Heater infrared gas ballu bigh 4 instruction. Gas infrared heaters from a cylinder: varieties and features. How to choose an infrared gas heater for the garage

The lineup:

Ballu BIGH-4 - 4.5 kW

Gas infrared heater BALLU GAS COMPACT series - modern economical heater for directional heating. It has absolute efficiency (efficiency = 100%) and does not require any connection to the power supply at all. BIGH-4 is excellent for local heating of work areas in open areas where application traditional ways heating is inefficient. Possibility of local installation in a place where heating is needed, provides fuel economy.

The thermal radiation of a gas infrared heater, like sunlight, is weakly absorbed by air and reaches the heated surfaces almost without loss. Heat is transferred directly to dense objects (floor, walls, etc.). Infrared heaters operate almost silently, do not overheat the air, do not mix air and dust. The power of the BIGH-4 heater can be smoothly adjusted in the range of 3.0-4.5 kW.

The ceramic heater panel undergoes special pre-testing at the factory. Class A is assigned to panels that have successfully passed all tests. The panel is protected by a stainless steel grille.

The device is protected from gas leakage in case of flame failure by means of a gas valve, which is controlled by a sensitive thermocouple. If the wind or other external influence extinguishes the flame, the gas supply will immediately stop.

The body of the panel is covered with heat-resistant enamel. This coating will keep attractive for a long time. appearance and protect the instrument from corrosion. The detachable leg easily disassembles into 2 parts, allowing you to fold the device into a compact package when not in use.

MODEL FEATURES
Professional for outdoor use and heating of technological zones;
Efficient heating of open areas;
Possibility of local application;
Comfortable even heating;
Complete independence from power supply;
Absolute efficiency: 100% efficiency;
High quality premium ceramic panel A;
Protective thermocouple for flame control;
Smooth power adjustment;
Detachable leg: super compact package size;
Quick set up: 1.5 m gas hose and reducer included

PURPOSE
Main: local heating of working areas outdoors and open areas.
Additional: cleaning surfaces from ice and snow and maintaining them in such a state, heating and drying materials.

SCOPE OF APPLICATION
Construction zones, sites, open verandas, terraces, gazebos, etc.

MODEL SELECTION
Infrared heaters, unlike guns, do not heat the air, but the surfaces of objects and people in the area of ​​action. The heating area depends on the power of the emitting infrared panel and the distance to the heating object. Objects located within a radius of up to 4-6 meters from the radiant panel, depending on the operating conditions, fall within the coverage area of ​​the outdoor heater.

Specifications:

There are devices that do not require either a stationary heating system or a coolant for their operation. Their use is convenient in any conditions, even in the absence of any communications. Gas infrared heaters from a cylinder work at the expense of a stock of propane. And although this method of heating a room cannot be called the safest, it is quite popular among a wide range of users. Let's try to figure out why.

According to consumer reviews, the first and main advantage of heating with infrared gas heaters is the lack of connection requirements to any networks. In fact, such a heater can be installed anywhere.

All that is needed for the full operation of the device is a cylinder filled with liquefied gas. If you believe the reviews, gas infrared heaters for summer cottages may well work if they are connected to a centralized gas supply system.

Manufacturers claim that you can use such equipment anywhere: in an apartment high-rise building, in a private house, in a garage, in a greenhouse, etc. At the same time, the device is quite mobile and, if necessary, can be easily transported. In addition, there are several types of heaters, allowing you to choose the most suitable option.

All gas heaters can be of two types:

• those that heat the surrounding objects;
• those that release heat into the air.

If we talk about infrared heaters, then they work on following principle: Objects are subject to heating, which, in turn, give off heat into the air. This method is considered the most effective, but it has a significant drawback: objects that do not fall into the coverage area of ​​​​the device remain cold. It is pleasant to sit near such a heater, for example, while reading a book, but sufficient power of the device is required to heat the whole room.

Gas infrared heaters from a cylinder: the principle of operation

The use of infrared heaters has some features. For example, in order for the device to cover a large area, it must be placed as high as possible above the floor surface. In this case, the range of its impact will be as wide as possible, and the room will be warm enough.

The gas infrared heater consists of the following elements:

• body made of metal;
• heat exchanger;
• divider;
• automatic control unit;
• reducer.

As for the sizes of heaters, they can be very different: from small compact models to overall devices designed for large rooms, warehouses, garages, etc.

Note! Keep in mind that some distance must be maintained between the heater and the gas cylinder. Otherwise, there is a risk of an explosion triggered by a flame inside the device itself.

If we talk about the principle of operation of the device, then we can distinguish the following processes:

• the flow of gas from the cylinder into the reducer, where the gas pressure is reduced, after which it enters the heater nozzle;
• mixing gas with air and their joint entry into the ceramic panel;
• uniform combustion of gas and, as a result, the complete absence of combustion by-products;
• heating the ceramic component of the heater and further transfer of heat through infrared radiation.

As a result of the fact that the device heats the objects around it, the general air temperature also rises. Therefore, infrared gas heaters are perfect for summer cottages, garages or greenhouses.

