Swans from plastic bottles for the garden. Handsome swan: making crafts. Swans from plastic containers, a master class with a photo

09.03.2020

Often made very beautiful craft- do-it-yourself swan for the garden. Now it is very fashionable to decorate your home with crafts. handmade A: It is elegant, popular and beautiful. The garden deserves special attention. A swan and a flower bed, for example, carry the energy of the owner and bring him success, because it is not in vain that such great attention is paid to this.

Figures of swans made of wood, clay or tires can decorate any suburban area.

Particularly demanding people can make a decor element to their liking, adding designer highlights and a personal vision of decoration to it. Yes, and the fruits of their own labor are pleasing to the eye and pride. An unbridled desire to create can turn into a masterpiece of art. Thoughtful inventors have adapted to make sculptures from improvised materials. This is considered a trendy, ecological direction in decorating. Without special material and time costs, you can make a unique decoration for the garden.

The swan is the embodiment of all positive qualities and characteristics, therefore many wish to have his sculpture in their garden. The high cost of finished products and doubts about their quality and service life make you think and put your imagination into action.

Materials for manufacturing

To make a sculpture of a swan for the garden, improvised materials are used. These can be damaged rubber tires, tires, plastic bottles, spoons, bags, wood, stones, Construction Materials and aids.

Swans can be assembled from petals cut from plastic bottles.

Very famous options for crafts from plastic bottles, which are durable and versatile in use. Used tires can be used in a similar way, you just need to cut and paint the material correctly. Such sculptures can be of practical importance, since they can act as a pond, flower garden or flower bed, but they are also an aesthetic decoration that emphasizes the theme of the garden. Plastic bags do not have a long service life, but can compete with other materials.

Wood is a less used material that requires skill and sleight of hand. It is available for use only by qualified professionals. Stones, due to material costs and physical effort, compete with other materials, but are distinguished by durability, exquisite style and elegance. Construction batches can be useful in this matter, because they are affordable and affordable; special attention should be paid to gypsum and cement mortars.

Back to index

Rubber tire swan

Old car tires can be given a second life by finding a great use for them in the garden. So, from them you can make one of fairy tale characters. A rubber tire swan is the most affordable and economical way to decorate a garden, because old tires will also come in handy here. Probably, everyone met one of these in crowded houses. So, to make a swan from tires, you should acquire a tool. First you need to prepare the work surface, lay it out so that you can work without polluting either the product or the workspace.

The next step should be the direct selection of the material. You should choose the most worn tire with a longitudinal pattern for ease of working with it and painting finished product. Next, you need to thoroughly clean it from any dirt, dust and other interference in operation, dry it. So, we prepared the material for further processing.

Then you should mark the surface of the tire into parts and cut it with a jigsaw along the contour. For the manufacture of the product, you will also need a metal rod, drill, wire and pliers. These improvised tools can be found in any owner.

Marking is carried out on an already cleaned wheel. Initially, it is necessary to draw the outline of the future swan with chalk and cut it out with an electric jigsaw. You can use a sharp knife, grinder and other handy tools. At the same time, it is important to remember about safety and not to neglect elementary rules in order to avoid injury and other troubles. It is best to move from head to tail in parallel lines for the convenience of using auxiliary tools. The edges of the trim must be processed - smooth with a knife or grinder.

Then it is necessary to turn the product inside out and form the body of a swan, the bend of the wings and neck. This will help to make a metal rod or wire fixed at the base of the tail and along the body. Then you need to give the product appearance, painting it in certain colors, highlighting the beak and eyes. Installation of the work is the final stage of production. To do this, you can use another tire or hemp.

We fix the swan and decorate with lush vegetation, colorful flowers. It is known that in nature swans are devoted lovers, therefore it would be appropriate to make a pair of swans. They will perfectly decorate a garden, a pond, a flower bed, an abandoned stump and complement the decor.

Back to index

Swan in the garden from plastic spoons

Plastic spoons are a very cheap and durable material. So, you need to stock up on plastic spoons of the same color, preferably white, clean them and prepare for work.

A swan for a summer residence can be made from plastic spoons.

First of all, you need to make a swan frame, on which the spoons will be attached.

It can be made from a plastic bottle or wire and wrapped with bags, paper and tape, shaping.

