How to properly charge a gas lighter. How to properly refuel a gas lighter. How to fill a lighter with gas from a can. Species and types

30.03.2020

When a combustible substance runs out in a lighter, questions immediately arise about replacing the item. Just do not rush, because first you should think about how to fill the lighter with gas or other combustible substance.

Security measures

Before direct work, you should think about your safety, as well as about the people and objects around you. To do this, you should pay attention to some nuances and rules.

Safety:

Well ventilated area. When the lighter is filled with gas or other substance, it may leak. In this case, it is necessary to ventilate the room as soon as possible.

No fire or sources of ignition.

Skin and eye protection. It is better to wear closed clothes, and gloves on your hands.

Do not use the entire space of the lighter. The gas in it is under pressure, so overfilling can lead to an explosion.

Refueling with a gas bottle

When a safe place to work is prepared, skin and eyes are safe, you can start talking about how to fill a lighter with gas. Actually, there won't be big problems. It is also worth saying a few words about the convenience during work, as well as the absence of objects that can interfere with the process.

There is a special valve on the back of the lighter, which, in fact, is designed for this process. It is also worth noting the fact that it can be clogged with various garbage from the pocket. Therefore, it needs to be cleaned. It is advisable to use a sharp object. It is necessary to press this valve until a characteristic sound appears, indicating the release of gas.

Now it remains to pick up a can of gas and proceed to direct refueling. It is worth mentioning right away the fact that there are different valves, so you must first select the appropriate adapter. These items come with all cans.

Now a few words about how to properly fill lighters with gas from a technical point of view. During the process, the lighter must be in such a position that the valve is at the top. Accordingly, the gas cylinder - outlet down. After making sure of this, it is necessary to press on the lighter and hold for no more than 7-10 seconds. During this time, it will be filled. In no case should you check the item immediately after refueling. 3-4 minutes is enough for the pressure in it to normalize.

Refueling disposable lighters

Most people believe that disposable lighters cannot be refilled with canned gas. It's just that it's actually a little different. It is possible to do this, but with some difficulty. Therefore, it is worth touching on the topic of how to fill a lighter with gas through the outlet.

To begin with, the refillable item must be placed in the refrigerator for a short time. After that, put two matches into the outlet, where the front of the lever is located. Now you can start refueling, as with a lighter with a special valve.

Refueling a petrol lighter

This type of lighter is the most expensive and original, so many people often encounter direct refueling of these assistants in getting fire. Above there was a conversation about how to refuel a lighter with gas, and now it’s worth mentioning refueling with gasoline.

It is worth paying attention to what is currently available a large number of types of petrol lighters. Therefore, "reanimating" your assistant, you have to think a little. Now we will consider this process using the example of the most common mechanism - Zippo ("Zippo").

These lighters consist of a body and an inner part. To refuel Zippo, you need to get its insides. On this part there is a felt pad, bending which you can see the fleece. Actually, it needs to be soaked in gasoline. During work, care should be taken so that the substance does not spill.

The lighter has firmly entered the lives of people since the end of the 19th century. This modern look The fire starter is designed for thousands of uses. In addition to practical use, the lighter is endowed with the function of a prestigious decorative element, of course, if it is expensive and branded.

Species and types

Types of lighters these days are different great variety. They can be plastic, metal or a combination. By type of refueling, gasoline and gas specimens are produced. The latter are more common. Gasoline last longer, but require frequent refueling. Usually they are more expensive than gas. According to the way the fire is ignited, these accessories can be mechanical, turbo or piezo. In addition, lighters differ in what method was used to apply a pattern to their surface. When decorating plastic, the pad printing technique (tampon printing) is used. Metal is usually engraved. Also, lighters are disposable and reusable. The first ones are much cheaper, but after they run out of gas, they have to be thrown away. Lighters, in addition to being used to light cigarettes and cigars, can be used in a number of other cases. Produced, for example, a special type, designed to ignite the burners of gas stoves.

Refueling with gas

Having bought an expensive reusable model, the user often wonders how to fill the lighter with gas. This seemingly simple process has some nuances. First of all, you need to make sure that the lighter is reusable. Even if there is a hole at the bottom of the case, this does not mean that it is refueling. Next, we present a small instruction on how to fill the lighter with gas:

remember that refueling can only be started after the previous portion of gas has been completely used;
set the valve that regulates the strength of the flame to a minimum;
take a thin sharp object and push the valve responsible for air intake with it;
after all the gas is completely out of the case, try to set fire to the lighter (it should not work);
take the cartridge and, pressing it firmly against the inlet, slightly pressing, let the gas into the body.

