How to make a lampshade (plafond) at home. DIY chandelier: manufacturing principles with a photo Original metal lamps

27.06.2020

A chandelier is an important element of the interior. Handmade lamps look especially original and beautiful. There are many ideas for creating unusual chandeliers that outwardly are in no way inferior to expensive designer products.

However, in order to create a quality beautiful thing, you need to decide on materials, style, choose the most appropriate technique for creating a lamp. In order for the work to meet your expectations, follow the instructions without missing a single item.

If desired, the master can make a design with a remote control.

The frame is the basis of the lighting device, on which the ceiling or decorative elements are located. It must be durable. You can make it yourself or use a frame from an old chandelier. As a homemade base, use a thick metal wire, wooden slats, hoop, basket, plastic bottle, etc.

The choice of material for the base depends on the weight of the ceiling, the materials used. If you are creating a chandelier out of paper or light fabric, then plastic or wooden frame, for models with heavy shades (metal, glass), it is better to use metal bases.

We reanimate the frame from the old chandelier

If you have an old chandelier with a metal base in your pantry, feel free to use it to fulfill your fantasies. If the material is a little rusty or the paint has peeled off - it does not matter. Alkyd enamel, acrylic paint or spray enamel will help to solve this problem. Just repaint the base any color you like to give an old chandelier a new lease of life.

Alkyd enamel keeps on metal for a long time, but it has a pungent odor. In addition, several layers will need to be applied to the base so that there are no bald spots. Acrylic is great to lay down, but to keep it, after drying, you need to apply a layer of varnish. It is very easy and quick to paint enamel from a spray can, but it is better to do it on the street or cover all surrounding surfaces with paper in advance. The choice is yours.

After drying, decorate the base decorative elements or put on a homemade cover.

How to make a new one with your own hands: options and step-by-step instructions for making

Wooden chandeliers look original and natural. The finished frame can be decorated or left in its original form.

Step by step instructions for creating a wooden frame:

Take 12 rails (length - from 30 to 45 cm), sand them with sandpaper.
Make holes for the wire.
Make holes in which you want to fix the shades.
Treat the workpiece with paint with a touch of natural wood.
Connect the planks with self-tapping screws into a suitable design, for example, a hexagon.

To create a wire frame, a strong carbon wire (diameter 1.5 mm) is used. If not, then use a material made of aluminum, cast iron or copper.

First, a thick wire base is created, it can be round, geometric or fantasy designs. It is desirable to supplement the base with stiffeners. You should also make a mount under the cartridge.

The frame can be made from a plastic eggplant with a volume of 5 liters. To do this, cut off the bottom of the container, and then decorate with decorative elements.

What are the techniques for making ceiling lights

Ceiling lamps can be created using the technique of origami, carving, embossing, decoupage. Lamps made using the knitting or weaving technique also look very beautiful.

Original origami chandeliers will be a great addition to a modern interior.

Important! When creating an origami ceiling do not use very thick paper, as it will not transmit light well.

If you are into crochet, then use a few doilies as the base for the lampshade. This chandelier looks amazing and can be hung in the bedroom to create an intimate atmosphere.

Homemade chandeliers with a pendant lampshade consist of a frame and decor (paper butterflies, beads, wax paper, artificial flowers, etc.). These elements are attached to the fishing line with glue, and then fixed on the base.

Very popular among home craftsmen are chandeliers, which are created from a certain material (threads, glue, special paste, ropes, etc.) and a balloon.

Ceiling lamps made of fabric can be painted acrylic paints, apply the decoupage technique or place any decorative elements on the material.

What can you make a chandelier at home

A do-it-yourself chandelier is created from different materials:

paper;
threads;
CDs;
bottles (plastic, glass);
cardboard;
napkins;
tree, etc.

The chosen material must have the characteristics you need: safety, aesthetics, practicality, ease of maintenance, strength, durability, etc. In addition, the chandelier must match the interior of the room. Also consider the size of the room and the height of the ceiling. If the ceiling is low, then mount the lamp on the bar, but if its height is from 3 m, then a suspended structure that needs to be hooked is suitable.

For a homemade lamp, an energy-saving light bulb is more suitable, since it does not heat the body as much as a regular one. An added bonus is energy savings.

