accessories 

Making batteries in the kitchen. How to close the radiator: ways to hide the radiator with your own hands (105 photo ideas). How to hide the radiator and keep the level of heat dissipation

The radiator as an element of the heating system does not always meet the aesthetic expectations of the owners of the house or apartment. Many people want to decorate such structures, smoothing out their effect on the interior as a whole. However, before you close the battery, you need to carefully weigh the pros and cons, because an improperly installed design can significantly reduce heat transfer.

decoration

The battery may or may not be covered. There are several alternative ways hide radiators if they do not fit into the interior.

Painting

It is enough during the repair to remove the old coating and repaint the surface. To do this, use a special paint that is resistant to high temperatures. The color must be selected to match the interior of the room. True, this option is best used with modern aluminum batteries. Painted cast iron products will stand out strongly.

It is not necessary to make the radiators plain, they can be decorated with various patterns. This is especially true in the children's room or in the kitchen. If artistic skills are completely absent, you can use special stencils.

Curtain


You can close the heating battery with a cotton curtain. The truth is option is suitable only for products installed in a niche. You can attach the curtain to the window sill with Velcro, the fabric should be matched to match the wallpaper. Blinds can be used as an alternative.

Decoupage


Using ordinary napkins and PVA glue, you can also decorate the heater. This is easy to do with your own hands, special skills and expensive materials are not required. It is enough to pick up napkins to match, cut out the necessary elements and glue the radiator with them. On top, you can apply a special heat-resistant varnish.

Screens

If decoration heating appliances for some reason does not suit you, you can hide them under special gratings or perforated screens. These devices are made from various materials have a variety of shapes and designs.


When choosing a screen, it is worth remembering that the better the perforation is, the more heat from the radiator will enter the room. Blind side and top bars seriously reduce battery efficiency.

glass


Screens made of thick glass will successfully hide the heater. You can purchase options with photo printing or whole glass paintings, such products look beautiful and very stylish. Glass screens only cover the outside of the battery. Fastened with screw holders with elastic protective pads.

Mounted

You can hide the radiators with the help of hinged grilles. Most often, such products are used for those located in a niche under the windowsill. Everyone will also cope with the installation - you just need to hang the structure on the heater.

Wooden


Best suited for rooms with classic design. In addition, wood products can be used as a stand. However, there is a drawback to such a screen. It consists in a short shelf life of products. Alas, the tree, regardless of quality, will sooner or later deform under the influence of high temperature and simply dry out.

What can you do yourself?

Now there are many opportunities to design screens for heating appliances with your own hands. The easiest way is to close the radiator with drywall. This versatile option is suitable for any room, from the living room to the kitchen.

Necessary materials and tools

  • pencil and tape measure;
  • perforator and screwdriver;
  • metal scissors and a clerical knife;
  • level, stapler, sandpaper;
  • self-tapping screws;
  • drywall, UD and CD profiles;
  • lattice.

frame

In order to close the radiator with drywall, you need to make a frame. To do this, the UD guide profiles are fixed with self-tapping screws to the underside of the window sill, walls and floor. The front edge of the resulting frame is deepened by 13 mm, so that after plasterboard sheathing, the surface of the screen coincides with the wall.


Then CD profiles are screwed vertically, and the distance between them should be slightly more sizes gratings.

sheathing

With the help of a knife, blanks of the desired size are cut out of the drywall sheet. Then drywall is screwed to the frame with self-tapping screws. Screw heads should not be deeply recessed, otherwise the sheet may break and the structure will not be securely fastened. On the last step fix the decorative grille.


Drywall constructions fit perfectly into the interior, but significantly reduce the efficiency of the radiator. The small space for warm air to flow makes convection difficult. Therefore, when choosing a screen or decorative design, you need to find a balance between aesthetics and a minimum decrease in heat transfer from the radiator.

The cold is just around the corner, and it is already worth paying attention to heating radiators, and thinking about how they can be hidden so that they do not spoil the interior. There are quite a few creative ideas, which will allow you to turn batteries into a decorative element and use them practically.