The whole process takes no more than 2 - 3 minutes. Before filling the lighter with gas, you need to keep in mind that this only requires triple-purified butane. Otherwise, a gas that has an unacceptable amount of impurities may clog it.

Repair

Like any household item, lighters sometimes break. If this is a fairly expensive model, you can try to repair it. But for this it is best to contact a special workshop. Repairing lighters is a rather complicated matter. If you don't want to spend too much on it, it's best to just buy a new one.

Now you know how to fill the lighter with gas, and if necessary, you can easily do it. And finally, a little advice. When buying, try to avoid a counterfeit product. A lighter is a rather dangerous item, so it is better to use branded models.

Cheap gas lighters refuel with gas may not make sense. Although why not? But beautiful original lighters just have to be filled, otherwise, why are they needed then?

The filling procedure is simple, but there are some nuances.

You will need a can of gas for lighters and possibly a set of nozzles. But as practice shows, the nozzle of the can itself is usually suitable.

Especially for clarity, we took a transparent lighter to see the filling process.

Since lighters are usually worn in pockets or bags, the valve can become clogged with some kind of debris or dust. Therefore, the first step is to clean the valve.

To do this, press the center of the valve with a sharp object. You should hear a characteristic "puff". Residual gas is released under pressure. This is usually enough to purge debris from the valve.

Next, if you right-handed, take lighter in right hand , bottle to the left. If you lefty, then vice versa. This is done so that the leading hand is the guide, there is less deviation from the refueling guide line, and there is less error in tilting the can from the lighter valve.

Turn the can upside down and insert the nozzle into the lighter valve. With a confident strong movement, press lighter for a can with gas for 2-3 seconds.

In this way, more tight connection between a lighter and a gas canister. If a gas comes out, this means that the canister and the lighter are not aligned and the nozzle has not entered the valve well or the lighter is already full.

To be sure, the procedure can be repeated.

As we can see, the lighter is almost full.

If there is already little gas in the can and the pressure in it is weak, then in order to fuller refuel gas lighter, you can put it before refueling for a few minutes in freezer fridge...

Then refuel the lighter as usual. With a cold charging method, the lighter has to be replenished with gas much less frequently.

Necessarily give the lighter rest at room temperature for 20 minutes, because when refueling, the expanding gas cools itself and cools the lighter, which affects its operation.

The invention of reusable lighters is a real discovery, and not only for lovers of tobacco smoke from cigarettes or Cuban cigars. Tourists and travelers also need these portable incendiary devices. But how to refuel a lighter if it suddenly stops working? First, they look at the brand and the combustible substance on which it works. The main varieties are gas and gasoline models. For expensive brands, special cylinders with gas or gasoline are sold. They pass up to 3 degrees of purification and do not destroy small parts of branded incendiary devices. Self-refueling will require attention and skill.

How to fill a lighter with gas from a can?

First, get a cylinder of butane gas. It has 5-6 adapters, among which there is one suitable for a particular model of lighter. But before refueling, you need to make sure that all the gas inside the lighter is used up.

The valve must be pressed with a match, pen, pencil to release excess oxygen. The device cools down to room temperature for safety engineering.
Regulate the flame, you can translate its position to a minimum height. The desired valve is selected, fixed, and the cylinder is turned upside down with the filling part.
Carefully holding the transition valve, refuel the lighter continuously for 5 seconds. After refueling, the device is not used for about 5 minutes, so that the pressure equalizes, and the porous rod has time to be saturated with gas.

How to fill the lighter: follow the instructions.

Remember also about safety. Near the fire, the incendiary device is not refueled; if the gas accidentally gets on the mucous membranes or skin, it is immediately washed off.

How to refuel a petrol lighter?

Refueling a gasoline product is almost the same as refueling a gas lighter. Also, for branded accessories, special cylinders with refined gasoline can be produced, you need to ask at the points of sale of branded incendiary devices.

Before refueling, the core is removed from the body. Turn the lighter over and look at the bottom. There is an entrance for the refueling device.
They pour gasoline, but carefully monitor the filling. Spilled fuel is removed immediately.
After refueling is completed, the inlet chamber is closed, only after that the core is inserted back.

It is important that it is better to refuel incendiary devices away from fire and fabric furniture. Gasoline spilled on the sofa can easily ignite if the accessory is used carelessly.

