loops 

Grundfos sololift2 c 3 dimensions. Requirements for the operation of pumping units

Grundfos sewage pumping unit (Grundfos) SOLOLIFT2 C-3 A few years ago, Grundfos, the world leader in the production of pumping equipment, released an updated version of the popular SOLOLIFT 2 C3 sewer unit / This unit is a compact device (including all the necessary pipes and connections for successful installation), which is highly efficient and is a hermetically sealed plastic unit , relatively small sizes, in which are located - a pump with a "dry version" motor in which a check valve is built into the pressure pipe, as well as a level switch, a special ventilation built-in valve with carbon filter of improved quality, which allows you to effectively drain all sewage in your kitchen, bathroom (excluding the toilet) and other similar areas.

Pump type: |Sewer installation|
Pump type: Surface
Height: 34.1 cm
Width: 15.8 cm
Length: 49.3 cm
The weight: 6.6 kg
Working mode: 50% - 1 min. (30 sec on; 30 sec off)
Protection class: IP44
Mains voltage: 1 x 230V
Maximum power consumption: 0.64 kW
Water quality: Dirty
Permissible temperature of the pumped liquid: up to 75°C
Contents of delivery Grundfos (Grundfos) SOLOLIFT2 C-3: Adapters with the same outer diameter and different inner diameters to match the size of the pressure pipe. The pressure pipe, adapter, pipeline are connected with a clamp. Eccentric suction pipes allow the connection to be shifted by 10 mm, which facilitates the installation of the sewer installation.
Max Flow: 204 l/min cbm/hour
Max head: 8.8 m
Insulation class: F
Rated current: 3.1 A
Level on/off (from the bottom of the tank): 65(115)/35 mm
Application: Sink, shower, bidet, bathtub, washing machine/dishwasher/kitchen sink
Advantages: Operational reliability, easy care and maintenance, easy installation and replacement
Producing country: Serbia
Service in 24 hours: Yes
Warranty: 24 months

Grundfos SOLOLIFT2 (Sololift 2) is a unique series of compact sewer pumping units from the world leader in the production of pumping equipment, facilitating the discharge of wastewater from any household plumbing, regardless of the gravity drainage system. Price on sewage pumping units fully reflects their great functionality and high quality. The service life is calculated for more than 10 years (as for all equipment of the company Grundfos) , guarantee period services 24 months. Buy a pumping unit Sololift2 (sololift2) You can in our company, the whole range of products is always available for you, and highly qualified specialists are at your service to help you choose the equipment you need.

The units collect and pump wastewater through a thin discharge pipeline (>23mm) to the next overflow pipe - up to a height of 6 m or a distance of up to 100 m.

An additional toilet and a complete bathroom in the attic or basement will no longer be just a dream, thanks to the use of SOLOLIFT2 WC 1 or WC 3, as well as sololift 2 CWC 3.

The series consists of 5 compact variants pumping units for disposal of household Wastewater.

3 installations sololift , and designed for pumping wastewater from the toilet, sink, bidet, shower, washing machine and other sanitary ware.

2 installations< Grundfos Sololift 2 C-3 > and Grundfos Sololift 2 D-2Designed to handle wastewater from multiple sources (washing machine, dishwasher and sink).

The number in the model designations indicates the possible number of additional inlets (for example, model Sololift2 C-3 has 3 inlets). SOLOLIFT2 (sololift 2 ) is designed in accordance with the needs of professionals, and therefore provide high reliability, simplicity and cleanliness in service.

The units are ready to use with a plug and operate fully automatically when water is supplied to the pump drain tank.For more information on the operation of Grunfos Sololift2 pumping units, you can find

Application

The pump is used in cases where a drain from plumbing equipment is necessary, but there is no or it is impossible to use gravity drainage pipe. Units with sanitary connection are intended only for installation in private houses or apartments. Other installations may also be used for commercial purposes.

