Choice 

Mini fireplace made of cardboard. How to make a decorative false fireplace with your own hands photo. False fireplace from cardboard boxes

Many people want to make the interior of their house or apartment original and impressive. Today on the Internet you can find a great variety of truly original and interesting ideas, ideas. Among them, far from the last decoration in popularity is a fireplace. However, not everyone has the opportunity to install a wood-burning stove with a chimney indoors. That is why how Alternative option, can be done decorative fireplace from boxes. A fireplace from boxes is one of the most budgetary and attractive solutions.

Yes, you can make a fireplace out of boxes with your own hands. This will require packages from various household appliances, electronics, which you can always find at hand at home. So how do you do it? Read on in the article!

Material selection

Before we make a fireplace, we need to pick up suitable materials to make such decorative design. In order to assemble a false fireplace with our own hands, we need to acquire:

  1. Boxes. They can be as many different shapes and sizes, or just one or a few large ones. Boxes can be not only different sizes, but also shapes;
  2. Wallpaper or plain paper. If you are going to use wallpaper to decorate the portal, one tube is enough for you;
  3. To glue boxes, wallpapers, paper together, you will need to buy an adhesive base - it can be silicate or PVA glue;
  4. Scotch tape (regular, masking and double-sided);
  5. Paint brushes, sponges and rags;
  6. For basic work, we need a clerical knife and a simple pencil. Additionally, you can get a ruler and scissors, a tape measure and a building level;
  7. If you are going to equip the fireplace portal with a shelf or countertop, you will need a sheet of drywall or plywood.

Also worth buying in advance. necessary materials for decorating a fireplace portal. It can be wallpaper that is printed imitating the classic brick surface of the fireplace. A cardboard fireplace can be decorated with a self-adhesive film, the surface of which imitates natural minerals such as marble, sandstone or granite. Classic volumetric patterns, represented by various columns, gypsum elements, skirting boards, foam plastic decor, look beautiful and stylish. Also, the surface can be painted with simple paint from a spray can or bucket.

If you want to get a rougher and more heterogeneous surface at the output, it is recommended to use liquid wallpaper, which has a corrugated structure and a rather heterogeneous surface. All kinds of acrylic compositions are very popular. This paint is practically odorless, dries quickly and has interesting shades and tones (gold, silver, bronze, sparkles, mother-of-pearl).

Introduction to varieties

A fireplace, the portal of which has an exclusively decorative function, may have more advanced functionality and a number of additional features. Such a false fireplace will be an excellent addition and decoration to the electric fireplace insert. Electric fireplace will become great alternative wood stove and can be installed even in an apartment.

Since cardboard and boxes are classified as flammable, it is not safe to install a biofireplace or a gas hearth in it. For the same reasons, it is strictly forbidden to install a fireplace with a water circuit.

The installation of such foci is impossible not only because of the strong heating of the body, but also because of the rather large mass. It is also not recommended to install open fireboxes and an electric fireplace with a heating function.

The best option is a modern electric fireplace with 3D effect of a burning flame and high-quality sound visualization, backlight.

You can make a fake fireplace with your own hands in one of the following styles:

  • Art Nouveau fireboxes belong to the category of modern fireplaces. The direction is distinguished by original shapes and sizes. It is possible to have and use contrasting shades, bright, catchy and cold tones;
  • A high-tech false fireplace will look stylish and original. To create the desired image, you can decorate the portal in one fairly calm and muted shade (black, gray, white, silver, metallic). Complete the look with a mirror or glass decor;
  • The classic style is always appropriate and will be relevant even in ten years. A classic fireplace is a wealth of patterns, ornaments, voluminous decor, and expensive decoration. It is fashionable to complement the frame with columns, candlesticks, shelves;
  • Rustic style or country motifs will make the fireplace and the atmosphere in the room as cozy and homely as possible. For finishing in this direction, natural and eco-friendly materials. However, for a false fireplace, you can use photo wallpapers with a pattern and texture of stone. You can decorate the combustion chamber with firewood.

