How to wash the plaque in the shower. How to clean and how to wash the shower from limescale. Types of shower cabins

24.11.2019

19.02.2017 1 3 627 views

Shower cabins are, of course, a very pleasant thing in every sense, but cleaning it is much more difficult than a bath. If you do not know how to clean the shower from limescale, do not worry.

There are dozens of ways to get rid of lime folk methods and special chemical detergents. We will tell you about the most effective of them.

Why does limescale appear in the shower cabin?

The main problem of our plumbing is the poor quality of tap water. As a rule, it has increased rigidity, contains a large proportion of metals and calcium salts. Then we see all this “goodness” on the shower cabin, in the lime deposits of watering can nozzles, and so on, and it’s not at all easy to clean them.

The higher the hardness, the more often you have to work to remove limescale. Modern high-quality filters could solve the problem. But if it is not possible to install them, then we recommend that you systematically clean the plumbing. With the right approach, cleaning the shower cabin will not take you much time.

Types of cleaning

If referring to household, as to science, and apply scientific methodology to cleaning, then three main types of “special operation” should be distinguished.

Daily cleaning - it requires elementary rules of personal hygiene and keeping order. If you took a shower, rinse the shower stall after you hot water then wipe it with a dry cloth. This is enough to keep the cabin clean.
Basic care - about once a week (if necessary, more or less often) wash the shower cabin with special-purpose household chemicals - for washing bathtubs and shower cabins. Go once a week with a soft brush around the corners of the cabin. Sponge especially dirty places, rub the glass. If you see a light limescale buildup in the shower, rinse it with plain soapy water (if it's thin and not old, that's enough) or use one of the special household chemicals. In a word, rub, wash, clean, but do not forget to thoroughly dry the cabin after completing wet cleaning.
Major cleaning - about once every few months, the shower in the bathroom requires a general cleaning. If you ignored the current cleaning, and your room is also damp, then you will have to deal not only with lime deposits, but also with mold. This problem also occurs when the apartment or house has not been used for a long time, and the shower stall was not ventilated. long time. During major cleaning, you will need special strong chemicals, because ordinary household chemicals may not be able to cope with heavy dirt, especially mold.

We use detergents

To effectively and quickly wash the shower, you need to use a gel, powder or aerosol for washing bathtubs and showers. Aerosols are especially convenient in application. They are easy to apply on vertical surfaces, spread easily and have excellent cleaning properties.

Apply your detergent to the area of contamination and leave for 10 minutes, then go over all surfaces with a sponge or soft cloth and rinse off the cleaner with water. Well, then rub the cabin dry.

To get rid of thick lime deposits, use stronger special preparations. However, avoid those that contain:

aggressive acids (for example, formic acid);
acetone and other solvents containing it;
formaldehydes.

Removing stains with such products can result in the plastic being melted. At best, turn gray or stained.

It is also not recommended to use coarse abrasive materials for washing the plastic elements of the shower cabin. They can leave scratches, where dirt will subsequently clog, fungus can form there, and then cleaning the shower well will be a big problem.

Folk methods

If you do not like to use household chemicals on the farm, you can use folk remedies. Experienced housewives always know how to wash the dirt in the bathroom or in the kitchen. This tool is in any kitchen and is used, as a rule, in cooking.

Soda! It is not only an excellent universal cleaning agent, but also has the ability to disinfect surfaces. Most often, soda is used in combination with other substances, which greatly increases its effectiveness.

Mix a glass of hot vinegar (about 40 degrees) and 1 tablespoon of soda and wipe the places where you notice lime deposits with this solution. Wipe well and rinse with water.
You can use only vinegar, no soda. But be sure to warm up.
You can use only baking soda, but it can leave scratches on soft plastic.
For soft plastic it is better to use toothpaste. It perfectly cleans metal and chrome surfaces. With it, you can rub taps, hoses and a watering can to a mirror state.
Vodka is good for washing mirrors. Spray with an aerosol pure vodka or diluted with water in a ratio of 1: 2, then rub the mirror to a shine.
If you have not only limescale, but also mold, you can not do without ammonia, or ammonia. Mix 100 g of ammonia with 50 g of soda, 50 g of vinegar and pour 2 liters into this mixture hot water. This thermonuclear liquid will help you to remove mold without effort.

