Open the door 

Plastic palm from bottles. Do-it-yourself palm tree from plastic bottles step by step with photos and videos How to make a palm tree from plastic bottles step by step

School of practical people. Master class making a beautiful and beautiful palm tree with your own hands from plastic bottles.
New technologies and innovations bring a lot of good things to people's lives, make it easier and more beautiful. But with this new thing, something bad comes into our lives.
A plastic bottle is an example of the above. This thing was developed in 1941. The plastic bottle has conquered the whole world. It is very popular for a number of its positive qualities:
- cheap material
- very technical
- ease of operation,
- can be reused at home.

Unfortunately, the plastic bottle also brought bad moments:
- the period of decomposition in natural conditions is more than 100 years,
- during decomposition and combustion, dangerous and harmful substances are released.

Over the past summer season, our family has accumulated a lot of plastic bottles. In the fall, they began to think about where to throw them away, how to take them to a landfill. The youngest daughter came up with a brilliant idea to leave plastic bottles at home and make something beautiful and original.
Everyone liked the idea of ​​the daughter. On the Internet, we reviewed a lot of crafts. We settled on the idea of ​​making a palm tree.

Stage #1
Collect as many as possible plastic bottles. The color is green (from under the Sprite). The color is dark brown (from under Kvass or Beer). A huge amount is needed. Immediately ask for help from neighbors and friends. You will certainly be helped in difficult endeavors.

Stage #2
Think carefully about what height and size your palm trees will be, how many palm trees will be, where you will install.
We, personally, to begin with, make one tall palm tree.

Stage 3
We tear off all stickers and product labels. Rinse dirty plastic bottles gently in hot water.

Stage 4
Sorting plastic bottles. So it will be easier and more comfortable to work. We start with brown bottles. Set aside the green ones, let them not interfere. We will use them later.

Stage number 5
Let's start making a powerful and reliable trunk. We take plastic brown bottles. Carefully cut off the bottoms of the bottles. Then we take a drill with a nozzle. We make holes in the center of the bottoms on a hard surface. We take armature. We string the blanks on the reinforcement one by one.




Stage #6
We bring green bottles from the warehouse. From them we will make the leaves of our exotic palm tree. For this procedure, we need sharp scissors and a knife. Carefully cut off the bottom of the plastic bottle. Throw away. Cut the rest into long strips.


Stage number 7
We mount and securely fix the workpieces on iron fittings. The length of the fittings depends on the number of bottles and the size of the palm tree.



Stage #9
Final stage. We securely install all structural elements. Iron fittings are securely fastened to each other. We invited a welder neighbor. Five minutes of work. Here she is. Our beautiful palm. Reliably mount finished structure. Pour cement mortar into the pit, install a palm tree, fix it with twine.
Our family decided that three gorgeous palm trees will soon grow in front of our house. We have the Bahamas all year round. See photo No. 8. Our palm trees delight all neighbors, make them stop all pedestrians and drivers, take pictures of beauty and tell friends about a miracle!!!

A palm tree made of plastic bottles will take its rightful place on your personal plot and will delight the eye at any time of the year. Manufacturing plastic tree- the lesson is not difficult, the main thing is to find a sufficient amount of material. We offer step by step instructions for beginners how to make a palm tree from plastic bottles.

Step by step guide: How to make a plastic palm tree

First you need to prepare the materials. You can use brown and green bottles or clear ones and then paint them. You will need:

  • Plastic bottles of various sizes
  • Wooden stick or reinforcement for the frame
  • Tight rope or wire.

Conditionally palm making can be divided into three steps:

  1. Making palm branches
  2. Creating a tree trunk
  3. Combining all parts into one tree.

Step 1 . To keep the leaves wide, use two-liter green bottles. To do this, cut off the bottom of the bottle and cut the bottle lengthwise into 7 pieces. Give each leaf a suitable shape and make a fringe. For one leaf, you will need about 10-15 bottles. Connect them through the neck with a rope or wire. You can make small cuts along the bottles, then the leaves are more fluffy.



Step 2 To make the tree trunk, you will need brown beer bottles. Now you have to cut off the neck, and work with the lower half-bottom. Make triangular cuts on each blank from the bottle, then gently bend the edges outward. In the center of the bottom, you will have to burn a hole with a heated metal rod, the diameter of which depends on the diameter of the base for the frame. The number of bottles depends on the desired height for your tree. Insert them one into one on the frame, and you get a trunk.