Do-it-yourself step-by-step assembly

As it turned out, you can make a fireplace with your own hands quite quickly and on a budget. To do this, you will need to use the following step-by-step guide:

  1. First of all, decide on the room and the specific place in which the structures will be installed. A false fireplace can be island, corner or wall. The smallest are the corner portals. Also, with the help of a fireplace, you can hide some wall defects;
  2. Using building level, pre-apply all the necessary marks on the floor and walls and perform a control check;
  3. The quality of the pre-drawn drawing and sketch of the fireplace plays an important role. Make it as detailed as possible, indicate the dimensions and features of the firebox, the portal and each decorative element;
  4. Both several separate boxes glued together, and one large box from under the LCD TV can act as a base. For gluing together several boxes, double-sided tape is used;
  5. We remove excess decor and things that interfere with work from the room. We put on the box with a pencil the marks indicated in the drawing;
  6. The basis of any false fireplace is a podium, which is responsible for the stability of the structure. The podium must first be strengthened. To do this, its sidewalls are complemented by special cardboard inserts. The ribs must be installed in a perpendicular position to the podium and fixed with adhesive tape. Each edge has a height equal to the side of the pedestal. Also, the sidewalls of the pedestal can be reinforced with several layers of cardboard, which are fixed with adhesive tape. In order for the design to be as stable as possible. The podium is made wider and larger than the portal itself by 80-100 millimeters.

Do-it-yourself portal for a false fireplace

A fireplace in an apartment consisting of cardboard or boxes can be made as frame type, and have back wall. Fireplace instructions or step-by-step assembly guide:

  1. If you want to assemble a frame frame, you need to prepare cardboard, which will become the front of your fireplace. We make marks in the area where the focus will be located, and make an incision in the upper part. For this we need a clerical knife. It is also necessary to cut the central part of the portal. We make a bend of the cut sections, they will become the sides of the furnace compartment. A rectangular strip is cut out, the width of which will be equal to the sidewalls of the frame, and the length will be equal to the width of the furnace compartment. After that, we fix the ceiling part on adhesive tape and strengthen inner part frame panels, consisting of 2-3 layers of glued cardboard. The frame is installed and fixed on the podium with glue;
  2. A portal with a back wall is easier to implement. It can be formed from just one large box. Incisions are made in it, the upper and furnace parts are formed and bent. Next, the portal is installed and fixed on a pedestal.

You can add a false fireplace and make it more functional with the help of a mantelpiece. You can collect it from one sheet of drywall or plywood. Also, a fairly high-quality shelf is obtained by gluing 2-3 layers of cardboard together. Use double sided tape to secure the shelf to the frame.

Before proceeding with the facing of the portal, it is necessary to prepare the surface. To do this, the cardboard is pre-painted with water-based paint, acrylic from a spray can or puttied. This is necessary to obtain a uniform shade and get rid of contrasting spots. As an alternative, you can paste over the surface of the portal with several layers of white paper, the so-called papier mache.

For surface cladding, you can use photo wallpapers with imitation of brickwork, marble, granite. Favorably looks rough surface, formed by applying liquid wallpaper. You can simply paint the frame or apply a self-adhesive film.

The firebox is also made out at your discretion: firewood, garlands. Above the fireplace, you can place a mirror, clock, picture. On the shelf are various candlesticks, candles, figurines, photo frames.

Corner false fireplace

You can also make a corner raised fireplace with your own hands. To do this, you will need the following step-by-step guide:

  • We find the most advantageous angle for the location of the fireplace in a room with good visibility;
  • From one large box we make a podium. We cut the sidewalls and shape them in such a way that they ideally repeat the shape of the selected corner in the room. For fastening we use masking tape;
  • To strengthen the structure, we equip the sidewalls with stiffeners. To do this, on the sides we do small size with a utility knife. The optimal distance between the incisions is 10-15 centimeters. The marks will connect on the inside and bend the cardboard. Next, all excess and remnants of cardboard are removed, gluing is performed;
  • In the center of the portal, a size is made for the firebox. Recommended shape: square or rectangle. The top may have a slight rounding of the pores of the arch principle. The lower part is not cut off, but folded inwards forming a firebox. We fix it on masking tape, cut off all the excess;
  • The next step is to form the side walls of the portal. For this, two cardboard sheets are taken, the height and length of which is equal to the dimensions of the furnace compartment. Cut them into shape and fix them with masking tape. Top part the fireplace is also formed from one cardboard sheet;
  • We equip the fireplace mantel portal from two sheets of cardboard interconnected with PVA glue;
  • After the glue has dried well, we carry out the lining of the frame with the selected materials.

