Gate and fence 

How to make a brazier from a gas cylinder yourself. Do-it-yourself brazier from an old gas cylinder BBQ grill from a gas cylinder drawings

It is rare that a feast or a picnic in nature is complete without grilled meat or barbecue. Therefore, a convenient and practical barbecue is no longer a luxury, but a way to have a good rest in the campaign. Such simple device can be welded from a steel sheet, made collapsible, but all this will take time and the availability of material. It is easier and faster to make a brazier from a balloon.

From which cylinder to make a brazier - gas or oxygen, it does not matter, as long as the material of the walls is without traces of through corrosion. And most importantly, a do-it-yourself brazier from a gas cylinder is made in just a few hours, faster than the meat laid in the marinade and spices will be ready for frying.

What option of a cylinder for a brazier to choose

Before deciding on the manufacture of a balloon version of the brazier, it is necessary to decide how to use the built apparatus in the future. This will be the answer to the question, from a gas cylinder. There are a lot of options and projects for balloon barbecues, each of them has its own specifics, advantages and disadvantages:


Note! The size of the container, with a length of 96 cm and a diameter of 30 cm, holds about ten liters of charcoal, which is enough for an hour and a half of the brazier.

The weight of the brazier makes it easy for two adults to carry it within adjoining territory, and even transport the structure in a car, if the legs of the brazier are made removable or collapsible.

The design of the brazier from the cylinder

The scheme of the stove from the gas storage tank is not much different from the classical brazier. The main difference lies in the shape of the bottom and the volume of fuel laid for burning - coal or firewood. The usual version is made in the form of a steel box, and the balloon one gets a semicircular bottom and side walls.

There are two ways to cut a gas cylinder - divide it into two equal halves or cut out only a sector in the side wall, leaving the upper and lower bottom intact, as in the drawing.

The first method allows you to get a relatively simple barbecue. The half-balloon design can work just as well, or maybe even better, than complex multifunctional braziers in which you can fry shish kebab and barbecue, smoke fish, steam and bake in dough, in general, do everything that a real cook's stove does.

The advantages of such a brazier include the fact that its manufacture will require:

  • Serviceable gas cylinder or tank;
  • Three four cutting disc for a grinder and with half a pack of electrodes;
  • Six or seven meters of 12 mm steel reinforcement, a can of heat-resistant paint, a pair of door canopies;
  • Four hours of free time, which is especially valuable if the guests are almost already at the doorstep.

Such designs are easy to manufacture and, as a rule, do not bring surprises to their owners associated with uneven fuel combustion.

A more difficult option would be the universal brazier shown in the photo. During the manufacture of the brazier in the gas cylinder, the bottoms were left, and a hatch or wall was made from the cut sector of the cylinder wall. And although no covers or hatches are provided in a real barbecue, amateur designs, as a rule, are made on the basis of performing several operations.

For example, a barbecue smokehouse from a gas cylinder. Usually from gas cylinders it is made according to the vertical scheme in the form of a special furnace, as in the drawing. It is quite difficult to use such a design for other purposes, for example, for cooking barbecue. Whereas the barbecue from the gas tank allows you to do both smoking and frying meat.

We build a brazier according to our own patterns

A used gas 50-liter cylinder has long become a universal blank, from which barbecue grills, smokehouses, barbecue ovens, braziers, smokers and dryers are built. Relatively thick, 2.2 mm wall metal allows you to weld handles, corners, spacers, canopies and limiters, other fasteners to the walls of the barbecue, without fear of burnout, subject to the technical conditions for welding. But first you need to prepare the gas container for disassembly and cutting.

We dissect the gas cylinder

To cut the gas tank into separate elements of the future barbecue, it is necessary to get rid of gas fuel vapors and condensate that has eaten into the metal of the wall. Experts recommend steaming the container by boiling a small amount water over low heat. After a couple of hours, all flammable gas vapors will leave the cylinder.

In practice, in most cases, metal is cut with watering the cut with water, as shown in the video. There is nothing particularly complicated in the procedure, but you will first need to unscrew the valve and flush the cylinder capacity from gas vapors with a stream of running water.

To do this, open the valve. The easiest way is to grab the threaded base for the protective cap with a large tail wrench, grab the bronze square on the cylinder valve with an adjustable wrench. The tow under the bronze carving can be carefully soaked with kerosene. Unscrew should be counterclockwise with light jerky movements. After washing from gas condensate, the cylinder is marked under the contour of the future barbecue, the container is filled with water and cutting is started.

The result is two parts of the future brazier body shown in the photo.

Rust and paint residues must be removed from the surface by any available mechanical means, such as wire brushes or sandblasting. It is necessary to tear off traces of corrosion on the cylinder to white metal. After welding is completed, the outer surface of the housing must be painted with a heat-resistant paint, for example, aluminum, or a compound to protect fittings brick ovens. Inner part the cylinder will burn and eventually turn blue-black.

We collect the body of the barbecue

First of all, on the body of the future barbecue, it is necessary to weld the hinges and limiters for opening the lid. Usually, when cutting a gas cylinder, the lid is not cut to the end, but a few millimeters are left from each corner. After welding the hinges and the handle to the body and the lid, the uncut sections are cut and a lid with perfect geometry is obtained.

To safely tilt the hot brazier cover, you will need to make position limiters at the maximum opening.

