accessories 

Instructions for a double-circuit boiler Ariston. Gas boiler: how to turn on, instruction manual. Its undeniable advantage is

The Italian company Ariston has been producing and selling high-quality equipment in the markets not only in Russia, but also in many European countries for twenty years. All equipment meets European standards and has a high level of wear resistance and strength. All Ariston products simultaneously combine environmental friendliness, reliability and a high level of quality. What characteristics distinguish the Proterm bear gas boiler, read.

Technical characteristics of the gas boiler Ariston

Whole the lineup heating gas boilers Ariston has almost the same functions, regardless of price. All menus are provided in Russian.

Warranty for heating equipment standard type is valid for two years, and for condensing boilers it is three years. Any Ariston thermal equipment is incredibly easy to maintain, install and operate.

The following functions are responsible for security:

  • Blocker of circulation pumps;
  • Feed system semi-automatic;
  • Scale protection;
  • Automatic evacuation of air from the heating circuit of the device.

The sizes of Ariston gas boilers are different, but the average is 700/450/600.

You can also control the heating gas boiler using a remote controller. If something goes wrong, the system will analyze and immediately report a breakdown.

Types of gas boilers Ariston

The heating equipment market is literally replete with products of the Italian company Ariston. Many buyers prefer the evo and comfort models, as well as the following types of gas heating boilers:

  • boiler Ariston Egis plus 24 ff, it is resistant to voltage drops and works normally at low gas pressure;
  • gas boiler Ariston 24 cf, it is designed to maximize resource savings with the maximum effect of its work;
  • a gas boiler Ariston genus evo 35 ff, has a triple water purification filter and adapts perfectly to variable supply rates, to low water consumption;

Double-circuit heating gas boilers Ariston are attached as on wall panel and installed directly on the floor. The presence of two circuits indicates that the gas boiler can simultaneously produce space heating and supply hot water. Boilers of the series fall into this category:

  1. class,
  2. egis,
  3. Genus.

The most "strong" in terms of functionality are heating boilers Genus.

This group is equipped with primary and secondary heat exchangers. They have high performance. All boilers have an LCD display. Read more and how much they cost.

How to install and start a gas boiler Ariston?

If the boiler is installed on your own, then it is necessary to carry out the installation in the following sequence:

  1. It is necessary to install a coaxial corner on the heating boiler, to make technical measurements of the distances from the center of the corner to the edge of the gas boiler. According to the standard, this distance should be 105 mm.
  2. Lay the base of the corner with cushioning material and fix the clamp on it.
  3. Before direct installation of the chimney, it is necessary to make a hole for it in the wall and only then screw the mounting plate.
  4. It is more convenient to bring a branch together.
  5. Next, it will be necessary to solder the polypropylene pipes.
  6. Connect polypropylene with metal-plastic pipes.
  7. Install control valves.

Only after performing these manipulations can the gas boiler be started.

Launching is pretty simple:

  • After the gas is supplied, it will be necessary to pump in the liquid.
  • Check the level of working pressure (0.8-0.9 atm).
  • Then the "winter" mode is set, provided that the heating boiler belongs to the category of double-circuit ones.
  • We connect to the network.

    If the boiler does not turn on, then it is necessary to turn the plug in the socket (many Ariston boilers are phase dependent).

Operating instructions for the gas boiler Ariston

Malfunctions of the gas boiler Ariston

Most popular codes errors of heating gas boilers Ariston:

  • boiler Ariston error 5p3 - "Flame separation" often occurs in the absence of grounding;
  • boiler Ariston error 501 - “lack of constant pressure” should only be decided by a specialist, since the pressure is regulated using a pressure gauge.

Repair of gas boilers Ariston

The manufacturer does not recommend Ariston to independently repair or adjust gas heating equipment, because any intervention in the heater system will lead to a loss of warranty. Therefore, if a significant breakdown is found, then it will have to be fixed for your hard-earned money.

Spare parts for gas boilers Ariston

Components for Ariston heating equipment can be purchased from dealers or contact service centres in the region and ask them for more detailed information about spare parts. For example, room thermostat for a gas boiler Ariston can be purchased at almost any specialized store.