As an addition, you can burn decorative firewood for the fireplace with your own hands. To do this, take the cardboard and remove the first smooth layer into it. We determine the length and thickness of the logs so that they look harmoniously with the fireplace insert. To form firewood, it is necessary to cut off a strip that rolls up and can be supplemented with small knots. To form logs, after rolling, it is necessary to glue the edges of the workpiece well with PVA glue and additionally fix it with a thread. For small branches, it is enough to cut a small and very thin strip of cardboard, glue it, dry it and stick it to the main log. Next, the surface is painted with white paint and after drying, re-painted in a suitable color. For the manufacture of birch logs, the original color can be left white and after the paint has dried, apply a few strokes, stripes of black paint.

For coloring, you can use acrylic, oil or gouache.

Anyone can make such a decorative fireplace from cardboard boxes. At the same time, the design and design of a false portal can be very diverse. The advantages of a false fireplace made of boxes include mobility, light weight and environmental friendliness.

In this video, you will learn more about how to assemble a fireplace from boxes or cardboard for an apartment or a house with your own hands. The video shows a Christmas fireplace for the new year:

From childhood, after books about knights or Sherlock Holmes, the concept of "fireplace" for us has become synonymous with comfort and warmth. Those who live in their own home, with money and free space it is easy to call a team, choose a suitable fireplace and soon enjoy a living flame. But in high-rise buildings (and private houses, you know, are also different, in some you can’t even put an extra stool) you can’t adapt the necessary pipe in any way, and you won’t particularly allocate a place for a fireplace. So, in order to satisfy your craving for romance and the desire for comfort, it remains to make a cardboard fireplace with your own hands.

Layout selection

Start by deciding for yourself exactly where you would like to see your fireplace. Compared to the real one, the fake one has the advantage that it can be mounted anywhere and made into any shape. Do-it-yourself cardboard fireplace can be placed even in a corner that has nothing to force, but the fireplace will fit in harmoniously. Next, figure out what height and width your product will be. It should not conflict with the furniture in the room, should not suppress it, but it should not be allowed to get lost against the backdrop of, say, bulky cabinets.

Base selection

In principle, a do-it-yourself cardboard fireplace can be built only from this material. For the simplest, even a fairly large box from under furniture or office equipment is suitable. But keep in mind that cardboard is not a very durable material. If you want to get something more solid at the end, spend a little and order a chipboard frame for the base of the fireplace. Calculate how many sheets will be required for your dimensions, what size they should be. In principle, this will be the only part of the process of creating your fireplace that will require outside participation. But the “stove” will turn out to be more stable and strong.

The easiest option

The easiest way is to make a false fireplace out of cardboard using a packing box. To do this, all the joints of the box are glued so that the lid does not open and the walls do not fall off. The opening of your "furnace" is drawn with a pencil, then cut out with scissors. You can decorate the fireplace at your discretion. Most fast option- self-adhesive film with a brick pattern or wild stone. If you don’t like this method, let’s say you want to paint your cardboard fireplace differently, it’s better to paste over the box with white paper, and when the glue dries, apply the intended drawing. Even if you draw all the same bricks, they can be given a more realistic look, of course, if you have a penchant for drawing.

Paper wrapping is necessary, firstly, because the packaging cardboard is usually brown, and desired color you won't get. Secondly, there are always some inscriptions, emblems, etc. on the boxes. They can be seen even through several layers of paint. However, if you want, pasting can be replaced with a primer - you can buy it in stores selling goods for artists.

The inside is important too.

From the inside, it would also not hurt to paint or paste over the box, otherwise the fireplace made of cardboard, made with your own hands, will not look very believable. You can hang the inner wall with a dark cloth, and put bright red on the bottom.

For better stability, a “fireplace” should be placed on top of the box. For it, you can use chipboard or fiberboard, only processed or pasted over with the same self-adhesive wood or marble. If there is no suitable trimming at hand, you can glue several sheets of the same cardboard (for example, from another box). You will have a mantelpiece, however, it will not add structural stability.

Based on chipboard

If you opted for a more monumental option, you will first have to knock down the frame brought from the workshop. If a podium stand is provided in the fireplace you invented, you need to start assembling the base from it. If not, the fireplace body is knocked down first, and then its pipe.

Since it was planned to build a cardboard fireplace with our own hands, we will not talk about other finishing options (drywall or artificial decorative stone). For finishing, sheets of cardboard can simply be glued onto chipboard, but if it seems to you that the cardboard is thin, you can glue its sheets (by cutting out parts suitable for the fireplace) and put under load overnight. The next morning, the fireplace itself is upholstered with even and thick cardboard. Then it is given the desired look (similar to how it was done with the box).

