\Typical job description for an electrician for repair of the 2nd category

Job description Electrician for repair of the 2nd category

Position: Electrician for repairs of the 2nd category
Subdivision: _________________________

1. General Provisions:

Subordination:
• The electrician for repair of the 2nd category directly reports to ..............................
• The electrician for the repair of the 2nd category follows the instructions .............................................. .............

(instructions of these employees are carried out only if they do not contradict the instructions of the immediate supervisor).

Substitution:

• Electrician for repair of the 2nd category replaces .............................................. .........................................
• The electrician for repair of the 2nd category replaces .............................................. ...............................................

Recruitment and dismissal:
The repair electrician is appointed to the position and dismissed by the head of the department in agreement with the head of the department.

2. Qualification requirements:

Must know:

• the principle of operation of serviced electric machines, electrical appliances and electric vehicles of rolling stock
• purpose and rules for the use of the most common universal and special devices and used control and measuring tools
• wiring methods
• simple wiring diagrams for connecting parts and assemblies
• rules for switching on and off electrical machines and devices
• fundamentals of electrical engineering and metal technology in the scope of the work performed.

3. Job responsibilities:

• Dismantling, repair and assembly of simple assemblies, devices and fittings of electric lighting using simple hand tools and tools.
• Cleaning, washing, wiping and blowing compressed air parts and devices of electrical equipment.
• Manufacture of simple parts from high-quality metal.
• Connection of parts and assemblies of electrical machines, electrical appliances according to simple wiring diagrams.
• Installation of couplings, tees and boxes.

p. 1 Job description Electrician for repair
p. 2 Job description Electrician for repair

4. Rights

• The repair electrician has the right to give instructions to his subordinate employees, tasks on a range of issues included in his functional duties.
• The electrician for repairs has the right to control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him.
• The repair electrician has the right to request and receive necessary materials and documents related to the issues of its activities and the activities of employees subordinate to it.
• The repair electrician has the right to interact with other services of the enterprise on production and other issues that are part of his functional duties.
• The repair electrician has the right to get acquainted with the draft decisions of the management of the enterprise relating to the activities of the Division.
• The repair electrician has the right to propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description.
• The repair electrician has the right to submit proposals for the consideration of the head of the proposal to encourage distinguished employees, to impose penalties on violators of production and labor discipline.
• The repair electrician has the right to report to the manager on all identified violations and shortcomings in connection with the work performed.

5. Responsibility

• The repair electrician is responsible for the improper performance or non-performance of his official duties provided for by this job description - within the limits determined by the labor legislation of the Russian Federation.
• The electrical repairman is responsible for violating the rules and regulations governing the activities of the enterprise.
• When transferring to another job or dismissal from office, the Electrician for Repair is responsible for the proper and timely delivery of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.
• The repair electrician is responsible for offenses committed in the course of his activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
• The repair electrician is responsible for causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
• The electrician repairer is responsible for complying with applicable instructions, orders and orders to maintain trade secrets and confidential information.
• The repair electrician is responsible for the implementation of internal regulations, safety and fire safety rules.

This job description was developed in accordance with (name, number and date of the document)

Head of structural

State budgetary educational institution higher professional education

"Volgograd State Medical University"

Ministry of Health of the Russian Federation

(GBOU VPO VolgGMU of the Ministry of Health of Russia)

APPROVED: Vice-rector for administrative and economic work GBOU VPO VolgGMU of the Ministry of Health of Russia,

__________________

"___" _______________ 20__

Job description

electrician for repair and maintenance of electrical equipment 2nd category

_____________________________________

name of the structural unit

FULL NAME ___________________________________________

1. General Provisions

1.1. E belongs to the category of workers.

1.2. For the position of an electrician for the repair and maintenance of electrical equipment, 2nd category a person with a specialized secondary education is appointed.

1.3. E electrician for repair and maintenance of electrical equipment 2nd category reports directly to the head of the structural unit.