After such treatment, be sure to ventilate the room and wipe the surfaces dry. And in general, any household chemicals can only be used in ventilated areas, otherwise you can get poisoned by harmful fumes.

Washing a shower cabin from plaque at home is not as easy as it might seem. The fact is that these sanitary boxes are created from a variety of different materials, differing from each other in the rules of operation and the nuances of cleaning.

Which cleanser should you choose?

Depending on the properties of the surface to be cleaned, the individual remedy household chemicals suitable for a specific surface and coating. The shower room consists of different materials:

the body and doors of the box are mainly made of plastic or glass;
the shower head is made of chrome steel or aluminum;
the water drain pan can be acrylic, metal or ceramic.

Therefore, every detail requires a careful approach to its cleaning.

Abrasives

Whatever material is used in the manufacture, it is strictly forbidden to wash the shower cabin with abrasives. Such tools can quickly spoil the appearance of a plumbing device and nullify all efforts to care for it. Abrasives scratch the surface when cleaning, causing irreversible damage.

Mechanical methods

If the choice fell on the mechanical method of removing limescale, you can use a special scraper made of rubber or polyurethane or an ordinary sponge (rag).

When choosing a cleaning agent, formic acid and gasoline and acetone-containing chemicals should be avoided.
A cleansing spray would be the best solution. It will successfully remove even strongly pronounced dirt and does not require rubbing during use. Simply spray onto the surface to be cleaned and then rinse with running water.

Shower cabin cleaning

It is obvious that slight contamination, unlike stubborn plaque, can be easily and quickly washed off. The most correct solution is to prevent the formation of unwanted deposits, for this it is necessary to thoroughly wash the cabin after each visit. In this case, the problem of old plaque accumulations simply will not arise.

Basic rules of operation

To maintain the cleanliness and freshness of the shower, there are a number of rules:

After taking a shower, rinse the walls and the tray first with hot, then cool water to completely wash the shower cabin from soap stains.
Clean the walls of the box with a rubber scraper from moisture.
Use a soft cloth to wipe the entire cab dry.
Clean your shower room weekly with shower gels.
Thoroughly clean the plumbing fixture monthly, brushing every hard-to-reach area.
Metal parts, each time after use, are washed and wiped thoroughly.

Such regular care will ensure the original radiant appearance of the cabin. However, if the plumbing device is in a state of disrepair and has acquired an unpresentable appearance, prevention will no longer help: a more serious impact on pollution will be required here.

Cleaning the plastic walls of the box

Plastic surfaces are especially prone to contamination, because the material has absorbent properties. In the process of caring for such shower cabins, aggressive detergents should be excluded:

acid-containing;
containing formaldehyde;
containing solvents.

The steam cleaner perfectly removes dirt, eliminating even hard-to-reach places from dirt.

Washing the shower tray

If the pallet is made of porcelain stoneware, it is enough to wipe it dry with a soft microfiber cloth, on which an agent for processing artificial stone has been previously applied.

If the pallet is acrylic, you should choose a safe, gentle product that does not contain abrasive substances.

Suitable chemicals are creams and gels that gently remove soap stains and lime deposits.

Cleaning the enamel pan is quite easy as the material does not absorb dirt. Various powders, gels and sprays are used for washing.

Getting rid of mixers from lime

Chrome-plated steel used in the manufacture of faucets is particularly susceptible to lime deposits. In addition, steel is easily damaged and loses its luster. Therefore, gels and creams that do not contain abrasives are most suitable for processing capricious metal.

If the mixer is aluminum, it also requires care in handling and the absence of abrasive substances in the composition of care products.

Folk remedies and their use

Eco-friendly, safe and cheap, these methods of cleaning showers are very popular.

Composition with citric acid

Citric acid perfectly copes with any deposits on glass and plastic surfaces, including soap and lime. To prepare a cleansing composition, dissolve 1 packet of powder in ½ cup of water. citric acid or juice of 1 lemon. Spray the product obtained with a spray gun throughout the cabin and, after waiting about 15 minutes, rinse with cool water. If plaque remains, the acid concentration will need to be increased.

Method with the use of soda

Fizzy drinks are a great way to clean your shower drain. Coca-Cola is best suited for this purpose, but you can use Sprite or Fanta. Any of the drinks is abundantly applied to the surface to be treated and left for 30 minutes. Then wash off with cool water. Soda is a thunderstorm of mineral, lime deposits and rust.

