Options for fastening the economic panel to the wall online. Buy Ekonompaneli and mount on your own - it's real! Installation instructions for economical panels. Accessories for economy panels
Installation of economy panels does not take much time and does not require additional skills, which allows them to quickly arrange and open a store, as well as remove them and mount them in another place without the slightest damage to appearance. Fastening of the economic panel is carried out to the surface of concrete, brick, drywall, wooden beams.
Due to inaccurate loading, chips, scratches and cracks may occur on economy panels, therefore we recommend that economy panels with a size of 1200x2400mm and a weight of 40 kg can be carried by 2 people.
Required tools:
- Level
- self-tapping screws
- Drill
- Screwdriver
Installation instructions for economical panels
Before installation, the econom panel should warm up to room temperature. Prepare the walls of the room in advance for the installation of economical panels. Install the panel in the right place against the wall, check the horizontal level of the upper end or any groove with a level. Firmly press the panel against the wall and use a drill with a drill with a diameter of 4.5 mm to make holes in the grooves of the economy panel, marking the hole in the wall with the end of the drill.
We recommend making at least 9 holes (3 each in the top, center and bottom grooves) for panels used for light loads. For heavier goods, increase the number of holes to 15 in 5 slots. Horizontal panels have special half-grooves for alignment, start their installation from the bottom.
For plaster walls, you will need plaster dowels and self-tapping screws 4.5 x 40, for concrete and brick walls it is necessary to use plastic dowels No. 6 and self-tapping screws 4.5x40. If the walls are made of plywood and chipboard, the economy panels are mounted on self-tapping screws 4.5x40 without dowels. If the walls are uneven or if it is necessary to leave room for electrical wiring, the economy panels can be mounted on a drywall profile or vertical bars using 4.5x25 self-tapping screws; 4.5x30 or 4.5x40.
Next, attach the economy panels with self-tapping screws directly to the wall through the pre-drilled holes. Place the plastic or aluminum inserts with the groove up by pressing them. Wipe the panel with a soft damp cloth. We do not recommend the use of abrasive detergents– they may scratch the surface of the panel.
Place the selected accessories (hangers, shelf supports, hooks, baskets, etc.) in the grooves of the economy panels. The minimum distance between accessories with a maximum load of 10 kg per accessory is 20 cm.
Docking of economy panels
If you want the design to look like a single monolith, then cover the joints between the panels with inserts or overlays.
Econompanel- Today, a fairly common and convenient element of commercial equipment. It was developed by Abbott, a Russian-British joint venture. "Ekonompanel" - registered trademark. Currently, in Russia, several enterprises produce this type of commercial equipment. But, as experience shows, the founder of this product still has the highest quality economy panels. Econompanel(sometimes they write an economy panel) to be mounted on a wall or racks from joker systems, planks, hangers, brackets and hooks are installed on it. Then the goods are hung on the hooks or additional elements like shelves made of chipboard or plexiglass.
Standard economy panel (economy panel) has dimensions of 1200x2400 mm, but, nevertheless, it can be cut into all sorts of shapes and sizes. On the surface of the MDF board there are grooves with a pitch of 100 mm, hooks and brackets are easily inserted into them, you can place them in any convenient place on the panel at your discretion.
Basically, the material from which the economy panel is made is MDF board, but recently plastic economy panels have appeared. Such economy panels consist of small separate blocks of 3-9 lanes, which are lighter than MDF economy panels, do not require inserts, but at the same time withstand less loads. Econompanel- this is a convenient and compact element of commercial equipment, which makes it possible to hang or lay out goods for sale. Econompanel is inexpensive, easy to use and install. A large number of types of coatings on the front surface of economy panels makes it possible to use this element of commercial equipment both in inexpensive departments and in the most prestigious brand stores. The name "economy panel" comes not from the fact that it is cheap, but from how it allows you to economically spend the retail space of the rented premises, prudent entrepreneurs take into account every square centimeter. Manufacturers offer a fairly large selection of colors and coatings, so entrepreneurs can choose the interior and design of their store. Using economy panels, it is possible to manufacture a variety of exclusive commercial furniture, the main modifications are provided in our directory .