Advantages and disadvantages of materials for decorating a do-it-yourself chandelier ceiling

When choosing a material for a chandelier body, focus on aesthetic properties and technical specifications. It is recommended to use materials that do not contain toxic substances, as they spread when heated.

Give preference to materials for the ceiling, which are easy to care for. For example, fabric lamps collect dust faster, and plastic is easier to wipe with a rag. And the paper case can be quickly replaced.

The choice of material also depends on the degree of illumination of the room. Transparent glass transmits light best. And for a bedroom or a children's room, it is better to make a chandelier with subdued light.

Lighting is the most important component of the interior. The coziness and comfort level of our home depends on the lighting. The play of light and shadow allows you to beat the winning moments of the interior and divert attention from bad moments. And also - lamps, floor lamps, chandeliers and lamps create the atmosphere that we call "home". Unique lamps and The best way- make a lampshade with your own hands. Homemade plafonds and lampshades are the thing that will make your home stand out from the rest.

A few words about security

In the manufacture of lamps, floor lamps and chandeliers in industrial conditions, the minimum distance from the "body" of the lamp to the materials is preliminarily calculated. This distance depends on the power and thermal radiation of the lamp and on the type (combustibility) of the material from which the ceiling / lampshade is made. At home, hardly anyone will bother with such calculations. And in order not to create a dangerous situation, it is worth adhering to certain rules.

And in general, having made a lampshade and installing it, in the first few days, pay attention to whether the ceiling heats up. Heating is any increase in temperature above environment. If the lampshade feels “warm”, change the light bulb to a less powerful one. Check again. So until the homemade lampshade warms up.

Where to get a frame

If you want to remake an old lamp, floor lamp, sconces in which the old lampshade has become unusable, you can simply use the existing base by peeling off the old material. Before starting work, inspect the frame well, if there is rust or a damaged coating somewhere, maybe it’s worth stripping everything off and painting it again? At the same time, the color can be changed. If there are no old frames, you can buy an inexpensive lamp (in a store or at a flea market) and do the same operations with it. Good lampshades can, by the way, be made from waste baskets. They are wire, there are plastic. The main thing is to find a suitable shape and size. Then make a hole in the bottom for the cartridge. Further - it's up to decoration / plating, and here there are a lot of options.

If this method is also not available, you can make a lampshade without a frame (there are some) or make a frame yourself. The material for making a frame for a lampshade with your own hands is: wire, wood (wooden or bamboo sticks, specially cut elements), plastic bottles.

How to make a frame for a homemade wire lampshade

The wire for the lamp frame needs aluminum or steel. Aluminum is easy to work with, but wrinkle easily. This is not very important when the lampshade is already in use, but this fact must be taken into account during operation: you can ruin the shape. On the other hand, such plasticity allows easy and simple changes in the shape during operation. So that's a good option. Aluminum wire can be "mined" from electrical cables. You will have to remove the protective shell and you can use it.

Steel wire is more elastic, so it retains its shape well. It can be found in the construction market. It's harder to work with her. It is desirable that there were strong male hands nearby.

In addition to the wire, you will need powerful wire cutters and pliers to work. The frame of the lampshade usually consists of two rings and racks connecting them. The shape of the future lampshade depends on the size of the rings and the shape of the racks. Questions may arise regarding the number of racks and how they are attached. The number of posts depends on the size of the rings and how "round" you want the lampshade to be. The more posts, the more “smoothly” the fabric will lie. So it's up to you to choose, but the optimal distance between the racks in the lower circle is about 5-6 cm.

Techniques for creating a frame for a wire lampshade

Methods for attaching the stack to the lampshade rings depend on the thickness and type of wire, as well as the tools you have. The easiest is to make a small hook at the end, then clamp it tightly. And so that the ring does not slide left and right, pre-treat the wire at the attachment point with sandpaper with a large grain. This is an option for thick aluminum wire. If the wire is steel, and with a diameter of 1.2-2 mm or more, the best way is. Thinner wire can be bent and wrapped around the ring or also made a hook.