How to choose a gas infrared ceramic heater

Before you buy a gas infrared heater for a summer residence or at home, you need to familiarize yourself with a number of characteristics that determine the purpose of this device. Depending on the power, as well as design features, each of the options is most suitable for specific operating conditions.

The main guideline when choosing infrared gas heaters is their safety, so here you should exercise maximum caution and care. A mandatory requirement for the purchased model is a built-in automatic shutdown system, which is triggered when the product rolls over or is strongly tilted. Today, such a security measure is considered mandatory.

Note! Another one useful feature – automatic shutdown gas supply in case the burner is accidentally extinguished.

In the choice, a serious role is played by where exactly the heater is planned to be placed. So, for residential premises, it is necessary to have a special sensor that will indicate the level of carbon dioxide in the room. Indeed, in the process of combustion, carbon dioxide is released, which can accumulate. In large quantities, it is unsafe for both health and human life.

In the presence of a special sensor, the level of carbon dioxide in the room is regulated as follows: the device regularly takes a sample, determining the current level. At the same time, he compares it with a given boundary. If the current level has reached the limit, the device switches off automatically.

How to choose an infrared heater for a summer residence

In order to buy a gas infrared ceramic heater, you need to focus on the mode in which it is planned to use it. Perhaps you will turn it on periodically when you come to the country for a few days. If long-term operation is planned, then the efficiency of the device will play a significant role, because its long-term use will entail certain costs.

When choosing an infrared heater for a summer residence, be sure to pay attention to the power of the device. There is a simple rule to be considered here: the more powerful the device, the less mobile it is. And, accordingly, vice versa. A simple and lightweight device will never be able to produce the same power as a massive bulky heater.

The choice is not affected in this case. total area premises. After all, such devices do not heat the entire room, so its size does not matter. Think in advance where you will install the heater, and what area it will need to heat.

Helpful advice! It is always better to purchase a heater with a reserve of power, and not to use it at maximum capacity. So you can, if necessary, heat a large area.

The appearance of the device will also play a big role, because everyone wants the heater to naturally fit into the environment and not create visual discomfort.
Despite all its advantages, it still cannot be considered a full-fledged heating device if we are talking about permanent residence in home. Its use is fully justified as alternative for short periods of time, or as an additional source of heat.

How to choose an infrared gas heater for the garage

Buy gas heater for the garage is one of the most difficult tasks. After all, initially this room is filled with a large amount of combustible substances, which, in combination with such equipment, create a fire hazard. Therefore, to safety gas equipment here the requirements are more stringent.

By type of construction, the most suitable for a garage are portable models, because you can change the direction if necessary heat flow. Optimum in a room of this type may be the use of a ceiling gas infrared heater.

Helpful advice! Think in advance about how the gas infrared heater will be maintained and repaired. To all its elements there should be a free approach.

Gas infrared heaters on bottled gas: prices for popular models

Due to the fairly wide popularity, it is not difficult to buy a gas infrared heater from a cylinder.

Prices for some popular models heaters:

If you use reviews as a guide, the Ballu Bigh 55 gas infrared heater is also very good option. It has a high power of 4200 W, and also provides the ability to install a cylinder directly inside the device itself. Of course, this is reflected in its size.

Helpful advice! If you want to purchase a gas infrared heater for a greenhouse, then you need to choose among outdoor models. Room heaters will not cope with this task.

How to make a gas heater for a garage with your own hands

The price of a gas heater for a garage is not always acceptable, and in some cases you have to rely only on own forces. Independent design of heaters has long been tested, and simple and understandable instructions have been compiled for craftsmen.

Here are a few simple rules to keep in mind before you even get started:

1. The main requirement for both factory and home-made gas appliances is safety. Give it as much attention as possible.
2. It is better to purchase ready-made (factory) elements that are responsible for supplying and shutting off gas, as they determine the safety of using the entire structure.
3. The simpler the mechanism of operation of the device, the better.
4. Pay attention to economy, otherwise the use of such a device may cost you dearly.
5. Use inexpensive, but high-quality components that will serve as a reliable basis.

In order to make a high-quality heater with your own hands, you will need the following parts: a sheet of metal, scissors, rivets and a riveter for their installation, a fine metal mesh, a sieve and a gas cylinder. In addition, you can not do without a special burner equipped with a valve.

First of all, you need to attach a heater to the burner. To do this, a sieve attached to a metal sheet is circled with a marker. After that, parallel and perpendicular to each other, you need to draw rectangular ears. In this case, one of them should be 2 times longer than the rest. Then, using scissors for metal, you need to cut out the resulting pattern.

After that, the elements must be fastened together: the burner is attached with bolts to a metal circle that has been cut out. The ears are wrapped in opposite directions, and a strainer is attached to them, which will act as a diffuser. This is a ready-made element of a homemade heater.

Next, you can move on to mounting. metal mesh. For this purpose, it is necessary to once again draw a circle with ears on a metal sheet and then cut it out. Next, you need to fix the mesh, which is attached to the ears of each of the circles, forming a mesh cylinder.

