Device for drying fish. How to dry fish so that a fly does not sit down? Fish drying box. Electric dryer for fish

25.10.2019

Dried and dried fish is one of the most popular snacks in our country, and it would be strange to pay money for it if you yourself like to fish, and even boast of abundant and regular catches. The simplest version of a do-it-yourself fish dryer can even be an ordinary clothesline with clothespins on which the prey will be attached. To protect against midges, the catch can be protected with a mosquito net thrown over the top, but with the “production” put on stream, this does not look serious.

Home-made drying for fish of a decent appearance and the same functionality can be done at home by placing a large number of slaves in a small space and providing good ventilation and protection from curious insects at the same time. In rural areas, such a solution is especially relevant, since not only fish, but also mushrooms, and even meat can be dried in a similar way. Two variants of this design can be distinguished. Let's consider each of them in more detail.

Demountable hanging cabinet

In private homes, in most cases, they resort to making a box, covered on all sides with a mosquito net to protect against insects. Depending on the size, such a structure can be hung on a wall or even be multi-tiered and stand on the ground - then up to several dozen fish can dry in it at the same time, but the likelihood of access by ground insects increases. The dimensions of the future box are determined only by you, based on your fishing abilities.

For good air access, the box should not have walls - in fact, we are talking just about the contour frame. For its manufacture, a bar is usually chosen or wooden slats, whose thickness should never be less than 2.5 cm. Moreover, in many cases it makes sense to take a thicker material if the structure has many tiers, or its volume allows you to hang several kilograms of fish at once. In order not to be mistaken with the amount of purchased material, you can draw up a drawing in advance.

Just keep in mind that any box of a relatively large size will not interfere with the presence of additional spacers for strength and stability. When purchasing a bar, it is worth taking it with a small margin - just in case.

For beauty, wood is often sanded and then painted, but it is more reasonable to do the first procedure before assembling the structure, and the second after assembly. The polished slats are cut so as to make two identical rectangles out of them, which will become opposite walls. You can connect them together either with several separate spacers, or with two more equal rectangles. After all this, one more rectangle needs to be made according to the size of one of the walls - it will serve as a door. For the perfect correctness of all corners, most craftsmen advise using special metal corners. small size, sold somewhere in the neighborhood with the same lumber.

When the frame is ready, if not painted, then at least varnished, because wood, and even outdoors, will last much longer.

Paint and varnish must be chosen wisely: they must protect the wood from water and salt deposits, but at the same time be environmentally friendly, because toxic fumes will surely soak the fish.

In the upper part of the box, as well as between the spacers of the lower tiers, you need to stretch a twine or wire on which the fish will be hung. The density of the rows and the vertical distance between the rows should be determined based on the size of the catch you can usually show off. Choosing among twine and different types wire, focus on the ability to withstand rain and withstand the expected weight of the catch, it is also reasonable to provide an easy option to replace sagging or torn pieces.

When this stage is also passed, you can start fitting the mosquito net - usually it is simply cut into fragments of the required size and simply nailed to the slats in a taut state. In this way, all sides of the box are trimmed, except for the one left for the door, and with the planned tight hanging on the wall, the opposite side may also be left without a grid. The door itself is also upholstered with a mesh, after which it is attached with hinges to the “doorway”. The final touch will be the creation of a “heck” of two or three nails, but here it is worth approaching the task as responsibly as possible so that not the slightest gap remains.

If it suddenly turned out crooked, and there are still cracks, you can paste them on the outside with a sealant.

Many, by the way, do not want to make the door on their own, but specifically adjust the dimensions of the box to the dimensions of a standard mosquito net on the window in order to use it as a door. The very lazy ones may not assemble any frame from a bar at all, simply by connecting several such grids together.

Some craftsmen do not like the fact that when the door is open (at the stage of hanging the fish or extracting part of the prey), insects can get inside, therefore, instead of doors, they sew a zipper into the mesh. This can make the inlet much smaller and easier to control, but this approach tends to degrade the mesh on that side more quickly.