If you make hooks, wind the wire, appearance it turns out far from being as perfect as that of factory frames. But this imperfection will be covered by the lampshade itself. If she still worries you, find a ribbon of a suitable color (usually matched to the color of the lampshade) and carefully wrap the resulting frame. It will get much better. The tape can be smeared with PVA glue and, wet, tightly, turn by turn, wrap the frame around.

wire mesh

If you can find a fine wire mesh, you can quickly make an almost perfect cylindrical ceiling for a floor lamp, table lamp, night lamp, lampshade for installing candles, etc. All you need is to cut off a piece of mesh of the desired length and width, roll it into a ring and fasten the wires by wrapping them around the racks.

To prevent the mesh from straightening when cutting off a piece, cut so that long free ends remain on both sides. They will fasten the ceiling cylindrical shape. And the imperfection of the upper and lower rings can be masked with a tape of the desired color.

From a five-liter plastic bottle

An interesting shape lampshade can be obtained from a large plastic bottle. There are bottles of 5-6 liters and even 10. Here they can be used. From the container we cut off the top or the bottom - depending on what you like best. In the cut off part we make a ring for the cartridge. If cut off top part, for some cartridges you can use the neck. For those with a larger diameter, it will have to be cut off.

Then we cut out the excess plastic, form the rims and racks of the ceiling. In order not to be mistaken, you can first draw all the lines with a marker. Cutting will be easier. Everything is elementary. Then we just decorate. And yes, it is necessary to cut the plastic, otherwise warm air there will be nowhere to go.

We make lampshades on the frame

There are enough options on how to make a lampshade cover:

From tapes

The simplest and fast way transform an old lampshade for a floor lamp or table lamp - use ribbons. You need a frame or lampshade in the form of a cylinder. He may be naked or cloth-covered. If you use a "bare" frame, the light will break through the cracks, which will create interesting lighting effects, but the lighting will not be uniform. Reading in this light is inconvenient interior solution. If you need even lighting, cover the frame with fabric first. It can be the same color as the ribbon, a couple of tones darker or lighter, it can be contrasting. Everything depends on your desire. And remember that the darker the fabric, the less light the lampshade lets through.

We take a tape 1-2.5 cm wide. We fix it from the wrong side of the lampshade with PVA glue, additionally fixing it with a pin. If you took a wire frame without fabric, we attach it to the upper or lower rim (you can sew it on with your hands, you can use glue). Then we begin to wrap the entire frame, from top to bottom, placing the turns of the tape close to each other, but without overlap.

Having finished the circle, we unfold the tape 90 °. We fix it in this position (with a needle and thread or PVA glue, glue from a gun, temporarily fixing it with a pin, pressing it with a clothespin). Then we skip the tape under the first tape, pull it out, lay it on top of the second one, then pull it down again, pull it up through one tape. So, gradually, we create an interlacing, filling the entire lampshade.

Alternatively, you can skip two vertical tapes. But then you need to make sure that each next row moves one crossbar. Then you get a different type of weave. Such a lampshade is ideal for floor lamps, since it will direct the light downwards, scattering through the walls will be small.

In this version, the ribbons can be the same, they can be of the same color, but of a different texture, they can differ by a couple of tones or be contrasting. In a circle, the tapes can be started all the way, or you can - after a certain distance. If you find a wide tape and apply it with an overlap, then horizontal ones will not be needed at all. And if you use a braided or twisted cord (in the lower photo on the right), we get a completely different lampshade in appearance. So only this technique of finishing the lampshade gives a lot of options.

Let's briefly present the ideas. There are many options for how you can design standard frames for lampshades in a non-standard way. The first method has already been voiced: you can knit a lampshade cover on knitting needles or crochet. Several options in the photo.

Not everyone knows how to knit. It is easier to work with beads, especially if you glue them. You can decorate an old fabric with beads, sequins, beads of various shapes and sizes. You can make such a “new-old” lampshade with your own hands in a couple of hours. You select the decorations that match the color, coat the fabric with PVA glue, stick the decorations. To complete the look, you can assemble pendants from beads and beads that are attached to the lower rim, but this is already painstaking work. Although the effect is interesting.

