Floor air conditioner for warm air. Floor air conditioner for home and apartment. Main parts of the device

Installation of a stationary air conditioner is not always possible. In this case, you should switch your attention and study the floor air conditioner.

Some experts are skeptical about such coolers, but if you choose and operate the device correctly, it will work efficiently, silently and not create any problems.

There is a huge range of floor air conditioners of various modifications on sale, but only 2 subspecies of this climate technology can be attributed to floor mechanisms: split systems and mobile equipment.

Split system features

The design of the split system includes 2 separate units - an evaporator and a condenser. The first is always inside the room, and the second is outside. The connecting elements for them are electrical wires and tubes, through two of which freon circulates, and through the third condensate is discharged.

In the condenser, the refrigerant changes from a gaseous state to a liquid state, and in the internal (evaporator) freon changes from a liquid state to a gaseous state. The outdoor unit includes a compressor. Its task is to keep the refrigerant moving along the circuit by compressing it.

Before supplying to the evaporator, the freon pressure is reduced by means of a thermostatic valve. To make the heat exchange more intense, both in the outdoor and in indoor unit and built-in fans. The air flows created by them blow over the condenser and evaporator.

The main elements of a split system are: compressor (1)‚ switching valve (2)‚ automation (3)‚ axial fan (4)‚ condenser (5)‚ copper tubes for freon‚ centrifugal fan (7)‚ evaporator (8)‚ filters (9‚ 10)

This includes floor and ceiling air conditioners. They can be equipped with an indoor unit for both ceiling and floor mounting. Their main advantage is the rapid cooling of the air. Air masses are distributed evenly over the blown plane and do not create drafts.

Compare which is better: a split system or an air conditioner, will help, dedicated to the analysis of the pros and cons of both types of climate equipment.

Floor air conditioner without duct

Unlike stationary split systems and floor air conditioners with air duct, mobile climate control equipment can be easily moved anywhere. By purchasing such equipment, it can be operated where it is needed at the moment - in a city apartment, in an office, outside the city in a country house.

To ensure a comfortable microclimate ‚ not equipped with an air duct, simply plug it into the socket. It is a monoblock in which all the equipment‚ including the compressor‚ is located in the room. The principle of its operation is based on evaporation.

The air is cooled by the absorption of heat by water during the transformation of its liquid phase into a gaseous one. The human body works on the same principle in heat conditions - the skin cools down when sweat evaporates.

Do for real mobile system There are no air ducts for cooling, so you can install it anywhere. It is significantly cheaper than a split system - by 30 percent

This type of air cooler has a porous filter and a special reservoir filled with water. The fan sends a stream of air to the filter, which has absorbed water, and the moisture evaporates with the absorption of heat, as a result of which the air is cooled.

The initial humidity in the room directly affects the cooling efficiency - the lower it is, the more intense the liquid evaporates from the filter, therefore, the heat is absorbed more strongly. The moisture evaporated by the unit remains in the room, therefore, periodic ventilation is necessary, otherwise, even if the temperature drops, there will be no feeling of freshness in the air.

This feature of it is the main disadvantage of a mobile air conditioner. Consumes a maximum of 85 watts of equipment. Works effectively on a small area - up to 25 m².

Floor air conditioner with air duct

The unit with and without air duct is a compact mobile design. Both of them take air from the room, purify it by passing it through a special filter.

In the case of using a mobile outdoor air conditioner with an air duct, heated air is discharged outside through the window or holes specially provided for this

The ducted equipment is reminiscent of the old window system, only mounted on wheels and having a more elegant look. It works on freon, while only water is needed to operate the device without an air duct.

If there is no air duct, the air conditioner is immediately connected to the power supply, and if it is present, care must be taken to bring the corrugations out.

Advantages of a mobile air conditioner

A mobile air conditioner is positively evaluated from the following points of view:

1. Smooth cooling mode with gradual normalization of humidity. It is almost impossible to catch a cold in such conditions.
2. Ease of control by means of a remote control for some models or a panel with buttons located on the case.
3. Environmental friendliness - only water is used as a refrigerant.
4. Moderate noise during operation.
5. Light weight.
6. Ease of change of dislocation due to the presence of wheels.
7. An extensive range of instruments equipped with additional functions.

Some air conditioners are used as a heater‚ ionizer. There are units with the ability to work as a fan. Some models are equipped with ice containers, which reduces the time required to lower the temperature.

Elements included in the design of a floor air conditioner. For the mechanism to work effectively, it must be operated in a room in which there is a well-functioning ventilation system - natural or forced

Opponents of the use of mobile floor air coolers argue that these units cannot be called air conditioners, because Evaporation is identified not with conditioning, but with the effect of humidification.