Advice! If you do not have much welding experience, do spot welding. The seam will be even and strong.

To make it convenient to turn the skewers over hot coals, it will be necessary to make two rows of holes in the body of the gas cylinder, with a diameter of 8-10 mm, a wedge-shaped groove is cut on the opposite side opposite each hole. With the help of the hole, it is enough just to turn the skewer, and with the help of the groove it can be fixed in the required position.

In the bottom part of the body of the gas cylinder, we cut with a grinder a number of transverse slots through which air will enter the layer of hot coals and stabilize the combustion temperature. The width of the slot is not more than 2 mm, which is quite enough to maintain combustion, but ash and sparks do not wake up on the cook's feet.

In some versions of the brazier from the body of the gas cylinder, a small elbow with a diameter of 70-80 mm with a vertical outlet is cut into the side wall of the finished stove. Thus, with the help of a brazier, you can smoke meat or fish. To do this, you will need to put logs inside, on hot coals, and warm up the body of the gas cylinder so that the process of high-temperature decomposition and self-sublimation of wood begins. Meat is laid out inside the cylinder on a grate, which is processed by a gas stream from smoldering logs.

The supporting part of the barbecue

In order for the design of the brazier from a gas cylinder to be truly convenient and safe, it is necessary to make a strong and rigid support system. The legs can be welded to two parallel steel angles, spot-welded to the walls of the gas cylinder.

A more reliable option is to make the legs according to the frame scheme of steel reinforcement, as in the photo. Top part the supports are welded to the walls of the gas cylinder, the lower one is reinforced with transverse spacers. The design turns out to be very stable, since the area of ​​the square described by the supports is almost twice the horizontal section of the brazier. Even with the lid open, there is no risk of tipping the entire structure.

If you make a brazier from a gas cylinder with high exhaust pipe, or put additional gas generators for a smoker or barbecue, best design supports will be the diagram shown in the photo.

This design allows you to withstand a significant weight of the brazier, and at the same time ensure a stable position on solid ground. For sand and grassy soil, the bottom crossbar will need to be loaded with a stack of firewood to shift the center of gravity down.

Conclusion

The cost of making a brazier from a used gas cylinder will cost 500-550 rubles, several meters of a steel corner and a couple of cutting discs for metal. A brazier for barbecue, bought on the market or ordered from a master, will cost an order of magnitude more expensive, in addition, the purchased item is not able to please the owner in the way that it is made by oneself.

Today on the Internet you can find a lot of original ideas regarding how and from what to make a brazier. This article will discuss how to make a barbecue from a gas cylinder with your own hands. It seems that this is unrealistic, but there were craftsmen who developed a whole technology. We will provide you detailed description, photos and videos for clarity. Moreover, you will be able to make sure that you are quite capable of implementing such an idea.

Varieties of barbecue from cylinders

There are several types of barbecue that you can make yourself:

  1. regular without lid;
  2. smokehouse;
  3. smoker;
  4. B-B-Q.

Each of these types has its own distinctive features. For example, a barbecue means a conventional design in which a part of the cylinder is cut off, hinges are fixed to install the door, and a charcoal grid is placed inside. Everything is very simple and primitive.

As for the smokehouse, everything is a little different here. Such a brazier must have complete tightness and be equipped with a firebox. To make a smokehouse, a strip of metal and part of the bottom are cut off. Additionally, the building is equipped with a pipe (chimney).

Well, another type of barbecue has such a name as a smoker. In another way, the people call it a steam locomotive. It has a barbecue, grill, barbecue and. Production usually requires several gas cylinders. After completion of manufacturing, the design really resembles a steam locomotive.

Required tools for making

To make a barbecue from a gas cylinder, you will need to collect special tools and materials. So, in the process of work, the following is necessary:

  • welding machine;
  • grinder with a cutting wheel;
  • clamps;
  • metal pipe;
  • electric drill;
  • a sheet of metal about 4 mm thick;
  • aluminum rivets;
  • hinges for mounting the cover;
  • bottle of 50 liters.

Important! Using such a container to make a barbecue is dangerous. To prevent accident, make sure it is completely out of gas before cutting.

Removing gas from the cylinder is quite simple. To do this, you need to put the cylinder upside down and completely twist the valve. Given that the gas is heavier than air, the gas will escape quickly. To check, you can use soap by lathering the neck of the cylinder. If bubbles appear, then the gas is still escaping. To be completely sure that the balloon is empty, fill it with water.

In this video, you can clearly see how to make a barbecue from a gas cylinder:

Barbecue instructions

So, the process of making a barbecue grill from used cylinders with your own hands consists of several successive stages, which we will tell you about later. Be sure to watch the prepared videos, since theory is one thing, but seeing it in practice is another.

So, first of all, take a standard 50 liter bottle. Do not cut off the side walls, that is, the top and bottom of the cylinder. Otherwise, the wind will not inflate the coals for frying meat. To cut out the necessary part in the balloon, find the seam. Using a grinder and a cutting wheel for metal, perform a cut.

After cutting along the seams, you will find the locating rings, which are necessary for joining the bottom and the gas cylinder body. They shouldn't be cut off. They will serve as a shelf for the lid. So, it turns out you cut off the balloon so that you have two parts. One of them will serve as a cover.

