Ultra-thin thermal insulation brand armor. What does Bronya ultra-thin thermal insulation consist of and how does it work? Coating armor
- revolutionary technology of warming! Ultra-thin thermal insulation, which has no analogues in terms of thermal protection efficiency!
Thermal insulation paint Bronya
can change our understanding of traditional ways and technologies for home insulation, thermal insulation of pipes and engineering equipment.Modern developments in the field of increasing the efficiency of heat-insulating materials have allowed scientists to create a truly universal heat-insulating coating that surpasses all known insulating materials in its characteristics!
Judge for yourself - only 1 mm of thermal insulation coating Bronya is equivalent in terms of thermal protection to 50 mm of mineral wool!
40 times more effective than foam or polyurethane foam, but these are not all the benefits of liquid thermal insulation.
Advantages of liquid thermal insulation Bronya:
- environmental safety, lack of harmful impurities in the composition of the material
- fire safety, the absence of harmful fumes and gases, when the heat-insulating material is heated
- high efficiency of thermal protection with a small thickness of insulation
- durability, not subject to rotting and getting wet
- biological resistance, not susceptible to mold damage
- Easy to apply on all types of surfaces
- low cost
Ultra-thin heat-insulating coating Bronya is an ideal insulation of a new generation!
In the philistine environment, and among the builders themselves, there is enough a large number of skeptics who claim that liquid ultra-thin thermal insulation is a figment of the imagination of marketers. From the point of view of such "experts", a heat-insulating material with such performance indicators cannot exist in principle. Such skeptics should be reminded that just recently no one could believe that a man could fly into space, but it happened! Exactly the same revolutionary, breakthrough technologies are being developed in all areas of human activity, including the creation of the latest insulating materials, such as liquid insulation.
Superfine Thermal Insulation Bronya proved its high efficiency not only in experiments and numerous tests in laboratory tests, when obtaining certificates from the leading institutions of the country, but also in practice, with practical use at hundreds of critical construction sites.Liquid thermal insulation Bronya is successfully used at the facilities of such giants as GAZPROM, RZD, ROSNEFT, LUKOIL, as well as in housing construction, housing and communal services, industrial facilities, etc. Getting more and more popular liquid insulation Armor and among private developers.
Those who have used Bronya heat-insulating paint at least once recommend it to all their friends as a unique heat insulator!
liquid insulation
highly effective for thermal insulation of facades of buildings, roofs, internal walls, window slopes, concrete floors, pipelines for hot and cold water supply, steam pipelines, air ducts for air conditioning systems, cooling systems, various containers, tanks, trailers, refrigerators, etc.
Technical characteristics of liquid thermal insulation Bronya:
. Coefficient of thermal conductivity
- 0.001 W/m °С (at +20°С)!
. Temperature range of application
from -60 to +250 °С
. Environmentally safe, non-toxic, do not contain harmful volatile organic compounds.
. High chemical resistance to alkalis, saline solutions, etc.
. Fire and explosion safety
.
Service life - more than 30 years
, without changing the insulating properties!
Areas of application for liquid thermal insulation Bronya:
- Insulation of walls, floors and roofs of residential and industrial buildings
- Thermal insulation of metal structures and structures
- Insulation of hangars, warehouses and garages
- Thermal insulation of pipelines of heating systems
- Thermal insulation of steam and gas pipelines
- Thermal insulation of air conditioning systems
- Elimination of condensate on pipes with cold water
- Thermal insulation of water heaters and boilers
- Thermal insulation of steam boilers and heat exchangers
- Insulation of oil pipelines - underground and surface, oil storage
- Thermal insulation of containers and tanks for storing water, chemicals, etc.
- Thermal insulation of refrigerating chambers
- Thermal insulation of refrigerators, automobile and railway tanks
- Passenger railway cars and subway cars (heat and sound insulation)
- Engine rooms of ships
- Internal surfaces of the hull of ships, submarines, boats, yachts, etc.
