers with both open and closed camera combustion, both single-circuit and double-circuit (with a pre-installed boiler).

A little about the meanings in the name of the heating boiler of the SLIM series:

  • 1 - single-circuit boiler
  • 2 - double-circuit boiler
  • F - closed combustion chamber, respectively, without F - open
  • i - electronic ignition, it is in all boilers
  • N - no hydraulic accessories (expansion tank, safety groups)
  • 150 .... 300, 400, 490, 620 - maximum power, respectively, 15 .... 30, 40, 49 and 62 kW

Thus:

  • Baxi SLIM 2.300 Fi - a double-circuit boiler (with a boiler), 30 kW, with a closed combustion chamber and electronic ignition of the burner
  • Baxi SLIM 1.490 iN is a single-circuit boiler with a power of 49 kW, with an open combustion chamber and without hydraulic accessories

Advantages of Baxi floor standing gas boilers:

  • Compact design;
  • Fast heating of the coolant;
  • Minimum heat loss due to thermal insulation of buildings;
  • Automatic maintenance of temperature;
  • Large power range;
  • Ability to work on liquefied gas;
  • Stable operation at reduced gas pressure.

Baxi boilers have received thousands of positive reviews from users and specialists in thermal equipment.

Baxi floor-standing boilers are represented by three model ranges, including single-circuit and double-circuit models. The SLIM range is distinguished by its compactness and neat design; in some models, circulation pumps with air vents are installed. Double-circuit models have built-in boilers. In the SLIM line, heat exchangers with a large heat exchange area are installed, boilers have thin bodies. As for the non-volatile line of SLIM EF boilers, it is distinguished by the ability to work in buildings without electrification. Ignition in them is carried out from an ignition burner. The equipment independently maintains the desired temperature in the heating circuit.

Gas floor standing boilers Baxi are represented by models of various capacities, from 15 to 107.9 kW. The heated area can exceed 1000 sq. m. The equipment is fully adapted to Russian operating conditions, has high efficiency and provides fuel economy. If necessary, it can be reconfigured to work with liquefied gas. Some models are endowed with weather-dependent automation and two-stage burners.

Need a floor standing gas boiler from the Italian brand Baxi? You can buy it in the Teplodvor online store. All available model lines are on sale. Customers are offered delivery services in Moscow and throughout Russia. The equipment is accompanied official guarantee manufacturer.

The manufacturer of Baxi boilers, the Italian company BDR Thermea, is one of the world's leading concerns producing heating equipment. The company has production facilities throughout Europe and distributes its products in 70 countries.

Heating equipment Baxi

In Russia, of all the equipment manufactured by this company, the Baksi double-circuit boilers are the most popular. Such equipment allows you to provide housing not only with heat, but also hot water.

Most of these boilers run on gas, although there are also diesel boilers Baxi and solid fuel equipment.

The company does not produce electric boilers. To date, only electric water heaters are available in its catalog.

Boiler features

The positive qualities of the company's products include:

  • ease of installation. The design of Baksi boilers is made in such a way that even a non-professional can install them in the right place. However, to guarantee correct operation, of course, it’s better to turn to specialists who can not only install heating equipment, but also set it up. If you buy a Baxi wall-mounted gas boiler in our company, you can count on installation assistance, which will be quickly and efficiently provided by our specialists;
  • increased strength of boilers. Thanks to this, they can safely serve for more than a dozen years. In case something happens to the equipment, our company offers you warranty and post-warranty service for all boilers purchased from us;
  • ease of operation. To use the Baxi boilers, the attached instructions are enough, all the controls are intuitively simple and convenient, and the equipment itself has reliability and real European quality.

Baxi Slim boilers have a wide range of models, boiler power from 15 to 62 kW. Smooth power control and built-in self-diagnosis system provide increased comfort in operation and ease of maintenance. Modern design boiler Baxi Slim and compact dimensions (only 35 cm wide) make it easy to place the boiler in any interior. You can choose a model with a built-in boiler or install a separate boiler with the same design next to the boiler (Baxi Slim UB).

