How to teleport to a location in Skyrim. Skyrim (Skyrim). Cheat codes. Correct entry of cheat codes

08.07.2020

role play The Elder Scrolls 5: Skyrim Special Edition can hardly be called difficult, but there are often situations in it when you simply cannot do without cheat codes. For example, sometimes it is impossible to find a quest item and then the console command comes to the rescue, allowing you to add the desired item directly to your inventory. In addition, with the help of codes, you can significantly improve your financial condition. In general, welcome to the list.

Note: most of the cheats, codes and console commands presented here are also suitable for the original Skyrim.

How to remove squares when entering commands in the console

You must first find the Interface folder in the following directory: Skyrim Special Edition\Data. In it, open the fontconfig.txt file and replace the following line:

map "$ConsoleFont" = "Arial" Normal

map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Note: if after changing the line you cannot save the file or the system tries to make a copy of this file, then you need to go to its properties (right-click) and uncheck the “Read Only” option.

How to enable English in the console

To do this, go to the Skyrim Special Edition folder located in the C:\Users\username\Documents\My Games\ directory and open the Skyrim.ini file. You need to find the following line in it:

sLanguage=RUSSIAN

Don't change it, just add the line sConsole=ENGLISH after it. Now in the console you will immediately write in English.

Note: If it is still not possible to switch to English in the console or if you do not have a Skyrim.ini file, then delete the above line and set English as the default language in the Windows operating system. You need to right-click on the language bar (located in the lower right part of the screen), then select "Options" and select "English" in the menu.

Skyrim basic cheats

To use Skyrim cheats, you will first need to open the console - to do this, press the [~] (tilde) key. Then enter any of the codes you need:

gm - activate god mode (become invincible)
tcl - allows you to pass through any obstacles (become a ghost)
tmm 1 - makes it possible to reveal all points of interest on the map of the game world
killall - kills all NPCs in the area (allies are also included in this list)
psb - allows you to get all the dragon screams, talents and spells that exist in the game
qqq - quick exit from the game
advlevel - level up (no ability points added)
tfc - "free" camera ( great team for stunning shots)
tdetect - makes it possible to steal without any consequences (turns off the sight of "NPCs")
tcai - activates and deactivates NPC Al (they stop fighting)
set timescale to 0 - stop the time (if you enter 10000 instead of zero, the day will pass in a couple of seconds)
sexchange - sex change (face may not change)
showracemenu - opens the hero creation menu: you can change the gender, race and appearance of the character. There is a risk of redistribution of all skills, so we advise you to save the game before using this command
player.setav invisibility 1 - activation of invisibility (not only opponents, but also allies will stop noticing you). To disable, enter 0 instead of 1
player.modav carryweight X - Increases the hero's maximum carrying weight by X value
player.setav speedmult X - change movement speed by X percent (activated by pressing the Alt key)
player.setscale X - increasing the height of the hero by the value of X: 1 - 100 percent, 2 - 200 percent, and so on
setgs fJumpHeightMin 100 - change jump height
player.setav Health X - change the maximum number of hit points
player.setav Magicka X - change max mana points
player.setav Stamina X - change max stamina points
player.setav attackdamagemult X - Increase weapon damage X times
player.setav leftweaponspeedmult X - Increases attack speed with left hand weapons x times
player.setav weaponspeedmult X - Increases attack speed with off-hand and two-handed weapons x times
player.setav LeftitemCharge X - charge the weapon in the left hand for X charges
player.setav RightitemCharge X - charge a weapon in right hand, for X charges
player.additem 0000000F X - add X gold to inventory
player.additem 0000000A X - add X lockpicks to inventory
player.placeatme 0010BF90 - Summons Spectral Horse to help players (may appear in the room)
player.setcrimegold 0 - cancel any bounty on hero's head (nulls crime)
player.addspell 00092C48 - adds the talent "Lycanthropy", which allows you to turn into a werewolf (to activate you need to press the "Z" key)
player.addspell 000B8780 - infects the character with the Sanguinare Vampiris disease. After three days, your hero with a 10% chance can turn into a vampire (you can find out by the appearance of the active effect "weakness to fire"). If you have not become a bloodsucker, write the command
player.removespell 000B8780 and then use player.addspell 000B8780 again
player.removespell 000B8780 - cures the Sanguinare Vampris disease in the first stage, that is, when you turn into a full-fledged vampire, this command will no longer work
setstage 000EAFD5 10 - Cures lifesteal completely, but only lasts once as it simply completes the quest
player.moveto - teleports the character to the selected object (write the number without brackets)
coc qasmoke - teleports the character to a special dungeon where all the items in the game are stored (rummage around the chests)
coc riverwood - teleportation from the above dungeon. You will appear in Riverwood. Instead of this village, you can choose any other settlement (see the list below)
player.setpos [axis] [number] - teleports the character to the specified coordinates. Instead of an axis, write "x", "y" or "z", and instead of a number, indicate the offset along the selected axis (you should write the command without brackets)
prid - selects an object by its identification number (ID). It is analogous to the following action: opening the console and clicking on the object. After entering this command, an inscription with the ID of the selected object appears in the console. After that, you can use any of the codes below without selecting the desired object each time. Thanks to it, you will be able to select some distant thing or character, and then start applying various actions to it: resurrection, viewing inventory, and so on.

Actions with NPCs (characters)

To activate the commands below, you need to get very close to the desired creature or item, then open the console and click on the object with the left mouse button. If the click is successful, the object's identification number will appear in the console. After that, you will be able to use the following cheats:

stopcombat - stop combat with the selected allied character. Before using this command, type player.setcrimegold 0 in the console. If you are attacked by several opponents at once, then enter the above cheat is worth it all at once. The fact is that even if at least one of the enemies continues to beat you, then other NPCs will join him. For the convenience of introducing this command, you can first write tcai (all NPCs will freeze and will not move). We add that this command does not work on constantly aggressive creatures (monsters and evil NPCs in the story). It should be used on guards in violation of the law.
kill - instantly kills the selected creature
resurrect 1 - instantly resurrects the selected creature
resetai - Restores the default dialogue, that is, it erases the character's memory. It should be used when killing an NPC and then resurrecting it, since NPCs killed and resurrected by you often refuse to talk to you later
openactorcontainer 1 - Opens the inventory of the specified creature to exchange things
removeallitems - clears the inventory of the selected NPC, i.e. removes all of his items
equipitem item_id - equips the specified character with the selected item (item IDs are listed below), that is, you can fully equip your ally without spending a single coin
inv - displays a list of items contained in a particular object
duplicateallitems player - move all items from the inventory of the selected character to your personal inventory
resetinventory - resetting the inventory, as a result, the things that the character receives by default remain in it (prisoner items)
setownership - gives ownership of the selected item (the best command for a thief, since you do not have to look for a buyer of stolen goods to cash in the stolen goods)
unlock - unlocks the selected door or chest
disable - hides the selected object
enable - Reveals a creature or item previously hidden with the disable command
markfordelete - deletes the selected object. It is not recommended to use as it can remove even basic objects like walls or buildings. There is no reverse command, so if you want to remove some thing, then it's better to use disable

Managing NPCs (characters) in Skyrim

Thanks to the commands below, you will be able to take control of any creature in the game. You need to do everything strictly according to the instructions. First of all, switch the camera to the 3rd person view (otherwise the method will not work). Then approach the selected monster or NPC and open the console. Left click on the creature and start typing the following commands:

player.TC

Next, close the console. Now you "are" in the body of the previously specified creature. You can do whatever you want with it. Such commands will be useful to players who decide to make some kind of feature film based on Skyrim. To return to your hero, you need to write in the console:

player.TC

Note: after you can control the creature, you will not be able to make it attack other characters or monsters, because when you press the attack button, your hero will start hitting.

You can also turn any NPC in Skyrim Special Edition into your faithful companion. To do this, do the following:

Approach the desired Persian.
Activate the console and click LMB on the character.
Write the command setrelationshiprank player 3
Write the command addfac 0005C84D 1
Then speak to the NPC and in the dialog box tell him "Follow me. I need your help."

Skill upgrade

The commands below allow you to increase various skills and abilities by X percent. That is, let's say your weapon deals 20 base damage to the enemy. If you write down the number 200 as an increasing value, then the total damage will be 60 units: 20 + 20 * 2. To disable the modifier, enter the number 0 in its value. The same formula is used when calculating the lethal power of magic spells.

For example, if you want to increase the spells of the school of destruction by 150 percent, then you need to write the following command in the console: player.setav DestructionPowerMod 150

List of skills:

OneHandedPowerMod - one-handed weapon skill
TwoHandedPowerMod - the skill of using two-handed weapons
MarksmanPowerMod - bow skill
BlockPowerMod - Shield Skill
SmithingPowerMod - Blacksmithing Mastery
HeavyArmorPowerMod - skill to use heavy armor
LightArmorPowerMod - light armor skill
PickPocketPowerMod - Pickpocketing Mastery
LockpickingPowerMod - Hacking Mastery
SneakPowerMod - Sneak Mastery
AlchemyPowerMod - mastery in alchemy
SpeechcraftPowerMod - skill in eloquence
AlterationPowerMod - skill in the school of change
ConjurationPowerMod - mastery in the school of witchcraft
DestructionPowerMod - mastery in the school of destruction
IllusionPowerMod - mastery in the school of illusion
RestorationPowerMod - Mastery in Restoration School
EnchantingPowerMod - mastery in the school of enchantment

Note: You can take a look at the changes to these modifiers in the inventory in the description of items and magic spells.

Leveling all skills

Thanks to the console commands below, you can easily increase all your skills and get the right perks. You will need the following commands:

advskill [skill] (X) - Raises the selected skill by X experience points. It is thanks to her that you can quickly upgrade any skill (you should write the command without parentheses)
player.setav [skill] (X) - Sets the selected skill to X value. It does not give the character experience points, but only increases the skill level. Quite a useful thing when the skill is already pumped to level 100
player.setlevel X - change the level of the hero to the value X (you can write a number from 1 to 255). Recommended for use after applying advskill

An illustrative example:

advskill Destruction 200 - gives 200 experience points to the school of destruction
player.setav Block 80 - Increases or lowers block skill to level 80

List of all skills:

Alchemy - mastery of alchemy
Alteration - school of change
Conjuration - school of witchcraft
Destruction - school of destruction
Enchanting - school of enchantment
Illusion - school of illusion
Restoration - school of restoration
Marksman - shooting skill
Block - blocking skill
HeavyArmor - the skill of wearing heavy armor
LightArmor - the skill of wearing light armor
Lockpicking - hacking skill
Onehanded - the skill of using one-handed weapons
Twohanded - Skill in using two-handed weapons
Pickpocket - pickpocketing skill
Smithing - skill in blacksmithing
Sneak - stealth skill
Speechcraft - eloquence skill

ID of armor sets (sets)

If you do not want to spend time looking for this or that armor, then simply enter the following console command:

player.additem [number] - parentheses are not required

A good example: player.additem 0001394E 1 - adds one pair of Dwemer gloves to inventory.

Dwemer Armor:

0001394D - add armor to inventory
0001394E - add gloves to inventory
0001394C - add boots to inventory
0001394F - add helmet to inventory
00013950 - add a shield to inventory

Daedric armor:

0001396B - add armor to inventory
0001396A - add boots to inventory
000D7A8C - add fire suppression boots to inventory (increase resistance to fire by 50 percent)
000D7A8B - add boots of silence to inventory (your footsteps cannot be heard)
000D7A8A - add mammoth boots to inventory (increase carrying capacity by 50 units)
0001396D - add helmet to inventory
0001396C - add gloves to inventory
0001396E - add a shield to inventory
000D7AF9 - add an earth shield to inventory (increases resistance to electricity by 70 percent)
000D7AF6 - add a heat shield to inventory (increases resistance to frost by 70 percent)
0010DFA3 - add a shield of denial to inventory (increases magic resistance by 22 percent)

Glass armor:

00013938 - add boots to inventory
00013939 - add armor to inventory
0001393A - add gloves to inventory
0001393B - add helmet to inventory
0001393C - add a shield to inventory

Imperial Armor:

000136D5 - add armor to inventory
000136D6 - add boots to inventory
000136D4 - add bracers to inventory
00013EDC - add helmet to inventory
000135BA - add a shield to inventory

Elven Armor:

000896A3 - add armor to inventory
0001391A - add boots to inventory
0001391C - add gloves to inventory
0001392A - add gilded armor to inventory
0001391D - add helmet to inventory
0001391E - add a shield to inventory

leather armor

0003619E - add armor to inventory
00013920 - add boots to inventory
00013921 - add bracers to inventory
00013922 - add helmet to inventory

Dragon Shell Armor

00013965 - add boots to inventory
00013966 - add armor to inventory
00013967 - add gloves to inventory
00013969 - add helmet to inventory
00013968 - add a shield to inventory

Dragon Scale Armor

0001393D - add boots to inventory
0001393E - add armor to inventory
0001393F - add gloves to inventory
00013940 - add helmet to inventory
00013941 - add a shield to inventory

Ebony Armor

00013960 - add boots to inventory
00013961 - add armor to inventory
00013962 - add gloves to inventory
00013963 - add helmet to inventory
00013964 - add a shield to inventory

Orc armor

00013956 - add boots to inventory
00013957 - add armor to inventory
00013958 - add gloves to inventory
00013959 - add helmet to inventory
00013946 - add a shield to inventory

Forsworn Armor

000D8D50 - add armor to inventory
000D8D4E - add boots to inventory
000D8D55 - add bracers to inventory
000D8D52 - add helmet to inventory

nightingale armor

000FCC0F - add armor to inventory
000FCC11 - add gloves to inventory
000FCC0D - add boots to inventory
000FCC12 - add hood to inventory

Blade Armor

0004F912 - add a shield to inventory
0004B28F - add helmet to inventory
0004B288 - add boots to inventory
0004B28D - add gloves to inventory
0004B28B - add armor to inventory

wolf armor

000CAE15 - add armor to inventory
000CEE7C - add boots to inventory
000CEE7E - add gloves to inventory
0004C3D0 - add helmet to inventory

Stormcloak officer armor

0008697E - add armor to inventory
00086981 - add boots to inventory
00086983 - add gloves to inventory
00086985 - add helmet to inventory

Ancient nordic armor

00018388 - add armor to inventory
00056A9D - add boots to inventory
00056A9E - add helmet to inventory
00056B17 - add gloves to inventory

Thieves Guild Armor

000D3AC4 - add gloves to inventory
000D3ACE - add hood to inventory
000D3ACC - add armor to inventory
000D3AC2 - add boots to inventory

Thieves Guild Leader Armor

000E35D7 - add armor to inventory
000E35D9 - add hood to inventory
000E35D8 - add gloves to inventory
000E35D6 - add boots to inventory

ID of unique armor and accessories with bonuses

0007C932 - add Archmage Robe to inventory (increases magic regeneration speed by 100% and reduces mana cost of casting spells by 15%)
000F9904 - add Scholar's Diadem to inventory (reduces mana cost for casting any spells)
000FC5BF - add the Tarch bloodthirst shield to inventory (shield hits deal an additional 3 damage over 5 seconds)
000E41D8 - add Ysgramor's Shield to inventory (increases magic resistance by 20% and increases life bar by 20 units)
000295F3 - add Yngol Helmet to inventory (increases resistance to frost by 30 percent)
000С8911 - add Akatosh's Amulet to inventory (increases the speed of magic recovery by 25 percent)
0002D773 - add Goldur's Amulet to inventory (increases stamina, mana and life scales by 30 units)
00100E65 - add to inventory Necklace of Immunity and Diseases (character gets full immunity to all diseases)
000C891B - add Amulet of Mary to inventory (reduces mana cost for casting restoration school spells by 10%; needed for a wedding)
00061CB9 - add Krosis mask to inventory (increases alchemy, hacking and archery skills by 20 percent)
00061C8B - add a Morokei mask to inventory (increases the speed of magic recovery by 100 percent)
00061CA5 - add Nakrin mask to inventory (reduces mana costs for casting spells of schools of restoration and destruction by 20 percent, and also increases the mana scale by 50 units) illusions by 20 percent)
00061CC2 - add Otar mask to inventory (increases resistance to cold, fire and electricity)
00061CC0 - add Ragot mask to inventory (increases stamina scale by 70 units)
00061CAB - add a Volsung mask to inventory (reduces prices in stores by 20 percent, allows the character to breathe underwater and increases carrying capacity by 70 units)
00061CC1 - add Hevnorak mask to inventory (gives complete immunity to all poisons and diseases)
00061CCA - Add Wooden Mask to inventory
00061CD6 - add a Konarik mask to the inventory (when health reaches a critical level, the mask heals the character with a certain probability and inflicts damage to the wearer's nearby opponents)

Weapon Set IDs

We remind you that to add an item, you need to use the player.additem [number] command without parentheses.