The next step is to fasten the loops. They can be fixed by welding, having previously fixed them with aluminum rivets. As a result, the gas cylinder will regain its shape, only a part will be fixed to the canopies. Thus, a barbecue is formed from a balloon.

The next step is to attach the handles that allow you to easily open the lid of the barbecue. For this purpose, it is recommended to use metal handles that can handle high temperatures.

Important! So that under the influence of high temperatures the gas cylinder does not lead, weld a metal corner 32 × 32 mm along the perimeter of the edges of the hole. Clamps come in handy for this. Having clamped the product with them, weld the corner to the cylinder by welding. This corner will also serve as a support for the skewers.

A similar procedure should be carried out on the side of the loops. Only the corner is welded from the inside of the gas cylinder. The next step is to work on the legs. The legs can be round or square tube, or the same metal corner that was welded to reinforce the gas cylinder. The legs are welded by welding so that they have the same length. Pay attention to the fact that it is important to decide what type of barbecue you want to make: portable or stationary. Based on this, it is decided which legs will be. For example, for a portable one, you can fix small wheels or weld metal “pyataks”, which will prevent the barbecue from “drowning” into the ground. As for the stationary, the base can be poured with concrete, and the legs can be concreted.

Advice! In the process of welding the loops to the cylinder body and its cover, make sure that everything is done exactly. Fixing it will be quite problematic. Therefore, outside help is needed here to hold the hinged lid and mark where and how to cook.

When all the main elements are welded, it remains to put the lid on the hinges. Here it is important to weld limiters for the cover. Otherwise, the lid will fall into the barbecue from the gas cylinder. After that, it is imperative to test the stability of a homemade barbecue from a gas cylinder. Open the lid and release it. If the bbq doesn't fall, all is well done. If it falls, then the legs must be additionally fastened with a corner or the angle of the legs must be increased.

To provide the necessary thrust during the combustion of fuel, holes must be drilled throughout the body. Ash and water will also fall out through them. In fact, at this stage, we can assume that the barbecue from the gas cylinder is ready.

It is extremely important to carry out quality final cleaning work. Sand all welds. Make sure that there are no build-ups in the inside of the balloon, which, during the heating process, will peel off and smoke on the meat.

Additionally, a barbecue from a gas cylinder can be equipped with a pipe, which will significantly increase traction. To make the barbecue easy to move, small wheels can be welded onto the legs. As practice shows, for the convenience of using a barbecue from a gas cylinder, it is necessary to divide the product into two parts. In one, protrusions are made for installing gratings, and in the second, slots for skewers are made. There are no special restrictions. You can view the videos and photos in this article and take the original idea for yourself.

The better to paint a barbecue

Barbecue from a gas cylinder can be painted with two types of paint:

  1. Powder thermal paint. This method is difficult to implement at home, as high-temperature barbecue burning is required.
  2. Heat-resistant organosilicon enamel. This paint is able to withstand temperatures up to 600°C.

Another method of painting is also known - oxidation. This is a rather laborious process for home craftsmen, but it is quite real. The product is treated with sulfuric acid 5%. After that, boil in a highly concentrated solution of laundry soap for two hours in a solution of sodium hydroxide. This barbecue will serve you for many years. Throughout the operation, corrosion will not take it.

Advice! Regardless of the type of paint you choose, be sure to clean the barbecue from all sorts of contaminants. Additionally, you will need to degrease the surface.

Conclusion

So, we have considered all the features of making a barbecue. This is a troublesome business, but the result will not leave you indifferent. It will be especially nice when you cook the first barbecue or fry vegetables. Such food is known to be very nutritious. For this reason, do not deprive yourself of such a blessing. With a little effort, you can do everything yourself. Complete the video and evaluate your abilities. We hope that this material will help you in this matter. In the comments to this article, you can share your own experience with our homemade readers, who, like you, want to do everything themselves, saving money.

Going out into nature with a large company involves cooking barbecue and other dishes, for this it is enough to find an acceptable place. On the suburban area or a country terrace can not do without a barbecue, a tool that provides the opportunity to cook delicious barbecue or meat alone. If you create a beautiful barbecue, it will fit into any interior of the site and add uniqueness. Making a brazier is possible with your own hands, using improvised means, such as a gas cylinder or a pipe.

Types of barbecues

Charcoal cooking is possible in many ways. Brazier has proven itself on the positive side, has a number of advantages and is divided into several categories.

  1. Portable structures are used for frequent movement. Advantages can be identified little weight and simple design, as well as the availability of ready-made options on the market. The functionality of such braziers is modest; additional devices will be needed to prepare dishes that differ from kebabs.
  2. Portable braziers have a more durable design; a brazier from a gas cylinder belongs to this category. The design can be moved inside the site or in a car trailer, has better functionality, is quite simply made by hand from improvised materials.
  3. Stationary braziers are installed in the foundation, have a solid structure and a lot of weight. The main features are the design of the structure, which, with a creative approach, can decorate a summer cottage.

In more detail it is worth considering the brazier from the cylinder, because. This device has all the functionality of a stationary device, it is mobile. Thus, a do-it-yourself barbecue from a gas cylinder can save the owner financial resources, because store models with similar parameters are not cheap. The design can vary in size, regardless of the cylinder used, which makes it possible to accommodate a large number of dishes for cooking with a large company. The height can be adjusted by welding on the legs, which makes the process of frying kebabs convenient and ergonomic. Also, with the help of improvised tools, it is possible to make decorative look, which will give uniqueness, add beauty to the summer cottage.

