Technological equipment repairman of the 4th category. Mechanic for the repair of technological installations, etc. etc. In the course of vocational training

19.04.2020

We bring to your attention a typical example of a job description for a repairman technological installations 6th category, sample of 2019. A person with education or special training and work experience can be appointed to this position. Do not forget that each instruction of a mechanic for the repair of technological installations of the 6th category is issued on hand against receipt.

It presents typical information about the knowledge that a mechanic for the repair of technological installations of the 6th category should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. A mechanic for the repair of technological installations of the 6th category belongs to the category of workers.

2. A person with ________ (education, special training) and ________ years of work experience in this position is accepted as a mechanic for the repair of technological installations of the 6th category.

3. A mechanic for the repair of technological installations of the 6th category is hired and dismissed by __________ (by whom, position)

4. A mechanic for the repair of technological installations of the 6th category must know:

a) special (professional) knowledge of the position:

— design features especially complex equipment;

— technical conditions for the repair, testing and commissioning of especially complex unique equipment;

— technology of metals;

- ways to restore particularly complex and critical nodes;

— permissible loads on working parts, assemblies and mechanisms of equipment;

- systems Maintenance and equipment repair.

- qualification requirements for this position of a lower rank.

b) general knowledge of the employee of the organization:

— rules on labor protection, industrial sanitation and fire safety;

- rules for the use of funds personal protection;

- requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

- range and marking of materials used, consumption rates of fuels and lubricants;

- rules for the movement and warehousing of goods;

- types of marriage and ways to prevent and eliminate it;

5. In his activities, a mechanic for the repair of technological installations of the 6th category is guided by:

— legislation Russian Federation,

- Charter (regulations) of the organization,

- real job description,

- The internal labor regulations of the organization.

6. The mechanic for the repair of technological installations of the 6th category reports directly to: ____________ (position)

2. Job responsibilities of a locksmith for the repair of technological installations of the 6th category

Locksmith for the repair of technological installations of the 6th category:

a) Special (professional) duties:

1. Repair, installation, dismantling, assembly, testing and adjustment of especially complex unique installations, devices, machines and units using mechanisms.

2. Identification and elimination of defects during the operation of the equipment and when checking during the repair process.

3. Accuracy check and load test of repaired equipment.

4. Duties of the official for this position of a lower (s) category (s).

Work examples:

1. Air coolers - assembly and alignment of the gearbox.

2. Drum vacuum filter - replacement of intermediate bearing shells, repair of the faceplate, adjustment of the distributor head, commissioning.

3. Granulators - sorting of parts, repair and assembly of the drive head, corkscrew, alignment of the main drive electric motor, alignment of the knife support.

4. Centrifugal compressors - repair of labyrinth seals and rotor; rotor balancing, alignment, assembly.

5. Gas engine compressors - fitting, adjustment, testing.

6. Waste heat boilers - overhaul, hydraulic tests. Lens seals for pipelines high pressure(700 - 2500 atm) - repair.

7. Tubular furnaces - test (hydraulic or pneumatic) of the coil.

8. Reactors - hull repair, hydraulic testing.

9. Catalytic cracking reactors - replacement of the stuffing box sleeve, lens compensator and straight section of the pressure riser, separation plate glass, side pipes and outlet manifold collector.

10. Reactors for catalytic reforming and hydrotreatment - repair and assembly of the glass, switchgears, pocket of zone thermocouples.

11. Stirred reactors - installation of a stirrer and bottoms in a high-pressure reactor, alignment and assembly of coupling joints, hydraulic testing.

12. Catalytic cracking regenerators - replacement of the coil, defective sections, distribution grid, production of an air box, replacement of defective sections.

13. Planetary gearboxes and with a complex tooth profile - assembly.

14. Heat exchangers (raw materials) of hydrotreating, catalytic reforming, hydrocracking and other units over 200 atm - assembly, testing.

15. High-pressure pipelines for any liquids and gases, as well as pipelines of reactor blocks of catalytic reforming, hydrotreatment, hydrocracking units - repair, assembly.