Fastening of economy panels.
Essential in the use of economical panels is the fact that they are easy to install and fasten to the walls. However, it is necessary to take into account the peculiarities of attaching economic panels to various types of walls. For example, when fastening to a plasterboard wall, if it is built correctly, a vertical post should be installed every 60 cm, which can be detected with a magnet. Econompanel usually fastened to the wall through the grooves and drywall with metal screws 35-50 mm long in increments of 3 grooves, three screws in a row. If suddenly the builders saved on racks, then with a small load, it is possible to fasten the economy panel to drywall with wood screws, but already 5 pieces in a row and through one groove. In case of a heavy load, it is necessary to drill holes in the grooves with a diameter of 5 mm, attach the economic panel to the wall, align the vertical with a level, mark the places of future holes in the wall. Then drill holes in the drywall with a diameter suitable for the “butterflies”, install the “butterflies”, fasten the economy panel with metal screws 50-70 mm long. When installing to the main wall, it is necessary to attach the economy panel to the place to be installed and, if necessary, raise it to a certain level, resting it on a pre-prepared piece of chipboard from the floor right size. Using a perforator, drill holes in the wall with a diameter of 6 mm directly through the grooves of the economy panel, insert a dowel-nail 80 mm long into the hole, hammer it in without releasing the panel, check the vertical and, if necessary, correct the economy panel. Drill the next hole, and so on. Economy panels it is desirable to install two, although in some cases, when it is installed on the floor, it is possible, and one. In some TSCs, it is forbidden to mount commercial equipment to walls, floors and ceilings; in these cases, the panels must be installed in frames made of joker pipes, which give the necessary rigidity to the economy panels. They can also be installed on frames made of prefabricated rectangular pipes or screwed as rear walls or items of commercial furniture.
Accessories for economy panels.
For economy panels in our company you can buy all kinds of hangers, hooks, including those with price tags and brackets for various goods, such specific items as stocking stands, plexiglass shoe shelves or shirt stands.
To ensure the durability of the grooves of the economy panels and strengthen them, there are special plastic inserts that increase the service life of the economy panels. Inserts, thanks to a large enough color scheme, also allow you to create various design solutions for the interior of the store. For cases when there is a need to hang especially heavy goods, there are aluminum inserts. 23 grooves are cut in the standard economy panel, so when buying, you need to take into account the number of required inserts.
Sawing of economy panels.
In addition to the sale of economy panels, we offer you sawing of economy panels (economy panels) according to your size, we can also arrange delivery not only in Ufa, but also in other regions of Russia.
Sale of economy panels in Ufa.
We can always offer you to buy economy panels in standard colors available in our warehouse - white, gray, beech. But if you need to buy economy panels of other colors, we can supply them under the order in a short time. The price of economy panels, depending on the size and quality in Ufa, ranges from 500 to 2600 rubles, although these values \u200b\u200bmay change seasonally. So call and check the price. There is delivery in Ufa and, if necessary, by a transport company throughout Russia
All reviews on Yandex.MarketI buy not the first time. Everything is civilized, and most importantly, the goods are of high quality (without marriage).
I just advise.
Pros: Made an order yesterday (03/04/2020). Due to the workload, it was not possible to wait for delivery all day. I asked the service to bring in the morning, as early as possible (if possible). Today (03/05/2020) already at 09:00 they called and warned that in 30 minutes my order would be with me. Very fast! Order received in in full, all on the list.
Cons: Didn't make 1 cut, but rather because I was in a hurry. Not a problem, sawed himself in 1 minute.
The order was delivered quickly, everything is safe and sound. Nothing to complain about!