Step 3. Now you can proceed to the full assembly of the tree. If you strung the leaves on a metal cable, then you can simply weld them to the trunk. To prevent the palm tree from flying away, make a foundation and dig deep into the core-trunk. Try to make a small palm tree first, and then plant some more plastic trees next to it.

Palm tree from plastic bottles

Imagine, then your tree will be unique, and the site will be the most beautiful. Involve family members in the preparation of blanks for palm trees, then you will spend interesting leisure time together. We hope that our article is about how to make a beginner palm trees from plastic bottles was useful and your backyard area will change significantly.

The following method of forming a palm tree from plastic bottles with a step-by-step algorithm of actions is original.

Work begins with the laborious process of assembling the barrel:

  • You will need a third of the plastic container, cut off from the side of the neck.
  • All blanks are cut into 8 parts, leaving a small area near the base untouched.
  • In order for the palm trunk to have a scaly surface, each segment is bent outwards.
  • The use of the bottom of the container will help to reduce the waste of plastic bottles. To do this, at the bottom with a hot knife, you need to make a hole of a suitable diameter. Otherwise, the process of forming blanks is identical to the algorithm described above.

Palm leaves can also be made in other shapes. The crown will be presented in the form of wide foliage resembling a fan. For it, you can use a plastic container of green and yellow color.

Comment! The splendor of the crown directly depends on the number of leaves from the bottles, and their width - on the size of the containers.

It is better to make the crown of a tall palm tree from a 5-liter container; for a medium-sized plant, 1.5-liter containers will be enough. Cutting the leaves of the fan is quite simple:

  • on plastic container the bottom is removed;
  • the bottle is cut lengthwise into 3 parts;
  • each segment is rounded at the end;
  • the petals are cut with a fringe on both sides, in the middle there remains a narrow untouched strip about 1.5 cm wide;
  • splendor is achieved by bending the fringe in different directions.

In conclusion, the elements strung on the cable and fittings are fastened together.

Third option

Another way involves creating a palm tree using the bottoms of plastic bottles. It should be noted that much more will be required for such a copy of the container.

Crown design step by step:

  • On each bottom, it is necessary to make a hole that corresponds in diameter to the prepared base. The work is done with a hot knife or drill.
  • Blanks from green bottles are strung on a hard cable.
  • The edges of the wire are secured with caps to keep the parts in place.

For a palm tree trunk, you need a log with the appropriate diameter. The bottoms of brown bottles are stuffed onto it with overlapping nails. The result is such a miracle palm tree:

The video tutorial will present another way to make an attractive specimen of an exotic plant for decorating the site.

Every gardener dreams of making his garden well-groomed and beautiful. But it is much easier to cope with the task of landscaping than with its decoration, because garden decor is expensive and does not always look appropriate. Yes, and why the extra spending, if the material for the original craft is right at hand. In this article we will tell you how to make a real masterpiece out of a plastic bottle and what you need in order to make a truly exotic decoration for the garden - a palm tree.

Crafts for giving, what you need to create a palm tree

A plastic bottle is a practical and multifunctional thing with which you can turn your garden into a "decorative museum". Anyone who says that this is "garbage and bad taste" simply did not see it for real good crafts for the garden, made by hand. Hand-made is not only fashionable, but also in demand, because what is done with one's own hands is valued many times higher than factory items.

Really inexpensive and available materials a lot for country crafts. But among them, plastic bottles are leading in terms of practicality, durability and unpretentiousness.

Decorative elements for the garden, made of plastic bottles, not only attract admiring glances with their non-triviality, but also have an unlimited shelf life - they are not afraid of either snow or heat.

Did you know? The plastic container maintains temperature range from -40 °C to +200 °C.

In addition, plastic bottles are like plasticine in the hands of a sculptor - malleable, elastic, and allows you to do almost everything with you.

In order to make a palm tree from bottles, you will need:

  • plastic bottles of several colors;
  • sharp knife (clerical or construction) and scissors;
  • adhesive tape and / or construction glue;
  • barrel base (metal pin or hollow plastic tube);
  • strong rope;
  • wire.
For trunks and leaves, you need to select bottles of the same size so that ready product looked complete. To achieve maximum realism of a decorative palm tree, you should look for material in green and brown, but this is not at all necessary.