Drying chamber with fan

This design is more intended for the city - at least, it not only can, but should be inside the building, since it requires electricity to operate.

Any box can be used as a frame, only now with integral walls and the possibility of tight closing. You can put it together with your own hands, but the use of large (at least 20 liters) is much more popular. plastic containers from anything.

The ventilation grill is usually built into the box cover located on top, but a small one is installed in one of the narrow side walls. exhaust fan window type, so that by its efforts the air flow passes through the entire box. The presence of an electric fan allows you to completely level the absence of a draft due to the lack of free air circulation in the room, therefore even the dense walls of a plastic box will not interfere with the rapid achievement of results - in most cases, this design dries the fish faster than the classic one with a net and fresh outdoor air. In the upper part of the box, metal rods with a wrench thread are attached, which are fastened on the outer sides with the corresponding nuts - we will hang fish or other products on them.

On this simplest design home drying cabinet could be finished, but some craftsmen offer options to improve the design. So, it's no secret that for normal drying, not only a constant supply of air is needed, but also a fairly high temperature, which in winter time even indoors is not always achieved. A good solution to increase the temperature inside the cabinet is to use an electric mat, available at the pet store, as it is essential for the comfort of most pet reptiles. You can go the other way, providing a place inside the box for installing ordinary incandescent bulbs, which also heat up significantly during operation, but they will take up more space and may require numerous holes in the frame.

When installing any equipment for raising the temperature, it must be remembered that water flowing or evaporating from the dried products should not get on the heated surface, and even more so on electrical contacts.

Both design options are quite effective, tested over the years of operation and used by hundreds of thousands of our fellow citizens, as evidenced by the positive feedback on various fishing forums. Another thing is that for beginners who decide for the first time to try to dry fish or mushrooms on their own, the first pancake comes out lumpy. Out of ignorance, such people often sin on an unsuccessful design, although the reason for the spoilage of products or their very specific taste lies not in the crooked hands of the master, but in the banal non-compliance with the technology for preparing the catch.

For example, it makes no sense to dry fresh fish - the finished product will turn out to be completely tasteless and few people will like it. Before being sent to the drying cabinet, the fish must be salted for at least 10-12 hours, and not any salt can be used for this - only coarse-grained is suitable, and iodized and "Extra" are considered completely unsuitable for these purposes.

Another common mistake is to thoroughly wash the fish before salting - although this may seem unhygienic, this should not be done. The fact is that the inhabitants of the depths are already an excellent breeding ground for various microorganisms, and the increased presence of water also contributes to this, at the same time slowing down the drying process.

Dryers for fish of various variations, of course, are sold in the store. But to do something with your own hands is a pride for a real man, and even more so for a fisherman. It is possible to dry the catch without a special design, however, all the “old-fashioned” options (on clotheslines, on a balcony, attic) do not exclude the possibility of product contamination.

We make a dryer for fish on our own

First of all, you need to decide what kind of dryer you need, and what materials you have for its manufacture. The “insides” of the dryer are strings, hooks are not difficult to manufacture. They can be quickly built from:

wires;
clothesline;
strong threads twisted in several rows.

It is much more important to properly make the body of the dryer itself, which will prevent flies and wasps from getting inside.

From plastic boxes

For the manufacture of such a dryer, absolutely any plastic box, of any shape and size, will fit. Since this material does not allow air to pass through, this structure will need to be equipped with an exhaust hood. In addition, you will need:

Corners (plastic or duralumin).
Glue or liquid nails.
Fasteners (bolts).

Of the tools enough:

jigsaw or clerical knife;
screwdriver.

The advantages of this design are that it is very easy both to operate and to assemble. In addition, it is easy to disassemble and wash.

From plastic panels and corners

The construction of such a dryer is similar in some respects to the installation of the model described above. The only difference is that in the first case we take a ready-made box, and in the second case we make it ourselves according to the dimensions we need.