16. Steam turbines - checking the gap between the blades, housing, rotor; repair and establishment of gaps in diaphragm seals, stuffing box seals, in thrust and support bearings, alignment, adjustment.

17. Turbochargers - overhaul and delivery.

18. Centrifuges - pressing clutch couplings, shaft alignment, pressing out and assembly of the mechanical seal housing, disassembly and assembly of probes, scraping of bearings, bushings, sorting of parts, commissioning.

b) General duties of an employee of the organization:

— Compliance with the Internal Labor Regulations and other local regulations of the organization, internal rules and norms of labor protection, safety measures, industrial sanitation and fire protection.

– Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with this instruction.

– Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in good condition.

- Maintaining established technical documentation.

3. Rights of a locksmith for the repair of technological installations of the 6th category

A mechanic for the repair of technological installations of the 6th category has the right to:

1. Submit proposals for management consideration:

– to improve the work related to the provisions of this responsibilities,

- on the promotion of distinguished employees subordinate to him,

— on bringing to material and disciplinary responsibility employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the management concerning its activities.

5. Require management to provide assistance, including the provision of organizational and technical conditions and the execution of established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of a locksmith for the repair of technological installations of the 6th category

The mechanic for the repair of technological installations of the 6th category is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established current legislation Russian Federation.

Job description for a locksmith for the repair of technological installations of the 6th category - a sample of 2019. Job Responsibilities mechanic for the repair of technological installations of the 6th category, the rights of a mechanic for the repair of technological installations of the 6th category, the responsibility of a mechanic for the repair of technological installations of the 6th category.

Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Part No. 1 of issue No. 36 ETKS
The issue was approved by the Decree of the State Committee of the USSR on Labor and Social Affairs and the All-Union Central Council of Trade Unions of June 7, 1984 N 171 / 10-109
(As amended by the Decrees of the USSR State Committee for Labor, the Secretariat of the All-Union Central Council of Trade Unions of 03.02.1988 N 51 / 3-69, of 08.14.1990 N 325 / 15-27, the Ministry of Labor of the Russian Federation of 11.21.1994 N 70, of 07.31.1995 N 43)

Mechanic for the repair of technological installations

§ 46. Locksmith for the repair of technological installations of the 2nd category

Job Description. Disassembly, repair, assembly and testing of simple components and mechanisms of machines, apparatus, pipelines, fittings. Repair of simple installations, units and machines, as well as of medium complexity under the guidance of a more highly qualified locksmith. Locksmith processing of parts according to 12 - 14 qualifications (5 - 7 accuracy classes). Washing, cleaning and lubricating parts. Marking and drilling holes on flanges. Straightening, filing and cutting threads on pipes. Manufacture of simple fixtures for assembly and installation of repaired equipment.

Must know: device, purpose and principle of operation of individual devices and units of equipment being repaired; operating conditions of the serviced equipment; basic locksmithing techniques; general rules for welding and soldering; rules for testing pipelines of small diameters; basic concepts of tolerances and landings, qualifications, classes of accuracy and cleanliness of processing; purpose and rules for the use of devices and tools; pipe marking techniques; drawing elements; rules for the use of oils, detergents and lubricants.

Work examples

1. Manhole covers of machines and devices - removal and installation.

2. Protections - removal and installation.

3. Gaskets - production.

4. Heat exchangers of the "pipe in pipe" type - disassembly.

5. Pipes of the cooling and lubrication system - cleaning.

6. Gas nozzles - revision.

§ 47. Mechanic for the repair of technological installations of the 3rd category

Job Description. Disassembly, repair, assembly and testing of the average complexity of units and mechanisms of machines, apparatus, pipelines, fittings. Repair of medium complexity installations, assemblies and machines, as well as complex ones under the guidance of a more highly qualified locksmith. Locksmith processing of parts according to 11 - 12 qualifications (4 - 5 accuracy classes). Disassembly and assembly of piping devices, pumps, compressors. Manufacture of medium complexity fixtures for assembly and installation of repaired equipment.