WC-1, and designed for pumping wastewater from 1 toilet, 1 washbasin, 1 shower or 1 bidet.
CWC-3 this is an optional flexible option designed to be built into the front wall.

C-3 and designed to remove (hot) wastewater from bathroom, shower, washbasin, sink, washing machine and dishwasher.

Compact dimensions allow them to be integrated into the front wall kitchen set or bathroom, and in the structural elements of the floor.

Explanation of the model name.

Deciphering the designation of SOLOLIFT2 units:

WC - the model has a connection to the toilet bowl and is equipped with a cutting mechanism

C - model with compact design

D - shower and basin model

1 - one additional connection (excluding WC connection)

2 - two additional connections

3 - three additional connections

Attention! C-3 and D-2 models are not equipped with a cutting mechanism.

The compact sewer pumping unit is equipped with:

Unit design in accordance with EN12050-2 standard, with unique properties, fast installation, long service life and easy cleaning.

The internal structure of the installation Sololift 2C3

Grundfos Sololift 2 C3 installation examples


dimensions pump GRUNDFOS SOLOLIFT 2 C-3

net weight 6.6 kg
Tank capacity 5.7 l

Flexible pressure connection ∅22/25/28/32/36/40

Possible inlet dimensions 1 x ∅32/36 /40,
top connection 2 x ∅36/40/50, side

Start and stop levels Start: 72 mm above floor level. Stop: 52mm above floor level

pH value of pumped liquid 4 to 10
Maximum temperature liquids 75 °C continuously, 90 °C for 30 minutes.

Temperature environment from +5 °C to +35 °C
Operating mode S3-50% - 1 min. (30 sec on; 30 sec off)

Rated current 3.1 A
Power factor (cos φ) 0.66/0.90

Speed ​​2800 min-1
Protection class IP44

Insulation class F
Connecting cable 1.2 m; 0.75 mm2 (H05VV-F-3G).

Supply voltage 1x220-240 V, 5-Hz.



Installation replacement options Sololift+ previous generation to modern Sololift 2

Sometimes there are situations when a pump with a grinder Grundfos Sololift is simply necessary. The most common of these include:

  1. Construction of a new bathroom in the basement. Its position was below the level at which the sewer network passes.
  2. Refurbishment or refurbishment of premises. At the same time, one cannot do without the transfer or construction of a new bathroom, and due to the far location of the entrance to the central sewer, the gravity option cannot be implemented.

In these two typical situations (although there may be many more), it is difficult to think of a more suitable solution than the Sololift toilet chopper pumping unit. Today in the plumbing market you can find many similar products, but none of them can compete with functionality, reliability and technical characteristics. It is possible that the price of plumbing fixtures from other companies with much worse performance may not be competitive.

In any case, domestic buyers have already managed to appreciate the fecal toilet pump from the manufacturer Grundfos.

Fecal pumps for toilet Sololift 2 WC

The drainage pump from Grundfos is a truly unique plumbing design. If you decide to buy this product, then before you do it, it is highly advisable to familiarize yourself with the entire model range (Sololift 2 WC 1, Sololift 2WC-3b Sololift2 CWC3) to study specifications and features. This knowledge will help you choose best option at a price, and the most suitable for certain operating conditions.

Toilet pump. It should be borne in mind that this device involves the installation (in addition to the toilet) for 3 plumbing units maximum: shower, washbasin and urinal (or bidet). The pumps of this series are practically no different from the Sololift2 WC 1 (toilet connection + one more source).

The main purpose of all plumbing devices listed above is the transportation of waste water from the plumbing unit to the sewer. Grundfos Sololift pumps are compact and fully automatic. Inside the pumps there is a chopper knife. All stations are able to effectively remove fecal effluents with varying degrees of intensity (medium and low). One of the conditions for the normal operation of Grundfos Sololift equipment is the temperature of the passed liquid - no more than 50C. The devices are not intended for pumping liquids with large mechanical fragments and chemically aggressive solutions.