You can sew a new lampshade out of fabric. But it is not necessary to make it an updated copy of the old one. Fantasy must be turned on! If a lamp or floor lamp is in the girls' room, new case on the lampshade can be made in the form of a skirt. The style of the skirt is up to you. Interesting look in the fold. With and without ruffles.

In the boy's room, you can use an old geographical map. They are on thick paper. If the paper is not thick enough, first you need to stick the card on cardboard, and then glue the lampshade from such a blank.

Original shades are obtained if the finished frame is braided with threads or ropes. Ropes can be natural. In this case, they are gray, brown beige. You can find thin synthetic colored cords. Of these, more "fun" in color products will turn out. The situation is even simpler with knitting threads. They are thin, thick, textured, with a smoothly changing color. In general, there are a lot of options.

We take the frame and braid it according to a certain pattern. You can start with racks. Braid each rack with a pigtail (the length of the threads should be 3 times the height of the rack). When this work is finished, we begin to stretch the threads / ropes between the racks. They will need to be passed through pigtails, so it is more convenient to do this with threads with a needle, and the ropes can be pushed through like that.

The second option is to first entangle the entire frame horizontally, and then braid the racks. A pigtail will no longer work here, you just need to fix the turns on the rack with oblique stitches with a certain slope. This version is somewhat simpler in execution, but the “pigtails” look more decorative.

Homemade ceiling lamps without a frame

Many materials are rigid enough to hold their shape on their own, yet malleable enough to be made into something interesting. There are a lot of such homemade lampshades. And almost all of them are worth your attention. We give here only a part, the other part will go in the photo section (see below).

From knitted lace doilies

Many people have crocheted napkins and they lie in the “stash”, because it’s a pity to throw it away and they don’t know how to use it. There are very interesting idea- make them a lampshade for a chandelier on a suspension. In addition to napkins, you will need a large balloon or inflatable ball, glue for heavy wallpaper (vinyl, silkscreen, etc.), brush.

We soak the glue according to the instructions, wait until it swells. Inflate a balloon or take a ball, hang it up. When the glue is ready, lay out a napkin on some clean surface, coat it with glue, put it on a ball.

It is necessary to lay out with such a condition that in the center there will be a hole for the cartridge. Glue the napkins one by one. They need to be laid out so that the edges overlap slightly. When all the napkins are laid, once again coat them with glue and leave to dry. When the glue is dry, blow off the ball or ball (the ball can be pierced if you don't mind) and take it out through the hole. That's all, the lace lampshade is ready.

In some cases, there are problems with how to hang the finished lampshade on the cartridge. The problem is solved simply - take a transparent plastic bottle, cut off its neck, if necessary, expand the hole to the desired size (so that it fits tightly on the cartridge), then cut off the plastic so that you get a ring 5-7 cm wide. Lubricate this ring with PVA glue , and glue it to the lampshade from the inside of the ball.

Round plafonds made of threads

Almost the same technology can be used to make round and semicircular stylish shades. Choose the thread of the right color. Their composition is absolutely unimportant - the color, thickness and texture are important. They can be shaggy, smooth, twisted, thinner and thicker. It depends on the appearance. It is most convenient to work with cotton threads of medium thickness. They absorb glue well and then, after drying, keep their shape perfectly.

You will also need a ball or ball. This will be the base of the lampshade, which sets the shape. Choose the size of the base as you wish. The threads will need to be glued, for this you need PVA glue. It is poured into a container, diluted with water in a ratio of 1: 1.

You can use other glue. It is important that it becomes transparent after drying. These are WB-29 from TYTAN Professional and D2 joinery adhesive. If you use any of these types of glue, read the instructions.

On the ball or ball, draw a circle, which will be slightly smaller in size than the lamp socket. On the opposite side, draw a larger circle - this will be the lower edge of the ceiling. Now everything is ready, we can start.

We coat the threads with glue and wind them around the ball in a chaotic manner. It is more convenient to do this if the glue is poured into a container - you can lower the entire skein there, and just pull the thread slowly. With glue in a tube, everything is not so comfortable: you have to coat sections up to a meter long, rewind, coat again. Time goes much longer. This is if you do not use PVA. But on the other hand, the products turn out to be more rigid and do not sag, do not change shape over time, as can happen with filament lampshades on PVA.