Refillable gas lighters are sold empty for safety reasons. The fueling procedures for a new product and a used product do not differ much from each other. How to fill a lighter with gas from a canister, if it already weakly supports combustion or does not ignite at all, is described below.

Do not attempt to fill the lighter with gas immediately after use. Make sure it is empty, let it rest enough time for all the mechanisms to cool down.

Set flame height control to minimum.. This is usually a brass adjustment screw at the base of the housing with a slot for a screwdriver. Some models are supplied with a wrench to turn the adjusting head. Many are equipped with a wheel that does not require a special tool to rotate. Do not apply much force when turning the adjusting devices. If there are difficulties in reducing the height of the fire, then most likely the adjusting screw is in the limit position + or -. Try his move the other way.

Release of residual gas

Press the fill valve using one of the appropriate tools:

screwdrivers;
ballpoint pen;
paperclips;
toothpicks;
suitable adapter supplied with the cylinder.

Hold it open until a hissing sound is heard. When depressurizing the reservoir, carry out all manipulations away from your face.

Filling the tank

Fill upside down only. The lighter should be taken in hand so that it can be easily held, preferably with an emphasis on some hard surface. First, shake the can of gas several times.

Insert the nozzle of a can with a suitable size nozzle tightly into the filling valve and press it on the filling rod. If liquid gas begins to fill the tank, the body of the lighter will quickly cool. Do not fill for more than five seconds. If this is not enough, repeat the procedure after a while. The release of excess gas to the outside will let you know about the complete filling of the tank.

Checking the lighter

Do not try to put out the fire immediately after refueling.. Allow the cooled case to warm up to room temperature. This will take a few minutes. Rub your hands to evaporate the remnants of the gas mixture from them. Set the flame control to a quarter of the maximum and try to light the lighter. Be sure to do this away from your face. Do not be surprised if the fire immediately breaks out unexpectedly strong. If everything works properly, adjust the required height of the torch.

Some actions seem so intuitively simple that no one thinks about how to perform them. Start the car, toast the toast, button up the jacket - what could be easier? In fact, these simple things can be more difficult than at first glance. The quick guides below will help you not only how to properly fuel your lighter to prolong its life, but also how to do it safely for yourself and others.

Do not refuel the lighter in closed, unventilated spaces, in a car interior, in cramped spaces.
Never do this near sources of sparks or open flames, near smokers. The tank and can contain butane under high pressure. He is exceptionally hot.
Protect your eyes while refueling and try not to inhale gas fumes.
Use only high-quality butane at least triple purification. The cleaner the fuel, the lower the risk of clogged valves. Poor quality gas can cause the lighter to malfunction during operation and problems during refueling.
To quickly fill the reservoir to capacity, try pre-chilling it in the freezer for 5-10 minutes. The gas bottle does not need to be refrigerated. If there is a fuel level window on the case, you will notice a difference with the procedure for refilling a warm lighter.
Lighters do not like long pauses in work. Try to use them periodically. This will prolong their life. If long-term storage is necessary, release the gas from the tank. How to do this is described in the relevant section above.
It is not necessary to set up a large flame and dip a cigarette into it. The greatest heat is located at the very tip of the torch and spreads higher in the invisible zone. This knowledge will help preserve the smoker's mustache and eyebrows, and proper use of the flame keeps the lighter's mechanisms from becoming clogged with ash.
Buy a can of compressed air. it right tool to take care of the lighter. Blowing out valves and clearing debris in hard-to-reach places will be much easier.

There is another easy way to fill up with gas. If it seems difficult to repeat the instructions you read on your own, entrust this matter to specialists.

It's not just a fashion accessory. This is a high-quality and durable lighter that will serve its owner for many years.

But, like any good accessory, a lighter needs care. First of all, the lighter must be regularly refueled. But how do you fill a Zippo lighter?

Start by purchasing lighter fluid. Some mistakenly believe that filling a branded lighter with any flammable liquid is beneficial. However, only genuine Zippo fuel will give you an accurate guarantee of lighter durability and bad smell. If you already have liquid, then read our instructions on how to refuel a Zippo lighter.

Remove the lighter from the case. This can be done as follows: firmly holding the flint wheel with two fingers with one hand, carefully, with a little effort, remove the metal part of the case. If you are refilling the lighter for the first time, disassembling it in this way will not be difficult for you.
Raise the bottom corner of the valve. It has the inscription “Lift to fuel”, which translates as “raise for refueling”. It's important to be careful here.
Start filling the cotton wool with gasoline. Fill slowly, never overfill. If the purchased liquid comes in a large bottle, pour it into a smaller container for convenience.
Avoid dripping gasoline on your hands as this can cause skin damage. If you spill gasoline on your hands, wash them with soap and water.
After assembly, set the lighter aside for a few minutes so that it is sufficiently soaked.

