Gate and fence 

The best with your own hands. We make useful homemade products for summer cottages. Electric homemade for the garage

Nothing brings joy to the house like a thing created by oneself. Indeed, various homemade products for the home not only fill life with bright colors, but also give the interior a uniqueness and some kind of zest. And it is certainly impossible to forget about such a thing (even if it is a small trinket). And it’s not so important that these are homemade wood products for the home, paper or plasticine. There are millions of options and methods for making various gizmos, and today we will consider a few of them. So, how to make interesting homemade crafts for the home?

Shelf of tin cans

It would seem that such a trifle - a jar of coffee. However, even from it you can make a beautiful, convenient and useful shelf for storing household items. Often, various souvenirs and memorable photographs are stored in such containers. There is little practical use for this homemade product, but such jars look very harmonious.

Details on how to make this craft

1. First, holes are punched in jars with a drill or with a special ripper (in the upper and lower - 3 each, and in the walls of all the others - 2 points each).

2. Next, the jars are fastened together. Nuts and screws are used as fasteners small sizes. By the way, to get the desired (beautiful) result, you will need to have at least 5-6 of these jars.

3. After that, a hole for the screws is punched in the containers. In the bottom of the jars located in the upper part of the structure, 1-2 holes are made to attach the shelf to the wall. The finished homemade is screwed with a screwdriver or screwdriver. For this, dowels are driven into the wall first.

Everything, now homemade products for the home are being put into action. Be sure - various trifles in such jars will definitely not get lost. Thus, you kill two birds with one stone - decorate the interior and get rid of the mess in the house.

DIY for home - how to make a clock on a CD / DVD?

The clock on the CD is also very interesting and original version interior decorations.

As you can see, the design of this device is very original, and therefore it will look organically against the background of any interior (perhaps it will become its highlight). Such "smart" homemade products for the home are made in a matter of minutes. We will tell you more about all the stages below.

So, how to make a homemade clock with your own hands? To begin with, you will need to prepare the appropriate materials - a CD / DVD CD (you choose the design of its front part at your discretion) and a cover-case for it (the distance between the walls should be at least 0.05 centimeters). It is very important that the last part does not have any chips or scratches. To facilitate the work, you can purchase a ready-made watch and then simply replace the standard dial.

It must be arrow, otherwise it will not work to make a homemade product. You should also make numbers. them in total there should be twelve. It can be cardboard, paper or plastic circles. Their thickness should not exceed two millimeters. Rhinestones can be used as decorations. You also need to prepare about 30-40 centimeters of wire, a piece of leather or fabric and Moment-type superglue. The basis of this whole structure will be a CD-ROM. We will remake it in the first place.

First you need to mark the disk into twelve equal parts and stick numbers on the marked points. In this case, the sectors should not go beyond the outer diameter of the device. How are homemade products made for the home? After the sectors, we proceed to the clock itself - remove the arrows and place them exactly in the center of our disk. By the way, before fixing them, you can stick some interesting photo on the disk, which will make the design of the watch even more original.

To increase the size of the arrows, use thin metal strips. To achieve the desired result, it is enough to apply glue to them and carefully position the part evenly over the entire surface of the leading elements. The very same mechanism of the arrows is attached to the reverse side of the disk.

What to do next?

So, the base of the clock is almost ready. The next step is to make holes in the device along the contour of the arrow mechanism. The box of this disc is installed in a case. The mechanism itself is brought out through the hole and tightly closed. Now, with the help of a wire, an emphasis is made, which is glued to the back cover. To make it more durable, glue a piece of fabric or leather on top of it. This will make the emphasis not only strong, but also beautiful, since the excess part of the wire no longer gapes on the clock as before. Everything, a homemade watch from a CD is successfully made. It remains only to insert an AA battery and set the time. By the way, you can also make a battery with your own hands.

How to make a source of energy from a lemon?