The price of a gas boiler Ariston

Systems are experiencing a rebirth today autonomous heating. This is due to the fact that not so long ago a boom in individual construction began in the country. Vacation home it is quite difficult to connect to the central communications. If this is done, then coziness and comfort in such a dwelling will depend on a number of unreliable factors, including the condition of the pipes, the operation of the boiler room, etc. This includes centralized power transmission.

If you also decide to follow the experience of the majority and choose a gas boiler for heating a suburban building, then it is certainly recommended that you familiarize yourself with the operating recommendations, from which, among other things, you can learn how a gas boiler works, how to turn on this equipment, and also how to avoid its premature breakdowns. For example, in order to prevent foreign bodies from entering the system, a hard filter should be installed at the inlets running water, gas, as well as the heating circuit. It is also important to take care that the system has a voltage regulator, which is located at the input to this. This will protect the control board from power surges.

If you are wondering how to turn on the Baxi floor-standing gas boiler, you must follow a certain technology. In the first step, you must open the gas cock, usually located under the equipment itself. It is important to make sure that the system has the right pressure, only then can power be supplied to the device. Then you should press the "Start" button and set the device to the "Winter" or "Summer" mode.

The panel has special buttons with which you can set the desired temperature values ​​in the boiler and hot water circuits. This will turn on the main burner. If you purchased a gas boiler, how to turn it on, you need to ask before unpacking the goods. After you have carried out all the above actions, you need to make sure that the boiler is working, this will be indicated by a special symbol of a burning flame on the display.

Connection nuances

After you have figured out how to turn on the heating gas boiler, you can set it to the "Summer" mode, while the device will work, producing only hot domestic water. When starting is done, plugs may form inside the fuel supply pipe. In this case, the burner will not turn on, and the boiler will be blocked. In this situation, it is necessary to repeat the steps mentioned above again. Ultimately, you must ensure that the gas begins to flow into the burner. Then the "R" button is pressed and held for about 2 seconds.

It is impossible to name at least one property owner who would not dream of cozy home. In order to keep the rooms warm, today there is no need to install stoves that consume a huge amount of firewood and coal. Such equipment remains in the past. He is being replaced heating appliances which are available to almost all segments of the population.

Solution of the problem

These technical innovations are characterized by their compact dimensions and high efficiency. The advantages are complemented by the absence of the need for the constant presence of a person and ease of operation. Almost all processes of such devices can be automated. Therefore, when designing a dwelling and reconstructing an operated house, experts recommend paying special attention to the heating system.

It is most often based on heating boilers, from the correct choice and competent installation of which the heating efficiency will depend. Among other things, it is important to study the issues of minimizing heat loss and efficiency. Among others, Ariston boilers are on the market today, reviews of which you can read below.

Overview of the most popular models: EGIS PLUS 24 CF

This equipment costs consumers 48,300 rubles. This boiler is a unit that is equipped with an open combustion chamber. "Ariston 24" is a design that has a stainless steel burner, protected from frequent inclusions. This device belongs to the enclosure protection class X4D.

On the outer panel there is a display that allows you to simplify the control and change the operating parameters. This Ariston boiler, reviews of which are only the most positive, has the option of freezing protection and blocking the circulation pump. You can not be afraid that scale forms inside. The Ariston double-circuit boiler can be used to equip a heating system and supply hot water.

Reviews about the model

According to buyers, the boiler has many advantages, among them are:

  • simple control;
  • profitability;
  • simple installation;
  • adaptation to the conditions of Russia;
  • built-in condensate collector.

"Ariston 24" is economical, which attracts consumers. It has low fuel consumption. Installing it is pretty easy. This is facilitated by the compact dimensions of the case. You can place the equipment on the wall in a limited space. According to buyers, the unit can operate at reduced gas pressure. The operation of the device is possible even at low external temperatures down to -52 °C. Customers like that the boiler has a self-diagnostic function. The structure is equipped with a stainless steel heat exchanger.

Overview of the Genus Premium 45 HP boiler

If you are interested in Ariston boilers, it is recommended to read reviews about them. You can buy equipment for 144,200 rubles. This wall model is used for heating houses and premises. Equipment supplied closed camera combustion. The spiral heat exchanger is made of stainless steel.

On the external panel of the wall-mounted boiler "Ariston" there is a display that simplifies the management and control of work. Efficiency is improved through the use of condensing technology. Energy costs are reduced, especially when compared with traditional boilers.