Refilling a Zippo lighter: how to check the effect?

In order to find out if the lighter has been filled correctly, it is necessary to check it (preferably indoors). Open the lid of the lighter, hold it on the weight, slightly lifting it up, gently turn the wheel until the fire appears. In the event that the Zippo refueling was successful, no failures should occur.

If there are any problems, try to determine what you did wrong, read again how to properly refill Zippo (Zippo), and if necessary, repeat the procedure again, or replace the silicon or Zippo wick.

Features when refueling Zippo

It must be taken into account that Zippo gas station has its own characteristics, the knowledge of which will help you avoid mistakes that can lead to breakage of the lighter.

It is recommended to use only Zippo branded materials (wicks, fuel, flint) when refilling, as they are guaranteed to fit a quality branded lighter. You can easily buy these products in our store. We are sure you will like our pricing policy.
It is very important that after filling the Zippo, wipe the lighter thoroughly with a dry cloth in case you accidentally drop gasoline on the Zippo. The cost of a mistake can be high! For your own safety, do not fill the lighter alone and have fire-fighting items ready, such as a clean and damp handkerchief.
Make sure your lighter fuel container is at a safe distance before checking fuel quality.
When refueling, do not rush, it is very important to accurately calculate the amount of fuel needed so that you do not accidentally overfill the Zippo fuel chamber. And in this case, it's not just about saving. Lighters of this class are very gentle and require special treatment. Having overfilled the chamber, it is likely that this accessory will become completely unusable.

By the way, since you have dismantled your lighter for refueling, you can clean it from dirt at the same time. This will affect not only her appearance but also on performance.

Even though the rules for how to fill a Zippo lighter may seem overwhelming, the whole process won't take you more than five minutes. So that you can verify this and see clearly the process of refueling such a popular accessory, we suggest you watch a short video.

Detailed instructions on how to fill a Zippo lighter (Zippo)

If your favorite Zippo lighter runs out of gas, don't rush to throw it away. She will continue to be able to please the owner with her bright fire, if she is refueled. Below is step-by-step instruction, which will make it clear how to properly refuel a zippo lighter.

Be sure to inspect the lighter from all sides and the place where the refueling process took place. Check if you have spilled gasoline anywhere - otherwise it may catch fire, because Zippo fuel liquid is highly flammable.

If you have already inadvertently splashed yourself with fuel, immediately wash with soap and water the parts of the body that have come into contact with the liquid. Avoid contact with eyes. To do this, try not to touch them and do not wipe them while refueling the lighter. It is recommended to use closed clothing and gloves during the process of refueling the lighter. Safety is paramount.

At first glance, refueling Zippo lighters seems to be a fairly simple process, but you must strictly follow the instructions and follow each step of refueling in the indicated sequence. You are dealing with fire, so be extremely careful and follow the safety rules.

Zippo fuel fluid is completely natural and therefore tends to evaporate relatively quickly, which continues even when the lighter is not in use. When going on a long trip, it is recommended to refuel the product before departure just in case.

To feel absolutely safe, you can purchase cases from the new collection from Zippo. The main material used in their manufacture is Genuine Leather. Cases not only guarantee the safety of the owner, protect the product from scratches, but also look great, giving the lighters even more solidity.

How to properly refuel a Zippo lighter: gasoline

For refueling, you can use special gasoline. Automotive gasoline is not recommended because its combustion temperature is too high, which means you will need to change the filter frequently.
Refilling zippo lighters has one trick. The gas cylinder can be used several times, but after each refueling, the pressure inside it will decrease. Therefore, before proceeding directly to this process, the lighter must be held in the freezer for some time, which will make it possible to fill it in a larger volume.

If you still don't understand how to fill a Zippo lighter or just want to see how the process is done in practice before you start it yourself, you can watch the video below.

Are you the kind of person who always has a lighter in his trouser pocket or handbag? Then this topic is for you - learn how to fill zippo flip-down lighters, flint gas lighters, turbocharged lighters and household one-day lighters. Let's use an example to show how to refuel lighters and share a gas saving life hack.

How to refuel a plastic lighter

Ordinary gas lighter cricket, bik or transparent plastic "Chinese". Almost all of these types of lighters are equipped with a refill valve, with the exception of disposable lighters for one pack of cigarettes.