As we know, this fruit contains a lot of acid, respectively, with right action lemon can be turned into a real mini-battery.

Of course, the charge from such a “battery” is not enough for work. household appliances, however, for the functioning or charging of a mobile phone, this current is quite enough.

We make homemade products for the home - preparing tools to turn a lemon into a source of constant energy

During the work, you will need tools such as a knife, a soldering iron, a drill, an iron pin, as well as a few pieces copper wire in isolation. Among other items, it should be noted the need for one glass or glass, a pair of wooden sticks and the same number of push pins. And, of course, the lemon will be our main source of energy. You can also use an orange, but there is much less acid in it, so the charge from it will be minimal.

Instruction

First, cut the lemon in half. This is necessary so that he gives more acid, which is necessary for the lemon to be fixed in the glass so that it does not roll around the table. Further, copper and iron pins are inserted into its pulp around the entire perimeter at a distance of 0.5-1 centimeter. "Minus" we will have iron, and "plus" - copper.

Pieces of wire are attached to all pins with a soldering iron. They will act as a connector for the power supply. All elements are connected in series.

At the final stage, sticks are inserted into the battery compartment. Polarity is important here. Contacts are pressed against the contact group. The container remains open throughout the entire process of charging the device.

So we figured out how to do useful homemade for the home with their own hands. Good luck in your endeavors!

Do-it-yourself pleasant little things most often become the main factors in creating home comfort. Many of them are quite easy to make - just sleight of hand, a little imagination and creative inspiration.

Interesting things collected in our photo selection are not only pleasing to the eye, but also make life even more pleasant. Rather, let's start reviewing fascinating things with our own hands.

Rug of stones

Let your interior be one step closer to nature. This cute handmade rug made of large pebbles makes a bright natural decor - a great alternative to the traditional rug at the entrance.

Mug with golden accent

Have you been dreaming of transforming your favorite mug for a long time? Stop putting things off until later. Get a special aerosol with golden paint and start creating as soon as possible. There can be many design options - create to your health or follow the original example in the photo.

Lace lampshade

You will hardly find the similarity of this lace lampshade in any store, because such a masterpiece is the result of manual creativity and craftsmanship. The essence of the work is shown in the photo.

Paper cutting: evening city on a shelf

Real magic in your home is not difficult to do at all. This spectacular lantern in the shape of a fairy-tale castle is cut out of paper. Even your child can do this technique.

For crafts, prepare the following materials:

  • thick paper;
  • scissors, pencil, ruler, eraser, breadboard knife, glue stick;
  • New Year's garland (preferably on batteries).
  • a shelf for a picture (necessarily with a side that will hold the picture).





We bend the edge of the layout to install it on the shelf. We lay a garland along the bottom and light the lights. Fairy tale castle with lights is ready!

kitchen organizer

Kitchen accessories, made with love by you, look much more interesting than store-bought counterparts. With them, the surroundings are filled with a special warm atmosphere and comfort. Even such a simple cutlery organizer made of tin cans will give the interior a certain personality and charm.

Cardboard mirror frame

Get creative with your design dressing table. Instead of a boring classic mirror, you can hang something more original above it, for example, a mirror with an openwork cardboard frame. Believe me, such a masterpiece with your own hands looks much more elegant than the store counterpart.

City plot from cable

Add a touch of unpredictability to own interior. A long black cable, randomly lying around a white wall, can turn into an original minimalist urban plot against its background.

Vintage photo frame

An antique picture frame and simple wooden clothespins are great materials for creating a unique vintage-style photo frame with a creative touch.

Charging point in the box

If you are one of those who have accumulated a lot chargers, we have for you the perfect solution for an aesthetic and at the same time functional box for storing them. It not only visually decorates the room and keeps all the devices in order, but also charges them on the spot!

book of kisses

A creative surprise for a loved one - a mini-book with kisses. Flipping through the pages, the hearts are becoming more and more.