Glass weapons:

000139A3 - add one-handed ax to inventory
000139A4 - add a two-handed ax to inventory
000139A9 - add one-handed sword to inventory
000139A7 - add a two-handed sword to inventory
000139A8 - add mace to inventory
000139AA - add war hammer to inventory
000139A5 - add bow to inventory
000139A6 - add dagger to inventory

Daedric weapons

000139B4 - add an ax to inventory
0001DDFB - add an inferno ax to inventory (sets the enemy on fire and deals 30 fire damage to him)
0001DFCB - add a thunder ax to inventory (drains 15 mana from the enemy and deals 30 electricity damage to him)
000139B5 - add bow to inventory
0001DFEF - add petrification bow to inventory (there is a chance to paralyze the enemy for 6 seconds)
0001DFE6 - add an inferno bow to inventory (sets the enemy on fire and deals 30 fire damage to him)
0001DFE9 - add a bow of winter to inventory (drains 30 stamina from an enemy and deals 30 cold damage to them)
0001DFF2 - add thunder bow to inventory (drains 15 mana from an enemy and deals 30 electricity damage to them)
0001DFFC - add a sacred bow to inventory (turns undead below level 40 to flight)
000139B6 - add dagger to inventory
000139B7 - add a two-handed sword to inventory
000139B8 - add mace to inventory
000139B9 - add sword to inventory
000139B3 - add a battle ax to inventory
000139BA - add war hammer to inventory

imperial weapons

000135B8 - add sword to inventory
00013841 - add bow to inventory

Dwarven weapons

00013994 - add an ax to inventory
00013995 - add bow to inventory
00013996 - add dagger to inventory
00013997 - add a two-handed sword to inventory
00013998 - add mace to inventory
00013999 - add sword to inventory
00013993 - add a battle ax to inventory
0001399A - add war hammer to inventory

Elven weapons

0001399C - add a battle ax to inventory
0001399E - add dagger to inventory
0001399F - add a large sword to inventory
000139A0 - add mace to inventory
000139A1 - add sword to inventory
0001399D - add bow to inventory
000139A2 - add war hammer to inventory

Ebony Weapon

000139B1 - add sword to inventory
000139AD - add bow to inventory
000139B2 - add war hammer to inventory
000139B0 - add mace to inventory
000139AC - add a battle ax to inventory
000139AB - add an ax to inventory
000139AF - add two-handed sword to inventory
000139AE - add dagger to inventory

Orc weapons

0001398B - add a battle ax to inventory
0001398C - add an ax to inventory
0001398D - add bow to inventory
0001398E - add dagger to inventory
0001398F - add a two-handed sword to inventory
00013990 - add mace to inventory
00013991 - add sword to inventory
00013992 - add war hammer to inventory

Forsworn Weapons

000SS829 - add an ax to inventory
000CADE9 - add sword to inventory
000CEE9B - add bow to inventory
000AE087 - add heather geese to inventory (deals 5 extra damage to Nords)

nightingale weapon

000F6527 - add blade to inventory
000F652C - add bow to inventory

Blade Weapons

0003AEB9 - add sword to inventory

Ancient nordic weapons

0002C66F - add sword to inventory
000236A5 - add a two-handed sword to inventory
0001C864 - add hammer to inventory
0002C672 - add an ax to inventory

ID of a unique weapon with bonuses

000F1AC1 - add "Dragon Scourge" to inventory (deals 40 points more damage to dragons and hits other enemies with electricity, taking away an additional 10 points of life from them)
000F5D2D - Add "Pale Blade" to your inventory (deals 25 extra cold damage, turns weak enemies to flight for 30 seconds, and drains 50 stamina)
000956B5 - add "Vuutrad" to inventory (does the most damage to elves)
000B3DFA - add "Crayon's Eye" to inventory (activates fire explosion magic, setting enemies on fire and causing them additional fire damage)
000A4DCE - Add "Bloody Thorn" to inventory (sucks the soul from the enemy and transfers it to stone if he dies within 3 seconds after being hit)
00053379 - add "Fierce" to inventory (deals 15 extra cold damage and takes 15 stamina)
000F8317 - add "Cooler" to your inventory (deals 30 additional cold damage and paralyzes the enemy for 2 seconds with a small probability)
00035369 - add "Staff of Magnus" to inventory (drains 20 magic points per second from the enemy or health if the enemy has no mana)
0010076D - add "Staff of Hevnorak" to inventory (deals 50 electricity damage to enemies over 30 seconds). Must be applied on the surface.
000AB704 - add "Holdir's Staff" to inventory (can calm weak enemies for 1 minute or capture their souls upon death)
000E5F43 - add "Yurik Goldurson's Staff" to inventory (deals 25 magic damage and drains 50 mana)
00094A2B - add "Phantom Blade" to inventory (deals 3 additional damage, and armor is ignored)
000AB703 - add Curse of the Red Eagle to inventory (able to set fire to low-level undead and put them to flight)
0009FD50 - add "Fury of the Red Eagle" to inventory (deals 5 additional fire damage and sets the enemy on fire)
000B994E - add "Valdar's Lucky Dagger" to inventory (increases critical hit chance by 25 percent)
0006A093 - Add "Tandil's Staff" to inventory (pacifies people and creatures below level 12 for 1 minute).

Daedra Artifact IDs

To obtain an artifact, use the standard command: player.additem 0004E4EE 1 – add one piece of the Dawn Radiance sword to your inventory.

000240D2 - add the Mehrunes Razor dagger to your inventory (there is a small chance to kill the enemy when hitting)
000233E3 - add "Mace of Molag Bal" to inventory (drains 25 mana and stamina, and also fills a soul gem if the enemy dies within 3 seconds after being hit)
0004E4EE - add the sword "Radiance of Dawn" to the inventory (deals 10 points of additional damage, and also adds the likelihood of a fiery explosion when destroying the undead)
000EA29C - add two-handed sword to inventory Ebony Blade» (the enemy does not perceive a blow with this sword as an attack) (two-handed sword)
0001C4E6 - add "Ax of Sorrow" to inventory (drains 20 stamina from the enemy)
0002ACD2 - Add a two-handed hammer "Volendrang" to your inventory (drains 50 stamina from the enemy)
0002AC6F - add Wabbajack staff to inventory (the effect of using it is completely random)
0001CB36 - add the staff "Rose of Sanguine" to inventory (summon Dremora for 1 minute)
00035066 - add the Skull of Corruption staff to inventory (deals 20 additional damage and collects dreams from people, increasing damage up to 50 units)

0002AC61 - add to inventory light armor "Skin of the Savior" (increases resistance to poisons by 50 percent, and to magic by 15 percent)
00052794 - add heavy armor "Ebony Mail" to your inventory (reduces noise from steps, and enemies that come too close to you start taking 5 damage per second from poison)
000D2846 - add "Mask of Clavicus Vile" to inventory (increases eloquence by 10 units, increases mana recovery by 5 percent and reduces prices in stores by 20 percent)
00045F96 - add Spellbreaker shield to inventory (can absorb up to 50 magic damage while blocking)

0002C37B - add "Ring of Namira" to inventory (increases stamina by 50 units; eating corpses increases life bar and health regeneration rate)
0002AC60 - add "Ring of Hircine" to inventory (gives additional transformation to werewolves)
0001A332 - add the book "Ogma Infinum" to inventory (you can add 5 experience points to several skills) (book)
00063B27 - Add "Azura's Star" to your inventory (it's an infinite soul gem)
00063B29 - add "Black Star" (unique soul gem) to inventory
0003A070 - add "Skeleton Key" to inventory (non-destructible master key)

dragon screams

Thanks to special console commands in the game, you can get any dragon screams or talents, making your hero a true dragonborn. The command looks like this:

player.teachword - teaches the character the selected shout, no need to add parentheses

An illustrative example: player.teachword 13E22 - learn the first stage of the Unrelenting Force. To learn the second and third levels of the dragon cry, you must definitely learn the first word, otherwise the system will not work. That is, you first need to enter the code with the first step, then with the second and finally with the third.

Below will be the IDs of all dragon shouts by level. First comes the first word, then the second, and finally the third:

46B89 / 46B8A / 46B8B - Learn the first/second/third stage of the Dragon's Call (use one ID at a time)
13E22 / 13E23 / 13E24 - learn the first / second / third stage of the Ruthless Force
602A3 / 602A4 / 602A5 - learn the first / second / third stage of the Ice Form
6029A / 6029B / 6029C - Learn the first/second/third stage of Storm Call
20E17 / 20E18 / 20E19 - learn the first / second / third stage of Fire Breath
48ACA / 48ACB / 48ACC - learn the first / second / third stage of Slow Time
2F7BB / 2F7BC / 2F7BD - learn the first / second / third stage of the Rapid Charge
60291 / 60292 / 60293 - learn the first / second / third stage of Friendship with animals
3291D / 3291E / 3291F - learn the first / second / third stage of Elemental Fury
32917 / 32918 / 32919 - learn the first/second/third stage of Incorporeality
5D16C / 5D16D / 5D16E - Learn Frost Breath Stage 1/2/3
602A0 / 602A1 / 602A2 - learn the first/second/third stage of Voice Throw
5FB95 / 5FB96 / 5FB97 - learn the first / second / third stage of Disarmament
3CD31 / 3DC32 / 3CD33 - learn the first / second / third stage of Clear Sky
51960 / 51961 / 51962 - learn the first / second / third stage of the Call of Valor
44251 / 44252 / 44253 - learn the first / second / third stage of the Dragon Slayer
60297 / 60298 / 60299 - learn the first/second/third degree of the Death Sentence
60294 / 60295 / 60296 - learn the first/second/third stage of Aura Whisper
6029D / 6029E / 6029F - learn the first / second / third stage of the World of kin
3291A / 3291B / 3291C - learn the first / second / third stage of Fright

To activate the cry, as you know, the souls of dragons are required. Of course, you can get them from dead dragons. If you urgently need a lizard soul, but there is nowhere to get it, then you can use the following command:

player.modav dragonsouls X - the player gets X dragon souls (it sets the total number of lizard souls absorbed by the hero, and does not add them to him)

Shouts cannot be used continuously, as they need to be restored before each use. If you want to remove this shortcoming, then enter the following command:

player.setav shoutrecoverymult 0 - Dragon Shouts have no cooldown, meaning they can be used continuously

IDs of ingredients, potions, soul gems and arrows

To get the items you need, you just need to write the following console command:

player.additem [number] - parentheses do not need to be written

A good example: player.additem 00039967 20 - adds 20 blacksmith elixirs to inventory. Below will be the IDs of all the above items.