Must know: device and principle of operation of the repaired equipment, fittings; specifications for pipes; profile steel, fixing materials; fundamentals of welding; properties of welded metals; rules for laying pipelines; equipment operation rules; fundamental technological scheme and the scheme of communications of the serviced installation; tolerances and landings; quality and roughness parameters.

Work examples

1. Fittings low pressure- removal, repair, installation.

2. Compressors - disassembly and removal of valves, seals, oil deflectors, crossheads, bearings, valve covers and cylinders.

3. Oil pumps, lubricators - dismantling, repair.

4. Piston, plunger, centrifugal and gear pumps disassembly, repair.

5. Oil seals - stuffing.

6. Pipelines and devices of the cooling and lubrication system of compressors and pumps - disassembly.

7. Furnace pipes, plates and inter-plate space of columns, tubes and annular space of heat exchangers, tubes of refrigerator condensers - cleaning from coke and deposits.

§ 48. Locksmith for the repair of technological installations of the 4th category

Job Description. Dismantling, repair, assembly of complex installations, machines, devices, pipelines and fittings using lifting mechanisms. Locksmith processing of parts according to 7 - 10 qualifications (2 - 3 accuracy classes). Removal and installation of working and control safety valves from capacitive equipment. Testing, adjustment and delivery of equipment after repair. Manufacture of complex fixtures for assembly and installation of repair equipment. Preparation of defective repair reports.

Must know: purpose, arrangement of complex equipment; technical conditions for repair, testing, adjustment and delivery of repaired equipment; basics of preventive maintenance; system of tolerances and landings, qualifications and roughness parameters; methods of marking and processing simple various parts; arrangement of load-lifting mechanisms and rules for their use; basics of rigging; rules for checking repaired and assembled units and devices.

Work examples

1. Air coolers - disassembly of the gearbox.

2. Column type devices - repair, assembly of internal devices, removal and installation of covers, heads.

3. Heat exchangers - assembly.

4. Granulators, crystallizers, mixers, filters - disassembly, repair, assembly.

5. Piston compressors - disassembly, repair and assembly of cylinders, crankshaft, crosshead assembly, valves, pistons.

6. Centrifugal compressors - disassembly of the rotor, repair of bearings and gear couplings.

7. Centrifugal, double-casing and multi-stage pumps with more than four impellers - disassembly.

8. Tubular furnaces - replacement of pipes, doubles.

9. Reactors - replacement of the lantern, removal of heads, removal and installation of the zone thermocouple pocket, assembly of the seal assembly and coupling joints.

10. Reducers - repair, assembly, adjustment.

§ 49. Mechanic for the repair of technological installations of the 5th category

Job Description. Disassembly, repair, assembly of particularly complex installations of machines, devices, units, pipelines, fittings using mechanisms and delivery after repair. Locksmith processing of parts and assemblies according to 6 - 7 qualifications (1 - 2 accuracy classes). Dismantling, repair and assembly of components and equipment in conditions of intense and dense landings. Technical certification of equipment.

Must know: device and design features of complex equipment; technological sequence and organization of labor during the repair, assembly, installation of equipment; all types of materials used in the repair; methods for determining premature wear of parts; static and dynamic balancing of machines; geometric constructions with complex markup; ways to restore worn parts; methods of repair of equipment and apparatus operating under high pressure.

Work examples

1. Apparatus - repair of the body (not requiring heat treatment), checking the plates for bubbling.

2. Shut-off, safety and control valves - disassembly, repair, grinding, assembly and adjustment.

3. Ventilation ducts - assembly.

4. Blowers, blowers and superchargers - repair, testing.

5. Compressors, pumps - scraping of bearing shells and other machine parts, repair of safety and check valves.

6. Piston compressors - adjustment and commissioning.

7. Gas engine compressors - repair.

8. Condensers-refrigerators - removal and installation of sections.

9. Ball mills, roller mills, crushers, screens, smoke exhausters, granulators - overhaul, testing, commissioning.

10. Centrifugal, double-casing and multi-stage pumps with more than four impellers - repair, assembly, commissioning.

11. Tube furnaces - control, rejection of pipes.

12. Reactors - repair.

13. Heat exchangers (raw materials) of hydrotreatment, catalytic reforming, hydrocracking and other over 200 atm repairs.