Reviews about the model

Quite often, recently, consumers have been interested in Ariston boilers, you can read reviews about them in the article, perhaps they will allow you to do right choice. As for the above model of equipment, it, according to buyers, has outstanding features, among which are:

  • simple control;
  • security;
  • ease of use;
  • comfort;
  • silent operation.

During operation, a minimum amount is emitted into the atmosphere harmful impurities. This indicates safety. Many consumers, in their words, when buying such equipment pay attention to ease of use. In this case, the operating time and heating temperature in heating mode can be set according to the needs of the user.

The unit is silent. It saves fuel by up to 35%. With reduced gas pressure, the equipment will be able to maintain stable operation. The case has a compact size, so you can install the boiler even in small rooms. Consumers also like the fact that they have the opportunity to additionally connect a storage boiler for hot water.

Model instruction manual

You can also choose the Ariston boiler as heating equipment, the instruction manual is supplied with the kit and must be studied by you before using the equipment. In it, the manufacturer discloses security issues. For example, it is important to exclude the leakage of liquid gas, as this may pose a danger to human life. If this still happens, then the heating system must be turned off. The room should be checked by closing all doors that lead to living rooms. The use of electrical switches is prohibited.

If you smell gas, the gas leak can cause an explosion. Under these conditions, smoking is prohibited. It is important to exclude the possibility of sparks and open flames. You need to immediately open the windows and shut off the gas supply. The heating system must be turned off. No people should be allowed into the danger zone.

The Ariston boiler, the operating instructions of which you must read if you have purchased such equipment, is installed taking into account the manufacturer's recommendations. After reviewing them, you can find out that the device is mounted on a vertical flat surface. For ease of maintenance, minimum clearances should be ensured. Special ventilation in the room where the device is installed is not required.

When connecting gas, make sure that the connections are tight. Wiring must be connected in such a way as to facilitate the electrical isolation of the equipment. Before supplying water, flush the system without disconnecting the device. In order to remove contaminants and prevent damage to the heat exchanger, it is worth making sure that there are no contaminants, as they can cause build-up and corrosion.

Possible malfunctions

By the error code of the boilers "Ariston" you can find out about the malfunctions. Overheating will be indicated by "1 01" on the display. The sensor will work if the temperature is 102 °C. As soon as cooling occurs, the error will be reset. An insufficient coolant flow can lead to a similar problem, as a result of which the filter of the heating circuit becomes clogged.

Sometimes there are problems with circulation pump. An excessively large flame on the burner can lead to such an error. Sometimes a method that requires shutting off the gas valve helps. After reviewing the errors of the Ariston boilers, you can understand what went wrong in the process of work. For example, the code "1 02" indicates that the pressure sensor in the circuit is faulty. Low pressure can lead to such an error. Reset it will not work, you will need to eliminate the cause.

Insufficient circulation is indicated by codes from "1 03" to "1 07". Sometimes this leads to insufficient volume of coolant. In order to troubleshoot the Ariston boiler, you need to remove the air by pressing the ESC button for a few seconds. The pump will run without ignition of the flame. Next, check the pressure, if necessary, add.

If there are problems with the circulation pump, then the control relay may be the cause. When equipment encounters slagging in the heat exchanger, good circulation can be prevented. This is sometimes also caused by the clogging of the filter, which is installed in the heating circuit.

Conclusion

The Ariston double-circuit boiler, one of which was discussed above, will allow not only to arrange a heating system, but also to use hot water. Modern equipment is equipped with many features that will make living in the house comfortable. You can also choose boilers from the manufacturer "Ariston". They are presented for sale in a wide range.

Nowadays, everyone is trying to make their life more comfortable. And the first thing to start with is the installation of a double-circuit gas wall-mounted boiler Ariston. This is a very practical equipment, as it can be heated like your own. private house, or an apartment, and huge rooms up to 500 m².

These boilers can not only heat the room in the cold season, but also heat water for domestic use. This is very convenient, since you do not have to additionally connect the boiler, for which you need to choose a separate place. Ariston wall-mounted boilers are extremely easy to use and easy to install. Therefore, both a professional and a beginner in this business can cope with such work - you just need to first read the instructions for the Ariston boiler.

