Porch 

Hangers for clothes do-it-yourself folding drawing. Do-it-yourself floor clothes hanger: materials, job description. Wooden hanger

One way to make a house come alive is to fill it with original things. Even a simple furniture accessory, like a do-it-yourself hallway hanger, as shown in the photo selection, can become a real decoration.

Gotta stock up necessary tools: drill, self-tapping screws, Phillips screwdriver, 2-3 drills, hacksaw, tape measure, fitting (devices for cutting boards with different bevel angles), level. To give a finished and neat look, you will need a skin with large and small grains, varnish, stain or paint.

From materials for a hanger with your own hands you will need:

  • so that the clothes do not fall along with the hanger, you need to make a stable, heavy base. Suitable thick wooden blocks 60-70 cm long, or metal parts. You can take a support from an old artificial Christmas tree; an old weighty floor lamp is ideal;
  • you will have to choose a suitable size column, in stores building materials wooden components are offered, figuratively processed on lathe. The most economical option is the straight trunk of a young tree, which should be dry by the time of use. The bark is removed from it, the skin is processed. Its height should not exceed 200 mm;
  • a set of hooks, the number should correspond to the estimated number of clothes on the hanger;
  • glue, for fixing self-tapping screws and additional fastening of parts (carpentry or other transparent glue);
  • so that the hanger does not slip on the floor, and also to align the points of contact with the floor (so that it does not stagger, to put it simply), rubber is glued to the bottom surface of the base (thickness from 1 to 5 mm);
  • to increase the center of gravity of the hanger, you can attach a small shelf in the form of a frame made of massive board, mounted on a support on metal corners, and used as a shelf for bags or gloves.
floor hanger drawing
Wall hanger drawing

Creating the bottom

Having prepared all of the above, you can get to work - start creating a hanger in the hallway with your own hands. First you need to do the cross. The prepared bars are sawn in half (each hanger support must have a swing of at least 30-35 cm), processed with sandpaper, connected at a right angle. For tight connection on the parts of the cross, you should choose recesses along the width of the bar with a chisel, combine the selected areas, they will be tightly, motionless connected (see photo). Now, with the help of a fitting, 4 bars are cut out, which will actually serve as a support for the trunk of the hanger, they must be screwed with screws to the legs, as well as to the trunk.

Beam for the base of the hanger
Future hanger legs

Before screwing in a self-tapping screw, you should drill a hole with a drill, this will save the product from small cracks, which can significantly reduce its service life. The diameter of the drill should be smaller than that of the self-tapping screw. The holes made must be filled with glue for strength, and only then screw in the self-tapping screw.


Side support details Legs are screwed to the base of the hanger
To install the side support, carpentry glue is used, as well as a gun, or a hammer with nails.

Rubber is glued to the legs of the hanger, after gluing the product should not swing or slide - you will have to try.

Creating the top

Now you can go to the top of the hanger, place the hooks. You should not attach them directly to the trunk, it is better to attach a small square with pre-screwed hooks on top. There is another option: 4 bars, combined with corners, sawn with a fitting, are attached to the trunk, slightly stepping back from the top. A hole is drilled under each self-tapping screw and filled with glue, this is the rule for an object that will be subjected to solid loads.

Now the product is finished, you can do it appearance. Taking sandpaper, you need to walk along the surfaces. It is better to sheathe the cross with boards, cover it with a cloth - close the rough design. Wash the hanger, varnish it (or paint it and varnish it too - this will keep it looking fresh for a long time).


Hanger Top Decor
Decorating the top of the hanger

Hanger Top Decor

original variants

If there is a floor lamp in the house, then the work is reduced many times. It is necessary to remove electrical equipment from it, clean and paint (metal spray paints will give an excellent effect). For hooks, you can make several holes with a drill for metal, thread steel hooks (S-shaped) into them. If you have some metalworking skills, bend them from steel wire and weave them.