The use of alcohol tinctures and vodka

Soap stains that have covered the shower cabin easily remove ethyl alcohol. Tincture or vodka is mixed with water in a ratio of 1 to 2.

The resulting composition is effective against glass surfaces and chromium products.

Ammonia in the fight against soap scum

Soap stains are perfectly removed with ammonia. It is used both alone and in combination with vinegar and baking soda: ½ cup of ammonia should be mixed with 1 tablespoon of vinegar essence or baking soda in 1 liter of water. Then apply the product to the dirt, leave for 1 hour, then thoroughly wash the shower cabin with running water.

Baking soda and hydrogen peroxide to clean a plumbing fixture

This tool will not only perfectly cope with lime, but will also help to clean every corner of the shower cabin from mold: soda is liberally applied to places of pollution, left for 1 hour. After waiting for the necessary time, carefully wipe the treated surfaces with a sponge and apply hydrogen peroxide, after which the box is ventilated. This technique saves cabins from fungus.

Vinegar essence as a remedy for pollution

Soap streaks and lime remove the means available to everyone - vinegar. The liquid is diluted in water in a ratio of 1 to 1, after which it is applied to the places where dirt accumulates. The composition is left for at least half an hour. After the required time, the treated surfaces are cleaned with a sponge and rinsed with running water.

Cleaning surfaces with toothpaste

Every home has a toothpaste - an unsurpassed cleaner of dirt of any origin. The method is simple: a product is applied to the contaminated surface using an ordinary sponge. If the dirt is old, the paste is left for 1 hour, after which it is thoroughly washed off.

The quality of water, as well as the use of various gels, shampoos and soaps for water procedures, affects the cleanliness of the shower cabin. Soap stains, limescale and fungus spoil the appearance of the plumbing fixture.

Every hostess wants to keep the bathtub clean, so it is very important to know all the rules for washing and caring for plumbing fixtures. Today we will talk about how you can clean the shower stall and what needs to be done to keep it in its original form.

The shower cabin consists of several parts made of various materials Therefore, an integrated approach is used to clean up contaminants. This takes into account the material of manufacture, as well as the presence of a hydromassage panel and other devices.

For cleaning use:

a synthetic sponge or a special brush for washing;
scraper with rubber coated for glasses;
a microfiber cloth;
cleaning products in the form of sprays, pastes and creams.

a sponge made of metal threads;
sharp scraper;
detergents with ammonia and acetone;
abrasive powders.

With daily care general cleaning can be done once a month. Cleaning usually starts with the walls and doors, then wash the faucets, handles and hinges.

Actually last step tray is being cleaned. Some showers have a base that is covered with a special screen - it is wiped last.

Faucets, watering cans, hoses and fittings also require maintenance. They are washed from limescale, stains and rust, after washing all surfaces are wiped and polished.

Getting rid of limescale

Lime contamination on surfaces is formed due to poor quality hard water. To prevent their occurrence, it is best to use a filter with reverse osmosis. It captures salt particles and other impurities that cause plaque.

But not everyone can afford such a device. Therefore, you have to use different means for cleaning. Pasty substances, as well as detergent compositions in the form of a cream or spray, will come to the aid of the housewives.

Showers are usually Complete with acrylic trays.

Which in their composition and production method are no different from conventional acrylic bathtubs.

In order to know the maximum full information About, how to wash the acrylic surfaces of the booths from limescale, yellow spots and rust- we recommend that you visit our.

Removal of lime stains difficult process and requires a lot of effort. However It is not recommended to use brushes with hard bristles and chlorine-containing liquids.. They can damage the surface. Therefore, it is better to use gels or sprays that contain mild acids. For example Acrylan and Cif cream. They will be discussed below.

The principle of application for all household chemicals is the same. The product is applied to lime stains, left for a while, and then wiped with a soft sponge and washed off with cold water. If as a result traces remain, the procedure is repeated again.

Particular attention should be paid to equipped. In addition to washing the surfaces of the booths, it is also necessary to clean the scale from the heating elements of the steam generator. This is done quite simply. Citric acid is poured into the tank, and the system turns on for maximum temperature. After 5 minutes of operation, you need to drain the water from the tank. Scale has been removed.

How can you clean glass from soap stains?

