What is a lamel. Blind slats - useful tips. Types of lat holders in orthopedic bases

02.04.2020

Lamella– it is of high quality, obtained by sawing or planing and glued together

The thickness ranges from 1 to 10 mm. The lamella obtained by sawing is of higher quality, because done with more advanced equipment. In the process of processing, a lot of material goes into sawdust, so the price of a sawn lamella is higher than that of a planed one.

Sawn lamella is obtained from dry boards in order to remove increased internal stress and improve the quality of the final product. Surface quality does not require additional processing before gluing.

In addition to pine and spruce, the lamella is made of oak, beech, ash, maple and many others. valuable breeds trees.

In accordance with GOST 2977-82 veneer has 2 quality grades - 1 and 2. It regulates the permissible presence of wood defects (knots, fungus, wormholes, sapwood, browning, fiber inclination) and mechanical damage.

Used in construction all-lamellar materials, such as shields for interior decoration premises.

They are made from high quality lamellas, by gluing them in one layer parallel to the fibers with waterproof glue.

The use of an all-lamella shield

facing material for walls and ceilings;
interior doors;
natural wood window sills;
furniture facades, panels, cabinet furniture and much more;
floor coverings - massive floor board;
elements for strengthening the rigidity of structures;
supporting elements of stairs - bowstring.

Traditional beds with a mesh base are practically not used today. They do not provide proper support for the spine, which leads to the development of diseases of the musculoskeletal system. Modern beds are equipped with an orthopedic base, the springing ability of which is the key to a comfortable sleep. The metal frame of the base is filled with slats for the bed, which can be of various widths and lengths. The plates have a curved shape, are elastic and durable.

Modern mattresses require maximum level ground making the sleeping person feel comfortable. The orthopedic bed frame with a rigid structure significantly extends the life of the mattress. On the sides, the design has small sides that fix the position of the mattress. The central part of the metal frame is filled with special curved boards, which are called lamellae or armor.

In the manufacture of bed slats, only high-quality, well-dried wood is used. In production, the array is sawn into layers, which, at a certain temperature, are impregnated with an adhesive composition and become slightly curved. An important characteristic of finished products is their elasticity, which is possible due to the uniform arrangement of wood fibers. Therefore, not any wood is used in production, but only beech, birch, ash, maple, poplar. For additional protection against moisture changes, the products are varnished.

The thickness of the plates varies in the range of 1-10 mm, the width is 25-120 mm. When laying them in the base, the distance between the products from each other can be 2-6 cm. In the designs for double beds, there are two rows of slats, separately for each sleeper.

More frequent laying ensures maximum reliability, which allows even a person with significant weight to use the bed. The maximum distance between the slats is chosen for small loads on the mattress. The standard for the base of a double bed 160x200 cm is a design with 30 crossbars. A smaller number may not provide the necessary strength. The minimum value is 22 lamellas for a double base.

The main functions of the rack base include:

Ensuring good ventilation of the mattress. A lot of air enters the gaps between the slats, thanks to which it is maintained optimum temperature at the point of contact between the body and the mattress;
To fix the plates, special holders are used, which ensure the noiselessness of the structure;
The flexibility and elasticity of the slats allows the mattress to take the most physiological position, which ensures good sleep and full recuperation;
Reduced and even distribution of the load on the mattress, which significantly extends its service life. The probability of reproduction of pathogenic microflora inside the mattress is reduced;
Products have a low cost, they do not greatly affect the final cost of the bed;
The high base makes it easy to clean. Garbage under the bed can be quickly swept out.

When choosing a bed or base for it, it is important to explore the possibility of buying accessories in case of breakage or damage to any parts. Bed accessories include not only slats, but also transformation mechanisms, lat holders, gas lifts for lifting mechanisms. If the orthopedic base was damaged during improper use, then it is possible to replace the damaged slats for the bed with your own hands. Breakage of slats often occurs when the air inside the room is too dry, when the wood dries out. In this case, it is recommended to clean the surface of the planks regularly with a damp cloth.