For the design you will need:

Plastic panels.
Guides, corners, finishing strips.
Liquid Nails.
Wire for rods.
Hood.
Mesh for closing the inlet.

From wooden blocks

The simplest and most reliable is a fish dryer made of wood blocks. For its manufacture you will need:

bars;
self-tapping screws;
mosquito net or tulle.

Other options

List all possible options constructs make no sense. But to get you up to speed a little, let's just divide the dryers into categories:

Framed and frameless.
Foldable and one-piece construction.
Mobile and stationary.

Practically any of them can be built with your own hands.

Dryer installation

Let us analyze in more detail the assembly of the dryer from a plastic box:

Assembling the dryer plastic panels and corners requires the following actions:

we measure the height of our box on the plastic panel and cut off as many planks as we need. It is not difficult to count them: divide the estimated width and height of the box by the dimensions of the panel and round this number;
in the same way, cut out the details for the bottom and lid of the box;
assembly of plastic panels is very simple: the first panel is fixed in the corner of the required length, all the rest are glued to it in the area of the grooves with liquid nails;
as soon as the side is assembled, we fix the top with a finishing bar, and the bottom and the second edge with a corner;
in the same way we assemble two more sides of the box, and then - the panels of the bottom of the structure;
then we complete the assembly of the last side. Remember that there should be a finishing bar everywhere on top;
we also glue the details of the lid together and ennoble the edges with planks;
then everything is according to the scheme, as in the installation of the first dryer: hood, rods.

Assembling a dryer from wooden bars involves the following steps:

Any dryer for fish can be made at home. The main thing is the presence necessary materials and tools. When choosing a model, be guided by how it will be used: on the balcony, in the garage, in the open. It depends on whether the dryer has any additional designs: legs, hanging mounts, fan, etc.

In summer, fishermen in large numbers turn out to be the owners of a solid catch. The key task in this situation is the possibility of preserving the trophy for a long time. Drying the catch can become a solution to the problem, which will prevent product spoilage for the next 8-12 months. But for drying you need a specialized dryer. It can be either purchased at any specialized store or made with my own hands. For such purposes, a small amount is needed. various materials and tool.

What it is?

This is a specialized device for drying fish, which can be purchased at specialty stores. Dryers vary in capacity, appearance, options, design, cost. When purchasing the installation, it is necessary to take into account that there are a number of modifications of both domestic and foreign manufacturers.

Kinds

The simplest device for drying is considered to be a wire stretched under an awning or an ordinary rope for drying clothes. To protect against flies, a net (or gauze cloth) is simply hung on the fish. Hanging a roach, crucians or bream is allowed both on hooks made of wire, from ordinary paper clips, and clamped with clothespins. This method stands out for its simplicity, but it is optimal for a one-time harvesting of fish in a suburban area or on a hike. When the occupation is put on the “conveyor line”, and good catches are constant, it is necessary to think about a relatively decent design.

Devices for drying fish can be symbolically divided into two large groups:

mobile transportable (portable);
stationary.

Each of these samples has its own advantages. The first can be used anywhere: from the river bank to the loggia in the apartment. Others can be listed as drying cabinets, in most cases they are used not only for fish, but also for drying berries, herbs, vegetables, withering meat and other food purposes. You can simply dry the fish in the open air, or you can organize it with the forced injection of air masses by means of a fan. At the same time, the withering procedure is much faster, and the product is prepared more proportionally. AT cold period the drying cabinet can be equipped with electric heaters, which, in turn, will also allow you to quickly prepare the fish for consumption.

characteristic feature drying chambers is also the number of compartments. As a rule, single-section types are used, but there are dryers with a considerable number of departments, in some modifications their number reaches up to 5 compartments. Let's consider some models in more detail.

factory models

From factory modifications, 2 options can be distinguished. The first one is structurally implemented in the form of a tall cabinet made of steel tubes covered with mesh. Similar samples are produced various firms under trademarks"Kedr" and "Mitek". Another interesting example is the two-level IdeaFisher ECO-2. This collapsible design is also small in size and can be easily carried. Moreover, based on the conditions, it functions both suspended and placed on the floor or table.

