Adapter for a car pump for inflating a boat. How to choose a pump for an inflatable boat Is it possible to inflate a boat with a car compressor

08.05.2020

A boat pump is a very useful device that greatly facilitates the process of inflating a product. In some cases, people prefer general purpose models or pumps for cars. But there are a number of advantages to using an apparatus assembled specifically for a boat.

Specialized equipment always has a number of advantages over conventional equipment, whether it is an electric pump for a boat or something else. The main criterion is device performance. The compressor power is calculated taking into account the parameter of the rubber product, so there should be no problems during operation.

Many people wonder why to buy a specialized device if you can pump up a PVC boat with a car compressor with your own hands? Of course, you can pump up the boat, but there will be a number of difficulties. The car pump is not designed to pump such volumes of air, so it will take a very long time to completely fill the PVC product with air. Not everyone is ready to spend so much time waiting, sitting on the river bank. In addition, in most cases, an adapter may be required to inflate the boat with a car compressor.

Types of pumps

PVC boat pumps fall into two categories. Models capable of creating low pressure, as well as medium and high.

Low pressure type provides a relatively fast pumping of air, but this pressure is held for a relatively short time, and it is not enough to bring the boat into operational condition. Most often, for pumping, you need to resort to using a foot pump.
Medium and high pressure. Models that pump medium and high pressure are able to pump up the boat as quickly as possible. They do not require additional paging devices. Another significant advantage is the complete autonomy of the process without human intervention. It is enough to connect the device to the socket and turn on the button.

The pumps are also divided into manual, foot and electric. The latter are able to provide high pressure in the shortest possible time. Basically, pumps are selected depending on the size of the boat. Each manufacturer of PVC products equips its model with the simplest frog-type pump. But to pump up a boat with such an apparatus, you will have to make a lot of effort. That is why many fishermen prefer to initially purchase a more productive model.

Foot and hand pumps

Everything is relatively simple here. If the method of inflating by foot is the most preferable, then it remains to choose a model, suitable for the characteristics of the existing boat.

For PVC boats no more than three meters, having a chamber volume of 5 liters and a pressure of 300 mbar.
For boats from three to four meters long, chamber volume up to 6.5 liters and pressure up to 400 mbar.
For any PVC boat, whose length is from four meters, the allowable volume is 6.5 liters and the pressure is 500 mbar.

It is customary to distinguish between hand pumps for inflatable boats only according to two main parameters.

For boats of small length (up to 4 meters), double-acting, having a cylinder volume of 1.5 liters. The pressure is 500 mbar and the length of the cylinder is 410 mm.
For all other boats over 4 meters long, double acting and 2.5 liter capacity. The pressure in this case is 600 mbar, the cylinder has a length of 510 mm.

Hand pump

The convenience of using hand and foot pumps for inflating a boat is rather doubtful, but they do not require power supply, and they can be used in any, even the most remote places. In addition, they are light and compact.

Electric pumps

An electric boat pump is the most convenient and functional solution. It only needs a power supply to use it. There may be two options here.

Also, electric pumps are divided according to the principle of operation into centrifugal and piston pumps.. The first of them provide a pressure level of up to 200 mbar, and models with a piston principle of operation - up to 800 mbar.

There are a few simple rules, adhering to which, it will be possible to purchase a model that fits exactly to the existing PVC boat.

Models must be selected the highest degree of protection of the body. This is very important if the device will be used in extreme conditions.
When choosing a model, you must be guided by reasonable principles; you should not choose something that is obviously cheaper or more expensive. Often, the question does not depend on the price, but on the parameters of the available PVC product. In the case of an electric pump, it must be taken into account that its performance strictly corresponds to the parameters of the boat.
You should not buy a "noname" model, which does not even have the name of the manufacturer, but only the index. The best thing give preference to well-known brands well established in the market.
It is important that diaphragm pump dominated metal elements This will greatly extend its service life.
A significant advantage will be the presence of the pump pressure sensor and regulator.

