The shoe rack is small. How to make a shoe rack with your own hands. Instructions for assembling a shoe rack with your own hands

11.11.2019

How to save money and make original stand under shoes with your own hands - find out here!ideas, helpful tips, instructions for making.

We make a stylish stand for shoes with our own hands

A beautiful shoe rack can become not only a place to store shoes, but also a full-fledged element of the interior of the hallway. The choice of options in stores is extensive, but the cost is often too high. To make a capacious and compact shoe rack that fits perfectly into the look of the corridor, you need to make a little effort and imagination. Consider options for making shoes from available materials with your own hands.

Varieties and purpose of homemade shelves for the hallway

Before installation, it is necessary to make a measurement of the space where it is planned to put a shelf for shoes. For a small hallway ideal option there will be a narrow (20-30 cm) and high shelf, in a more spacious room a closed cabinet with a width of 60-90 cm will look good.

Should the shelf be closed? If you want the hallway to look more aesthetically pleasing, this is a good option. Do not forget to regularly ventilate a closed shoebox, otherwise you cannot avoid unpleasant odors. Also, this problem can be solved by installing a lamp inside for drying and disinfecting shoes.

The advantages of homemade shoe racks are obvious:

you can use eco-materials;
the cost of a homemade shoe rack is several times less than in a store;
you can make a shelf for the hallway of a non-standard layout.

The design of the shoe rack directly depends on its purpose and the number of residents. Here are some popular and practical options:

Shoe rack design	Description
classical	Shoe shelves of this type are popular because of the simple and convenient installation. May have a conventional rectangular or asymmetric design.
suspended	The shelf is attached to the wall with rails, belts or cables. Conveniently folds if necessary (for example, if you need to carry furniture into a narrow corridor).
corner	Fastening is carried out on adjacent walls. Great space saver.
floor	Support in this design falls on the floor. Suitable for spacious hallways, but can also be compact if the sections are distributed not in width, but in height.
Closed	This option looks more aesthetically pleasing. Doors can be made of plywood, frosted glass.
Cassette	Shoes will be stored vertically here, on the door there are 2 or more cassette-type drawers that slide out when opened. Good for small corridor(width 20-25 cm).

There are many options for making shelves. The interior can be decorated with shelves made of metal, in particular aluminum, processed clay shelves, dense oak, glossy plastic look very nice. The material of manufacture can be any, as well as the configuration of the elements. According to the type of installation, shelves for shoes can be conditionally divided into several types.

Materials and tools for making shelves

The service life and ease of use depend on the material chosen for the manufacture of the shoe rack. For example, making a shelf out of a cardboard box is easier than a lung, but it will not last long either. But, as a temporary option, it will work fine.

When choosing wood as a material, it is worth taking care of the final processing of wood with varnish or paint in order to make it attractive. appearance preserved for a long time. A universal set of tools, due to the nature of installation and material, does not exist. But you will definitely need the following tools:

electric drill;
glue;
simple pencil;
sandpaper;
fastening accessories;
screwdriver;
wood saw;

You will also need varnish or paint, the color of which is selected for the overall interior of the hallway.

How to make a shelf with your own hands

Before starting work, it is worth drawing an approximate layout of the future product, where you also need to specify the dimensions. After that, they start marking on the material, where they indicate the location of the fasteners (if any), the required length and width. Here are a few useful advice:

When creating a simple shoe rack, you can do without the use of metal fittings - all elements are fastened with self-tapping screws.
Doors are easy to install if you use awnings.
The processing of materials with varnish or painting should be carried out before assembly. If you do this after, the layer will be uneven, and the procedure itself will be problematic. The process of assembling a shelf for shoes depends not only on the design, but also on the complexity of processing the material, the features of working with it.

wooden shoe rack

First of all, a shoe rack should have small dimensions, but at the same time contain a sufficient number of pairs of shoes. This is its essential feature. There are many materials from which this structure can be built, but the main one is wood. Unlike chipboard and MDF, it will not stick or swell when exposed to moisture. To do this, the tree should be varnished or painted.

What will be needed?