Then you need to form a silhouette of a swan, pointing its head, beak, spreading its wings, and glue the silhouette with spoons on the inside to the product.

This will create the effect of plumage and decorate the appearance of the craft. The beak must be highlighted in a different color, draw the eyes. You can fix the product on a stump or other part of the garden, providing for windy weather and rains.

I present to you my new craft for the garden - a flower bed made of bottles. It is good because the materials are very affordable, and the result is pleasantly pleasing to the eye. This craft is suitable for a garden, a summer residence and for a kindergarten.

Materials:

Plastic bottles 15-25pcs of the same volume
Plywood
jigsaw
Sandpaper
White paint
Acrylic paint or other
Insulating tape

Flower bed from bottles (production stages):

Since the flowerbed of bottles will be in the form of a swan, it is better to start by cutting out the swan's neck. I’ll tell you how I did it: I drew the neck directly on the plywood, it’s better to make it longer, then I sawed it out with a jigsaw, and processed the edges with sandpaper.

If you do not have plywood, then you can make a foam neck by covering it with putty, but this option is less durable.

Next, let's take a look at the bottles. As far as you have probably noticed, the number of bottles is written approximately, the thing is that it directly depends on the desired size of the flower bed. At the place where you want to place the flower bed, it is better to dig up the ground, then stick the bottles (neck down) placing them in the shape of a circle or oval. In the place where the swan will have a neck, we leave a small gap between the bottles. Next, we wrap the bottles with electrical tape, thereby fixing them. We insert the neck of a swan.

We paint the bottles and the neck of the swan, spray paint is best suited for these purposes. After the paint has dried, draw the beak and eye.

How to make different crafts from plastic bottles for summer cottages and at home?

For most people, a plastic bottle is just trash that clutters up the house. But in skillful hands, this, at first glance, worthless thing can turn into a very beautiful, and most importantly, unique decoration for a personal plot.

The big advantage of such man-made decorative objects is their cheapness, which is why the family with the smallest income can afford to decorate their living space with such decor. If you are interested in such an idea, then let's figure out together what can be made from empty plastic bottles.

What can be done from plastic bottles with your own hands?

Simple swans from plastic bottles

Flower from plastic bottles

Lake made of plastic bottles

plastic bottle decoration

Chandelier from plastic bottles

Flowers from plastic bottles

plastic bottle toy

Fence from plastic bottles

Until recently, with the help of plastic bottles, they gave the outline to flower beds, beds and garden paths. But over time, craftsmen realized that plastic is a very malleable material from which many beautiful things can be made. Therefore, people began to experiment and beautiful voluminous flowers, garden lamps and chandeliers, various kinds of coasters, vases, candy bowls and even full-fledged fences began to be obtained from unnecessary garbage.

To create all these masterpieces, the craftsmen used bottles of different sizes and shapes, cutting blanks out of them, carefully connecting all the details together, and then painting them with paints in desired color. Yes, and remember that plastic can not only be cut, if you take a blank and hold it a little over heat (an electric stove or a lit candle), then you can make very beautiful three-dimensional compositions with perfectly rounded details.

Swan from plastic bottles

plumage manufacturing

On the Internet, you can find many different ways manufacturing plastic swans to decorate the garden. But, unfortunately, all of them are quite complicated and therefore, in most cases, they are not entirely clear to people who have never done needlework. That is why we decided to introduce you to the method of making a swan, which absolutely everyone can handle.

Materials for making a swan:

One five liter bottle
Up to fifteen bottles of milk or kefir (needed to make plumage)
Wire and scissors
piece of hose
Finished product paint

Making a swan:

So, for starters, we take a black marker and draw lines on the bottle, along which an opening will subsequently be cut out (it will be possible to insert flower pots into it). You can see how to do it right in the picture above.
Next, take a piece of hose of the desired length, insert a thick wire into it, and then use your hands to shape the workpiece into a shape that will visually resemble the neck of a swan. Insert the finished workpiece into the neck of a five-liter bottle.
At the next stage, proceed to the manufacture of the feathers of our swan. To do this, cut blanks imitating a feather from milk bottles. And to make it look as natural as possible, cut it along the edge with sharp scissors, and then heat the resulting fringe over a lit candle (this will help fluff the feathers).
After that, we cut off the neck and ass of several milk bottles and put them on the hose (we make an imitation of a swan's neck). In the outermost bottle, we cut off only the ass, and leave the neck in place, and form the head of our decorative bird from it.
At the final stage, we take the previously prepared feathers and carefully glue them to the resulting body. We do this in such a way that there are not even the slightest gaps between them.