Also very popular among consumers around the world is the Grundfos Sololift 2 C3 installation, which is designed for installation in the kitchen, laundry and other places where you can have a sink, washing machine and dishwasher. Due to the high technical characteristics, namely the power and ability to pump water with temperatures up to 90 degrees Celsius, it is indispensable when pumping used water into the sewer.

Requirements for the operation of pumping units

In order not to waste money in vain (the price of Grundfos pumps cannot be called cheap), you need to decide on the most suitable for this specific situation model. And only then buy it. You must also adhere to the following operating requirements:

  • installation of equipment must be carried out correctly;
  • periodically it is necessary to clean all internal elements of the pump;
  • adhere to the manufacturer's recommendations for operation as much as possible;
  • prevent the penetration of chemically aggressive substances (acids, alkalis) into the installation. From solid objects, only toilet paper can be drained into the toilet.

You can install the grinder pump yourself, but it is still better to call an experienced specialist.

Maximum performance 11.1 cu. m/hour
Power 640 W
Voltage 220 V
The presence of a cutting mechanism No
Connectivity washing machine, dishwasher, bathtub, sink, shower cabin, bidet
Type Surface sewer installation
Maximum pumped water temperature from 75°С, within 30 minutes at t 90°С
Pipe diameter 32 mm, 40 mm Ø
Dimensions (LxDxH) 373.3x158.3x255.3 mm
The weight 6.6 kg
Warranty 2 years

The universal compact sewer unit is designed to transport waste water and connect to a variety of plumbing fixtures. The Sololift 2 C-3 has the highest performance of the entire series and can be connected to:

Please note that this model is not equipped with a cutting mechanism, the ingress of foreign objects into the wastewater can lead to equipment failure. The device is designed exclusively for the removal of gray drains.

A simple principle of operation and high-quality components are the key to many years of efficient operation. The household pump is easy to maintain and does not require any additional upgrades; it goes on sale completely ready for installation.

The pumping unit is capable of pumping out liquid with a temperature of 75 to 90 C, depending on the duration of operation, the maximum uninterrupted operation time is half an hour, which is quite enough to drain wastewater.

Design features and principle of operation of the SOLOLIFT2 C-3 pump

The Danish company produces high-quality, reliable and functional pumping equipment. The sololift 2 line is very popular, has a huge number of positive reviews and fully meets modern requirements.

For the production of compact sewer installations the manufacturer used the most suitable materials and reliable components. Innovative technologies and numerous studies have led to the release of a series of unique units that save on organization sewer system and high-quality wastewater disposal.

  1. For the manufacture of cases, the manufacturer uses heavy-duty composite materials.
  2. The "dry" design of the engine increased the service life of the product, and simplified maintenance.
  3. The electric motor is housed in a dedicated plastic compartment, so it always stays clean.
  4. The non-return valve prevents overflow and reverse flow of liquid.
  5. Special carbon filter effectively prevents penetration unpleasant odors into the room.
  6. The sololift 2 c 3 model has three additional nozzles.
  7. Level switch, located in an accessible place.
  8. The cable length is 1.2 m.

High specifications and quality materials provide many years of service life.

Installation of a household pump is very simple, you can connect it yourself, guided by the manufacturer's instructions that come with the kit. The manual describes in detail each stage of installation and start-up of the equipment.

The simple principle of operation is based on the automatic switching on and off of the installation, as soon as the tank is completely filled, the discharge mechanism discharges wastewater to the main sewage pipeline. After the tank is empty, the unit automatically turns off.

Where is the Sololift 2 C-3 GRUNDFOS used?

A unique household pump will help you realize all the most daring ideas related to rearranging a sanitary area, creating an additional bath for guests or moving a kitchen from one room to another.

The main task of such sewer stations transportation of wastewater to the main pipeline of the sewer system, the device will allow you to install a shower cabin in the attic or organize a laundry room in the basement, install an additional toilet bowl and sink.