The basic set for manufacturing: wood, glue, screws, glazing beads, varnish or paint. Of the tools you will need: saw, screwdriver or screwdriver, hammer, sandpaper, drill. Glazing beads, self-tapping screws, drill are selected in accordance with the size of the structure. Self-tapping screws need to choose small, but able to firmly gain a foothold in the structure. It must be remembered that the tree can crack or split if the size of the screws is not chosen correctly.

Construction assembly

In depth, 35 centimeters will be enough. This distance is enough to accommodate almost any shoe. This will be the length of the sides of the structure. You need to saw off 6 elements of 35 cm each. You can determine who in the family has the largest shoe size and measure the distance along it, leaving 1 cm in stock. Then you need to distribute 4 bars on one of the elements and wash down to the depth of the bars. It is necessary to arrange the bars evenly.

Each shelf should allow you to place 3 pairs of shoes, so its length must be determined from the calculation of the 3 largest pairs of shoes in the family. 4 blanks of this length will go to each shelf. To connect the elements, it is necessary to cut out recesses. These places must be fastened with screws. For a more aesthetic look, you can drill holes and use glazing beads and glue that will withstand shoes without any problems. This operation is similar for each shelf. After that, sand the tops of the sidewalls with sandpaper.

Any height can be made, but a reasonable limit is not higher than 80 cm. High shoes should fit in one of the compartments of the structure. The distance between the shelves (between the floor and the first shelf) should be 30 cm. All connections are made in the same way.

Practical shoe rack made of chipboard

To make a simple shelf for shoes from chipboard, you need to take two sheets of canvas (dimensions are determined based on the space in the hallway). You will need a sheet of fiberboard for the back wall. The assembly algorithm is simple:

We attach the bottom and the shelves themselves to the two side walls. A drill is used for screeds (drill 8 mm), a drill with a diameter of 5 mm is used at the end.
The folding element is fixed with medium-sized screws;
Top part mounted on self-tapping screws 4*30;
Shelves are mounted inside;
Fasten back wall products.
This is a budget and uncomplicated option, which can be used for any layout of the hallway.

Beautiful laminate shoe rack

If after the repair of the apartment there is an unused laminate, you can make a stylish and compact shelf out of it, which will organically fit into any design. For manufacturing, you will need laminate sheets, the number of which depends on the tiering and metal pipes with slots. They can be made with a grinder for metal. If desired, the structure can be made of any height; for safety, the edges of the tubes are sealed with plugs.

From profile

An interesting option are shelves for shoes made of profile and tempered glass (or wood). For manufacturing you will need the following tools:

glass cutter;
jigsaw;
Bulgarian;
level;
electric drill for metal;
screwdriver

You can use a regular color profile or galvanized, the second option will be more reliable, as it is resistant to moisture.

Step-by-step instruction

The profile is fixed to the wall with one self-tapping screw;
With the help of the level, the horizontal markup is checked;
Screw in the remaining screws;
The frame is assembled;
Already cut shelves are attached to the frame.
This option will look good in Hi-Teck design.

Simple shoe rack made from boxes

The presented design is able to withstand a lot of weight, despite the fact that cardboard is a fairly flexible material. For its manufacture, it is desirable to use boxes from household appliances. Depending on the height and width, take the required number of boxes. The structure is attached with glue, adhesive tape, a stapler or in another way. The finished shelf can be decorated as fantasy tells. There is one drawback - such a shelf is suitable only for summer shoes.

Corner shoe rack

Most suitable material to create a corner wooden shelf for shoes - larch. It tolerates moisture well and is easy to use.

To begin with, we determine the size and design of the shelf, draw a diagram and calculate the required amount of material.
To create a corner shelf, the following materials and tools are needed:

two boards up to 2 m long (the ends of the boards can be rounded or cut in a wave);
shelves cut from the same board (while the shelves can be cut into different sizes and shapes);
jigsaw for sawing;
planer and sandpaper for leveling;
corners and self-tapping screws for connecting parts;
level to check the accuracy of the design;
antiseptic;
varnish or paint.

Boards must be sanded and treated with an antiseptic, varnished or painted. Varnish is chosen if you want to emphasize the naturalness and structure of wood, paint - if saturated colors are preferred and when deciding to use special design tricks with color play.