Nevertheless, the equipment, when used correctly, does an excellent job of maintaining the temperature in the room from 23 to 25⁰ and a comfortable level of humidity.

To do this, it is necessary to periodically replace the heated water in a special compartment with cold water. If the design of the model provides a place for ice, then within half an hour the temperature in the room will decrease by an average of 5⁰.

Image Gallery

Portable air conditioners are designed for operational air processing in a limited space, they are local climatic equipment

Most of the models of floor air conditioners currently produced are capable of operating both for cooling air and for heating.

Due to the lack of an air duct, the device can move freely with the user to where he is. However, the same circumstance deprives the owners of the opportunity to receive fresh air, purified and treated with air conditioning.

The ZACM-07 MP-III / N1 model automatically maintains the temperature selected by the user, thanks to the function of maintaining the set settings, the unit does not need to be reconfigured each time before switching on. For creating comfortable temperature at night there is a special mode of operation. The monoblock is equipped with a motion sensor, a timer and a breakdown self-diagnosis device.

At overall dimensions 35.4×69.8×34 cm air conditioner weighs only 20 kg. For towing, the body is equipped with wheels. This model works quietly, the noise level is only 46 dB.

Image Gallery

A small air conditioner takes up a minimum of usable space. Easily moves to the desired room if necessary

Monoblock Zanussi ACM-07 MP-III/N1 only cools and dehumidifies the air. The functionality of this model does not provide for the possibility of heating and humidification.

The direction, volume and strength of the air flow is manually adjusted using the blinds located on the front panel

The electronic panel as well as the remote control are illuminated at night

Floor air conditioner made in Italy

Functions of mobile climate control equipment

Blinds for adjusting the air supply

Ultimately simple panel management

Model #3: Symphony Personal Coolers Ice Cube

A wide range of Symphony air coolers (USA) allows you to choose a unit with any cooling capacity. Symphony Personal Coolers Ice Cube is designed for areas up to 18 m². It consumes 80 W and has dimensions of 30.5 x 45 x 65.3 cm and weighs 6.5 kg. The tank holds 16 liters of water. Air circulation rate - 1400 mᶾ / h.

If it is necessary to maintain optimal microclimatic conditions in the room, a floor air conditioner without an air duct for the home can be an excellent replacement for similar stationary devices. Especially in those rooms where it is impossible or undesirable to install climate equipment on the walls. For example, in a rented premises or in a building of historical value, on the facade of which it would be inappropriate to look outdoor unit conventional air conditioner. When choosing such mobile equipment, you should know that it is a compromise option - if it is possible to use stationary models, they are preferred.

Read in the article:

Floor air conditioner for home: classification

There are three main types of mobile air conditioning units:

• the most efficient device mobile ducted air conditioner;
• a more convenient, but less efficient option - air conditioner without duct;
• floor and ceiling appliances, which are no longer completely mobile, but can be reinstalled to a new location faster and easier than stationary options.

Each of three types have their own characteristics. You should pay attention to them before buying floor air conditioners for the home (prices, reviews will be presented below), choosing the option that is suitable for its capabilities and efficiency.

Models with air duct

Use of a floor-mounted portable air conditioner with the possibility of taking air from the room. In this case, the air flow is divided into 2 parts:

• the first is sent through the evaporator, cooled and returned to the serviced room;
• the second leads to cooling of the condenser, heating up during this process and being led out through the air duct.

The presence of a second channel for the intake of outside air allows not only to cool the room, but also to ensure its ventilation. The latter possibility makes this type of equipment almost as effective as stationary options. However, its advantages are also disadvantages - both one air duct and two limit the possibility of installing the device with the length of a corrugated hose and the need for an outlet from the room.

Equipment without air duct

Considering how a mobile floor air conditioner works without a duct, there are more possibilities for moving it. Moreover, each of these devices is equipped with rollers, thanks to which it can be transported to any place in the room. Including at points far enough from the outer walls. The principle of operation of mobile air conditioners without a channel for the output of heated air to the outside is based on the absorption of heat from environment. The process occurs due to the evaporation of liquid from a special filter through which air flows are driven.

Among the advantages that distinguish floor air conditioners without an air duct, it is worth noting:

• relatively simple principle of operation;
• lack of communications in the equipment design;
• quick installation.

The disadvantages of floor air conditioners for an apartment without an air duct include low efficiency. They can only be used in rooms up to 25 square meters. m. And the room served by such an air conditioner needs to be constantly ventilated. Therefore, it is worth buying mobile floor air conditioners without an air duct only if there is a supply and exhaust system in the premises.