Interior style disguise



In a beautifully designed interior, all objects and elements should one way or another overlap with each other and form a single style. Heating generators in this case are also no exception. They, of course, are simply obliged to fit into the common space and only decorate it, and not spoil it. Therefore, it is worth worrying about a decent disguise of the batteries in advance. In the classic versions, screens in an elegant style, made in light shades - ivory, beige, noble white, will be appropriate. Laconic wooden models without elaborate decor will look good in a Scandinavian or modern interior.

Choosing the Right Material



The choice of material from which the screen will be made must be approached no less scrupulously than the design of the product itself. First of all, the selected material must be resistant to high temperatures. Today, such screens are made of metal, plexiglass, wood, plastic and plywood. The most reliable and popular of them are metal and plywood. Wood can deform over time, and it is expensive, plastic is only suitable for offices and non-residential premises, glass can interfere with heat transfer during heating.

Warmth or beauty?



When choosing a screen, there is another dilemma: what to put in the first place - beauty or to take care of warmth to a greater extent. Here it is already necessary to build on how severe winters are where the apartment is located. If you want to reduce the flow of heat and it is hot in the apartment in winter, then you should take a closer look at the closed options. If space heating is in the first place, then you need to choose options without additional gratings, as well as as light and patterned as possible.





Practical use of the radiator



The most interesting thing is that thanks to the screens, the battery can be used as an additional place to rest, as a shelf or stand for decorative elements. Thus, two birds with one stone are in the hands at once - the battery is disguised, the interior looks great and at the same time it has additional element performing practical functions.






Batteries in the house are far from the element that you want to see naked. Of course, each battery is usually hidden by a special panel. However, is this approach sufficient? If not, then you can do something for this yourself. This review has collected almost two dozen great ideas on this subject.

1. Pallet



A carefully cleaned and light-colored pallet can make an excellent screen for a radiator, and wooden plank, nailed on top, will also allow you to get an additional shelf for flowers and decor items.

2. Bookcase



A large cabinet with bookshelves at the top and an inconspicuous lattice battery screen at the bottom is a perfect example of how you can hide an unsightly battery while adding extra storage.

3. Bench



A small bench, built around a radiator, will be a stylish detail of the bedroom interior and a cozy place to read.

4. Under the table



The space above the radiator in the kitchen can be used to create a wonderful dining area with wide window sill, acting as a table, and a lot of drawers on the sides.

5. Bamboo



A wonderful wide screen for the radiator, covered with an original bamboo grill, which will not only hide an unsightly piece of furniture, but also become a practical bedside table.

6. Console



From durable wood and aluminum plates, you can build a reliable screen for a heating battery, which is also suitable for storing various small things and will become a functional part of the hallway.

7. Eco style



A modern light wood curtain screen not only disguises an old radiator, but also becomes a stylish detail. modern interior.

8. Shelf



A radiator screen built into a long, modern shelf is a practical solution that will hide an annoying object and provide additional storage space for various small items.

9. Modern solution



A bright screen made of perforated metal will help hide an ugly radiator and become a spectacular detail of a modern interior.

10. Textile



An elegant textile screen will perfectly fit into the interior of a classic living room and will allow you to get an additional shelf for placing indoor plants and small decorative items.

11. False fireplace



Cardboard or drywall can be used to create a charming false fireplace that will not only cover the radiator, but also become a cozy detail in a modern living room.

12. Sofa



A cozy sofa that can be built from drywall by the window above the radiator will help to disguise the old battery.

13. Stylish design



A decorative radiator box will kill two birds with one stone: hide the old battery and get a stylish shelf for decor items.

14. Folding table



A small folding table placed above the heating radiator will be an ingenious solution for owners of small apartments, because with its help it will be possible not only to hide an unsightly detail, but also to acquire a fairly spacious dining area.

15. Cabinet



A wonderful screen for the battery, made in the form of a stylish wooden pedestal, will fit into the interior of any modern space and remove an unsightly piece of furniture from your eyes.