Overview of the best boat pump models

Here are 5 models that have earned positive feedback from many fishing enthusiasts. The mini-rating includes both manual and electric models (networked and battery-powered) - everyone can choose a product to their liking.

The fifth line is hand pump from the famous manufacturer "Intex". This model is designed primarily for those who prefer to travel light. It is simple and convenient to work with such a pump, and most importantly, after a long pumping, the palms do not hurt at all. The case is made in black, without the possibility of choice. Production material strong and durable plastic. For manual pumps, the last point is not a minus, because. they lack an automated supercharger. On the contrary, the plastic case is much lighter and, therefore, easier to transport.

The device perfectly copes with inflating any PVC products. Comes with set of various nipples and nozzles for connecting to various objects. The cost of the device is 528 rubles. In addition to a set of nozzles, a durable corrugated hose is attached to the pump.

inexpensive;
easy to use;
reliable;
takes up little space;
verified manufacturer;
various nozzles included;
stylish look.

low performance;
you can’t pump a large boat without a supercharger low pressure;
short corrugated hose included.

4. Bestway

When looking for which pump to buy, you should pay attention to the model from Bestway. This is a wonderful device from a Chinese brand. The company has been on the market for a long time and has positive feedback about its products. The device is offered in large retail chains at a price of 1299 rubles. Highly profitable price for an electric pump, if you take into account the models of competitors. Distinctive feature this instrument is work from a network of 220 V. You just need to plug it into a power outlet and wait for the result. The pump will cope with any PVC product: a boat, a pool, a mattress. The device is small and easy to transport.

Electric pump Bestway 62097

Important! The package contains only the unit itself and the hose. A set of adapters is offered to be purchased separately.

Great solution for those who have big boat requiring a productive compressor at hand. The weight of the model is only 441 grams. The pump tested by time and users.

high performance;
long warranty period;
famous brand;
reliability;
strong body;
small size;
convenient to transport;
easy.

works only from the network;
no adapters included;
noisy.

3. STERMAY

The top three is opened by the well-known manufacturer Shtermey. This PVC boat pump is widely popular with fishermen. First of all, the model is purchased for good combination cost and performance. You can buy a model for only 4940 rubles. The main advantage of this unit is battery operation. In the kit you can find special tweezers (crocodiles), with which the device is connected to the battery. This is very convenient in conditions where there is nowhere to connect to a power outlet.

STERMAY pump high pressure electric with "crocodiles", 12 V

The device is capable of pumping up to 230 liters per minute. The maximum working pressure is 1.37 bar. Time of continuous work no more than 15 minutes.

Advice! For the indicated period, the device is able to land the battery, so you should take care of a replacement.

Device made of plastic and operates from a voltage of 12 V. The number of stages of injection intensity is two. A very good device that can be used away from civilization. Indispensable for anyone who enjoys fishing on the water.

high performance;
battery operation;
optimal pressure in the system;
two stages of injection;
well-known manufacturer
15 minutes of continuous work;
the voltage is 12 V.

no pressure sensor;
plastic case;
strong vibration and hum.

2.GP-80

One of the most popular boat pumps today. The GP-80 is rarely seen on sale just because it is bought so often. The average cost is 6362 rubles. This is a battery supercharger, which comes with special "crocodiles" for connecting to the "plus" and "minus" of the battery. Also supplied with a pump durable corrugated hose and as many as eight nozzles for different kind boat nipple. The weight of the device is 3 kg. The model is made of impact-resistant plastic in a bright yellow. A feature of the device, like the model above, is battery operation. This makes it possible to operate outdoors.

reliability;
high performance;
strong body;
small dimensions;
battery operation;
operating voltage 12 V;
light weight.

quickly discharges the battery;
loud noise during operation;
missing sensor.