Construction connection

To create lightness of construction, the two main boards are not attached to each other: they are set at an angle and connected using shelves. First, the lower shelf is attached, then the upper one, the structure is installed vertically and its evenness and stability are checked. Then the rest of the shelves are installed.

The space between the shelves must be sufficient, otherwise there will be a feeling of tightness and congestion.

decorative elements

For additional decoration of the shelf, you can use thin decorative slats, sawn out on your own. Or purchase a decorative wooden lattice-partition, and after sawing it, decorate the shelf by adding carved limiters.
The use of decoupage or aging techniques in painting will also bring a fresh touch to the interior of the hallway. Bright color solutions may be relevant to complement the interior.

How to do

Workpieces are cut from fiberboard in the form of circles and quadrangles. With the help of a compass and a rail, markings are made for the pins.
Disks for stands are fixed with disks of smaller diameter, which are placed at the desired height.

The bottom is prepared, on which quadrangular blanks are attached, attached with a corner. The bottom circle is conditionally divided into 3-4 parts (a place for 3-4 pairs of shoes on the "floor").

For the manufacture of a shoe shelf, you can connect your imagination and then the most unexpected solutions come to mind. Here are a few ideas that will be interesting not only for self-use, but also as a gift for loved ones.

On the video: do-it-yourself shoe rack from an old closet

Photo gallery

The photo gallery features original solutions shoe rack.

In most cases, a limited space is allocated for this room, which is why it is so important to use it wisely.

In the hallway, it is necessary to provide that each thing has its own place: in this case, you will not spend a lot of time on fees. At the same time, if the clothes are simpler and on hooks, then for shoes and accessories it is better to provide special shelves or in the hallway. They will be discussed in this article.

Homemade shelves for the hallway: purpose and varieties

Shelves differ in the number of compartments for shoes, in style. In addition, they can be both open and closed. They differ in depth, height and a number of other criteria.

One of the most common shoe racks is the so-called. It is a complete stand-alone design.

Advice! Even if the space allows you to place several "shoe racks", it is better to proceed from the fact that exactly as many shoes should fit on the shelves as all family members use in one season. The rest of the shoes are much more convenient to keep in boxes.

Do-it-yourself shoe racks in the hallway: a photo in one or another hallway style

If you make shelves with your own hands, then you have great opportunities to organically fit them into. In this situation, it is much easier to maintain a single style of the room.

Consider which shelves are best suited for one or another popular interior style.

For the now popular shelves made of natural materials are suitable. A tree will look especially appropriate. Such wooden shelves can be decorated with carvings and patterns. A two-tiered model will look very authentic: the shoes themselves are located on the bottom shelf, and on the top - for various accessories and small things. And if this two-tiered shelf is “closed” on top with a “lid”, then it can be used as a convenient one, designed for shoes.

Shelves covered with a lid that slightly extends beyond the edges of the shelves look especially harmonious. Such shelves fit perfectly into. If you are afraid that this functional accessory will look too simple, then keep in mind that this is the main concept of these stylistic trends. If you want something more luxurious for your entryway, then it is better to choose styles like empire, baroque or.

Advice! When using wood, keep in mind that it should be well impregnated and covered with a protective layer.

Brief educational program: "How to make shelves yourself"

You can make shelves for the hallway yourself. To do this, you will need time, patience and the necessary minimum of materials and tools.

It all depends on the material used to make the shelves. If you opted for, then it is advisable to prefer ready-made processed boards, which can be purchased at modern hardware stores. In this case, the manufacture of the shelf will not cause any particular difficulties. However, if you decide to do everything exclusively with your own hands, then you will need the following tools and parts:

plane;
emery;
special glue for wood;
metal corners;
screwdriver or screwdriver;
saw;
self-tapping screws;
roulette;
pencil.

We suggest using the standard wooden board 25 to 35 cm wide and a couple of centimeters thick.

First you need to cut out the vertical side walls. Each of them should turn out to be approximately equal to 80-90 cm. Prepare the support bars, as well as the cross bars. Then proceed to cut out four fragments, which will become shoe shelves. Their size should be approximately 60-70 cm.