Pigeons from plastic bottles

I want to say right away that if you want to reduce the time for making pigeons, then use white milk or kefir bottles to create such decorative objects. In this case, you will not need to paint over absolutely the entire blank, it will be enough to decorate its head.

So:

Prepare a standard milk bottle and cut the neck as shown in the master class
After the body of the dove is formed, we proceed to the manufacture of its head.
To do this, we take a piece of thick foam plastic and, with the sharpest knife, cut out a blank that visually resembles a bird's head.
At the next stage, we proceed to the manufacture of dove plumage
You can also do this as shown in the master class or by the method that was used to make the plumage of a swan.
After the feathers are ready, make a small hole in their lower part and fix the wire in it
On the last step connect all the blanks together and correctly paint the dove's head with paints

Peacock from plastic bottles

Torso of a peacock

Making plumage for a peacock

plumage mount

tail making

head making

Making Peacock Legs

final assembly birds

If you want to make a beautiful peacock, then you will have to be patient. Unlike a swan and a dove, this one requires plumage characteristic of it. And this means that in this case it will not be enough to cut the correct feathers. They will still need to be correctly connected to each other and only after that attach to the body of the future peacock.

Making a peacock:

So, for starters, make the body of a bird. To do this, you will need to use one five-liter bottle, two half-liter and two plastic sticks.
Next, move on to cutting out the feathers and shaping the large pieces of plumage.
When the plumage is ready, start making the tail. Be sure to consider the size of the body and make sure that it is not too big
When the tail is ready, start crafting a foam head (immediately paint it with paints)
Connect all the details of the peacock together and, if desired, install it on a heavy stand

plastic butterflies

Butterflies from plastic bottles

Cutting template No. 1

Cutting template No. 2

Cutting template No. 3

Plastic bottles are an ideal material for making beautiful and colorful butterflies. Depending on the size of the bottle you will use for this, you can get both very cute little butterflies, and very large ones that can be an independent object for decorating a garden or courtyard of a private house.

The best part is that making these insects does not require any special skills from people. All you need to do is stock up on bottles of the right size, scissors, paints and, of course, imagination.

To begin with, cut off the neck and bottom of the bottle (you should have the most pliable middle part in your hands)
Draw a butterfly on a leaf or find a suitable template on the Internet
Using a black marker, transfer the outline of the butterfly to the bottle
Cut out the drawing with sharp scissors and color it as you see it.
Ready-made butterflies can be attached to a wire, and then placed on flower beds or just on the lawn

Yes, and if you have stained glass paints, then you can paint the transferred contour on the bottle with them, and after they have completely dried, cut out a completely finished butterfly. Since in this case rather convex lines will turn out, you will have the opportunity to fill them with small rhinestones or sequins.

Ladybugs from plastic bottles

Ladybugs from the bottom of a bottle

If you want to make a ladybug as quickly as possible, then stock up on bottles of red (1 pc.) And black (2 pcs.), As well as an ordinary stapler. One bottle will imitate the body of an insect, and from the other you will make characteristic points.

So:

Cut out a blank imitating wings from a red bottle
Next, take a black bottle and cut mugs out of it.
On one of them draw beautiful eyes and attach to the bottle cap
Use a stapler to fix the remaining black circles on the wings of a ladybug
At the last stage, attach the wings to the bottle and the craft will be ready.

If you wish, you can make a similar insect from plastic covers. To do this, you just need to take the paints and paint them correctly. So small ladybugs will become wonderful decoration plants that grow in pots.

Owls from plastic bottles

An owl from a plastic bottle, made by the method with which we will now introduce you, can be both complete flower pot, and the original planter, which can either be placed on the floor or hung on the summer veranda.

To start, cut upper part bottles
Using paints, give the workpiece the desired color
Next, take a simple pencil and draw a drawing on it that will imitate the face and plumage of an owl.
Using a plastic cutting knife, give the craft the desired shape.
Add volume to the owl with contrasting lines

Yes, and if in the future you want to use such a craft exclusively as a flower pot, then do not cut holes that imitate plumage. You can achieve a similar visual effect with paints, just by drawing the feathers correctly. Such a pot can be used for growing indoor flowers or for growing spices.