14. Centrifuges - repair.

§ 50. Mechanic for the repair of technological installations of the 6th category

Job Description. Repair, installation, dismantling, assembly, testing and adjustment of especially complex unique installations, devices, machines and units using mechanisms. Identification and elimination of defects during the operation of the equipment and when checking during the repair process. Accuracy and load testing of repaired equipment.

Must know: design features of especially complex equipment; technical conditions for the repair, testing and commissioning of especially complex unique equipment; metal technology; ways to restore especially complex and critical nodes; allowable loads on operating parts, components and mechanisms of equipment; equipment maintenance and repair systems.

Work examples

1. Air coolers - assembly and alignment of the gearbox.

2. Drum vacuum filter - replacement of intermediate bearing shells, repair of the faceplate, adjustment of the distributor head, commissioning.

3. Granulators - sorting of parts, repair and assembly of the drive head, shtober, alignment of the main drive electric motor, alignment of the knife support.

4. Centrifugal compressors - repair of labyrinth seals and rotor; rotor balancing, alignment, assembly.

5. Gas engine compressors - adjustment, adjustment, testing.

6. Waste heat boilers - overhaul, hydraulic tests. Lens seals for high pressure pipelines (700 - 2500 atm) - repair.

7. Tubular furnaces - test (hydraulic or pneumatic) of the coil.

8. Reactors - hull repair, hydraulic testing.

9. Catalytic cracking reactors - replacement of the stuffing box sleeve, lens compensator and straight section of the pressure riser, the glass of the separation plate, side pipes and the collector of the outlet manifold.

10. Reactors for catalytic reforming and hydrotreatment - repair and assembly of a glass, switchgears, pocket of zone thermocouples.

11. Reactors with a stirrer - installation of a stirrer and bottoms in a high-pressure reactor, alignment and assembly of coupling joints, hydraulic testing.

12. Catalytic cracking regenerators - replacement of the coil, defective sections, distribution grid, production of an air box, replacement of defective sections.

13. Planetary gearboxes and with complex tooth profile - assembly.

14. Heat exchangers (raw materials) of hydrotreating, catalytic reforming, hydrocracking and other units over 200 atm assembly, testing.

15. High pressure pipelines for any liquids and gases, as well as pipelines of reactor blocks of catalytic reforming, hydrotreatment, hydrocracking units - repair, assembly.

16. Steam turbines - checking the gap between the blades, housing, rotor; repair and establishment of gaps in diaphragm seals, stuffing box seals, in thrust and thrust bearings, alignment, adjustment.

17. Turbochargers - overhaul and delivery.

18. Centrifuges - pressing clutches, shaft alignment, pressing out and assembly of the mechanical seal housing, disassembly and assembly of probes, scraping of bearings, bushings, sorting of parts, commissioning.

§ 50a. Locksmith for the repair of technological installations of the 7th category

(introduced by the Decree of the Ministry of Labor of the Russian Federation of July 31, 1995 N 43)

Job Description. Adjustment and complex adjustment of complex technological complexes, combined and large-capacity plants. Maintenance and diagnostics, including vibration diagnostics of machinery during operation and during repairs. Load testing and tuning of particularly complex machinery and refurbished equipment. Maintenance of technical documentation for the operation and repair of equipment, participation in the launch of complex technological complexes and installations. Management of lower-skilled workers.

Must know: ways to adjust complex technological complexes and installations; design features of especially complex equipment; technical documentation for the repair, testing and commissioning of especially complex equipment; metal technology; system of admissions and landings; modern methods of restoring parts and assemblies - plasma spraying, the use of metal-layers and others; a system of scheduled preventive maintenance of equipment of oil refineries.

Characteristics of works.