Shoes underfoot in the hallway create inconvenience and clutter up the space. Buying a special shelf or even a locker is expensive for many and why, if you can create not only a functional design from improvised materials in the house and garage, but also emphasize the design of the hallway. For assembly, we will use both familiar wood materials and non-standard ones - PVC pipes, pallets and even cardboard.

Depending on what shoes you store in the hallway, the diameter of the pipes will depend. Let's start with more simple option, which is suitable for storing demi-season, summer, children's, as well as home shoes. We use as a basis sewer PVC pipes with a diameter of 110 mm. This is quite enough to accommodate shoes up to size 42. For shoes over size We recommend using pipes with a diameter of 160 or 200 mm. Additionally, for shoes, you will need a hacksaw, a tie belt, an aerosol can of paint. The order of work is as follows:

1. We saw off the desired length of the pipe with a hacksaw. We recommend 30 cm, but you can make the length shorter or longer, everything will depend on the size of the shoes. One such pipe is a cell for one or a pair of shoes. We make as many of these cells as you need to accommodate the entire collection.
2. We grind the sharp edges formed after the cut with sandpaper
3. To better match the shelf with the interior, paint it in the selected color. It is more convenient to work with spray paint, but you can use other materials.
4. We expose the pipes with a pyramid and tighten them with a belt.
5. Insert shoes into each cell and enjoy the result.

Pipes for such a shelf are best fastened with liquid nails

But if you need a more voluminous shelf for shoes in the hallway, we buy sewer PVC pipes with a diameter of 300 mm. It will certainly fit not only shoes and sneakers, but also long boots. We divide the selected pipe into equal sections with a hacksaw and also clean the sharp edges with sandpaper. For decorating compartments, we suggest using paper wallpaper or self-adhesive vinyl. Decorate not only the outside, but also inner part so that the shelf has a complete look. Insulating or fabric tape will help to hide the joints formed along the edges. right size. Next, we fasten the workpieces together using hot glue or bolt fastening. The number of sections in each row is up to you. They can be the same, presented in the form of a pyramid or honeycombs, your imagination is already working here.

Classic wood shelving

A wooden shoe rack is a simple and convenient option. Due to the fact that the tree lends itself well to processing, it is easy to work with it. To achieve the desired shape and size, you will need a planer, grinder, saw, hammer, a set of screwdrivers, as well as a pencil and tape measure for marking. To create shelves, we prepare in advance: wooden bars and strips, self-tapping screws, varnish for opening.

We saw off six equal bars 33 cm long. These will be the sidewalls of the structure, 2 for each shelf. Their length is the depth of the rack, which is enough to comfortably put an adult pair of shoes. On the sides of the sidewalls with a planer we make cuts corresponding to the depth of the long bars on which the shoes will stand. For each shelf, we suggest providing 4 transverse beams about 62 cm long, so that several pairs of shoes can comfortably fit on one tier. We insert long bars into the recesses of the sidewalls and fasten them together with self-tapping screws. We do the same procedure with the rest of the shelves, you choose their number yourself. Sharp edges are sanded with sandpaper.

The optimal distance between each shelf should be at least 25 cm, so that you have the opportunity to place not only short shoes, but also long boots. In our case, the total height of the structure will be a little more than 80 cm, it will consist of three shelves. To connect the shelves, we use wooden planks, we also make cuts in them to the depth of the timber every 25 cm.

In our case, we make the lower cuts at a distance of 25 cm from each other, and the last one after 33 cm. Thus, after connecting the shelves, the upper part of the structure will protrude literally by 7 cm, this is enough. We overlap the upper side planks with a transverse bar, making a side. We grind sharp edges with a machine or sandpaper, open the structure with varnish in several layers. The shoe rack is ready. With your own hands you, where at least three pairs of shoes will fit on one shelf.

In order to make this unusual shelf, you will need plywood and shoe brushes, you can use the old Soviet type. First, let's decide on the dimensions of the upper part. We measure the dimensions of the future shelf. The length of the structure will depend on the number of brushes. We make the depth of the shelf 5 cm more than the width of the brush. We decided on the dimensions, now we cut out two absolutely identical blanks and connect them together with a "book", we get an angle of 90 °. To connect the parts, we step back from the edge of the bottom of the shelf 1 cm and connect both ends with a screw. We do the same with the second side. Next, we cut out two identical squares of plywood, the sides of which correspond to the width of the shelf, and fix them on both sides, closing the corner.