Elixirs:

00039BE5 - get a potion of full health restoration
00039BE7 - get a potion of full mana restoration
00039CF3 - get a potion of full restoration of stamina
00073F34 - Get a Deadly Poison Potion (deals 65 poison damage)
00039D12 - add enchanter's elixir to inventory
00039967 - add blacksmith's elixir to inventory

Soul Stones:

0002E4F4 - add a large soul stone to inventory (not filled)
0002E4FB - add a large soul stone to inventory (filled)
0002E4FC - add a great soul stone to inventory (not filled)
0002E4FF - add a great soul stone to inventory (filled)
0002E500 - add a black soul stone to inventory (not filled)
0002E504 - add black soul stone to inventory (filled)
00063B27 - add Azura's Star to inventory (not filled)
00063B29 - add Azura's Black Star to inventory (not filled)

00038341 - add Falmer arrows to inventory
00034182 - add ancient nordic arrows to inventory
000236DD - add darts to inventory (issued only after completing the main storyline)
00020F02 - add rusty iron arrows to inventory
00020DDF - add iron arrows to inventory
000139C0 - add daedric arrows to inventory
000139BF - add ebony arrows to inventory
000139BE - add glass arrows to inventory
000139BD - add elven arrows to inventory
000139BC - add dwemer arrows to inventory
000139BB - add orc arrows to inventory
0001397F - add steel arrows to inventory

0005ACE5 - add steel ingots to inventory
0005ACE4 - add iron ingots to inventory
0005ACE3 - add silver bars to inventory
0005AD93 - add carundum ingots to inventory
0005AD99 - add orichalcum ingots to inventory
0005AD9D - add ebony ingots to inventory
0005AD9E - add gold bars to inventory
0005ADA0 - add mercury ingots to inventory
000DB8A2 - add Dwemer metal ingots to inventory
0005ADA1 - add refined malachite to inventory
0005AD9F - add refined moonstone to inventory

0003ad52 - add bearskin to inventory
0003AD8F - add cowhide to inventory
0003AD90 - add deerskin to inventory
0003AD8E - add goat skin to inventory
0003AD93 - add horse skin to inventory
0003AD75 - add snow wolf skin to inventory
000DB5D2 - add leather to inventory
000800E4 - add leather strips to inventory
0003AD74 - add wolf skin to inventory

Gems:

00063B46 - add amethyst to inventory
00063B47 - add diamond to inventory
00063B45 - add grenades to inventory
00063B43 - add emerald to inventory
00063B42 - add ruby to inventory
00063B44 - add sapphire to inventory
0006851E - add flawless amethyst to inventory
0006851F - add a flawless diamond to inventory
00068521 - add flawless grenade to inventory
00068520 - add a flawless emerald to inventory
00068522 - add flawless ruby to inventory
00068523 - add flawless sapphire to inventory

0003AD5B - add Daedra heart to inventory
0003ADA3 - add dragon scales to inventory
0003ADA4 - add dragon bones to inventory
000E7ED0 - add hawk feathers to inventory
0003AD60 - add void salt to inventory

Treasure Chest IDs

Each treasure chest contains items of a certain class. For example, if you call a chest with staves, then in it you can find absolutely all the magic canes available in the game. To call the corresponding chest, you need to use the following Skyrim cheat code:

player.placeatme - naturally, parentheses do not need to be specified

For clarity, let's imagine an example: player.placeatme 000C2D3B - a chest with ordinary books will appear in front of you. Below are the IDs of all treasure chests:

000C2CDF - get a chest with enchanted weapons
000C2CD7 - get a chest with enchanted armor, jewelry, mage and rogue clothes
000C2CE0 - get a chest with standard weapons
000C2CD6 - get a chest with standard armor
000C2CDE - get a chest with staves
000C2CD8 - get a chest with armor and jewelry, clothes for a mage and a robber
0010D9FF - get a chest with skill books
000C2CD9 - get a chest with spell books
000C2D3B - get a chest with regular books
000C2CD4 - get chest with arrows
000C2CDA - get a chest with ingredients
000C2CDB - get chest with keys
000C2CE1 - get a chest with spell scrolls
000C2CE2 - get a chest with potions, elixirs and tinctures

Important: when opening some chests (usually with enchanted things), the game may freeze for 1-2 minutes (it all depends on the power of your computer). The fact is that they contain a lot of things and it takes a certain time to load them.

Completing quests

In some missions, bugs and errors may occur, due to which it is simply impossible to complete the quest. Below we will present you with a few console commands that will help you overcome such difficulties:

showquesttargets - you can see the ID of the active task shows the ID
getstage - thanks to it, you can find out at what stage of the passage of a particular quest you are (braces, of course, do not need to be written)
setstage [stage] - you can independently specify the stage of execution of a particular task in order, for example, to jump over a problematic or boring section
movetoqt - instant transfer to a key point or the last unfinished stage of a task in progress
sqs - you can find out the names of all stages of the active job
resetquest - allows you to remove all stages of a particular mission, allowing you to play it again (if you want the quest to disappear from the quest log, then you need to save and then load the game)
player.completequest - Complete a running task. We do not advise you to use this command, as it does not allow you to take on the next mission if you are dealing with a quest chain. Only use if you don't plan on going through any further quests in the chain.

TGM	Enable Character Immortality, Infinite Weapon Charges, Infinite Carry Weight
TCL	Enable the ability to walk through walls
TMM 1	Open all locations on the global map
Player.SetAV Invisibility 1	Enable invisibility. Neither enemies nor allies will notice you. (To disable invisibility, enter 0 instead of 1)
Player.SetAV SpeedMult [#]	Set running speed as a percentage. (default: 100%)
SetGS fJumpHeightMin[#]	Set jump height (default: 100%)
Player.SetAV AttackDamageMult [#]	Increase weapon damage by # times
Player.SetAV LeftWeaponSpeedMult [#]	Increase the attack speed of your off-hand weapon by # times
Player.SetAV WeaponSpeedMult [#]	Increase the attack speed of your right hand and two-handed weapons by # times (all two-handed weapons count as a right hand weapon)
PSB	Get all spells, abilities, shouts of power (Warning! leads to game instability, not recommended for use)

skyrim codes
1.2. The main characteristics of the hero

ShowRaceMenu	Change the character's race. Allows you to go back to the character settings menu (Attention! After entering this code, character skills may be reset)
Player.AdvLevel	Raise character level
Player.SetLevel[#]	Set the required character level
Player.SetAVHealth[#]	Set max. number of lives in # units
Player.SetAV Magicka [#]	Set max. amount of magic in # units
Player.SetAV Stamina [#]	Set max. amount of stamina in # units. If set great importance, then the character will not get tired while running
Player.ModAV CarryWeight [#]	Increase your character's maximum carry capacity by # units
Player.SetScale[#]	Increase the growth of your character, where #: 1 - 100%, 1.1 - 110%, 0.9 - 90%, etc.

Codes in the game Skyrim
1.3. Character Skills

Increasing experience in skills:

AdvSkill Onehanded 999999	develop the "one-handed weapon" skill for 999999 experience
AdvSkill Twohanded 999999	Two-handed weapon
AdvSkill Marksman 999999	shooting
AdvSkill Block 999999	block
AdvSkill Smithing 999999	blacksmith craft
AdvSkill HeavyArmor 999999	heavy armor
AdvSkill LightArmor 999999	light armor
AdvSkill Pickpocket 999999	pickpocketing
AdvSkill Lockpicking 999999	breaking
AdvSkill Sneak 999999	secrecy
AdvSkill Alchemy 999999	alchemy
AdvSkill Speechcraft 999999	eloquence
AdvSkill Alteration 999999	change
AdvSkill Conjuration 999999	witchcraft
AdvSkill Destruction 999999	destruction
AdvSkill Illusion 999999	illusion
AdvSkill Restoration 999999	recovery
AdvSkill Enchanting 999999	enchantment

Setting the skill level:

Player.SetAV Onehanded 100	raise "one-handed weapon" to level 100
Player.SetAV Twohanded 100	Two-handed weapon
Player.SetAV Marksman 100	shooting
Player.SetAV Block 100	block
Player.SetAV Smithing 100	blacksmith craft
Player.SetAV HeavyArmor 100	heavy armor
Player.SetAV LightArmor 100	light armor
Player.SetAV Pickpocket 100	pickpocketing
Player.SetAV Lockpicking 100	breaking
Player.SetAV Sneak 100	secrecy
Player.SetAV Alchemy 100	alchemy
Player.SetAV Speechcraft 100	eloquence
Player.SetAV Alteration 100	change
Player.SetAV Conjuration 100	witchcraft
Player.SetAV Destruction 100	destruction
Player.SetAV Illusion 100	illusion
Player.SetAV Restoration 100	recovery
Player.SetAV Enchanting 100	enchantment

Codes in the game Skyrim
1.4. Character Perks

With the help of these cheat codes for Skyrim, you can quickly upgrade all the skills and get all the perks. To do this, we need the following cheats:

To upgrade all perks, do the following:

1. Using the AdvSkill [X] cheat, we raise any skill to level 100:

Example: AdvSkill Destruction 999999.

2. Apply the code Player.SetAV [N] 0 - set the skill level to 0.

Example: Player.SetAV Destruction 100.

3. After that, you can again add new experience to this skill. Repeat steps 1 and 2 to earn more ability points. From time to time we lower the level of the character to the previous value.

4. Earned points, which are several times more than usual, we spend on the purchase of all available perks in Skyrim.

All perks and spells can be added manually if you know their exact name.

Player.AddPerk [name]	Add Ability
Player.RemovePerk [name]	Remove ability. Ability points will not be refunded
Player.AddSpell [name]	Add Magic Ability to Player Character
Player.RemoveSpell [name]	Remove Ability

Skirim codes
1.5. Increase damage from weapons, spells

These codes increase the effectiveness of skills by the required percentage (base value * N%). For combat skills, this means an increase in damage from all hits, spells of this type.

Example: Player.SetAV DestructionPowerMod 100

This code will increase the damage from destruction spells by 100%, that is, twice.

Player.SetAV OneHandedPowerMod [#]	increase the damage of "one-handed weapons" by # percent
Player.SetAV TwoHandedPowerMod [#]	Two-handed weapon
Player.SetAV MarksmanPowerMod [#]	shooting
Player.SetAV BlockPowerMod [#]	block
Player.SetAV SmithingPowerMod [#]	blacksmith craft
Player.SetAV HeavyArmorPowerMod [#]	heavy armor
Player.SetAV LightArmorPowerMod [#]	light armor
Player.SetAV PickPocketPowerMod [#]	pickpocketing
Player.SetAVLockpickingPowerMod [#]	breaking
Player.SetAV SneakPowerMod [#]	secrecy
Player.SetAV AlchemyPowerMod [#]	alchemy
Player.SetAV SpeechcraftPowerMod [#]	eloquence
Player.SetAV AlterationPowerMod [#]	change
Player.SetAV ConjurationPowerMod [#]	witchcraft
Player.SetAV DestructionPowerMod [#]	destruction
Player.SetAV IllusionPowerMod [#]	illusion
Player.SetAV RestorationPowerMod[#]	recovery
Player.SetAV EnchantingPowerMod [#]	enchantment

Cheats from Skyrim
1.6. The screams of dragons

Each line of the table contains three codes. You can only enter one of the three.

Player.TeachWord [shout code]	Learn the word of power
Player.TeachWord 46B89 Player.TeachWord 46B8A Player.TeachWord 46B8B	Call of the Dragon
Player.TeachWord 13E22 Player.TeachWord 13E23 Player.TeachWord 13E24	juggernaut
Player.TeachWord 602A3 Player.TeachWord 602A4 Player.TeachWord 602A5	ice form
Player.TeachWord 6029A Player.TeachWord 6029B Player.TeachWord 6029C	thunder call
Player.TeachWord 20E17 Player.TeachWord 20E18 Player.TeachWord 20E19	fire breath
Player.TeachWord 48ACA Player.TeachWord 48ACB Player.TeachWord 48ACC	Time slowdown
Player.TeachWord 2F7BB Player.TeachWord 2F7BC Player.TeachWord 2F7BD	Rapid dash
Player.TeachWord 60291 Player.TeachWord 60292 Player.TeachWord 60293	friendship with animals
Player.TeachWord 3291D Player.TeachWord 3291E Player.TeachWord 3291F	Elemental Rage
Player.TeachWord 32917 Player.TeachWord 32918 Player.TeachWord 32919	incorporeality
Player.TeachWord 5D16C Player.TeachWord 5D16D Player.TeachWord 5D16E	frosty breath
Player.TeachWord 602A0 Player.TeachWord 602A1 Player.TeachWord 602A2	Disarmament
Player.TeachWord 3CD31 Player.TeachWord 3DC32 Player.TeachWord 3CD33	Clear sky
Player.TeachWord 51960 Player.TeachWord 51961 Player.TeachWord 51962	Call of Valor
Player.TeachWord 44251 Player.TeachWord 44252 Player.TeachWord 44253	dragon slayer
Player.TeachWord 60297 Player.TeachWord 60298 Player.TeachWord 60299	death sentence
Player.TeachWord 60294 Player.TeachWord 60295 Player.TeachWord 60296	Aura whisper
Player.TeachWord 6029D Player.TeachWord 6029E Player.TeachWord 6029F	kin world
Player.TeachWord 3291A Player.TeachWord 3291B Player.TeachWord 3291C	fright

Shouts from Skyrim: Dawnguard DLC

Player.TeachWord 02008A65 Player.TeachWord 02008A64 Player.TeachWord 02008A63	Life drain
Player.TeachWord 020030D4 Player.TeachWord 020030D6 Player.TeachWord 020030D7	Challenge of Durnevir
Player.TeachWord 02007CB7 Player.TeachWord 02007CB8 Player.TeachWord 02007CB9	Soul tear
Player.TeachWord 0201A162 Player.TeachWord 0201A163 Player.TeachWord 0201A164	Call from Cairn of Souls

Shouts of Skyrim: Dragonborn DLC

Open Shouts of Dragons must be activated with Dragon Souls before use. In the game, Souls are only given for killing dragons. With the help of codes, you can add the necessary Souls to your inventory:

To activate dragon screams, press: "Tab" - "Magic" - "Screams", select a cry, press "R" - "Ok". After that, the selected shout can be used.

TES 5: Skyrim Cheats
1.7. Healing from diseases

Player.AddSpell 00092C48	Lycanthropy- a spell to turn into a werewolf. Appears in the "Talents" section. Use the "Z" key to activate. This talent cannot be removed. The reverse transformation into a person will occur automatically, after a certain period of time
Player.AddSpell 000B8780	Vampirism- the disease "Sangvinare Vampiris" appears. 3 days after infection, you have a 10% chance that you will become a vampire. If after 3 days after using this code in the section "Magic" - "Active Effects" appears "Vulnerability to fire" - you are a vampire. If all else fails, use the Player.RemoveSpell 000B8780 command, then again Player.AddSpell 000B8780
Player.RemoveSpell 000B8780	Get cured of vampirism - the disease "Sangvinare Vampiris". It works only at the first stage of the transformation (after the bite). After a full transformation into a vampire, this code does not work!
SetStage 000EAFD5 10 ResetQuest 000EAFD5	Get rid of vampirism. It can cure any stage of the disease. Healing occurs by completing the quest, so in order to apply the code a second time, you must first reset the quest with the “ResetQuest 000EAFD5” command, then type “SetStage 000EAFD5 10” again. (Save before resetting quests)

2. Codes for getting items

TES V: Skyrim codes
2.1. Standard inventory management commands

skyrim 5 cheats
2.2. Codes for gold

The Elder Scrolls V codes
2.3. Armor sets (sets)

Daedric Armor Set

Draconic Shell Armor Set

Draconic Scale Armor Set

Unique armor with bonuses

Player.AddItem 0007C932 1	Robe of the Archmage (armor) + 100% to the speed of recovery of magic; all spells cost 15% less magicka
Player.AddItem 000F9904 1	Scholar's Diadem (helmet) All spells cost less magicka
Player.AddItem 000FC5BF 1	Bloodthirst Tarch (Shield) Shield Bash deals 3 damage. damage over 5 sec.
Player.AddItem 000E41D8 1	"Shield of Ysgramor" +20% magic resistance; +20 pts health
Player.AddItem 000295F3 1	"Helmet of Yngol" +30% cold resistance
Player.AddItem 0002AC61 1	Skin of the Savior (light armor) +50% resistance to poisons and +15% magic
Player.AddItem 00052794 1	"Ebony Mail" (heavy armor) +You move more quietly and enemies that get too close take 5 poison damage per second
Player.AddItem 00045F96 1	Spell Breaker (Shield) +Absorbs up to 50 damage when blocked. spell damage