Accessory for toast lovers

Here's a cute toast you can sew yourself. Nice gift for the occasion.

Shoes with cats

Add a little more color to your everyday life. Old ballet flats can be transformed in an original way by embellishing the socks with charming cat faces.

And you will need just a little: plain ballet flats, a brush, black and white paint, a white marker, masking tape. Then everything is according to the instructions in the photo.







Soul winter accessory

Homemade decorative skates will once again remind you of a winter fairy tale and relaxation on the ice rink.

If you want to make the same, then prepare large pins, felt, cardboard, woolen thread for laces, hot glue, a marker and a tapestry needle.








A little humor on a rainy day

Comic covers on rubber galoshes will certainly not allow you to be sad in rainy cloudy weather.

Adorable spiny hedgehog

A sewn hedgehog made of yarn can also have needles, but not their own, but sewing ones.


funny abstraction

Feel like an abstract artist by building bright emoticons from different miniature figures.


Cute kittens made of cardboard for holding thread

Collection of handmade stamps


Bunny bag for children

Why buy accessories for a child when you can make them yourself. A bag for a girl with a hare muzzle looks very original.

Ice cream garland

Create a summer mood by tying a garland of the most popular treat of this season - ice cream cone.


Notebook in homemade leather cover

Stylish hanger

Eyelets made of leather ribbons nailed to the wall - an extraordinary minimalist hanger or shelf for books, magazines and other small things.


magic vase

You can create a magical atmosphere in your home with simple beautiful things, such as this vase.

Rhinestone bracelet

Decorative letters for a refrigerator or children's board

Letters from the learning alphabet are a great idea for home decor. All you need is a little bit of golden paint.


Convenient headphone clip

Spectacular shimmer

A little palatial interior will give candles with golden and silver flicker. Such beauty can be made at home using old candles and aluminum tape.


Donut bracelet

Young fans of Homer Simpson will love this cute donut bracelet. Here you only need bright nail polish and a plastic children's bracelet, then all that remains is to dream up with icing.

Boring clothes

A simple beanie will make a big difference in your everyday style. It is enough to sew a few bright flowers along its edge.


T-shirt with a figured neckline

Sweatshirt with watercolor pattern

Pareo beach dress

Headband

Woven scarf

A simple white T-shirt will become more stylish if you sew a neat pocket with an interesting print to it.

More ideas for DIY crafts are presented in the following selection of photos.






As you can see, to please yourself and your loved ones, you do not need to spend a lot of effort and money. Your desire, creativity and inspiration can work wonders. And the result of work done by one's own hands cannot be compared with purchased accessories and other store items.

Do you like needlework? Tell us about your favorite creative masterpieces.

There are different ones, some are made of paper, others are made of wood, and still others are made of both, and even with the addition of a third. This section contains exactly those that are commonly called the simplest, they are the result of the simplest actions and do not require serious professional skills and knowledge. Although it is immediately worth noting that not everything is as simple as it seems. Therefore, even when making the simplest crafts it is important not to relax and clearly follow all the instructions that are presented in our articles. In more detail, this section contains information about the manufacture simple homemade from paper, clay, matches, plastic bottles, cans and from many other publicly available materials. By the way, we even have an article about how to become a house general and a vampire. It is important to note that almost all of this section does not involve spending money. Here you can find many options for making various children's crafts, as well as crafts for everyday life, for example, key rings. In addition, here you can find the option of making a gift for your family or friends, and especially for a child. Everyone can do what is presented here, so you need to start with the manufacture of homemade products that are in this section.


Astronomy is a very rare hobby that is not suitable for everyone. But everyone wants to watch the stars and the moon. But if you have a growing child and also very inquisitive, then the best gift there will be a telescope.


Apple iPhone 6 16 Gb is an iPhone with a completely redesigned design compared to previous generations. A fundamentally different approach! Miniature gadgets that are easy to operate with one hand have been replaced by a smartphone with increased dimensions (height 138.1 mm, width 67 mm), which will have to...