Preparation for manufacturing drawings and optimal dimensions

Before cutting the prepared cylinder, you need to remember safety precautions. Sedimentary vapors always remain in gas cylinders, which, when interacting with a spark or welding, can lead to unpleasant consequences.

The manufacture of a brazier from a gas cylinder begins with the emptying of the container, for this the main valve is unscrewed, the gas is vented. The procedure is performed with extreme caution, in a well-ventilated area, away from sources of fire or direct sunlight. It is possible to visually verify that the balloon is empty using a soapy solution, it is enough to apply it to the outlet nozzle, observe the formation of bubbles. If gas escapes, respectively, soapy water begins to bubble, after which it is necessary to unscrew the valve wrench, completely remove it from the cylinder.

After bleeding off the gas, it is necessary to turn the gas container over, drain all the condensate. After that, water is supplied under high pressure, which will displace the residual vapors and remove the condensate completely. Drainage of water must be carried out far from residential premises, the properties of the gas are such that a fire can occur at a low concentration. Compliance with the sequence of all procedures makes the work safe for humans.

To make a brazier with your own hands, you need to use the drawings. The dimensions are selected in accordance with the volume and shape of the cylinder, with standard equipment the height is 98 cm, the diameter is 30 cm. The wall thickness of the gas container is standard, but may differ from the direct purpose of the cylinder, it is 0.3 cm, the weight of the cylinder is 22 kg.

Cylinder marking

Before making a brazier from a gas cylinder, it is necessary to mark it according to the required parameters. To mark, ordinary chalk is used, the process is as follows:

  • A certain diameter is 96 cm, it is easily divided into equal parts. For uniformity, marking is made according to longitudinal seam.
  • Marks for placing skewers are set in a horizontal position, 24 cm in each direction recede from the seam.
  • The device of the cover is carried out according to the deviation of 3 cm from the seam.
  • 10 cm deviate from the two lines obtained, this is done for parallel fastening of the legs in the future.
  • The cut lines under the cover act as borders, which are applied at the first stage (24 cm of indent).
  • If there are inner rings in the design of the cylinder, it is necessary to work carefully so as not to damage them. In the future, they will play the role of a lid holder.

Layout and dimensions of the future brazier in the drawing

Work on the manufacture of barbecue does not require special drawings. It is necessary to mark the parameters of the future barbecue based on the size of the balloon. A specific barbecue scheme from gas cylinders is not required, it all depends on the functional accessory, the size of the device. The height of the cut and cover is regulated by the combustible means used. If ready-made coals are used, it is possible to cut the cylinder in half; in case of burning firewood, the lid should be higher so that the blanks do not fall out.

Choice of gas bottle

Used for gas grill suitable material including the balloon. You can find the appropriate barbecue cylinder in the country if propane was used gas-burner, at scrap metal collection points or private ads. The gas brazier is standardly made from a cylinder with a capacity of 50 liters. The main selection criteria is the whole body without rust and oxides, in order to prevent further destruction of the finished product.

Tools needed for the job

For quick work, you need to prepare the appropriate tool. You will need a set of home master tools, as well as a few additional things:

  • grinder or grinder;
  • welding machine of any type;
  • facilities personal protection, glasses, gloves;
  • metal door hinges in the amount of 3 to 5 pieces;
  • rivet gun, rivets;
  • chisel, hammer;
  • screwdriver, wrench;
  • drill with a set of drills (a drill of 10-12 mm is required);
  • pipes for the chimney and legs, the latter are used materials from unused sewing machines.

The use of tools requires certain skills, the material of gas containers is quite thick, not every novice master will be able to competently cut and weld metal.

How to properly open a propane tank

Safe work is achieved through well-executed preparatory work. The washed cylinder must be cut into two halves with a grinder, the process is carried out as close as possible to the weld. The side walls are not dismantled, their purpose is to protect the fire from the wind, to maintain temperature indicators. The support rings should not be sawn, their task is to keep the lid closed.

How to paint

From an aesthetic point of view, it is necessary to paint the balloon. The process is the choice of each individual, it is not at all necessary to spend time and effort on it. To paint the brazier from a gas cylinder, you should use high-quality components that do not decompose under the influence of high temperatures, without changing taste qualities food.

Before painting, a primer layer is applied, which is selected on the market according to the type of paint. Before purchasing, you should study the purpose and instructions, the temperature of the paint should be more than 600 degrees. As a rule, these materials are environmentally friendly, so it is possible to paint the building not only from the outside.

We make a brazier from a metal cylinder

For country use, an ordinary barbecue is often not enough. It is possible to make a barbecue with your own hands from a gas cylinder. For this you need to follow step by step instructions, in this case, you get a beautiful, high-quality product.

  1. The hinges for attaching the lid to the body can be welded on before cutting, so that they are installed evenly, without distortions in relation to the top. The cover is fastened to the body with a metal bar.
  2. The limiter must be installed on the back of the brazier to prevent the lid from completely lowering. So it will be convenient to close and open the device during use.
  3. Blower holes can be drilled, but it will be much faster to cut them with a grinding tool. Vertical slots are made along the entire length, holes for attaching skewers are drilled with a drill with the required distance.