Rice. one

It is also very good that Ariston manufactures gas boilers for almost any operation features. Indeed, in our country, natural gas pressure drops are not new, but rather a common thing. There can also be sudden changes in temperature - and the Ariston wall-mounted heating boiler withstands all this.

Features of Ariston gas boilers

What is the most important part in a double-circuit gas boiler? Yes, this is his burner, which burns fuel (in our case, gas), and also gives it to the system thermal energy which heats the room.

The burner happens:

  • Normal.
  • Modulation.

The second option is more common and convenient, because thanks to it, the Ariston gas wall-mounted boiler system is automatically adjusted. That is, the power of the heating equipment depends on its temperature. There is also such a mandatory system as the removal of combustion products.

Therefore, the boiler burner happens:

  • Closed.
  • Open.

Ariston gas boilers with a closed burner are safer heating equipment, since combustion products will never enter the room. They also do not require a chimney. It is enough just to connect a coaxial pipe to the boiler, which can be easily brought out. Ariston double-circuit gas boilers with an open burner require a chimney, as it is imperative to remove combustion products. And for this you need natural traction. Air will also be taken from the room, so it must be constantly ventilated.

A coaxial pipe (for a closed combustion chamber) is good because it is made from the so-called two layers. Such a design coaxial chimney the good thing is that the combustion products leave through the pipe, but at the same time, fresh air enters the burner of the Ariston boiler. And this means that oxygen will not be taken from the room.


Rice. 2

What else is good double-circuit boilers Ariston? And the fact that they are not one heat exchanger, as in single-circuit ones, but two. One for space heating and the other for hot water. Ariston manufactures various options boilers. They can contain separate heat exchangers, duothermic, and also have a built-in water heater tank.

What other features are there in Ariston gas boilers:

  • They have a water pump in order to circulate water through the pipes. The presence of an expansion tank is also available in many models. Thanks to him, the pressure in the heating system is normalized without outside help.
  • This heating equipment can have various types of ignition. Ignition can be either fully automatic, which makes it much easier to work with the boiler, and piezo ignition. In the second option, for the heating system to work, you need to press the button to start the unit.
  • Any model of Ariston automation and protection system.

Advantages of Ariston boilers

On the market for this technique there is a wide variety of different units for heating. Therefore, each person will be able to choose the model that suits his wallet. But why the Ariston company? But because people, coming home, want to be alone with themselves and enjoy the silence. And the gas units of this company are able to satisfy this desire.

Compatriots more and more began to trust these products. And not in vain. After all, the Ariston double-circuit gas unit works with virtually no sound. Thanks to him, bills for public utilities minimum will come, since this boiler is a sufficient economical unit. Fuel is used in minimal quantities.

You will receive a system that supplies you with hot water around the clock and also heats your apartment or house for a minimal fee. Also, the units of the Italian brand last longer than it is written on the warranty. By purchasing such a device, you will forget about the exchange of the boiler for many decades. It is also very good that the Ariston units are compact in size, so there is a place for it in absolutely any size apartment or private house.

How to choose gas equipment for heating

The Ariston product catalog contains many models, looking at which, it is difficult to make the right choice. Many people, coming to the store of this equipment, make mistakes, since they do not have all the necessary information before buying a wall-mounted unit. Therefore, recommendations will be written below regarding the choice of a boiler of this company.

Rice. 3

Each model has many technical features, and, of course, because of this, choosing the right heating device is becoming increasingly difficult. At first glance, it may seem that gas units are similar to each other, but only a professional can understand the intricacies. So you can contact a specialist by choosing the Ariston boiler, or you can read the information and try to make the right choice yourself.

So, what you need to consider before choosing high-quality equipment:

  • Of course, everyone knows the size of their kitchen, or the place where the heating unit will be installed. Therefore, the first thing to do is to consider what sizes of boilers are, choose the most optimal ones, and only then proceed to the technical features.
  • Next, you need to take into account which water heater is in the gas appliance, because most models with a low price have instantaneous water heater. And this means that if you have a large family, then such a double-circuit boiler is not suitable for home use.
  • It is better to choose a hot water storage tank - how many liters it will be, it's up to you. The accumulator heats up a large volume of water, which is then used for a sufficiently long time.
  • There are two types of combustion chambers in Ariston gas units. These are the closed combustion chamber and the open combustion chamber. Of course, it is better to choose a boiler with a closed combustion chamber. Such a unit for heating does not use room oxygen, so it is safer for health. Plus, you can still not install a chimney. It is enough to purchase a coaxial pipe and bring it through the wall. But since such a boiler is more expensive, not everyone can afford to buy it. Although if you think about health, it’s better to save money and buy a really high-quality product.