Some booths are completely made of glass, while others have only glass doors. In any case, soap streaks are the main enemy of housewives. After all, after almost every shower, stains remain. How to wash the plaque from the glass in the shower and how to clean the doors?

Special sprays are used to clean glass surfaces. They are applied to the glass, and then removed with a rubberized scraper, which allows you to remove the stains that are inevitable when using a rag.

Examples of such compositions are: Tytan, Mellerud and other specialized substances.

To prevent the appearance of a soap film, special water-repellent substances are used. They will be discussed below.

What chemistry is better to wash?

Bath and shower chemicals are chosen based on the type of dirt and the quality of the material from which the plumbing is made. For washing glass doors and walls, it is better not to use powder cleaners, they spoil the surface and leave scratches.

"Acrilan"- has a rather pungent odor, but has an antibacterial effect, suitable for acrylic and plastic pallets.

The tool is used to combat soap film, grease, rust, fungus and salt deposits. Leaves no streaks or scratches. Acrylan is applied to the fabric or directly to the surface, rubbed in and left for a while. Then rinse with water and wipe the booth dry.

"cif"- Available in the form of a soft cream without abrasive particles in the composition. Does not harm acrylic, enamel and metal coatings.

Removes lime, rust, soap scum and other persistent contaminants. Available as a spray and cream, and also has several options with different flavored fragrances.

"Cilli Bang"- the tool is presented in various forms: foam, liquid and spray. For each type of pollution, a separate composition is presented: “anti-grease”, “against lime”, “black mold” and “soap stains”.

The detergent is applied to the surface, left to more effectively interact with the pollution, and then washed off. Also suitable for cleaning glass doors, chrome faucets and handles.

Amway- a good detergent for cleaning surfaces from limescale. Its feature is an absolutely harmless composition. The material does not need to be rinsed off.

It is simply applied to problem areas and left for a long time. Can be used daily as an anti-pollution agent.

Spray anti-plaque— means for washing acrylic bathtubs and shower cabins. Gained recognition from users due to its ease of use. As the name implies, its main purpose is to clean surfaces from limescale.

Due to its acidic composition, it quickly decomposes contaminants. At the same time, it is quite gentle on the coating, which cannot be said about the skin of the hands. Therefore, it should only be used with rubber gloves.

How to clean folk remedies?

Along with chemical cleaning agents, folk recipes are used. They most often contain ingredients that can be found in every home. At the same time, methods of washing surfaces are no less effective than using household chemicals. How and how to wash cabins from limescale at home?

A shower stall is a place of high humidity, and sealant in the corners is an excellent environment for the development of fungus. It is the cause of many diseases, so it is very important to eliminate it in time.

In our special article, we will tell you and prevent its reappearance.

Remove dirt with ammonia

Ammonia does an excellent job of removing traces of soap suds and dirt. To prepare a solution 2-3 tbsp. l. ammonia is mixed with a liter of water. Spots of contamination are treated with a soft brush, then washed off with plenty of water and wiped dry with a microfiber cloth.

This method must be used very carefully. The composition should not be left for longer than 2-3 minutes. Otherwise, the surface may become unusable.

Hydrogen peroxide and soda

The combination of ingredients helps to get rid of limescale and formed in the corners of the booth.

To perform the procedure, baking soda is poured onto contaminated places and left for half an hour. The surface is cleaned with a sponge, and then hydrogen peroxide is sprayed onto the remaining powder and left to dry. The mixture is wiped with a dry cloth and the cabin is rinsed with water.

Lemon acid

Cleans the glass surfaces of the shower cabin. In 200 ml warm water dissolve 20 gr. powder.

The solution is sprayed with a spray gun on the doors and walls, then left for 15 minutes. Then wash off the mixture with water and wipe the glass dry.

To wash the pallet, folk remedies should be selected very carefully.. Various materials in contact with acid or alcohol can deteriorate, and stains and cracks form on the surface:

acrylic pallets cleaned using toothpaste or silver polish, vinegar with citric acid saves from rust and lime;
enamelled surface washed with gels and powders, since it is not capricious, while rust is removed with turpentine mixed with salt;
stainless steel- strong and durable, for cleaning use a mixture of chalk and soap in equal proportions;
chrome faucets wrapped in a napkin, previously moistened with vinegar or citric acid, to get rid of lime deposits.