Barbecue legs can be made independently different ways, it is also possible to use a ready-made stand from the old sewing machine. The frying process in accelerated mode implies a closed lid; a pipe must be mounted to remove smoke. A balloon barbecue is made by adding corners to the structure in the inner part, for attaching a mesh or metal bars.

Brazier steam locomotive

The design, called a steam locomotive, combines several devices at once, has rich functionality. The device is used as a grill, barbecue, smokehouse and a regular barbecue. Each component has significance, certain functions.

Brazier "Steam locomotive"

The design of this type of barbecue from a gas cylinder resembles a steam locomotive, if you make an effort to look. Additional designs allow you to store firewood, products, etc. When making a locomotive, it is equipped with all sorts of details to increase the functionality of the device. Brazier steam locomotive from a gas cylinder allows you to simultaneously smoke products, cook vegetables and fry shish kebab, an indispensable device for a large company.

Features of a brazier made on the basis of a gas cylinder

Self-manufacturing makes it possible to select the necessary parameters, the functionality of the equipment. Braziers from gas cylinders are popular among owners of summer cottages and houses. Installation additional elements Allows you to cook a variety of foods in a variety of ways. The offered models on the market often do not meet the wishes of the client, there are no height adjustments or the design is not capacious enough.

Advantages and disadvantages

All devices have a number of positive and negative sides. The brazier from gas-balloon equipment became famous for its simplicity of design and other qualities:

  • a simple manufacturing method allows even an inexperienced craftsman to build a brazier, having tools, fixtures, and a visual aid on hand;
  • the use of improvised means excludes financial costs, monetary losses entail only a tool, some additional elements;
  • long service life is due to the thick metal in the walls of the cylinder, the manufactured part is not subject to temperature effects or mechanical damage;
  • The flip-top lid allows you to cook your favorite dishes outdoors in adverse weather conditions.

    • Brazier from a gas cylinder in the form of a wild boar

    Disadvantages of a brazier from a gas cylinder:

    • the dimensions of the structure may not always allow you to move, install the brazier in the right place;
    • the weight of the structure is large, so moving without special devices alone is impossible;
    • the use of firewood will delay the cooking process for a long time.

    The nuances of using the received product

    Correct technical operation makes it possible to use the manufactured structure for a long time. During downtime, it is better to clean the structure indoors to avoid exposure to direct sunlight and the formation of corrosion.


    Odors are eliminated by burning the inside of the brazier. The design must be used away from flammable parts, as a spark may jump out during operation. After use, it is recommended to pour out the ashes, high-quality raw materials can continue to smolder for up to several days.

To date, among summer residents and owners country houses the topic of creating all kinds of barbecues, smokehouses, barbecues, stoves, etc. is popular. People began to relax more with their families on weekends, gathering at the dacha to fry barbecue, what could be better fresh air and deliciously cooked barbecue))

But in order to cook everything soundly and with high quality, you need a brazier-smokehouse-barbecue, for example, the author made this miracle from old gas cylinders. At first, the master simply made a barbecue grill from a cylinder, then he wanted to improve his creation and he added another small 25-liter cylinder as a smokehouse firebox, and a large cylinder plays the role smoking chamber. The compartments communicate with each other, the small one is located at a lower level in order to form a draft and the smoke independently passes into the smoking compartment.

A small cylinder can also be used as a brazier or a barbecue, there is only one grate to fit there, and there are 2 times less skewers, but in total with a large cylinder you can increase the productivity of shish kebab / hour)))

And so, let's look at what is required to create a smokehouse-brazier-barbecue?

materials

1. 25 l gas cylinder
2. armature
3. 50mm metal pipe
4. sheet metal 2-3mm (for damper)
5. hinges 2 pcs
6. pen holders
7. pipe 50 mm long 1.5 m
8. lid opening limiter (fittings)

Instruments

1. grinder (UShM)
2. welding machine
3. drill
4. hammer
5. file
6. ruler
7. marker
8. pliers

Step-by-step instructions for making a do-it-yourself smokehouse-brazier-barbecue.

As mentioned above, the author already had the main brazier from a gas cylinder (By the way, the site has previous material on how to make a brazier and cut a gas cylinder correctly) But the master decided to improve his design and increase its functionality, and as a result, productivity , adding another small compartment to the existing barbecue.

An old 25 liter gas cylinder was taken as the starting material (see the site for how to cut a gas cylinder). The cylinder was cut in compliance with all safety regulations.

Then, in its end part, with the help of a grinder, a technological hole in the form of an ellipse was cut out, two cylinders will be connected through it.

After that, the master proceeds to the manufacture of the cover of a small cylinder, namely, he makes markings with a marker and makes a cut with a grinder along the intended contour, but you do not need to cut everything right away. We make one cut and immediately weld the hinges, and only then the entire lid is sawn out.

Loops welded on.

At the opposite end of the small cylinder, another technological hole is made in the shape of a triangle; it will serve as a blower and regulate the air flow into the combustion chamber.

On a large cylinder in its end part, a hole is also made for installing a chimney pipe.

Pipe diameter 50 mm length 1.5 m.

Here's what actually happens.

Holders for a pen are welded onto a small balloon, and wooden handle made from a shovel handle.

A limiter made of reinforcement is also welded for a certain opening angle of the brazier lid.