Pig from plastic bottles

As you already understood, crafts from plastic bottles can have several purposes at once. A plastic pig is no exception, so it can be a flower pot, a flower bed, or a full-fledged decorative object.

If you want to make a pig solely for decoration, then proceed as shown in the master class. If in the future you plan to plant plants in it, then prudently cut an opening of the desired size in the upper part of the workpiece and further reinforce it with a plastic rim.

So:

Cut off four liter bottles neck (these will be the legs of our pig)
We fasten them to the wire, and then we fix them on a five-liter bottle
Next, cut out rounded blanks from the middle part of the plastic bottle (these will be the ears of the pig)
We attach the ears to the top of the bottle closer to the neck.
At the next stage, we cut out two small circles and fix them on the muzzle of the pig
At the very end, we paint the entire workpiece in a delicate pink color and, using white and black paint, draw the eyes of our pig

Daisies from plastic bottles

If you want to decorate your home or garden with flowers that will delight you all year round, then try to make them from plastic bottles. Now we will teach you how to make very beautiful and, most importantly, the most realistic daisies that will become the most beautiful decorative object in your home. It is best to make them from white milk bottles. Since they are more malleable, it will be much easier for you to form thin chamomile petals from them.

Simple Tips:

First of all, cut out circles of the same diameter from the middle part of the plastic bottles.
Next, start to form the flower itself from them.
To do this, first divide the circle into four parts.
Further, each of the four segments is again divided into four parts
If you do everything right, you will have 16 perfect petals.
In the next step, take nail scissors and carefully round off the edges of the petals.
After that, cut a small circle out of plastic and cut it along the edge.
Hold this blank over the candle until the edges begin to fluff
Paint the resulting workpiece yellow
From a green bottle, cut out a star of the correct shape (it will imitate the sepal of a flower)
Cut out characteristic leaves from the same green plastic
Take the wire and wrap it with satin ribbon or corrugated paper
Connect all the details together and the chamomile will be ready

Roses from plastic bottles

Roses can also be made in the same way. Petals and stem can be made in the same way as for chamomile, but the bud itself will need to be crafted a little differently. In this case, you will need to cut a rectangular blank out of plastic and divide it exclusively into four parts. Another nuance in the manufacture of a bud is the twisting of the ends of the petals. In this case, you will need to heat the workpieces more than usual, and then use a round wooden stick to give them the desired shape.

If you refuse to carry out this stage, then in the end you will not get a rose, but a poor flower that can hardly be used to decorate a house or garden. Oh, and remember, if you need to paint the plastic, then you need to do this even before you start connecting the petals into a bud. Since the finished blank will turn out to be quite voluminous, you simply cannot paint over it as well as possible and, as a result, your rose will have ugly gaps.

Palm tree from plastic bottles

Top making

If you want on your personal plot flaunted, then you do not have to buy expensive seedlings and wait for years until they grow to the desired size. If you wish, you can make such a tree from plastic bottles in brown and green:

So:

At the initial stage, make a barrel from bottles
To do this, cut off their bottom and neck, and then start inserting the bottle into the bottle
When the hollow blank is ready, reinforce it with a wooden stick or an iron rod.
Next, we begin to make the top of the palm tree
To do this, cut off the bottom of the bottles, and then cut them into thin strips.
Inside these blanks, you will also need to insert flexible rods or a plastic hose
At the very end, you just have to fix the top on the trunk and securely fix the palm tree on the flower bed

Plastic vases for natural or artificial flowers

Decoupage plastic vase

Vase with pattern

Vase with weaving

The easiest way to make a vase from a plastic bottle is to simply cut off the neck and then paint the entire surface of the resulting workpiece in the desired color. And to make such a craft look more impressive, you can additionally paint it with a floral ornament or paste over it with rhinestones and sequins.

Decoupage plastic vase:

Take a two liter bottle and cut off the top of it.
Thoroughly coat the outer part of the workpiece with PVA glue, and then attach the selected napkin to this layer
Gently level everything with a soft brush dipped in glue, and wait for the top layer to dry completely.
Next, take a decorative ribbon that matches the color and style and use glue to attach it along the edge of the neck of the vase
If desired, you can additionally decorate the vase with beads and ribbons.