Range of thermal insulation coatings Bronya:
1. Ultra-thin thermal insulation Armor Standard - basic modification of ultra-thin thermal insulation coatings Bronya is the most economical option for thermal insulation of any building structures!
- 2. Thermal insulation paint Bronya Classic- the basic modification of an ultra-thin liquid-ceramic coating, which has excellent adhesion to any surface! The best ultra-thin thermal insulation you will ever work with!
3.
insulating coating
Armor Antikor- a unique ultra-thin heat-insulating coating, insulation paint, which can be applied directly to a rusty surface (it is enough just to remove loose rust with a metal brush).
Liquid thermal insulation Bronya Anticorrosive is a highly effective thermal insulation coating and anti-corrosion protection at the same time!
4. Thermal insulation paint Armor Winter - unparalleled modification, specially designed for work in winter period at negative temperatures. Unlike all other liquid ceramic coatings presented on Russian market, work on applying Bronya Zima can be carried out at negative temperatures, up to -30 ° С.
5.
Thermal insulation paint
Bronya Facade -
a unique heat-insulating coating that can be applied in layers up to 1 mm thick at a time, and has an increased vapor permeability of high-quality facade coatings.
- 6.
Heat-insulating putty
Bronya Light -
innovative heat-insulating coating, heat-insulating putty for construction and finishing works, designed for finishing leveling of internal and external surfaces made of concrete, brick, cement-lime plasters, gypsum blocks and slabs, gas and foam concrete, gypsum boards, gypsum boards, etc. , with operating temperature from -60 to +150 °С.
Heat-insulating putty Bronya Light is a unique construction material, which is based on the use of the latest thermal insulation components.
7. Flame retardant Armor Fire protection - a one-component fire retardant coating designed to increase the fire resistance steel structures and structures for industrial and civil purposes. Fire protection of metal structures can now be performed reliably and very simply - by ordinary surface painting! The fire resistance of structures in this case increases from 45 minutes to 120 minutes! Fire-retardant paint Bronya Fire protection is the latest development in the field of modern methods of fire protection of structures.
8.Thermal insulation coating Armor Wagon and Bronya Universal NG - Bronya Classic and Armor Standard.
The development of this modification of liquid thermal insulation was caused by the need to offer a cheaper alternative to the already widely known and popular Bronya Classic coatings. As a result, it was possible to obtain a heat-insulating coating with similar heat-shielding properties, but much more economical in terms of cost -20% cheaper!
9.Thermal insulation coating Bronya Sten and Bronya Sten NG - this is a budget ultra-thin thermal insulation that has similar characteristics to ultra-thin thermal insulation coatings Bronya Facade.
A cheaper alternative to the already well-known and sought-after Bronya Facade coatings. Our technologists managed to obtain a heat-insulating coating not only with similar heat-shielding properties, but also significantly more economical in terms of cost -20% cheaper!
10.Ultra-thin thermal insulation Bronya Nord and Bronya Nord NG - this is a budget ultra-thin thermal insulation that has similar characteristics with a thermal insulation coating Armor Winter.
A cheaper alternative to already widely known and sought after coatings Armor Winter. Thanks to new technology and innovative components, it was possible to obtain a heat-insulating coating not only with similar heat-shielding properties, but also significantly more economical in cost -20% cheaper!
11.insulating coating Armor Metal - this is a budget ultra-thin thermal insulation that has similar specifications with modificationArmor Antikor.
The development of this modification of liquid thermal insulation is caused by the need to offer a cheaper alternative to the already widely known and popular coatings Bronya Antikor. As a result, it was possible to obtain a heat-insulating coating with similar heat-shielding and anti-corrosion properties, but much more economical in terms of cost -20% cheaper!
12.insulating coatingBronya Anticondensate
PRO-
applied directly to the condensing surface!