A damper is installed, it is slightly larger than the hole itself and serves to regulate the air supply and draft, respectively.

After the firewood disperses, we turn the damper to a minimum in order to maintain smoldering in the combustion chamber.

It is advisable to use alder firewood, very fragrant smoked meats are obtained on them) The author smoked chicken wings and sausages, smoked for an hour.

Periodically, you should open the lid of the smoking chamber and check the condition of the product.

Draft excellent chimney handles.

Field trips are almost always accompanied by cooking shish kebab or vegetables on fire. To prepare these dishes, you should take care of a suitable place. For this reason, many are wondering how to make a barbecue from a gas cylinder.

Peculiarities

The brazier from old gas cylinders is divided into several types that you can easily make yourself.

There are the following varieties:

  • a simple brazier in which there is no lid;
  • B-B-Q;

  • smokehouse;
  • smoker.

Three last homemade designs are significantly different from the first Therefore, you should familiarize yourself with their features in more detail:

  • B-B-Q is a simple design that you can easily create with your own hands. To create such a brazier, you will need to cut off a part of the container, which will later be hinged and act as a door. Inside the structure there is a zone for coals and a grid on which products will be placed.

  • Smokehouse differs from traditional barbecues in that it contains a firebox. The structure itself must be airtight in order to fulfill its tasks. To create it, half of the bottom is removed. The firebox is made of iron sheets. Some people use a different cylinder for this purpose. The part is welded and equipped with a special chimney pipe through which smoke will be removed.

  • Smoker also called "steam locomotive". It is a complex structure, which is characterized by multifunctionality. Such a product contains all the options that are available to such facilities: barbecue, barbecue, smokehouse, grill.

To make such a design yourself, you will need to stock up on several cylinders, each of which will have its own role. In the end result, the smoker will look like a steam locomotive.

Barbecues are made from propane and oxygen cylinders. Cylinders act as an excellent basis for creating numerous designs. They have high quality metal, almost finished form and standard dimensions. These features make it possible to create a brazier with your own hands in a short period of time with minimal investment.

Due to the thick walls, the cylinders are able to withstand high temperature conditions, so such products are best suited for creating various smokehouses, barbecues and barbecues.

Advantages of a brazier from a cylinder:

  • This design will not burn out even after prolonged contact with an open flame.
  • Thanks to the optimal configuration and thick walls, the brazier will not be deformed by high temperatures.
  • In such a barbecue, you can cook not only kebabs, but also bake vegetables, as well as smoke and fry.
  • After cooking, you do not need to extinguish the coals with water. For these purposes, it will be enough just to close the brazier with a lid. It also allows you to store the barbecue outside. Due large sizes you can cook portions for the whole company.

  • Even if you need to purchase a cylinder, such a structure will cost you less than buying metal sheets in a store.
  • Ease of installation. Even a beginner can make a brazier from a balloon.
  • The job will take several hours.
  • The design of the balloon is suitable for the implementation of any creative ideas.

Braziers created from cylinders have practically no drawbacks. Some users say that the disadvantages of the design are the large dimensions of the structure. However, you can purchase more compact products. Another category of people reports that the semi-circular bottom is inconvenient when lighting firewood. Looking at the situation from the other side, this configuration ensures that the coals are located at the edges. This contributes to high-quality roasting of meat, which, when cooked on traditional roasters, can remain raw.

According to professionals, the spherical structure of the brazier walls is not very suitable for frying kebabs, since such a configuration limits the processes that contribute to the "disclosure" of the aroma of baked meat.

Preparation of materials and tools

Before using the machine for welding, you will need to select the desired gas cylinder and prepare it for further activities. You should also take care of creating sketches of the future design and stock up on the tools and materials necessary for work.

To create a brazier, you can use any cylinders that have the shape of a cylinder. The most commonly used container is 50 liters of propane.

If you want to get a more mobile barbecue, the dimensions of which allow you to place it in the trunk of a car, use a traditional 27 liter cylinder. At the same time, it should be taken into account that the width of the working area may be insufficient due to the spherical shape.

Also, a diesel gun can be used to equip the brazier, which has an external resemblance to gas cylinders.

Gas cylinders are made of high-alloy and low-carbon steel grades 30XMA, 45, 34CrMo4, 30XGSA. Due to the high content of the ligature, as well as its reduction, the metal becomes more durable and resistant to the corrosion process.

The best option for creating a barbecue is the use of a car gas cylinder with a volume of 50-80 liters. It has an increased diameter, which increases the comfort during ignition. Also, this product has sufficient capacity. Due to its large size, its width allows you to use the entire length of standard skewers, so you can prepare a portion of food for the whole company. Among the nuances is the fact that unnecessary car cylinders are rare, unlike propane ones, and buying a new one is considered impractical.

In addition to the receiver, you will need the following components:

  • line segment steel pipe and corners;
  • metal handles that will be attached to the lid;
  • hinges - you can use elements designed for doors or furniture;
  • a pipe with a diameter of 100 mm, and its elbow should be 90 degrees. A pipe will be required if a chimney is provided;
  • barbecue grill;
  • material for fasteners: bolts, nuts, rivets.

Prepare decorative elements with which you can give the building a noble look. You will also need primer, paint and solvents.

