Ventilation plant intekh. Ventilation and air conditioning. Stacked and monoblock ventilation system

18.10.2019

Premium class equipment affordable prices from INTECH Ventilation Plant,

Chelyabinsk

The Ventilation Plant of Innovative Technologies is a Russian manufacturer of high-tech energy-saving ventilation equipment of its own design as part of the import substitution program.

Existing on the market for more than 12 years, the INTECH Ventilation Plant is the only organization with a degree of Russian localization of components of more than 80%, of which about 42% are produced by the INTECH Ventilation Plant in Chelyabinsk ( , hulls, etc.). Thanks to this, a firm position was achieved in the market of climatic equipment throughout Russia and abroad. The company is developing steadily and dynamically, investing in improving product quality and optimizing production. We are members of an international ideology GREENTECH– energy efficiency, manufacturability, environmental friendliness.

Wide range of rated voltage: 1-200-277VAC or 3-380-480VAC 50Hz or 60Hz.
Built-in filter for EMC, protection against phase failure and undervoltage in the network.
Built-in protection against overheating of the motor and electronics, as well as protection in the event of a blocked rotor.
Low noise characteristics in low speed mode.
Compact design.
Long service life due to the absence of parts subject to rapid wear, do not require after-sales service.
Minimal energy losses and minimal self-heating, efficiency - up to 90%, significant energy savings - an average of 30%.
The ability to control the fan without additional expensive equipment.
Fast and easy connection.
Does not require service. Has a long service life (>45,000 hours, i.e. 5 years of continuous operation).

Real-time display of the temperature of outdoor air, supply air, exhaust air.
Real-time display of the current state of the unit, operating mode, activation of various elements (heater, pump, air conditioner, etc.), calendar, time.
Flexible setting of temperature, performance, restart order in case of power failure, automatic winter/summer transition (with activation of the relevant operation protocols and protection algorithms).
Protection of advanced settings (more than 100 parameters) with a service password.
Scheduled mode of operation;
Non-volatile status and alarm log.
Sound and visual notification of accidents, failures, service technical. service.
Algorithms of "cold" start, "quick start", warming up the louvre valve, smooth access to operating parameters, maintenance of the set temperature and operating mode, flow compensation as filters become clogged, control of all systems, complete self-diagnosis of units and elements of the unit, necessary and sufficient a set of software protocols for protection against freezing of the water heater, overheating of the internal space, a set of service functions for optimizing the operation of the unit.
Flexible adjustment to the composition and mode of operation of a particular ventilation unit
Removal of the operator panel from the ventilation unit up to 500m.

Russian with 5 years warranty

All INTECH ventilation equipment has Russian GOST R certificates of conformity, expert opinions on the possibility of using it for specialized facilities, declarations of the Eurasian Economic Union. INTECH Ventilation Plant has successfully passed the quality management system certification (ISO 9000:2015). In addition, in 2016, a Declaration of Conformity was drawn up, which made it possible to mark products with the CE mark and make deliveries to the European Union.

is a quality manufacturer
and responsible partner. We sincerely hope for mutually beneficial
cooperation and long-term partnership with you!!!

In 2006, the company's engineers developed and successfully mastered the production air handling units with a rotary heat exchanger, in 2009 a conveyor line for assembling supply and exhaust units was launched, in 2011 the product line was replenished with roof fans, honeycomb humidifiers and air coolers. 2013 was marked by the launch of serial production of channel equipment, the creation of a design department and the formation of professional installation teams.

Today, INTECH is the only production organization in the Ural Federal District, which produces ventilation equipment, including those with heat recovery. Thanks to this, a firm position was achieved in the market of climatic equipment throughout Russia and abroad. The company is developing steadily and dynamically, investing in improving product quality and optimizing production. We are participants in the GREENTECH by Ebm-Papst ideology - energy efficiency, manufacturability, environmental friendliness.

Ventilation equipment of the INTECH brand provides forced replacement of air in the room, cleans it, heats it, cools it, humidifies it, which helps to create a favorable microclimate and solve the problem of increased energy consumption. The capacity range of the serial equipment line is from 100 m3/h to 30,000 m3/h. Non-standard installations are developed according to the instructions of the Customer and do not have any restrictions.

AT ventilation installations mainly European components are used (Germany, Italy). At the same time, recuperators, housings, filters, automation, piping units, flexible connectors, silencers, etc. – are manufactured directly by the INTECH ventilation plant. All equipment has a high build quality, is designed to meet Russian climatic standards, is reliable, durable, and is supplied fully assembled (controller, automation, piping units, necessary sensors). The delivery times of the units are short, and serial models are almost always in stock. The low cost of equipment and an adequate partnership program of the company provide favorable conditions for cooperation.

On the instructions of the Customer, the design department of the plant develops a project for ventilation systems based on INTECH equipment, as well as air conditioning systems, using refrigeration equipment the world's leading manufacturers. Completed professional installation teams have sufficient technical equipment and experience to implement any design solutions. Warranty and service specialists will ensure that ventilation and air conditioning systems are maintained in a technically sound condition, which will greatly increase the period of trouble-free operation of the equipment.