1.4. E electrician for repair and maintenance of electrical equipment 2nd category must know:

· device and principle of operation of electric motors, generators, transformers, switching and ballast equipment, batteries and electrical appliances;

· main types of electrical materials, their properties and purpose;

· rules and methods of installation and repair of electrical equipment in the scope of work performed;

· name, purpose and rules for using the applied working and measuring tools and basic information about the production and organization of the workplace;

· techniques and methods for replacing, splicing and soldering low voltage wires;

· first aid rules in case of injury electric shock; safety regulations for the maintenance of electrical installations in the scope of qualification group II; methods and sequence of rigging operations.

2. Job responsibilities.

· Performing individual simple work on the repair and maintenance of electrical equipment under the guidance of an electrician of a higher qualification.

· Installation and repair of junction boxes, terminal blocks, safety shields and lighting fittings.

· Cleaning and purging with compressed air of electrical equipment with partial disassembly, washing and wiping of parts.

· Cleaning contacts and contact surfaces.

· Cutting, splicing, insulation and soldering of wires up to 1000 V.

· Laying of installation wires and cables.

· Maintenance and repair of solar and wind power plants with a capacity of up to 50 kW.

· Performing simple plumbing, assembly and carpentry work in the repair of electrical equipment.

· Connecting and disconnecting electrical equipment and performing simple measurements.

· Work with pneumatic and electric tools .

· Performance rigging using simple lifting equipment and cranes operated from the floor.

· Checking and measuring the insulation resistance of distribution networks of stators and rotors of electric motors, transformer windings, inputs and outputs of cables with a megohmmeter.

3. Functional responsibilities .

4. Rights.

E electrician for repair and maintenance of electrical equipment 2nd category has the right to:

Submit proposals for improvement of the work. To use free of charge the services of the library, information funds, educational and scientific departments, as well as the services of social, medical and other structural departments of the university. In the prescribed manner, appeal against orders, orders of the rector and other organizational and administrative acts of the university administration.

5. Responsibility.

E electrician for repair and maintenance of electrical equipment 2nd category responsible for:

Violation of the rules on labor protection and industrial sanitation.

· Inadequate provision of fire safety and implementation of fire-fighting measures in assigned premises.

· Failure to ensure safe working conditions for workers.

· Failure to fulfill the obligations stipulated by the Charter of the University, current legal acts and job description.

· Other violations provided for by the Labor Code of the Russian Federation in the course of performing their official duties.

6. Relationships

E electrician for repair and maintenance of electrical equipment 2nd category accepts for execution the instructions of the rector, expressed orally or in writing.

E electrician for repair and maintenance of electrical equipment 2nd category accepts for execution, expressed orally or in writing and directly addressed to him, the instructions of the vice-rector for administrative and economic work.

Head of the structural unit ______________________ Full name

Head of Human Resources Department ________________________

Legal Counsel ____________________________

Familiarized with the job description (a), a copy received _____________ full name

“____” ___________ 20___

The modern world is hard to imagine without machines and mechanisms that work with electricity. The quality of its delivery is also improving. For example, aluminum conductors were replaced with copper ones, non-combustible insulation was invented. Production facilities began to be divided into zones according to the principle of fire safety. The idea is simple: a fire that has arisen in one zone cannot move to another. The need for qualified specialists who keep up with the times is growing at the same rate. What should an electrician know?

Who is an electrician?

A specialist who has received a special education and works in the field of electronics is called an electrician. That is, this is an employee who knows the basics of electrics, whose main occupation is installation, repair and operation. electrical equipment. Repair and installation work can be carried out not only indoors, but also on the street, including at height. In addition to basic skills, an electrician can always provide first aid victim of electric shock.

The main task of an electrician is to organize the uninterrupted operation of electrical networks. Both in production or residential premises, and on the streets or in production processes.

Main professional quality electrician - accuracy, responsibility, vigilance, caution, attentiveness and concentration.

Professional responsibilities

This profession in our country is quite common, and job descriptions are formed quite clearly:

• conducting electrical wiring or power cables;
• connection of electrical equipment with preliminary calculation of cables;
• drawing up a plan for the electrification of industrial or residential premises;
• installation of new electrical networks, repair and dismantling of failed ones, etc.

The studied fundamentals of electrics enable a specialist to install control or protection devices, insulators, mark equipment installation points, troubleshoot short circuits, and lay cable channels. And also measure the resistance of insulating materials, conduct preparatory work before turning on the mechanisms for the first time, install and dismantle alarm or protection systems, connect wires, cables, couplings, etc.