In just a few decades, Ariston has come a long way with the high quality of its products. You can constantly look at new models and be amazed at how fast technology is evolving. Choosing a boiler is really difficult, but the right information will help you with this.

Types of boilers for heating Ariston

All heating units of this company have three series. They differ from each other in some technical features.

So, what are the series of a famous brand:

  • Genus are the most advanced models. They have more functions than models in other series. The set of Genus devices includes: primary and secondary heat exchangers, as well as a fan that smoothly regulates speed. All wall boilers Genus have LCD screen enough large sizes. On it you can see all the data on which the gas unit works.
  • Clas- powerful and large (volumetric) units for heating. They have a built-in regulator that supplies gas. Thanks to him, you can regulate the gas flow. This is very convenient especially for those who are often away from home.
  • Egis. All models for heating from this series have small (compact) dimensions and a very attractive appearance. Their design will decorate any interior. They also have a high level of efficiency, which reduces utility costs. The intelligent control system also has gas appliances Ariston Egis series.

Rice. 4

Technical characteristics of gas boilers Ariston

All boilers of this brand have a capacity of 15 to 30 kW. You can choose exactly the power that is suitable for the size of your house or apartment.

So, technical features wall units for heating:

  • it is very good that the menu of wall-mounted boilers for Russian citizens is also in Russian. Therefore, it is easy to set the temperature that should be;
  • in places where power surges often occur, these Ariston heating devices are best suited. They withstand them without problems;
  • also gas units do an excellent job with reduced gas and water in systems.
  • gas double-circuit units are easy to operate. They are also easy to install, so even a beginner can handle it.
  • they have a high level of efficiency and are quite economical.

Of course, there is a possibility that the boiler will not be able to heat at the same time heating system and water, but this is not a big problem. Since, if necessary, a boiler can be installed in parallel to heat water.

Rice. 5

Some models of gas wall mounted equipment may even have sensors that detect indoor and outdoor air temperatures, so they work even more efficiently. The built-in display will show all the parameters by which the unit operates, so you can correct everything in time.

For what reasons does the Ariston gas boiler fail?

There are options when all connection and operation parameters have been met, but is the heating boiler still faulty? Like all equipment, gas units can also fail.

There are reasons for this:

  • a malfunction may occur due to the fact that some rules were violated in maintenance, or the installation failed;
  • malfunctions of the Ariston gas double-circuit boiler also occur with insufficient air supply. The combustion chamber must constantly receive air in order for it to work at full capacity. If it is not enough, then, accordingly, various boiler operation problems will appear;
  • malfunctions may also occur due to the fact that incorrect work was carried out by specialists when servicing control units or adjusting the burner;
  • the market is full of low-quality product, so spare parts are also often found to be of poor quality. Even if the work on installing or replacing something went well, a malfunction can still appear precisely because of imperfect spare parts.

This is not the whole list of breakdowns that can occur with a gas unit. But one condition for the repair of all models of Ariston boilers must be fulfilled - this is the call of a master who understands such issues to the house. Working with gas equipment is far from a safe business, therefore it should be carried out by experienced employees who have repair permits and all the necessary spare parts.

Instructions for using Ariston gas boilers

If you are not a professional in the field of installing gas units for heating and do not understand anything about their installation, then you should definitely contact experienced specialists who will help you solve these problems. Firstly, they have all the necessary permits, and secondly, they will instruct you, thanks to which you will “find a common language” with boilers for heating.

Should not be allowed to gas equipment children or those who have not been instructed in the use of the units. Since it is fraught with various consequences. If you are planning to travel somewhere long time, then it is necessary to turn off all the taps on the pipes (gas shut-off valve and water supply shut-off valve) after turning off the boiler. Then you need to disconnect the gas equipment for heating from the network.