After determining the main tasks assigned to the ventilation system, ventilation system design. A working draft is being drawn up, which describes all aspects of the work of the future system.

Production work on installation and subsequent operation ventilation systems includes several main steps:

conclusion of a contract for the production of works, preparation and development of a detailed design, preparation of premises for work on the installation of ventilation.
production and delivery of ventilation equipment, according to the working draft for a specific room
directly installation of the ventilation system subdivided into indoor and outdoor work
commissioning, adjustment of work installed system ventilation
operational and service maintenance

For the effective and uninterrupted functioning of the ventilation system, it is necessary to carry out timely and full-scale Maintenance and repair of ventilation equipment. All necessary work must be carried out by qualified personnel. Our company is ready to provide you wide range services for the design, development and installation of ventilation systems for various premises.

Natural and artificial ventilation system

Systems with natural ventilation do not provide for the installation of electrical equipment, but function due to natural factors - wind direction and speed, temperature and pressure differences.
The advantages of natural ventilation systems are simplicity of design, low cost, reliability and durability due to the absence of electrical equipment. Therefore, such systems are widely used in typical residential buildings in the form of ventilation ducts. They are usually installed in the kitchen or in the bathrooms.
The disadvantage is dependence on external factors and the inability to adjust the operation of the ventilation system.

The artificial ventilation system is a set of equipment (fans, valves, heaters, filters, etc.). This ventilation system is independent of the conditions environment and is used where there is insufficient natural ventilation.

Supply and exhaust ventilation system

Supply and exhaust ventilation systems are one of the types artificial system room ventilation. supply system provides supply fresh air into the room. If necessary, it can be filtered or heated. The supply ventilation system is able, if necessary, to provide the supply of prepared air to a certain area of the room.

Exhaust system ventilation is designed to remove exhausted, polluted, heated air from the premises. The exhaust system is usually used in conjunction with the supply. At the same time, it is necessary that their performance be balanced so that there is no vacuum or excess pressure in the room.

Local and general ventilation system

The local ventilation system is used to provide fresh air to certain areas of the room (local forced ventilation) or removal of polluted air from areas of accumulation of harmful emissions (local exhaust ventilation) local ventilation It is very effective in cases where the zones of air pollution formation are localized. This system is mainly used in production.

The general exchange ventilation system is used as a rule in domestic conditions and is designed to ventilate the entire room. General ventilation is also divided into supply and exhaust.

Stacked and monoblock ventilation system

The stacked ventilation system is a complex of individual components - filters, fans, a silencer, an automation system, etc. System deployment usually takes place false ceiling or in a separate room (ventilation chamber). The advantage of the system is the versatility of use in various premises from individual apartments to entire buildings. The disadvantage is the complexity of design and installation, as well as the large dimensions of the system.

The monoblock ventilation system is a single soundproof housing that houses all the system components. Such systems can be supply and supply and exhaust. Monoblock air handling units can be equipped with a heat exchanger to save energy. Monoblock ventilation systems have a number of advantages compared to stacked systems:

reduced noise level allows placing low-power monoblock systems directly in residential premises, while stacked ventilation systems are located in ventilation chambers or utility rooms.
since the selection of components, their testing and debugging take place at the production stage, the monoblock ventilation system is most efficient.
also significant advantages of a monoblock system are small dimensions and simplicity and low cost of installation.

Conditioning

The air conditioning system is an integral part engineering systems structures for civil or industrial purposes. There are two main types of air conditioning:

air conditioning by cooling the air entering the room through the ventilation system. The principle of operation is that in some of the elements of the ventilation system (in the supply and exhaust unit or air duct) a cooling section is installed connected to the refrigeration unit (chiller, outdoor unit air conditioner, compressor and condenser unit)
air conditioning with indoor units installed in the room, which are connected to one or more outdoor units (outdoor unit, multi-split system, chiller). At the same time, the ventilation and air conditioning systems are not connected in any way.

Structurally, all air conditioners are divided into two main types: "monoblock" and "split systems". Split systems consisting of three or more units are called multi split systems.

Monoblock air conditioners They are a single housing in which all the elements are located, which in turn simplifies the design and reduces the cost of the unit. An example monobloc air conditioners mobile, roof, window conditioners serve.

Split systems are two blocks, indoor and outdoor. They are interconnected by an electrical cable and copper pipeline through which the refrigerant circulates. This design allows you to take out the most overall and noisy part of the air conditioner containing the compressor. The indoor unit is easily placed in any convenient place in the room.

Modern split systems are equipped with remote controls remote control, with which you can program various modes of operation of the air conditioner: set the required temperature, air flow direction, turn-on time, operation and shutdown, and much more. Also, the advantage of split systems is a wide choice various types indoor blocks.

The following options differ: channel, wall, ceiling, column, cassette internal blocks. At the same time, only wall-mounted air conditioners are domestic, all other modifications are semi-industrial units.