  • The unit successfully discharges sewage without faeces from nodes located below or above, and also far from the main sewer pipe.
  • In the case when water does not drain well due to a slight slope, a compact installation can also help and allow you to eliminate problems once and for all.

Grundfos sololift 2 with 3 model works with slightly contaminated wastewater, it is strictly forbidden to use equipment for pumping chemicals and aggressive substances.

Simple and quick front mounting is carried out using adapters and flexible hoses, all joints are treated with sealant.

Reliable Sololift 2 sewage pumps will create conditions and comfort in any place.

Photos of installed Sololift




















Specifications
Possible connections Toilet, urinal, washbasin, sink Toilet, urinal, washbasin, sink, shower, bidet Wall-mounted toilet, urinal, washbasin, sink, shower, bidet Shower, sink, bidet Washbasin, dishwasher, washing machine, shower, bathtub, bidet, built-in sink
Consumption 620W 620W 620W 280W 640W
Voltage 1x220-240V-10%/+6%, 50Hz 1x220-240V-10%/+6%, 50Hz 1x220-240V-10%/+6%, 50Hz 1x220-240V-10%/+6%, 50Hz 1x220-240V-10%/+6%, 50Hz
Weight kg 7.3 7.3 7.1 4.3 6.6
Fluid temperature Max. 50°C Max. 50°C Max. 50°C 50°C 75°C (no more than half an hour 90°C)
Rated current 3.0 A 3.0 A 3.0 A 1.3 A 3.1 A
Flow l/min Max. 149 Max. 149 Max. 137 Max. 119 Max. 204
pressure 8.5 m 8.5 m 8.5 m 5.5 m 8.5 m
Power cable 1.2 m, 0.75 mm² 1.2 m, 0.75 mm² 1.2 m, 0.75 mm² 1.2 m, 0.75 mm² 1.2 m, 0.75 mm²
Working cycle S-3-50%-1 min S-3-50%-1 min S-3-50%-1 min S-3-50%-1 min S-3-50%-1 min

Price, rub.

Article: 97775317

is a compact, ready-to-install, automatic sewage pumping unit. It is used in buildings of any type for pumping gray waste without feces.
The unit is designed according to EN 12050-2.

Areas of use

Sololift2 C-3 is suitable for pumping gray waste from washing and dishwashers, bath, shower, washbasin or kitchen sink. The unit is designed for front mounting in the wall. The professional design allows pumping wastewater up to 75 °C, with continuous operation for 30 minutes up to 90 °C.

Typically, these settings are used in the following cases:

  • In basements below sewer level.
  • In connection with the reconstruction or modernization of buildings in which drainage by gravity is not possible due to the fact that sewage pipe located at a great distance, for example, from the attic.

Features and Benefits

Durability and operational reliability

  • The powerful electric motor guarantees optimal operational reliability when pumping greywater at temperatures up to 90 °C.

Easy installation and replacement

  • Height-adjustable inlet and outlet connections ensure ease of installation and replacement.
  • Two selectable switching levels to suit any application. In addition, due to the narrow design of the unit, it can be mounted in tight spaces.

Easy care and maintenance

  • The removable, compact pump-motor assembly allows any maintenance procedure to be carried out quickly and cleanly.
  • There is no need to disconnect the pressure and supply lines or dismantle the unit for maintenance.

Equipment design and equipment

The Sololift2 C-3 is supplied with a sewage resistant composite tank with an inspection cover.

Characteristics:

  • Adapter (pipe) for inlet pipelines Ø32 and Ø40.
  • Two additional side inlets. One connecting insert with clamps is included in the package.
  • Two lateral inlets with built-in non-return valves to prevent liquid backflow.
  • Adapter with hose nozzle for connecting a washing machine or dishwasher.
  • Vent valve with charcoal filter, overflow protection and built-in adapter for Ø20 vent.
  • Automatic pipe coupling for connecting the pump unit.
  • Combined in one unit, the pump and electric motor are fixed in the tank with three captive screws. The discharge pipe of the pump, which is connected to the internal pipeline of the tank, is fixed by an automatic pipe coupling inside the tank.
  • 1.2 m cable and plug.
  • Flexible connecting hose for suction pipes Ø32 and Ø40.
  • Supports for floor mounting, including screws and dowels.
  • Check valve.
  • Adapters for discharge pipeline with diameters from Ø22 to Ø40.
  • Drain hose with clamps and tap.