Safety rules before charging the lighter:

Open the vents and windows - you need to ensure good ventilation.
You will need gloves and a change of clothes - the gas has a corrosive smell.
The lighter must be filled up to ⅚ of the original volume. In terms of time, this is 8 seconds of contact with a gas cylinder.

We refuel an ordinary gas lighter at home:

Turn the flame regulator on the lighter all the way down. It looks like a lever next to a metal insert, but note that not all models are equipped with it.

The metal plug is removed, in the photo - the gas adjustment lever is at a minimum

Find the valve at the bottom of the lighter.

Lighter valve - profile view. On it is a pressure adjustment ring in the valve

In some models, the valve may be closed with a plastic plug - pry it off with a knife and remove it.

To clear the valve of the lighter from debris and release excess gas, press the valve with a needle, toothpick or sharp tip of a nail file - a slight "zilch" will notify you of the release of gas.

It's time to get a cylinder for gas filling and pick up a "nose" for the valve.

Cylinders for refilling lighters always come with nozzles - there is always one suitable one.

How to understand that the "nose" fits the lighter?

Put the lighter on the adapter - if it fits tightly, then the adapter suits her.

We are docking a cylinder for refueling with a lighter.

Turn the lighter with the valve up, the cylinder with the stem down. As in the photo.

Press them together with force for 8 seconds, then pull the nose of the cylinder out of the lighter. Before striking the flint: wait five minutes for the pressure inside the lighter to equalize.

Life hack for the economical - put the lighter in the freezer for 6 minutes, take it out and then refill it. This will allow more gas to enter.

How to refuel a turbocharged lighter

Turbo lighters have one feature - pressure. Fortunately, manufacturers gas cylinders for refueling, they are always equipped with a couple of additional atmospheres.

There is no particular trick to refilling turbocharged lighters or household stove lighters. Such models are refueled in the same way as conventional gas lighters: cool, find the valve, clean, fit, press, wait 8 seconds and release.

How to refuel a petrol lighter

It should be clear - gasoline lighters operate on highly refined gasoline, without oily impurities and suspensions in the liquid. "Charge" petrol lighter the usual "92nd" means to kill the wick for taking the liquid.

How to fill a petrol lighter?

Any clean lighter fuel: Ronson, Zorro, Zippo Gasoline, Zippo Premium Lighter Fluid or any refined gasoline. In extreme cases, medical alcohol from 94% is suitable.

How often should you refuel your lighter?

The lighter holds 10 ml of fuel.

We smoke five cigarettes a day and still ask for supplements: once every three days.
A cigarette a day and we no longer indulge - once a week.
Smoke once on Friday at the balcony - once a month.

How to fill a zippo

Zippo, Star, collectible Marlboro lighters, any other branded flaps are refueled according to the same principle.

Open the lighter and holding it with your fingers, pull out inner part. This detail is also called an insert (from the English "insert" - to insert).

A screw is needed to hold the flint, you are interested in a felt lining that says "Lift-to-Fill" or "Lift to Fill". So let's do it.

Pry off the lid of the lighter fluid canister.

Lift up the felt pad a little and insert the spout of the canister into that little hole next to the bolt.

Peel back the felt and fill with fuel to the brim.

Cotton balls used as a fluid retainer do not immediately absorb fuel. Wait until the gasoline is completely absorbed, and repeat refilling the portion. When gasoline starts to rise to the edges - "The tank is full."

To avoid leakage after refueling, hold the lighter upside down for a few minutes.

Assemble the lighter, close the cover and shake it well several times so that the fuel is evenly distributed throughout the cotton.

Be sure to wipe the surface of the lighter with wet wipes and wash your hands - refined gasoline has no taste or smell, its vapors burn, which can linger anywhere.

If there is no fire, you have filled in little fuel.

How to properly refuel a zippo lighter with original gasoline, see the video.

How to refuel a disposable lighter

Your transparent plastic "Chinese" has a dead battery, but during a cursory examination of the valve for refueling, they did not find it?

The rational answer is to buy a new lighter and play it safe. They cost about 15 UAH, enough for a month, they come in any color.

If, for some personal reason, buying a new lighter is bad manners, it can be charged from an ordinary cylinder. Be warned - it's dangerous as hell.