Pouffe from plastic bottles

Pouffe from plastic bottles

A little higher, we have already told you how you can make various decorative decorations for your home and garden from empty plastic bottles. And now we will teach you how to make a soft pouffe out of plastic, which will decorate any interior.

But remember, if you want to end up with the perfect product, then use bottles of the same size to make it. If you make a pouf at the same time from one and two-liter bottles, then you definitely won’t be able to create something of really high quality.

So:

To start, prepare 16-20 bottles of the same size
Using adhesive tape, fasten the bottles in pairs
When you cope with this task, form a circle from the blanks and also fix everything with tape
Measure the diameter of the workpiece and, based on these data, cut out two circles from thick cardboard
Place the bottles between them and wrap everything with tape again
At the next stage, cover the workpiece with foam rubber and carefully sew everything with small stitches
From suitable material sew removable cover and put it on an ottoman

Broom from plastic bottles

For the manufacture of a broom, it is best to take two-liter bottles. Their dimensions allow you to create a fairly voluminous fringe, which effectively fights with garden debris.

First, find a smooth stick that will mimic the top of a broom.
It will be better if its diameter allows you to put a plastic blank on it
Next, take a bottle and cut off the bottom of it.
Then, with sharp scissors, cut the workpiece into strips, without reaching the neck.
Make several blanks in this way and insert them one by one into each other
Secure everything with wire and put on a smooth wooden stick

Mosquito trap from a plastic bottle

As you probably already understood, a plastic bottle in skillful hands can turn into a rather beautiful and original thing. But apart from decorative elements this material can be made for mosquitoes, which can be placed both inside the house and on summer terraces. You can see how to make this wonderful device in the figure located a little higher.

Remember, if you want the trap to do its job as well as possible, the liquid in it must be changed every day. It is advisable to do this in the late afternoon, after draining the old one from it and rinsing the container with clean water. If all these nuances are observed, you can forget what mosquitoes are and enjoy calm nights even in the wettest period of summer.

Video: What can be done from plastic bottles for a garden and a country house?

The graceful bird has always fascinated with its grace. It became possible to place a symbol of fidelity in your garden, having everyone at hand available material. Information on how to make a swan from plastic bottles, offered in three options, will allow everyone to choose the most appropriate way.

Swan planters from bottles

Crafts based on plastic bottles differ in different categories of complexity. A step-by-step guide will help even a novice master to cope with the task of decorating a swan. The main thing is to be patient. One bottle of 5 liters and a lot of white plastic containers with a volume of 1 liter are the main material of a spectacular craft. You will also need:

metal rod for the swan's neck;
fishing line, adhesive tape and thin wire for connecting individual parts;
metal mesh serving as the base of the wings.

Preparation of individual parts

The making of a swan precedes preparatory stage. Work begins with the cleaning of plastic bottles from the remnants of labels and glue. On a clean container, markings are made according to the photo. The upper line is drawn 2 cm below the neck, the lower line is 1 cm higher than the corrugated part of the plastic bottle. There is a perpendicular line between them. The cut is made as straight as possible.

For the neck, parts from plastic bottles with a neck are cut into 6 parts, cylindrical elements are divided into 8 fragments.

Attention! All corners on the blanks are rounded, 3 paired holes are formed at the base of the petals.

A neat swan head is obtained from a 0.5 liter plastic bottle as follows:

the neck with the cork is removed;
on a cone-shaped section, an incision is made along the seam;
all other incision lines go with a gap of 0.5 cm;
the ends of the clothespin, which will play the role of a swan's beak, are melted over the fire;
holes are pierced on them with an awl, holes are formed at a similar distance in a plastic bottle.

The basis of the swan's body is a 5-liter container, on the bottom and lid of which holes are made to fix the neck. The opening on the side should allow the hand to easily get inside the container.

Assembly process

When the individual elements of the swan are decorated, you can proceed to the assembly of parts:

The result of a painstaking process will be a spectacular swan made of plastic bottles, similar to the photo below:

Combination with tire

There is another interesting and affordable option for making a bird with a majestic neck bend.