The best pump of today's top 5, the Bravo bp12 model, is the best choice in the middle price category. The cost of the device is only 4195 rubles. It is a robust and reliable unit capable of create pressure up to 1000 mbar. This indicator is a decisive criterion, because for most modern boats, this pressure is enough in excess. Most importantly, the device is equipped air extraction function. The weight of the device is only 1.7 kg, it is very convenient to take it with you to the boat. Thanks to the "crocodiles" included in the kit, the pump can be powered by almost any 12 V battery. The maximum current consumption is 20A, which is quite a standard figure for most electric pumps.

pumps up the boat in 12-15 minutes;
comes with an air hose;
detailed instruction manual;
light weight;
convenient dimensions;
very productive;
Italian production.

the battery runs out quickly;
hum at work;
device cost.

Conclusion

Choosing a pump for a PVC boat can be simple, but for this you need to take into account the parameters and criteria that were described above. To purchase the necessary model, you should be well aware of the characteristics of the boat itself, as well as familiarize yourself with the nuances of operating the selected type of pump.

Purchasing an inflatable boat requires purchasing a high performance pump. This is due to the fact that it takes a lot of time to inflate it with a frog-type pump, which is included with the boat. As a rule, preference is given to an electric pump, which is powered by a car battery. Despite this, not every PVC boat owner is ready to buy an expensive item.

The choice of pump depends on various factors that can influence the selection process. First you need to decide on the purpose of the pump and its price. Before buying, it will not be superfluous to pay attention to the following characteristics of the model:

The admissibility of work from the accumulator or lighter of the car. Usually, centrifugal pumps work from the on-board network of the car 12V. Designs with higher performance are connected to both the battery and the cigarette lighter. At the same time, there are models that also work from the 220V network.
Boats with a length of up to 4 m require an electric pump with a capacity of 300-400 liters per minute. Boats over 4 meters in length require a pump with a capacity of up to 1000 liters per minute. The pump must provide a force of 300-400 mbar so that you do not have to pump up the watercraft hand pump, like "frog".
Availability check valve for pumping air out of cylinders. This function makes it possible to perfectly evacuate the air from the boat, which makes it possible to fold the boat more tightly for transportation.
The presence of a built-in pressure sensor, which allows the pump to operate offline. This eliminates the need for air pressure control.
The presence of a built-in battery.

5 best electric pumps for pvc boats

Differs in the presence of a built-in power regulator, which expands it functionality. With the help of the pump, it is possible to pump up not only boats, but also other structures. In eight minutes, he can pump up a four-meter boat to the optimum pressure.

The user can independently select the operating pressure. After inflating the structure, the device itself is able to turn off, which will save, for example, a boat from excessive pressure. With its help, it is possible not only to pump up, but also to pump out air. The pump comes with connectors for various designs valves, which allows you to inflate various designs.

Device Specifications:

Supply voltage - 12 V.
Current consumption - up to 9 A.
Productivity - 150 l / min.
Working pressure - 300 mbar.
Construction weight - 1100g.

It is designed to obtain optimal pressure in air tanks.

The package includes:

Hose for connection to the pump.
Electrical cable with crocodile terminals.
A set of adapters for various valve designs.
The fitting that connects the air hose to the compressor.
Built-in pressure regulator.
Bag for transportation with the presence of the required number of compartments.

To download the design you need:

Connect the air hose to the compressor and the object to be inflated.
Connect the electric pump to the battery using alligator clips, observing the polarity.
Turn on the device by pressing the "ON" button.
Set the desired pressure on the sensor.
After completing all the preparatory operations, the "START" button is pressed.

To pump air out of the boat, you should switch the air supply hose to another pipe marked "IN". All subsequent actions are the same as when pumping up the boat. The case of the device has no protection against moisture ingress, therefore, being near a reservoir, you need to be careful enough so that moisture does not get on the device.

Technical characteristics of the electric pump:

The maximum generated pressure is 250 mbar.
Productivity - 1000 l.
Current consumption - 45-60 A.
Supply voltage - 12 V.
Weight - 3.5 kg.