16. One whole



A wonderful translucent screen connected to the head of the bed will help cover the radiator and get a charming bedside table.

17. Curtain



The original fabric curtain attached to the windowsill is the easiest and most affordable way to hide the heating radiator. In addition, such a "Screen" can be replaced with a new one at any time, simply by purchasing another fabric.

18. Storage system



An original and capacious storage system attached to the windowsill will allow you to hide the old battery and get a lot of boxes for storing all sorts of things.

Video bonus:

Continuing the theme that everyone will like.

The heating system is an important element of every apartment or house. Batteries keep the house warm during the cold season. Often, heating radiators are knocked out of the overall design of the room, spoiling its appearance. Then the question arises of how to close the radiators and pipes (photo), to give them a more attractive look.

Not only Soviet-style cast-iron batteries can ruin the aesthetics of a room. Modern heating radiators also break the elegant composition of the room. Covering the battery is necessary not only to improve appearance premises. It is capable of performing more practical function, for example, to protect children from sharp corners and burns that can occur when touching the heating elements. So how can you close unsightly heating radiators (pictured)?

Advice! Before finally choosing a way to decorate a radiator, you need to make sure that heat loss due to it will be minimal. Therefore, the radiator cover should be considered not only in terms of design.

Things to consider when choosing a battery cover method

Heating radiators provide space heating in two ways:

  1. Infrared radiation, transferring heat to objects in the room.
  2. Convection heating the air. Warm air rises and displaces cold air, providing air circulation in the room and equalizing the temperature throughout its area.

Before determining how to close the radiators and pipes (pictured), it is necessary to understand that any decorated element will lead to a decrease in heating power. The larger the area of ​​\u200b\u200bthe dense surface (without slots and holes) of the decorative element, the worse the room will heat up.

Attention! In terms of maximum heating efficiency, perfect option for a decorated surface, it is that it looks like a grid with large holes.

In addition, the cover must be designed so that at any time you can get access to the radiator and pipes. This is necessary if the battery leaks or flushing of its sections is required. Therefore, it is better to use a removable screen or a box with a special door that provides access to the pipe and radiator attachment point.

The most popular ways to decorate a radiator

If the question of the appearance of the heating radiator arose the day before overhaul, then you can simply choose the battery that is most suitable for the planned design. For example, if the room is decorated in a Victorian or Venetian style, then a massive cast-iron radiator will look very organic.

It is impossible to implement such an option if the repair has already been made or the replacement of heating elements is not expected in its process.

If the size and shape of the battery does not stand out from the general style of the room, then you can simply paint it to match the color of the walls. Radiators of bright contrasting color can become a highlight of a modern interior. In stores you can find special paint in various colors.

One of the most simple ways mask the radiator - install a screen on it. The hinged screen is put on over the battery, it does not need to be mounted. The main disadvantage is that it hides only the radiator itself, the pipes remain in sight. Such screens are most often made of metal, they are inexpensive.

The method of disguising the battery and pipes largely depends on the style of the interior of the room. For example, for a Japanese-style interior, you can hide the heating pipe in a bamboo trunk. To do this, the tree trunk is sawn in length, and then they wrap the pipe around it and fix it. In a country-style room, the pipe can be wrapped with a thick, beautiful rope with a pronounced texture. If the radiator is in a niche under the windowsill, then you can cover it with a small curtain sewn with my own hands. Such a cover will successfully fit into the interior in the style of Provence or country, will give the room a homely feel.

If the battery is built into a niche, then you can hide it with a flat screen with a pattern, thread, or simply in the form of a lattice.

How to hide heating radiators without involving specialists? You can independently make a wooden screen-box that will cover the radiator from all sides. It can decorate the interior of the room, especially if the upper part of the box is turned into a stand or a small table for a vase, figurines, paintings. Closed top part the box will reduce the efficiency of the heating element. In addition, natural wood, although it looks expensive and beautiful, can shrink when temperatures change. Ready-made boxes made of MDF panels are more practical and cheaper in this regard.

