How to calculate the size of a mosquito net. Measurement of a mosquito net for installation on a plastic window. Do-it-yourself measurement and installation of a Hunter Douglas door mosquito net

14.03.2020

Situations are common when they are installed not simultaneously with a plastic window, but after a certain period of time. The difficulty lies in the fact that a standard mosquito net may not fit the dimensions of the window, in which case it is necessary to know how to measure the mosquito net, which will be made to order, in accordance with the dimensions of the customer's plastic window.

Why is it important to correctly measure a plastic window for a mosquito net

Incorrect measurement can lead to negative consequences, for example, if the mesh is too large for a window, it will be problematic to install it, and if it is too small, gaps will appear through which insects and foreign objects from the street will enter the house.

How to correctly measure mosquito nets?

To perform measurements, you will need a regular tape measure and a notebook with a pen to record the results (with millimeter accuracy).

The main stages of measurements:

Measurements are taken on an open window, so it is necessary to open the sash on which the mesh will be attached;
Then the width and height of the light opening are measured (along the edge where the sealing gum is located);
Measurements are taken at the end outer dimension frames in order to make sure that a particular type of mesh is suitable for installation on the selected window.

Types of attachment of mosquito nets: features of their measurements

The design of mosquito nets is usually the same and consists of an aluminum frame and a fiberglass web. In order for the mesh to fit snugly against the window, due attention should be paid to the quality of fastening. Mosquito nets have different types fasteners, so first you need to decide which type you decided to install:

Mount types:

Z-shaped fasteners. They are especially popular because they provide high reliability of fastening. Fastening takes place using nickel-plated brackets that fit snugly to the frame;
Plunger (rod) fastenings. This universal mount is suitable for all types of windows. The plunger is a metal pin with a spring (adjustable in length) on which the mesh frame is attached;
Mounts "pockets". Less common mount, because it does not provide adequate protection.

How to calculate the size of a mosquito net based on measurements

In order to calculate the dimensions of the future mosquito net with a z-shaped mount for plastic windows (see), it is necessary to add 20-25 mm to the obtained height and width of the opening. In addition, it is important to understand whether it is possible to install a grid with such a mount. To do this, take into account the depth of the window frame structure, it can be strongly wound up under a quarter, so difficulties will arise during installation. In this case, it would be more appropriate to install a mesh with plunger fasteners, but it is unsuitable in several cases: if the frame bevel is round and has a large angle of inclination.

This is due to the fact that during installation, the pins are attached to the frame profile, and given the large bevel, it will not be possible to achieve proper strength and reliability. To calculate the dimensions of the mesh, 5-6 mm are subtracted from the obtained results of the height and width of the opening (under the place for the sealing brush, which, during installation, is mounted around the perimeter of the frame). In order to calculate the size of meshes with "pockets" fastening, it is recommended to contact an experienced specialist.

It is not uncommon for a mosquito net to be ordered some time after the windows have been installed. In fact, if new double-glazed windows were delivered in the autumn, it is quite possible to postpone the cost of a mosquito. But, when the owners still decide to order this necessary window accessory, they are faced with a problem. Manufacturers do not make standard grids. Each of them is made to order, strictly according to the size of the window.

In such a situation, there are three options.

Order a mosquito in the same company that made your windows. Perhaps your order with size data remained in their archive.
Call a measurer to your house. This means a waste of time and the cost of paying for the departure of the master.
Measure the window for the mosquito net yourself.

The third option seems to be the most convenient. But before taking measurements, you need to know a few subtleties.

Grids are different

As a rule, frame mosquito nets are installed on plastic windows. They are fairly inexpensive and easy to make. Their design is simple - a fiberglass mesh with a cell of 1 mm is attached to an aluminum frame with a section of 10 * 25 mm. But these accessories differ in the installation method. Depending on the manufacturer, you may be offered different kinds mosquito:

plunger;
Pocket;
with z-shaped fastening.

Before measuring the light opening, decide what type of mosquito you are going to order.