When we make a fireplace out of cardboard based on chipboard, we should not forget about its "insides" either. Still, it will be illuminated from within, and wooden frame will be clearly visible.

Only carton, not box

If you don’t want to mess with plywood, and the boxed version seems too simple, there is another way to make a cardboard fireplace. It is also suitable if you need a “furnace” of an unusual shape, for example, triangular in cross section or high, but flat.

First you need to make a "pattern". All details are calculated very carefully so that your decorative cardboard fireplace does not turn out to be crooked. Cardboard is glued in several layers to become more rigid. Under the load, it will lie the longer, the more sheets you glued together. Then, according to the drawings made, separate parts are cut out. You can fasten them together with tape, you can glue paper strips. By the way, if you decide to stick with adhesive tape, take a paper one for pasting windows. To make the corners of the fireplace rectangular, at least for the time of assembly it is worth using the corners - plastic ones are sold in construction stores, they are quite suitable. And ideally, it would be good to leave these corners inside the structure for good. They will not be visible, but they will definitely add strength.

Since such a fireplace is assembled from parts, the inside of it can be processed before assembly. It is still more convenient to paint or paste over cardboard when it lies on a table or on the floor, and not when it stands upright. Yes, and the holes in the furnace are of different sizes; if you chose a small one, for interior decoration assembled fireplace will have to show the wonders of acrobatics.

The outer side can also be finished before assembly, but in this case, the pattern may not match when gluing individual parts, and the gluing of the corners will be visible. So the outside will have to be painted and pasted over already on the finished fireplace. Not only that, if you choose to paint, you may need to prime the surface first to hide the tape.

Lighting Options

Any fireplace assumes the presence of a flame. It is clear that cardboard does not make it possible to use real fire. You can buy or make your own lamp that imitates a fire. As an option - draw a fire on paper, cut along the contour and attach it to the hearth. A dim lamp is placed behind, and a very plausible imitation of an open flame is obtained. The disadvantage of this method is that thick paper will be poorly translucent with a light bulb, and thin paper will fall forward or backward. The output can be a wire frame, but it will need to be bent as accurately as possible along the contour, otherwise it will be clearly visible when translucent.

You can put an electric candle or a garland in the hearth. Both are better to buy on batteries, so as not to make a hole in the fireplace for the cord to the outlet.

With any choice of “flame”, branches, branches or logs must be placed in the furnace for reliability.

Fireplace maintenance

It remains to make sure that the fireplace pleases you as long as possible. If you chose self-adhesive as a finish, special care your "oven" will not require - such films are usually moisture resistant, they can be wiped with a wet cloth. But if the fireplace was painted, then for the possibility of subsequent care for it, it will be necessary to cover it with varnish. Then it can be wiped from dust or accidental contamination.

Now in the evenings you can sit in front of an almost real fireplace and feel like a medieval feudal lord.




New Year's holiday is snow outside the window, a slight frost and home comfort and warmth. New Year's atmosphere is created by various decorations and New Year's attributes. Most foreign films instilled in us a love for fireplaces, so now in Russian-speaking countries they are trying to decorate it with fir branches, toys, New Year's socks and boots filled with gifts. A fireplace is a sign of nepotism, love, harmony, and comfort in the house.

But, unfortunately, not every house has such a stove, and it is possible to install it, and this is not a cause for disappointment, because you can make a fireplace out of boxes with your own hands for the new year. This process at first glance may seem laborious, but in fact it will not cause any particular difficulties and problems. The main thing is to be patient and have the desire to create a New Year's fairy tale at home. Even a child is able to carry out such a project, but if it is difficult for him to make it a reality on his own, then you can make a fireplace yourself and involve your child or all household members in the house as an assistant. Such a craft will not fulfill its direct functions, but can become an excellent element of New Year's decor. And the unexpected appearance of a fireplace in the house for the new year will be able to surprise guests and create a real New Year's fairy tale.

Making a fireplace out of boxes




How to make a New Year's fireplace with your own hands will help this Master Class and step by step instructions a large number of illustrating photos.

List of materials needed for a do-it-yourself cardboard fireplace:

Cardboard or large cardboard box. You can take a cardboard box from under the refrigerator, TV, computer, vacuum cleaner;
Glue;
Scissors or paper cutter;
Styrofoam;
Construction molding;
Semolina;
Scotch;
Dye;
Decor elements.