Masks (helmets) with bonuses

Player.AddItem 00061CB9 1	"Krosis" +20% to hacking, archery and alchemy skills
Player.AddItem 00061C8B 1	Morokei +100% Magicka Recovery Speed
Player.AddItem 00061CA5 1	"Nakrin" + spells of the school of destruction and restoration consume 20% less mana; +50 mana
Player.AddItem 00061CC9 1	"Vokun" + Illusion, Alteration and Affliction spells cost 20% less mana
Player.AddItem 00061CC2 1	"Otar" + resistance to fire, electricity and cold increases
Player.AddItem 00061CC0 1	"Ragot" +70 stamina
Player.AddItem 00061CAB 1	Volsung +20% discount on all products; breathing underwater; +70 weight capacity
Player.AddItem 00061CC1 1	"Khevnorak" + immunity to diseases and poisons
Player.AddItem 00061CCA 1	"Wooden Mask"
Player.AddItem 00061CD6 1	"Konarik" +Gives a chance to heal the wearer and deal damage to nearby enemies when health is low
Player.AddItem 000D2846 1	"Mask of Clavicus Vile" (heavy helmet) +10 Speech. Magicka recovery rate +5%. Favorable prices +20%

The Elder Scrolls 5 codes
2.4. Weapon sets

Maces, Axes, axes

Player.AddItem 00035369 1	"Staff of Magnus" +Absorbs 20 damage. magic per second, if the enemy has no magic - absorbs health
Player.AddItem 0010076D 1	"Staff of Hevnorak" +Within 30 sec. deals 50 damage. lightning damage per second. applied to the surface
Player.AddItem 000AB704 1	"Staff of Holdir" +Soothes weak enemies for 60 seconds. or captures their souls if they die
Player.AddItem 000E5F43 1	"Staff of Jurik Goldurson" deals 25 damage. damage and takes 50 damage. of magic
Player.AddItem 0006A093 1	"Staff of Tandil" +Creatures and people up to level 12 do not fight for 60 seconds
Player.AddItem 0002AC6F 1	"Wabbajack" + Random effect on every use
Player.AddItem 0001CB36 1	"Rose Sanguine" + Summons a Dremora for 60 seconds
Player.AddItem 00035066 1	"Skull of Corruption" +20 pts damage. Dreams gathered from sleeping humans increase damage to 50

Unique weapons with bonuses

Player.AddItem 000F1AC1 1	"Scourge of Dragons" +40 pts damage to dragons and +10 HP. electricity damage vs all
Player.AddItem 000F5D2D 1	"Pale Blade" +25 pts cold damage; subtract 50 stamina from the target; weaker creatures and humans flee for 30 seconds
Player.AddItem 000956B5 1	"Wutrad" +Especially deadly against elves
Player.AddItem 000B3DFA 1	"Crayon's Eye" +Fire blast deals 40 fire damage. damage in a 4.5 m radius and sets targets on fire
Player.AddItem 000A4DCE 1	"Bloody Spike" +Fills a soul gem if an enemy dies within 3 seconds
Player.AddItem 00053379 1	"Fierce" +15 pts cold damage; takes 15 units. enemy's stamina
Player.AddItem 000F8317 1	"Cooler" +30 pts cold damage; chance to paralyze the target for 2 seconds
Player.AddItem 00094A2B 1	"Phantom Blade" +3 units extra damage by ignoring armor
Player.AddItem 000AB703 1	"Curse of the Red Eagle" +Sets undead level 13 or below on fire and rout for 30 seconds
Player.AddItem 0009FD50 1	"Rage of the Red Eagle" +5 units fire damage and sets the target on fire
Player.AddItem 000B994E 1	"Valdar's Lucky Dagger" +25% Critical Strike Chance

Cheats for the game Skyrim
2.5. Accessories

Cheats Skyrim
2.6. Consumables: Ingredients, Soul Stones, Potions, Arrows

Soul Stones

Books

Cheats from the game Skyrim 5
2.7. Treasure chests

The game itself provides special cheat chests that contain all the items certain type. For example, in one chest are all kinds of staves, in the other - all kinds of arrows.

Notes:

After opening cheat chests, the game can freeze a lot. In this case, you just need to wait no more than 1 minute.

If, after opening such a chest, you don’t look at the items, but immediately take all the contents (the “R” key), then the game freezing can be avoided.

Player.PlaceAtMe	Create a new chest right in front of the hero
Player.PlaceAtMe 000C2CDF	Enchanted Weapon Set
Player.PlaceAtMe 000C2CD7	A set of enchanted armor, jewelry, mage and rogue clothes
Player.PlaceAtMe 000C2CE0	Standard weapon set
Player.PlaceAtMe 000C2CD6	Standard armor set
Player.PlaceAtMe 000C2CDE	Staff set
Player.PlaceAtMe 000C2CD8	A set of armor and jewelry, clothes for a mage and a robber
Player.PlaceAtMe 0010D9FF	Skill book set
Player.PlaceAtMe 000C2CD9	Spell Book Set
Player.PlaceAtMe 000C2D3B	Set of regular books
Player.PlaceAtMe 000C2CD4	Arrow set
Player.PlaceAtMe 000C2CDA	Set of ingredients
Player.PlaceAtMe 000C2CDB	A set of keys
Player.PlaceAtMe 000C2CE1	A set of scrolls with spells
Player.PlaceAtMe 000C2CE2	A set of potions, elixirs and tinctures

Skyrim cheat codes
2.8. Enchanting (upgrading) weapons and armor

Enchantment - a skill with which you can independently add magical properties ordinary items.

Rules for creating enchanted items:

You can only upgrade the base item, no other enchantments;

Each item can have a maximum of 2 enchantments;

The quality of the enchantment depends on the Enchanting skill;

1) upgrade the Enchantment skill to level 100 - Player.SetAV Enchanting 100.

2) open all enchantment perks (way to upgrade perks).

There is a cheat code for adding an already finished enchanted item to the inventory. To do this, you need to know the base item code and the enchantment code:

Once enchanted, the item will have a very small charge (170-350). To increase the charge of a weapon, you must pick it up and enter the following code:

skyrim cheat codes
2.9. Legendary weapons and armor

Legendary weapon and armor are standard items, but with significantly improved performance. These things are created by professional blacksmiths (skill level from 91 to 100). The percentage of item improvement directly depends on the level of the Blacksmithing skill. The higher the skill, the better the characteristics of the created legendary item will be.

What you need to upgrade weapons and armor to legendary quality:

1) blacksmithing level 91+;

2) workbench;

3) conventional armor or weapons;

4) ingredients to improve (different for all things).

All these things in Skyrim can be obtained in the usual way, but it will take a long time. With the help of cheat codes, this process can be greatly accelerated. Enter the following codes:

1) Player.SetAV Smithing 100- we pump "Blacksmithing" to level 100;

2) Player.PlaceAtMe 000D932F- create a workbench right in front of you;

3) Player.AddItem [number]– add a blank item to the inventory (item codes can be viewed here).

4) In the game, we approach the workbench, look at what ingredients are needed to improve the selected item;

5) Player.AddItem [number]– add the necessary ingredients to the inventory (item codes can be viewed here);

6) We approach the workbench, we improve the item to legendary quality.

TES V: Skyrim codes
2.10. How to find the ID of an item

You can add absolutely any item to your inventory, the main thing is to know its game code. If you already have some unique item, and you want to create several more copies of this item, then you can determine the item code:

1) In the console, enter the code: Player.ShowInventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In this case, use the second method.

1) The item whose ID you need to find out is placed in an empty box (barrel, chest, bag or something else).

2) We approach the box as close as possible (preferably sit down).

3) Open the console, click on the box in which our item lies, enter the command INV.

4) We are looking for the necessary item by name and look at the ID of the item.

Having learned the item code, we use it in a standard cheat to add an item:

3. Codes for placing objects

Skyrim cheats and codes
3.1. Determining the object code

These commands work only when a certain object is selected in the console. To select an object in the console, you just need to click on it with the mouse. After selecting an object, an inscription with the object code (object_ID) will appear in the console.

To scroll through the text in the console, if there is a lot of it, use the "Page Up" and "Page Down" keys.

If you want to apply several commands to the same selected character or object, then you do not need to select it with the mouse each time, it is enough to select only 1 time (the selection is saved).

There are many invisible objects in the game (sound sources, light sources, quest zones), they can be mistakenly highlighted instead of the necessary item, so it is advisable to be as close to the object as possible to make it easier to hit it. Various game special effects (fog, snow, blizzard) also complicate the process of selecting an object.

Objects that are out of screen visibility can be selected in the console only by their game code ID. This is done using the PRID [item code] command.

skyrim console commands
3.2. Placement of objects

For the following commands to work, you must first select the object - open the console and click on the object. After that, an inscription (object ID) should appear in the middle of the console screen.

(All the objects you create have an ID that starts with FF000...)

Notes:

To apply several commands to the same object, you do not need to select it again each time, the selection is saved.

Sometimes, after applying the Setpos and GetAngle commands, the object moves only visually, physically it remains in the same place (the texture is shifted, not the object itself). To fully move an object, you need to select it and enter two more commands: Disable and enable. You can also enter the command Setscale 1 to update the physical model of the item.

To align an incorrectly placed item, enter:

SetAngle x 0, SetAngle y 0, SetAngle z [any number].

Object Management

Cheats from Skyrim
3.3. Objects for home

Many Skyrim players have their own home or favorite place where they spend a lot of time. But not every place has the necessary jobs: alchemy tables, forges, workbenches.

These cheat codes allow you to install jobs anywhere:

Home furniture

When created, all items appear in front of you in the direction you are facing. To set the item straight, before introducing the cheat, center your gaze so that the character looks straight ahead, and not up or down.

Player.PlaceAtMe 00089A85 1	dummy
Player.PlaceAtMe CC16A 1 Player.PlaceAtMe CC163 1	single door
Player.PlaceAtMe CC164 1	double door
Player.PlaceAtMe B2456 1	dragon head
Player.PlaceAtMe 3FA65 1	elk antler
Player.PlaceAtMe DD9E0 1 Player.PlaceAtMe DD9E1 1 Player.PlaceAtMe CF264 1	moose head
Player.PlaceAtMe D9285 1	crab
Player.PlaceAtMe D9276 1	goat head
Player.PlaceAtMe 3858F 1	fish
Player.PlaceAtMe D928F 1 Player.PlaceAtMe D928D 1	big cat head
Player.PlaceAtMe D9289 1 Player.PlaceAtMe D9288 1	wolf head
Player.PlaceAtMe D9287 1 Player.PlaceAtMe D927D 1	beast head
Player.PlaceAtMe D8282 1 Player.PlaceAtMe D9281 1 Player.PlaceAtMe D927F 1	bear head
Player.PlaceAtMe 93D39 1 Player.PlaceAtMe 93D3B 1 Player.PlaceAtMe 93D3D 1 Player.PlaceAtMe 93D3F 1 Player.PlaceAtMe 93D41 1 Player.PlaceAtMe 93D43 1 Player.PlaceAtMe 93D45 1 Player.PlaceAtMe 93D47 1 Player.PlaceAtMe B7E3E 1 Player.PlaceAtMe B7E40 1 Player.PlaceAtMe BF9CF 1 Player.PlaceAtMe BF9D1 1 Player.PlaceAtMe BF9D3 1 Player.PlaceAtMe BF9D5 1	carpets (square)
Player.PlaceAtMe 95498 1 Player.PlaceAtMe 954A3 1 Player.PlaceAtMe 954A4 1 Player.PlaceAtMe 954A5 1	carpets (round)
Player.PlaceAtMe 5C015 1 Player.PlaceAtMe 5C016 1 Player.PlaceAtMe 5C017 1	animal skins
Player.PlaceAtMe 7EA42 1	wall burning candles
Player.PlaceAtMe 1F24A 1	table candle
Player.PlaceAtMe 5AD5B 1	ceiling lamp
Player.PlaceAtMe 77761 1	light source for illuminating dark rooms (invisible, cannot be selected/moved/deleted after installation)
Player.PlaceAtMe FFF46 1 Player.PlaceAtMe FFF48 1	blue light source

Mannequin Codes:

4. Codes for fast travel

Help [name part] 0	To find out the exact names of locations, enter the command. (There should be no spaces in the name of the location, and if there are, enter only the first word). In the list that appears, using the console scroll keys "PageUp" and "PageDown", we find the following lines: CELL: location_name (location id). Find out the full name or id of the location.
COC [location_name]	Teleportation to the specified location
COC Qasmoke	Teleportation to a test location. Everything is here game items and devices for the manufacture of any items
Player.MoveTo [object code]	Teleport to the specified object (character)
Player.GetPos x Player.GetPos y Player.GetPos z	Find out your current location in coordinates. (You need to enter 3 commands in turn and write down the shown coordinates. After that, you can teleport to this point using the following code)
Player.SetPosx[#] Player.SetPos y[#] Player.SetPos z [#]	Move your character to the specified coordinates. (Do not close the console until you apply the command 3 times for each of the coordinates. The movement occurs only after the console is closed).
TMM[#]	Enable/disable markers on the world map - remove everything. - show all. - show everything, but without the ability to fast travel

5. Codes for friendly characters (NPCs)

skyrim codes
5.1. Stop fight with NPC

1) We get up so that at once all the characters who attacked us are visible on the screen.

2) Turn on the console, select each NPC in turn, enter the codes for them:

3) Player.SetCrimeGold 0- turn off the reward for our head;

4) Stop Combat– turn off the aggressive behavior of the character.

5) Only after we turn off the reward for our head from all enemies, we can close the console. (If at least one NPC is not coded, he will start attacking us again, and after him all the other NPCs will become aggressive again. The remaining hostile characters are clearly visible on the minimap, they are highlighted with red dots, you must definitely apply the code to all) .

These commands do not work on our permanent enemies (monsters and some story characters) who always attack us.

Skyrim cheat codes
5.2. NPC customization

Setting physical properties NPCs:

GetPos [axis]	Gives the position along the axis (x,y,z)
SetPos [axis] [#]	Gives rotation along the axis (x,y,z)
SetAngle [axis] [#]	Rotates an object along the axis (x,y,z)
Move To Player	Move the NPC to the player character. If you use Player.PlaceAtMe, then a clone of an NPC will be created
Disable	"Turn off" the object. It will remain in the game, but will not be displayed and functional. For complete removal see markfordelete
enable	"Enable" object
Kill	Kill selected target
Resurrect 1	Resurrects the selected target
Reset AI	Restore Default Dialogs - Erase the memory of the selected NPC. This command must be used only if you killed someone, resurrected and after that he refuses to talk to you
SetEssential[#]	Makes an NPC mortal (0) or immortal (1)
Mark For Delete	Delete the selected object or character. Important: using this code, you can remove not only some chest, but also invisible objects that can be selected by clicking on them, and which are necessary for normal functioning games. Be careful when using this command. Objects created by console commands are deleted immediately, while objects present in the game initially are deleted after saving and loading the game. There are no reverse commands. To remove objects from the game, it is recommended to use this command, and not disable, since the latter only hides the item, and does not remove it, as a result of which saves are bloated due to unused objects.