Types of fasteners for mosquito nets

The plunger mount is considered the most effective and durable. The mesh frame is attached to the window with nickel-plated spring pins. They provide a snug fit of the structure and aesthetics outside and inside the room.

Z-mounts are the second most commonly used option. Here, the mosquito structure is attached to the window frame using special metal brackets adjacent to the window seal. This mount is strong enough. But after a couple of years of use, the brackets can become loose and gaps will appear between the mesh frame and the window.

The third type of fastener - "pockets" - is used quite rarely, since it cannot provide a sufficiently tight fit for mosquito protection. The grid for this method is made with a margin for the width and height of the window opening. Here, for accurate measurements, it is still better to contact a specialist. In the other two cases, you are quite capable of calculating the dimensions of this product yourself.

Measuring the window for a mosquito net on z-mounts

To determine the size of the future mosquito net, you will need a tape measure. Open the window and measure the width and height of the skylight. Measurements must be made along the edge of the sealing gum, which is equipped with all plastic windows. Record the results accurately, down to the millimeter.

Product dimensions are calculated as follows:

height = opening height + 20 mm;
width = opening width + 20 mm.

To understand whether there is enough space around the frame to mount the mosquito, it is also necessary to take into account the installation depth of the window frame. If from the side of the sash it is too much under the quarter, it may be difficult to install the mesh. Installation will be difficult even if the slopes of the plastic window are made too close to the edge of the frame. Consider these factors when deciding on the type of grid. If the frame design does not allow the installation of z-mounts, you can order a mesh on the plungers.

Measurements of the window for the grid on the plunger mounts

Installing a mosquito net on pins is possible if the bevel of the outer ledge of your window frame is not rounded and the angle of inclination is too large. Since the spring pins are attached to the profile of the window frame itself, with a strong bevel they will not be able to provide sufficient abutment of the parts.

To calculate the dimensions of the future grid, measure the height and width of the light opening, as in the previous case. Further, subtract 6 mm from the obtained dimensions. This is necessary to leave room for the sealing brush, which is mounted around the perimeter of the mesh frame during installation. You can report the received data to the office where you are going to place an order for a mosquito.

What else to consider when ordering

It makes sense to order frame nets for plastic windows only if the window sashes open inside the apartment. For windows of other designs, there are other types of insect protection.

When taking measurements, take into account each millimeter division of the tape measure. For accessories with a z-mount, it is permissible to round the data, but only up. If the mosquito structure after installation will give a slight overlap on the frame from the outside, it's okay. The main thing is that it completely blocks the light opening, preventing access to insects, small debris and poplar fluff.

As you can see, freeze plastic window to install a mosquito net, you can do it yourself. If after reading the article you still do not understand any points, you can refer to one of the video instructions for taking measurements.

How to measure a plastic window to install a mosquito net

In such a situation there is three options .

Order a mosquito in the same company that made your windows. Perhaps your order with size data remained in their archive.
Call a measurer to your house. This means a waste of time and the cost of paying for the departure of the master.
Measure the window for the mosquito net yourself.

The third option seems to be the most convenient. But before taking measurements, you need to know a few subtleties.

Before measuring the light opening, decide what type of mosquito you are going to order.

Z-mounts- the second most used option. Here, the mosquito structure is attached to the window frame using special metal brackets adjacent to the window seal. This mount is strong enough. But after a couple of years of use, the brackets can become loose and gaps will appear between the mesh frame and the window.

The third type of fastener - "pockets"- is used quite rarely, because it cannot provide a sufficiently snug fit for mosquito protection. The grid for this method is made with a margin for the width and height of the window opening. Here, for accurate measurements, it is still better to contact a specialist. In the other two cases, you are quite capable of calculating the dimensions of this product yourself.

Product dimensions are calculated as follows:

Installing a mosquito net on pins is possible if the bevel of the outer ledge of your window frame does not have a round shape and too much angle. Since the spring pins are attached to the profile of the window frame itself, with a strong bevel they will not be able to provide sufficient abutment of the parts.