Before use folk recipes it is recommended to test the product on a small area of the shower cabin in order to avoid damage to the surface layer.

Prevention and proper care

Every housewife knows that it is much easier to clean fresh dirt than an old limescale and soap film. Therefore, it is important to pay attention to prevention, daily care and cleaning of the shower. How to properly care for her?

Daily activities:

after taking a shower, it is recommended to wash off the remaining soap residue from all surfaces: first with hot and then with cold water;
if plain water does not help, use liquid dishwashing detergent;
to get rid of water drips that leave whitish stains, wipe dry the surfaces of the shower stall with a microfiber cloth.

Of course, carrying out such procedures after each shower takes a lot of free time. However, to maintain order, such actions are simply necessary. If you are short on time, you can follow a weekly schedule:

clean the booth with gels or creams, applying them to the surface and leaving for a while;
use sprays for washing glass doors, removing residues with a special window scraper;
rub chrome parts with creams;
wipe all surfaces dry.

After weekly cleaning, general cleaning may not be necessary, which will require less effort and time. At the same time, prevention methods will also free up time for rest and extend the life of household appliances:

regularly ventilate the bathroom, and also check the operation of the ventilation system;
use a high-quality sealant to prevent the formation of fungus;
in order to avoid the appearance of limescale and salt deposits, a filter for water purification is installed;
during cleaning, antibacterial agents are used to prevent the appearance of germs and mold;
leave the shower door open for ventilation.

Considering that the purchase of new equipment entails significant costs, preventive measures help save the family budget. At the same time, the absence of fungus and mold will positively affect the health of households.

Water repellent coatings

One more no less effective method prevention of pollution of glass doors is the use of water-repellent agents from drops. Dust along with water and soap suds, settling on the surface of the glass, leaves whitish stains and dirty spots.

Before and after hydrophobic coating

Household chemicals help clean glass doors, but do not protect against the emergence of new ones.

The water repellant is hydrophobic coating for glass in liquid form, which is also called "anti-drop". After its application, the water simply rolls over the glossy surface, leaving no traces. The hydrophobic coating protects not only from water, but also from dirt. The product contains three components that are mixed before application. It does not contain harmful solvents and is therefore safe to use.

The universal tool has many advantages:

easy to apply, no need to use special tools;
repels water, dirt and oil, and also protects from dust;
does not affect the structure of the glass and does not prevent the penetration of light;
suitable for glass, ceramics and faience;
one coating is enough for about one year, depending on the operating conditions of the glass surface.

The hydrophobic coating is applied in several stages:

For work, microfiber rags and a piece of non-woven fabric are prepared in advance.
The room temperature should not be below 10 o C.
The surface is washed and degreased.
Apply a water repellent with a piece of cloth.
After obtaining a matte film on the surface of the glass, it is polished using microfiber.

Most often, water-repellent products are sold complete with a cleaning agent. First, a washing base is applied, then a hydrophobic finish coat.

Video

Keeping plumbing fixtures clean is important because dirt, mold, and fungus have a negative impact on human health. When inhaled, microbes enter the body and cause various diseases. In addition to protecting health, cleaning is essential to prolong the life of your shower enclosure. At the same time, properly selected products will keep the surface in its original form.

Housewives often have to solve the problem of how to clean the shower from limescale without damaging the delicate coating of the tray or the appearance of the door.

Using showers instead of baths requires special attention. high humidity and temperature, water quality negatively affect the condition of surfaces and equipment. The complexity of the design and the use of different materials add to the difficulties in care. Such equipment can be made using:

plastic;
metal;
glass;
artificial or natural stone;
acrylic;
tiles.

Each of them requires special kind household chemicals, which will not only clean the surface, but will not spoil the appearance. To wash the shower quickly, without spending significant effort and saving cleaning compounds, it is advisable to follow a few simple rules during operation:

after each use, the shower must be rinsed with cold water, especially hard-to-reach places;
carry out weekly surface treatment with special cleaning gels;
for a couple of months, perform general cleaning, for which a soft brush or steam cleaner is used.

These simple yet effective steps will help neutralize the minerals and salts found in tap water that form limescale.

Cleaning products

Today, from a variety of different cleaning compounds, the hostess can choose factory-made powders, liquids or gels or improvised means.