Characteristics of wood species

A beautiful bedroom with mirrors and a large comfortable bed is the dream of any person. After all, it is in a dream that we rest and restore strength. The quality of sleep largely depends on the bed. Maximum comfort and the durability of the bed base can be obtained by using a good mattress and supporting battens made of suitable wood. The most popular breeds from which wooden slats are made for the bed are:

Birch - has a white wood with a slight yellowish or reddish tint. An array aged 15-40 years is going into production. The high decorativeness of the texture is due to the confusing arrangement of the fibers with their high uniform density. Products made of birch are distinguished by good strength indicators, they are easily bent and subjected to other processing;
Beech - refers to expensive materials. array white color with a reddish or yellowish tint, annual layers are clearly visible. Wood is highly resistant to deformation, firmly holds fittings. Often used in manufacturing bent products due to natural elasticity. It tolerates changes in humidity and temperature. It has an average degree of resistance to decay. Beech slats are made for expensive beds;
Ash - has an elastic and durable wood. Products from it are difficult to split. The array has a light color, heart-shaped rays are absent. Qualitatively dried material practically does not deteriorate under the influence of external negative factors, it is easily processed. The material has a low thermal conductivity, which allows it to be used near heating appliances. The cost of solid wood products is high, they are used in exclusive products. An additional decoration can be a lamp above the bed or a carved headboard;
Poplar and linden - have similar characteristics. Their wood has a low cost, has medium strength, softness. The dried array is easily processed, stained. Products from poplar and linden impregnate protective equipment, which make it possible to operate in conditions of high humidity;
Maple - belongs to the noble varieties, is actively used in furniture production. From it you can make a frame, headboard, slatted base. The strength and density of the material depends on the variety of maple. The elasticity and viscosity of wood allows you to process products different ways, fasteners and accessories are held in it securely due to the significant hardness of the wood.

The optimal ratio "price-quality" have slats made of birch raw materials. Solid beech and ash slats significantly increase the final cost of the bed.

The production of lamellas and frame bases is carried out at furniture enterprises. But you can also make armor at home using suitable boards. Before making lamellas from boards, they must be pre-treated with an adhesive composition. Self-tapping screws, a dense edge tape or special fasteners - lato-holders are used as fasteners. You can install the lamellas with your own hands in the grooves that are formed when special wooden bars are fixed to the frame.

An alternative to wooden rack bases are metal lamellas. Unlike wood armor, they do not change their rigidity during the entire service life, but they have significant weight. Metal slats practically do not bend under the mattress, which reduces its orthopedic properties. But when using a welded metal base, there will be no problem: the lamellas creak, what to do. From this problem, the owners will be insured.

When choosing steel with an anti-corrosion coating, the base can be operated in conditions of any humidity and temperature. Metal crossbars will require less than wooden ones. For a single bed, 8-10 pieces will be enough, while wood products will need 14-15. Cast welded bases do not require an additional central guide. Metal armor is rarely used in beds with a lifting mechanism, as they have significant weight.

What are the holders

All armor can be divided into 2 types depending on their width:

Wide slats (50-70 mm) are suitable for latex springless mattresses or products with box springs. They are installed at a distance of 4-6 cm from each other. It is convenient to use wide lamellas on the tape, then they can be brought closer or removed when changing the length of the base frame;
Narrow bars (30-40 mm) are used for mattresses with independent springs, the density of which is high. A lattice with frequent narrow slats can be used for cribs, folding beds or transforming beds. The distance of narrow strips from each other should not exceed their width.

Modern orthopedic bases are rarely equipped with a rigid body mount lat. Preference is given to special fittings - lato-holders. Special tips are put on each rail. Then the slats are inserted into special slots on the frame. The flexibility of the rails allows them to be slightly bent during fixation.