Other news
Anti-condensate insulating coating Bronya Anti-condensate is designed specifically for use in construction, industry, reconstruction and repair of equipment. The uniqueness of the anti-condensation coating lies in the fact that it is applied directly to the wet surfaces of pipelines and equipment of various shapes, which are in working condition, when it is impossible to stop technological process, or supply of liquids through pipelines.
read
The term "ultra-thin thermal insulation" refers to a group of paints filled with ceramic microspheres with rarefied air inside, most often acrylic-based. This heater has unique characteristics: with a minimum weight load, it completely covers building construction while protecting them from moisture and corrosion. Recognized leader in this field - paints and suspensions Armor of domestic production.
It is a homogeneous suspension white color, forming after drying a matte film with high density and resistance to most external influences. The insulation effect is achieved due to the preservation of heat inside the ceramic granules, elasticity - due to the acrylic base, other parameters - by the introduction of catalysts, anti-corrosion and antiseptic additives. Depending on the intended purpose (specific functions are indicated in the table below), cost and properties, 11 modifications of Bronya thermal insulation compounds are distinguished:
- Basic: Classic, Facade, Winter, Anticorrosive.
- Budget: Station wagon, Wall, Nord, Metal (brands with similar characteristics, but cheaper).
- Specialized: Standard, Light, Fire protection.
The main technical characteristics of thermal insulation:
- The coefficient of thermal conductivity is 0.0012 W / m K according to the manufacturer's statement.
- Vapor permeability - 0.001 mg / m h Pa for Bronya Classic, Antikor and 0.013 for brands that are recommended to be purchased for thermal insulation of facades and walls.
- The average density of the composition is 0.558 g/cm3.
- Frost resistance - up to 50 cycles without changing the appearance of the coating.
- Combustibility group - NG and G1, depending on the form of release.
- Adhesion to the base: 1.33 MPa - to cement mortars and concrete, 2.04 - to brick, 2.3 - to metal.
- Standard operating temperature range: from -60 °С to +200 (up to 140 for budget modifications).
- The service life of Bronya insulation is at least 15 years.
The consumption of liquid thermal insulation declared by the manufacturer is 1 liter per 1 m2 with a thickness of the applied layer of 1 mm, reviews confirm it. This indicator strongly depends on the quality of preparation and evenness of the working base. The minimum drying time for a thin layer of Bronya paint is 1 hour, it takes a day to fully harden.
Due to its high adhesion, ultra-thin thermal insulation is optimal for insulating pipe lines, metal containers and surfaces, according to reviews in this regard, it is better and more convenient than rolled mineral wool. The scope of application is practically unlimited and includes horizontal, vertical and inclined structures inside and outside residential and industrial buildings. Bronya paint is recommended to buy for thermal insulation of slopes, facades, roofs, floors, ventilation, water heaters, tanks, cold rooms and similar objects. According to reviews, the maximum effect is achieved when insulating hard-to-reach and space-limited systems, including underground ones.
Work begins with surface preparation: removal of loose areas, old coatings, rust removal, degreasing or dedusting. This insulation has good adhesion to any building materials, but laying on an uneven or unstable base unnecessarily increases consumption. The paint holds better if the plane is pre-treated with Bronya primers. The composition is applied to clean and dry structures using an airless sprayer with a pressure of 60-80 bar or a brush with soft natural bristles.
Immediately before installation, the liquid thermal insulation is mixed (by hand or with a construction mixer) and, if necessary, diluted (exclusively with distilled water). The process requires care, it is important to leave the microspheres intact. The volume of injected liquid is limited: with manual staining, it should not exceed 5%, with mechanized - 3. The same applies to external parameters: when carrying out thermal insulation work under conditions high humidity It is better not to dilute the paint with anything. Ignoring these requirements leads to an increase in the drying time of the layer and is considered a violation of technology. An exception is made only for preliminary application (when the main Bronya composition is used as a primer), in this case up to 30% of water is introduced.