The pump model is designed for inflating large PVC inflatable boats.

The package includes:

Air tube
Cable with alligator clips
Valve adapter set
Built-in pressure indicator
Keys for turning the pump on and off.
Bag for transportation.

The design consists of two separate blocks. The operation of the device begins with the launch of the first module. When the first module reaches the maximum working pressure, the second, more powerful module is switched on. When the second unit is turned on, the pump operation becomes noisier.

If the device does not switch, then you should pay attention to the completeness of the battery charge and, if necessary, charge it. Although other reasons are possible.

The boat is inflated as a result of the following steps:

Connect the air connection accordingly.
Connect the pump to the power supply.
Connect the nozzle to the boat using the appropriate adapter.
The pressure regulator is set to the desired position, after which the "ON" button is pressed.

To evacuate the boat:

It is necessary to switch the air hose to the air evacuation pipe.
Pumping is not carried out autonomously, so you will have to control this process.

Main specifications:

The maximum working pressure is 800 mbar.
Supply voltage - 12 V.
Consumption current - 15-20 A.
The device weighs 1.9 kg.

This pump is suitable for inflating boats with cylinders operating pressure not exceeding 300 mbar. This is always noted in the boat's passport. The BRAVO BST 12 electric pump is designed on the basis of a two-stage compressor, which allows you to inflate other inflatable structures.

The set of the device includes:

An electrical cable up to 3 meters long, which can be connected both to the battery and to the cigarette lighter, as well as a set of connectors for various valve designs.
Built-in pressure regulator.
Air hose.

Device characteristic:

Supply voltage - 12 V.
Consumption current - 15 A.
The maximum pressure is 300 mbar.
Productivity - 500 l / min.
The weight of the device is 1.5 kg.

With this model, you can quickly both pump up the boat and pump out air from the cylinders. Able to work both from the 220 V network and from the car's on-board network with a voltage of 12 V.

The kit includes:

Pump.
Tube for pumping air with adapters.
Converter 220/12 V, as well as a connector for connecting to the cigarette lighter.
Guarantee sheet.

The main characteristics of the model:

Producer - Intex (China).
Power supply - 220/12 V.
Productivity - 600 l / min.
The maximum pressure is 800 mbar.
Weight - 3.5 kg.
Dimensions - 260/160/110.

In order for the pump to please its owner with reliable and confident operation, the following recommendations should be observed:

Turn on the pump only after carefully checking all connections for reliability.
Operate only with a fully charged battery.
The device must be installed on the same plane as the inflated object.
Do not leave the device in direct sunlight or in freezing temperatures.
Keep out of water and avoid mechanical damage corps.
Do not kink the hose during operation.
It is not recommended to work continuously for 20 minutes or more.
Transport only in the case supplied with the device.

Depending on the pressure produced at the outlet, electric pumps are divided into 3 categories:

Low pressure pumps (40 mbar). Suitable for pumping small boats. After preliminary pumping, the boat is pumped up with a mechanical pump (frog).
Medium pressure pumps (500 mbar). With their help, you can pump air into boats up to 4 meters long, inclusive, without additional pumping.
High pressure pumps (800 mbar). They are used for inflating large inflatable boats, as well as for inflating boats with an Air deck bottom.

Why do we need a high pressure pump (up to 800-1000 mbar)?

As mentioned above, such a pump is used to inflate larger devices. At the same time, it has an impressive cost. It is better to choose a pump depending on the type of boat and its characteristics.

The advantage of pumps is that a medium-sized boat can be pumped up in 10-15 minutes without much effort.

In addition to all of the above:

The presence of a pressure indicator allows you to control the process of its work.
The presence of the reverse function makes it possible not only to quickly and efficiently inflate the device, but also quickly and efficiently pump air out of it.
Models with 220/12 V supply allow you to save the battery and use it when it is not possible to connect to a 220 V network.