Disassembly, repair, assembly of particularly complex installations of machines, devices, units, pipelines, fittings using mechanisms and delivery after repair. Locksmith processing of parts and assemblies according to 6 - 7 qualifications (1 - 2 accuracy classes). Dismantling, repair and assembly of components and equipment in conditions of intense and dense landings. Technical certification of equipment.

What should know:

device and design features of complex equipment
technological sequence and organization of labor during the repair, assembly, installation of equipment
all types of materials used in the repair
ways to determine premature wear of parts
static and dynamic balancing of machines
geometric constructions with complex markup
ways to restore worn parts
methods of repair of equipment and apparatus operating under high pressure.

Work examples

Apparatus - repair of the body (not requiring heat treatment), checking the plates for bubbling.
Shut-off, safety and control valves - disassembly, repair, grinding, assembly and adjustment.
Ventilation ducts - assembly.
Blowers, blowers and superchargers - repair, testing.
Compressors, pumps - scraping of bearing shells and other machine parts, repair of safety and check valves.
Piston compressors - adjustment and commissioning.
Gas engine compressors - repair.
Refrigerator condensers - removal and installation of sections.
Ball mills, roller mills, crushers, screens, smoke exhausters, granulators - overhaul, testing, commissioning.
Centrifugal, double-casing and multistage pumps with more than four impellers - repair, assembly, commissioning.
Tube furnaces - control, rejection of pipes.
Reactors - repair.
Heat exchangers (raw materials) of hydrotreatment, catalytic reforming, hydrocracking and other over 200 atm repairs.
Centrifuges - repair.

Characteristics of works. Repair, installation, dismantling, assembly, testing and adjustment of especially complex unique installations, devices, machines and units using mechanisms. Identification and elimination of defects during the operation of the equipment and when checking during the repair process. Accuracy and load testing of repaired equipment.

Shall know: design features of especially complex equipment; technical conditions for the repair, testing and commissioning of especially complex unique equipment; metal technology; ways to restore especially complex and critical nodes; allowable loads on operating parts, components and mechanisms of equipment; equipment maintenance and repair systems.

Work examples

1. Air coolers - assembly and alignment of the gearbox.

2. Drum vacuum filter - replacement of intermediate bearing shells, repair of the faceplate, adjustment of the distributor head, commissioning.

3. Granulators - sorting of parts, repair and assembly of the drive head, shtober, alignment of the main drive electric motor, alignment of the knife support.

4. Centrifugal compressors - repair of labyrinth seals and rotor; rotor balancing, alignment, assembly.

5. Gas engine compressors - adjustment, adjustment, testing.

6. Waste heat boilers - overhaul, hydraulic tests. Lens seals for high pressure pipelines (700 - 2500 atm) - repair.

7. Tubular furnaces - test (hydraulic or pneumatic) of the coil.

8. Reactors - hull repair, hydraulic testing.

10. Reactors for catalytic reforming and hydrotreatment - repair and assembly of a glass, switchgears, pocket of zone thermocouples.

11. Reactors with a stirrer - installation of a stirrer and bottoms in a high-pressure reactor, alignment and assembly of coupling joints, hydraulic testing.

12. Catalytic cracking regenerators - replacement of the coil, defective sections, distribution grid, production of an air box, replacement of defective sections.

13. Planetary gearboxes and with complex tooth profile - assembly.

14. Heat exchangers (raw materials) of hydrotreating, catalytic reforming, hydrocracking and other units over 200 atm assembly, testing.

15. High pressure pipelines for any liquids and gases, as well as pipelines of reactor blocks of catalytic reforming, hydrotreatment, hydrocracking units - repair, assembly.

17. Turbochargers - overhaul and delivery.

We bring to your attention a typical example of a job description for a mechanic for the repair of technological installations of the 4th category, a sample of 2019. A person with education or special training and work experience can be appointed to this position. Do not forget that each instruction of a mechanic for the repair of technological installations of the 4th category is issued on hand against receipt.

It presents typical information about the knowledge that a mechanic for the repair of technological installations of the 4th category should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. A mechanic for the repair of technological installations of the 4th category belongs to the category of workers.

