doors 

How to inflate a mattress with a built-in foot pump. An air mattress with a built-in pump: what you need to know about the device, the nuances of operation. Inflating the mattress with a large trash bag

Inflating air mattress with built-in pump. We will need the mattress itself, an electric pump and the nearest outlet.

We bring the product into a heated room with an air temperature of at least 15 degrees. The mattress does not tolerate cold and close proximity to heat sources.

We lay the mattress on a flat surface, there should be no sharp objects on it so as not to pierce the product. Protect the bottom of the mattress strong foil or tarpaulin.

The product must not be exposed to direct sunlight. If an increase in ambient temperature is expected, the air should be released slightly. Do not pump the product to avoid damaging it. We make sure that the mattress does not wrinkle and does not bend.

Inflating is carried out until the mattress becomes embossed. So its seams will not be damaged, and when falling asleep and lying on it, the owner of the mattress will experience maximum comfort.

From time to time, the air pressure is checked, if several people are sleeping or lying on it, then perhaps the mattress should be “lowered” a little. To deflate it, simply open the valve.

The mattress does not always include a built-in pump. Can be used alternative ways inflation, such as a foot or hand pump. Do not pump the mattress with a compressor from a car or other devices with high pressure. Do not inflate the product more than 85% volume.

If there is no pump, then you can inflate the mattress with a hairdryer, vacuum cleaner and even a bag

Methods and improvised means

We use a vacuum cleaner

We take a vacuum cleaner, connect the thin nozzle of the device to the outlet and connect it to the mattress hole. We turn on the device and wait until the mattress is inflated to the desired stiffness.

Inflating the mattress with a hair dryer

This is done quite simply. We turn on the hair dryer in the outlet, turn on the " cold air and start downloading. This method is longer than inflating with a built-in or conventional pump, but also effective. The main thing is not to inflate the product with hot air, which can damage the product.

Inflating the mattress with a large trash bag

This method of inflating is very convenient in nature, in the country or in cases where you accidentally forgot the usual nozzle at home.

We take a dense bag for garbage with a large volume. It must not be damaged. We open the inlet valve on our mattress, fill the bag with air, adjust both necks in diameter. We lie down with the body on the bag, distilling the air from the bag into the mattress. We continue such manipulations until the mattress is completely inflated.

How not to do?

What if there was nothing at hand? You could use your lung power to inflate the mattress with your mouth. Such manipulations are easier for a man to perform, but if there are a couple of strong guys nearby, then together it will take 15–20 minutes. It is better to abandon this method and save your lungs.

If there is a car nearby, you can use the exhaust pipe to inflate the product. With this method, it is easy to inflate not only the mattress, but also the children's pool and inflatable boat For fishing. It is enough to build an adapter and start inflating. The disadvantages of this method are that exhaust gases and carcinogens destroy the product from the inside and seep to the surface, causing harm to health.

The first air mattresses appeared in 1940. They were made from a special fabric impregnated with vulcanized rubber. Currently, inflatable furniture is very popular. After all, it is convenient to use it in suburban trains and hiking trips. Often it is used as a full-fledged sleeping place in the country. The air mattress does not take up much space, is easy to clean and does not require complex maintenance.

Pumps

Expensive models have a built-in electric pump. But this configuration is not provided for all models. Therefore, mattress owners have to use a foot or hand pump low pressure. A car compressor is not suitable for this process. From high pressure the mattress may burst. As soon as the product acquires the desired relief, the process can be stopped.

Security measures

The mattress must be brought into a heated room with a temperature above 15 degrees. It must be placed on a flat surface away from heat sources. There should be no sharp objects on the floor. It is better to protect the bottom of the product from possible damage with a tarpaulin or foil. The air mattress should not be exposed to direct sunlight. Do not stand on the product. When the temperature rises, it is better to release some air. The air mattress cannot be wrinkled and bent.

How to inflate an air mattress without a pump

If the pump is not at hand, you can use other methods to inflate the mattress. How to inflate a mattress without a pump? The most obvious way is to use your lungs. But it will take a lot of time and a few strong guys. You can use the exhaust pipe of the car. But exhaust gases are not very useful and can damage the surface of the mattress.

Vacuum cleaner

How to inflate a mattress without a pump? The mattress can be inflated and deflated using a vacuum cleaner. Everything is simple here. A thin nozzle from the device is attached to the mattress hole, the vacuum cleaner turns on and inflates the mattress. Do not inflate the product more than 85 percent of its volume.

hair dryer

The main thing is that the hair dryer fits the valve of the air mattress. It is necessary to turn on the "cold air" mode and pump up the product. Hot air may damage the air mattress. This method is effective, but takes some time.

Garbage bag

This method is convenient to use in nature or in the country. It needs a large, dense package. It is filled with air and connected to the mattress inlet valve. Next, you need to lie on the bag, distilling air from it into an inflatable product. The procedure will have to be repeated several times.

There are a considerable number of alternatives to a regular bed, among which air-filled mobile options are particularly popular. The only difficulty that users face in practice is the search correct option how to deflate an air mattress. The actual difficulty lies not in the removal of the bulk of the air, but in its complete elimination from the cylinders.