It must be borne in mind that the decorative fireplace should harmoniously fit into the already formed interior. Therefore, it is important to determine in advance the shape, size and location of its installation.

So, we look at the photo and start making a New Year's fireplace out of the box:

We develop a drawing of a fireplace. Ready-made drawings can be found on the Internet, look at this photo or develop it yourself. You need to remember that the size must be calculated based on the size of the box;
Next, you need to make cuts with a clerical knife;
It is necessary to make a window for the fire if the box is one large, or construct your fireplace from smaller boxes;
The shape of the frame must be betrayed at will. It can be rounded, square or with an acute angle. See photo below;
If the fireplace will be made from several boxes, then all its components must be glued with glue or tape so that they do not fall off from each other;
After the glue has dried, if it was used, then you can start decorating such a stove;
It should be ensured that all joints match, and there are no gaps in them. To do this, follow the drawings.




How to decorate a made fireplace

You can decorate such a home decor in absolutely different ways. This requires imagination. It is also necessary that the decor fit into the existing interior, complement it beautifully and decorate it perfectly.

You can decorate:
Wallpaper under a brick;
Self-adhesive film;
Paints;
Construction border.




In order to start decorating, you need to paste over the boxes with whatman paper or paper, or foam. This is necessary in order for the surface to be even. If the fireplace will be painted "under the brick", then it is necessary to paint the surface in white paint to imitate the primer. In addition, the paint will be able to hide all the inscriptions and stickers on the boxes, because they can be colored. If you paint the fireplace “like a brick”, you need to draw the bricks with a pencil, and carefully paint over them without staining the so-called white primer. Also, the place of the primer can be glued with tape, which can be easily torn off. With this method, the errors will remain on the tape, and not on the primer.

If the fireplace will be decorated with a building border, then it will need to be glued according to the developed idea. It is necessary to glue the border on strong glue. The top of the craft must be pasted over with a thicker and more pompous border, and the walls with a thinner one. Various balustrades can be glued inside the formed areas. These balustrades can be in the form of angels, candles, or some other ornament.




After pasting the ornament and the building plinth or border, it is necessary to paint the fireplace in the desired color. The painting technique depends on the desired effect. You can paint:

in the technique of craquelure,
in aged technique,
create a modern and trendy fireplace,
Decorate using decoupage technique.

The photos below will help you decide which paint to choose for the craft.

The fireplace can be painted red, white, gold or brown. Red is always associated with the New Year holidays. It goes well with white, green and blue.




To simulate fire, you can make a metal stand that protects the cardboard and put a candle in it. This must be approached very carefully, because safety depends on it. In no case should the fire come into contact with the cardboard and not go beyond the area of ​​​​the iron stand. You can also print a photo of a burning fire in the fireplace and paste it into the fire area. It is also possible to order a 3D image of the fire online. Such a fire will shimmer beautifully. You can also buy an electronic painting depicting fire. A great solution would be to cover the place for the fire with a garland. The garland will shimmer with various lights, reminiscent of a fairy tale.

When the fireplace is completely made, it is necessary to determine its location. It will become the main decoration of the room.




After all this, it is necessary to decorate the fireplace in the New Year's style, decorating it with Christmas toys, spruce branches, snowflakes, figures of Santa Claus and the Snow Maiden. In addition, the decor of socks hung on the fireplace looks great. These socks can fit new Year gifts. Candles placed on the surface of crafts will add romance and will look advantageous on New Year's Eve.

Such homemade fireplaces are often used by photo studios to create a photo shoot. At home, you can also arrange a festive photo shoot. All guests who will be in the house for the New Year holidays will also want to be photographed against the backdrop created by hand, crafts.

Such a master class "How to make a fireplace" should help everyone to make their own New Year's decor at home. A large number of photographs and diagrams makes it possible to determine the design, shape and color scheme.




The main thing is that such an idea could unite the family even more, give pleasure to all household members and not leave anyone indifferent. And hand-made production will make the fireplace even more family, harmonious and sincere. And holiday photos will remind you of a wonderful New Year's fairy tale for a long time, beautiful decor and their golden hands, who were able to bring this idea to life.

For fun at the holiday, you will need. We wish you laughter, joy, happiness in the New Year!




One cannot but agree that the creation of comfort in the house is first of all good mood. In this connection, many people make a fireplace out of boxes with their own hands for the New Year: a step-by-step instruction with a photo is a model in this fun business. After all, it is no secret that it is not at all difficult to make a decorative fireplace, you only need to prepare an idea and auxiliary material.