Customization of the personality, characteristics, skills of the NPC:

SetRace	Changes the character's race. There are also ElderRace and ElderRaceVampire values - these races are something like elders, (for example, Esbern is Elder, but he is also a Nord. Greybeards are also included here). Also, if you add Vampire at the end, then the object will become a vampire (example: OrcRaceVampire). Race names: Argonian Race- Argonian, Breton Race- Breton, Dark Elf Race- Dark Elf, Elder Race- Forest Elf, High Elf Race- High Elf, Imperial Race- Imperial, KhajiitRace- Khajiit, Nord Race- Nord, Orc Race- Orc, RedguardRace- Redguard.
SetLevel ,,,	Sets the level of an NPC. Enter SetLevel 1000,0,1,81 to make the character evolve with the player's character from level 1 to 81. one) [% ? 10] The percentage of the level to the main character (1000 = 100.0%). 2) How much above or below the level. 3) [initial level] The most initial level of an NPC. 4) [level cap] The maximum level an NPC can evolve to
GetAV [har-ka]	Gets the current value of each variable
ModAV [char] [#]	Adds the specified amount to the value
ForceAV [char] [#]	Sets value to # count
SetAV [char] [#]	Sets the specified amount of the specified value. Unlike modav, it does not add to the value, but sets it
HasPerk	Checks if the character has the given ability.

NPC equipment setup:

INV	Display the entire inventory of an object/NPC
SBM	Displays the trading menu with a character or creature even if it is not a merchant
OpenActorContainer 1	open the inventory of the selected creature. You can exchange items
DuplicateAllitems Player	copy all items from the inventory of the specified NPC or object to your inventory
AddItem[#]	Adds an item to an NPC's inventory. Note: it is useful to add gold to merchants
Equipitem[#]	Equips an item on the selected character.
RemoveAllItems	Removes all items from an object
ResetInventory	Equip the selected character in their original outfit

Setting up movements, NPC relations:

SetRelationshipRank[#]	Changes the relationship of two NPCs to each other. [#] Possible values #: -4 - worst opponents, -3 - enemies, -2 - enemies, -1 - rivals, 0 - acquaintances, 1 - friends, 2 - confidants, 3 - allies, 4 - lovers. All other values are set to 0 (familiar) Note: This code will also work on the player if you type: player.SetRelationshipRank [#]
TDetect	Turn off NPC vision. Theft without consequences. Doesn't work on pickpocketing
TCAI	Enable/disable aggressive actions by characters and creatures. After cast, everyone stops fighting.
TAI	Enable / disable the intelligence of characters and creatures. All the way to moving
Player.SetCrimeGold[#]	Sets a bounty on the head of a player character in a specific faction
Player.SetCrimeGold 0	Cancel the bounty on your head
Stop Combat	End combat with selected friendly character

Skyrim V codes
5.3. NPC control

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence:

1) Switch to third person view (F key).

2) We approach the desired character or monster, whom we want to move into.

3) Open the console, select the monster with a mouse click, enter the codes:

5) Player.TC- Control the main character

6) TC- Control an NPC or creature

8) Close the console.

Notes:

After gaining control over the NPC, you can only move with it and cannot attack.

If you press attack, then your main character will attack, and not the one under your control. How to make NPCs attack is unknown.

To return to the normal game and take control of your main character, type in the console:

Cheats in the game Skyrim
5.4. Companions NPCs

In Skyrim, almost any character can be made your partner so that he follows us and helps in battles. To do this, we do the following:

1) We approach the required character, open the console, click on the character. Let's start typing codes:

2) SetRelationshipRank Player 3– transfer the character to a group of possible allies.

3) AddFac 0005C84D 1- add the necessary dialogue.

4) Close the console, continue the game. We speak with the character, select the dialog that appears: “Follow me. I need your help".

SetRelationshipRank Player 3	Transfer a character to a group of possible allies
AddFac 0005C84D 1	Add NPC dialogue to add him as a partner
Set PlayerFollowerCount to 0	Adds a dialogue for taking new partners. After the introduction of this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, there are no satellites, then this command is useless. The maximum number of partners is 1. It makes no sense to enter something else instead of 0 - it will not give any effect.
Set PlayerFollowerCount to [#]	Set the number of companions. By setting "0", you can refuse all companions at once

6. Codes for completing quests

There are a lot of additional quests in Skyrim, which can take several months to complete. Quests are a chain of several tasks (quest stages). With the help of codes, you can quickly go through both individual stages of quests, and quests as a whole.

View codes from Skyrim
6.1. Quest search

How to move to the quest objective:

ShowQuestTargets- get the ID-code of the quest. (Quest IDs, after the introduction of ShowQuestTargets, are located in exactly the same sequence as in the Quest Log).

4) In the resulting list, look for Current quest: , remember this ID. (To scroll through the text in the console, press the "PageUp" and "PageDown" keys).

5) Now enter MoveToQt to teleport to the quest target.

What are the codes in Skyrim
6.2. Passage of the quest

Start Quest	Start quest
Complete Quest	Complete the quest (This command is not recommended, as you won't be able to get the next quest if it's a questline. Use only if you want to complete the quest without being able to progress further).
Reset Quest	Reset all stages of the quest, after which it can be completed again. (In order for this quest to be removed from the Quest Log, you must save and load the game).
CompleteAllObjectives	Mark all quest tasks as completed
SetObjectiveCompleted [stage] [state]	Set all tasks of the quest stage to "completed" (1) or "failed" (0)
SetObjectiveDisplayed [stage] [state]	Set the state of the tasks of the quest stage (0 - disabled, 1 - enabled)
SAQ	Start all quests in the game (may crash the game!)
CAQS	Complete all quests in the game (may crash the game!)

Complete the quest step with the code:

1) We save the game and do not overwrite this save until we complete the quest.

2) Open your list of tasks (key "J"). Select the quest you want to complete and press Enter.

3) Open the console and enter ShowQuestTargets- get the ID-code of the quest.

4) Enter GetStage. The stage of this quest will appear in the console in the following form: GetStage >> [number].00. We remember the number of the current stage of the quest.

5) Enter SQS- get a list of all stages of the specified quest in the following form Stage [stage]: 1 (or 0). 1 - means that the stage has been passed, 0 - the stage has not yet been completed. In the resulting list, we are looking for our memorized stage of the quest. Remember the number of the next step.

6) Enter SetStage [stage]- set the stage of the quest. As a stage, enter the number of the next stage.

7) Enter MoveToQt- teleportation to the target of the selected task.

We begin to independently pass the next stage of the quest.

Complete the entire quest with the code:

If you complete a quest with the CompleteQuest command, it will simply be marked as completed and you will no longer be able to continue it. At the same time, you will not receive any reward for such a quest.

To receive all the rewards for the quest, you must complete all of its component stages one by one. To do this, execute commands 6), 7) from the previous paragraph until all stages in the quest are completed. This is how you can complete any quest 100%.

7. Other codes

RPG Skyrim Cheats
7.1. Graphics and animation settings

TFC	Enable/disable free camera
TM	Enable\disable interface
TG	Enable/disable grass
FOV[#]	Change the view camera view from the first person (default: 60-90)
Set TimeScale to [#]	Set game time flow rate (20 - default, 1 - real day, 0 - stop time of day)
Set KillMoveRandom to [#]	Set the probability of finishing animation (50 - default, 100 - maximum, 0 - disable)
Set DecapitationChance to [#]	Set decapitation probability (40 - default, 100 - maximum, 0 - disable)
SW	Changes the weather
FW	Changes the weather to another random

skyrim codes
7.2. Game settings

8. Solving problems with entering codes

skyrim codes
8.1. Remove squares when entering cheat codes

It often happens that when entering codes into the Skyrim console, not letters and numbers are displayed on the screen, but empty squares. This happens because the letters of the Russian alphabet are entered, and they are not supported in the game console. There are several methods to solve this problem.

Method 1. Switching the font in the game

Press the "Scroll Lock" key to switch the alphabet right in the game. (It doesn't always work!)

Method 2. Change the font

1) Go to the folder with the game, find the file: Skyrim\Data\Interface\fontconfig.txt.

2) In the properties of this file, remove the checkmark "Read only".

3) Open the file, replace the following line:

Map "$ConsoleFont" = "Arial" Normal
on the
map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Method 3. Set the English language in the console

If for some reason you can’t remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes will work. But before that, it is imperative to change the language in the console to English:

1) Go to C:\Users\[username]\Documents\My Games\Skyrim

2) Open the Skyrim.ini file.

3) In the text of the Skyrim.ini file after the lines:

sLanguage=RUSSIAN

add (not replace) the following line:

SConsole=ENGLISH

Method 4 - Set the English Language in the Steam Client

During the game, press the key combination "Shift" + "Tab". Right click on your Steam nickname, click change language, select "EN".

If none of the methods work, and you are the owner of a non-original version of the game, then you should consider looking for another image with the game or purchase the original version.

Method 5. Set the default language to English in the OS

If it is not possible to change the input language using sConsole=ENGLISH, then you need to set the default language to English in the computer's operating system.

1) "Start" menu, line "Run ..."

2) Enter the text: control international

3) Go to the tab "Languages", "Details..."

1) Go to "Start", the line "Control Panel"

2) In the panel, select "Regional and Language Options", tab "Languages and Keyboards"

3) Select "Change keyboard..."

4) Find "Default input language" and select "English (United States)", "Ok".

1) In the lower right corner of the desktop screen, click on the inscription "RUS".

2) In the "Language Settings" menu, select "English. Keyboard layout: USA.

3) Move the selected line to the very top - press the "Up" button.

After that, the codes in Skyrim should display normally.

	Achievement "Honorary reader site" Liked the article? In gratitude, you can put a like through any social network. For you it is one click, for us it is another step up in the rating of gaming sites.
	Achievement "Honorary Sponsor Site" For those who are especially generous, there is an opportunity to transfer money to the account of the site. In this case, you can influence the choice of a new topic for an article or passage. money.yandex.ru/to/410011922382680

+ Add comment

To open the console press [ ~ ] (tilde) and enter the following cheat codes:

Main list of cheat codes

tgm - invulnerability mode
tcl - walk through walls
tmm 1 - open the world map (all points on the map)
killall - kill all (friends/enemies) in line of sight
psb - get all spells, dragon calls and talents
qqq - exit the game
advlevel - raise the level. Does not add ability points.
tfc - "free" camera mode
tdetect - theft without consequences. Turn off NPC vision. (added by Robin)
tcai - disables and enables artificial intelligence. Once cast, everyone stops fighting. (added by Robin)
set timescale to 0 - stop time. Default: 20. If you enter 10000 instead of 0, then one day will pass in a few seconds.

SexChange - change gender to the opposite. Your face won't change :)
Showracemenu - open the character creation window, where you can change: race, gender, appearance and name of the character. After changing the race, in early versions of the game, your character level will become 1. It will also reset all pumped skills. In version 1.3.10.0 of the game, after changing the race, the level of the character remains the same. Don't forget to save your game before applying this command command. (added by Robin)

player.setav invisibility 1 - enable invisibility. After that, neither enemies nor friends will notice you. To disable invisibility, enter 0 instead of 1.

player.modav carryweight X- increase the maximum carrying capacity of the character by X units
player.setav speedmult X- set movement speed X%. Applied after running while holding down the [ alt]. Default: 100%.
player.setscale X- increase the growth of your character, where X: 1 - 100%, 2 -200%, etc.
setgs fJumpHeightMin 100 - 100% jump height (default).

player.setav Health X X units
player.setav Magicka X X units
player.setav Stamina X- set max. the amount of power in X units. If set to a high value, the character will not get tired while running.

player.setav attackdamagemult N- Increase weapon damage N times (added Avenger)
player.setav leftweaponspeedmult N- increase the attack speed of the weapon in the left hand in N once
player.setav weaponspeedmult N- increase the attack speed of the weapon in the right hand and two-handed weapons in N once

player.setav LeftItemCharge N N units
player.setav RightItemCharge N N units
Notes:

all two-handed weapons are considered weapons in the right hand;
a fully loaded weapon has a charge level of about 3000;
each attack consumes about 30 units. weapon charge;
charge level can be set above 3000.

player.additem 0000000F N- get N gold
player.additem 0000000A N- get N master keys
player.placeatme 0010BF90 - Summon a Spectral Horse. Can be used indoors. (added Sam)

player.setcrimegold 0 - Remove the bounty on your head

player.addspell 00092C48 - Lycanthropy. Skill for turning into a wolf / werewolf. Appears in the "Talents" section. To activate use the [Z] key. You can't cancel the skin. The reverse transformation into a person will occur automatically, after a certain period of time.

Vampirism

player.addspell 000B8780- vampirism. Adds the Sanguinare Vampiris disease. 3 days after infection, you have a 10% chance that you will become a vampire. If after 3 days after using this code in the section "Magic" - "Active Effects" appears "Vulnerability to fire" - you are a vampire. And if nothing happened - use the command player.removespell 000B8780, after which again player.addspell 000B8780.
player.removespell 000B8780- He will be cured of vampirism, the disease "Sangvinare Vampiris", which appears at the first stage of transformation (after a bite). After turning into a vampire, this code does not work.
setstage 000EAFD5 10- recover from vampirism. Always heals, but only works once, since the healing occurs after the quest is completed (this code ends the quest). (added 216623)

If you become a vampire for the second time and code setstage does not cure

save the game (new save, not quick save);
enter resetquest 000EAFD5
create another one new save and download it;
enter setstage 000EAFD5 10

Teleportation

player.moveto(without brackets) - teleport to the specified object (character)
coc qasmoke- will move to the test location. There are all game items and devices for the manufacture of any items. (added by Robin)
coc riverwood- exit the test location, move to "Riverwood". If you enter another name instead of "riverwood", then a teleport to the specified location will occur. How to find out the names of locations for teleportation, read a little below. (added by Robin)
player.setpos [axis] [number](without brackets) - move your character to the specified coordinates. Instead of axis you must specify x,y or z. And instead numbers- offset along the selected axis.