Gas system of the BAXI Slim boiler

  • Smooth regulation of boiler power in heating and hot water supply modes;
  • Smooth electronic ignition;
  • Boilers are fully adapted to Russian conditions. They work steadily when the inlet pressure of natural gas is reduced to 5 mbar;
  • It is possible to reconfigure the boiler for liquefied gas.

Hydraulic system of the BAXI Slim boiler

  • The primary heat exchanger is made of cast iron;
  • built-in circulation pump(except IN models);
  • Built-in storage boiler for cooking hot water(in double-circuit models) with its own pump;
  • Heating circuit manometer;

Temperature control of the BAXI Slim boiler

  • Two ranges of temperature control in the heating system: 30-85°C and 30-45°C ("warm floors" mode);
  • Built-in weather-dependent automation (possibility of regulation by outdoor temperature sensor);
  • Regulation and automatic maintenance of the set temperature in the heating and hot water circuits;
  • Digital indication of temperature;
  • Possibility to connect a programmable timer.

BAXI Slim boiler control and safety devices

  • Digital self-diagnosis system;
  • Ionization flame control;
  • Pump blocking protection system (turns on automatically every 24 hours);
  • Protective thermostat against water overheating in the primary heat exchanger;
  • Thrust sensor to control the safe removal of combustion products (pneumatic relay - for models with a closed combustion chamber, thermostat - for models with an open chamber);
  • Pressure switch in the heating system - works when there is a lack of water pressure;
  • Safety relief valve in the heating circuit (3 atm) and in the hot water circuit (8 atm);
  • Frost protection system in heating and hot water circuits.

Designations in the model name:

fi- a boiler with a closed combustion chamber: combustion air can be taken from the "street", the chimney is coaxial (pipe in a pipe) or separate, the presence of draft in the chimney is optional.

i- boiler with an open combustion chamber: combustion air is taken from the room where the boiler is installed, the chimney is traditional, providing natural draft.

N- models without built-in pump, expansion tank, pressure gauge and safety valve.

Models BAXI Slim 2.300 and BAXI Slim 2.230 have a built-in boiler for hot water.

Series Slim FM boilers from Baxi Corporation (website - baxi. en) includes several cast iron floor boilers on gas fuel with different power- from 22 to 60.7 kW. They are completely non-volatile. Their design and energy efficiency fully comply with modern European standards. They have a light gray (traditional for Baxi products) case, a black control panel with an LCD display.

The main feature of this equipment is a well-thought-out automatic control system for the operation of the boiler. There is a thermocouple, which, in the event of a cessation of combustion, closes the gas fuel supply valve. As a result, the device does not require electricity. This is optimal solution if natural circulation is selected.

In this range manufacturer there are several non-volatile boilers. The most popular of these are those that can be used for heating private houses.

- basic information

This convection heating the boiler is able to operate with a maximum power of 22 kW. It is sufficient for space heating, with total area 200-250 m2. It is non-volatile. Able to be built into the heating circuit. To organize hot water supply, you must additionally purchase a boiler indirect heating. Its efficiency is 88%. Designed for floor installation.

This model has a mechanical control using the display located on the front panel. Operating parameters can be monitored using a thermometer and pressure gauge. Optional connection available remote control. It is possible to use in systems with both gravity and forced circulation of the coolant (with a circulation pump).

boiler baxi slim ef 1.22 - specifications

Essential Workers characteristics of this equipment are as follows:

  1. Burner gas atmospheric ignition, made of stainless steel;
  2. The combustion chamber is open;
  3. Heat exchanger material – cast iron;
  4. The maximum consumption of natural gas is 2.64 kWh, liquefied gas- 1.64 kg per hour;
  5. The maximum achievable coolant temperature is 95 degrees C;
  6. Pressure in the heating circuit - 4 atm;
  7. dimensions- 40x85x59.5 cm.

The boiler safety system includes gas control, protection against overheating and freezing, as well as safety valve. There is an option to connect a room thermostat.

– basic information and characteristics

This model has a power of 30.5 kW and is designed for heating residential premises with a total area of ​​270-350 m2, it is non-volatile. It can work on natural main gas or (after reconfiguring the burner) on a propane-butane mixture.