During the operation of wall-mounted units, it is necessary to control all the readings that are displayed on the display. The display of wall-mounted heating devices shows all the malfunctions and errors that have occurred during the operation of the boiler. The safety precautions that are written in the instructions must be observed not only with a double-circuit gas boiler, but also with other gas equipment.

Advantages and disadvantages of Ariston gas boilers

Wall units for heating, like any other any technique, has its pros and cons. But, of course, there are more advantages. And if you also follow all the rules for operation, then the minuses will become much less. Models of this company are both wall and floor. Wall-mounted boilers are more popular equipment, as they are mainly intended for heating private houses, apartments, cottages, etc.

Wall units for heating are:

  • with a closed combustion chamber (without designing a chimney);
  • with an open combustion chamber (it is also necessary to install a chimney).

Wall-mounted units with a closed combustion chamber are safer heating equipment, since oxygen will not be taken from the living space. But for them, it will also be necessary to make a forced removal of combustion products. The easiest way is to install a coaxial pipe. It is made in such a way that it can simultaneously remove combustion products and deliver oxygen to the combustion chamber.

Rice. 6

Also, gas wall-mounted units must have a built-in fan. They are considered the safest option to use, but, unfortunately, they are more expensive than open-chamber boilers.

The disadvantage is that the double-circuit gas units for heating Ariston, when the water is heated, cease to heat the living space for some time.

Floor models made specifically for industrial buildings, but they cannot heat water at the same time. Therefore, if, nevertheless, heating water is a prerequisite, then you will also have to acquire a boiler that can be connected to a gas unit for heating.

All wall and floor equipment complies with all safety regulations. Wall-mounted gas boilers are fully adapted to the conditions of the gas distribution system in Russia, as well as the CIS countries. And, despite the fact that there is often reduced gas in Russia, wall-mounted units will still ideally continue their work.

Before buying a wall or floor unit, you must first familiarize yourself with the necessary information, and only then proceed directly to the purchase.

Each owner of his house tries to make it as cozy and comfortable as possible. To achieve this, it is worth thinking about installing an Ariston double-circuit wall-mounted gas boiler, which will help solve problems with heating a dwelling. The device is very useful in that it will provide heat both in an apartment and a private house up to 500 m².

Also, a gas wall-mounted boiler of a double-circuit type Ariston will allow you to quickly heat water for instant use. In this case, a person does not have to connect a boiler, which will require additional investments and a separate place for installation.

Descriptions of the double-circuit boiler Ariston

Today, there are many interesting models on the market for gas boilers. This is quite convenient, since everyone will be able to choose a device that is most suitable for the price, type, characteristics and installation method. Double-circuit wall-mounted boilers Ariston gained their popularity due to rare situations with their malfunction, as well as silence during operation, which is very important for maintaining a calm atmosphere in the house.

One of the most important components in all gas boilers is the burner, in this case it can be modulating or conventional. The first option is more popular than the second. When using it, the entire system will be regulated automatically, without human intervention. In this case, the power of the installed heating equipment depends on the temperature indicators.

The burner is also divided into 2 types:

  • open;

It is the safest, since it does not involve the entry of combustion products into the room in case of emergency. Also in this case, the owner may not worry about building a chimney. It is necessary to bring a special coaxial pipe to the closed burner; it can always be brought out in any accessible place.

An open-type Ariston boiler, in any case, requires a chimney to bring combustion products outside. Also, do not forget about natural traction. Air will enter the system from the living quarters, so it will have to be constantly ventilated.

coaxial pipe used in closed system combustion, the good thing is that it is made of 2 layers. One is necessary for the withdrawal of combustion products, and the other will ensure the entry fresh air inside the boiler. Thus, the owner of the equipment does not have to constantly ventilate the room and worry about natural draft. The room will always have enough oxygen.

Distinctive abilities

According to reviews of gas wall-mounted double-circuit boilers Ariston, they have 4 distinctive features useful for their owners:

  1. All models of this company are equipped with automatic protection systems.
  2. The presence of a water pump, which is necessary for the constant circulation of water through the pipes.
  3. Possibility to choose a model with expansion tank. With its help, automatic pressure control will occur inside the heating system.
  4. Ariston equips its equipment various types ignition. It can be automatic, which will greatly facilitate the life of the owner of a particular boiler. Otherwise, each time the unit is started, a person will need to press a special button.