It makes sense to order frame nets for plastic windows only if the window sashes open into the apartment. For windows of other designs, there are other types of insect protection.

As you can see, you can measure a plastic window for installing a mosquito net yourself. If after reading the article you still do not understand any points, you can refer to one of the video instructions for taking measurements.

Petrenko Andrey Yurievich

Order mosquito nets with a full range of services (measuring, manufacturing and installation) is the most correct solution, since the probability of an error is minimized, but even if it does occur, then the entire responsibility falls on the shoulders of the seller company.

When purchasing only the product, you yourself take all measurements and install the mosquito net, in which case the responsibility for possible mistakes measurement or installation falls on your budget. The cost of anti-mosquitoes with this option is significantly reduced (on average by 350-400 rubles from square meter). With volumes of 1-5 sq.m, this difference in price will not be so significant, with larger orders (from 10 sq.m) savings of 3500 - 4000 rubles. and more will make a significant contribution to the family budget or save a decent amount for the company. But how to properly measure mosquito nets?

Our company offers two options for fastening m / s - external z-shaped and internal metal. In this article, we will try to explain in detail and in an accessible way what nuances you should pay attention to when taking measurements, in what cases one or another type of fastener is used, and also how to correctly calculate the size of a mosquito net, because. making out order mosquito nets, you must report EXACT NET SIZE AND TYPE OF FIXING .

Option 1: internal metal fittings.

Their main advantage is versatility. Regardless of how your PVC window is installed, you can almost always install a mosquito net on it with this type of fastener.

Before proceeding with the calculation of the dimensions m / s, we need to make sure that its installation will be possible. To do this, it is necessary that the distance from the outer slope to the edge of the frame overlap on the right and left (A and C in the first figure) be greater than or equal to 10 mm, and from above greater than or equal to 20 mm (D in the second figure). If so, then you can safely proceed to the measurements. First of all, we measure the light opening (the distance from overlap to overlap along the width and height of the letters B and E, respectively), then we add 20 mm to these dimensions and get finished size mosquito net.

For example, let's take a window block with a size of 1450X1450 mm divided in half. Depending on the profile system, the size of the light opening will vary. In our case (Brugmann profile system), the size of the light opening of one window sash is 620X1315 mm. We add 20 mm to each parameter and get the finished size of the mosquito net equal to 640X1335 mm. Thus, making out order mosquito nets in our company without installation, you will have to name the width and height of the mesh you need (in that order) and the type of fastening. Based on our example, it will look like this: Good afternoon. I want to place an order for a frame mosquito net with metal internal fasteners 640x1335 mm in size, without measurements and installation.

Option 2: external Z-shaped fasteners.

External fasteners are considered the most preferable, since the frame mosquito net is located on the outside of the window, and, therefore, the light opening is not reduced and the tightness of the first sealing circuit is not violated. The only drawback may be some restrictions on their use. The ideal option it is considered when the distance from the outer slope to the overlay on the right and left must be at least 20 mm, and from the upper slope to the overlay at least 50 mm. Only at such distances the mosquito net will not occupy part of the light opening. If your window is still recessed into the opening and these parameters are smaller, and there is no desire to install metal fasteners (due to a violation of the tightness of the window), then you can install external fasteners, but
the light aperture will decrease by some amount. In this case, the minimum distances will be considered: on the right and on the left, 10 mm each, on top 30 mm, if the distances are even smaller, then only a specialist can determine the possibility of installation.

Now directly about the measurements. Initially, we measure the light opening, then, focusing on the rules below, we calculate the dimensions of the mosquito net.

A. the distance to the right and left is 25 mm, we add 36 mm to the width of the light opening;

B. the distance to the right and left is 20 mm, but 25 mm, we add 31 mm to the width of the light opening;

B. the distance to the right and left is 15 mm, but 20 mm, we add 26 mm to the width of the light opening;

D. the distance to the right and left is 10 mm, but 15 mm, we add 21 mm to the width of the light opening.

2. Mosquito net height:

A. if the distance is 50 mm, then add 50 mm to the height of the light opening;

B. if the distance is 40 mm, but 50 mm, then we add 45 mm to the height of the light opening;

B. if the distance is 30 mm, but 40 mm, then we add 35 mm to the height of the light opening.

An example of calculating the size of a mosquito net.