Floor-to-ceiling air conditioners

Another type of equipment, a floor-to-ceiling air conditioner, is used less frequently than others. In fact, it is an analogue of a standard wall unit. Although it has a number of differences:

• Mounting versatility. If necessary, the air conditioner is installed almost anywhere, and the air flows are directed in the right direction.
• Dimensions of mobile split systems. Due to the compact dimensions of the indoor and outdoor units of such equipment, it is easy to install it even in a small room.
• Great performance- it practically does not concede to indicators of the stationary equipment.

Among the tasks of such a stationary floor air conditioner, which you can also buy for installation on the ceiling, is not only cooling the air, but also cleaning the air streams from impurities, and even their ionization. This creates a relatively low noise level - for most ceiling models, its value does not exceed 30–35 dB, with standards even for night time of 40 dB. And the air direction can change depending on the installation method: for floor mounting - up and to the sides, for ceiling mounting - in all directions in a horizontal plane.

However, such a mini floor air conditioner has a number of disadvantages. These include the presence of outdoor and indoor units, each of which has one air duct and outlet. The distance between them does not make it possible to move the elements away from each other for a long distance. In addition, it is periodically required to remove condensate from the device.

Other types of classification

When choosing a mobile or floor-to-ceiling air conditioner, which you can buy in the same places where stationary systems are sold, you should pay attention to the following parameters:

1. Performance. For effective cooling of each square meter of area, 100 W of power is enough. And, therefore, for an average room of 15-20 square meters. m, a 2-kilowatt model is enough, and for an office measuring 5 x 8 m - a 4-kilowatt device.
2. The maximum possible distance from the installation site to the window, where the corrugation for the floor air conditioner will be displayed. You can buy it separately from the device, but usually a hose of a certain length is already included in the kit.
3. Method for removing condensate. Some models are equipped with an automatic evaporation system, others require manual removal of the liquid.

Equipment is also divided by size and weight. Although this parameter is not very different from different models. All of them are small enough to quickly move to a new place using rollers and transport in the trunk of a car.

Floor air conditioner for home without duct: brands and models

Before you buy a floor air conditioner for a house without an air duct, you should choose suitable model. And due to the fact that the range of such equipment on the modern market is quite large, in addition to the main characteristics, you should also pay attention to the manufacturer. And consider a few popular models domestic and foreign brands.

Bork floor air conditioner model

When choosing mobile air conditioners Bork (Russia), you can pay attention to such a model as Y502, which can serve up to 32 sq. m area. The maximum power of the equipment for cooling is 2.6 kW, and the noise level does not exceed 50 W, almost reaching the ceiling equipment.

Ballu mobile air conditioner

The power of another domestic device, Balu BPHS-12H floor air conditioner, is 3.5 kW, which allows servicing up to 30 sq. m area. The model will provide for such a room a four-fold air exchange - enough for both residential and office premises.

Floor air conditioner brand Electrolux

Swedish product, mobile air conditioner Electrolux EACM-14 EZ / N3, despite the absence of an air duct, does an excellent job of cooling, ventilation, and dehumidification. Due to the possibility of removing water vapor together with the outside air, the device does not need to remove condensate. And in order to avoid high humidity the device is completed drainage pump. The performance of the air conditioner is enough to maintain comfortable conditions in rooms up to 35 square meters. m.

Floor air conditioner from Zanussi

The Zanussi ZACM-09 DV/H/A16/N1 mobile air conditioner, made in Italy, includes both cooling and heating of the serviced area. And among the features of the device can be called the automatic resumption of work in the same mode when the power supply is turned off.

Mobile air conditioners brand Bimatek

Buying Bimatek floor air conditioners will allow you to get at your disposal a device of the required power without causing serious damage to your budget. So, the Bimatek AM310 model costing about $250 is quite suitable for rooms up to 20 square meters. m. The power of this equipment reaches 2.3 kW, and the magnitude of the generated noise does not exceed 53 dB.

Floor air conditioner from Beko

Choosing a modern mobile air conditioner Veko BLKNE-12C, the user significantly saves his money, getting powerful equipment at a bargain price. However, the optimal ratio of price and performance is accompanied by high noise from the operation of the device. Level sound load reaches 65 dB.

Panasonic floor standing air conditioners

The high quality equipment of the Panasonic brand increases the demand for models of this brand. However, today there is not a single Panasonic air conditioner on the market without an air duct. However, there are quite a few floor and ceiling devices in the brand's assortment, such as the S-F34DTE5/U-B34DBE8. The performance of the model, which can also be classified as mobile, is enough to cool the air on the territory of an entire full-length four-room apartment or a large office.

Delonghi: floor air conditioner from Italy

The features of the Delonghi PAC N81 mobile air conditioner include a minimum noise level - no more than 50 dB. The performance of the device is enough to cool the air in a room of 27 square meters. m. And among the operating modes there are standard options - ventilation, dehumidification and cooling.