The specific conditions of work and the recommended layer thickness depend on the brand, but it is better to apply an ultra-thin coating of thermal insulation several times than once, but thickly. According to reviews, to achieve the correct subtlety, you need to perform quick and short strokes. The number of layers of insulation Armor is determined by a special calculation, but at least the optical thickness should be reached (0.5 mm, walls or structural elements do not shine through the paint), the maximum is 6 mm. Each subsequent layer is performed only after the previous one has completely dried.
Overview of reviews
“I bought Bronya Universal heat-insulating paint when insulating a balcony, it took me 15 liters for 14 m2. I applied it after sealing the cracks, in one layer with an ordinary soft brush. The thickness was no more than 1 mm, which helped to save space. Condensation does not accumulate on the walls of the balcony, the material protects well from heat loss.
Roman, St. Petersburg.
“I used Bronya Sten brand liquid insulation to insulate an extension in a private house, I am completely satisfied with the result. The material withstood the winter without condensation and frost, the room retains heat better. The paint is expensive, but it is used economically, on average, 1 m2 will cost 500 rubles, but there is no need for additional protection.”
George, Moscow.
“I advise you to buy Bronya paint for insulating window slopes from the outside, any brand will do. It well withstands exposure to ultraviolet radiation, additionally isolates the opening from heat loss, moisture penetration and partially from extraneous sounds. Personally, I applied it to the plaster, but it will do plastic slope, the adhesion of this type of insulation is very high.
Alexey, Moscow region.
“I worked with Bronya Antikor thermal insulation last summer, used it to protect ventilation ducts and a heating pipeline between two houses with a common boiler. I did not notice any flaws in the paint, in my opinion, the coating copes with the task better roll insulation and it looks neat."
Eugene, Volgograd.
Price
| Name of modification of liquid thermal insulation | Main purpose | Volume, l | Price, rubles |
| Classic | Thermal insulation of surfaces that are not demanding on vapor permeability | 5 | 1960 |
| 10 | 3870 | ||
| 20 | 7540 | ||
| Standard | The same, but subject to the limitation of the upper temperature limit of operation to 140 ° C | 5 | 1780 |
| 10 | 3510 | ||
| 20 | 6820 | ||
| station wagon | 5 | 1450 | |
| 10 | 2900 | ||
| 20 | 5800 | ||
| Facade | Heat-insulating coating with increased vapor permeability for indoor and outdoor use | 5 | 2100 |
| 10 | 4160 | ||
| 20 | 8120 | ||
| Wall | Paint that forms an ultra-thin breathable film (up to 1 mm) that protects structures from freezing, condensation and heat loss | 5 | 1590 |
| 10 | 3190 | ||
| 20 | 6380 | ||
| Light | Putty composition Bronya with highly porous nanogel with enhanced heat and sound insulation properties | 5 | 1200 |
| 10 | 2400 | ||
| 20 | 4800 | ||
| Anticorrosive | Paint for protection and insulation of metal structures | 5 | 2290 |
| 10 | 4530 | ||
| 20 | 6660 | ||
| Metal | The same, but at operating temperatures ranging from -60°C to +90 | 5 | 1740 |
| 10 | 3480 | ||
| 20 | 6960 | ||
| Winter | Line for work at sub-zero temperatures | 10 | 4280 |
| 20 | 8560 | ||
| North | Budget modification of thermal insulation Bronya Zima | 10 | 3700 |
| 20 | 7400 | ||
| fire protection | In addition to the warming effect, it is used to create a non-combustible coating. | 7 kg | 2260 |
| 14kg | 5280 | ||
| 25 kg | 9420 |
Anecdote was completely out of place. Although, jokes can be applied as you want and to whatever you want. In general, it was during some kind of war there.
Our country supplied one of the warring countries with surface-to-air missiles. After the first use, an urgent message was received from buyers: "Thank you for the surface-to-air missiles. They hit the air perfectly. now please send the surface-to-air missiles." This is what I mean, no matter what they say, paint, this is paint, it is not mineral wool and not some kind of Ursa. Because of the effect that we get from heaters, it is naive to expect from paint. Still, not those characteristics. But the use of such paint in one’s own (in this case, mine , the household showed that she completed her task and continues to perform.So, I'm starting over..