The battery box can be integrated into the window sill or shelves. It will turn out a one-piece construction of an unusual and stylish design. If the battery is located at a distance from the wall, then decorative box can be connected to the windowsill and make a bench. You can see how to hide heating batteries in this way in the photo below.

One of the cheapest ways to decorate a battery is to cover it up. plastic grid. This option may be suitable for a bathroom, but not for living quarters, since plastic can release harmful substances when heated.

You can beautifully fit into any interior glass screen. It is a thick glass plate, which is attached to the wall with steel holders. The screen covers only the front of the radiator, leaving the top, bottom and sides open for free passage. warm air inside the room. The surface of the glass can be made mirror, often photo printing is applied to it.

Preparing to create a drywall box

With the help of drywall, you can easily and quickly hide the heating radiator. Not everyone knows how to close the battery with drywall with their own hands. To do this, you must have minimal skills in repair and construction work and follow the instructions.

To make a drywall box, you will need the following:

  • measuring tools: corner, tape measure, ruler;
  • marker (pencil);
  • heat-resistant drywall (thickness 12 mm.);
  • liquid nails, dowels, screws (for fasteners);
  • level;
  • metal profiles of two sizes (27x28 and 60x27);
  • screwdriver, pliers, puncher, screwdriver;
  • serpyanka (construction self-adhesive mesh).
  • Before you hide the radiators (pictured), you need to choose which installation method the marking will be carried out for:
  • a box, when only the radiator itself is covered and 15-20 cm of space outside it;
  • a wall, when the entire wall with a battery is covered with drywall, or a hole between the window sill and the floor, if the battery is located under the window.

The second method requires the use of more materials.

Markup drawing and frame manufacturing

To begin with, markings are drawn on the wall around the perimeter of the radiator. It should be borne in mind that the edges of the box must protrude beyond the battery by at least 10 cm. Otherwise, the front surface cannot be closed with a removable screen.

If the structure rests on the floor, then 3 lines are drawn on the wall - one above the radiator and two on the sides. If the box hangs, then another line is drawn under the battery.

After the drawing, a frame of metal profiles is installed according to the following scheme:

  1. The profile (27x28) is attached to the marking line, marks are left on the wall with a screwdriver (with a distance of 15-25 cm).
  2. Holes for fasteners are made with a perforator.
  3. Dowels are inserted into the recesses.
  4. The profile is applied to the wall and attached with screws.

This is how all the elements of the metal frame are attached. After its installation, jumpers from the 60x27 profile are installed. A fully finished crate must be strong. If it staggers, then additional transverse elements are added.

The next step is cutting drywall with a clerical knife. To do this, a sheet of material is applied to the crate and markings are made on it. The cut cardboard cover is screwed to the frame with self-tapping screws (3-4 pieces per meter). The main thing is that the screws do not break the sheathing material.

The final part of the work is finishing. With the help of a sickle mesh and putty, the seams between the parts of the drywall are sealed. The fastening is also carried out. Then the whole structure is processed with putty. After complete drying, the surface of the box is leveled with sandpaper, then it is painted to match the color of the walls or covered with wallpaper.

It is not recommended to completely cover the battery with drywall: this way you can lose a large number of the heat it generates. You can drill many holes in the drywall surface, but dust will clog in them, and the whole box will not look very aesthetically pleasing. It is better to hide the front of the radiator with a removable screen.

To date, the building materials market has a lot of boxes and screens designed to decorate heating radiators, among which you can choose the option that is ideal for the interior of the room. You can design a box with your own hands. Finishing the battery with drywall is one of the easiest and cheapest options.

When wondering how to close the heating battery with your own hands, you need to take care not only of the decorative side of the issue, but also of practicality. No matter how beautifully and stylishly decorated the heating radiator is, if it does not fulfill its main function (heating the air in the room), it simply does not make sense.