Homemade dryers

From the mass of devices for drying fish follows note the following homemade designs:

frame;
folding;
stationary;
suspended;
electric dryer;
with fan;
mobile (portable).

But this is not all that homegrown masters are capable of.

First of all, it is necessary to clarify where exactly the drying will be carried out. If under a canopy, awning or in the attic individual home- there are no problems with dimensions. If in one of the living rooms, on the loggia or balcony high-rise building, then the parameters of future equipment for the dryer must be planned, starting from the possibility of placing it in these premises for drying and further maintenance. In addition, it is necessary to take into account the dimensions and the number of fish caught on past fishing trips. Or balance these conditions for future catches. If the area is very small, it is necessary to analyze the modifications of folding and hanging dryers.

After establishing the desired dimensions, it is required to decide on the choice of materials of manufacture.

materials

It is necessary that steel or wooden materials. Thus, it will be possible to practice it for more than one year. The frame must be stable. In order for the device to be of high quality, it must be fixed with durable components (screws). On top, the base is covered with a thin material (chiffon) so that the fish dries on fresh air. Due to the free movement of air inside the structure, the product will dry much faster.

How to choose?

Having studied all the modifications of the dryers, the vast majority of anglers trust the time-tested hanging samples, which are made of a metal frame and nylon mesh. The key advantages of such a material are the strength of the structure during drying, the protection of fish from unnecessary contact with flies, experience gained over decades. The structure contains many levels, thereby guaranteeing a hit clean air for the production of high quality and non-hazardous food products. To dry the fish after fishing, you can use hanging samples from various companies.

"Three whales". This is a well-known domestic manufacturer that carries out mass production and sale of everything you need for hunting and fishing.

"Cedar". In order to make life easier for anglers, Kedr has additionally created a camping version of the net for drying fish. Its structure is strong and durable, it makes it possible to dry fish on a long trip or in a summer cottage.

Electric dryer for fish. All of the above modifications have manual control, in other words, the desired effect depends solely on the human factor. In fact, such a device can be recreated at home, using several gauze shells, wood (steel) crossbars. Fish need not only be caught, but also hung, along with this, constant monitoring is a natural process of drying it. In order to speed up the final result, it is advisable to use the most advanced modifications - electric dryers. These innovative installations are much more expensive, but in the shortest possible time they allow you to enjoy the memorable taste of dried fish.

How to do?

So we got to the most interesting. Let's talk about how a do-it-yourself fish dryer will be built. It should be immediately noted that there are a huge number of dehydrator devices. It is very difficult to tell about all the varieties of improvised structures within the framework of one article, since the imagination of the domestic Kulibins is indeed inexhaustible. Information! Dehydrator in literal translation from Latin means "dehydrator", in other words, the same thing as a dryer.

Wireframe models

In most cases homemade devices made in the form of a wooden box covered with a mosquito net. And one of the most common is considered a variation with dimensions of 500x500x500 millimeters. At the initial stage of manufacturing, it is necessary to prepare the required amount of wooden blocks, process them with sandpaper and cover with a protective solution. The coating must protect the device from dampness and salt, but at the same time not emit negative fumes that drying products can absorb.

After that, according to a previously made drawing, the skeleton of the future dryer is assembled. Self-tapping screws and iron corners are used for mounting. To create such a box, you need to follow a series of steps.

Mark the timber, then cut it with a jigsaw or hand saw.
After that, using a screwdriver, corners and self-tapping screws, mount the frame.
Rigidity partitions are placed on all sides.
A cable is fixed on the side walls (in fact, the fish is dried on it).
Next, you need to process the box with an insect repellent.