Pros: Good discounts for bulk purchases. Quality is monitored here, agreements are observed. Everything is official and fast. A large selection of commercial equipment, thanks to this, I was able to choose retail racks without any problems. The purchase was worth more than 70 thousand, so they gave me a discount as a wholesaler.
Cons: no problem
Helped with the organization of an outdoor holiday event. Ordered mostly stalls. The price tag came out decent, but that's why the discount for wholesale was solid. The main condition was delivery a few days before the start of the event. Consider the request carefully. On the day of delivery, the car was in place on time, checks for payment were handed over along with the driver.
Economy panels become more popular, the higher the price for renting retail space. With them, it will be possible to effectively use every centimeter of space. Even a non-professional can figure out how to fix an economy panel to a wall by reading the instructions or watching a video. Installation of the economic panel takes a little time. The undoubted advantage of this equipment is the possibility of dismantling and subsequent assembly in another store and in a different configuration. The panel does not lose its appearance, it is enough just to carefully carry out all the work, especially with fasteners, then it will serve you for a long time, without cracks and chips.
Surfaces on which the panel can be mounted
Surfaces suitable for hanging the panel:
- concrete;
- brick;
- drywall;
- wood;
- Chipboard partition or stand.
For accurate and quick installation, the presence of two people is required. We remind you that it is better not to transport a panel weighing 40 kg and measuring 240x120 cm (this is the maximum size of one panel) even if there is a cargo trolley. You will also need building level, fasteners that came with the panel or separately purchased self-tapping screws, a drill, a screwdriver, a pencil for marking.
The sequence of actions for the installation of economic panels
Nuance: if the panel was previously outside during the cold season, then in order to avoid cracking during drilling, let the sheets warm up to room temperature in the room. It is desirable to clean the walls, but they do not need special preparation.
Mark a horizontal line using a spirit level. Attach a panel to this line, check the horizontal position. Through the panel, mark future holes in the grooves with a drill. Then the sheet is removed, the holes are drilled completely.
Check the drill diameter with the fastener parameters, usually 4.5 mm. If the load on the panel is small, it is enough to make three holes in three grooves (nine in total). For heavy goods, it is better to make three holes in 5 grooves. Mounting types for various kinds economy panels:
1. Drywall: plaster dowels and self-tapping screws 4.5x40.
2. Concrete and brick: dowels No. 6 and self-tapping screws 4.5x40.
3. Plywood, wood, chipboard: ordinary self-tapping screws 4.5 by 40 are enough.
If you need additional confidence in the reliability of fastening the panel (for example, with an uneven wall), then self-tapping screws 4.5x2.5, 4.5x30 or 4.5x40 and a drywall profile (or wooden blocks, Chipboard bars left over from any work). Behind a panel slightly lagging behind the wall, wiring and Internet cables are sometimes hidden.
Through pre-planned and drilled holes, the economy panels are attached to the wall with a screwdriver or a screwdriver. After that, special inserts are inserted into the grooves (until it clicks). Plastic ones are cheaper, but aluminum ones are more reliable. Now you can place a hanger for goods on the panel: brackets, shelves, baskets, etc. The distance between accessories must be at least 20 cm. One accessory is designed for a standard load of about 10 kg (if you used an insert in the groove, then this figure is multiplied by 2, that is, 20 kg).
INSTALLATION OF TRADING PANELS (Economy panels)
An important advantage of our panels is their simple and quick installation, thanks to which they can be used to design and open a store in the shortest possible time. At the same time, the installed panels can always be removed and mounted in another place, without the slightest damage to their appearance. This feature allows you to quickly re-register the trading floor or change its functionality.
Installation of panels does not require any special professional skills, it is simple and fast. Fastening of trading panels is carried out to surfaces made of concrete, brick, drywall, wooden beams.
Required Tools:
1.Level
2. Self-tapping screws
3.Drill
4. Screwdriver
INSTALLATION INSTRUCTIONS
Allow the panel to warm to room temperature before installing. Prepare the walls of the room for the installation of panels.