Let's get brushes. If they are with handles, cut them off with a hacksaw, smooth out the rough edges with a file. We drill two holes on each side in each brush, with the help of screws we fasten them to the bottom of the shelf in one or more rows - it all depends on the quantity. The first part of the design is ready, set it aside.

If the brushes have handles, they must be sawn off.

Take another sheet of plywood. It should be equal to the length of the first part, and its width should correspond to the largest shoe size. On average, you will get 35–40 cm, which corresponds to a size 43–44. To make the lower side, we cut out another plank of plywood, equal to the total length and width of 15 cm. We fix both parts at 90 °, connecting the ends according to the same principle as in the first part of the structure. We get a side for shoes.

Now we connect the first and second blank together with screws, paying special attention to the corners. We paint, and when the paint dries, we make two side holes in the back panel for mounting on the wall. Such a shoe rack will fit into any hallway and will not take up much space. Thanks to the brush holders, the shoes will not fall over.

This shoe rack is more difficult. To make it with your own hands, you will need certain carpenter skills, additional tools and materials that may not be in the arsenal. We will analyze two options for a round rotating whatnot with shelves - a regular one and with a soft pouffe for sitting.

Using a jigsaw, we create circles from wooden plates and mark the sections

For the first option, we prepare a wooden slab 12 mm thick and cut it into three equal squares of 70 cm each. These will be the bases for the shelves. If you want to make the bookcase taller, cut out more blanks. square shape We turn the cut plate into a circle with a radius of 35 cm using an electric jigsaw. We cut the plate into equal boards - these are the walls of the sector, each of which will have a pair of shoes. Moreover, they should not be the same in height in each tier. For example, for the bottom shelf they can be made higher, sections for high boots, and the top ones can be made symmetrical for shoes and sneakers. To make the sectors even, with the help of a protractor we mark angles of 60 °, with a ruler we make markings on both sides of the circle. On each line of the sector we nail nails until we bring them to the stop. We apply liquid nails to the markup and fasten the plank, finally fix it on the reverse side with iron nails. So we do with the rest of the shelves.

Doing wooden frame to raise the whatnot above ground level, we connect it to the bottom shelf. Next, paint all the elements in your favorite color, after sanding the edges. We recommend using white paint, and for contrast, make a black border. In order for each shelf to rotate freely, we install turntables between the tiers, fix them strictly in the center, having previously drilled a hole for the bolt and nut.

The final step will be the coloring of the shelf

The second option is a rotating shoe rack with a soft seat. General principle its assembly is unchanged. However, instead of three or more tiers, we recommend making two, adjusting the comfortable seating height. Also, instead of the frame base, you can attach wheels so that the shelf also becomes mobile. We make the upper part of the bookcase soft. We use batting as a base. We cut out two circles from the filler corresponding to the diameter of the shelf, and two more smaller ones, by about 7-10 cm. When laying the batting, we get a ledge. It's upholstery time. We cut the fabric along the diameter of the circle with a margin of at least 5 cm. We fix it around the entire perimeter using a construction stapler. You will learn more about how far to fasten the staples and how to select upholstery material in the article about. We cut off the excess fabric, and to hide the staples, we frame the outline with upholstery tape.

Shelves made of cardboard for shoes, however, like the rest of cardboard furniture, are gaining more and more popularity in interior design. As a basis, ordinary carton boxes, which can be found in the house, perhaps, for everyone. If you don’t have them, think about the nearest store or warehouse where such boxes are lying around idle. In addition to corrugated cardboard, you will need colored wide adhesive tape, scissors, a ruler and a glue gun for work, if you don’t have one, you can use ordinary PVA.

Cardboard rectangles are folded into triangles along the folds

We prepare the cardboard by cutting out a rectangle with sides of 45 × 35 cm. This size will be optimal for both a small and a large pair of shoes. We measure with a ruler 15 cm from each edge and make folds. The sides that we will bend in a triangle are pasted over with colored tape, this will be the central part of the stand. We fold the cardboard along the folds in a triangle, fix it along the edges and center with colored tape. We repeat the same manipulations with all other sections - we choose their number at your discretion. After you make all the sections according to the plan, we proceed to collect the cardboard shelf. We fasten the bottom row of triangles together with colored tape, for reliability we go through the joints with a glue gun. We do the same with the rest of the rows, we fasten them together. At the end of the work, you will get a shoe stand made of triangles. We store shoes in through sections.