If we talk about the list of tools, you will need the following items:

  • welding machine;
  • electric grinder;
  • electric drill;
  • drills designed for metal work;
  • clamps with which you can fix metal components;

  • metal ruler;
  • electrodes with a diameter of 3-4 mm;
  • cutting and cleaning discs for grinders;
  • scriber;
  • core;
  • adjustable and gas wrenches;
  • set of wrenches.

If you plan to paint the structure in the future, prepare a brush head for a drill or grinder. You will also need a brush or sprayer.

Having prepared all the necessary items of materials and tools, you can proceed to further steps.

Drawings and diagrams

Braziers from gas cylinders are considered simple structures, so you do not need to create a detailed project. However, at the initial stage, a small drawing should be drawn, which will indicate the dimensions of each component. Don't forget to specify where the blower should be placed.

Creating a diagram will allow you to decide how much material will be needed for the job, as well as competently plan the connection of individual components.

Do not neglect this stage in order to exclude oversights in further work.

Precautionary measures

When working with a barbecue from a cylinder, you should think about how to protect yourself from an explosion. Even if you have completely unscrewed the valve and there is no gas inside, do not rush to cut the metal. Despite the fact that the pressure in the cylinder is identical to atmospheric, there are still dangerous substances inside: condensates, propane.

To remove condensation, you will need to turn the product over. To eliminate explosive substances, fill the vessel with water and leave for several hours. Only after completing these measures, you can start cutting and welding.

Manufacturing technology: step by step instructions

Everyone can make a brazier from a gas cylinder. Do not forget about safety precautions in work, as you will need to cut the product in which gas was previously present. Sparks and gas residues must not be allowed to ignite.

How to make a barbecue with your own hands:

  • First of all, you need to unscrew the valve so that the remaining gas leaves the cylinder.
  • Then you need to turn the product over and wait until the remaining condensate merges. You can control the exit process with soap suds. When the bubbles stop appearing, you can proceed to further steps.
  • Now you should fill the vessel with water, as described earlier, and drain the liquid after a few hours.
  • Lay the container on its side, cut off the valve. Do not forget to water the place of sawing with water.

These steps must be taken on early stages. After you have carried out these activities, you can proceed to the next steps, cut and weld the necessary elements. With the help of these actions, you will get a high-quality brazier on which you can fry shish kebab.

markup

In most cases, the barbecue is made from a 50-liter propane tank. On such a container, you can cook 6 servings of shish kebab. These cylinders belong to the category of standard products, so the marking is considered to be the same. If you do not need such a large brazier, you can make it from a small balloon.

The outer diameter of the container is 96 cm. Given value should be divided into four parts. When carrying out these actions, you will receive a value of 24 cm. Marking should be done along the longitudinal seam. It is recommended to measure all distances from this line. This rule ensures smooth marking without distortions.

You will need to measure 24 cm from the seam on both sides and draw lines. Then you need to put the product horizontally. Make sure the seam is at the bottom. Make a markup for the location of the skewers.

Find the circular seams and measure 3 cm from them. Actions should be carried out on both sides. Further marks are placed every 8 cm. In the end, you should get 6 points. Holes should be created in them, the diameter of which is 1 cm.

From the marking line, measure 10 cm upwards. To simplify the task, you can measure 34 cm from the middle seam. The lid will end at this point.

Now you should mark the cover itself. Pay attention to the first marked line and the last one. Draw lines between them. They should be located 3 cm from the circular seam. The grill cover is ready. It should occupy less than half the diameter.

Sawing

Cut the balloon into two pieces. This event is carried out along the weld. Try to work the tools as close to the seam as possible. It is better not to touch the side walls. They will act as a good flame damper and help maintain the temperature.

When cutting, make sure that the side rings are not damaged, as they act as a support for the cover.

Assembly

During the use of the brazier, you may encounter deformation of the product. To exclude this phenomenon, it is recommended to weld corners in the inner longitudinal edges of the base. The corner forms a ledge on which a grill or skewer can be placed. High legs will also require additional fixation, which is provided using a welded corner. It should be placed on the outer perimeter.

Make holes in the bottom of the product. They will be required for convenience when pouring out coals or draining water after rains. Also, these holes provide traction, which affects the burning of firewood.

At the place where the valve was present, a pipe should be installed with which smoke will be removed. Weld this element. Some people do not install a chimney in their barbecue. You can also refuse this component if you plan to fry kebabs with an open lid.

If you have not welded a corner for skewers inside the balloon, you can insert it into the sides of the barbecue. To do this, you need to make cuts with the help of a grinder. The ends of the skewer will be located in them.

Leg work

You should decide how high the future brazier will have. After that, you can start screwing the legs. The product must be firmly on the ground so that the cover can be welded more conveniently.

The height of the legs depends only on your wishes. Some use legs from sewing machines or pipe trimmings for these purposes.

To attach the pipe, drill 4 holes in the bottom of the product. In the future, it is necessary to insert bolts into them so that their threads are located outside. You can simply tighten the elements or use welding. Nuts are welded to the top of the pipes and screwed to the barbecue. Bolt nuts can be attached to the top of the legs by screwing them to the base of the future barbecue.

Installation of handles and cover

To secure the cover, you will need to make holes for the hinges and fix them with rivets. Then you need to weld the components. If you choose to skip this action, the lid will come off after being affected by the elevated temperature. It is possible to mount a removable cover on which there are no hinges. In this case, you will need to fix the metal strips on the transverse edges of the container. They won't let the lid fall off.