Electrical Basics

The work of an electrician requires a large amount of knowledge. Elementary course: "Electrics for Beginners" provides an opportunity to study:

• basic concepts and quantities used in electrics;
• symbols used in electrical circuits;
• materials and their electrical conductivity;
• marking of cables, electrical circuits and wires;
• ways and wires;
• methods for obtaining contacts and other connections;
• rules for the device and protection of electrical installations;
• ways to connect generators and engines;
• the order of protection against overloads of electrical circuits;
• existing types of electrical wiring and methods of its installation;
• basics of safety precautions when carrying out electrical installation work;
• rules for first aid in case of electric shock.

So, what does a novice electrician need to know? The basics of electricity are the main base of the future electrician. But besides this, it is necessary to have a good command of the basics of applied mechanics, automation and electrical engineering.

Required level of knowledge

The basics of electrics are the bare minimum that an electrician needs to work. Here are a few categories that a modern electrician is required to have information about.

1. The direct appointment of a device or mechanism that needs repair.
2. Frequent problems with a particular device.
3. Rules for the operation of a non-working mechanism or device,
4. Fundamentals of safety in electrical work.

If there is a need to repair the wiring, the electrician must know and present in detail its circuit, as well as be able to diagnose the causes of failure.

Skills

Training as an electrician instills the necessary techniques in the work. A specialist learns to read circuit diagrams and wiring diagrams, to expect to work with measuring instruments, to independently assemble simple electrical circuits, carry out soldering or twisting the assembly of contact connections.

Main instrument

The necessary equipment for the work of an electrician is divided into four categories:

• hand tool;
• power tool;
• measuring instruments;
• consumables and accessories.

Kit hand tool individual for each electrician. But there is a necessary base. Having completed training as an electrician, a young specialist will be familiarized with how to work with pliers (nippers), a mounting or utility knife, a set of screwdrivers and wrenches, hammer, chisel, construction tape measure, stripper and electric soldering iron.

If the production of electrical work requires more serious intervention, then you will definitely need a puncher with an adapter cartridge and a set of nozzles, a grinder for cutting steel corners for a grounding system or laying a strobe under cables. You will also need an electric drill, which, if necessary, can work as a screwdriver.

As follows from the course "Electricians for Beginners", measuring instruments today perform many functions and they are necessary in work. One of the main ones is a probe for the presence of a phase in electrical network. It looks like a screwdriver, but the case is not durable, because the device has a different purpose. More information can be read from a universal multimeter. In addition to basic measurements, it is able to check the correctness of installed equipment or laid networks. make it possible to connect without interrupting the network and take measurements.

Auxiliary devices are not included in the list of mandatory, but greatly facilitate the work of a specialist. It can be a ladder, a carrier, an autonomous light source, markers, building pencils, levels, calipers, etc.