Notes for player.setpos [axis] [number](no brackets)

To find out your current location, enter player.getpos [axis](without brackets). This command needs to be run 3 times and instead of axis take turns writing x,y and z. Then write down / remember all three received numbers.
If you know the exact coordinates to move, obtained earlier using the command player.getpos [axis](without brackets), then use the command player.setpos [axis] [number](without brackets) to move to the specified coordinates.
Don't close the console until you run the command 3 times player.setpos [axis] [number](without brackets) for each of the coordinates (x,y,z).
The move only happens after the console is closed.

How to find out the names of locations for the coc command

There are a lot of different locations in the game and I will not lay out the exact commands for teleportation, but I will tell you how to find them. And so, what needs to be done to find out the very names of locations for the team coc:

open console
enter help part_of_name_in_english 0 When entering the name of the location, there should not be spaces, and if they are, enter only the first word.
using console scroll keys [ PageUp] and [ PageDown] find the following lines (there are many):
- CELL: location_name (location id)(all this can be entered for the command coc)
now that we already know the exact name for teleportation to the required location, we enter coc location_name

player.removeallitems- clear inventory. Removes ALL items in your inventory.

prid(without brackets) - select an object by its ID. An analogue to the following action: open the console - click on the object. After this command, the inscription should appear in the console ""(Object ID). After that, you can apply all the cheats written below without selecting the object. With this cheat code, you can select a very distant object and apply the necessary action to it. For example, resurrect someone or view the contents of the inventory.

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence.

switch to "third person view" [ F] (will not work otherwise);
we approach the necessary character or monster;
open the console, click on it with the mouse and enter the following code;
player.TC
close the console.

To return to the normal game and take control of your main character, type in the console: TC and player.TC

Notes:

After gaining control over the NPC, you can only move with it and cannot attack.
If you press attack, then your main character will attack, and not the one under your control.
How to make NPCs attack is unknown. If you find a solution to this problem - write in the comments.

Companions (partners)

In Skyrim, almost any character can be made your partner, companion. To do this, do the following:

go to the required character;
open the console and click on it (highlight);
enter setrelationshiprank player 3
enter addfac 0005C84D 1

After that, this character will have a dialogue: “ Follow me. I need your help.»

set playerfollowercount to 0- adds a dialogue for taking new partners. After the introduction of this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, there are no satellites, then this command is useless. The maximum number of partners is 1. It makes no sense to enter something else instead of 0 - it will not give any effect.

Strengthening skills

All of the codes below increase one or another skill by (base value * N%). That is, if your base weapon damage is 15 units, and as the value you entered 200 , then the original damage will be (15 + 15 * 2) = 45 units. To disable modifier as value enter 0 . Exactly the same formula is used to calculate the duration of spells.

Example: player.setav DestructionPowerMod 100- increase damage from all spells of the school of destruction by 100%

OneHandedPowerMod - one-handed weapon
TwoHandedPowerMod - two-handed weapon
MarksmanPowerMod - bows
BlockPowerMod - shield
SmithingPowerMod - blacksmithing
HeavyArmorPowerMod - heavy armor
LightArmorPowerMod - light armor
PickPocketPowerMod - Pickpocketing
LockpickingPowerMod - hack
SneakPowerMod - Stealth
AlchemyPowerMod - alchemy
SpeechcraftPowerMod - eloquence
AlterationPowerMod - change
ConjurationPowerMod - sorcery
DestructionPowerMod - destruction
IllusionPowerMod - illusion
RestorationPowerMod - restoration
EnchantingPowerMod - enchantment

Note. Changes to these modifiers are displayed in the description of spells and weapons.

Remove squares when entering cheat codes

Go to the game folder and find the following file: Skyrim\Data\Interface\ fontconfig.txt. We replace the following line:

map "$ConsoleFont" = "Arial" Normal

map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Note 1. If after that the file fontconfig.txt does not want to save or offers to save a copy of this file, then do the following:

in the properties of this file, see if there is a checkmark " Only reading»;
if it's worth it, remove it, change the file, save it and check this box back.

Note 2. If for some reason you can’t remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes they will work. However, before entering the codes, it is imperative to change the language in the console to English (instructions below).

Set the English language in the console

Method 1- setting the default English language in the OS (instruction).

Method 2- changing game files
Go to C:\Users\<имя_пользователя>\Documents\My Games\ Skyrim and open the file Skyrim.ini. After the lines:

sLanguage=RUSSIAN

add (not replace) the following line

During the game, press the key combination [ Shift]+[Tab]. Right click on your nickname, click change language and choose EN.

This method will only work if you have the Steam version of the game.
After these steps, the language in the console Skyrim you will have English instead of Russian.

Note 1. For installation of English language in the console, you must follow the instructions described in one of the three methods presented.

Note 2. To set the English language in the console, use "Method 1", as it works for 90% of all players with the original version of the game. If you do not have the original version of the game or the first method did not change the language in the console, provided that you did everything correctly, try the other methods described here.

Once again, "Method 1" works almost always if you have everything in order with the game itself. If it does not work and you are the owner of a non-original version of the game, then you should think about finding another image with the game or purchase the original version.

Pumping all skills and perks

With the help of these cheat codes for Skyrim you can quickly pump all the skills and get all the perks. To do this, we need the following cheats:

advskill N X- raise a skill N on the X units of experience. The main team for pumping all skills and perks.
player.setav N X- install X skill level N. This cheat does not add "ability points", but is required when your skill level reaches 100.
player.setlevel N- set character level N(1-255). Can be used to lower a character's level after applying a cheat advskill.

List of names of all skills for teams advskill and player.setav

Usage example:
advskill Destruction 100- raise "Destruction" by 100 experience (not levels)
player.setav Block 50- set skill level 50 "Block"

Alchemy - alchemy
Alteration - change
Conjuration - sorcery
Destruction - destruction
Enchanting - enchantment
Illusion - illusion
Restoration - restoration
Marksman - Shooting
Block - block
HeavyArmor - heavy armor
LightArmor - light armor
Lockpicking - Hacking
Onehanded - one-handed weapon
Twohanded - two-handed weapon
Pickpocket - pickpocketing
Smithing - blacksmithing
Sneak - stealth
Speechcraft - eloquence

To pump all the perks of all skills, do the following (added by dova):

With the help of a cheat advskill(description above) raise any skill to level 100.
Then we apply the code player.setav [skill name] 0(without brackets) - set the level of the specified skill to 0.
Repeat steps 1 and 2 until you have upgraded all the perks.

If after that you still don’t understand how to add “ability points” to level up perks, then enter this several times (in turn):

advskill destruction 999999
player.setav Destruction 0

After these manipulations, you will receive the required number of "ability points" and will be able to spend them on pumping all available in Skyrim perks.

To change the amount of magic, lives and stamina, use the following cheats:

player.setav Health X- set max. number of lives in X units
player.setav Magicka X- set max. amount of magic X units
player.setav Stamina X- set max. amount of stock in X units.

Armor sets (sets)

To get the necessary set of armor, enter the cheat codes in the following form:
player.additem [armor_code] [amount](without brackets).

Example: player.additem 00013938 1- get 1 glass boots

0001396B - armor
0001396A - boots
000D7A8C - fire suppression boots - +50% fire resistance.
000D7A8B - Boots of Silence - Silent movement.
000D7A8A - mammoth boots - +50 pts. load capacity.
0001396D - helmet
0001396C - gloves
0001396E - shield
000D7AF9 - grounding shield - + 70% resistance to electricity.
000D7AF6 - heat shield - + 70% cold resistance.
0010DFA3 - shield of denial - + 22% magic resistance.

Draconic Shell Armor Set

00013965 - boots
00013966 - armor
00013967 - gloves
00013969 - helmet
00013968 - shield

Draconic Scale Armor Set

0001393D - boots
0001393E - armor
0001393F - gloves
00013940 - helmet
00013941 - shield

Unique armor with bonuses (added by dova)

0007C932 - "The Robe of the Archmage" (armor) - + 100% to the speed of magic recovery; all spells cost 15% less magicka
000F9904 - Scholar's Diadem (helmet) - All spells cost less magicka.
000FC5BF - Bloodlust Thrarch (Shield) - Hitting with a shield deals 3 damage. damage over 5 sec.
000E41D8 - "Shield of Ysgramor" - + 20% magic resistance; +20 pts health.
000295F3 - "Helmet of Yngol" - + 30% resistance to cold.

Accessories with bonuses

000С8911 - "Amulet of Akatosh" - + 25% to the speed of magic recovery
0002D773 - "Goldur's Amulet" - +30 units. magic, health and stamina. (added FANTOM)
00100E65 - "Necklace of immunity and diseases" - 100% immunity to diseases (added nikitadrakon)
000C891B - "Mary's Amulet" - Restoration spells cost 10% less magicka. Essential for a wedding.

Masks (helmets) with bonuses

00061CB9 - "Krosis" - + 20% to hacking, archery and alchemy skills
00061C8B - "Morokey" - + 100% to the speed of magic recovery
00061CA5 - "Nakrin" - spells of the school of destruction and restoration consume 20% less mana; +50 mana
00061CC9 - "Vokun" - spells of the school of illusion, change and witchcraft consume 20% less mana
00061CC2 - "Otar" - resistance to fire, electricity and cold increases
00061CC0 - Ragot - +70 stamina
00061CAB - Volsung - 20% discount on all products; breathing underwater; +70 load capacity
00061CC1 - "Khevnorak" - immunity to diseases and poisons
00061CCA - "Wooden Mask" (added by dova)
00061CD6 - "Konarik" - When health is low, gives a chance to heal the wearer and deal damage to nearby enemies. (added dova)

Weapon sets

To get the necessary weapon, enter the cheat codes in the following form:
player.additem [weapon_code] [amount](without brackets).

Example: player.additem 000139A8 1- get 1 glass bow

Daedric Artifact IDs, which are below, must be used in the cheat code as follows:
(without brackets).

Example: player.additem 000240D2 1- get 1 dagger "Razor of Mehrunes"

Weapon

With a cheat code psb"we get all the spells, cries of dragons and talents ”or add only the necessary shouts using the cheat:

player.teachword- learn shout (list of all shout IDs below)
Example: player.teachword20e17- learn the first words of the shout "Fire Breath"

To learn the 3 word of the dragon's cry, you first need to learn 1 and 2, it will not work in another way. To learn "Iceform" level 3, you must enter the following:

player.teachword 602A3- first word
player.teachword 602A4- second
player.teachword 602A5- third

Dragon Shout IDs for Code player.teachword(no brackets)
first word / second / third - the name of the cry(use only 1 of 3)

46B89 / 46B8A / 46B8B - Dragon's Call
13E22 / 13E23 / 13E24 - Unrelenting Force
602A3 / 602A4 / 602A5 - Ice mold
6029A / 6029B / 6029C - Thunder Call
20E17 / 20E18 / 20E19 - Fire Breath
48ACA / 48ACB / 48ACC - Time dilation
2F7BB / 2F7BC / 2F7BD - Swift Charge
60291 / 60292 / 60293 - Friendship with animals
3291D / 3291E / 3291F - Elemental Rage
32917 / 32918 / 32919 - Ethereal
5D16C / 5D16D / 5D16E - Frost Breath
602A0 / 602A1 / 602A2 - Voice cast
5FB95 / 5FB96 / 5FB97 - Disarmament
3CD31 / 3DC32 / 3CD33 - Clear Sky
51960 / 51961 / 51962 - Call of Valor
44251 / 44252 / 44253 - Dragonslayer
60297 / 60298 / 60299 - Death sentence
60294 / 60295 / 60296 - Aura Whisper
6029D / 6029E / 6029F - Kin World
3291A / 3291B / 3291C - Fright

Shouts DLC Dawnguard

02008A65 / 02008A64 / 02008A63 - Life Drain
020030D4 / 020030D6 / 020030D7 - Calling Durnevir
02007CB7 / 02007CB8 / 02007CB9 - Soul Rip
0201A162 / 0201A163 / 0201A164 - Call from Soul Cairn

Shouts DLC Dragonborn

040200E4 / 040200E5 / 040200E6 - Battle Fury
040179D9 / 040179DA / 040179DB - Submission of will
040200C2 / 040200C3 / 040200C4 - Cyclone
0401DF93 / 0401DF94 / 0401DF95 - Dragon Incarnate

To use Dragon Shouts First you need to activate them with Soul of dragons. That is, kill the dragon or add the required amount using the cheat:

player.modav dragonsouls N- get N soul of dragons. This cheat sets the total number of dragon souls consumed, and does not add N PCS.

For activation of dragon cries press [ Tab] -- Magic -- screams-- select the necessary shout that you want to activate -- press [ R] -- Ok. Now you can use this shout.

player.setav shoutrecoverymult 0- Dragon Shouts have no cooldown, cooldown to reuse. If you entered this code after using cry, then it will be necessary to wait until it recovers, after which it will be possible to use this shout all the time without waiting for it to recover.

Ingredients, Soul Stones, Potions, Arrows

To get the required item, whose IDs are below, you must use the cheat code in the following form:
player.additem [number](without brackets).

Example: player.additem 00039BE5 10- get 10 potions of full health restoration

00039BE5 - fully restores health
00039BE7 - fully restores magic
00039CF3 - fully restores stamina
00073F34 - "Deadly Poison" - 65 units. poison damage
00039D12 - Enchanter's Elixir
00039967 - "Blacksmith's Elixir"

Soul Stones

0002E4F4 - large (empty)
0002E4FB - large (Large)
0002E4FC - great (empty)
0002E4FF - great (Great)
0002E500 - black (blank)
0002E504 - black (Great)
00063B27 - Star of Azura (blank)
00063B29 - Azura's Black Star (blank)

Arrows

00038341 - Falmer
00034182 - ancient nordic
000236DD - dart (can only be obtained after completing the main storyline)
00020F02 - rusty iron
00020DDF - iron
000139C0 - Daedric
000139BF - ebonite
000139BE - glass
000139BD - elven
000139BC - Dwemer
000139BB - orcs
0001397F - steel

Full list of ingredients Skyrim you will find .