2. A person with ______ (education, special training) and ________ years of work experience in this position is accepted as a mechanic for the repair of technological installations of the 4th category.

3. A mechanic for the repair of technological installations of the 4th category is hired and dismissed by ________ (by whom, position)

4. A mechanic for the repair of technological installations of the 4th category must know:

a) special (professional) knowledge of the position:

- purpose, arrangement of complex equipment;

- technical conditions for repair, testing, adjustment and delivery of repaired equipment;

— basics of scheduled preventive maintenance;

- a system of tolerances and fits, qualifications and roughness parameters;

- methods of marking and processing simple various parts;

- the device of load-lifting mechanisms and the rules for using them;

- the basics of rigging;

- rules for checking repaired and assembled units and devices.

- qualification requirements for this position of a lower rank.

b) general knowledge of the employee of the organization:

— rules on labor protection, industrial sanitation and fire safety;

- rules for the use of personal protective equipment;

- requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

- range and marking of materials used, consumption rates of fuels and lubricants;

- rules for the movement and warehousing of goods;

- types of marriage and ways to prevent and eliminate it;

5. In his activities, a mechanic for the repair of technological installations of the 4th category is guided by:

- the legislation of the Russian Federation,

- Charter (regulations) of the organization,

- this job description,

- The internal labor regulations of the organization.

6. Locksmith for the repair of technological installations of the 4th category reports directly to: ________ (position)

2. Job responsibilities of a locksmith for the repair of technological installations of the 4th category

Locksmith for the repair of technological installations of the 4th category:

a) Special (professional) duties:

1. Dismantling, repair, assembly of complex installations, machines, devices, pipelines and fittings using lifting mechanisms.

2. Locksmith processing of parts according to 7 - 10 qualifications (2 - 3 accuracy classes).

3. Removal and installation of working and control safety valves from capacitive equipment.

4. Testing, adjustment and delivery of equipment after repair.

5. Manufacture of complex fixtures for assembly and installation of repair equipment.

6. Compilation of defective repair reports.

7. Responsibilities of the official for this position of a lower (s) category (s).

Work examples:

1. Air coolers - disassembly of the gearbox.

2. Column type devices - repair, assembly internal devices, removal and installation of covers, heads.

3. Heat exchangers - assembly.

4. Granulators, crystallizers, mixers, filters - disassembly, repair, assembly.

5. Piston compressors - disassembly, repair and assembly of cylinders, crankshaft, crosshead assembly, valves, pistons.

6. Centrifugal compressors - disassembly of the rotor, repair of bearings and gear couplings.

7. Centrifugal, double-casing and multi-stage pumps with more than four impellers - disassembly.

8. Tubular furnaces - replacement of pipes, twins.

9. Reactors - replacement of the lantern, removal of heads, removal and installation of the zone thermocouple pocket, assembly of the seal assembly and coupling connections.

10. Reducers - repair, assembly, adjustment.

b) General duties of an employee of the organization:

— Compliance with the Internal Labor Regulations and other local regulations of the organization, internal rules and norms of labor protection, safety, industrial sanitation and fire protection.

– Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with this instruction.

- Maintaining established technical documentation.

3. Rights of a locksmith for the repair of technological installations of the 4th category

The mechanic for the repair of technological installations of the 4th category has the right to:

1. Submit proposals for management consideration:

- to improve the work related to the duties provided for in this instruction,

- on the promotion of distinguished employees subordinate to him,

— on bringing to material and disciplinary responsibility employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the management concerning its activities.

6. Other rights established by the current labor legislation.

4. Responsibility of a locksmith for the repair of technological installations of the 4th category

The mechanic for the repair of technological installations of the 4th category is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current legislation of the Russian Federation.

Job description for a mechanic for the repair of technological installations of the 4th category - a sample of 2019. The duties of a mechanic for the repair of technological installations of the 4th category, the rights of a mechanic for the repair of technological installations of the 4th category, the responsibility of a mechanic for the repair of technological installations of the 4th category.