Beautifully fitted into new interior a heating radiator is a rarity. Batteries, especially old, cast iron ones, stand out sharply against the background of fresh wallpaper and look ridiculous in a room if its design is not made in retro style. Think about how and what to close heating batteries, it is necessary even at the planning stage of the repair, and not after its completion, when some work can no longer be carried out.

Installation of new radiators

Owners of apartments in houses of old construction are most often faced with the fact that installed in the rooms cast iron batteries. For efficient heat transfer, such a device is better. However, during the years of operation in the days of the USSR, in conditions of a shortage of materials of any kind, the only manipulations that were carried out on radiators were painting. Turning a monster covered in many layers of peeling paint into something decent is extremely difficult. In addition, cast-iron radiators do not have ball valves that allow you to turn off the heating batteries if it is hot in the apartment.

The easiest way to replace the radiator on the modern model and install immediately stop valves, which can reduce the temperature in the room and turn off the water for repairs.

For the operation of the new radiator to be effective, during installation it is necessary accurately calculate place of attachment:

  • It is necessary to place the heating battery strictly in the middle of the window opening.
  • The distance from the floor to the lower edge of the battery should be within the range of 8–14 cm.
  • The radiator should hang below the window sill by 10–12 cm.
  • gap between wall and back wall should not be less than 3 and more than 5 cm.

If these rules are observed, the heat transfer will be maximum.

Heat in the apartment

Complaints about the heat in the apartment quite rare. Usually the temperature of the radiators is controlled by shut-off valves, but they are not always installed. Therefore, if you need to reduce the heat transfer of the battery without taps, then this can be done in several ways:

  • A budget option is to cover the battery with a thick cloth or blanket. This method allows you to solve the problem of "overheating" here and now, until a special screen for the radiator is purchased.
  • Another "quick" option to reduce the temperature is to cover the battery with a shield from a tabletop or board.
  • A more expensive option is reflective insulation. As a rule, this is foil on a foamed polyethylene foam substrate, which is covered or wrapped around sections of a too hot radiator.
  • If you want it to be not only cool, but also beautiful, the battery must be packed in a box made of wood, metal or drywall. The construction of the box will require not only financial costs, but also time.

If the room is cold

More often than not, people complain that Not enough heat from radiators to warm up the room. To make the batteries warmer in the apartment, you can also use reflective thermal insulation, only in this case you need to mount it on the wall behind the battery and on the floor below it. Other methods are more complicated:

  • It is desirable to install on the battery Mayevsky's crane, which allows you to release the air accumulated during the start of the heating season and when filling the radiator with water.
  • Thorough cleaning of dust and dirt will improve heat distribution. It is necessary to clean not only on the outer and upper sides of the radiator, but also in the space between the sections.
  • In the battery itself, in addition to air, accumulate dirt and rust. To clean the batteries, you need to call the master.

Ways to mask radiators

If the temperature in the apartment is completely satisfied, and only the appearance of the batteries worries, then you can use one of the decor methods. The main thing is not to harm the heat transfer process and observe several important points:

  • The radiator may require repair or replacement, so you need to consider decorative design so that the battery can be easily removed in the event of an accident. Plumbers who regularly encounter problems with heating devices generally recommend using only attached screens that simply move to the side.
  • The main threat from the radiator is a possible leak at the junction with the heating pipes. Therefore, the second important nuance- accessibility of connection nodes, which can be ensured by providing a plastic door in box designs.

With wallpaper

Typical heating radiators are painted in White color and look good only against the background of white walls. If the walls are dark in color, but without a pattern, the radiators can simply be repainted. Only heat-resistant paint can be used.

Drawing on the walls complicates the task. Using a stencil and paint, it's easy to duplicate a simple pattern on a battery. If the pattern is complex, you can cut pieces from the remnants of the wallpaper that match the size of the sections and stick them on the radiator.

A special way to decorate the battery is decoupage. Handicraft stores sell vinyl stickers that do not deform under the influence of temperature. For decoupage, you can use not only ready-made patterns, but also create your own from improvised materials: fabric, paper, hot melt adhesive, and even beads.