Treasure chests

Each of the chests contains all the items of its class. For example, a stave chest contains ALL staves, while an ingredient chest contains ALL ingredients. To get these treasure chests, use the following cheat codes for Skyrim:
player.placeatme(no brackets)

Example: player.placeatme 000C2CDE- get a chest with all staves

000C2CDF - enchanted weapon
000C2CD7 - enchanted armor, jewelry, mage and rogue clothes
000C2CE0 - standard weapon
000C2CD6 - standard armor
000C2CDE - staves
000C2CD8 - armor and jewelry, clothes for a mage and a robber
0010D9FF - skill books
000C2CD9 - spell books
000C2D3B - regular books
000C2CD4 - arrows
000C2CDA - ingredients
000C2CDB - keys
000C2CE1 - spell scrolls
000C2CE2 - potions, elixirs and tinctures

Notes:

After opening some chests (with enchanted weapons and armor), Skyrim freezes for 30-60 seconds. (depending on the power of your CPU). Wait a while and everything will be fine.
If, after opening a chest with an enchanted weapon/armor, instead of any one item, press [ R] (take all), then the duration of the freeze will be reduced several times.
Chests contain all the items of their class - there are a lot of things.
Each chest contains only 1 copy of each item. If you want to make a lot of such items (ingredients) - find out its ID of the item (read how to do it below) and create the required number of these things using the cheat player.additem ID number

Passage of quests

To complete quests in Skyrim we need the following cheat codes:

showquesttargets- shows ID of active quest
getstage(without brackets) - shows the stage of completion of the specified quest (the resulting number is not % completed).
setstage [stage](without brackets) - set the stage of execution
movetoqt(without brackets) - teleportation to the key point (the last unfinished stage) of the specified task. (added by Robin)
sqs(without brackets) - show a list of all stages of the active quest (they are different for each quest). Used in cheat setstage.
resetquest(without brackets) - reset all stages of the quest, after which it will be possible to go through it again. In order for this quest to be removed from the Quest Log, you must save and load the game.
player.completequest(without brackets) - complete the quest. This command is not recommended., since you won't be able to get the next quest if it's a quest chain. Use only if you want to complete the quest without the possibility of further progress.

And so, all the necessary console commands, for the successful completion of quests in Skyrim, we already know, but what and why to enter - no. Since we will perform all actions in the console, I want to remind you that to scroll the text in the console, you must use the keys [ PageUp] and [ PageDown]. The method written below describes how to move from one stage of the quest to another.

Save the game and do not overwrite this save until you complete the quest.
Open your task list (key [ J])
Select the required quest you want to complete and make it active - press [ Enter].
Open the console and enter showquesttargets- we get Quest ID.
In the resulting list, we are looking for Current quest: Quest ID -- remember/write down this ID.
Now we enter movetoqt quest ID and try to complete the quest in the usual way, without the console, and if nothing comes out, read on.
Enter in console getstage quest ID After that, the stage of completing this quest will appear in the console in the following form: GetStage >> [number].00 -- memorize / write down this number.Now we need to find out what stage of the quest comes after this one obtained using the command getstage.
Enter in console sqs(without brackets) - we get a list of all stages of the specified quest (for each quest they are different) in the following form Stage [stage]: 1(or 0). 1 - indicates that this stage already passed, and 0 - not yet.
In the resulting list, we are looking for our quest stage, obtained using the command getstage, and look at what stage comes after it - remember / write down the number. For example, if using getstage You received GetStage >> 400.00, and in the list obtained using the code sqs, after the line Stage 400: 1 there is a line Stage 450: 0- memorize / write down the number 450 .
Enter in console setstage [stage](without brackets) - set the stage of the quest. As a stage, we enter the number obtained in the previous paragraph (we have this 450 ), and as the quest ID - the ID obtained using the cheat showquesttargets.
Enter movetoqt(without brackets) - teleportation to the target of the active task.
We continue to pass the next stage of the quest.

Notes:

If nothing worked the first time, repeat the steps 9 and 10 several times, but change stage- enter the next in the list obtained using the command sqs(without brackets).
If you repeat the points 9 and 10 , while changing stage quest (all in turn) from the one received using the command sqs(without brackets) to the last in the list sqs(without brackets), then you will complete all the stages of this quest and will move from one key point to another. The move will not always happen. That's how you can complete any quest 100%.
It is not necessary to go exactly to the next stage of the quest, you can go directly to the last one, but in this case you may not receive the next quest, since you will not have an active quest or a point for teleportation by the command movetoqt- you won't know where to get it (next quest).
If you go directly to last stage, then you may not get all the rewards for this quest (not tested).
You cannot activate the previous stage of the quest (I did not succeed).

How to find out the name of a quest by its ID

Method 1- the fastest, but may not work if you have some mods or unofficial add-ons installed.

Go to this page and enter the name of the quest in the appropriate search form.

Method 2- slow, but always works with any version of the game.

If after entering the command showquesttargets you have multiple lines Current quest: Quest ID and you do not know which of these IDs corresponds to this or that quest - do the following:

type in console help quest ID 4
in the resulting list look for the string QUST: quest ID (some ID) "Quest name"
repeat steps 1 and 2 until you find the quest you need by its name.

Quest IDs, after introduction showquesttargets, are located in exactly the same sequence as in the "Job Log". That is, if in the "Journal of tasks" at the very top of the list you have the quest "It's restless in Skyrim", and after it comes "Cleaning", then they will be in exactly the same sequence after entering the command showquesttargets. This will help make it even faster to sort through all the quest IDs, since you will approximately know which ID to start searching for the quest you need.

How to find the ID of an item

If you have some unique item and want to make a lot of such items (clone) or want to "send" this item to your friend, but don't know how to do it. To do this, we need to know the ID of this item.

Method 1
In the console enter: player.showinventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In such cases, use the second method.

Method 2(added Avenger)
We put the item whose ID you need to find out in an empty box (barrel, chest, bag or something else). We approach the box as close as possible (preferably sit down) - open the console - click on the box (in which our item lies) and enter the command inv.

Notes:

This method may not always work, because when you click on a box with an item, the box itself is not always selected, very often it is not clear what is highlighted.
If you cannot find the item ID using this method, use the first method.
With this method, you can see list of all other character's items. To do this, instead of clicking on the box, click on the required character.

After that, a list of all items in your inventory or box will appear (if you entered the command inv) in the following form:
quantity - name (item ID)

To scroll through the text in the console, if there is a lot of it, use the [ Page Up] and [ Page Down].

We are looking for the necessary item by name and look Item ID
Now, to make a lot of such items (clone), we enter the following code:

player.additem [number](no brackets)

Housing

Many of you have your own home or a place where you like to spend time, but when you need to create some thing (armor, weapon), improve something or create a new elixir, you have to look for special devices to create it, because without no way. With the help of these codes for Skyrim, you can create your own workplace, install all the devices you need, anywhere and anytime. To install all these crafting machines, use the following code to Skyrim:
player.placeatme(without brackets) - set item

Example: player.placeatme 000BBCF1- install sky forge

000BAD0D - pentagram of souls (large)
000D5501 - pentagram of souls (small)
000BAD0C - alchemy laboratory (large)
000D54FF - alchemy laboratory (small)
000727A1 - leather tanning machine
0006E9C2 - whetstone
000BF9E1 - forge (large)
000BBCF1 - sky forge (very large)
0001A2AD - anvil
0009C6CE - smelter
000D932F - workbench

Home furniture

00089A85 - mannequin

single door: CC16A, CC163
CC164 - double door

decorative items

B2456 - dragon head
3FA65 - elk antlers
D9285 - crab
D9276 - goat's head
3858F - fish
moose head: DD9E0, DD9E1, CF264
big cat head: D928F, D928D
wolf head: D9289, D9288
the head of some animal: D9287, D927D
bear head: D8282, D9281, D927F

carpets (square): 93D39, 93D3B, 93D3D, 93D3F, 93D41, 93D43, 93D45, 93D47, B7E3E, B7E40, BF9CF, BF9D1, BF9D3, BF9D5
carpets (round): 95498, 954A3, 954A4, 954A5
animal skins: 5C015, 5C016, 5C017

7EA42 - wall burning candles
1F24A - table candle
5AD5B - ceiling light

77761 - light source(invisible, cannot be selected/moved/deleted after installation) for illuminating dark rooms. To install multiple lights at the same time, use player.placeatme 77761 N- install N light sources. Instead of N write any number from 1 before 10 . If you write more 10 - Nothing will happen.
blue light source: FFF46, FFF48

Notes:

When created, all items appear in front of you.
To set the item "flat" before introducing the cheat, center your gaze so that your character is looking straight ahead, not up or down.

activate(without brackets) - activate the specified item. Key analog [ E]. Applied to mannequins (clothe) and bookshelves(close/open).

For the following commands to work, you must first select the object - open the console and click on the object. After that, an inscription should appear in the middle of the console screen ""(Object ID). All the objects you create have an ID that starts with FF000..., so watch what you highlight.

Mannequin Codes

With the help of these cheat codes to Skyrim you can enchant (improve) any weapon, armor or jewelry. Before you begin the improvement process, you need to know the following:

you can improve only the item that does not have any improvements;
each item can have no more than 2 enchantments;
the quality (strength) of enchantment depends on the Enchantment skill;
before enchanting, it is recommended to upgrade the “Enchanting” skill to 100 along with its perks (read how to do this in the “Leveling all skills and perks” section);
after entering the code for enchantment (improvement), the specified item will appear in your inventory, that is, a new item will be added, and the item in the inventory will not be improved;
after enchanting (improving) a weapon, it will have a very small charge (170-350);
to increase the charge, equip the necessary weapon whose charge you want to increase, and apply the following cheat codes:
- player.setav LeftitemCharge N- load the weapon in the left hand on N charges
- player.setav RightitemCharge N- load the weapon in the right hand on N charges
list of ID of all items you can find

player.moveto (no brackets)- teleport to the specified object (character)

coc qasmoke- will move to the test location. There are all game items and devices for the manufacture of any items.

coc riverwood- exit the test location, move to "Riverwood". If you enter another name instead of "riverwood", then a teleport to the specified location will occur.

player.setpos [axis] [number] (no brackets)- move your character to the specified coordinates. Instead of an axis, you must specify x,y or z. And instead of a number - an offset along the selected axis.

Notes for player.setpos [axis] [number] (no brackets)

To find out your current location, type player.getpos [axis] (without parentheses). This command must be executed 3 times and instead of the axis, write x, y and z in turn. Then write down / remember all three received numbers.

If you know the exact coordinates to move, obtained earlier with the player.getpos [axis] command (without brackets), then use the player.setpos [axis] [number] command (without brackets) to move to the specified coordinates.

Do not close the console until you use the player.setpos [axis] [number] command (without brackets) 3 times for each of the coordinates (x,y,z).

The move only happens after the console is closed.

player.removeallitems- clear inventory. Removes ALL items in your inventory.

prid (without brackets) - select an object by its ID. An analogue to the following action: open the console - click on the object. After this command, the inscription “(object ID)” should appear in the console. After that, you can apply all the cheats written below without selecting the object. With this cheat code, you can select a very distant object and apply the necessary action to it. For example, resurrect someone or view the contents of the inventory.

This page presents full list the most useful codes and cheats in Skyrim that you may need to fix bugs or if you really want to ruin your game.

Basic information

1. Console call. The console for entering codes is opened by clicking on the "~" (aka "tilde") key, located next to the "ESC" and "1" keys.

2. Where to enter? After calling the console in the lower left corner, you will see a window for entering characters.

3. Scroll. The console scrolls up and down with "Page Up"/"Page Down".

4. Register. All code in the console is not case sensitive.

5. Goals. Many commands must be used by first clicking on the target with the mouse. For example, if you want to open a door, go to the console, click on the door and type "Unlock".

Incorrect use of console commands

Please note that thoughtless use of the console may cause the game to crash. Before using the code, make sure you have made a save and know what you are doing.

List of console commands

If the command requires an argument, then the parentheses indicate that the content is to be replaced by the value of the corresponding destination.

Abbreviations Used

Quantity - quantity;
Identifier - ID.

Switches

Team	Action	Note
animcam	Enable Animation Camera	Includes a third-person camera that can be rotated and zoomed in on the character without changing their position.
psb	Issue a spell book to the player	Gives the player a complete spell book, including dragon cries and bestial abilities. Souls will still be required for screams. May cause crashes in the game.
s1st	Show first person camera in third person game mode	Works only in third person mode. Shows hands behind the character's back. That is, you control a character from a third person, but the hands imitate the game from the first person, as if you are controlling a character that controls another character.
sucsm<число>	Change camera speed in free mode	For example, you can type "tfc" in the console, and then "sucsm 50", thereby increasing the speed by five times
tai	Enable/Disable AI	Turns off and on the artificial intelligence of the selected character or creature. If no target is selected, AI will be disabled globally.
tc	Transfer control of the creature to the player	Grants the ability to control the selected creature. The player's character also responds to keyboard commands, unless previously disabled.
tcai	Toggle combat AI	Turns on and off the artificial intelligence responsible for combat.
tcl	Toggle Collisions	Disables the interaction of the player with the objects of the world around him when he moves. Essentially, you can fly.
tdetect	Toggle detection	Toggles the detection of the player character by other characters, even if the player character is attacking them, toggles on and off.
theofis	Relax graphics and improve performance	Disables blur, contrast adjustment, and more. Gives a big performance bonus for weak video cards by lowering the graphics level.
tfc<1>	Enable freecam mode	Allows the player to hover over the character using the keyboard in third person mode. Addendum<1>to the tfc code "freezes" the world around it, but still allows the camera to move.
tfow	Toggle fog of war	Shows unexplored places on the local map. Does not affect the global map. If you use this cheat while chopping a tree or mining ore, you run the risk of running into a bug with the disappearance of the character. Don't forget to save before using.
tg	switch grass	Shows and removes the grass.
tgm	Enable god mode	When using this cheat, the player's character does not receive any damage, does not spend magic and stamina, does not need to recharge dragon cries, does not waste arrows. However, god mode does not protect against diseases and scripted damage.
Tim	Enable immortality mode	The player character does not die when his health drops to zero.
tll	Toggle LOD	Significantly reduces the draw distance, allowing you to solve certain performance problems.
tm	Toggle menu (UI)	Turns off and on the user interface elements, including the console itself. To turn the interface back on, press "~" and, despite the fact that you will not see the console itself, type "tm" and press "Enter".
tmm<кол-во>(,<кол-во>,<кол-во>)	Hide/show all markers on the map	At<кол-ве>equal to 1 shows all markers, with<кол-ве>set to 0 hides all markers. The second parameter determines whether fast travel will be available to the marker. The third parameter shows the hidden markers. For example, to open all locations without the ability to fast travel to them, enter tmm 1,0,0.
ts	switch sky	Turns the sky display on and off.
tscr	Toggle script execution	Enables and disables global script execution.
tt	switch trees	Turns the display of trees on and off.
twf	Toggle grid	Turns the grid display on and off.
tws	switch water	Turns the display of the water surface on and off. The underwater world remains unchanged.