The comfort created by the New Year is necessary for every home. After all, it is then that the homely atmosphere becomes pleasant and warm. It’s not at all difficult to make a New Year’s fireplace with your own hands, because the main assistants in such a matter will be nothing more than cardboard boxes. It is best, of course, to take the "former house" from the plasma TV.

I would like to note right away that in order to make a fireplace for the New Year with your own hands, it will take a certain amount of time, that is, it will not work to quickly build a decoration. Sometimes after work artificial fireplace it is very difficult to distinguish from the real one, so the result will not leave indifferent either the guests of the house or the owners of the crafts themselves.




To begin with, you can choose the necessary decoration from the photo. The picture (sample) will help to produce correct calculations and element sizes. Of course, you will have to build on the cardboard box, which is selected for crafts.

Next, you need to draw a layout on the box. Mark up clearly so that all lines are visible. Then a window is cut out to simulate fire with a clerical knife. The blade of this tool is thin, so it will not be difficult to carry out such work.

Cut should be so that the edges can then be bent, and not torn off. That is, after cutting the edges, it will be necessary to bend inward and fix them tightly with glue. This will be the basis for further milestones.




A do-it-yourself cardboard fireplace looks stylish and original, so photos with such decor cause many people to delight. And it is not surprising, because if you look at the algorithm of the work done, you can immediately understand that such a craft is being done with high quality.

Step-by-step instructions for execution include both painting and putty and the precise execution of all cut out parts. In general, you still have to try to realize such a masterpiece. After the window is cut out and the concave edges are fixed, you should proceed to the next stage of the work.

Step by step instructions on how to make a fireplace




As preparatory stage completed, you should proceed to the decoration of the fireplace. To do this, you need to make foam borders, although you can buy them at any hardware store. But if you still do it yourself, then you should take into account the angle of inclination, it should be 45 degrees, so that in the future it will be easy to fold a rectangle from the blanks, since they will serve as the edges of the hearth. Then these elements are glued on with glue.

Where the side elements are located, you can decorate with any foam figure. The top edge is decorated with a plinth to create a future mantelpiece. Looking at the fireplaces in the photo, these elements are easy to see and you can come up with your own.




Then, from any material, you can cut out a shelf from foam plastic and glue it to the glue. The stages of painting are chosen individually everywhere, it all depends on what the owner of the craft wants to see, that is, what effect he wants to give to his product.

For example, an aged surface that has small cracks is achieved by the following steps. First, the entire surface is puttied with white putty, and then dried with a hairdryer. For a smooth layer result, the surface should be coated with water-based paint. It is advisable to work in several layers.

Next, you need to simulate fire. This is best done with garlands or candles. A Christmas set of garlands glowing in a suitable color will give a real reflection of fire. Quite often, many experienced specialists in this matter stick a picture on the back wall, on which there is a real flame of fire.




Such a photo allows you to convey the real flame as much as possible. A New Year's fireplace made from boxes can be decorated according to your taste and liking. Moreover, it should be noted that such decorations can be found not only as crafts for the New Year. Not infrequently, such beauty can be observed in office premises or studios.

It should be noted that when planning a real fireplace, it will take a lot of time and the costs will be much higher than the completed episode out of the box. In addition, after complete decoration, everyone wants to decorate their interior, because this option is able to stylishly emphasize the interior as a whole.

False fireplace




Do-it-yourself fireplace from boxes for the New Year can be done in different styles, for example, many people like a false fireplace. This corner decoration is available for those who do not have a lot of space in their apartment or house. In addition, you get an additional shelf, which will always come in handy.

First you need to decide where it is best to put this decor, because the shape of the product itself looks good in the corner. And from where this product will be located, its parameters will be planned.

After that, it is necessary to prepare a cardboard box of the desired size and fold it into a triangle so that all the elements fit snugly in the corner. A window is cut in the middle to simulate fire. Many make the window a semicircle, some a square. This is how anyone likes it. When cutting the edges, it is better to bend inward and fix with glue. Then it will be easier to finish later.




It will be more convenient to make a triangle out of the box if you cut off one wall and then fix the remaining sides together with adhesive tape. Then you can already try on in the selected place. The fireplace must clearly fit into the corner space. Then the base is pasted over with a self-adhesive film. It will be beautiful if the color is chosen in the style of a brick.