Frame

According to the proposed master class, a swan made of plastic bottles will turn out to be no less bewitching. The main difference is that the function of the trunk is performed by a tire with a diameter of 50-55 cm.

Hull shaping:

The cover is cut in half. Work carefully so as not to injure yourself with the cord.
One part is shortened by 10 cm.
Both parts are connected in the shape of an egg about 45 cm wide and securely fixed.

The result will be the workpiece shown in the photo:

Head

Making a swan head:

The basis of the part is polystyrene 20x12x10 cm.
The head with the beak, after cutting out, is carefully polished with sandpaper.
A 5 cm deepening is prepared at the back of the head to fix the neck.
The swan's head is evenly treated with putty.
After the solution has dried, the surface is polished with paper of a finer grain size.
The workpiece is coated with white, black and blue paint. An example is the following photo:

Neck

The process of creating a bird neck based on plastic bottles:

A rod about 2 m long is given the desired shape.
Advice! It is better to refuse a steel part, it is too difficult to bend and can burst.
Corrugations will need about 80 cm. When using old material, it is thoroughly cleaned of contaminants.
One edge of the corrugation is made with cuts for mounting the swan's head.
The swan's neck is fixed to the body and head with self-tapping screws.

Plumage

For the plumage of a swan you will need:

plastic white bottles - about 40 pieces;
construction mesh;
pliers and knife;
wire, cutters.

Painting the mesh with white paint for outdoor use will help to avoid corrosive processes. One plastic bottle serves as the basis for 5-6 swan feathers. On each blank from a plastic bottle, 4 holes for the wire are prepared. Optimal use copper material which bends easily. Feathers are connected with overlapping wire to hide the connection areas. The process of formation of the wings and tail of the swan is identical, the difference lies only in the outlines of the grid.

Mounting and installation

When all the parts from the tire and plastic bottles are ready, they begin to assemble the swan. The site where it is planned to locate decorative figure, is made out with bricks, a board or a car tire. This will be a kind of podium.

The connection of the neck with the body is carried out with self-tapping screws. The end of the rod is bent in such a way that it is possible to fix it in the ground. The wings are fastened together with wire, clamped at the back with a rod. Next, the tail of the swan is fixed. The head, made from a plastic bottle, is screwed to the corrugation with screws. An elegant bird made of plastic bottles with your own hands will become a worthy decoration of the site.

Grace in the garden

Another craft option based on a large plastic bottle also has practicality, thanks to the possibility of placing flowers inside.

Basic manufacturing steps:

The swan is a symbol of fidelity, so it would be logical to make a beautiful bird a couple. This composition will not leave anyone indifferent.

The proposed master classes will help transform landscape design with minimal financial expenses. The main cost is your time and patience. Good luck with your work!

Birds from plastic bottles

Recreation area in the country

How to make a palm tree from plastic bottles

Garage design on site

Swans from plastic bottles

Making your own decor is an exciting experience. In addition, by recycling plastic, we make the planet cleaner. The easiest decoration to make is a swan on the lake. A neck with a bird's head is cut out of plywood and stuck into the ground. Near the workpiece, the body of a swan is formed from cut bottles, painted in White color. Around the figure are placed halves of blue containers, symbolizing the border of the reservoir.

Swan Lake looks better from afar, when only the outlines of birds are guessed

Gallery: plastic bottle swans

To feel like in a fairy tale, put a crown from a disposable cup on a swan A cute swan comes out of a corrugated pipe and milk bottles “Feathers” cut from milk bottles are screwed to the base with screws If you put cut bottle necks on a rod, we get the neck of a swan

Planter-swan from a plastic bottle

The advantage of the figure of this bird is that a flowerpot from a plastic bottle is easily placed on its back. As a result, the designer receives both a sculpture of a swan and a container for flowers.

What you need to make a figure

Before you start creating a swan, prepare the necessary tools:

putty knife;
knife or scissors;
container for mixing the solution;
sandpaper;
brush.

It is convenient to apply the solution on the planter with a small spatula

The frame of the sculpture is a large plastic bottle, on which a solution of plastic material is applied. The classic version uses gypsum, but some prefer putty. The first material dries well, so the pots are molded quickly. However, gypsum is less resistant to mechanical damage which may shorten the life of the product.