Such mounts for lamellas are made from the following materials:

Polypropylene - the material has high strength, elasticity, lasts a long time;
Plastic - the cheapest products with a short service life, low strength;
Rubber - it is recommended to use holders made of this material when it creaks wooden bed. Rubber elements prevent the appearance of unpleasant sounds when the elements rub against each other. They have a high price.

Special lat holders allow you to adjust the rigidity of the base. This is achieved by moving the cursors along the bar. If a person has serious problems with the spine, then blocks with double or triple armor are used. Such bases improve the orthopedic properties of mattresses, increase rigidity in the lumbar or cervical area.

The holders are fixed to the battens with furniture brackets, wood screws, rivets, or using built-in plugs that are installed directly on the frame. When a wide model range orthopedic bases, the offer of latto-holders has expanded, which differ in the type of fastening:

overhead;
For fixing on round holders;
Shooting;
For lateral fixation 53B or 63B;
Internal;
Thrust 53UP or 63UP;
Double rubber LPDA-2-38 or LK-38.

Clamps are purchased for a complete set of slats or individually. If you need to repair the beds, then the broken armor and holders are easily replaced with new ones. Installation of new elements is simple and fast, no skills or expensive equipment are required to change. If you previously used a bed without slats, then you can replace the solid base with an orthopedic slatted one.

Dimensions and parameters

All armor can be divided according to several parameters: width, thickness and length. The standard thickness of products is 8 mm. If necessary, you can choose thicker plates that can withstand people of considerable weight. Quality armor has the same radius along its entire length, which allows you to shorten long slats or cut them into several pieces. Orthopedic properties of products do not deteriorate during shortening.

Depends on the width of the plates permissible load on the grounds. For light cribs, 38 mm wide plates are used. Designs for adults include the use of plates with a width of 53 mm or more.

The most popular lat sizes are:

Small 38x8x890 mm, 50x8x990 mm, 53x8x990 mm;
Medium 63x8x910 mm;
Large 63x12x1320 mm;
Wide 83x8x1320 mm.

The optimal bending radius of products is R 4000-8000 mm, it is used by all major manufacturers. Finished goods polished and coated with a special adhesive composition with heat treatment. In the manufacture of bases for sofas with a "French folding bed" transformation mechanism, large armor is used, which makes the sleeping place comfortable for sleeping.

August 2, 2018
Specialization: master in construction drywall constructions, finishing work and installation floor coverings. Installation of door and window blocks, facade finishing, installation of electrics, plumbing and heating - I can give detailed advice on all types of work.

The base of the bed is an important part of the design, on which the quality of sleep largely depends. And if solid flooring or spring options were previously used, then today a simpler and more effective solution- structures made of wooden lamellas. This option creates optimal conditions for human recreation and at the same time it is inexpensive. We will analyze all the features of the products and tell you how to put them correctly.

What are products and why are they needed?

First, let's figure out what a lamella is. This is a special wooden plate, curved to one side in order to create an elastic base during installation. Most often, the elements consist of several layers of wood that are glued together, this provides the best spring properties and makes the lamellas much more resistant to deformation and damage.

In the manufacture of different types of wood are used: beech, ash, maple, linden, birch. In principle, all options differ in quality if they are produced according to technology.

The most popular option is birch products, they are distinguished by affordable cost and good performance.

Now let's figure out why we need slatted bed bases:

This design increases the anatomical effect of the mattress, improving its properties. In fact, this is the ideal solution for orthopedic mattresses, even their manufacturers recommend using beds with just such options. They are best suited for heavy mattresses, which are used in modern conditions.
The slats reduce the load on the bed frame and on the mattress. Due to the spring properties and a separate frame, which is always used for the rails, they provide a longer service life of the structures due to a more competent weight distribution.
The use of slats can significantly increase the life of the mattress. This is achieved not only due to the competent distribution of weight, but also due to the fact that the slats are located with gaps and the lower part of the mattress is well ventilated, which is very important. If on solid bases the lower part of the mattresses is often covered with condensate, which is fraught with the formation of mold, then this problem is absent in the slatted structure.