You can also use a real tree (well dried, of course). Completely remove the bark, sand. The roots will serve as a stand, also cleaned and properly filed. Branches should be left only strong, located close to the trunk - the crown should not go beyond the support. Such a hanger in the hallway will become a real pearl of the interior, created by yourself. However, one must prepare for a long search for a suitable specimen, and then for a long and very careful processing.

Combined variant

uncomplicated and interesting option, on the basis of which you can get a variety of wall hangers in the hallway. The set of tools is given in the previous description, and the materials are as follows:

  • bars;
  • two strong boards for attaching to the wall;
  • a board with sufficient width for a shelf;
  • metal furniture corners;
  • slats (instead of them it is better to take platbands, choosing to taste, they will only have to be washed or painted and varnished);
  • hooks.

It is better to take lumber processed, this will significantly speed up the process of assembling the product. It is extremely easy to make this hanger in the hallway, boards are attached to the wall, above and below. The length of these fasteners depends on the length planned for the hanger and must correspond to the length of the shelves (you need to think over the dimensions of the new furniture accessory in advance).

Laths are installed on these boards, with a small distance between them. Check the vertical position with a level. Shelves for shoes are assembled below, bars are used for this. The shelves are on the floor, which will later allow you to safely sit on them to change shoes. It is necessary to strengthen all joints with corners, check the strength and fidelity of the lines.

A rough construction of bars can be sheathed with slats, this will give the product a neat and finished look. Then the top shelf is installed, it should be fastened at the level of the top mounting board. Self-tapping screws must be included in the support, that is, their length must be equal to the sum of the thickness of the rail and the mounting board. Beautiful wrought-iron corners are suitable for this shelf, which will become an aesthetic addition to a new piece of furniture. The final chord is screwing the hooks, and then staining and varnishing, or painting.

The design of this hanger can be modified, for example, to expand it with additional rails and attach a mirror or additional shelves.

How to properly attach a mirror

If the mirror is without a frame, a solid plywood shield is screwed onto the rails, its dimensions may be somewhat smaller than the mirror. The mirror is glued with mirror glue, in addition, you need to stick two strips of double-sided tape on it to fix it until the glue sets. As an additional support for the mirror, you can install a narrow shelf directly under it. If this design does not seem reliable, you can attach it using special fasteners.

Another option is a frame, like for a photo. It is made from a textured board, carefully sanded and varnished, or from a platband.

Thus, it is possible to summarize the basic manufacturing principles wall hangers in the hallway, and vary them as you wish. Reiki can be replaced with a solid shield, which can not only be painted, but also pasted over (leather, fabric, use decoupage techniques). A little imagination, and an absolutely original, unique work will appear in the hallway.

hinged model

You can combine the functions of a hanger in the hallway and a small spacious locker by developing a product based on a photo with several (1-3) fairly deep shelves and hooks for clothes, thus obtaining wall accessories.

To do this, all with the same already named set of tools, you need to prepare a few strong boards good quality, with processing. Boards from old furniture- after all, the tree retains its strength for many years, and the furniture parts are also of high quality.

Having thought over the size and number of shelves, you can get to work. The photo with the drawings shows exactly how and in what order the assembly takes place. After cutting the boards to the desired size, you can begin the assembly by attaching the side panels to the bottom shelf. Boards are attached to the back side of the sidewalls, the number depends on their width. Their height can be calculated based on how many shelves are planned, what height they will be.

Bearing in mind that the hanger must withstand not only an indefinite amount of clothes, but also everything that will be placed on these shelves, it is imperative to use furniture corners, strengthen the structure, without being afraid to overdo it.

How to screw correctly is described above, and in this hanger model, the reliability of all fasteners is especially relevant. Boards are screwed to the base, which will become shelves, and another strong plank to the bottom of the frame, which will not allow things to fall out. Hooks are screwed onto it (after painting, varnishing and other finishing work).

How to hang

The design is fastened with reliable screws directly to the wall. As an option - attach 2-4 ears for padlocks, and hang the product on them (solid fasteners are screwed into the wall on the dowels). The ears are made of alloy steel, and by carefully attaching them to the hanger, you can be calm, it will not fall soon.

creative ideas

In fact, by starting to look at things from the point of view of their additional unconventional functionality, you can easily make both floor and wall hangers from anything, literally from what is lying around idle and gathering dust in pantries.