Along with the advantages, there are also disadvantages, which include:

The need for a power source.
The device has a high cost.

For those who have not yet purchased an electric pump, it will be interesting to know:

It is recommended to purchase such devices only from well-known and trusted manufacturers.
The pump is selected based on the volume of its watercraft.
Not bad if the design is equipped with a turbine-piston supercharger.

In other words, the choice of a pump is preceded by various factors that, one way or another, influence this process. The main factor that can become decisive is the financial factor. The more opportunities an angler has in terms of availability of funds, the better the model can be purchased.

Moreover, the dependence on opportunities can also be traced by the presence of a PVC boat, and most importantly, its size. Accordingly, the pump will be purchased. Although many anglers still use the "frog" and only dream of an electric pump.

Summer... So you want to rush somewhere to nature, enjoy the open air by the pond, fry barbecue, sunbathe, play volleyball or just go fishing with friends. There would be a car, there would be a desire, but there will always be a place to relax. But, one way or another, today it is difficult to imagine outdoor recreation without an air mattress (a very popular product for a beach holiday), an inflatable boat, an inflatable pool for children, etc. All this should be in the arsenal of a modern summer resident or tourist.

An inflatable boat, for example, is perhaps the best watercraft for those who love fishing today. However, such a boat is required: a) to assemble and b) to inflate. Alas, if an inflatable boat has low pressure, then it naturally loses its qualities. Therefore, always have a pump for pumping at hand. As a rule, pumps are included with inflatable products, but they are very simple, pumping a boat or mattress with them will not be easy and will take a lot of time. On the market, of course, there is a large number of various pumps: manual, foot, electric. However, it is not a trivial task to choose a durable pump, convenient, and besides, to quickly inflate a boat of any size. Or maybe there is a way to pump up the boat without buying a pump for it at all? It turns out there is - you can use a car compressor!

Agree, it is difficult to imagine the owner of an inflatable boat without a car. So why not take advantage of this already existing, powerful enough pump? Of course, this device is designed to swap car tires- it’s just not possible to adapt it to a boat (at least for purely geometric reasons). You need some sort of adapter. You can, of course, try to make it yourself (there are such craftsmen), but it’s still more correct when there is (and is successfully used) a special nozzle for pumping inflatable products. Not only boats, but, of course, any other inflatable products.

The BERKUT brand, known for its legendary automotive compressors, has introduced a unique adapter under the article VT-300. This device is based on Venturi tube technology, named after an Italian scientist. The principle of operation is simple - the pressure of the air flow from the compressor decreases due to the passage of a narrowed section of the pipe. And the productivity (volume of supplied air) is increased due to a special conjugated air duct. The BERKUT VT-300 adapter is connected to the compressor hose by means of a threaded connection and can be used together with nozzles designed for inflating and, of course, deflating air from inflatable boats, mattresses, pools and all other products that require a sufficiently large volume of air.

BERKUT trademark adapter easy to apply. First you need to choose a nozzle (one of the three included) for pumping air, then connect it to the desired inlet, insert it into the desired product (for example, into air valve inflatable boat) and start inflating.

If the inflatable product, using the VT-300 nozzle, is not inflated to the desired pressure level, then you can close the air duct (deflation outlet) with your finger in order to increase the air pressure. But keep in mind that holding (blocking) the outlet with your finger for a long time can cause pumping. So you need to take precautions!

The presence of a water vehicle not only gives freedom of movement, but also allows you to create comfortable conditions for high-quality fishing. To date, the market for fishing products is represented by huge selection boats, but the most popular are boats made of polyvinyl chloride (PVC).

Water vehicles made of PVC material have good performance characteristics: high strength, lightness, ease of use, high water resistance.