Mitsubishi floor air conditioners

The Mitsubishi Electric PFFY-P20VLRMM-E air conditioner model does a good job of cooling rooms up to 25 sq. m. The power of the device is 2.2 kW. Its advantages include convenient control using the remote control and the information screen.

Floor air conditioner Alaska

AT model range brand "Alaska" you can find equipment designed for several dozen square meters area. Thus, the floor air conditioner MAC 14010 creates a cold flow in the premises of three- or four-room apartments, offices and shopping centers(up to 105 sq. m). The minimum temperature to which the device can cool the air is 16 degrees.

Where is the best place to buy a mobile air conditioner

In the hardware sector, where you can find a floor standing portable air conditioner, prices are in the range of $250-1000, depending on performance and quality. It is most profitable to buy these devices on the Internet by finding the appropriate site. Even taking into account the delivery, the price of a mobile air conditioner for the home will be more profitable than purchasing equipment in most conventional hardware stores. Moreover, on some aggregator sites, such as Price.ru, information is sorted by popularity and other parameters. And on most resources you can get acquainted with the current prices of floor air conditioners for the home and reviews left by buyers.

The average cost of the most popular mobile devices on the market is:

• domestic models for rooms up to 20 sq. m - from 10 thousand rubles;
• products of Russian brands Ballu and Bork for 25–30 sq. m - from 15 to 20 thousand rubles;
• European-made air conditioners, designed for 20–25 sq. m - about 20 thousand rubles;
• equipment of foreign brands for premises with an area of ​​30–35 sq. m - up to 30 thousand rubles.

Most often, users choose equipment with the maximum level of mobility - which does not require installation near windows and easily moves across the floor on special rollers. And to be guided when choosing a mobile air conditioner without an air duct is reviews, prices and demand. If the capabilities of the equipment are not enough, you should pay attention to devices with output to the outside. Choosing and buying a floor air conditioner in an online store can be inexpensive as easy as other models. Moreover, the range of models with air ducts is as large as in other categories.

Mobile air conditioner: reviews, pros and cons

Mobile air conditioning equipment has the following advantages:

• ability to move to another location. Although such mobility can be called relative - most air conditioners of this type still require certain work to be done to rearrange the device - it just takes less time;
• lack of communications equipment for drainage and freon circulation;
• minimum installation time, which is especially important for newly renovated premises.

As you can see from the floor reviews left on mobile air conditioners, another plus from its use is the lack of approvals for installation. This may be especially important for rented premises. Floor-to-ceiling models do not have this advantage.

Equipment disadvantages include loud noise and relatively low power. Because of this, the user of a portable floor air conditioner without an air duct, reviews of which confirm this minus, takes several days to get used to the noisy operation of the device. And some models also need to be cleaned of condensate manually.

By analyzing the reviews, a floor air conditioner for a home without an air duct or with an outlet to the outside can make your choice faster and easier. For ease of searching suitable option user opinions are collected in a small table. Here are the models and brands most often bought in the territory of the Russian Federation for home use.

Table 1. Reviews of mobile air conditioners

Installing a floor air conditioner: features and principles

Each mobile air conditioner, the installation of which requires some action from the user (some just need to be put on the floor and plugged into the network), preferably taking into account the following recommendations:

• hot air should be removed through a specially equipped opening. Bringing the corrugation out without installing seals will make the device ineffective;
• the device is installed so as not to block the access of air to the air intakes;
• floor systems must be in a vertical position. Only floor-to-ceiling type air conditioners are allowed to be installed horizontally.

Another nuance that the owner of a mobile air conditioner needs to know about is the requirements for its inclusion in the network. The equipment should be put into operation not earlier than two hours after installation. And before that, be sure to make sure that there is grounding in. For mobile air conditioners without an air duct, reviews and prices of which can be found on the same aggregator sites, installation is not required. However, this does not eliminate the need to check .

Preparing for installation

Before you install a floor air conditioner in an apartment, you need to decide on its location. If the device has an air duct and will always be in one place, the output for the corrugation crashes into the window block. If the air conditioner will move around the apartment, it is best to arrange temporary conclusions - for example, through a window or a raised window sash. Despite the decrease in efficiency, this option will increase the mobility of the device.

Before installing a permanent outlet to the street, you must perform the following steps:

1. Prepare a plastic sheet with a thickness of at least 1 cm, which will act as a barrier between the room and the outside air. Sometimes such an element is already included with the air conditioner.
2. Find the right tools - a hacksaw, glass cutter, construction tape, sealant or foam.

In addition, before installing and connecting the equipment, it is worth measuring the distances from the air conditioner to the window. Standard hoses can be between 1-3 m long, and separately purchased corrugations reach 10 m, although the cooling efficiency drops noticeably.