Cool the lighter in the freezer: support it there for 10 minutes, let it think about its behavior.
Drive two matches (or thin, bamboo toothpicks) under the plastic lever that opens the fuel supply valve, jamming it into the "gas release" position.
Firmly attach the nozzle of the gas cylinder to the spout of the lighter and press it down for 3 seconds.
After refueling, wipe down the lighter, your hands, and any surfaces you have worked with.
Wait about a minute and click. Lit - good, exploded - overexposed.

Important - do not fill the lighter with acetone, propane or methane: this is dangerous. Use refined gasoline for refueling, household butane in cylinders and everything will be fine.

Filling electric lighters

Perhaps the easiest and safest way to refuel a lighter that every girl can handle is USB charging. Electric pulse lighters with electronic ignition have this advantage.

Such lighters work without gas and fuel. They perform their function in any weather, are environmentally friendly, do not explode when heated in the sun or when dropped, they are considered much more practical, more convenient and safer than gas analogues.

Looking for an electric pulse lighter for yourself or as a gift at the best price? Go to Pokupon and buy with a good cashback.

Tell us about your favorite lighter that you don’t want to part with - what is it like, and have you got used to refueling it?

How to fill a lighter with gas from a can?

The valve must be pressed with a match, pen, pencil to release excess oxygen. The device is cooled to room temperature for safety reasons.
Regulate the flame, you can translate its position to a minimum height. The desired valve is selected, fixed, and the cylinder is turned upside down with the filling part.
Carefully holding the transition valve, refuel the lighter continuously for 5 seconds. After refueling, the device is not used for about 5 minutes, so that the pressure equalizes, and the porous rod has time to be saturated with gas.

How to fill the lighter: follow the instructions.

Remember also about safety. Near the fire, the incendiary device is not refueled; if the gas accidentally gets on the mucous membranes or skin, it is immediately washed off.

How to refuel a petrol lighter?

Before refueling, the core is removed from the body. Turn the lighter over and look at the bottom. There is an entrance for the refueling device.
They pour gasoline, but carefully monitor the filling. Spilled fuel is removed immediately.
After refueling is completed, the inlet chamber is closed, only after that the core is inserted back.

It is important that it is better to refuel incendiary devices away from fire and fabric furniture. Gasoline spilled on the sofa can easily ignite if the accessory is used carelessly.

Gas lighters are a very convenient and popular tool. They are used by a huge number of people. But one day the moment comes when the fuel inside the hull runs out. At the same time, many people have a question about gas. The matter is simple. However, everything must be done carefully and carefully. So, let's look at this process step by step.

How to properly fill the lighter with gas is an important question. But it is equally important to know what fuel to use. In order for the tool to work smoothly, and its components do not become clogged, refueling must be carried out only with triple-purified butane gas. Before this, it is imperative to free the lighter from the air remaining in it. Of course, the gas itself must also be fully utilized. The air that always remains in the case after the fuel runs out is disposed of as follows. The gas supply regulator is set to "minimum". The combustion level valve for most lighters is located in the base area and it will not be difficult to find it.

The answer to the question of how to fill a lighter with gas is not at all complicated. You just need to show a little sleight of hand. In order to release the air, then simply take a needle, thin pin or any other similar sharp instrument and move the suction valve. After that, everything superfluous will come out of the lighter. Then, to fully guarantee the result, you need to click the lighter. Of course, you will not see fire in this case, however, if air or butane residues are still present in the case, they will finally come out.

Now consider actually using a spray can. To do this, it is firmly clamped in the hand and turned over. Next, insert the tip of the gas container into the valve located below and press hard. Hold the can in this way for 5-10 seconds. Then he is abruptly pulled away from the lighter. Be sure to hold the can only with the nipple down. In the event that everything is done correctly, you will not feel the characteristic chill, since the gas will not come out, but will go straight into the body of the lighter.

During refueling, a characteristic hissing sound will be heard. Some cartridges are equipped with special dispensers. In this case, you will have to carry out refueling in several steps. Filling the body with gas refers to which is always accompanied by some decrease in temperature. Therefore, before you start using the lighter, you should wait a bit until it warms up. It will not take much time - no more than five minutes.

Sometimes the owners of expensive imported lighters, without the risk of holding such an event on their own, are interested in where to fill the lighter with gas for money. This is usually done by specialized workshops. Residents of small towns, most likely, will still have to pick up a can and fill the lighter on their own. It will not be difficult for those living in megacities to find a suitable workshop. For example, Muscovites who own Dupont lighters have the opportunity to take them to the top floor of the Central Department Store, to the official representative office of Dupont.

Thus, now you understand how to fill the lighter with gas. If you have skillful hands, this will not be difficult to do.