When winding threads around the ball, we carefully go around the drawn circles. If you accidentally climbed into the "forbidden territory", we simply move the threads, forming an even (more or less even) edge. When the threads run out or you decide that there is enough density, the process can be stopped. We fill the edge of the thread between others. All. Then we coat the ball with wound threads again with glue (PVA can be watered) and leave to dry (at least 2 days). To prevent the ball from rolling, we find a bowl or pan and use it as a stand.

The last stage is to blow off the ball or ball. If the ball has a nipple, press it with a thin wire, releasing air. Take out the dropped ball. That's all, you can thread the lamp inside and test the lampshade.

The technology is the same, but the appearance is very different…

According to the technology described above, it is possible to make not only round shades. Rectangular, triangular, trapezoidal. Choose a base that is easy to remove, wrap threads soaked in glue, braid, even sticks, newspaper tubes, etc. After drying, remove the base and, behold, you have made a lampshade with your own hands. A couple of examples in the photo below.

You can also use chopsticks... Just wrap the ball with cling film too and use not PVA glue, but transparent carpentry

It's pasty polymer clay in a tube, which was applied to a milk bag, then dried and the bag was removed ...

Creative homemade shades for lamps, floor lamps and chandeliers

You just wonder what people don’t make beautiful and unusual things from. Plafond from a cup, grater, bottle, beer or glass jar, metal parts and rings from beer cans ... It seems that everything can be used ...

Lampshade from an old sieve ... stylish

Candlesticks turn into lamps ... without lampshades

You can’t tell in life, but these shades are made of hooks used to open metal cans for drinks and canned food… if they are painted, it will be even more interesting

Don't know what to do with grandma's crystal? Make plafonds out of it ...

Manufacturing instructions:

1. First of all, cut an opening in the front panel of the lamp. To do this, you need to mark future cutouts. Using a drill and a drill, holes are drilled in the corners so that the edge of the hole only reaches the marked line, but does not go beyond it.

Cut out openings

3. It is necessary to make holes for the acrylic wall holders. To do this, the front part is laid on the back and aligned as if these two parts were already installed. The contours of the cutouts are transferred to the back wall.

On the back side of the front panel of the luminaire and on the front side of the back panel, lines are drawn 8 mm lower than the cutouts. Five holes are drilled along each of the lines - their depth should be 210 mm. Then, acrylic wall holders will be installed in them. The diameter is selected according to the diameter of the holder.

Making holes for holders

4. Now it remains to drill holes for the dowels. The side parts are installed on the front panel as they will be fixed. To mark the hole, it is better to use templates - without them it is easy to make a mistake. Using an 8 mm drill, three holes are made in the end parts of the side parts.

Making holes in the sides

5. The front panel is glued to the sidewalls. To do this, glue is applied to the holes for the dowels. Glue must also be applied to the surface of the parts. Then the dowels are inserted. Further, the structure is fastened, the joints are tightened with clamps.

Glue the sides to the front

6. Now you need to connect the front panel with the installed sidewalls to the back. First to back wall narrow sidewalls are screwed on. With the help of dowels, the back part of the structure is fixed to the wall. It remains only to mount the front of the structure to the rear. The front part is leveled and attached with self-tapping screws.

Joining the front and back

7. Cosmetics are being carried out - everything is polished, then the holes for the screws and joints are puttied.

Sanding and polishing the surface

We paint in the desired color

Transform your interior with custom lighting fixtures own project, an exciting and at the same time useful task. A small luminous detail of the living space invariably attracts attention and the whole life of the house is concentrated around it in the evening and at night.

How to get started

They draw up a phased plan, a sketch of the future device, purchase materials for the installation of electricians and decor, prepare tools and workplace. Carefully work out all the points related to safety during the operation and operation of the lamp in everyday life.

Unnecessary and already used things in the household can become a necessary help for the plan. electrical appliance and with their help you can not only save money, but also give them a second life in designer lamps.

Instructions on how to make a lamp with your own hands

Loft-style lamps (the most simple designs) are gaining more and more popularity and are well suited to many types of interior. Factory-made lighting fixtures in this style cost a lot. But a person with assembly skills can easily assemble from scratch, a do-it-yourself 220-volt table lamp that combines metal and wood.