You can pump up using a manual or electric pump, and it takes time and effort not a large number of. Here, too, there are individual features, but it is not easy to notice them when performing a task.

Peculiarities

To quickly deflate an air mattress, you will need to adhere to a whole range of requirements. But at the very beginning, the surface is prepared for storage. To do this, the material is cleaned with a soapy solution without aggressive chemical cleaners. The surface of the product dries up to the end on its own without the use of all kinds of heaters.

Particular attention is paid to the valves on the mattress through which air is released. There are 3 options for these products:

  1. Classical. First, the product protection is unscrewed, after which the valve is slightly compressed to allow air to escape. A common variant of the technological solution due to the combination of simplicity and reliability.
  2. Bicycle. The valve is squeezed from both sides with your fingers or with the help of a match we press on the nipple in the central part. The product is twisted by two or more people, because it is impossible to do it alone.
  3. Removable. This valve model stands out for its simplicity among analogues, because to activate it is enough to unscrew the plug, after which the mattress itself deflates as quickly as possible.

A single product is deflated in 10-20 minutes, after which it is packed in a special bag or other design for later storage. It is impossible to leave an air mattress in direct sunlight, because this leads to its rapid deterioration.

Before we get interested in how to blow air through the valve from an air mattress, we will take care in advance to eliminate popular mistakes.

Mostly people in such a task make the following inaccuracies:

  1. Surface. It should be as even as possible, because this will eliminate even a slight retention of air in the product.
  2. Items. When blowing off, the likelihood of punctures and cuts is especially high, so sharp objects must be removed away.
  3. Heaters. Heat sources deform the rubber base of the product, so it is advisable to move them away from the assembly site.
  4. Minus. Negative temperatures destroy rubber and a number of other materials, which is why they should not be in the room.
  5. Pumps. Only special models with low pressure are used, because in this case ideal air removal is ensured without damaging the elastic structure.

Avoiding them is quite simple if you prepare in advance and take your time. Each air mattress, before being sent to storage, is carefully inspected for damage and stuck objects, so that when waiting for the next use, the condition of the product does not worsen. In this case, the result is always expected.

How to deflate an air mattress

To deflate as quickly as possible, you will need to follow a simple instruction. The process is carried out in strict accordance with the plan described below:

  • valves are initially opened to allow air to escape under its own weight;
  • then the mattress is twisted to concentrate the air around the valves;
  • when there is nothing inside the cylinders, the air mattress is folded for later storage in a special bag or box.

It is impossible to make an effort or try to increase the speed, because the air itself comes out as quickly as possible. Therefore, haste is likely to damage the product. Next, the mattress is removed for storage, and subsequent inflation will not bring surprises.

How to deflate with a pump

If you are wondering how to blow off an air mattress with a pump, then here the process is much easier and faster. After preparatory work and deflate under its own weight, the following series of steps are taken:

  • the pump is connected to the valve, and the remaining holes are clogged (some models use 2 or more valves);
  • air is removed with the help of traction;
  • the pump is detached and the product is folded for storage.

Properly blowing off the mattress will allow you to get the perfect result without wasting time and effort. In addition, the design will remain in perfect condition, making it possible to use in the future without the slightest fear.

Recently, inflatable sleeping mattresses with a pump are in increasing demand. They have ceased to be associated exclusively with an attribute for outdoor recreation and have acquired a wide functional purpose.

Advantages of a sleeping air mattress with a pump

The air mattress is great alternative and has the following advantages:

  • compactness. If necessary, the mattress can be deflated and removed at any time. In this state, it takes up minimal space. It is irreplaceable as a spare furniture option in case of arrival of guests. It can't be compared to bulky folding beds that take up a certain amount of space when stored and do not deliver comfort during sleep. Also, such a mattress will be a real find for owners of a small living space;
  • possibility of transportation. This will allow you to use the mattress to perform its traditional function, which everyone is used to - for tourist trips with an overnight stay or;
  • air mattresses with built-in pump are characterized by convenient valve allowing, if necessary, to quickly inflate and deflate the product;
  • extremely light weight, which does not exceed 7 kg;
  • attractive design.

Air mattress Intex with built-in pump

Intex air mattress with built-in pump is very popular. This is due to its high quality, which is achieved by using a special advanced Fiber-Tech technology in its manufacture. It consists in the use of heavy-duty vertical fibers to produce the internal structure of the mattress. They do not stretch over time, which ensures a long service life of the product. The mattress is distinguished by increased comfort, which is explained by its design and the use of a high-quality and pleasant coating that resembles velor.

Reading 6 min.

The use of air mattresses is convenient and comfortable. For home use air beds are popular, especially if you need to accommodate guests.

On vacation, air mattresses are used as floating devices or placed in a tent for sleeping. It is enough to inflate with air and the device is ready for use.