Installation of air conditioners

When making an insert for the duct outlet, most often a square hole is made in the glass. It is unlikely that it will be possible to make it round - this requires both a certain experience and a special tool - a glass cutter or an electric chisel. Before cutting a hole, mark its outline on the glass. Then cut out the desired piece and grind the cut point with a sandpaper and a mounting knife. The next stages of installation of a mobile floor air conditioner include gluing the frame and fixing it with metal corners. Now you can attach a corrugation to the resulting structure and use the device to cool the room.

Installing a floor-to-ceiling air conditioner should be done differently. Due to the fact that the mobile split system consists of two blocks, one of its elements is installed outside the room, the second - at the bottom of the wall or on the ceiling inside the cooled room. Mounts for the outside of the floor-to-ceiling type air conditioner are selected to withstand the effects of precipitation and the weight of snow. The installation location of the indoor unit is determined by the length of the hose connecting both elements. In general, the installation of a stationary floor air conditioner will take about the same time as the installation of stationary models.

The principle of operation and the main problems

The principle of operation of the device is based on the same principles as the operation of any:

1. The refrigerant enters the evaporator, heats up and, due to the intake of warm air from the room, evaporates.
2. The refrigerant vapor enters the compressor, from where it enters the condenser under pressure and again passes into the liquid phase.
3. The heated air from the air conditioner enters the cooled room.
4. Liquefied freon or other refrigerant enters the evaporator again.

Article

Air conditioning has long ceased to be a curiosity, today it is used to create an optimal level of comfort. However, sometimes owners of apartments and houses are faced with the fact that it is not possible to install this equipment, this can happen for several reasons. But don't give up on comfort. You can purchase a mobile air conditioner, the pros and cons of which will be discussed in the article.

Key Features

Which is installed on the floor, according to users, is the best and most profitable solution to a number of problems. Sometimes such a device is required, but the installation of a stationary version is undesirable or impossible. This may be relevant for rented premises. Among other things, problems with the installation of stationary equipment may arise if the building is of historical value. This is true, and when the room is your own. Sometimes the authorities interfere with the work with the external appearance of the facade of the building, including the installation of external components of the air conditioning system.

A mobile air conditioner, the pros and cons of which are recommended to be considered before purchasing equipment, is a compromise option. The advantages of such devices are present, but they are few and lie in the fact that the equipment can be used in places where it is not possible to install full-fledged air conditioners.

Main advantages

If you are thinking about whether to install a mobile air conditioner, then you need to familiarize yourself with the positive aspects of these devices in more detail. According to consumers, they are mobility, ease of installation, as well as the lack of communications. However, it is worth remembering that mobility is relative. It would be more correct to call such devices conditionally or relatively mobile. After acquiring such a unit, simply put it on the floor, turn it on and start enjoying the coolness will not work. You will have to perform certain preparatory work, but they are expressed in a smaller volume compared to what you have to do when installing a conventional air conditioner.

Additional Benefits

A mobile air conditioner, the pros and cons of which we describe, does not involve complex work, which is especially liked by customers. This is suitable for those premises where renovations have only recently been carried out. Among other things, for the circulation of freon and further drainage of drainage, there is no need for the presence of communications. After the purchase, you do not need to coordinate the installation.

Main disadvantages

Some consumers believe that the few advantages cannot compensate for the disadvantages of mobile air conditioners. Among the shortcomings, one can single out a high level of noise, large heat losses during operation, as well as a decrease in free space in the premises.

It is worth mentioning that the mechanics are located in the room, and the main part of any air conditioner is the compressor. It compresses the refrigerant, taking away the heat that comes from the air. The compressor creates a high level of noise, which is why this neighborhood is unlikely to add comfort.

Any mechanic will generate heat during operation, and the mechanical component of mobile air conditioners is no exception. It turns out that the device works against itself, it heats the air, which it will have to cool.

If you decide to purchase a mobile air conditioner, all the pros and cons of this technique are definitely recommended to be considered. Some consumers believe that the disadvantages are a continuation of the advantages. In the case of the described equipment, the absence of drainage for condensate removal can be distinguished. Condensation is present in this case, but where does it go? A mobile air conditioner (pros and cons, reviews of which are recommended to read) does not work against the laws of physics. Condensate will flow into a special container, which is located at the bottom of the device, from there the liquid will have to be periodically removed on its own, this feature cannot be called convenient.

Additional cons

A mobile air conditioner, all the pros and cons of which are described in the article, also has an additional number of negative characteristics, which are expressed in heat losses when the system is heating. The unit is supplied with an air duct through which hot air, together with heat, will be removed from the room to the outside.

Despite the presence of a heat-insulating layer, the duct, as noted in the reviews, will remain hot, which will cause the air inside the room to heat up when operating in cooling mode, and the air conditioner must deal with this. The described device takes air directly from the room. This indicates that the same air will be constantly driven through the cooling system, which, of course, will negatively affect its physical properties.