Goal Teams

Team	Action	Note
additem <кол-во> <доп. опция>	Add a certain number of items to the character.	Adds the specified number of items to the inventory of the selected character or player. For example, the command player.additem 000669A5 5 will add 5 bulbs to the player. The same command can be used to remove items from the inventory by entering a negative number in the field<кол-во>. Additional field <доп. опция >, most likely, is responsible for the belonging of the item to a particular character.
addperk	Add Perk	Adds a certain perk to the character. For example, player.addperk 000c44c0 will add the perk "adept of destruction".
addspell	Add the specified spell to the player's spell list	Works with special abilities, spells, blessings, diseases, but not with dragon cries. Example: player.addspell 00092c48.
addfac/addtofaction <ранг>	Add a character to a specific organization	When used, assigns the character to the organization with the specified rank
advlevel	Level Up	Increases the level of the character, at the same time increasing the strength of opponents due to auto-leveling.
AdvSkill<навык> <количество>	Increase the experience points of the specified skill	The skill itself does not increase, the number of experience points increases.
completequest	Complete the quest immediately	Sets the status of the current job to completed. Be especially careful when using this command, as it only ends the quest in the quest log, it does not affect scripts and many other data.
DamageActorValue<атрибут> <кол-во>	Corrupt attribute to specified<кол-во>points	For example, player.damageactorvalue health 50 will take away 50 health points from your character like he was under attack.
disable	Do not render the specified object	The selected object disappears from the game world. It also works on characters.
dispelallspells	Dispel all temporary effects of the target	For example, player.dispelallspells will remove from your character all possible effects from potions, spells, special abilities.
drop	Force drop items from the character's inventory	Use code Drop <кол-во>, to discard certain (including quest) items from the inventory.
duplicateallites<контейнер/ID персонажа>	Copy all items from the selected container to the specified container	For example, duplicateallitems 89c79 will copy all the items in the container you selected into container 89c79.
enable	Render the specified object	The selected object appears in the game world. It also works on characters.
equipitem	Equip the specified item on the selected character	The selected character puts on and begins to use the specified item.
forceAV<атрибут> <кол-во>	Change attribute value	Forces an attribute to a specific value. Similar commands: setAV, modAV.
getAV<атрибут>	Get attribute value	Returns the value of the specified attribute for the selected character.
getAVinfo<атрибут>	Get numerical information about an attribute	To get information about light armor, enter the cheat code player.getavinfo lightarmor.
getlevel<цель>	Show target level	Shows the current level of the selected character or creature.
GetLocationCleared	Show location status	0 - location not cleared, 1 - cleared.
getrelationshiprank<цель>	Show the relationship level of two characters	The value can range from -3 to +4.
getstage	Show the current active stage of the quest.	Returns the highest completed quest stage of the specified quest.
hasperk	Check if the selected character has the specified perk	Example: hasperk 3af84.
incPCS<название скилла>	Increase the specified skill by one level	Example: incpcs lightarmor.
kill<опционально: ID персонажа>	Kill the specified character	Select the desired character and type "kill" in the console to kill him. Resurrection is performed by the "resurrect" command.
lock<уровень>	Lock the selected container with the lock of the specified level	0 - 25: student, 26 - 50: specialist, 51 - 75: expert, 76 - 100: master, 101+: locked.
Mark For Delete	Delete object	Completely deletes the selected object.
modAV<атрибут> <кол-во>	Change attribute to specified amount	Adds the specified amount to the attribute's value.
move to	Move the selected character to the specified character	player.placeatme creates a clone of the character.
movetoqt	Move character to quest objective	Example: movetoqt da01.
openactorcontainer 1	Open Character Inventory	This cheat code in Skyrim allows you to view and use the inventories of other characters.
paycrimegold<0-1> <0-1>	Pay a fine in the selected property	First argument: 1 - you will move to the prison after entering the code, 0 - do not move. Second argument: 1 - you stole the items, 0 - you didn't steal the items. Stolen items will be lost. Faction Codes: 00028170 - Falkreath 000267E3 - Eastmarch (Windhelm) 00029DB0 - Haaingar (Solitude) 0002816D - Hjaalmarch (Morphal) 0002816e - White Coast (Donstar) 0002816C - Limit (Markarth) 0002816B - Rift (Riften) 000267EA - Whiterun 0002816F - Winterhold xx018279 - Raven Rock (Solstheim)
placeatme	Place an actor or object at the current location	Example: player.placeatme 000fea9b.
playidle	Play the specified animation on the selected character	Example: playidle IdleOffsetArmsCrossedStart.
pushactor away <направление>	Move the character to a given point	Example: pushactoraway 14 1337. Specifying a negative value in the direction field will move the specified character to your location.
recyclingactor<ссылка на пункт назначения (опционально)>	Reset character/item	Used to "revive" dead characters and removed items.
removeallitems	Remove all items from the character's inventory	Use player.removeallitems to remove all items from your inventory.
removeitem <кол-во>	Remove a specific item in the specified quantity	Team player.removeitem 000669A5 5 will remove 5 leeks from your inventory.
removeperk	Remove a specific perk from the specified character	Example: player.removeperk 000babe8 will remove the first level Barbarian perk.
removespell	Remove a spell, effect, ability (but not a dragon cry) from the selected character	Example: player.removespell 00092c48 will remove the "Beast Form" ability from the player's character.
resetAI	Turn off character AI	Forcefully turns off the character's artificial intelligence. An opponent "off" in this way will then draw the weapon from its sheath again and select a priority target.
resethealth	Fully restore character's health	Team player.resethealth will fully restore your character's health.
reset inventory	Reload container content	Sequential Command Execution removeallitems and reset inventory will return the contents of the character's inventory to its original state.
RestoreActorValue<атрибут> <кол-во>	Restore the value of an attribute by the specified number of points	Example: if your health is damaged by 50 points, then the command player.restoreactorvalue health 100 fully restores the health of the character.
resurrect<1>	Resurrect the selected actor	Resurrects the selected character from the dead. If he was killed during the quest, then the game may consider him still dead. Adding one allows you to save the character's equipment.
setactoralpha<0-100>	Change the transparency of the selected character	Helps with graphical bugs related to character transparency.
setAV<атрибут> <кол-во>	Set attribute to specified value	Hardcodes the specified value to the specified attribute (tautology-c).
setessential <1/0>	Make a character immortal/mortal	By specifying the immortality parameter "1", you will prevent the possibility of the death of the character. After receiving maximum damage, he will continue to live.
setgs<настройка> <значение>	Set game option in Skyrim	Not passed to save. For example, to set the jump height for the player character, you will have to enter the command into the console every time setgs fJumpHeightMin<высота> .
setlevel A B C D	Set NPC Level	Type in console SetLevel 1000,0,1,81 so that the character evolves along with the player's character from level 1 to level 81. — percentage of the level to the main character (1000=100.0%) - shows how much the character is above or below the level of your character. - The base level of an NPC. - the maximum level of an NPC to which he can develop.
SetLocationCleared 1	Clear the weather in the specified area	All you need is to know the location ID.
setnpcweight<0-100> (snpcw)	Set new character weight	Affects the character model according to the given weight. Range is 0 to 100.
setownership	Assign the selected item to the owner	The command can be used to fix issues with stolen items.
setrace<раса>	Change character race	Races available in Skyrim: (normal/vampire) ArgonianRace - ArgonianRaceVampire Breton Race - Breton Race Vampire DarkElfRace - DarkElfRaceVampire HighElfRace - HighElfRaceVampire ImperialRace - ImperialRaceVampire KhajiitRace-KhajiitRaceVampire NordRace-NordRaceVampire OrcRace - OrcRaceVampire RedguardRace - RedguardRaceVampire WoodElfRace - WoodElfRaceVampire
setrelationshiprank<цель><#>	Establish a relationship between two characters	Minimum value: -4, maximum: +3.
setscale<#>	Resize Target	You cannot change the size of an item. Small Size: 0.1, Normal: 1, Max: 10.
setstage <стадия #>	Set the current stage of a job	Command example: setstage ms01 100.
setunconscious<целое число>	Make the target unconscious	To "knock out" a character, enter setunconscious 1.
inv/showinventory	Show item IDs in inventory	Shows the IDs of the items in the character's inventory.
shp<параметр #1-параметр #9>	Change image rendering options	Command example: shp 1.00 0 0.50 0.01 9.00 .1 .99 100 1.0000.
sifh<#>	Set friendly-fire for the character	Selecting a value of "1" will allow the selected character to avoid an ally's attacks.
sqs	Show quest stage	Shows the stage of the specified quest.
str<0-1.000000>	Set reflection option for selected target	0.000001 is the minimum, 1.000000 is the maximum.
teachword<слово>	Learn the word of power	Allows you to learn the specified word of power.
unequipment	Remove the specified item from the selected character	The selected character removes the specified item.
unlock	Open selected object	It also works on containers and doors locked with special keys.
unlock word<слово>	Unlock Dragon Shout	Unlocks a new level of Dragon Shout.

Teams without target selection

Team	Action
bat	Open the file in the installation folder with the game.
caqs	Complete all quest stages
coc<название ячейки>	Move to the specified cell
cow<локация>	Move to the specified coordinate
csb	Clear Screen Blood
fov<угол>	Set camera angle in first person
fw	Change the weather
GetGlobalValue<переменная>	Get the value of a global variable
GetInCellParam	Check the location of an object in a specific location
GetPCMiscStat<статистика>	Return the value of a specific statistic
help<текст>	Return IDs for skills, spells, etc.
killallactors	Kill all characters
load<имя>	Load specified Skyrim save
ModPCMiscStat<статистика> <кол-во>	Set the value of a specific statistic
pcb	Clear the memory buffer for the current cell
playercreatepotion	Create a potion with the three indicated effects
playerenchantobject	Create an item with three specified enchantments
prid	Show object ID for subsequent operations
qqq	Quick exit from Skyrim
resetinterior	Reload the specified interior
refini	Reset all settings
resetquest	Reset quest
saq	Start all quests
save<имя>	Save the game with the specified name
saveini	Save settings to file
set<глобальная переменная>to<значение>	Set the value of a global variable in Skyrim
setplayerrace	Set playable race
set playeranimalcount to<кол-во>	Set the number of creature companions for the player
set playerfollowercount to<кол-во>	Set the number of satellites for the player
set timescale to<кол-во>	Set the speed of time
sexchange	Change the gender of the player character
SGTM	Set the duration of special effects
ShowGlobalVars	Show current global variables
ShowMessage	Show message ID
showracemenu	Open character creation menu
showracemenu<раса>	Change the race of the player character
sqo	Show a list of active and completed quests
sqt	Show quest IDs and objectives

How to remove squares when entering commands in the console

How to enable English in the console

Skyrim basic cheats

Actions with NPCs (characters)

Managing NPCs (characters) in Skyrim

Skill upgrade

Leveling all skills

ID of armor sets (sets)

ID of unique armor and accessories with bonuses

Weapon Set IDs

ID of a unique weapon with bonuses

Daedra Artifact IDs

dragon screams

IDs of ingredients, potions, soul gems and arrows

Treasure Chest IDs

Completing quests

skyrim codes 1.2. The main characteristics of the hero

Codes in the game Skyrim 1.3. Character Skills

Codes in the game Skyrim1.4. Character Perks

Skirim codes 1.5. Increase damage from weapons, spells

Cheats from Skyrim 1.6. The screams of dragons

TES 5: Skyrim Cheats 1.7. Healing from diseases

2. Codes for getting items

TES V: Skyrim codes 2.1. Standard inventory management commands

skyrim 5 cheats 2.2. Codes for gold

The Elder Scrolls V codes 2.3. Armor sets (sets)

The Elder Scrolls 5 codes 2.4. Weapon sets

Cheats for the game Skyrim 2.5. Accessories

Cheats Skyrim 2.6. Consumables: Ingredients, Soul Stones, Potions, Arrows

Cheats from the game Skyrim 52.7. Treasure chests

Skyrim cheat codes 2.8. Enchanting (upgrading) weapons and armor

skyrim cheat codes2.9. Legendary weapons and armor

TES V: Skyrim codes 2.10. How to find the ID of an item

3. Codes for placing objects

Skyrim cheats and codes 3.1. Determining the object code

skyrim console commands3.2. Placement of objects

Cheats from Skyrim 3.3. Objects for home

4. Codes for fast travel

5. Codes for friendly characters (NPCs)

skyrim codes 5.1. Stop fight with NPC

Skyrim cheat codes5.2. NPC customization

Skyrim V codes 5.3. NPC control

Cheats in the game Skyrim 5.4. Companions NPCs

6. Codes for completing quests

View codes from Skyrim6.1. Quest search

What are the codes in Skyrim6.2. Passage of the quest

7. Other codes

RPG Skyrim Cheats 7.1. Graphics and animation settings

skyrim codes 7.2. Game settings

8. Solving problems with entering codes

skyrim codes 8.1. Remove squares when entering cheat codes

Main list of cheat codes

Vampirism

Teleportation

How to find out the names of locations for the coc command

Companions (partners)

Strengthening skills

Remove squares when entering cheat codes

Set the English language in the console

Pumping all skills and perks

Armor sets (sets)

Weapon sets

Shouts DLC Dawnguard

Shouts DLC Dragonborn

Ingredients, Soul Stones, Potions, Arrows

Treasure chests

Passage of quests

How to find out the name of a quest by its ID

How to find the ID of an item

Housing

Basic information

Incorrect use of console commands

List of console commands

Abbreviations Used

Switches

Goal Teams

Teams without target selection

skyrim codes
1.2. The main characteristics of the hero

Codes in the game Skyrim
1.3. Character Skills

Codes in the game Skyrim
1.4. Character Perks

Skirim codes
1.5. Increase damage from weapons, spells

Cheats from Skyrim
1.6. The screams of dragons

TES 5: Skyrim Cheats
1.7. Healing from diseases

TES V: Skyrim codes
2.1. Standard inventory management commands

skyrim 5 cheats
2.2. Codes for gold

The Elder Scrolls V codes
2.3. Armor sets (sets)

The Elder Scrolls 5 codes
2.4. Weapon sets

Cheats for the game Skyrim
2.5. Accessories

Cheats Skyrim
2.6. Consumables: Ingredients, Soul Stones, Potions, Arrows

Cheats from the game Skyrim 5
2.7. Treasure chests

Skyrim cheat codes
2.8. Enchanting (upgrading) weapons and armor

skyrim cheat codes
2.9. Legendary weapons and armor

TES V: Skyrim codes
2.10. How to find the ID of an item

Skyrim cheats and codes
3.1. Determining the object code

skyrim console commands
3.2. Placement of objects

Cheats from Skyrim
3.3. Objects for home

skyrim codes
5.1. Stop fight with NPC

Skyrim cheat codes
5.2. NPC customization

Skyrim V codes
5.3. NPC control

Cheats in the game Skyrim
5.4. Companions NPCs

View codes from Skyrim
6.1. Quest search

What are the codes in Skyrim
6.2. Passage of the quest

RPG Skyrim Cheats
7.1. Graphics and animation settings

skyrim codes
7.2. Game settings

skyrim codes
8.1. Remove squares when entering cheat codes