It must soak the material and dry, and only then the box can be varnished. It is absolutely necessary to apply it in 2 layers with a time interval of 4 hours.
On the bottom of the box, it is necessary to install specialized spacing.
The door frame must be sealed. Having done this work, you will have a ready-made box for drying fish, where no insects will be able to get through.
Recommendation! The static dryer can be installed directly on the wall.
After the base is ready, they take up the tension of the mesh. Along with this, it is necessary to clarify how access will be made inside. To do this, make a door or sew a zipper.

Another option for a similar homemade product is the use of not a stretch mesh as a drapery, but devices from modern PVC windows. In this option, it is not required to make a separate door, but to use a frame from a finished mosquito net.

Dryer with fan

Some of the models of dryers made by Russian craftsmen have fans in their own structure. Air heat exchange in such dehydrators makes it possible to force the drying process. They create such devices from a variety of plastic containers or something like closed cabinets through which an air stream is driven. Let's analyze the production process of a simple device with a fan. For this purpose we will need:

large plastic tank - from 20 liters and more;
fortochny exhaust fan;
ventilation grate;
threaded steel rods with matching nuts;
fasteners for grille and fan.

We work in the following order:

in the lid of the tank we make a hole for the ventilation grill and fix it;
we fix the fan in a similar way in any of the side ends of the plastic box;
in the upper segment of the tank we create holes for the rods and insert them, fixing them with nuts (we will hang fish and meat in this place).

If you want to increase the ambient temperature in such a dryer, you can use electric rugs. Such products are sold in pet stores for breeding reptiles.

Yuri Depeshev Updated: 04/25/2017

AT summer period most anglers become owners of a heavy catch. The main problem in this case is to ensure the safety of production over a long period. Drying the catch can be a solution to the problem, which will prevent product spoilage for the next 8-12 months.

However, a special dryer is required to ensure drying. You can either buy it in any specialized store or make it yourself. For these purposes, it will be necessary a small amount of materials and tools.

Before proceeding with the manufacture of the product, you should familiarize yourself a little with its features, which include:

mesh body frame- an obligatory element of the dryer, preventing the penetration of flies inside;
strong cords, withstanding a weighty fish mass - play the role of securing the catch;
arrangement of pallets at the bottom of the dryer- allows you to collect the brine flowing from the fish (especially a lot of moisture is released in the first 3-4 days).

Types of dryers

There are a huge number of varieties of dryers, which are classified according to:

models;
dimensional characteristics;
spaciousness;
manufacturing material.

Among the main most popular types it is worth highlighting:

frame type;
folding;
stationary;
suspension;
designed for drying fish;
universal type (can be used not only for drying fish, but also berries, mushrooms, greens).

Despite a slight difference in designs, they are united by the presence of mesh (gauze) walls that do not interfere with the passage of air masses and prevent the deposition of fly larvae on fish. The presence of a door (for loading and unloading products) makes the placement process very simple.

Deciding on sizes

To load and unload catch from maximum comfort dryer must be properly sized. The best option will be the following dimensions:

height indicator - about 120 cm;
length - 100 cm;
width - 75 cm.

The dryer in this case will turn out to be roomy and it will have at least three levels. Each of the levels should be equipped with three metal rods, which will allow you to hang the catch. A drying chamber with the indicated dimensions allows you to wither 80-100 crucians at a time (weighing about 300-400 grams each).

How to increase the catch of fish?

For 7 years of active passion for fishing, I have found dozens of ways to improve the bite. Here are the most effective ones:

Biting activator. This pheromone supplement is the strongest lure for fish in cold and warm water. .
Raise gear sensitivity. Read the appropriate manuals for the particular type of tackle.
Lures based pheromones.

We make a dryer for fish on our own

To determine the type of dryer, you should initially understand what materials are currently available in the house.

Internal elements drying chamber consist of:

strings;
hooks.