The last minus can be called something that will reduce free space the premises of the apartment, this is especially critical for rooms of a small area.

The above features are true, first of all, for monoblocks. The two main working elements of such an air conditioning system are the condenser and the evaporator. They are interconnected like radiators through which the refrigerant circulates. In the evaporator, the compressed refrigerant passes into a gaseous state, it receives heat from the air, while in the condenser everything happens the other way around - heat is given off to the air. In mobile air conditioners, which are designed as a monoblock, these systems are combined into a housing that is located in the room.

Description of split systems

If you are interested in mobile air conditioners (pros and cons, how to choose - we consider all this), you should familiarize yourself with all their types. In a wide variety of such devices, there are mobile split systems, which consist of two blocks. One of them is external, while the second is internal.

If you are deciding how to choose, then you should know that split systems do not have the disadvantages of the devices of the variety described above, but they have a significant disadvantage, which is expressed in high cost. A mobile split system is less efficient than a traditional air conditioner in terms of price. Even if you take into account self-installation, the gain in performance is obvious, but especially difficult cases are exceptions.

Did you know about the existence of such a type as a floor air conditioner without for the home? It can be an excellent solution for creating a comfortable indoor environment. When choosing equipment, any person will not interfere with knowledge of the rules of operation and the nuances of the characteristics of individual models. We will tell you how to choose the right device that will take up little space and bring great benefits. Also from our review you will learn about the features of such structures, their pros and cons. So, let's start with an overview of the main parameters of mobile equipment.

Read in the article

Floor air conditioner for a house without an air duct: characteristics and types

Floor structures look like boxes on wheels. On the facade there are special blinds through which flows of cold air pass. Floor and mobile products are presented in an extensive range.

Models from Delonghi have a functional design. They are popular with buyers who get a whole range of functions for affordable price. In a short period of time, the room warms up or cools down. At the same time, it does not a large number of noise. Also in the design there is a mode. All devices have a self-diagnosis option. Some models have a display. And thanks to a special condensate recirculation mechanism, you can not worry about draining the water.

How to choose Mitsubishi floor air conditioner

For mobile movement, the Mitsubishi brand offers electric models. They are not very different from two-component designs. The air conditioner cools the air remarkably, and also has built-in modes that allow you to restart the equipment. minus mobile device is noisy work.

The Mitsubishi electric model provides a smooth redistribution of air masses. The streams go up and then move throughout the room. The device of the indoor unit allows you to disguise the device in the wall. The model has some nuances:

• timer;
• no noise during operation;
• automatic restart; air flow filtration; self-diagnosis.

Choosing a floor air conditioner Alaska

Models of the Korean brand Alaska are produced on European equipment. The designs of this company have universal design, economical consumption of electricity, as well as a choice for any budget.

Air conditioners perfectly support the necessary temperature regime. For production high efficiency leaves a small amount of electricity. To useful features It is worth mentioning the operating modes for daytime and nighttime, the on-timer and dehumidification.

Prices of mobile air conditioners for the home

Let's look at the prices of underfloor air conditioners for the home. The cost is influenced by the set of functions, the performance of the device and the quality of the material.

Before you buy mobile floor air conditioners without an air duct, look at the price table.

A photo	Models	Characteristics	price, rub.
	Ballu BPAC 07CM	Mobile monoblock with cooling mode. There is a ventilation option	11000
	Honeywell CS 10 XE	The device is completely environmentally friendly. Optimal feature set. Power consumption in any of the modes is not more than 100 watts.	24600
	Bimatek AM 310	Designed for an area of ​​​​about 20 square meters. m. Cooling mode.	22000
	Electrolux EASM-14	Works for cooling. In the presence of a control panel, air drying mode and a fan.	25500
	Zanussi Zacm-09 DV/H/A16/N1	Not only cooling, but also heating is provided. Controlled from the remote control.	19000
	Delonghi PAC N 80	Class A energy consumption. Dehumidification and ventilation function available. A condensate recirculation mechanism is provided.	20000

Carefully study the characteristics and nuances of the equipment before purchasing. Also look at what price you can buy a corrugation for a floor air conditioner.

How to choose mobile air conditioners without an air duct: reviews of the advantages and disadvantages

Before buying, go through the main parameters of choosing a model. Find out what area the products are suitable for. It is better if in the design, in addition to cooling and ventilation, there is also air drying and heating. Not bad if there is an ionizer inside the device. The mechanism is mounted inside the filter for air purification. The central control panel is most often located on the case. Power and performance are considered important selection criteria.

They will help you choose the design of a floor air conditioner for a house without an air duct, reviews.