Having processed a branch picked up in the forest, you can fix it on the wall, and equip it with half a dozen hooks and use it as a hanger. A set of sticks with branches attached to a shelf can also serve as a hanger in the hallway, and hangers can be used. Old cutlery can also be turned into stylish hooks. Worth a try, there is nothing more exciting than creating a comfortable space around yourself with your own hands at no great expense.

According to the great director, the theater begins with a hanger. But is it just theater?

It is difficult to imagine any house - whether it is a cozy apartment or a spacious cottage - without this integral attribute of our life.

Hanger-rack on the floor, hooks on the wall in the hallway, coat hangers in the closet… They have one role: to keep our belongings in a tidy condition.

However, people with a rich imagination are able to turn this boring piece of furniture almost into a work of art. A simple set of tools for work, patience and a couple of non-standard ideas - and you are the owner of a unique thing.

Hanger as part of the interior

The main thing in any home is a spacious closet. Blouses and dresses, trousers and skirts, gloves and scarves, coats and raincoats coexist in it.

A good hostess has every thing in its place. The clothes in the closet are different. And hangers for her, too, should be different.

How to make a hanger with your own hands? Believe me, it's easy and even fun. Dig into a chest full of long-forgotten grandma's dresses. You will find amazing things there.

Antique hangers (so-called trempels) can be restored, and they will turn into the main decoration of your wardrobe.

In the old days, clothes hangers were made of wood. Using one of the decor techniques, you can give an old thing new life. And what a life… You will want to hang such beauty on the wall, and not in the closet – and let everyone admire it.

You can transform a clothes hanger with the help of decoupage, unusual coloring or appliqué.

The soft shoulder pads are very comfortable to use. Things on them keep their shape and do not slip off. You need to wrap ordinary trempels with thin foam rubber, and then sheathe them with a pretty fabric. Beads and ribbons will give the new little thing a special charm.

But to decorate your house with a wooden hanger own production more difficult. Woodwork requires special skill. And special tools are needed here.

Wooden wall hanger

Wall hanger - the design is simple. However, its manufacture should be approached with all seriousness - then it will serve you for a long time.

The main guarantee of success is strong, dry wood without cracks. A piece of timber or a board is perfect. The length of the workpiece depends on the length of the future hanger. Before starting work, it would be nice to treat the wood with an antiseptic.

Panel mounts are placed on the board in one, two or three rows as desired.


Such a hanger is the place behind the door in the bedroom, as well as in the bathroom, pantry or bath.

Accuracy is brought up from childhood. Furnish your child's room with a simple hanger. And if it is decorated with images of favorite cartoon characters, the child will be happy to look after his clothes.

Note!

Do not mount the hanger directly on a plastered wall. Otherwise, you risk "whitewashing" your clothes. Yes, and a jacket or raincoat, soaked in the rain, will leave ugly spots on the surface of the wall. To avoid this, you need to attach a sheet of plywood, thick paper or polyethylene under the hanger.

Panels for hooks can be given any shape - waves, ovals, hearts, suns, etc.

Attention! The use of untreated wood is fraught with a large number of splinters. Don't forget to polish the hanger panel.

As fasteners, use empty spools of thread or ready-made hooks of any shape.
And if you turn on creativity, dried twigs or plant roots will be used. Cut them, remove the bark, sand, varnish - here you have the hooks. You won't find these in the store for sure.

A simple wall hanger can be made from ordinary wooden planks. Nail them to the wall in parallel - this is the basis for fastenings, and the protection of clothes from whitewashing, and interior decoration.

Note!

Of course, you can’t make such a hanger in half an hour. But the end result of your labors will be a real hanger. It remains only to attach a shelf for storing hats at the top.

Do-it-yourself hanger in the hallway

A good hallway hanger should be durable, beautiful, and at the same time as roomy as possible. In the limited space of the hallway, objects should fit outerwear, shoes and numerous accessories.