Unlike split systems in multi split systems to outdoor unit several internal ones are connected. Moreover, they can differ not only in power, but also in type. Each indoor unit has its own control panel. Contrary to popular belief, replacing several split-systems with one multi-split system does not at all lead to a cheaper project, since labor intensity and installation costs increase due to long communications. In addition, if the external unit fails, all internal ones stop working. Therefore, the use of a multi-split system is marked by limited possibilities for placing external units.

Multi-split systems, in turn, are divided into fixed and type-setting. Fixed multi split systems are ready-made kits. You cannot change the quantity or type of this equipment. As a rule, these are household systems with two or three indoor units. AT type-setting multi-split systems it is possible to pick up several different indoor units (4-5 pieces) for the external unit. The limitation is only in terms of quantity and total power. Such systems are semi-industrial. Systems in which the number of indoor units exceeds 5-6 pieces are industrial multizone (VRV or VRF).

An alternative to multi-zone air conditioning is chiller-fan coil system which is widely used in large buildings. The location of the outdoor unit (chiller) on the roof simplifies the installation of the system and does not damage the facade of the building. Chiller - refrigeration unit designed for the preparation of cold or warm water which in turn cools or heats the room. The heat agent is a liquid prepared in the chiller and supplied to the fan coil units through pipelines. Fancoil - this is an indoor unit consisting of a heat exchanger, fan, filter, control panel. Cold or warm liquid flows from the chiller to the fan coil, which carries out heat transfer with the air entering it, warming or cooling it to the desired temperature.

InTech specialists are ready in a short time to prepare air conditioning project, select necessary equipment and implement installation of the air conditioning system according to your wishes.

The history of development. In 2006, the company's engineers developed and successfully mastered the production of supply and exhaust units with a rotary heat exchanger, in 2009 a conveyor line for assembling supply and exhaust units was launched, in 2011 the product line was replenished with roof fans, honeycomb humidifiers and air coolers. 2013 was marked by the launch of serial production of channel equipment, the creation of a design department and the formation of professional installation teams.
To date, INTECH is the only manufacturing organization in the Urals Federal District that produces ventilation equipment, including those with heat recovery. Thanks to this, a firm position was achieved in the market of climatic equipment throughout Russia and abroad. The company is developing steadily and dynamically, investing in improving product quality and optimizing production. We are participants in the GREENTECH by Ebm-Papst ideology - energy efficiency, manufacturability, environmental friendliness. Ventilation equipment of the INTECH brand provides forced replacement of air in the room, cleans it, heats it, cools it, humidifies it, which helps to create a favorable microclimate and solve the problem of increased energy consumption. The capacity range of the serial equipment line is from 100 m3/h to 30,000 m3/h. Non-standard installations are developed according to the instructions of the Customer and do not have any restrictions. Mostly European components (Germany, Italy) are used in ventilation units. At the same time, recuperators, housings, filters, automation, piping units, flexible connectors, silencers, etc. – are manufactured directly by the INTECH ventilation plant. All equipment has a high build quality, is designed to meet Russian climatic standards, is reliable, durable, and is supplied fully assembled (controller, automation, piping units, necessary sensors). The delivery times of the units are short, and serial models are almost always in stock. The low cost of equipment and an adequate partnership program of the company provide favorable conditions for cooperation. On the instructions of the Customer, the design department of the plant develops a project for ventilation systems based on INTECH equipment, as well as air conditioning systems, using refrigeration equipment from leading world manufacturers. Completed professional installation teams have sufficient technical equipment and experience to implement any design solutions. Warranty and service specialists will ensure that ventilation and air conditioning systems are maintained in a technically sound condition, which will greatly increase the period of trouble-free operation of the equipment.

The main activity of the INTECH Ventilation Plant is the production and sale of energy-saving ventilation equipment of its own design. In addition, INTECH offers refrigeration equipment from the world's leading manufacturers for complete equipment of the Customer's facilities, provides services for the design, installation and commissioning of ventilation and air conditioning systems, as well as performs warranty and post-warranty service.

To date, INTECH is the only manufacturing organization in the Urals Federal District that produces ventilation equipment, including those with heat recovery. Thanks to this, a firm position was achieved in the market of climatic equipment throughout Russia and abroad. The company is developing steadily and dynamically, investing in improving product quality and optimizing production. We are participants in the GREENTECH by Ebm-Papst ideology - energy efficiency, manufacturability, environmental friendliness.

Mostly European components (Germany, Italy) are used in ventilation units. At the same time, recuperators, housings, filters, automation, piping units, flexible connectors, silencers, etc. - are manufactured directly by INTECH ventilation plant. All equipment has a high build quality, is designed to meet Russian climatic standards, is reliable, durable, and is supplied fully assembled (controller, automation, piping units, necessary sensors). The delivery times of the units are short, and serial models are almost always in stock. The low cost of equipment and an adequate partnership program of the company provide favorable conditions for cooperation.

Ventilation Plant INTECH is a quality manufacturer
and responsible partner. We sincerely hope for mutually beneficial
cooperation and long-term partnership with you!!!

Favorable conditions for cooperation are provided for dealers.