Review, model Ballu BPAC 07 CM

Maksimova Veronika, 29 years old, Krasnodar:“I bought the device last year. Looks neat and build quality. You can also work as a fan, but it makes a lot of noise. Doesn't cool much. There are problems with the removal of hot air.

Feedback, Bimatek AM 310

Nosova Ekaterina, 32 years old, Perm:“Very functional device. Does its job wonderfully. For it to work properly, it must be installed correctly. In the heat, it cools down to 20 degrees in 2 hours. A good value for your money."

Feedback, Electrolux Power EACM-14 HP/N3

Novoselov Ivan, 42 years old, Samara:“Cools the room well. Adjustable vertically and horizontally. A bit heavy for a mobile device. I'm happy with my purchase as it's worth the money spent."

Review, Delonghi PAC N 80

Sanova Tamara, 45 years old, Novokuznetsk:“I bought the device in Eldorado. I liked the fluid movement system, and the brand inspires confidence. Works not noisy. Used for a three-room apartment. With it, you can quickly cool any room. I think that the model is in no way inferior to split systems.

Installing a floor air conditioner in an apartment: installation features

An important point is the repair of floor air conditioners and their correct installation. Companies that offer such services must provide a special permit.

Information on how to install a floor air conditioner in an apartment will also come in handy. Helpful Tips will help you do this:

• before installing a floor-to-ceiling air conditioner, find out the capabilities of your electrical network in order to prevent its overload;
• install a socket with a built-in RCD, which will allow you to use the design without additional machines;
• if the ceiling height is less than 2.8 meters, then for every 10 sq. m. you need 1 kW for cooling, but if the ceilings are high, then another 10% must be added to this value;
• choose more powerful designs, as they can be adjusted to the desired value;
• closed structures are placed in a corner, on or on. This will provide protection from getting under the air currents. If the products are open, then they are even installed on the floor.

The installation of a mobile air conditioner must be carried out in compliance with safety requirements. Maintenance of equipment is also carried out according to certain regulations. First you need to inspect the product and check it for the operability of the electrical power supply. Diagnostics of the functioning of the equipment is carried out and a sequential check of all mechanisms is carried out.

In some cases, it becomes necessary to use a corrugation for a floor air conditioner.

Instead of a "normal" wall-mounted air conditioner with an outdoor unit, you can purchase a floor standing mobile air conditioner. This technique does not require drilling walls, installation costs. If necessary, you can independently move it around the apartment, or take it with you to the country house or to any other place.

The device and principle of operation of the floor air conditioner.

Structurally, the outdoor mobile air conditioner is a rectangular monoblock on 4 wheels. Case height - about 65-70 cm, weight - about 25-30 kg. Works from the socket. Case material - plastic or metal. Some models have handles on the top panel or on the sides.

Inside the case are:

1. Electric motor.
2. Fan.
3. Water pump (required to saturate the filter on models without air duct).
4. Filter (stands in front of the air intake from the room).
5. Tray (for draining condensate, located under the body).
6. Compressor.
7. Capacitor.
8. Evaporator.

On the front of the case, there are openings on top through which cooled air enters the room. They can be covered with movable blinds, which can manually change the direction of the flow. Some models have the function of changing the direction from the control panel.

The control panel (mechanical or touch, depending on the model) is usually located on the top panel. It may contain the following elements:

1. On-off button.
2. Select the temperature that the air conditioner will automatically maintain.
3. Mode selection (if the model has several of them).
4. Turning on / off additional functions (if any - heating, dehumidification, air ionization).
5. Tray liquid level indicator.

In addition to the panel, some models have a remote control remote control.

Air is taken in through holes in the back wall corps. For some models, a flexible air duct can be connected to the rear wall, which is brought out into the street (for fresh air intake).

DIFFERENCE OF MODELS WITH AND WITHOUT DUCT

According to the device and principle of operation, mobile air conditioners for the home are divided into 2 types:

• with air duct;
• without air duct.

Models with an air duct are mobile only conditionally. A corrugated air duct is led from the rear panel of the device to the window (usually to the window). Therefore, you can move the device around the room as long as the corrugation allows. To move it to another room, the air duct will have to be disconnected and reconnected in another room.

Instead of a window, the air duct can lead to a ventilation shaft or through a hole in the wall to the street. This connection method is less convenient, since the air conditioner cannot be quickly transferred.

Mobile air conditioners without an air duct have a slight difference in the device. Inside the case there is an additional filter - a sponge soaked in water. Passing through the wet filter, the air flow is cooled.

For cold water a special tank and a water pump are installed in the lower part of the body. The liquid in the container must be periodically topped up. You can also fill the tank with ice.

Models without an air duct are more economical, since only the fan consumes electricity. But they cool the air worse, and in hot weather, for continuous operation, they require a daily change of water (which quickly heats up in the tank).