Special funds

The list of finished products that can clean the surface of scale may include the following:

Tilex, a specialized composition with a light fragrance and antibacterial properties, effectively removes lime, safe for all types of surfaces;
Cif, an all-purpose cream paste with a thick consistency, has anti-abrasive properties that allow you to clean acrylic trays and plastics;
Sanelite, another option for household chemicals, safe for sensitive surfaces different types, the minus is an overly pungent smell;
Acrylan, a domestic preparation for scale, dirt and rust, a container with a spray bottle makes it possible to use economically;
Aron, a chemical composition designed to clean glass, 30 minutes after application, the inside should be washed with water, the outside should be wiped with a soft cloth;
Toilet duck, a popular liquid for toilet bowls, with increased water hardness, can be used to clean glass, sinks, tiles, not recommended for nickel-plated elements due to the high acid content.

The list of such compounds may be more extensive, the list contains only those that are most often recommended by experts.

Folk remedies

advantage folk remedies their greater availability with comparable efficiency is considered. You can remove lime using several well-known compounds:

a solution of citric acid, which is used to clean glasses, a tablespoon is dissolved in a glass of water and poured into a container with a spray bottle, after application, you need to wait 10 minutes, then rinse the solution with cold water;
toothpaste, unlike powder, it does not contain abrasive particles, does not allow scratches when processing nickel-plated, chrome-plated surfaces, after application it is rubbed with a sponge with a soft structure, if the contamination is old, rubbing is performed after a few minutes;
a combination of soda and peroxide, the area to be cleaned is covered first, left to absorb, then removed with a sponge, then peroxide is applied and allowed to dry;
vinegar, another effective remedy for lime deposits, to remove plaque, a solution is prepared in a 1: 1 ratio, after application, wait 30 minutes and wash off;
ammonia, for a more effective effect, is used in combination with vinegar and soda, for 2 liters of water there is half a glass of alcohol, a tablespoon of soda and vinegar;
whiteness, universal option, does not spoil any of the listed materials, copes well with any type of pollution, including lime deposits, the solution is applied to the area of pollution and held for up to 4 hours, then washed off with strong pressure cold water and wipe dry.

An unusual use in this area is the popular carbonated drink Coca-Cola. Its lovers should be aware that the effect of Cola is comparable to soda or vinegar. The drink is applied to the area with scale and washed off with a strong, cold stream after half an hour. Chemical composition allows you to completely remove the most persistent pollution.

Cleaning the shower from limescale

To clean surfaces without streaks and damage appearance, it is necessary to take into account the impact different types household chemicals for materials and its structural elements.

Glass cleaning

Typically, glass is used to make shower doors. This is the easiest structural element to maintain. It can be cleaned with any composition recommended for cleaning windows. From solutions prepared at home, you can use citric acid or ammonia. The procedure is simple:

washing liquid is applied with a spray gun;
remains on the treated area for several minutes;
if necessary, removed with a special scraper;
then wipe dry with a soft cloth.

This allows you to quickly remove lime deposits, soap residues, other types of dirt, without harming the treated surface.

Pallet cleaning

It is more difficult to clean the pallet due to the variety of materials that are used to make it.

Acrylic sinks are sensitive to abrasives, and scratches caused by them eventually become the cause of contamination. For this reason, mild agents such as white toothpaste, citric acid or juice are recommended for this material.
natural or fake diamond. The first option is less demanding for care, it retains its original color for a long time, and does not need strong household chemicals. The disadvantage of the second is the relatively rapid loss of the desired shade, which can be restored with a strong preparation for the care of the toilet.
Enamelled pallets are not recommended for cleaning with sulfuric or hydrochloric acid, alkali or formaldehyde. For enamel care, Pemolux or Comet are better suited. From self-prepared preparations, you can use a mixture of baking soda, citric acid and a small amount water.

After treatment, the sink must be thoroughly washed under strong pressure in order to completely remove the applied agent.

Tile cleaning

If the floor and walls of the cabin are tiled, it is possible to use any household chemicals for tiles. It is insensitive to strong chemicals and is relatively easy to clean. When processing, it is especially necessary to clean the joints between the tiles, where plaque most often accumulates.

Running case: how to clean old stubborn plaque

The remedy for old limescale for showers must be potent. These can be cleaning pastes and vinegar solutions. First, the area with plaque is treated with a paste, which is applied for half an hour. Then it is washed off, and the remnants of contaminants are removed with vinegar. Especially often the watering can of a tropical shower suffers from a stone. To clean it, it must be removed and placed in a solution of citric acid overnight, then brushed and rinsed.