For the stand, a board is selected that is suitable in size, at least 5 cm thick. Processed, trying to preserve the natural texture of the tree - polished, stained.

To attach the legs in the board, make a hole with a drill (diameter 19 mm) half the thickness and screw the adapter into it. Drill a hole perpendicularly and pull electrical wire. On the other hand, connect the switch and plug.

To assemble the lamp, purchase copper pipe(12 mm), fittings, cartridge, lamp, spray paint under copper, super glue. Of the tools used pipe cutter, pliers, screwdrivers.

The pipe is cut into pieces - 50.60, 150, 350 mm. A wire is pulled through the longest section and connected to the adapter on the stand. Passing a cord through each segment, connect the remaining parts with fittings in the form of the letter "G". For a more stable construction, the parts are glued.

The cartridge, pre-painted with paint, is disassembled and the insulation is cleaned. Connect ground and phase. Screw in a regular 220v light bulb. In stores there is a large selection of retro lamps: Edison and LED, suitable in style, but with modern characteristics.

With your own hands, you can assemble a table lamp from LEDs. Their use significantly saves energy, and the appearance and nature of the lighting look modern and stylish on the table.

What is a dimmer for?

In the loft style, free-hanging light bulbs are welcome - both on tables, and on walls, and even in chandeliers. Depending on the situation, it is appropriate to change their brightness using a dimmer, a device that changes electrical power.

The dimmer changes interior lighting in a wide range and functions as a switch. There are many types on the market. But if you wish, every master can try himself in fine painstaking work and make a dimmer for a table lamp and other lighting fixtures with his own hands.

Details (triac, dinistor, diode, non-polar capacitor, fixed and variable resistors, LED for indicator) are purchased at any specialized store. Schemes and installation algorithms are available on the sites.

How to make a bottle base

An interesting option for warping the lamp is a glass bottle. Holes are drilled at the bottom and in the lid with a drill. They are connected to a metal support laid horizontally using nuts and washers. An electric cord is threaded through the holes and brought to the neck of the bottle, connecting to the cartridge.

The made ceiling and cartridge are securely fixed at the top of the bottle neck. Glass can be painted with paints or decorated using jute filigree technique.

There is another option. If the neck of the bottle is wide and a cartridge is placed in it, then the wire is led out through it and the laborious operations of drilling glass are dispensed with.

Frames and their decor

Frames are made from various materials– metal, wood, plastic. To make a metal frame for a lamp with your own hands, they take a hard wire.

With the help of pliers, bending the wire and strengthening it, create the intended shape. Wrap with cloth, paper, jute. If there is a finished metal frame, use it. They change shape with a simple twist.

A metal mesh reinforced around the frame will give additional impetus to the development of creative thought. The mesh is attached to the frame with plastic clothespins and decorated with three-dimensional elements, for example, plastic fasteners-collars.

Jute or decorative rope is passed in longitudinal and transverse strips so that a braid is obtained, or they are wrapped around the ceiling. If necessary, paint with acrylic paints.

An original and effective way to decorate a lampshade is to use beer can keys. You need to accumulate a lot of them. A cut is made in each of the keys, then bent in half to hang it on the top wire ring. Thus, the first row is obtained. For two keys of the upper row, the key of the lower row is hooked, etc.

A simple frame is covered with a beautiful and suitable fabric for the interior, gluing it with silicone glue. Corrugated decorative paper looks good. Plastic bottles and spoons, beads are used. Patchwork and decoupage lovers open horizons practical application these techniques. The photo shows the lamps made by hand.

In addition to standard lighting using a cartridge and a light bulb, a light, sticky adhesive is attached to the inside of any lampshade. led strip with a constant voltage source of 12 V.

What to make a chandelier from and how to hang it

You can use junk and specially purchased materials for the chandelier. It’s easy to make ceiling lamps out of them with your own hands, and if you follow the right connection technique and all successive steps, it’s safe.

The manufacture of frame shades and their decor are discussed above. We add that chandeliers made of wood, plastic and cut look very impressive. glass bottles, CD discs, cans.