Cross-stitch is a popular activity for many needlewomen. The process itself is quite simple, does not require large expenditures, and also has a good effect on nervous system. The result of such work is always pleasing to the eye ....


Sewing machine often becomes the center of family comfort. Housewives, even stylists, and all those who aspire to make their own small family business out of sewing spend a lot of time behind it....

A summer cottage is the territory where you can give yourself the freedom to conduct numerous experiments and dream up plenty. This is manifested not only in interior design, but mainly in the design of the garden or vegetable garden. Inquisitive and resourceful owners have not been guided by expensive and standard methods for arranging their sites, since there are a lot alternative solutions virtually all areas of activity.

There are several varieties of vertical beds that allow you to optimize the use of free space. Custom designs are a great opportunity to create interesting design garden, orchard, suburban area.

This type of beds is in most cases used for growing ornamental plants or herbs.

Materials for manufacturing:


The length of the drainpipes is adjustable in accordance with the wishes of the owner of the site. However, bulky beds should not be made, as they can complicate movement around the territory.

Creating a bed

Stage 1. Create a container. To do this, we take a drainpipe, cut it in two lengthwise and put on special plugs on both sides.

Stage 2. We take the prepared metal holders, put them on the resulting frames for the beds.

Stage 3. We make holes in the pipe. They are made in those places where there will be metal fasteners.

Stage 4. We pass a cable or a strong rope through the holes made.

Stage 5. We fix the cable / rope with fasteners.

Stage 6. We fill the resulting beds with expanded clay and soil.

Stage 7. We plant plants in the beds.

Stage 8. We hang pipes to the chosen place. Sometimes a special wooden crossbar is placed for this, more precisely, a design in the shape of the letter “P”.

Step 9. Alternatively, you can make a special design for the pipes.

Important! A drainpipe bed is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four sides by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.

A bed made from a plastic bag is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.

Materials for manufacturing:

  • durable polyethylene film;
  • sewing machine;
  • priming;
  • seedling.

In order for the bed to turn out to be strong, it is recommended to pay special attention to the thickness of the plastic film, which in this case will act as the "frame" of the structure. The minimum film thickness is 0.2 mm.

The process of creating a polyethylene bed

Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the created beds. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the beds is twenty centimeters.

Step 2. Sew the rectangles together, leaving only the top of the bag unconnected.

Step 3. We sew a handle to the future bed, the strength of which will withstand the weight of the bag filled with soil. It should also be noted that when watering, the weight will increase.

Step 4. Fill the bag with fertilized soil.

Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary in order to plant seedlings in the garden.

Step 6. We plant seedlings.

Step 7. Water the soil regularly and add the necessary fertilizers.

With these simple steps, you can get a cheap and useful garden bed.

An integral element of each suburban area is a compost heap. This is the place where all kinds of biochemical reactions take place that ensure the creation of fertilizers.

To create fertilizers that will satisfy all the requirements for them, several key steps should be carefully considered: creating a container and directly making the compost itself correctly. Let's talk about each of them in more detail.

Stage 1. We take eight supporting posts of the same length.

Stage 2. We process the lower part of the wooden posts with engine oil or tar.

Stage 3. We dig the posts into the ground so that they are reliable and stable. If the compost bin is located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.

Stage 4. Between each two adjacent columns we nail the crossbars in such a way that in the end we get three independent sections. Be sure to leave gaps that will serve as ventilation holes.

Stage 5. In two sections, horizontally nail the boards to half the height of the pillars. In these places, it is planned to create two small doors.

Stage 6. There will be a large door in the remaining section, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.

Stage 7. Install the covers. To do this, you can use one large solid board.

Stage 8. We install the doors prepared in advance.

Stage 9. We provide doors with handles and latches.

Stage 10. We process wood using special impregnations.