To attach the lid handle, you will need regular bolts. Drill holes for the bolts and secure. It is best to choose simple handles that are resistant to high temperatures. You can also create handles yourself from metal rods. They will need to be welded to the base. Install the limiter on the cover. It is created from corners or parts of pipes. The lid itself can be fixed with chains. The chains will affect the degree of its reclining.

The manufacture of a brazier-smoker is slightly different from this technology. The main difference of this type of brazier is its tightness. The smokehouse is made in the same way as a regular barbecue, only with the addition of a firebox. To do this, you will need to cut off half the bottom under the firebox. The element itself is created from sheets of iron or other materials with similar properties.

Some craftsmen make fireboxes from smaller cylinders. The finished component is welded to the barbecue. Do not forget about the chimney equipment, which is a must. You can buy a pre-made chimney or make your own.

If you are not afraid of difficulties, you can add a motor to the structure, which will be responsible for the rotation of the spit.

You can smoke products after you burn the finished barbecue with firewood. If the smell of gas has strongly permeated the walls of the container, you will need to heat the product several times until the unpleasant odor completely disappears.

Brazier steam locomotive has several options at once: grill, smoking, barbecue, barbecue. A structure is made from several pipes or cylinders, each of which has its own function.

Mangal steam locomotive appearance really looks like a steam locomotive. Some craftsmen focus on the design of the design in order to bring it as close as possible to their name. You can add wheels made from balloon parts, or you can use artistic forging.

You can also add pull-out tables, a lattice and other elements to the structure that will have not only functionality, but also an aesthetic component. With the help of one steam locomotive, you can cook barbecue, grilled vegetables and smoke at the same time.

This brazier has a high performance. This indicator is influenced by the closed cover and material. Even if there are some coals left inside, the heated body of the product will give off for a long time thermal energy required for cooking.

If you are planning to create a steam locomotive, weigh your capabilities and skills. Not every amateur can make such a design, since it is quite complicated.

What to paint?

The surface of the brazier, which is made from an old cylinder, can be covered with several materials. For these purposes, apply:

  • Silicone enamel with good heat resistance. This coating can withstand temperature regime up to 600 degrees.
  • Powder thermal paint. This option is not allowed for home use because it needs to be fired in a kiln at high temperatures.
  • You can also use oxidation. He is good option for anticorrosive processing of a brazier.

Also exists folk way which will protect the brazier from rust for a long time. First of all, the container body should be treated with a 5% solution of sulfuric acid. Then boil it in a solution of high concentration laundry soap. After that, the product should be boiled in sodium hydroxide for 30 minutes.

Mangal processing is considered a must, as iron can oxidize and rust. These measures contribute to the extension of the service life of the structure. When painting your structure, make sure that the material used matches the qualities stated above.

Even if you have treated your brazier with an anti-corrosion coating, it is not recommended to leave the product in the rain or snow. The optimal place for installation is a canopy. When the cold season comes, the structure should be sent to a garage, barn or other utility room.

  • When lighting a fire, the internal zone of the structure should be divided into two parts. In one where there is a large amount of heat, meat should be cooked. In a zone with a lower temperature - bake fish or vegetables.
  • It is not recommended to turn the skewer frequently. For a good frying, you only need to turn the meat twice.
  • Coals should have a red color with a gray coating.

  • Be careful not to char the meat. Black plaque on the product is a direct path to various cancers. Also, don't eat undercooked meats. Such products can cause infection with helminths.
  • With a few branches from fruit trees you can give the meat a special flavor.
  • If you are cooking in the rain, you should not rearrange your barbecue in the room. Poor draft levels will increase the concentration of carbon monoxide.
  • To prevent fire, place the structure away from flammable things. Grass, boards or branches should not be located near the legs. Ash should not be thrown away immediately, as it can smolder for a day, which can also cause a fire.

Original design examples

There are many original examples for creating barbecues from a gas cylinder. This event is only limited by your imagination and skills. Will be enough for someone simple structure from a gas cylinder, in which there will be a stand for skewers, and another category of craftsmen wants to make a real work of art.

The brazier in the form of a pig will attract attention. To create such a structure, you only need one balloon. Position the product in a horizontal plane, equip the cover. The lid must be hinged. Legs can be made from metal pipe. In order for them to securely fix the structure, a grate should be installed in the center of their height.

"Pig's snout" is created from a piece of metal pipe. "Rot" is also made from this material. "Ears" can be created from pieces of metal that are welded to the head of the "pig". To make the figure look spectacular, the masters recommend using elements of artistic forging.

It will be interesting to look at the brazier in the form of a submarine. Such a structure is difficult to create for a beginner, but if you have the appropriate skills, you can surprise all your guests. A similar design is also created from an old cylinder and iron sheets.

Braziers from cylinders in the form of a log are considered a real art. It will take a lot of time to work, but the result is worth it. To enhance the effect, you can install a saw or an ax in the center of the structure. This addition makes the figure complete.

Brazier steam locomotive is considered the most common design option. Such a multifunctional creation can have a different appearance, depending on your imagination. With the help of tricks, you can create a real work of art from a simple gas cylinder. Such a brazier will decorate the recreation area and show your talent.