It looks like a putty, well, or a paste. at first it is a paste, or cream, applied quite easily on any surface. After hardening, or drying (an amateur, how to call it) hardens. It is better to apply with a spatula or a flat scoop, a brush, it practically does not work. The minimum layer of application is six millimeters, if you can apply more, then the heat will be better preserved. The surface on which you will apply this heat-insulating paint should traditionally be prepared, that is, cleaned and degreased, then this paint will hold better and longer. As for the composition, there is a lot of everything. 
The means of protection against the penetration of cold are microgranules, between which there is air, hence the heat-saving effect is achieved. And of course, this paint contains a fixative so that this, so to speak, construction does not crumble. If you believe the characteristics of the paint, described in detail in the instructions for use, then it can withstand temperatures from minus sixty to plus two hundred and sixty degrees Celsius. It can be used for both outdoor and indoor work.
1) The application thickness is not more than six millimeters, it does not take up much space.
2) Easy to apply to any surface.
3) Adheres superbly and lasts a long time.
4) Serves long enough - up to fifteen years, sometimes longer.
5) For its application, it is necessary to have a minimum number of tools.
6) Fairly low consumption. (If you still use a brush or a spray gun, the consumption decreases even more).
7) Possibility of drawing at any temperature, in the range specified above.
8) Easily soluble in water (if thick, distilled water must be applied).
I know four types of such paint-armor: the classic one, that is, without any tricks there, costs about four hundred rubles per liter, the Anticorrosive word speaks for itself. The advantage is that in some cases, it can also process an uncleaned surface. Its price is about ten rubles higher than that of the classics. Paint-armor, such as Winter. This word also speaks for itself. Effectively used in the cold season. It costs more than classic. forty rubles per liter. And finally, the last type of paint-armor, Facade. It is most effective just for outdoor work and insulation of buildings. Its price is one-on-one with classic paint. Such are the things. In fairness, I can say that I used only the last type of paint in my household. It was about four years ago, I covered a makeshift hut in the country with this paint. There are no complaints.
I found three of them. The first is, of course, the price, which is somewhat high. The second is the relatively long drying time. And the third is that, no matter what is said there, it is undesirable to work at sub-zero temperatures.
Video review
| All(5) |
|---|
Technologies for energy saving and thermal insulation of residential and industrial buildings are developing rapidly, new materials are constantly appearing, which are very different in their mechanism of action from heat insulators that were used before.
One of these materials is liquid thermal insulation armor, or, as it is also called, thermal paint. In this article, we will consider the most popular brands of liquid thermal insulation: Bronya, Izollat, Astratek, their characteristics and scope.
Liquid thermal insulation - what is it?
Thermal paint is newest material, with the help of which a very thin heat-insulating layer is created on the insulated surface. Liquid thermal insulation has truly unique qualities, thanks to which it is possible to achieve a tangible effect in saving heat with a 1 mm thick insulator layer. Like many of latest developments, thermal paint is a product of the space industry. Having proven itself well in this industry, liquid thermal insulation began to be actively used in construction.
Application of liquid thermal insulation is carried out with a brush, roller, or by airless spraying. After the material is completely polymerized, a thermal insulation layer is formed on the insulated surface, which has excellent energy-saving characteristics. The coating works as a "thermal mirror", thus ensuring the preservation of heat inside the room.
Thermal paint consists of the following components:
Filler. It is a mixture of ceramic, glass and polymer balls, invisible to the naked eye. The balloons are filled with air inside.
Binder. Made from latex or acrylic.
Additives. The composition of the additives depends on where exactly the heat paint is supposed to be used.
Its properties, as well as the requirements for the insulated surface and, accordingly, the method of applying the material, directly depend on the composition of the thermal paint. Therefore, in order to get the desired result, before buying thermal paint, you need to pay attention to its composition and scope.
How does liquid insulation work?