The chandelier must be hung on a separate rod. Rigid and flexible suspensions, special cables securely fasten even the lightest chandelier to the ceiling.

The cartridge is disassembled, the cable is pulled, a loop is made under the cover and a lock washer is put on to prevent accidental pulling out of the cartridge. They select and screw with their own hands into the finished lamp socket of a led or Edison lamp. Globe lamps with a frosted bulb and shank are excellent, creating bright, but not eye-catching lighting.

Combining various decor techniques and assembly techniques, understanding electrical engineering, you can create amazing and functional lamps that emphasize the style of the interior.

DIY lamp photo

AT modern design an interior where things and colors are correctly selected, correctly installed lighting prevails most of all. Thanks to lighting devices, it is possible to highlight different areas of the premises, visually expand or reduce the space, while giving coziness and comfort in the living room or bedroom. Of course, you can buy a lamp or create a sconce with your own hands from improvised means. The last option is economical while allowing you to make the design at your discretion.

Fashion does not stand still, but moves in a circle, so now crystal sconces are no longer so popular, and wooden lamps are considered a sign of luxury. Not everyone knows that in the 16th century palaces and churches were equipped with wooden structures. As you understand, there was no electricity at that time, therefore, as lighting element candles were played, which were installed on wooden stands. To date, it is possible to produce sconces at home, both for candles and for electric light bulbs.

As you know, any material has its pros and cons, and wood has its own special qualities that must be taken into account when making a lamp made of wood:

The tree is considered the most eco-friendly material containing resins emit useful aromas, due to which the air in the room is filled with useful microelements, which, in turn, is beneficial for the respiratory tract of the human body.
Easy processing of manufactory - for the production of steel and plastic elements for decorative lighting, special equipment is required, and this is a big expense. To make a sconce with your own hands from wood, you only need the usual tools that almost every home craftsman has.
Wood has a special strength and durability, especially if the material is impregnated with special agents.
From wood, you can create exclusive carved, prefabricated or combined lamps that will not only decorate your interior, but also stand out favorably, emphasizing the refined taste of their owners.

Disadvantages of wooden sconces

Before you start making wood with your own hands, you need to take into account and take all safety measures, as well as develop a future project wall sconce. It must be remembered that light bulbs should not come into contact with wood and other elements of the lamp. Let's take a closer look at several models of wall sconces.

Wooden structures for lighting fixtures

Other options for combining wood and metal have different directions. It could be a metal lampshade with wooden base or a lamp in the form of a torch, and a hand that holds it. For connoisseurs of wood, we can offer the manufacture of sconces only from wood or plywood. It all depends on your imagination and the material at hand.

bamboo lamp

A beautiful lamp can be made from an old lamp and bamboo sticks tied with coconut fiber rope. The device is elementary, three bamboo sticks are connected to each other. Two are vertical, and one between them is horizontal and is attached to the wall. The lampshade from the old lamp is attached with a rope to a horizontal bamboo stick. This design can be placed in the house, on the porch or gazebo.

Lamps for a child's room or bedroom

A beautiful wall night light for a nursery can be made from a sheet of fiberboard or plywood. An example is the design of an ordinary birdhouse.

To do this, the details of the sidewalls, roof, bottom are cut with a manual or electric jigsaw. On the reverse side, self-made fasteners are installed, after which the product is painted and electrical components are installed.

The main features in the design of the lamp

When working with wood, wear gloves and goggles.
How to make and connect a sconce with one light bulb - in this case there should be two wires, the phase passes through the switch, and zero is connected to the blue output wire. The more lamps, the more wires, but the connection principle remains the same.

Location of wall lights:

The height of the sconce from the floor in the bedroom should not exceed 1.6 meters.
In the children's room, you need to hang lamps at an inaccessible distance for children.
In corridors with a high ceiling, installation takes place at a height of two meters from the floor, if the room has a low ceiling, then lighting can be mounted at a distance of 1.8 meters. For the living room 1.4 meters.

In custody

You can make your own unique and unusual lamp from various improvised items that can be found in your garage or shed. As a result of such modifications of old things, you will get a stylish handmade lamp. As a result, you saved on the purchase of sconces and at the same time freed the shelves from old trash.