Due to the curved shape, the base has a springy effect. In addition, due to the design features, the bed base does not creak or make other extraneous sounds even after a long service life.
If you use special holders made of latex, then the base will adapt to your anatomy. The mount is made movable, which is very important for optimal load distribution and ensuring a comfortable position for the spine.

Aspects of choice

Now let's figure out how to purchase quality products and what should be given priority.

In what form are they sold

In general, lamellas can be included in the delivery of a sofa or bed, or they can be sold individually, which is very convenient.

It is important to remember that if at least one element is broken at the base, then sleeping on it is not recommended. This is due to the incorrect distribution of the load on the base, and the risk of deformation of other panels, and the incorrect weight distribution of the mattress, which reduces its orthopedic effect.

You can purchase the following options:

Lamella set. Most often, this solution is suitable for those who change all the elements of the base, or for those who assemble the orthopedic base on their own. To buy a set, you need to know the dimensions of the bed or the dimensions of the frames in which they are placed, because in the double versions two designs are used.
Kits on tape. This option was widely used in models produced a few years ago, today such designs are not used, as there are better solutions. If you have an option on the tape, then you can buy a similar set and quickly replace the base, this process takes a few minutes.

Armor can be bought by the piece. Most often they are sold in furniture stores or outlets specializing in furniture fittings. If you are looking for a separate element, then it is important to know the dimensions of the slats used by you - their length, width and thickness, otherwise it will be difficult to find the right solution.

In addition to the rails themselves, special fasteners may also be needed. There are a lot of options, so a specific solution is selected individually for a particular design.

Which is better

Let's figure out what aspects you need to remember when choosing lamellas:

Illustration	Description
	Wide slats. They are used as a base for mattresses without springs and for variants with Bonnel dependent spring blocks. They can be up to 1200 mm long and are most often used on single and half-sleeping structures, although they are also found on double beds. This option is characterized by high strength, the elements resist loads well and practically do not break during operation.
	Narrow slats. Best suited for mattresses with independent box springs. They can be located both through the same gap, and in pairs, if flexible rubber fasteners on the frame are used. The option is elastic and provides high comfort of rest.
	For a single bed you need 13-16 wide slats. If narrow elements are used, then there may be twice as many of them. It is important to arrange the elements at the same distance so that the base is the same in its characteristics over the entire area.
	In double designs, the lamellas are placed in two rows.. That is, they usually need twice as many as in single options. As for the quantity, it all depends on the width of the lamellas, the length of the base and the required rigidity of the structure.
	The standard parameters of the elements are as follows: Thickness is 8-10mm, it is optimal solution, take products thinner or thicker is not worth it. Width from 4 to 7 cm, it all depends on the type of mattress used. The length varies depending on the width of the bed, but usually one lamella is made no more than a meter. Another parameter is the distance between the battens, it should be no more than the width of the rails used. Usually this figure is from 3 to 7 cm. The gaps can be narrower than the width of the rails.
	It is important to choose high-quality holders for latoflex(this is also the name of the products we are considering): Plastic is the cheapest, but also the lowest quality solution, which can crack with considerable effort. Polypropylene is a more ductile material that resists damage better and lasts longer than plastic. Rubber is the most elastic option and allows the sipes to play with the load. This type is shown in the photo on the left.

Aspects of the right choice

Illustration	Description
	When choosing beds, always count the number of slats in a row.. The optimal number for a bed 200 cm long is from 20 or more. Experts advise choosing solutions with the maximum number of elements, they are more elastic and provide reliable support for any type of mattress. If the length of the bed is different, then the number of latoflexes will vary.
	Production material. Another important aspect that directly affects the durability of the structure: Birch is the most common and popular solution, characterized by low cost and good performance. Beech and other hardwoods are a more reliable solution, which is noticeably more expensive. But if quality is important to you, then choose this solution.
	There are systems with different levels of lamella stiffness in different areas. This solution is perfect for those who have back problems and those who value comfort and care about their health. To adjust the rigidity of individual sections of the structure, special jumpers are used, shown in the photo.