Heat, as everyone knows from the school physics course, is transferred in three ways:
- Thermal conductivity. Thermal energy transferred from a warm object to a cold one. Thermal paint contains only 20 percent of the components that can conduct heat.
- Convection. Heat is transferred by the substance itself. Due to the fact that most of the mass of liquid thermal insulation is made up of balls, convection losses are negligible.
- Radiation. Heat is transferred due to the internal energy of the heated substance. Thanks to the same hollow balls, thermal paint reflects and dissipates heat. Almost 90% of the heat energy is reflected and remains in the room. The principle is somewhat similar to how a thermos works.
Liquid thermal insulation for facades
Facade thermal paint can be used for insulation of both domestic and industrial facilities. The most popular brands of facade liquid thermal insulation: Astratek, Isollat, Bronya Classic, Bronya Facade, are also used for the insulation of wooden buildings.
Isollat brand insulation contains special substances that provide surfaces with a self-cleaning effect - rain washes away all dirt and dust from the surface.
Purpose of facade thermal insulation:
Reducing heat loss through the facade to a minimum, saving on air conditioning during the warm season.
Insulation of internal walls.
Warming of balconies, loggias.
Insulation of floors and basements.
Applying thermal paint on the internal and external walls of the building helps not only to save heat and save on heating, but also prevents the appearance of fungus, mold, condensation and icing of the walls.
For buildings that need additional fire protection, there are special modifications of thermal paint with a flammability class of "NG": "Fire protection armor" "Akterm Fireproof", "Korund Vulkan", "Akterm NG".
Before applying liquid thermal insulation, the surface must be properly prepared, otherwise the consumption of liquid thermal insulation will increase and adhesion problems may occur. Surface treatment instructions are included with the material, but in the vast majority of cases a deep penetration acrylate primer is used.
If you believe the numerous customer reviews, then it is not advisable to cover the entire facade with thermal paint. But the processing of individual sections with a heat insulator - for example, slopes and other hard-to-reach places, gives an excellent result.
Liquid insulation for winter work
It differs from other analogues in that it can be applied to the surface at low temperatures. This includes brands such as Akterm Nord, Korund Zima, Bronya Zima.
Thermal paint "Akterm Nord" retains its properties at a temperature of -300C. As a solvent for this heat-insulating material, a mixture consisting of white spirit and solvent is used. Before applying Akterm Nord paint, the surface must be thoroughly cleaned and dried. When working with this material, there are restrictions on the humidity of surfaces: for plaster and brick no more than 5%, for concrete 4%. Humidity environment should not exceed 75-80%.
This thermal paint is a water-inactive system. It contains a mass of microgranules with closed pores. The microgranules are in a solution of silicone-modified resin. Various plasticizers, fungicides and biocides are used as additional components.
Application of liquid thermal insulation materials to hot pipes
For insulation of various kinds of pipelines, chimneys, ventilation and air ducts, the following brands of heat paint are used: Korund Classic, Akterm Standard, Keramoizol.
In order to achieve maximum results, the so-called “sandwich technology” is used for pipe insulation, according to which layers of liquid insulation alternate with layers of fiberglass having a thickness of 0.5 mm. In total, 4-5 layers are applied. To make the surface smooth, a special varnish is applied to the last layer.
If necessary, isolate polymer pipe, first carry out a clutch test. If the surface of the pipe is dry and clean, then no problems should arise.
Liquid thermal insulation "Bronya" - scope and technical characteristics
The very name of this heat-insulating material suggests that it is a reliable protection. The material was developed at the Volgograd Innovation Resource Center. American developments were taken as the basis, on the basis of which it was possible to obtain an improved thermal insulation material at an affordable price for the average consumer.
Why is liquid thermal insulation armor so popular, reviews of which among buyers are currently only positive?
The manufacturer presents a wide range of its products "Bronya Classic", "Bronya Anticorrosive", "Bronya Winter", "Bronya Facade", "Bronya Light". Each type of paint has clearly defined and tested technical characteristics. Therefore, there will be no problems with the choice of an insulator and the method of its application.