This should not be forgotten when designing a hanger. There should be enough compartments and shelves at the hanger in the hallway to accommodate everything you need.

Attention! When marking out, consider the dimensions of the wall on which you will place the hanger.

For a standard apartment, a hanger of this size is quite suitable: the width is about 1 meter, the height is slightly more than head level. Fasteners for clothes are placed on the panel in 2-3 rows.

Note!

At the top of the hanger you need a shelf for hats. Structural strength will give straps.

They are attached to the sides of the structure, connecting the shelf to the panel at an angle of 45 degrees. It is best to fix the hanger on the wall with dowels.

Do-it-yourself wardrobe hanger

Making a hanger with your own hands is very simple. There are many ways to make such hangers. You will need: coarse wire, a cut of a branch of a suitable shape, small plastic bottles put on a wire base, a metal bar or plate bent at the right angle.

Wrap the base of the coat hanger with thin foam rubber or other similar material. Then choose a fabric that matches the color and sheathe the base. Add charm to the resulting cute little thing with ribbons, beads or lace.

If the hanger is designed for a baby, decorate it with a funny muzzle or appliqué. Pick up a hook - and hang in the closet.

Floor hanger rack

You can solve the problem of placing clothes in spacious rooms with the help of floor hangers-racks. Floor hangers are commonly used in the reception areas of various institutions.

These interior items are made of metal pipes. A floor hanger is a universal thing. You can place almost everything on it. Except, of course, shoes.

The disadvantage of a pipe hanger is its instability. If things are not evenly placed on it, it may fall.

But the floor hanger can always be rearranged to the right place or even hidden in the pantry.

In residential areas, this type of hanger is rarely used: it takes up a lot of space and is dangerous for children. Nevertheless, it is quite possible to make a floor hanger-rack yourself. The material is usually used:

  • for support - artificial spruce cross, couplings plastic pipes, the swivel mechanism of a broken swivel chair;
  • for a rack - trimming plastic or metal pipes, a trunk of a small tree, a shovel handle, a tripod from a camera, a “leg” of a floor lamp and other suitable details.

Attention! The main thing in a floor hanger is its stability.

Unusual homemade hangers

The hanger can be made from absolutely any material or object. Sounds incredible? Don't believe?

See for yourself:

  • Pieces of steel wire, tube or angle are great for the job. Welding can be used to connect parts. And if the metal is flexible and soft enough, just bend it with your hands. The choice of form is up to you.
  • The design of plastic pipes will appeal to fans of high-tech style.
  • If you love working with wood, this idea is for you. From the remains of wood of any thickness, you can make a practical and multifunctional hanger for the hallway.
  • The simplest hanger can be twisted from wire. Attach clips to the edges of the resulting hanger - now you have a handy little thing for placing skirts and trousers. Experiment with the shape of the hanger - this can be the highlight of your product.
  • The idea of ​​a “hunting” life is the good old deer or elk antlers. Attached to a suitable base, can become a wall or floor hanger.
  • It's no secret that many of us (especially men) prefer an ordinary chair to a spacious closet.

Often shirts, jackets and even trousers are hung on the back of a chair. Why not turn the back of the chair into an original hanger for those same shirts and jackets? On this design, the entire suit will easily fit.

Homemade hangers in the form of rings are quite suitable for storing belts, belts, ties.

Hanger as home decoration

Before you start making or decorating hangers, think about what style prevails in the interior of your room or hallway. After all, a new thing should fit perfectly into an existing interior. Here are some examples:

  • Soft trempels, covered with linen or knitted fabric in bright colors, will perfectly fit into the decor of a country-style bedroom.
  • Bright hangers with a "doll" design are suitable for a teenage girl's room in the style of Barbie.
  • Luxurious, with twisted elements, the hanger will decorate the boudoir in oriental or palace style.
  • Hanger made of wood with carved patterns will emphasize strict style office or hallway in a classic style.
  • Antique, artificially aged or skillfully restored coat hangers will add a special charm to a retro-style room.
  • In the bedroom of a glamorous lady, a hanger decorated with rhinestones, beads, bows and other shiny little things will look harmonious.
  • structures made of metal or plastic parts, simple and unpretentious in form will decorate the room in techno or high-tech style.
  • Simple in form, concise in design, hangers will complement the interior of a minimalist.