Difficulties in the manufacture of the elements described above do not appear. Usually they are constructed from clothesline, wire and strong threads (pre-twisted in 2-3 rows).

The body is considered the most significant and time-consuming part of the camera. It is he who will protect the catch from insects.
Below are popular options for making dryers from improvised means. The proposed instructions will allow you to quickly build a camera.

The body is considered the most significant and time-consuming part of the camera, it is he who will protect the catch from insects.

Dryer made on the basis of plastic boxes

We select plastic boxes of any size and shape. Given the poor throughput of air masses of plastic, care must be taken to provide the chamber with an exhaust hood.

In the manufacture can not do without the following materials and tools:

plastic corners (duralumin type);
fasteners (bolts);
screwdriver and jigsaw.

Main advantage plastic construction is ease of assembly and operation. In addition, the design can be disassembled, so keeping it clean is not difficult.

Given the poor throughput of air masses of plastic, care must be taken to provide the chamber with an exhaust hood

From plastic panels and corners

This design is similar to the model described above. The main difference in this case is a plastic box (ready-made), which is taken as a basis in the first version. The second option involves making it with your own hands, while setting the desired dimensions.

In the manufacture of the structure, the following materials cannot be dispensed with:

plastic models;
guides;
corners;
finishing strips;
adhesive base (liquid nails);
wire for rods;
hoods;
mesh (performs the function of closing the inlet).

We assemble a dryer based on plastic panels and corners

On the plastic panel should be made box height measurements.
Cut off the required number of strips. To determine the quantity, you will need to divide the length and width measurements (estimated) by the dimensional indicators of the panel. At the end, the number must be rounded.
Details for the surface are cut in the same way. bottom and cover of the drying chamber.
Installation of plastic panels is quite simple. One of the panels is fixed in the corner of the required length. The remaining panels are fixed in the groove area with liquid nails.
Having collected the side to the end, we proceed to fixing the upper part with a finishing bar. The lower part and the second edge are fastened with a corner.
The following sides of the camera are assembled in a similar way. After that, we install the panels on the surface of the bottom of the structure.
Having collected the last side, we check that at the top of the product along the entire length there was a finishing bar.
The elements of the cover are glued together and the outer edges are ennobled. parts thanks to the use of slats.
We place the rods in the same way, as in the previous variation of mounting the dryer from a box (plastic).
We equip the product with an extractor hood and use the design for its intended purpose.

From wooden blocks

A dryer made on the basis of wooden bars is considered the simplest design. Before manufacturing, you should take care of the preparation:

self-tapping screws;
bars;
mosquito net (tulle).

Dryer installation

By following some simple rules, you can quickly make a drying chamber. Consider an option based on a plastic box.

Step by step build process

Using a jigsaw, cut a couple of holes on opposite sides of the box.
In the first hole we place the hood(fastening is carried out using liquid nails).
The next hole will be required for the passage of air masses. We close it with a grid using an adhesive base.
We fix the corners, creating a kind of shelf, its ledges will serve as the basis for fixing hooks and fish.
Corners should be placed parallel to one another on opposite walls. If the height of the box allows, then several rows can be built.
We drill small holes in the corners, keeping a distance of about 9-10 cm. All pairs of corners are equipped with identical holes.
Using thick wire we make rods. To do this, we measure the box from one extreme point to the other and add a couple of cm on each side. We cut the required number of rods.
On the first side, we make a bend of the surplus amount of the rod, observing an angle of 90 degrees. Through the opposite side, we string the catch (through the eyes). The second side is bent similarly to the first and inserted into a pre-prepared hole in the corners.
Turning on the hood and covering the structure with a lid you can use the dryer for its intended purpose!

A dryer made on the basis of wooden bars is considered the simplest design.