On top of the product, you can make a shelf. To do this, it is necessary to cut out triangles of suitable size from thick cardboard, glue them together, and then fix them on top of the finished fireplace. You can glue such a shelf with the same film, or you can use a different color, for example, under a tree. The density of the shelf will allow you to use it for various household items. You can create a fire in the fireplace with candles or New Year's garlands.

Fireplace for Christmas




It's no secret that fireplaces are often associated with Christmas. After all, it is with the help of Western people that Santa Claus can sneak into houses and put gifts under the Christmas tree there. Despite their beliefs, many of our children know that Grandfather Frost comes at night when they are sleeping, and also somehow getting into the house, leaves gifts.

To create a fabulous atmosphere on the eve of the New Year, you can organize a cozy and warm atmosphere in your home. Just for this, you can do such crafts as building a cardboard fireplace.

First you need to pick up three boxes, but one is flat, and the other is rectangular, which will be located on the sides. If they are high, then you can cut to the required height. Then glue them together. A flat box in the middle, the rest on the sides, but they should all be on the same level.




Next, you need to prepare the border. It can be glued from cardboard, or you can pick up a box. The length of the curb should be the same with the side glued protrusions. It is glued on top, and then decorated. Plays the role of a shelf on which you can put Christmas decorations.

Then you can cut out a lot of bricks, which are applied with glue to the fireplace blank. Next, the fireplace needs to be primed and painted. Bricks can be highlighted in a different shade, so it will look more beautiful. An imitation of fire can be made from a red Christmas tree garland. The craft is ready. Such a decoration will delight with its appearance and create a festive mood, especially if the fireplace is decorated with various Christmas toys and spruce branches.




As you know, people have been using fireplaces since time immemorial. After all, such decorations are an excellent alternative to real hearths. But unlike real fireplaces, these artificial decorations do not need cleaning and constant cleaning, and with their appearance they will wonderfully decorate any interior and decorate the house for the New Year.

In a city apartment, where, due to the lack of chimneys and reliable heat-insulating ceilings, it is impossible to install a fully functional wood-burning fireplace, it is possible to design its decorative model. When using inexpensive improvised materials, the work will not require great skills in construction and expensive tools. A do-it-yourself cardboard fireplace is built in a few hours, but it looks no worse than the real one.

Children can also be involved in the work, for them this activity will be not only interesting, but also developing.

There are several models according to the location in the room:

  • wall-mounted - located near the wall and protrudes with its facade for a certain distance;
  • built-in - mounted directly into the wall;
  • corner - occupies the corner of the room;
  • island - does not adhere to the wall and is most often installed in the center of the room.

False cardboard fireplaces are most often made wall or corner, because they are not intended for heating the house, but have a decorative function. Another such dummy can be used as furniture: shelves can be installed in a niche, and the top tabletop will play the role of a shelf for small items.

photos

According to their external design, there can be a huge number of types of false fireplaces: in the English, classic, rustic style, with an arch-shaped or rectangular firebox, with a model of a woodcutter or oven. When designing, it is important to consider that this detail is combined with the surrounding interior.

photos

The simplest option that children can also make is a small model without a chimney with a rectangular portal and a firebox. Outwardly, it will resemble a large letter P. In the future, this decorative fixture can be supplemented with other elements and make a more complex decor.

It is possible to assemble a model of a classic English fireplace from cardboard. It features an open trapezium-shaped firebox and a straight chimney leading up to the ceiling. Inside the furnace niche, the walls are located at a small angle of about 20°. English version decorated with decor imitating limestone, rubble or brick.

A dummy that imitates a sauna stove or a rural style should have an arch-shaped firebox. Making a figured hole out of cardboard is not difficult. And it is best to finish it outside with cardboard or foam stucco molding in the form of bricks or cobblestones.

Material and tool

Getting thick corrugated cardboard is not a problem; you can use containers from large household appliances: TVs, refrigerators, washing machines or other goods. The entire manufacturing process can be done at home right at the place of the future location of the decorative hearth.

Corrugated cardboard is good because, thanks to internal stiffening ribs, it retains sufficient strength, while it weighs very little, and is cut with a simple clerical knife. But the cardboard fireplace even with exterior trim will not withstand a lot of weight, so you should not put heavy objects on it. It is not protected from moisture and high temperature, so a false fireplace should not be placed near heat sources, and only safe methods should be used to simulate fire.