The light opening is 620X1335 mm, on the left is the impost (part of the window is 60 mm), on the right from the slope to the overlap is 17 mm, on top - 37 mm.

Since when calculating the dimensions of the mosquito net, the smallest of the available distances from the slope to the overlay is taken, in our case it will be 17 mm. Based on the first rule, 26 mm must be added to the width of the light opening. According to the second rule, 35 mm must be added to the height. Thus, the size of the mosquito net for installation on external mounts is 646x1370 mm, while the light opening will decrease by approximately 15 mm on each side.

We have considered the main nuances of measuring m / s, guided by our rules, you can independently calculate the dimensions of the product you need, order it from our company and install it, while saving up to 400 rubles per sq.m. If you doubt that you have correctly calculated the dimensions or that you can install external fasteners (because for this you need to lean out of the window), then you can always contact our company and order a mosquito net with measurements and installation by the company's masters. In this case, you are insured against any mistake, because. all responsibility falls on our specialists, you can safely continue to do household chores, and we will do what we have been doing for five years - the manufacture and installation of mosquito nets.

This manual is advisory in nature and applies only to mosquito nets produced by our company. In the case of ordering a mosquito net from the Golden Key company without measurements and installation, all responsibility for incorrect measurements, installation errors or size mismatches due to measurement errors lies with the customer.

The recommendations described in this article apply exclusively to profile systems with smooth rectangular or slightly rounded overlays (Aluplast, Brugmann, Rehau, Gealan, KBE, Viva, etc.). For PVC profiles with a sharp overlap bevel (Deceuninck, Thyssen, Foris, Roplasto, etc.), this instruction is not suitable. In this case, it is necessary to resort to the services of the company's specialists. In case it is necessary mosquito net replacement already existing, then the final size will be the size of the existing anti-mosquitoes.

How to measure and install a mosquito net?

accessible and maximum effective way protect your home from annoying insects are mosquito nets. Installing a mosquito net allows you to avoid the use of fumigators and other chemicals to combat annoying insects.

The mosquito net also prevents the penetration of dirt and dust, poplar fluff (which is a powerful allergen) into the premises. The mosquito net will keep pets from falling out of open window. The mosquito net is an aluminum frame, on which a mesh of glass fibers is stretched.

Types of mosquito nets

Frame mosquito nets– classic mosquito net design. A strong mesh is fixed on the aluminum profile, this design is inserted into the window opening. Such nets are convenient and practical, they are usually used if there is no need to constantly open the net. Depending on the method of fastening, they can be stationary and opening. Frame mosquito nets are recommended to be removed on winter period for the longest possible product life. If a large mosquito net is needed, it is usually made with an additional reinforcing bar in the middle.

Door mosquito nets practically do not differ from frame grids, the design is also a lightweight aluminum profile. The main difference between frame and door mosquito nets is the size of the used aluminum profile. Door mosquito nets are larger. Handles are installed on the door mosquito nets for ease of use. Such grids are universal, they can be installed on entrance or attic doors, or on the doors of balconies and loggias.

Roller mosquito nets work on the principle of roller blinds, that is, if necessary, the mosquito net can be rolled into an aluminum box. The design of such a mosquito net includes a guide profile, a net in a roll and a cross bar with handles. Such mosquito nets are the most functional and easy to use. There is no need to completely remove the roller mosquito net for the winter, just twist it. Another advantage of such grids is the ability to close window openings greater width. But, as a drawback #8212; such networks, unfortunately, are short-lived.

Mosquito net with Velcro or tape- the simplest mosquito net, which is mounted on the inside of the sash. If necessary, such a grid is very easily and quickly removed.

We measure the window under the mosquito net

Frame mosquito net on swivel z-mounts is the most popular option among customers. So, in order to independently measure the mosquito net, you need to take a tape measure, paper and a pen. Open the window sash where the mosquito net will be installed. Now we measure the light clearance of the frame in width and height.