To bring the boat into working condition, it is necessary to fill it with air, inflate it. As an aid, manufacturers provided special devices - pumps. Among the variety of devices, PVC electric boat pumps have proven themselves well.

content

Advantages and disadvantages of electric pumps

To positive qualities special devices powered by an electrical power source include:

Speed. Unlike mechanical pumps, electrical devices make it possible to bring a two-seater boat into readiness in just 10-15 minutes.
Practicality. With the help of the device, you can not only fill the cylinders of the boat with air, but also inflate the tires of the car, air mattress and other rubber products.
Requires no physical effort, it is enough to connect the valves and the device is ready for operation.
The presence of a pressure gauge and reverse, which allows you to control the density of the air and not release it back.
The ability to reverse to produce a reverse cycle.
Has a built-in adapter. The electric motor can be powered from the mains, conserving battery power.

The negative points include:

Requirements to electrical source nutrition. As a rule, the requirements are made for a car or stationary battery with a sufficient charge of energy.
The cost of an electrical appliance.

Given the large range of models, purchase quality device at the best price is real.

Types of pumps

Electric sets for inflatable boats made of PVC material are classified as follows, according to the pressure supply:

low type, where in a relatively short period of time the PVC boat is inflated with air, but in most cases this pressure is not enough to bring the vessel into working condition. Additionally, foot pumps are used.
Medium and high type. Electrical appliances that provide medium and high pressure are able to pump up the boat as quickly and efficiently as possible without the use of auxiliary means. Another advantage of this solution is the fully automated process of filling the cylinders of the craft, there is no need for a person to constantly be present and control the device. The main thing is to set up the unit to pump the required pressure and connect it to a power source.

Electric pumps for water products made of PVC - material can be of two types, depending on the type of power source:

Mains powered, which frees the owner from maintaining control over the degree of charge of the battery. But, at the same time, the use of the pump requires a power source;
Battery operated. There are external (removable) and internal batteries. Removable models include a spare battery. There are devices on the market for inflating inflatable boats powered by a car battery, which is very convenient.

Pump selection

When choosing a product with electric drives, you should pay attention to the following parameters:

Body material. They produce pumps in a plastic case, but the internal metal filling is of priority.
The presence of two cameras. Electrical devices high pressure are equipped with two chambers, since their design contains a diaphragm and piston mechanism.
Pressure regulator (RD). The presence of the RD allows you to prevent the pumping of cylinders and maintain the integrity of the walls of the craft. Depending on the settings of the pressure regulator, the compress stops its work, having reached a certain mark, without the participation of the owner.
The performance of the electrical appliance. The best option reliable device - model up to 450 mbar and a performance indicator up to 500 l / min.
The presence of a reverse and check valve, which will significantly simplify the pumping of air when inflating the boat, and releasing it from the compartments when assembling the vessel.
Source of power. It is effective to purchase models with the ability to power from a mains or mobile source.

Conclusion: it is not advisable to use low-pressure units, it is high-quality to pump water vehicle PVC material will not work. A poorly inflated water vehicle is a danger to everyone on board.

Pump Rating

To choose a quality electric pump for PVC boats, it is recommended that you familiarize yourself with the most popular models today:

This is a standard compact device with a removable 12 V battery, with a capacity of 150 l/min. The pumping time for an inflatable boat 3.5 m long is 20 minutes. The advantage of the pump is the built-in pressure sensor. Cons: high noise level, high the cost of the device is 4,000 rubles.

High pressure model, characterized by sufficient capacity of 1000 l / min, silent operation. The compressor is able to fill the compartments of a 4-meter watercraft in 4 minutes. The unit can be powered by electrical network, and from a portable battery. The device has a reverse and RD. The price is fully justified by the quality - 10,000 rubles.

This is a standard two-section model, equipped with a pressure regulator, removable battery, reverse. Advantages of the electric pump: low weight (1.5 kg), special storage case. Sufficiently good performance of the device allows you to pump up a watercraft 3.8 m long in 4 minutes, 7.5 m in 15 minutes. The power of 800 mbar is more intended for large boats with an inflatable bottom. The price of the product is 12000 rubles.