The efficiency is 87.6%, the boiler is able to heat the coolant to a temperature of 95 degrees C. Like other Slim EF models, this product has a stainless steel pilot burner. The combustion chamber is open. The operation of the equipment is controlled using a panel with an LCD display located in the upper part of the case. Remote control connection possible.

If you decide buy boiler Slim EF, please contact our shop. price for this or that model, you can check with our manager. In agreement with the customer, delivery is made to the specified address.

Thanks to direct cooperation with the manufacturer, we are able to supply additional equipment and spare parts. We guarantee high quality products!

Represents floor-standing cast-iron gas boilers of increased power of the Slim HP series. These boilers are a continuation of the popular in Russia series of floor standing boilers Slim and have three models with a capacity of 83, 99 and 116 kW. Last year, more than 10,000 Slim floor standing boilers were sold and installed in Russia. Thus, we can safely say that Slim boilers are one of the most popular and best-selling foreign-made gas cast-iron floor boilers in Russia.

At the same time, the number of sales of Slim boilers in Russia is growing from year to year. The maximum power of Slim boilers is 62 kW. Fulfilling the numerous wishes of its partners, BAXI offers high-power models of the Slim HP series. The prefix "HP" in this case is translated as "high power" (High Power). The Slim HP series is a series of highly efficient gas fired boilers with atmospheric burner.

All models of this series are made in a gray case with a black control panel, like the classic Slim boilers. The fundamental difference between BAXI Slim HP boilers is the design of the cast-iron heat exchanger. In classic Slim boilers, the heat exchanger sections are drawn in depth with increasing power. This concept limits the maximum output of Slim boilers to 62 kW (due to the requirement for an even gas distribution along the cylindrical burner).

Therefore, for the series of Slim HP boilers, a cast-iron heat exchanger developed by the French design bureau of the BAXI Group holding was used. Sections of Slim HP heat exchangers are typed in width. Its patented, unique design consists of sections assembled with steel hydraulic manifolds. This arrangement of the heat exchanger provides a number of undeniable advantages compared to the classical nipple assembly, for example: low hydraulic resistance of the heat exchanger cavity and compact size of the heat exchanger.

In this case, only one is used for assembly. wrench. Sectional heat exchanger made of highly ductile eutectic iron with shaped fins has a large heat exchange surface and excellent aerodynamic properties. Slim HP series boilers have all necessary means control and safety devices. The draft sensor built into the draft stabilizer will stop the boiler in case of problems with the chimney.

The work of the two-stage gas burner controls the flame ionization electrode and in case of flame extinction, the gas valve will instantly close. An overheating thermostat installed in the front section of the heat exchanger will stop the boiler in case of overheating of the boiler. Thanks to the increased layer of fiberglass thermal insulation placed under the casing and the well-thought-out design of the boiler, the maximum efficiency for atmospheric boilers is 92%.

Slim HP series boilers are equipped with a two-stage gas valve. The first stage is 60% of the rated output of the boiler. Slim HP series boilers work steadily at reduced gas pressure, maintaining safe ignition and stable combustion at an inlet gas pressure of 7 mbar, which is certainly an advantage in Russian conditions. With the help of an auxiliary pilot burner, it is possible to achieve particularly smooth ignition.

Slim HP series boilers are equipped with a simple and reliable control panel with the ability to connect a room mechanical or programmable BAXI thermostat. Optionally, you can install an additional control panel with the possibility of weather-compensated regulation, boiler control and programming of the operating modes of the DHW and heating circuits. Such Albatros2 automation from Siemens turns the Slim HP boiler into a progressive automatic system to maintain the microclimate in the building.

To create high-capacity boilers, Slim HP series boilers can be installed in a cascade using a special accessory - a wall-mounted cascade regulator. The main advantages of the cascade control unit are the uniform loading of the boilers, the stepwise increase in thermal power and the uniformity of the resource development of each boiler.

Based on the foregoing, it can be confidently stated that cast iron boilers Slim HP series from BAXI are a worthy addition to the Slim line, a reliable and flexible solution, as when creating individual system heating, and in the case of operation in a cascade to provide heat and hot water to large rooms.