You can also sculpt a planter from alabaster - a variety of gypsum

To create a swan planter you will need:

five-liter rectangular plastic bottle;
a piece of plastic film 70x70 cm;
a piece of reinforcement with a diameter of 0.6 mm and a length of 80 cm;
gypsum or putty - 5–7 kg;
iron reinforcing mesh;
bandage;
primer;
oil paints (white, black, red);
sand.

Many planter makers prefer Rigips Perlitli putty because of its high plasticity.

The process of making planters-swan

Lay first workplace plastic wrap: it will protect the table and help make the bottom for the pots.

Step-by-step instruction:

1. Cut off the side of the bottle to make a flowerpot.

The side of the bottle is cut with a sharp knife

2. Make a hole in the cork.

You can also pierce a cork with a hot nail.

3. Bend the reinforcement in the form of a deuce.

The reinforcement is bent by hand, stepping on it with a foot in places where a bend is needed

4. Insert the end of the fitting into the bottle through the cork and fix it with tile adhesive or primer.

Some craftsmen advise fixing the fittings inside the bottle with tile adhesive.

5. Knead a thick solution and lay it on the film in the shape of the bottom of the planter.

When the putty dries, it becomes almost white

6. Place the planter on the solution and coat it using a spatula.

7. Attach a reinforcing mesh to the sides of the figure at an angle of 30 o. Fix it with mortar. Substitute stops so that the mesh does not slip.

The mesh attached to the sides of the bird will become the frame of the wings.

8. We pass to the neck of the swan: coat the armature with a layer of mortar.

Try to apply the mortar evenly on the reinforcement

9. Then wrap it with a bandage along the entire length.

Do not wrap more than one layer of bandage

10. Press the bandage into the neck and apply another thin layer of putty. Smooth out lumps with a brush.

11. Then we form the skull and beak of the bird. First, put a little solution on the head area and distribute it with a brush. Where the beak is planned, a wire is inserted.

Look at a photo of a live swan for proportions.

12. Then we wrap the head with a bandage in one layer.

It is better not to replace the bandage with a cloth, the solution must penetrate through the gaps between the threads

13. We press the bandage and apply another thin layer of the solution.

14. When the putty on the wings sets, we continue to improve them. Wet one hand, take some putty and apply to the outer side of the wing, supporting the reinforcing mesh with the other hand from the inside. Thus form both wings.

To prevent the solution from sticking to your hands, wet them

15. Smooth out the putty with a brush.

To prevent the solution from sticking to the brush, dip it in water from time to time

16. Go to the tail: a piece of reinforcing mesh 10x20 cm is slightly bent, attached to the back of the bird and fixed with a solution.

If the solution is thick, there will be no problems with fixing the tail.

17. We put a support for the tail frame so that it does not move.

To hold the tail frame in place, you can take an ordinary brick

18. Leave the figure to dry. The swan is almost alive.

Gradually, the swan takes on a real shape

19. After a day or two, we carry out the finishing touches. We increase the thickness of the solution where it is not enough: we thicken the base of the neck, round the head, give a natural look to the wings and tail. With wet fingers, a brush or a knife, we make stains on the wings of a swan, imitating feathers.

To avoid cracking, do not move the planter until dry.

20. Completely dry the figure for 2-3 days. We grind the pots with sandpaper and cover with a primer.

It is not difficult to create a unique decoration if you follow the recommendations of experienced craftsmen:

mix a thick solution;
each layer of the solution applied to the product needs to be dried;
at a time, gypsum is laid in a layer of up to 2 cm, and putties - no more than 1 cm;
if the pots remain to winter on the street, use frost-resistant mixtures;
before applying the solution to dried surfaces, spray them with water from a spray bottle;
smooth irregularities with a brush dipped in water;
at the end of the work, the sculpture must be covered with a primer, otherwise the paint will roll off in lumps.

Do-it-yourself planter-swan - video

The final design of the pots

After the primer dries, cover the craft oil paint. To achieve maximum naturalness, look at the photograph of the swan and copy the nuances of the bird's color.

The mute swan has a dark stripe from the eye to the beak.

The eyes are drawn with black paint, and the beak is red or orange.

Do not take your eyes off the finished pots

After the paint has dried, the sculpture is varnished for outdoor use. This will protect the swan from bad weather. You can not paint the bird, but simply varnish after priming.

A pot with a flower is placed in the finished flowerpot.