DIY hanger photo

The entryway is the first thing guests see when they enter your home. Therefore, it makes sense to decorate the walls of the hallway in a non-standard and interesting way, thereby forming the first unforgettable impression. Original wall hangers in the hallway are an important and integral element of the interior. There is always something to hang on hooks: outerwear, bags, umbrellas and other accessories. A few design ideas will help you move away from traditional solutions and transform the hallway!

Wall hanger in the hallway: types and features

The hanger in the hallway is a simple and extremely useful design in the interior. If in a small hallway there is no way to place a cabinet or a wall, then the wall hanger will become optimal solution, allowing you to store things and save usable space.

In the traditional version, a wall hanger is a bar on which hooks or pins are located. But even so simple design designers are constantly improving, changing, supplementing with new features and surprising with a completely unusual design. Often, the classic model of the hanger is made more spacious, equipped with additional recesses for small accessories and keys, trays for things, slots for correspondence and shelves for hats, movable elements are mounted, instead of a standard rectangular hanger, they give the hanger a curved, figured or stylized shape. Many models of wall hangers are hinged mini-hallways that are attached to the wall.


The wall hanger in the hallway can also be made in the form of separate hooks located on the wall in a certain or chaotic manner. This option is even more compact and flexible, which allows you to arrange a hanger even in a very limited area. The main difference and advantages of individual hooks is in the mobility of individual elements. After all, even a small wall hanger in the hallway can not always fit into the existing space. Modern designer hooks for outerwear are very popular and are used in the interior not only for functional purposes, but also for original decor, which emphasizes the style and uniqueness of the room. In hooks, great attention is paid to design - an unusual shape of hooks, non-standard materials manufacturing, bright colours and catchy decor. Such a hanger becomes the visual center of the hallway interior.


Types of fastening hangers and hooks

There are four main types of attachment:

  • classic with screws;
  • adhesive;
  • suckers;
  • magnetic.

The most reliable and common method of fastening is with screws. With this method of fixing, hangers and hooks can withstand a large load. For permanent use in the hallway, for heavy outerwear, it is better to choose this type of construction. Fixing hooks with suction cups or adhesive tape is suitable for use in the bathroom, kitchen or nursery, where the load on the hanger will be less than in the hallway. Hangers of these types require a smooth surface, for example, ceramic tiles, and the main advantage is that they do not spoil the wall. The magnetic method is used extremely rarely, since installation is a prerequisite metal surface in the hall.

Use in different interior styles

Wall hangers in the hallway and coat hooks are selected according to the style of the interior of the room. For a classic hallway, hangers made of wood or metal are suitable, preferably with a discreet design. In an interior dominated by calm pastel colors and natural materials, such wall hangers will look very organic, only emphasizing the classics.

In the interior modern styles you can safely experiment with the shape of wall hangers or hooks. Any brave design options favorably emphasize the relevance and originality of the interior. Stylized figurines, abstract shapes, non-standard designs - the brighter the design, the more unusual composition you can create.

Hangers from water pipes or wrench hooks.

A high-tech hallway can be decorated with futuristic metal structures.

Minimalism and Scandinavian style will withstand any design of hangers, but the main condition is their small size and the absence of unnecessary decorative details.

More photos of the original wall hangers and hooks for inspiration:


















Ideas for making clothes hangers with your own hands: photos and drawings of hangers for the hallway. A variety of options for making homemade clothes hangers.

You can make a clothes hanger with your own hands practically from improvised materials that are lying around at home idle. Craftsmen do not cease to amaze with their ingenuity, here is a clear example of this, a home-made clothes hanger from ordinary forks.

A similar version of a hanger made of metal spoons.

Pallet clothes hanger.