To work on the construction of the frame, you will need the following tools:

  • stationery knife;
  • polymer glue;
  • transparent tape;
  • pencil;
  • roulette;
  • ruler.

Depending on the ways decorative finishes cardboard false fireplace may need the following materials and tools:

  • paint or decorative putty;
  • paint brush or spatula;
  • paint trays or a container for mixing putty;
  • corners, moldings, moldings, frames or profiles.

You can decorate such a hearth with putty and subsequent painting, or stick ready-made stucco, polyurethane sheets, self-adhesive laminated paper with a wood texture or natural stone. Based on the chosen method, the appropriate set of items for decoration is selected.

Plan and calculations

Even the simplest option cardboard fireplace needs a phased work plan. It includes the following items:

  • determining the shape, type and location of the fireplace;
  • the choice of materials for the frame and decorative finishes;
  • creation of a design drawing with dimensions;
  • preparation of tools and materials;
  • marking on cardboard parts of the frame;
  • cutting of elements, their gluing and installation;
  • exterior finish.

The development of such a plan is good because by performing all the steps step by step according to the existing scheme, you can gain some experience and next time start creating a more complex structure, for example, from polyurethane or plywood. Despite the frivolous work of gluing ordinary cardboard, you can make a detailed calculation of the dimensions of the firebox, portal and chimney, as for a real wood-burning fireplace. This is useful for gaining some experience in construction.

frame

Worth Considering step by step instructions to create the most common frame layouts: wall-mounted U-shaped and corner raised fireplaces.

For a wall-mounted fireplace, you will need a wide cardboard box with a height and width of 1 - 1.4 m and a thickness of 0.2 - 0.25 m, for example, from a large LCD TV. First of all, the fold and cut lines are marked on the cardboard with a pencil. Center on front side a rectangular symmetrical cut is made - this will be the furnace portal. The back of the box remains intact. For greater rigidity, they are glued inside inner walls furnaces. All sides of the frame can be fixed plastic corners or moldings. The frame is placed on a foam or polyurethane base.

For finishing the U-shaped version, it is best to use light ceiling panels white color or self-adhesive laminated paper. Styrofoam panels are attached to a waterproof polymer adhesive that dries in minutes. Another finishing method is to use water-based paint. In order to keep it firmly on the cardboard frame, you can first smear it with a primer or a very thin layer of liquid putty. After that, wait 1 - 1.5 hours for the primer to dry completely and start painting.

Corner decorative fireplace from a cardboard box is made in the form of a prism with a triangular base. The corners of the frame are tightly glued with adhesive tape or polymer glue, an arch-shaped hole is cut out in the front part, the top can be decorated with a decorative tabletop made of lightweight material, such as PVC or laminated plywood. Inside the firebox for beauty, false walls should be made from the same cardboard.

The decor of a corner cardboard fireplace can be done in the same way as the previous version: painting or appliqué. In a niche, you can place beautiful souvenirs or a toy fire, the creation of which will be described in the next section.

Portal

fireplace portal- the part where the burning of firewood takes place. In the case of imitation using cardboard, there are several ideas on how to make it look as realistic as possible and look like a real hearth. First, it is worth installing a fake firewood grate inside. Since in the present version it is metallic, it is necessary to look for light materials that are visually similar to metals. It can be plastic or wooden details covered with shiny mastic or foil. You can use black paint.

Next, we make an imitation of a flame in the furnace of such an imaginary hearth. There are several ways to create the illusion of a bright, flickering fire. The simplest and safest technique is based on the use of a New Year's garland. First, artificial firewood is made from dry branches. They are covered with cotton wool and foil. Next, a bundle of such firewood is placed in a circle of stones in a fireplace niche, and a garland folded into a ball must be inserted into its center. When connected to the mains, a fascinating flicker is created inside the fireplace, similar to smoldering real firewood.

A garland or individual light bulbs can be placed in raw salt crystals. They create beautiful effect flicker and also have a beneficial effect on the body. It should only be taken into account that the construction of the cardboard fireplace can withstand the weight of salt lamps.

On the floor at the base of the firebox, some people place a flat display on which a picture of a live fire is transmitted. This method is beautiful but impractical - to use an expensive monitor for only one image. But it is quite suitable for one-time use, for example, on New Year or other holiday.

A simpler and cheaper method of simulating a flame is using a hand-drawn picture, embossing, appliqué or a volumetric hologram. This technique can be constantly changed, creating new original images.