Attention, in order for the design to serve you for a long time, shoes should always be dry and clean.

Another budget invention made of cardboard is vertical shelves for shoes. It is easy to make such a design with your own hands. It is ideal for storing slippers, shoes, sneakers and summer shoes in the hallway, does not take up much space. For work, you will need a sheet of cardboard 70 × 60 cm.

We retreat along the length of the cardboard from the edges by 2.5 cm. From these points we measure a vertical line of 25 cm and draw a horizontal segment 20 cm long. We connect the sides, we get a rectangle 25 × 20 cm. A square 25 × 25 cm is formed between the two rectangles. we retreat 11 cm from the upper corners of the square. We draw diagonals to the lower corners of the square and we get two triangles on both sides. We draw a rectangle with sides 35 × 25 cm from the square down. As a result, you should get a T-shaped blank, where the protrusions are two equal rectangles with sides 25 × 20 cm, and the central part is a square 25 × 20 cm and a rectangle 35 × 25 see. We cut off everything superfluous.

To work, you need a large sheet of cardboard

Now we bend the cardboard along the lines, first vertical in the center, and then diagonal. In order not to damage the material, we use a ruler for even bending. After that, we lift the lower rectangle (35 × 25 cm), then the T-shaped top and wrap the diagonal bends for the base on both sides. In the toga, you should get a pocket with triangular ribs on the sides. We fix the bends on the back of the base with ordinary cardboard glue. For reliability, we recommend a glue gun. We make several such shelves-pockets, after which we connect them together by the upper ledge with the same glue. The number of sections is up to you. At will, the shelves can be decorated, painted and upholstered with twine, glued with self-adhesive film. At the end, we make a hole in the last section, hang a vertical shelf on the wall.

Simple shelves from boxes and pallets

You can make a shelf for shoes from boxes that are also found on the farm. For their construction, you will not need to additionally purchase complex parts and tools. If you are the owner of mesh boxes, we fasten them together in a vertical position with a clamp or strong wire. The front of the shelf remains open, put the shoes. We choose the number of tiers ourselves, it all depends on the size and depth of the boxes.

The same can be done with wooden boxes. To fasten them together you will need nails and a hammer. This design will look better if it is sanded and painted wood. If desired, wooden boxes can not be fastened together, but hung on the wall in a chaotic manner.

However, the simplest shoe rack is constructed from a pallet. All you have to do with it is sand it down and repaint it to your desired color. Having installed the pallet in a vertical position, we insert shoes into the gaps between the slats. It will hold up well and won't fall off.

Finishing the plywood theme for myself, I decided to make a stand for shoes. Through pinterest, I went to one interesting store, in which I peeped the idea.

At the time of writing (October 2016), 720 New Zealand dollars is 32,088 Russian rubles.
True, the design had to be slightly adapted to the realities of a family of four, three of whom are girls.

First, I sawed blanks from waterproof birch 18 mm plywood

Stand parts are attached to dovetail. To do this, I made grooves in the appropriate places with a 15.9 mm cutter.

And with the help of a special device (which you can read about here:) I made the corresponding spikes at the ends of the blanks.

The dovetail connection is one of the strongest and is not prone to loosening.

With a straight cutter 19 mm, I made grooves for connecting parts into half a tree.

The sawing-milling stage turned out to be rather short. The cabinet parts are almost ready for assembly.

An important step is grinding. Sanded with 180 and 240 sandpapers.

The outer walls of the stand were assembled on 10 mm beech dowels. To fine-tune the places for drilling, I used small studs, sharpened on both sides.

We hammer nails into one part, position the second one on top and hit it with a mallet. The photo clearly shows the marked places for drilling.

The fit is fairly accurate, although not perfect.