How to make a base with your own hands

Let's figure out how to insert a rack base to replace the old solid flooring, everything is quite simple if you understand the issue:

Illustration	Description
	Lamella holders. You need two of these elements per bar. Plus, it is advisable to purchase a few more pieces in reserve, in the process of work, sometimes individual holders deteriorate.
	slats. Their size should match the holders, and the number should be selected depending on the size of the bed and the distance between the armor. We recommend choosing a clearance of 4 cm, this will give a medium stiffness.
	To work, you will need such a set of tools: Electric jigsaw or hand saw. It is more convenient to cut lamellas with a power tool. Construction square, tape measure and marking pencil. Screwdriver with a nozzle for self-tapping screws.
	The bed is vacated first. It is necessary to remove the bed and remove the mattress to open access to the base. In our case, these are chipboard sheets screwed with self-tapping screws. The fasteners must be unscrewed, and the sheets removed and removed.
	There is a bar in the middle. It's wide enough so there's no need to redo anything - we'll be using the old frame with a few tweaks.
	On the side, the load-bearing elements are too narrow to reinforce the frame holder, a rail is screwed to the old bar. The result was a protrusion of 5 cm.
	The slats are cut to the desired length with a jigsaw. Then holders are put on the end and the elements are laid out on the surface. To control the same gap between the lamellas, a building square is used, its width is just 4 cm.
	Fastening is made through the protrusion at the bottom. For each holder, we recommend using two self-tapping screws to ensure reliability. Can be fastened with elements of 25 mm in length.
	Assembly is carried out in the same way until the very end.. When the base is ready, you can lay the mattress and enjoy a comfortable rest.

If you need to repair part of the base and replace one or more damaged lamellas, then you just need to unscrew the fasteners on the required elements and replace them. Everything is simple and fast.

Grid or solid bottom

If you are still in doubt, then let's look at the advantages of lamellas:

The slats provide ventilation from the bottom of the mattress, solid flooring does not.
The grate has springy properties, and chipboard or plywood lies rigidly.
Orthopedic properties of the mattress are best manifested when using lat.
The solid base sags and creaks over time, the grate does not have these disadvantages.
Rack systems are much lighter, which is also important.

Conclusion

Now you are familiar with all the features of the slats used in the bases for beds and sofas, and you can install them yourself, the video will help you understand the workflow even better and clearly show important points work. If there are any questions - write them in the comments.

August 2, 2018

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

Lamels - glued laminated timber with an arched profile and a slightly curved shape. These materials are used for the assembly and manufacture of furniture, blinds, doors, less often for building a house. Glued laminated timber allows you to build a house in a short time with the least financial investment. It gives a little shrinkage. But, unlike profiled timber or round timber (logs), it contains glue, so it cannot be considered 100% environmentally friendly and natural.

Manufacturing of lamellas

For the production of these products, wood is sawn into boards and dried to a moisture content of 10-12%. Then the future lamellas are planed and knots and areas with defects are removed from the surface. After that, the resulting boards are glued together so that the fibers are directed in different directions. This increases the strength and reliability of products.

Glued boards are once again processed and profiled, ridges and grooves are made. Such a fastening system will further simplify and speed up the installation of the log house. Lamellas are quite strong and durable, easy to install and process. They have an attractive appearance and low weight, which reduces the pressure and load of the structure on the soil. Therefore, during construction, installation of a deep and expensive foundation will not be required.

Shrinkage of lamellas is 1-2%. By the way, during construction in winter, shrinkage takes no more than six months, in summer - twice as much. However, the use of toxic glue and high-frequency formaldehyde gluing in the production violates the environmental friendliness of natural wood.