Helpful advice! It is most convenient to fasten with rivets and a riveter. In this case, you need to start by attaching the lower part, and only then go up.

When all the elements are ready, you can connect them together and connect ready product to the power source.

If a independent production the device is beyond your power, then the main thing that you should focus on when choosing a gas infrared heater from a cylinder is customer reviews, as well as those indicated by the manufacturer specifications. Be sure to consider exactly where you plan to use it, as well as for what purpose. If you give a choice suitable model enough time, the purchased device will certainly meet all your expectations.

The basic infrared heater BALLU of the GAS COMPACT series is a modern economical heating device for directional heating. It has absolute efficiency (efficiency = 100%) and does not require any connection to the power supply at all. The BIGH-4 model is excellent for local heating of working areas in open areas where the use of traditional heating methods is ineffective. Possibility of local installation in a place where heating is needed, provides fuel economy.

The thermal radiation of a gas infrared heater, like sunlight, is weakly absorbed by air and reaches the heated surfaces almost without loss. Heat is transferred directly to dense objects (floor, walls, etc.). Infrared heaters operate almost silently, do not overheat the air, do not mix air and dust. The power of the BIGH-4 heater can be continuously adjusted in the range of 3.0–4.5 kW.

The ceramic heater panel undergoes special pre-testing at the factory. Class A is assigned to panels that have successfully passed all tests. The panel is protected by a stainless steel grille.

The device is protected from gas leakage in case of flame failure by means of a gas valve, which is controlled by a sensitive thermocouple. If the wind or other external influence extinguishes the flame, the gas supply will immediately stop.

The body of the panel is covered with heat-resistant enamel. This coating will retain an attractive appearance for a long time and protect the device from corrosion. The detachable leg easily disassembles into 2 parts, allowing you to fold the device into a compact package when not in use.

Main features of household heaters Ballu BIGH-4:

• Heating power either 3.0 or 4.5 kW;
• High quality class A ceramic panel;
• Protective thermocouple for flame control;
• Gas hose with pressure reducer 1.5 m included;
• Smooth power adjustment;
• Directed local heating;
• Complete independence from power supply;
• Absolute efficiency: 100% efficiency;
• High-quality premium-class A ceramic panel does not deform if water accidentally hits the operating device;
• Detachable leg: compact package size;
• Quick preparation for work: gas hose 1.5 m and reducer installed.;

Please note that during operation, the gas heater consumes oxygen. Therefore, it is necessary to ventilate the room in which the heater is used. This ensures the elimination of combustion products and allows the air to be changed in the room.

Warranty: 1 year.
The established service life is 5 years.

The BALLU gas infrared heater of the GAS COMPACT series is a modern economical heater for directional heating. It has absolute efficiency (efficiency = 100%) and does not require any connection to the power supply at all. The BIGH-4 model is excellent for local heating of working areas in open areas where the use of traditional heating methods is ineffective. Possibility of local installation in a place where heating is needed, provides fuel economy. The thermal radiation of a gas infrared heater, like sunlight, is weakly absorbed by air and reaches the heated surfaces almost without loss. Heat is transferred directly to dense objects (floor, walls, etc.). Infrared heaters operate almost silently, do not overheat the air, do not mix air and dust. The power of the BIGH-4 heater can be continuously adjusted in the range of 3.0–4.5 kW. The ceramic heater panel undergoes special pre-testing at the factory. Class A is assigned to panels that have successfully passed all tests. The panel is protected by a stainless steel grille. The device is protected from gas leakage in case of flame failure by means of a gas valve, which is controlled by a sensitive thermocouple. If the wind or other external influence extinguishes the flame, the gas supply will immediately stop. The body of the panel is covered with heat-resistant enamel. This coating will retain an attractive appearance for a long time and protect the device from corrosion. The detachable leg easily disassembles into 2 parts, allowing you to fold the device into a compact package when not in use. Features of the model High-quality class A ceramic panel Safety thermocouple for flame control Gas hose with pressure reducer 1.5 m included Infinite power adjustment Directional local heating Complete independence from the power supply; Absolute efficiency: 100% efficiency; High quality premium A ceramic panel won't warp when accidentally splashed with water Split leg: super compact package size; Quick preparation for work: gas hose 1.5 m and reducer installed. Purpose Primary: local heating of working areas outdoors and open areas. Additional: cleaning surfaces from ice and snow and maintaining them in this state, heating and drying materials. Scope of application Construction areas, sites, open verandas, terraces, gazebos, etc. Model selection Infrared heaters, unlike guns, do not heat the air, but the surfaces of objects and people in the area of ​​action. The heating area depends on the power of the emitting infrared panel and the distance to the heating object. Objects located within a radius of up to 4-6 meters from the radiant panel, depending on the operating conditions, fall within the coverage area of ​​the outdoor heater. The price, appearance, colors, technical characteristics of the goods and completeness may differ from the real ones, check the information at the time of purchase and payment. All information on the site about the goods is for reference only and is not a public offer in accordance with paragraph 2 of Article 437 of the Civil Code of the Russian Federation.