An electrician of the 2nd category for maintenance of electrical equipment and networks must be able to: 1) maintain power and lighting electrical installations with simple switching circuits; 2) perform simple work at departmental power plants, transformer power plants with their complete disconnection from voltage under the guidance of electricians of higher qualification; 3) to check and scheduled preventive maintenance of the serviced equipment; 4) determine the cause of the malfunction and eliminate simple damage in power and lighting networks, ballasts and electric motors; 5) cut, splice, solder and insulate wires for voltage up to 1000 V; 6) charge, install simple lighting fixtures (normal and dustproof with incandescent lamps), switches, socket outlets, wall lamps and industrial spotlights; 7) check the insulation resistance of electrical installations with a megohmmeter; 8) install and adjust electrical devices alarms; 9) properly organize and maintain workplace, economically spend materials, tools and electricity; 10) comply with safety regulations, labor hygiene, fire regulations, internal regulations; 11) apply when maintenance electrical equipment the most expedient and modern methods of labor organization. An electrician of the 2nd category must know: 1) the basics of electrical engineering; 2) the principle of operation of electric motors, generators, transformers, control equipment and measuring instruments; 3) electrical materials, their properties and purpose; 4) methods of splicing and soldering of low voltage wires; 5) rules for switching on and off electric motors; 6) rules for first aid in case of electric shock; 7) power supply scheme and equipment location. vania in the serviced area; eight) general information about relay protection and types of relays; 9) rules for charging and installing lighting fixtures; 10) the purpose and conditions for the use of the most common universal and special devices, instrumentation; 11) the basics of organizing the economics of production and NOT; 12) Basic information on standardization and quality control of products; 13) reasons for marriage; measures for its prevention and elimination; 14) safety regulations, fire safety and internal regulations; 15) rules of labor hygiene and industrial sanitation.
Requirements for certification of electricians for the maintenance of electrical equipment and networks for the 3rd category
Electrician of the 3rd category in addition to the requirements provided for qualification characteristic electrician of the 2nd category, must be able to: 1) maintain power and lighting electrical installations with switching circuits of medium complexity; 2) perform simple work at departmental power plants and transformer substations with their complete disconnection from voltage; 3) carry out operational switching in power networks, revision, transformers, switches, disconnectors and drives to them without disassembling structural elements; 4) regulate the load of electrical equipment in the service area; 5) check the condition of the insulation with a megohmmeter and measure the value of its resistance in electric motors, transformers and cable networks; 6) identify and eliminate malfunctions and damage to electrical installations; 7) cut, splice, insulate and solder wires with voltages above 1000 V; 8) maintain, install and turn on electrical measuring instruments and electricity meters; 9) maintain and repair electric motors with a power of up to 100 kW, ballasts of switchgears with a voltage of up to 1000 V; 10) charge and maintain complex lighting fixtures (explosion-proof) with incandescent lamps and install fluorescent lamps.
An electrician of the 3rd category must know: 1) the device of serviced electric motors, generators, transformers, switchgear equipment, electrical networks and electrical appliances, oil switches, fuses, contactors, batteries, static capacitors, controllers, rectifiers; 2) rules and regulations for testing winding insulation with a megohmmeter; 3) techniques and methods for splicing and soldering high voltage wires; 4) basic requirements for relay protection; 5) methods of finding and troubleshooting in electrical networks and electrical machines; 6) principles of operation of rheostats, autotransformers, electric drives with semi-automatic control; 7) definition allowable loads for transformers, electric motors, cables and wires; 8) the device of universal and special devices, simple and medium complexity instrumentation.

Training of personnel of electrical installations

Personnel servicing electrical installations, before being assigned to independent work or when transferring to another, must undergo on-the-job training. This also applies to personnel who have had a break in work for more than 6 months. Classes are conducted by an experienced worker from the electrical personnel of the enterprise, to which the student is attached by order or order for the enterprise, workshop, section. After completing the training, the trainee in a special commission passes a test of knowledge according to the rules technical operation, rules technical security, job and operational instructions, technical minimum for serviced equipment.
After checking the knowledge, each employee of operational and operational-repair personnel must undergo an internship for an acting person at the workplace lasting at least 2 weeks under the guidance of an experienced employee. This is not required for maintenance personnel.
Periodic testing of knowledge of PTE, PTB and production instructions produced once a year - for personnel directly servicing existing electrical installations, conducting adjustment, electrical installation, repair work or preventive tests, as well as the personnel who issue orders and organize these works.
Persons who have violated the PTE, PTB or production instructions are subjected to an extraordinary knowledge test.
In case of an unsatisfactory assessment of knowledge of PTE, PTB, a re-check is carried out within the time limits established by the qualification commission, but not earlier than after 2 weeks.
Personnel who showed unsatisfactory knowledge during the third test are transferred to other work not related to the maintenance of electrical installations.
If the expiration date of the certificate falls on the time of vacation or illness of the personnel, it is allowed to extend the validity of the certificate for 1 month. without special design.
The validity period of the certificate of a person who is re-passing a knowledge test in connection with receiving an unsatisfactory grade \ is extended by the qualification commission until the deadline set for the second or third test, unless there is a special decision of the commission on the temporary removal of this person from work in electrical installations.
The knowledge of PTE and PTB is checked by electrical personnel of small enterprises, carried out by a commission created under a higher organization, with the participation of the head of the enterprise, organization, institution where the person being checked works.
Each employee who has successfully passed the test is issued a certificate (form 1) with the assignment of a qualification group
on safety (II-V). The certificate gives the right to service electrical installations.
Page 1 Form 1
Certificate of verification of knowledge of PTE and PTB during the operation of consumer electrical installations
Company name................................................ ................................................. ..
Page 2 Certificate No.
Tov................................................. ................................................. ................................................. .....
Position........................ ......................... ................................................. .........................................
Approved for work in electrical installations with voltage .............................................. .................
Workshops, departments ............................................... ................................................. .................... . . . . .
As................................................ .staff.................................................................. ......................
Date of issue................................................ ................................................. ................................................
m. p. The person responsible for the electrical facilities .............................. Signature. . . .
Page 3. Knowledge test results