In addition, the lamellas are characterized by low permeability, which prevents the wood from “breathing”. As a result, the air exchange in the room is disturbed, the tree may begin to rot and darken, become moldy. Lamellas require careful and competent installation, otherwise the products will not lie tightly to each other, which will lead to heat loss, a decrease in sound and heat insulation properties.

Construction of a wooden house

If you want to get high-quality and reliable, 100% natural, environmentally friendly and safe Vacation home, experts advise choosing for construction not glued, but profiled timber or a log. These materials are more expensive and shrink more, but they are stronger, more durable and safer. And lamellas are better to choose for the manufacture of furniture and interior design.

The company "MariSrub" independently harvests wood, manufactures and processes lumber. This guarantees the quality of the products. Each beam or log is antiseptic and coated with flame retardants at the stage of manufacture, installation and assembly, and finishing. This treatment will protect negative impact moisture, ultraviolet and insects, open flame and spread of fire. As a result, the wood does not rot and does not fade, is not covered with mold, and retains for a long time physical properties and original appearance.

Construction wooden house from the manufacturer allows you to get a high-quality and reliable result with a guarantee, and also provides an opportunity to save on paying for the work of intermediaries. We offer low as well as full turnkey construction.

Masters of the company "MariSrub" produce and assemble a log house reliably and quickly. We carry out waterproofing, insulation and caulking, construction of foundations and roofs, installation of doors and windows, finishing inside and outside the house. We guarantee high-quality and timely construction!

A lot has been written about the benefits of an orthopedic base for spinal health, so the demand for such mattresses is unusually high. But when you come to the store for the “right” mattress, or choose a sofa with a quality bed, you could hear from consultants that there are special devices - slats that enhance the orthopedic effect of the mattress. What are lamellas? How do they work? What furniture are installed on, and is it possible to make them yourself? In this article we will talk in detail about the lamellas, and we will reveal the questions posed above.

What are lamellas and why are they needed

slats- These are thin, moderately strong plates that are part of the frame of bedroom furniture, and are used as the base for the mattress. They are made from veneer, i.e. thin sheets of wood glued together, which gives the plate flexibility, and the mattress lying on it - an enhanced orthopedic effect.

Classic, “correct” lamellas are made of beech, which is distinguished by hard, dense wood. Veneering gives it flexibility, and if the wood is of high quality, then deflections will not affect the plate in any way, it will withstand high loads, easily return to its original position, and will not break. But to reduce the cost of production, lamellas are often made from other, less durable wood species, and covered with a single layer of beech veneer on top. Naturally, the service life of such plates is significantly reduced, and under increased loads, they can generally crack or break. Beech lamellas are able to withstand up to 40 kg. weight per plate, which characterizes them as an ideal material for this type of base, because each plate is fixed separately, at a distance, and copes with its part of the load on its own.

The lamella-based frame creates good ventilation for the sleeping place, moisture evaporates quickly, the mattress does not have a heavy spirit. Another design makes it easier to clean and care for furniture, perfect for people with allergies, because it does not contain additional dust collectors.

Types of slats

These products have several varieties, and the range continues to expand, thanks to new technologies, design methods. Types of lamellas are ranked by:

size;
material of manufacture;
rigidity;
fastening methods.

Regarding dimensions, there are two standard plate widths: 68 mm. and 53 mm., with the same thickness of 8 mm., individual length, depending on the size of the bed. In the furniture industry, wide slats are more popular, because they have a more aesthetic appearance, are considered the European standard, and less of them are needed to form the base. Narrow slats, due to the larger number, provide a better spring effect, so they can be used in tandem with any mattress. There is no fundamental difference in the width of the plates and the quality of sleep, therefore, the choice of slats is best left to the master, who will evaluate the design of a particular model and select the ideal slats for it.