ADVANTAGES AND DISADVANTAGES

From the advantages:

Mobility.

The device, if necessary, can be moved around the room or moved to another room. Air conditioners without an air duct can be moved without additional installation work. Models with air ducts - in the new room you will have to reconnect to the window.

Ease of installation.

You don't need permission to install. Outdoor units of "ordinary" air conditioners are forbidden to be hung on the facades of some historic houses. In some cases, their installation may not be possible for other reasons.

To install a mobile air conditioner, you do not need to drill the wall, mount the outdoor unit on the street and hang the indoor unit on the wall. If the model does not have an air duct, you can simply bring it from the store and immediately turn it on.

Of the minuses:

1. Periodically it is necessary to drain the condensate from the pan.
2. The device can be effectively used only in small (up to 30-40 m2) rooms.
3. The device "takes" free space inside the room (critical for a small area).
4. A working air conditioner makes an average noise of about 45-50 dB. For comparison: split systems are noisy at a level of about 35-40 dB.
5. The air duct (if any) looks ugly in any interior.
6. Compared to a split system, mobile air conditioners have lower efficiency. The reason is that a running compressor heats the air in the room.

WHERE TO USE FLOOR AIR CONDITIONERS?

Outdoor portable air conditioners can be used for any residential and non-residential premises with clean air.

It is important to choose them if it is not possible to hang wall split system or you need to move the device from room to room. For example - not to buy 2 wall-mounted air conditioners for 2 rooms, or when you need to buy an air conditioner for a rented apartment.

The only limitation is the floor space. It is not recommended to use such a technique for an area larger than 35-40 m 2.

WHAT CHARACTERISTICS TO PAY ATTENTION TO WHEN SELECTING

When choosing a floor air conditioner for an apartment, you need to pay attention to the following parameters:

Noise level.

On average, this technique creates noise at a level of about 45-50 dB (the more powerful, the louder). This characteristic should be paid attention to if the device will be in the bedroom, nursery, or in the room where the elderly or the sick are.

Power.

Depends on the area of ​​the room and on the initial temperature. The conditional formula is that for every 10 m 2 of area, approximately 1 kW of power is needed (with a ceiling height of up to 2.3 m). More accurate characteristics by area are indicated in the passport for each model.

Energy efficiency class.

To save on electricity - you need to choose a model of class A and above.

Device (with or without air duct).

An air conditioner for a home without an air duct requires only plugging into an outlet and turning it on to start. For a model with an air duct, you will have to stretch the corrugation to the window.

Hull size.

Actual if you want to install the device in a limited free space (for example, between a cabinet and an armchair). Weight, the presence of handles and wheels - if the device has to be moved frequently.

Additional functions.

Dehumidification, ionization or heating of air. Each additional option increases the cost of the equipment. The dehumidification function is useful for coastal regions where the climate is more humid. Heating - useful for all regions, for winter and off-season.

The direction of the air flow and the possibility of its regulation.

It is important to pay attention if the device will stand in front of a bed, sofa, workplace - so that it is possible to direct the flow not to a person.

Control method.

Is there a remote control in the kit, or is the device controlled only from the panel on the case.

Condensate tank capacity.

If the capacity is small, during continuous operation in hot weather, the water will have to be drained every 3-5 hours.

BRANDS AND MODELS

Rulers floor models There are such manufacturers of apartment air conditioners:

• Electrolux;
• Zanussi;
• Bork;
• Timberk;
• Bimatek;
• beco;
• Delongh;
• scarlett;
• Ballu.

Consider several models with prices and main characteristics:

Ballu BPAC-08(about 15 thousand rubles).

Case height - 69.5 cm, mechanical control panel, with an air duct, there are 2 directions of air flow, cold performance - 2.1 kW.

Bimatek AM403(about 18 thousand).

Height - 63.5 cm, mechanical control panel with display, with air duct, there are 3 airflow directions, noise level 59 dB, cooling capacity - 2.4 kW.

Bork Y502(about 34 thousand).

Height - 54 cm, touch control with remote control, with an air duct, there are 3 directions of air flow, there is a timer, cold performance - 2.6 kW.

Delonghi PAC WE128(about 35 thousand).

Case height - 91 cm, mechanical control panel with display, with air duct, with dehumidification mode, there is a timer and night mode, cold performance - 3.2 kW.

Electrolux EACM-10 EW(about 20 thousand).

Height - 80 cm, mechanical control panel with display, there is a remote control, with an air duct, with dehumidification and ionization mode, there is a timer, cold performance - 2.9 kW.

To summarize: the average price of a model without additional functions and a remote control, which is suitable for an area up to 20-25 m 2, is about 20-25 thousand rubles.

© 2010-2020 All rights reserved.
The materials presented on the site are for informational purposes only and cannot be used as guidance documents.