Fabric Screen

Women with good sewing skills often make their own covers for radiators made of fabric.

An alternative way to decorate is to create a special curtain for the battery. They are made of loose fabric and attached to the wall or window sill with textile Velcro. Most often, a fabric screen is made from the same material as the curtains.

The undoubted plus of such screens: minimal impact for heat dissipation and elementary care - the curtain for the battery that has collected all the dust is effortlessly cleaned during washing in a conventional washing machine.

Mounted and attached structures

For lovers ready-made solutions construction and furniture stores offer screens from various materials. The variety of choices allows you to choose a design that fits perfectly into any interior. The most popular screens made of metal and wood:

  • Metal decorative screens are made of stainless steel. Chrome-plated designs fit well into a stylish high-tech interior. The main advantage of metal decor is high thermal conductivity, easy maintenance and wear resistance.
  • Wooden screens are suitable for interiors in American or scandinavian style. Most often, wooden screens are made in the form of a large-mesh grid, which does not interfere with the normal convection of the battery.
  • The screen made of decorative glass looks very elegant, and the design itself acquires airy lightness. But the decor with solid glass reduces heat transfer by almost half, more effective method- use a screen of several glass panels.
  • Plasterboard screens are also very common because you can make them yourself. It must be remembered that the thermal conductivity of drywall is very low, and the material itself begins to collapse under the influence of high temperatures. Therefore, it is better to choose fire-resistant drywall and treat the sheets with a primer or PVA glue.

Camouflage boxes

More difficult to execute decor option- a box covering the radiator from all sides.

Most often, boxes are made from the following materials:

  • Heat resistant drywall - inexpensive material, which at the finishing stage is painted, pasted over with wallpaper or film, decorated decorative elements and even stucco.
  • MDF panels are also inexpensive and successfully imitate rare wood species. Panels are selected to match the color of the main furniture.
  • Plywood, like drywall, is very often used for self-manufacturing boxes, and at the final stage it is decorated with various materials.
  • Wood is used as a material for the box due to its high environmental friendliness, but it is more expensive and difficult to process.
  • Plastic, although it is used as part of the box design, is not very popular. When heated, plastic elements can emit toxic fumes.

The box is often made not in the form of a simple box, but as interior items: an imitation of a fireplace, a false wall or a section of a cabinet built under the window.

Concealed battery mounting

One of the most difficult decorating methods is to hide the radiators as if they were not installed:

  • Installation of pipes and batteries in the wall radically solves the problem of the appearance of heating devices. At the same time, thermal conductivity invariably suffers, and in the event of a leak or breakdown of the radiator, the wall will have to be broken.
  • In the bathroom and kitchen, you can successfully close the heating elements with furniture. In the bathroom, cabinets are most often used; in small-sized kitchens, the window sill is replaced with a countertop, and false cabinets with lattice doors are installed under it.

radical method

You can completely abandon the batteries, replacing them with alternative heating systems:

  • Warm floor. Electric and infrared floors are most often installed in apartments, and in a cottage it can be water system. The point here is not efficiency, but the fact that it is impossible to obtain permission to install a water floor in an apartment. The disadvantages of underfloor heating include:
    • a large number of building materials that need to be purchased and installed - pipes, pump, mixing unit.
    • Heat transfer losses due to floor coverings(carpets) and furniture.
    • High accident rate of the system: laminate (or parquet) laid on top of a warm floor can catch fire, the water system, like conventional batteries, has a risk of leakage.
    • Difficult-to-regulate heating temperature.
  • Film heaters. They belong to infrared heat devices and work due to the flow of electricity through resistive elements, the heat from which is transferred to the aluminum screen. Film heaters are good because they can be mounted for decoration in any part of the room: floor, ceiling or walls, or stylized as a picture, for example. The advantages include durability (up to 50 years of operation), the absence of combustion products, noiselessness, ease of installation and low weight of the structure. Among negative traits This method of heating should be noted that it is effective only in rooms with good thermal insulation, it requires a high power supply, and its operating costs are higher than those of gas equipment.