Technical data

Net weight 6.6 kg
tank capacity 5.7 l
Flexible discharge pipe Ø22/25/28/32/36/40
Possible entrance dimensions 1 x Ø32/36/40, top connection
2 x Ø36/40/50 side
Start and stop levels Start level 1: 65 mm above floor level
Start level 2: 115 mm above floor level
Stop level: 35mm above floor level
pH value of the pumped liquid 4 to 10
Maximum liquid temperature 75 °C continuously
90 °C for 30 minutes
Max head 8.5 m
Max Flow 204 l/m
Ambient temperature from +5 °C to +35 °C
Working mode S3-50% - 1 min.
(30 sec on; 30 sec off)
Supply voltage 1 x 220-240V - 10%/+ 6%, 50Hz
Power consumption, P1 Max. 640 W
Rated current 3.1 A
Power factor (cos ) 0,66/0,90
Rotation frequency 2800 min-1
Protection class IP44
Insulation class F
Connection cable 1.2 m, 0.75 mm2 (H05VV-F-3G)

dimensions


Sololift2 units are CE marked and have the following certificates:

this is a small-sized, fully equipped and ready-to-install pumping unit, which is a hermetically sealed plastic tank in which are located - a pump with a dry check valve in the pressure connection, level switch, ventilation valve with improved carbon filter (no additional filters required), 1.2 m electric cable with Shuko plug. The pump switches on automatically when the tank is full (switch-on level) and automatically switches off when the tank is empty (switch-off level).

Vertical pumping is 8.8 m, horizontal - 90 m

The design allows pumping effluents with temperature up to 75 °C during continuous operation and up to 90 °C within 30 minutes.

Sololift2 C-3- a small-sized, fully equipped and ready-to-install sewage pumping unit for pumping domestic wastewater (without faeces) from those rooms in private houses from which wastewater cannot be directed into the sewer by gravity.

Sololift2 C-3 is commonly used for:

  • shower cubicles,
  • washbasins,
  • baths,
  • washing machines (maximum 90°C)
  • and dishwashers

in semi-basements below sewer level, or in connection with the repair or modernization of existing buildings, when their location may be away from the main sewer riser and it is not enough to establish a natural slope.

Sololift2 C-3 suitable for installation under the washbasin, or especially suitable for installation in confined spaces in structures near walls and built-in cabinets. Low on/off levels are suitable even when used with a shower tray.

The compact sewer pumping unit is equipped with:

  • Cable with plug
  • Horizontal or vertical pressure connection with several adapters for pipes with a diameter of Ø22-40 mm
  • Built-in check valve
  • Electric motor, "dry" execution, with high efficiency, including thermal protection, level switch and controller
  • Eccentric suction pipes (adjustable in height) for pipes with a diameter of Ø36 or 40
  • They have the possibility of manual protection against clogging and a separate drain connection for maintenance
  • Exhaust valve with overflow protection
  • Eyelets for fixing and mounting

Unit design in accordance with EN12050-2 standard, with unique properties, fast installation, long service life and easy cleaning.