Thus we get the outer box of the stand,

into which we insert internal partitions. This time, due to the simplicity of the design, I decided to do without dry assembly. It turned out to be wrong. While the dovetail joints on the test bars fit perfectly, they were too tight on the cabinet pieces. Therefore, the part with the adhesive already applied had to be assembled using pipe clamps and after that, once again, go through the fixture along the edges of the remaining parts.

After the glue has dried, the final grinding of the edges. After all, it is in them that the whole highlight of plywood furniture.

Coating as always in four layers of varnish residues from the previous project. You can read about the equipment used and the procedure for preparing materials in earlier articles on my blog.

Sanding between coats was done with a 180 grit abrasive pad.

Putting furniture on wheels instead of legs is not just a feature of this project. According to the same Pinterest, this is a trend that many furniture designers follow. In general, this is a great idea - it will be much easier to collect dust in the hallway.

The finished product has a length of 1.6 m and a height of about 0.5 m. The internal useful volume of the cells is 18 cm high, 25 cm wide, and 35 cm deep. Men's winter low shoes size 45 fit perfectly.
I chose the sizes in accordance with my needs and the possibilities of the hallway. Therefore, despite the seemingly monstrous size at first glance, it fits perfectly into the space intended for it.

I must say that we were not able to arrange our shoes into separate cells even in such a large stand. And this despite the fact that all the summer shoes have already been put away in the pantry. I had to put several pairs in some cells. It is difficult to say for whom only six cells in the prototype were designed.
In any case, there is much more order in our hallway.

Read my other articles: littlehobby.livejourmal.com

Each house has its own entrance hall. distinctive features, but there is something that unites them all - it's functionality.

In this context, we can say that every hallway, without exception, has its own shelf for shoes. Moreover, such a piece of furniture can be not only purchased, but also made by hand.

And often homemade shoe racks are the most practical and rational option to use.

Types of shelves for shoes

When choosing a shelf for shoes, it is worth starting from the size of the hallway in which it will be installed. The shoe rack should be beautiful and practical to use.

There are several options for shoe racks. It can be open shelves located at the bottom of the wall.

The topmost shelf in this case can be used as a bench. Above them are usually hooks for clothes.

Also shelves for shoes can look like a closet. In the lower part of such cabinets, there are, in fact, the shelves for shoes with doors.

Sometimes there are also drawers for various little things. The top of the closet is used for clothes. There may be shelves in the closet designed for other items, such as hats and gloves.

A common option is also a cabinet for shoes. Such a single-standing design does not take up much space and is suitable even for small hallways. In such a cabinet, the doors do not swing open, but recline. But it is worth remembering that shoes are stored in them already put in order.

shoe rack material

Wood is the most popular material in the manufacture of any furniture, including shoe racks. It is affordable and easy to process. Also, shoe shelves can be made of metal and plastic.

Metal shelves have several advantages over wood. Metal does not absorb odors. And also due to the fact that the metal shelves have a rack or mesh design, the shoes will be naturally ventilated.

The metal is not subject to decay, and if it is treated with appropriate means, it will not rust.

The plastic shelf always has an open view, and in this regard, you can only choose the number of shelves in the rack. In addition, often such shelves are not strong enough structures. Although their indisputable advantage is lightness and the ability to wash.

shoe rack ideas

The most popular are the classic open shelves for shoes. You can free up space on the floor by making such shelves suspended. Also, you can not hang the entire shelf to the wall, and make separate cells for each pair of shoes.

A shelf made in the form of a hanger or pockets on the wall can look very original.

If you have a lot of pairs of shoes in your wardrobe, or a large family, and everyone needs somewhere to put their shoes, then a rotating round rack is for you.

Also in such cases, a high shelf will help out, which can be used not only for its intended purpose. On such a shelf you can put handbags, a glove or umbrellas.

In order to make the interior of the hallway neat, it is recommended to choose closed shelves or shelves with doors. And if special storage boxes are placed on open shelves, this will make the hallway neat.

Self-made shoe racks can be of the most bizarre shapes. And you can make them from improvised things.

This option can be attached to the wall wooden pallet, facing the horizontal beams into the room.

A shelf made of pipe scraps fastened together looks very unusual. In general, the options for homemade shoe racks are limited only by your imagination. The man himself.