All products of the Bronya brand are environmentally friendly and safe for health. Thermal insulation armor does not burn, it is easy to apply on all types of surfaces, the service life of thermal insulation is several decades.
And if you decide to opt for this brand, then you can buy liquid thermal insulation armor much cheaper than analogues, since this insulation is produced in Russia.
thermal paint "Astratek" - main characteristics
"Astratek" is the latest water-based thermal insulation material, which incorporates microscopic ceramic spheres. Acrylic polymers are used as a binder.
This thermal paint is used in the energy sector, in construction for the insulation of walls, facades, floors, roofs, slopes, water pipes with hot and cold water, ventilation and air conditioning systems. "Astratek" creates an ultra-thin heat-insulating layer on the surface, which prevents the formation of condensate, protects the surface from corrosion, mold and fungi. The paint can be applied to concrete, polymer, brick and metal surfaces. "Astratek" withstands temperature fluctuations from -600C to +2500C.
The paint is non-toxic, environmentally friendly, absolutely does not support combustion. At temperatures above 8000C, the insulator begins to decompose into carbon monoxide and nitrogen, which significantly slow down combustion.
liquid thermal insulation "Isollat". Insulation with liquid thermal insulation of metal structures
This brand is recommended for applying to the surface of prefabricated metal structures: garages, hangars, warehouses, etc. The maximum effect is achieved with two-sided surface treatment - outside and inside. Thus, the paint protects the room from the inside from heat loss, and from the outside from excessive heating in the warm season.
If it is necessary to apply "Isollat" on galvanized metal, the surface must first be degreased, as problems with adhesion may occur. For complete confidence, an inexpensive primer, for example, GF-1, can be applied to a galvanized surface.
"Isollat" does not adhere well to stainless steel and aluminum due to the oxide film formed on the surface of these metals. Therefore, before applying thermal paint to these materials, it is necessary to pre-treat them with a primer.
What thermal paint to choose?
We hope that the above material to some extent will help determine the choice of a liquid heat insulator. And in order to simplify the issue of choosing a paint as much as possible, below we will give approximate prices for heaters intended for walls and other structural elements of a residential building.
"Korund classic" the cost of 10 liters is 3700-4960 rubles.
Astartek Universal "cost of 1 liter - 415-450 rubles.
"Armor Classic" the cost of 1 liter is 380-415 rubles.
At the word "insulation" many people probably imagine mineral wool or foam. Indeed, for many years these materials were, in fact, the only way to insulate any structures using - from ceilings to floors.
However, there are now many alternative solutions which are better suited under certain conditions. Such methods include liquid ceramic heat-insulating material, produced under the name Bronya.
1 General product information
The thermal insulation material of this brand is a development of Russian researchers. In general, thermal paint (as this category of heaters is generally called) has been used for a long time, and first of all, the purpose of the development was to use it in the space industry. However, efficiency and ease of use have made materials of this type relevant in everyday life.
The material itself, in terms of consistency, appearance and the method of application is similar to conventional paint. The composition, of course, is different - it consists of the following components:
- about 4/5 of the composition - ceramic microspheres like those (invisible to the naked eye), which contain rarefied air;
- about 1/5 of the composition is an acrylic-based plastic binder.
Ultra-thin thermal insulation Bronya also contains additional components, the purpose of which is to prevent metal corrosion and the appearance of fungus on concrete structures.
It is possible to use materials of this type, in fact, for any surfaces and for any structures that need protection. It can be used for:
- metal;
- concrete;
- polymer compositions (made of them);
- bricks;
- tree.
Moreover, the level of adhesion when used for all the listed items is the same.
In view of this, this type of liquid insulation is actively used for processing the following structures and surfaces:
- all surfaces (facade, walls, ceiling, floor) of any premises (from residential to industrial);
- external surfaces of walls of any buildings;
- pipelines for various purposes (with a suitable temperature regime);
- internal and external surfaces of industrial production equipment (furnaces, boilers, and so on);
- surfaces of ships for various purposes (including parts in contact with water).