Specifications Grundfos SOLOLIFT2 C-3:

Application: Sink, shower, bidet, bathtub,washing machine, dishwasher, kitchen sink

  • Model Number: 97775317
  • Pump Type: Sewage Plant
  • Maximum flow: 204 l/min
  • Height: 34.1 cm
  • Width: 15.8 cm
  • Maximum head: 8.8 m
  • Weight: 6.6 kg
  • Length: 49.3 cm
  • Type of pump: Surface
  • Country of origin: Serbia
  • 24 hour service: yes
  • Warranty: 24 months
  • Protection class: IP 44
  • Insulation class: F
  • Mains voltage: 1 x 230 V
  • Rated current: 3.1A
  • Maximum power consumption: 0.64 kW
  • Operating mode: 50% 1 min. (30 sec on; 30 sec off)
  • Permissible temperature of the pumped liquid: up to 75°C
  • Level on / off (from the bottom of the tank): 65 (115) / 35 mm
  • Water Quality: Dirty

Contents of delivery: Adapters with the same outer diameter and different inner diameters to match the size of the pressure pipe. The pressure pipe, adapter, pipeline are connected with a clamp. The eccentric outlet pipes allow the connection to be shifted by 10 mm, which facilitates the installation of the sewer installation.

Advantages: Operational reliability, easy care and maintenance, easy installation and replacement

REPLACE SOLOLIFT+ with SOLOLIFT2

We offer you to buy Grundfos SOLOLIFT2 C-3 at a bargain price of 24,050 rubles.

Grundfos SOLOLIFT2 C-3 is of high quality and best price. The manufacturer is known all over the world and provides a guarantee for its products.

To buy Grundfos SOLOLIFT2 C-3 in our online store, you just need to place an order online on the website

SOLOLIFT2 is a unique range of compact sewer pumping units that make it easy to drain waste from any household plumbing, regardless of the gravity drainage system.

The units collect and pump wastewater through a thin discharge pipe (>23mm) to the next overflow pipe - up to a height of 6m or a distance of 100m.

An additional toilet and a complete bathroom in the attic or basement will no longer be just a dream thanks to the use of SOLOLIFT2.

The series consists of 5 compact versions of pumping units for domestic wastewater. 3 units WC-1, WC-3 and CWC-3 are designed for pumping waste water from toilets and other plumbing fixtures. 2 units C-3 and D-2 are designed for pumping gray wastewater from several facilities.

The number in the model designations indicates the possible number of additional inlets. SOLOLIFT2 is designed according to the needs of professionals, and therefore provides high reliability, simplicity and cleanliness in service.

The units are ready to use with a plug and operate in fully automatic mode when water is supplied to the tank.

Application

The pump is used in cases where a drain from plumbing equipment is required, but there is no or it is impossible to use a gravity drainage pipe. Units with sanitary connection are intended only for installation in private houses. Other installations may also be used for commercial purposes.

WC-1, WC-3 and CWC-3 are designed to handle waste water from 1 toilet, 1 washbasin, 1 shower and 1 bidet.
The CWC-3 is an optional flexible option designed to be built into a front wall installation.

The C-3 and D-2 are designed to remove (hot) wastewater from a bathtub, shower, washbasin and washing machine.

Their compact dimensions allow them to be integrated into the front wall and floor construction elements.

Features and Benefits

  • Pumping solution that simplifies installation;
  • Availability of installation instructions;
  • The highest reliability due to the high performance of the cutting element and the motor;
  • Fast, simple and clean service - no need to remove the unit from the installation site;
  • The "dry" execution of the engine and all related serviceable parts makes repair work and maintenance simple and clean;
  • Easy access to the level control relay, access for Maintenance;
  • Sealed system with welded tank, no leakage in case of reverse flow;
  • Lack of unpleasant smells thanks to the exhaust valve and the coal filter;
  • Maintenance-free tank design reduces the risk of sludge and clogging;
  • The installation is durable hot water up to 90 °C for 30 minutes;
  • Ultra-compact design;
  • Low start levels allow the installation of modern flat shower trays;
  • Ability to select the direction of the outlet (up and to the side);
  • Easy installation and replacement of inlet connectors with adjustable height;
  • Choice of up to 4 inlets and 6 pressure pipe connections;
  • All units are approved according to LGA, VDE, EMC, GOST standards.