Here is a clothes hanger from a pallet, and again the old pallet was used. A wooden pallet is sawn into two parts from each half of the pallet, you can make a hanger, just paint the workpiece and attach hooks to the boards with screws.

Another option for a pallet hanger, here a whole wooden pallet, it is sanded with sandpaper, the boards are painted in different colors and attach hooks.

Wooden clothes hanger.

Such a hanger is more suitable for a summer house or a bathhouse; wooden knots fixed in a wooden structure are used as hooks here.

Hanger made of metal profile and bars.

The design consists of several bars and metal profiles fastened together.

Wooden hanger with your own hands.

Here a wide board with imitation of a piece of old wood is used, hooks for clothes are made of bars and fixed with screws screwed in from the back of the board.

The wood is burned with a blowtorch, which achieves the original texture of the product, the final stage is coating the hanger with a transparent varnish.

In this version, there was no carving work.

And in this design, instead of hooks for clothes, door handles are used, which can also be coated with paint.

An interesting option for hangers from boards.

Original homemade hanger in the form of a tree.

For manufacturing, thick plywood is used, the contour of the tree pattern is drawn and cut with an electric jigsaw. The design is painted and attached to the wall with dowels.

Hangers for children's clothes.

The details of the hanger are cut out of plywood with a jigsaw and painted with bright colors, so you can make a hanger in the form of animal figures.

Do-it-yourself outdoor clothes hanger.

The simplest version of a floor clothes hanger made of pipes, for manufacturing you will need a thin aluminum pipe 2–2.5 m long. The pipe must be bent, as shown in the figure, and the clothes hanger is ready.

Wall hanger made of pipes.

And this hanger consists of a picture on the wall, clothes hooks are attached with dowels directly to the wall.


A floor hanger is a mandatory attribute of any hallway room, whether it is an apartment or Vacation home. Its price depends on the originality of the execution and the quality of the materials. The easiest option is to purchase such a design at the nearest furniture store. But there is another way out of this situation, so as not to overpay - to make a floor clothes hanger with your own hands.

A little theory from the course of physics

To achieve this goal, you will need a little knowledge of physics, as well as improvised materials and tools. Let's start with the first one. The main requirements for a floor hanger are stability and the absence of sharp elements so as not to damage the floor, wall or clothes.

Sustainability is achieved in several ways. If the floor hanger rests on one base, usually in the form of a cross or a circle, then it is necessary to make sure that the center of gravity is as low as possible. This can be done using heavier materials - massive wooden bars or metal.

If the space of the hallway of the room allows, then it is advisable to install the hanger on two, and even better - on three points of support. In the first case, wide bases will be required so that your attribute does not fall on its side, since it is problematic to evenly place clothes. Therefore, if possible, you need to choose a support on three points.

So that the base of the floor hanger does not scratch the floor, you will need to use materials as a "sole" that will be softer than the floor covering.

Tools and materials

Required Tools

So, here is a list of tools that you will need to make a floor hanger:

  • cross (curly) screwdriver;
  • self-tapping screws of different lengths and thicknesses;
  • sandpaper;
  • drill;
  • drills (set);
  • hacksaw;
  • axe.

Set of self-tapping screws

You will also need to stock up on the following materials:

  • dried tree (cherry, sea buckthorn, etc.) or several of these, if the hanger is planned with several support points. You can buy ready-made processed blanks;
  • bars (more massive, at least 60 cm long, the optimal cut is 7x7 cm);
  • metal wire (for hooks) or ready-made decorative hooks;
  • wood glue;
  • a piece of rubber (or silicone) no more than 3 mm thick.

Wooden blocks for work

Instructions for making a floor hanger with a cross and hooks

First you need to free the trunk of the tree from the bark, as well as coarse knots. Of course, it may seem that with the bark the hanger will look much more natural, but over time it will crumble, and the garbage will spread throughout the living quarters. In addition, small insects can be found in the bark. Yes, and clothes will cling to bumps.