1.1 About properties and characteristics
The material has a number positive qualities and in addition to ease of use. Among them are the following nuances:
- Moisture resistance - the material easily withstands constant direct contact with water without letting it through.
- Resistance to aqueous salt solutions as in .
- UV resistance (due to which the material can be used without any problems outdoors, in open sunlight - without additional protection).
- Resistance to alkaline compounds.
- High temperature resistance (read more about temperature regime- below).
- Safety for humans, animals, plants.
- The absence of harmful compounds in the composition, both in the normal state and at elevated temperatures.
Here are some key product features:
- time for complete drying of the layer: about 24 hours;
- thermal conductivity (given at a temperature of +20 degrees): 0.01 W / mK;
- pH: 8.5 to 9.5.
Relatively speaking, the use of insulation with such insulation with a layer of 1 mm gives approximately the same result as 5 cm of mineral wool insulation or brickwork 1 brick thick.
1.2 About properties and characteristics (video)
1.3 About advantages and disadvantages
Let's make a list of the advantages that this heater has:
- ease of application;
- the possibility of simple processing of complex elements (corners, drops, recesses, irregularly shaped surfaces);
- no need for perfect surface leveling as in use;
- no need to create a multilayer "pie";
- no load on the insulated structure;
- no need for additional processing;
- high application speed;
- creation of an integral seamless layer of insulation;
- the possibility of quick "repair" of thermal insulation;
- preventing contact of the structure itself with moisture and direct sunlight;
- prevention of moisture condensation on the surface of the structure.
If you had a chance to solve the issue of insulation earlier, you probably know how difficult and time-consuming the process is if you use ordinary material (foam or mineral wool, for example). This requires the creation of a multi-layer structure (primer, vapor barrier, crate, insulation, waterproofing, plaster, fine finish) - which will take a considerable amount of time.
In addition, such a "pie" creates an additional load on the insulated part - which is also not very good. Moreover, the creation of such a design is normally possible only for a perfectly flat surface. Any protrusion or drop, any angle - will create a significant problem (not to mention the surfaces of irregular - convex, for example - shape). The heat-insulating structure created in this way will take up considerable space - which is critical when insulating buildings from the inside, while Bronya paint - takes a few millimeters.
Of the significant shortcomings, only limited effectiveness can be noted. Of course, the thermal conductivity of the material is amazingly low (which is very, very good), but if you use, say, 10 mm of Armor, this will not give a significantly greater effect. The optimal layer thickness is 1-5 mm, and its further increase is irrelevant.
Another disadvantage is the significantly high cost of production - few can afford to use such material to insulate all necessary surfaces. However, with a small thickness, the consumption will also be insignificant (however, in this case, the efficiency will decrease).
1.4 Product types
Under the Bronya brand, several types of ceramic paint are produced. Each of the options is intended for use in certain conditions and for certain surfaces. Consider what exactly this material can be:
- Ultra-thin thermal insulation Bronya Classic and Classic NG - the usual design, designed to insulate any surfaces with temperatures up to +200 degrees (similar to);
- Standard and Standard NG - a cheaper analogue of the above type. It features a reduced temperature maximum - this paint can be used for surfaces whose temperature does not exceed +140 degrees.
- Anticorrosive - a material that can be used directly on rust.
- Facade and Facade NG - paint with increased permeability.
- Winter - paint that can be applied at temperatures up to -35 degrees (whereas other materials - the same Facade) - at +5 and above.
- Light - paint that can be used as a finishing layer. Temperature maximum - up to +150 degrees.
- Fire protection - paint, the purpose of which is to increase the fire protection class of the structure being treated.
- Anti-condensation - with a high chance prevents the appearance of condensate on the surface of the structure.
- Volcano - paint with a maximum temperature of up to +540 degrees.