Page 4. Certificate for the right to conduct
special works

Page 5. Memo. Knowledge testing is carried out at least once every 3 years.
Without a seal and marks on the results of verification and signatures is not valid.
Access to independent duty or independent work in electrical installations, they are issued by a special order for the enterprise, workshop, site.
In order to master the most advanced methods of work for personnel, to increase knowledge on the device and operation of equipment, the following is organized:

1. course (group, individual) training for advanced training;
2. study of PTE, PTB, PUE instructions and other rules related to the operation of these installations;
3. carry out emergency response drills at workplaces to train operating personnel best ways and methods of rapid prevention and elimination of malfunctions and accidents;
4. periodically (at least once a quarter) conduct production briefings directly at the workplace to train personnel in the correct and safe care of equipment, rational working methods.

Electrician for the repair and maintenance of electrical equipment 2nd category Characteristics of work. Performing individual simple work on the repair and maintenance of electrical equipment under the guidance of an electrician of a higher qualification. Installation and repair of junction boxes, terminal blocks, safety shields and lighting fittings. Cleaning and purging with compressed air of electrical equipment with partial disassembly, washing and wiping of parts. Cleaning contacts and contact surfaces. Cutting, splicing, insulation and soldering of wires with voltage up to 1000 V. Laying of installation wires and cables. Maintenance and repair of solar and wind power plants with a capacity of up to 50 kW. Performing simple plumbing, assembly and carpentry work in the repair of electrical equipment. Connecting and disconnecting electrical equipment and performing simple measurements. Working with pneumatic and power tools. Lifting operations using simple lifting equipment and cranes operated from the floor. Checking and measuring the insulation resistance of distribution networks of stators and rotors of electric motors, transformer windings, inputs and outputs of cables with a megohmmeter.

Electrician for the repair and maintenance of electrical equipment 2nd category Must know: the design and principle of operation of electric motors, generators, transformers, switching and control gear, batteries and electrical appliances; main types of electrical materials, their properties and purpose; rules and methods of installation and repair of electrical equipment in the scope of work performed; name, purpose and rules for using the applied working and measuring tools and basic information about the production and organization of the workplace; techniques and methods for replacing, splicing and soldering low voltage wires; rules for first aid in case of electric shock; safety regulations for the maintenance of electrical installations in the scope of qualification group II; methods and sequence of rigging operations.

Work examples.

Lighting fittings: switches, socket outlets, cartridges, etc. - installation with network connection.

Inputs and outputs of cables - checking the insulation resistance with a megohmmeter.

The details are simple - coil springs, brackets, jumpers, lugs and contacts - fabrication and installation.

Illumination - installation.

Cables and wires - cutting ends, crimping and soldering tips.

Structures made of steel and other metals for electrical appliances manufacturing and installation.

Contactors, relays, controllers, command devices - checking and tightening fasteners, cleaning and filing contacts, replacing and lubricating them, replacing arc extinguishing devices.

Household electrical appliances: stoves, irons, etc. - dismantling, repair and assembly.

Wires and cables (overhead) - installation, dismantling, repair and replacement.

Welding transformers - disassembly, simple repair, assembly, terminal shield installation.

Socles of electric lamps - soldering ends.

Shields and distribution boxes - change and installation of fuses and circuit breakers.

Power or lighting network shields with a simple scheme (up to eight groups) - manufacturing and installation.

Electric motors and generators - partial disassembly, cleaning and blowing with compressed air, lubrication, replacement of brushes.

Grounding electrodes - installation and driving.