Mosquito net width on swivel z-mounts will be equal to the frame clearance plus 20 mm.

Mosquito net height on swivel z-mounts will be equal to the height of the frame clearance plus 20 mm.

Mosquito net attachment types

Mosquito net plunger- the most expensive mosquito net mount, but also the most reliable and stable mount to high wind loads. The plunger is a special metal part with a spring that can be adjusted in length. Plunger fastening is universal for any types of windows.

Fastening "flag"#8212; fastening the mosquito net with small plastic hooks. This mount is less resistant to wind loads.

Mounting on swivel z-pieces- the most popular and reliable mount. Z-shaped elements must fit snugly against the frame, and are additionally fixed to it from the inside of the room.

mount on plastic corners. Such corners are located on the outside. This design does not interfere with the normal opening and closing of the window, and is also easily removed.

Mosquito net installation

Installation of a mosquito net on swivel z-mounts runs in this order.

1. We have a mosquito net fastening inside the room. Fasteners differ in the length of the hook. It is important that the fastener is located with a smaller hook to the bottom, a large one to the top, respectively.

2. It is necessary to take the grid by the side vertical handles. Which can be metal or plastic. We install the grid in the window opening and start large hooks for upper part frames. In this case, the grid must be raised to the maximum height. When you reach the maximum height, you will be able to place smaller hooks on the bottom edge of the window frame. Ready.

Mosquito net fastening with plastic corners differs in that the fasteners are installed on the window frame, and not on the grid as in the previous version.

1. It is necessary to make markings for plastic corners on the outside of the window frame.

2. We fix the plastic corners on the window frame with self-tapping screws.

3. Further installation is similar to the method of fastening with z-shaped elements (first the top edge, then the bottom).

Hide

A mosquito net is an item that is not always installed on windows right away. Sometimes it has to be purchased separately or you need to replace the damaged one. That is why it is important to know how to measure a mosquito net on a window and choose the product that is right for the parameters. Different grids differ in design, and they need to be measured in different ways.

Mesh size definition

If not yet, measuring what it should be is the most difficult thing. To do this, you need to know how to take measurements for a mosquito net, depending on what type you will have. It is not necessary to hire a specialist: you only need to stock up on a tape measure and devote a few minutes to the process.

Dimensions may depend on what type of mounts are installed on them. The product is usually placed from the side of the street, attached to the frame with the help of special metal hooks. Please note that the mesh should completely cover the window opening, slightly going beyond the frame.

Grid size measurement

In order to understand what size should be , you will need to measure the height and width of the window opening. In this case, you need to add the following numbers to each parameter:

How to measure a rod-type mosquito net?

This product model is only available for those windows that are equipped. The mesh is inserted into the recesses that are in the opening when the sash is open. The dimensions of the mosquito nets must clearly correspond to the window.

Mounting types and sizes for them

The frame should not have a strong or rounded bevel, otherwise it will not work to install such a grid.

Before taking the size of the window , make sure it is suitable for this type of mosquito nets. Measurements are simple: you will need to measure the width of the window opening, starting from the outer ledges of the frame. After that, 1 cm is subtracted from each parameter.

The grid during installation should leave a technical gap: it is approximately 5 mm. A sealing brush is inserted into the gap, which prevents debris and insects from entering the gap.

Cases that do not allow the grid to be installed

There are options when the grid cannot be fixed on the window:

Such a problem can be caused by a metal grill located close to the frame. You can get out of the situation only with the help of a rod grid. The roll model will not work due to the large thickness of the box. If the grille is close, the Z-mounts are not always where to place.
Closing the frame with a concrete quarter causes the same problem: only rod mesh will be applicable.
A practically hopeless situation if one of the listed factors is present, while the frame has a large bevel. In this case, the use of a mosquito net will not work at all.

Knowing how to properly measure a window for , You can choose the option that is convenient for you and get rid of insects in the house. You do not need to invite the master for measurements.