Device

The inflatable mattress for sleeping, as well as for swimming, is made of vinyl. The advantages of the material in strength and durability. To prevent slipping of bed linen, top part made from flock. Flock - anti-slip and waterproof material. Water resistance is a mandatory feature of inflatable sleeping furniture. Due to this quality, liquid does not get inside the product.

The product consists of independent sections. Sections provide rigidity and safety on the water. If one section is damaged, the structure will not completely deflate. The remaining sections will be inflated and ensure safety on the water.

Plugs are required for safe use on the water and at home. Closing plugs are less effective and safe than roll-on plugs because they can pop out and deflate the mattress. This will not happen with screw caps.

Types and differences

The range of products includes a large number of models of different sizes.

According to their purpose, air mattresses are divided into:

  • sleeping products;
  • swimming;
  • universal.

Sleeping air beds differ in size. Height from twenty-two centimeters. There are one-bedroom, one-and-a-half or two-bedroom. Models of this type are distinguished by waterproof velor (flock) on one side.

Inflatable mattresses for swimming have height dimensions from twelve to twenty-two centimeters. It happens double, one and a half or single. The slippery material from which the mattress is made is used only in water bodies.

Universal models are used for swimming or temporary sleep (not used as a permanent bed). They have a flock coating on the upper surface.

Plug type:

  • screw plugs;
  • push-in plugs.

The former are used for inflatable furniture and beach mattresses.

The second is only for beach mattresses.

For pumps:

  • built-in pumps;
  • without pumps.

Mattresses with a built-in pump are more convenient, due to the speed and convenience of preparing for operation. The pump is located inside the structure. It is enough to connect the electric pump to the network and turn it on. The pump itself pumps up the product to the required volume.

Products without pumps inflate on their own or buy a pump. Self-inflating takes a lot of time and effort. But this method does not require financial expenses.


By type of motor power:

  • working from the mains;
  • mechanical (divided into manual and foot).

Electric blowers quickly (within one to three minutes) and without physical costs cope with the task. However, they are more expensive.

To pump up with a mechanical device, it will take more time and effort. This type of supercharger is cheap.

Application

Air mattresses are used for sleeping and for swimming.

Products for permanent sleep with a height of twenty-two centimeters. The higher the mattress, the more comfortable it will be for sleeping. Such air beds are an alternative to stationary ones. Cheaper than fixed beds. The advantage of such devices is the ability to assemble an air mattress at any time and free up space in the room.

This bed is used for an extra bed in case of arrival of guests. When folded, it takes up space like a shoe box, and when inflated, it turns out to be a full-fledged single or double mattress.

The mattress is used on the beach. For this purpose, models with a height of twelve centimeters are chosen. Thanks to the range of sizes, a mattress is selected for three, two or one person.

How to choose an air mattress with a built-in pump?

To select a model that will last more than one year, you must familiarize yourself with the selection criteria.

Rules for choosing air mattresses with a pump:

  1. A good product is worth the money. In the manufacture of such a mattress, high quality materials are used, and they are not cheap. When using the mattress, remember that the material is in contact with the body. Hypoallergenic material is used to reduce the risk of allergic reactions.
  2. Machine-made mattress. Machine assembly is more expensive than manual assembly. The advantage of machine assembly in strength and reliability.
  3. frame in the product. The frame is responsible for the strength and orthopedic effect. Provides comfortable sleep and proper load distribution. The spine is properly supported. The presence of the frame is checked by pressing on the edge. If the edge is elastic when pressed, then there is a frame.
  4. PVC material with velor coating. During operation, this material does not cause discomfort. And the velor coating does not allow the linen to slip. The material is durable, withstands loads and is used in water or for sleeping.
  5. Case. Prevents product from contamination. In a case, the product lends itself better to transportation.
  6. Electric built-in pump. This type of pump will fill the mattress with high quality air. If necessary, the pump will quickly cope with its task. Inflates or deflates a mattress in two minutes. When pumping up, the leg gets tired, and several times more time is spent. A foot pump pumps air longer than an electric one.
  7. surface density. The characteristic of the product is a dense and even surface, ensuring reliability and comfort of use.
  8. Convenience. This is an important selection point. After all, well-being throughout the day depends on convenience. To determine this indicator, a smaller rib is visually tested. A quality product has a hard edge.


After reviewing the product selection criteria, the user will acquire a high-quality, reliable mattress that will last for many years.

Common Models

To date, the market of air mattresses represents a large number of models. A common manufacturer is Intex. Proven for years and providing wide range of products. The company's products are made from quality materials and have affordable prices.

The range has such common models:

  • SupremeAirflow. A complete single double bed with built-in pump and carrying bag. The height of 51 centimeters provides comfort and protects against drafts during sleep;
  • differs by a double longitudinal partition. The bottom layer is the frame, the top layer is the mattress. Weight-8.1 kilograms. Height 42 centimeters;
  • weight 11.4 kilograms. Height 46 centimeters. Differs in a velor covering of all surface;
  • the headboard and partition provide additional strength and comfort of the structure.

At right choice manufacturer and model, the inflatable product will provide a comfortable sleep and save money. The inflating built-in device allows you to quickly pump up the bed. Even a child can pump up the bed.