Instructions for making leaves

At first glance, it may seem that making a tree from plastic bottles with your own hands is very difficult. But if you act in stages, it turns out that it is not only easy, but also very exciting.

First of all, let's start making the crown of a palm tree. Take a plastic bottle and cut off the bottom, about 1/3 the length of the bottle. The bottom will no longer be useful, and the part with the neck will become a blank for foliage. Palm leaves can be of two types: fluffy and tulip-shaped. In the first case, using a clerical knife or scissors, we make longitudinal cuts towards the neck, without cutting 3-4 cm to it. The width of the strips can be arbitrary, but the crown of small leaves looks most spectacular.


The second version of the leaves is made in the following way: the blank is cut into four equal parts (cuts towards the neck of the bottle); we bend each of the parts and with the help of scissors we give the shape of a needle-shaped, figured sheet.

How to make a palm tree from bottles, the first or second way - Decide for yourself, it's a matter of taste. Ready leaves will need to be collected into a branch. To do this, take a rope or cable and alternately string all the workpieces in one direction so that the neck enters the cavity of the previous bottle. About 5-7 finished blanks will take one branch of a palm tree. Be sure to screw the cork onto the neck of the first “sheet” - this is necessary to fix the rope. Remember to leave a long edge so that you can collect all the branches together later.

Important! If you have a child, and the palm tree will be within his reach, then the edges of the slices of plastic bottles should be melted so that the baby does not get hurt.

How to create a trunk for a palm tree

We proceed to the next stage of making palm trees from plastic bottles - stem assembly.

The trunk of a palm tree can also be made in several ways, and here are some of the best ones:


Did you know? One of the palm-record holders is decorative tree, the trunk of which reaches 4.5 m in height.

Connection of the trunk and crown of an evergreen tree

The final step in assembling your craft will be the connection of the finished parts: branches and trunk. This is a very important and crucial part, because the stability of the entire structure depends on how correctly everything is done. We will tell you how to make a tree from plastic bottles safe and reliable.

Here on help will come the rest of the inventory: adhesive tape, construction glue and wire.


To begin with, we connect the left edges of the rope on which the leaves were strung into a bundle and wrap them with tape. If additional fixation is needed, we tie the branches of the leaves with wire, wrapping it around the bases of the necks. The resulting beam is connected to the tree trunk with glue (or construction foam). If necessary, at the junction, we make a few more skeins of tape.

Today, the owners of cottages and household plots are trying in every possible way to decorate the exterior. There can be many ways, starting with landscaping and ending with some kind of buildings. One of the most budget options can be called from plastic bottles. In this article, we will tell you how to make a palm tree for your backyard from plastic bottles.

Materials for palm trees from bottles:

  • green and brown plastic bottles;
  • scissors;
  • Metal sheet;
  • metal rods;
  • metal bushings and tubes;
  • high voltage cable.

1. Prepare the bottles in advance and clean them from the labels. Start by making palm leaves from green bottles. To do this, cut the bottle in half.

2. Cut the strips on the top of the bottle lengthwise but not all the way through.


4. For one palm tree, you will need 7 palm leaves, the length of which you can adjust yourself.
5. To make a barrel, take brown bottles and cut wide strips on them. You should get 6 wide strips along the entire bottle of 2.5 liters.
6. Also string blanks for the barrel onto a high-voltage metal cable.
7. Start preparing the base for the palm tree.


8. Weld two metal rods (at least 25 cm long) onto a sheet of metal. The rods need to be welded at different angles.
9. Take tubes with a diameter of 2 cm, put them on the rods. Weld metal bushings onto the end of the rod so that later palm leaves can be passed through them.



11. Start assembling the barrel from the bottom up.


12. After the entire palm structure is assembled, bury it in the ground to a depth of 0.5 m.

Do-it-yourself palm tree from plastic bottles ready, now you can create a whole piece of paradise in your backyard. Do not be afraid to fantasize, palm trees can be of any size, and instead of coconuts, attach bright plastic bottles for juice or sweet water.

You can also come up with your own own scheme palm trees from plastic bottles.
The first plastic bottle was developed in 1941, and today it is used not only for household purposes and for storing water, but also as a convenient and inexpensive material For .