Plates for the frame are made from alder, birch, beech, sometimes pine veneer. As we have already stated, the best option beech is considered. Alder and birch belong to the economy segment, since the service life of such rails is lower due to the low density of the raw material. Pine can be the basis for a single bed, or children's furniture, because its wood is soft and will burst under heavy loads.

Lamellas also differ in the degree of rigidity. There are spring, more flexible, recommended for adults to unload the spine, and straight plates that do not provide for deflection. They form a fairly rigid, even surface, ideal for a child's spine.

The method of fastening the rails depends on the material of the frame. It can be metal or wood. The first one is more durable, rarely creaks, and is able to withstand childish pranks. The second requires careful handling, the service life and degree of wear depends on the raw materials from which the bearing parts are made. The plates can be inserted directly into the frame, or special lamella holders attached to the frame. They are produced in the form of staples, rivets, and differ in price and raw materials.

Which sofa is better: spring or lamella-based

With the dilemma of choosing a new upholstered furniture faced by many people. The more information is known, the more difficult it is to decide, especially if we are talking about the filler. Each material has its own advantages, disadvantages, giving the product originality. Today we want to compare a bed with a spring block, with the same one based on lamellas, and decide which sofa is better.

So, the springs in the sofa allow:

do not use additional “sofa” mattresses, since the spring block inside does an excellent job of supporting;
withstand additional loads;
create a light effect of depreciation, to unload the spine.

The slats used in the design of the sofa provide:

tangible orthopedic effect;
long service life of furniture;
less dust accumulation in the bed;
enhanced air exchange.

If the main purpose of the future sofa is to use it for sleeping, then it is better to choose a model with lamellas, since it is more practical in terms of care, it accumulates much less dust than its spring counterpart. Also, due to good air circulation, it will protect the filler from the development of pathogenic microflora. If the sofa is purchased for gatherings in the living room, then there will be no fundamental difference between springs and lamellas, both types of filling can provide a comfortable location.

The distance between the slats and the choice of mattress

slats- a delicate matter, in the literal and figurative sense of the phrase. In order for them to serve for a long time, it is necessary to take into account all the nuances. For example, the number of rails in the bed, their width, distance from each other. These data will help you choose the best mattress for the purchased bed, and enjoy your daily, healthy sleep.

Each manufacturer, at its discretion, outlines the distance between the plates, guided by a single rule: the gap between the lamellas should not exceed the width of one bar. So, if rails with a width of 68 mm are installed on the frame, then the distance between them can be 65 mm, 50 mm, 25 mm. If the strips are narrow (53 mm.), Permissible gaps start from 50 mm. How does this information help when choosing a mattress? According to existing standards, an ideal surface is ensured while maintaining the pattern: the higher the density of the springs in the mattress, the smaller the gaps between the slats. So if you want to sleep on the block independent springs, or on a latex mattress, you need to choose a base with a minimum distance between the slats. By giving preference to classic dependent springs, you can use a base with fewer rails.

Is it possible to make slats for the bed yourself

You already know what lamellas are, what they are for, and now I want to move on to a more burning question: how to make them with your own hands, install them on the bed? Of course, experienced masters answer. It is possible not only to replace the cracked rail, but to equip old furniture correct, orthopedic base. To do this, you can take beech, birch plywood, 8 mm thick, and cut it yourself into planks of standard width. Also a popular material from which “homemade” lamellas are made are wooden mounting rails, sold in every hardware store. Their craftsmen cut them in length, width, bringing them to close to the factory parameters. However, it should be remembered that such work cannot be carried out without special tools, therefore it is permissible to purchase ready-made lamellas of the required length and install them yourself. Fortunately, the range of furniture centers allows you to buy and replace any item by the piece.

Summing up, we can confidently say that the lamellas are a very comfortable, practical material, easily self-repair, and providing healthy sleep to its owner. There is a large selection of furniture based on lamellas, and it will definitely not leave you indifferent.