Stage 11. We paint the box in any color that matches the preferences.

Many gardeners mistakenly believe that any components can be dumped into the compost heap. In fact, in order to create the right biofertilizer, the “ingredients” must be carefully selected.

Among the mandatory components of the compost heap are the following components:

  • peat;
  • ash;
  • needles;
  • tree branches;
  • leaves;
  • hay or grass;
  • wood ash;
  • plant roots;
  • raw vegetables and fruits, etc.

All elements are randomly mixed in the heap. To speed up chemical reactions, it is recommended to cover the pile with a tarp (this is especially true in the absence of a box).

Trips to the country with the family suggest the presence of entertainment elements on the site that will delight children. The most common way to occupy young summer residents is a swing.

Building a swing yourself is not an easy task, but quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build comfortable structures with a comfortable seating area.

Structural components:

  • two logs;
  • strong rope.

Indicators:

  • log diameter - 85 mm;
  • log length - 700 mm;
  • the distance between the ropes is 500 mm.

Making a swing

Stage 1. We stretch the ropes between the logs.

Stage 2. We wrap each log with ropes.

Stage 3. We release the ropes out.

Stage 4. We tighten the ropes by 3 knots.

Stage 5. We fix the swing on the tree.

Important: such a swing is designed for only one person.

Garden path from improvised materials

There are several types of garden paths that you can easily do with your own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. We line the space with corrugated stripes.

Step 4. Paint the track with paint.

Step 5. Sprinkle with stone chips.

This is an economical option for those who do not want to rack their brains and spend time on a full-fledged garden path. Tire track is usually used for vegetable gardens, as it easily fits into the ground.

Stage 1. We paint the corks in different colors.

Stage 2. We dig a small trench.

Stage 3. We drive in supports to strengthen the future track.

Stage 4. We construct formwork using boards.

Stage 5. We install spacers along the edges of the trench.

Stage 6. We place crushed stone deep into the trench and carefully tamp it down.

Stage 7. We make a solution of sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. We press the plugs in random order. Smooth multi-colored stripes look interesting.

These are the simplest and quick ways make a garden path without purchasing expensive materials.

DIY tools

The expression “everything will come in handy in the household” turns out to be as relevant as possible when we are talking about canisters. From this plastic container can be done a large number of indispensable tools that are actively used in the process of dacha work.

To make this tool, we only need a sharp knife and a container directly.

Stage 1. Cut off the bottom of the canister.

Stage 2. We mark the cut line for the scoop on the container so that the handle from the canister is the handle of the future tool.

Stage 3. Cut off excess material.

As a result of these simple steps, we get an excellent scoop with a comfortable handle.

Materials:

Manufacturing

Step 1. Thoroughly wash the canister so that no odor remains in it.

Stage 2. We cut the canister vertically into two parts.

Stage 3. We make a groove on the plank using a woodworking machine.

Stage 4. We apply glue to the plywood and insert it into the bottom of the canister.

Stage 5. We paint the resulting shelf with a can.

Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.

Materials:

  • 40 canisters;
  • scissors;
  • rope;
  • paper;
  • marker.

Stage 1. We pierce the top of the cans with a knife.

Stage 2. We make a stencil out of paper.

Stage 3. We apply it to the canister, circle it with a marker.

Stage 4. Cut out large holes with scissors.

Stage 5. We put the prepared canisters in several rows, tying each row by hooking the rope under the handles of the containers.

Stage 6. We tie the entire rows around the perimeter for greater strength.

Stage 7. If the cabinet is planned to be leaned against the wall, then we drill it to the surface.

Stage 8. We put heavy objects in the bottom row - stones or bricks.

The result is a fairly roomy and functional rack that will help get rid of the issue of storing many small parts.

Be resourceful and bold in implementing your ideas. Good luck!

Video - Do-it-yourself homemade products for summer cottages

Video - Do it yourself for a summer residence