What are the advantages of Ariston gas boilers

Recently, the popularity of the Ariston brand has increased significantly due to high-quality gas boilers, and this is not in vain. operates silently and consumes as little fuel as possible. This will allow the owners of the unit to save on utility bills and, at the same time, provide comfort and warmth to the house.

The client will receive quality device, which provides round-the-clock water supply and heating of the house, even with a large area up to 500 square meters. Also, do not forget about the durability of the service of each boiler. The terms indicated in the guarantee are much more modest than they actually turn out to be. In terms of dimensions, the equipment is much more compact than other brands, which means that it can be installed absolutely anywhere, even in a small apartment with limited space.

Specifications

Almost all gas boilers from the Ariston brand have a capacity of 15 to 30 kW. Thus, each client will be able to choose the necessary indicators for the size of his apartment or house. It is also worth noting other distinctive characteristics of such gas equipment:

  • with maximum efficiency, boilers have a high level of efficiency;
  • all wall-mounted boilers have Russian instructions and designations on the equipment itself, so citizens do not have problems with controlling the unit;
  • most models from this manufacturer are able to perfectly cope with water in the system and low pressure;
  • special attention to this equipment should be given to those people in whose houses power surges often occur. Ariston boilers can easily cope with such jumps in the network;
  • All models are very easy to operate. To start using the boiler, you do not need to study the instructions for a long time, all the features of operation are intuitive and accessible even for those who install such a unit for the first time.

In some cases, the boiler cannot simultaneously heat water and provide sufficient space heating, this applies to budget models. In this case, a person needs to think about installing an additional boiler.

Note! If we talk about expensive units, they have a special display that shows different characteristics, including the temperature inside the boiler and outside. This is very convenient in terms of introducing the necessary characteristics for the correct operation of the equipment.

Operating instructions for gas boilers Ariston

Before purchasing an Ariston gas boiler, you need to understand that if the buyer does not understand its installation, it is better to contact experienced specialists and entrust all the work to them. After all, even at the maximum detailed instructions not the fact that the case will end successfully. In this case, there is every chance of damaging the equipment, after which you will have to call repairmen, and this will result in additional costs.

It is very important to keep children away from the equipment. To do this, after, it is necessary to have a conversation with them and explain in an accessible language that nothing can be twisted and put on the unit, only an adult should do this. If the family leaves, for example, on vacation, after the boiler is turned off, it is also necessary to shut off all pipes for the supply of gas and water. Only after that the equipment is disconnected from the network.

If a display is provided on any model, all indicators that it displays must be strictly controlled. It can display malfunctions or deviations from normal operation that occurred during the heating process.

One of the most important points in the instructions for gas equipment is safety. Before connecting the boiler, you need to familiarize yourself with it first.

What are the types of wall-mounted boilers Ariston

All Ariston boilers are divided into 3 series. They have different technical indicators and functions, namely:

  1. Clas - this series refers to more bulky and powerful devices for heating residential premises. They are equipped exclusively with special regulators that automatically regulate the gas supply. This is necessary to save fuel, which is very convenient in terms of utility costs and frequent business trips for the home owner.
  2. Genus. These are the most innovative and multifunctional models of Ariston gas units. They have more features than other boilers from this manufacturer. Together with the equipment itself, the buyer will receive such additional accessories, as a fan, necessary for smooth speed control, as well as heat exchangers, primary and secondary. All devices from the Genus line are distinguished by the presence of a large liquid crystal display. It will display all the characteristics that correspond to the operation of the boiler at the moment.
  3. Egis. Units from this series have small size and attractive appearance, which earned them great popularity among owners of small apartments. The device will fit well into any interior. An important feature of these boilers is that, for their size, they have a fairly high level of efficiency and low fuel consumption, which is controlled by an intelligent control system.

Because of what the wall-mounted boiler may be faulty

The main reasons for the malfunction of Ariston gas boilers include the following:

  • During the maintenance of the burner adjustment or control units, specialists made mistakes.
  • Failed installation.
  • Buying a fake, which is distinguished by low-quality components.
  • Lack of sufficient air supply.

Conclusion

When buying one of the Ariston wall-mounted gas boilers from the seller, you need to check the availability of all the necessary documentation, which

confirm that the equipment corresponds to the manufacturer. Only in this case, problems with the device will arise very soon.