The electric appliance is ideal for amateur fishing. Its operating characteristics are: productivity of 450 l / minute, pressure regulator up to 300 mbar, autonomous operation of a removable battery is 15 minutes. Price 7500 rub.

The pump from a Chinese manufacturer, adequately copes with the tasks of pumping and releasing air, is distinguished by a power of 195 W, a capacity of 750 l / min. Excellent value for money and quality. The price of the model is 4000 rubles.

Pump operation

You can extend the operational life of the boat device by observing the following rules:

The device must be turned on after connecting to the boat valve and while the car engine is running. Such an installation will prevent uneven distribution of air inside the compartments.
A special device for inflating the boat must be installed exclusively on a flat surface. and be protected from UV radiation.
During transport and at the time of use care must be taken with the body of the device.
The compressor must be kept clean, avoiding kinks in the hose. You should know that the pump housing is afraid low temperatures, there is a high probability of damage to the plastic.
To protect the unit from mechanical damage during transportation and storage, it is recommended to use a special case, bag.
Periodically, it is necessary to inspect the device, clean it from various contaminants. Given the specifics of fishing, there is a high probability of moisture getting on the device, it is recommended to dry the compressor thoroughly.

It is recommended to purchase an electric air blower from trusted manufacturers and specialized outlets where you can get a guarantee for the device.
It is necessary to choose a boat pump in accordance with the size of the boat.
It is recommended to pay special attention to the technical characteristics of the device (power, performance, etc.).
Observe the rules for operating and storing the device.

Adapter for a car pump for pumping boats and other things.

It's a great idea to replace an expensive electric pump for boats with a car compressor, which is always in the car for most. You no longer need to carry two pumps, you just need a pump adapter. One side is suitable for most valves used on PVC boats, the second side is for the compressor.

Our online store site will help you choose everything you need from accessories for your PVC inflatable boat

0 reviews for Adapter for car pump for boat inflation

Delivery

Dear buyer!
The delivery service of our Tocamp online store is open seven days a week. And we are glad that you chose our store. We will deliver the goods within 1-3 business days from the moment the order is placed. Our managers will be happy to provide you with more detailed information about the delivery time.

The minimum order amount is 500 rubles.

Delivery in Moscow

The cost of delivery in Moscow within the Moscow Ring Road is 350 rubles.

When ordering more than 10,000 rubles and weighing less than 10 kilograms, delivery will be free, within the Moscow Ring Road

If the order value is less than 1000 rubles, the delivery cost is 500 rubles.

Delivery across Russia

If you need to deliver goods to other cities in Russia, then there are several options.

1. You place an order, We confirm the availability of the goods you have chosen, you make an advance payment from 20% to 100% of the cost of the order, using the BLIC transfer of Sberbank, transfer to our Sberbank card or in another agreed way, and we send the goods you have chosen after receiving the funds Russian Post or EMS Russian Post. Upon receipt of the order, you will only have to pay the cost of postage, which you can calculate on the Russian Post website.
Our company gives a guarantee that after receiving the money for postage and the ordered goods, we will send it to you within 1-3 days.
Our company guarantees that all ordered goods will be packed properly to ensure their integrity and safety. In the event that we are unable to send you the ordered goods, we undertake to send you the money back as soon as possible.

Sending oversized parcels is carried out only after prepayment!

You can track your package on the Russian Post website.

2. Delivery of goods by a transport company is subject to 100% prepayment.

Delivery to the Russian Post and to the transport company costs 200 rubles.

Delivery in the Moscow region

Shipping cost is calculated according to the scheme 350 rub.+30 rub. per kilometer.

Remember that the time it takes to get to us can be much more expensive than the cost of shipping.

Pickup possible.For pickup you must be sure to place an order through the site, where you indicate the necessary goods, after which our manager will contact you and specify the pickup time. The pickup point is located at: Moscow, Pyatnitskoe shosse 24 building 1