Tips for proper shower care

Proper care is, first of all, timely cleaning. As a reminder, the following types of cleaning are recommended for showers:

regular, after each application;
periodic, once every two weeks;
general.

However, the latter may be superfluous if the two previous ones are carried out in a timely manner. The need for it arises when the equipment has not been used for a long time or with old pollution. In addition to cleaning, the measures taken to ventilate the cab are of great help in preventing deposits. There is nothing complicated here, moisture will dry faster if you leave the doors open after use.

Prevention

The only and surest way to prevent limescale will be regular and proper care. The less glass, walls and equipment interact with residual moisture, the less chance there is for limescale to form.

Shower cabin cleaning (video):

Often installed in apartments with a small bathroom area, which saves a significant part of the space. However, for the owners of such plumbing, despite all the amenities, the problem becomes relevant: how to wash the shower cabin? After all, over time, the original shine and purity are lost, soap stains, limescale, and sometimes even mold and rust appear. How to deal with all these troubles than to wash the shower? The answer to these questions depends on two factors: the nature of the contamination and the material of the surface on which it is located.

How to wash a shower cabin, the walls and doors of which are made of plastic? To clean these surfaces, products such as Tilex Fresh Shower, Frosh Essig Reiniger, Luxus Pure Bath, Mister Muscle, etc. are suitable. They are used according to the instructions.

Enamelled surfaces can be cleaned with powders, sprays or gels.
Contaminants on the faucet, handles and door hinges, coated with chrome, are removed using special tools (Delu, etc.).
When cleaning aluminum, plastic and acrylic surfaces, do not use solvents, abrasives or aggressive chemicals, as they may permanently damage them. It is necessary to use only means specially designed for these materials. To preserve the shine of the acrylic surface, wax polishing and rubbing with a cloth are used. Use only soft cloths or sponges that cannot scratch the surface.

Folk remedies

You can make your own limescale remover mixture. To do this, dissolve 20 g of baking soda and a sachet of citric acid in 200 ml of heated water, pour the mixture into a spray bottle and apply evenly on the cabin walls. After a few minutes, you need to rinse everything off and wipe dry. To remove stubborn lime stains, toothpaste, hot vinegar, or lemon juice are often used.

According to the advice of many housewives, you can deal with lime stains with a melamine sponge without detergents. To do this, wet a piece of sponge warm water and wipe the contaminated area.

How to clean a shower stall from rust stains?

Some manufacturers have special means for the care of your showers, including rust removal. Their advantage is that they are absolutely safe for various materials and cab coatings.

You can also use the well-known Cif or Cilit Bang cleaning fluids. Some improvised means will help to cope with rust: table vinegar, a solution of citric acid, a mixture of an aqueous solution of ammonia and peroxide in a ratio of 2 to 1. They are applied for a while to problem areas, and then washed off. If necessary, repeat the procedure.

P Helpful Hint: Do not leave metal objects in the cab, as they often cause rust due to oxidation due to moisture.

How to wash the shower cabin if mold is detected?

Black fungus usually forms along the walls of the device on silicone sealant. You can try to remove it using special chemicals (dr. Beckmann mold cleaner, Clorox Clean-Up bleach, Tilex Mildew mold remover, etc.). However, it is very difficult to completely remove the fungus and it will be most effective to replace the affected sealant. To prevent the formation of mold, you must follow these tips:

Thoroughly ventilate the bathroom and keep the cabin doors slightly ajar.
Use a sealant with a special anti-fungal coating.
For the purpose of prevention, periodically treat the sealant with special sprays for shower cabins.
If possible, install a floor heating system in the bathroom.

It is necessary to carefully process the walls of the shower to get rid of the fungus - Photo 07

General tips for shower care

The problem "How to wash the shower?" you will not be disturbed by the following recommendations:

After a shower, thoroughly rinse all interior surfaces of the cabin with water and then wipe dry with a soft cloth.
Traces of toothpaste and other hygiene products on the walls should be wiped off immediately, preventing them from drying out.
If the slightest plaque is found, it is easier to remove it immediately than to deal with old streaks and stains later.
Every two weeks, you need to wash all surfaces of the shower cabin using specially designed products.