Installation of a drying chamber from wooden beams

Walkthrough

For ease of use, a structure on legs should be made. Based on this, it is initially recommended to make measurements of the height of the product together with the supporting elements.
We cut the bars and connect them together with the help of self-tapping screws.
The frame part is ready!
Both sides of the frame are equipped with additional bars on which the strings will be placed. For their manufacture, clothesline or strong rods can be used.
Starting from the top, the design is tightly fitted with mesh material. and fixed with a construction stapler.
Any of the available improvised materials can act as a cover.

Any of the dryers can be made by hand. The most important issue in this case will be the acquisition necessary tool and material. When choosing a model, it is important to take into account the features of using the drying chamber. This will allow you to predict the need for equipment additional elements such as feet, suspension brackets, fan, etc.

Additional Options

You can list design options for drying fish to infinity.

Another popular additional option for a drying chamber is a product with a grate for output.

In the manufacture of such a dryer, you can not do without:

hoods (80 cubic meters);
gratings for output;
duralumin corners (you will need a couple of pieces with a length corresponding to the length of the large side of the box);
bolts (10-12 pieces will be required to fix the corners and hoods);
liquid nails;
metal rods with a diameter of 3-4 mm - 10 pcs.

Step by step installation process

We mark the areas for the holes for the exit and a hood on the smaller sides of the drawer.
Dimensions should not be more landing diameters of the exit.
Holes are cut using a jigsaw.
One of the holes accommodates the hood. You can fix it to wall panel with 4 bolts.
The second hole is closed with a grate planted on the side border with liquid nails.
Dural corners are fixed on two opposite sides of the dryer, in the lower and upper regions. Fastening is done with bolts.
On the resulting shelves, 6 holes are drilled (through). It is very important to place them evenly on both corners.
We construct metal rods from durable stainless wire in the required quantity.
We mount the rods and use the drying chamber at the destination.

How is it done do-it-yourself fish dryer photo on our website will show all the steps. It is not at all difficult to make it. Today our article is about how quickly you can quickly make a fish dryer from improvised and inexpensive materials. If you fish not far from home, and you have a stationary, convenient large dryer for fish, that's good. But if a trip is planned for several days with handkerchiefs and outdoor recreation, then experienced fishermen will definitely not forget to take all the tackle with them or make a float fishing rod themselves on vacation.

Here imagine you have a rich catch , boiled fish soup , baked fish in foil , and there is still a lot of it left . We offer you a good option, dry it or wither it and bring it home and enjoy ramming with friends with a beer and remember what a wonderful catch it was. Also, this unpretentious device can be taken unassembled with you when traveling to the sea and dry gobies, which are found in abundance in salt water. And most importantly, annoying flies, which are attracted by the deliciously smelling dried pike perch, will not be able to get inside and spoil such a wonderful product.

Formaking a dryer with your own hands you will need:

An old umbrella, the main thing is that it unfolds and the dome is intact.
Fine mesh or thick gauze.
A needle and thread to sew a bag or you can prepare it in advance at home and sew a snake along the entire height for convenience.
Wire for the manufacture of the lower ring.
Drawstring or rope for tightening at the top and bottom of the dryer.
Hooks or clips for hanging the catch.

Making a dryer with your own hands is not difficult at all:

Sew mesh or gauze along the diameter of the umbrella.
From the wire we make a ring, which is equal in size to the diameter of the umbrella.
At a distance of 70-80 cm, we fasten a wire ring on the grid with a thread and a needle.
Below the ring we skip a rope or cord to tighten the dryer.
We attach a loop or hook to the top of the umbrella in order to hang our invention.

How to use the dryer

P raising mesh or unfastening the snake , salted fish is hung on hooks , the protection is lowered below , tightened with a cord . Large bream, crucian carp, roach must be butchered, but not scaled. You need to hang in the shade and in a draughty place. Everything is ready , you can not worry about your catch , it is reliably protected from flies and insects . Such a dryer for her is compact, does not take up much space in the luggage, and most importantly, you can bring ready-made dried fish home and treat relatives and friends. You can use such a dryer not only in hiking, natural conditions, but also at home. The main thing is an excellent, high-quality ram.