You can get rid of the bark with an ax or a massive knife. Once this task is completed, you will need to go through the rest of the sandpaper several times - first coarse, then fine. After sanding, the surface will become smooth, and the likelihood of catching clothing will be minimized.

The next task is to make the base. As in construction, only that structure will be stable and durable, which is given integrity. Therefore, the base and tripod of the hanger must be one.

The base and tripod of the hanger must be one piece

You should not first make a cross, and then attach the body of the hanger to it from above - such a design will loosen very quickly and may fall out of the base under the weight of the clothes.

Here's a rule to follow - the bottom edge of the tripod should be flush (that is, on the same plane) with the sole of the base.

We proceed to measure the diameter of the barrel. We need it in order to select a bar of the appropriate width. If the bars are wider, then you need to saw off with a hacksaw along to the desired size.

The standard height of the hanger is within 180-200 cm. For them, you need to make a cross with overhangs from 25 to 35 cm. Therefore, we need 2 bars 60 cm long, which we will cut exactly in the middle to get 4 blanks of 30 cm each.

Now the difficulties begin. Even if you contrive and attach these 4 bars to a round trunk, the structure will be unstable, and after the first fall, due to unevenly hung clothes, it will simply fall apart.

Therefore, we will proceed as follows: put the trunk on the floor and attach the resulting blanks to it from four sides. It will not work to connect them in this form, so we will make inserts in the form of triangular wooden elements on the bars exactly in that part of it where the body of the hanger is located. Such "triangles" are attached to the bars with self-tapping screws, and also to the tree trunk - in exactly the same way.

To strengthen the structure, in those places where the "triangles" will be attached to the bars-departures and to the trunk, you must first drill holes with a drill with a diameter of 2-3 mm. less than the diameter of the fastener.

If you just screw the screws into the tree, then there is a possibility of cracks that weaken the structure.

After this procedure is completed, it is required to fill the resulting drilled spaces with glue, and only after that start screwing in the screws.

The resulting design of the floor hanger cannot be ideal in terms of stability - often it rolls over from one cross bar to another. To correct this shortcoming, you need to use pieces of rubber that should be glued to the bottom.

In order for the rubber to adhere perfectly to the surface of the wood, it is necessary to go over the surface of the wood with sandpaper and make several scratches in different directions.

The frame is ready, now you need to give the hanger functionality - add hooks for outerwear, which can be remote, that is, located at some distance from the trunk. There is one rule here: the center of gravity of the hanging clothes should not go beyond the cross, otherwise the structure will be unstable and fall.

It does not matter which hooks are used - homemade or decorative, you cannot attach them directly to the trunk, since the floor hanger will quickly become unusable. You can proceed as follows: cut out a square from the existing bars, the length of the sides of which will be slightly larger than the diameter of the trunk used as the body of the hanger. Before attaching the "square" to the top, you must first attach the hooks to it.

Decorative ones are more suitable, since it is very difficult to achieve a beautiful shape from wire. Such hooks are attached to the tree, usually with one or two self-tapping screws.

If you have time and some skills in working with wood, then with the help of a chisel you can cut recesses in the squares attached to the top of the floor hanger in order to subsequently “drown” the base of the hook in them. This is a more aesthetic solution than just mounting on self-tapping screws.

After all the hooks are attached, you need to connect the square wooden element with top trunk. This can be done with one or two screws using the technology described above.

The final stage of work is to give aesthetics to the resulting floor hanger. First of all, you need to close the lower part - the cross with all the fasteners. For this, it is allowed to use fabric, rattan, wooden or plastic slats. The hanger itself can be painted with a protective layer of paint or varnish - both natural color and any other, depending on colors room finishing. The layer must be applied at least 2 times.

Making a suit hanger

The scheme of the floor hanger for a suit

The floor hanger for men's suits has a slightly different design and is made of wooden blocks.

You can do it according to the following algorithm:

  • measure and cut blanks according to a pre-made project;
  • carefully process and polish them;
  • make mounting holes in the right places;
  • assemble the hanger according to the diagram below;
  • perform finishing;
  • screw roller wheels to the base or glue rubber gaskets.