Porch 

DIY faucet with backlight. LED nozzle on the faucet: original decor for the mixer. Top Reasons to Buy LED Faucet Heads

No one will argue with the fact that the main purpose of the mixer is metered mixing hot water cold and serving it to the consumer. But in addition to their direct purpose, modern mixers also carry a serious decorative load. The LED nozzle on the faucet with water illumination appeared relatively recently and immediately won many fans, but in addition to beauty, it also turns out to be a very useful addition.

Illuminated aerator

Initially, it should be noted that the aerator is usually called a small device that is screwed onto the tap outlet. Traditional designs consist of a threaded housing for mounting, several sealing gaskets and, of course, a simple filter system.

Passing through such a device, the water is enriched with air, as a result you get a soft foamy jet. Although visually the change in pressure is almost imperceptible, thanks to this innovation, savings can reach up to 50%. The most valuable thing here is that the user does not notice any changes at all, a decrease in pressure will be noticeable only when it is necessary to gain some kind of capacity.

One of the latest trends in newfangled plumbing can be considered a relatively recently appeared backlit aerator. This design has incorporated all the advantages of a traditional aerator, plus it is also able to signal with colored LEDs about changes in the water temperature in the system.

Advantages and installation

At first glance, this device may seem like an ordinary beautiful toy. Nevertheless, the happy owners of such an aerator note its serious practical benefits.

Advantages of the LED nozzle

  • As mentioned earlier, such a nozzle saturates the water with oxygen, as a result, chlorine compounds are displaced and the aerator filters retain small debris. Plus, the jet acquires a clearer direction, the water no longer splashes around, but flows into the sink calmly with a soft, pleasant rustling.
  • Families with small children will fully appreciate the advantages of the highlighting attachment.. To children, the illumination of water in the tap seems like a small natural miracle. If your child does not like to wash his face or wash his hands, the luminous stream can change the situation radically. Up to the point that you have to forcefully pull your child away from the luminous crane.
  • Owners of apartments equipped with columns know that the heating in the system is highly dependent on pressure and pressure.. Often a situation arises when, while taking a shower, the temperature of the water rises. The LED nozzle will help you avoid discomfort. You will no longer stand under a shower with a red jet.

  • A large role in the popularization of this device was played by relatively affordable price . On average, you will have to pay from 3 to 10 dollars for such a nozzle, you see, this is not so much money.
  • To mount this nozzle, you do not even need to call a locksmith. This device is quite within the power to install with your own hands to any person.

Important: although such structures are often made of brass and chrome-plated, not enough quality tap water does its job.
With regular use, all such nozzles are recommended to be cleaned at least once every six months.

How it works

Don't worry, you won't need to run additional wires to the faucet or change batteries regularly. The design of such an aerator is simple and at the same time ingenious. The fact is that the LEDs and the thermal sensor themselves do not require too much energy, which is why the power plant has such tiny dimensions.

To put it simply, the body of the nozzle is at the same time a small hydroelectric power station. It has a small turbine built into it. When the water is turned on, the turbine starts to rotate and generate enough power to run the LEDs and electronics. When you close the faucet, the energy stops being produced, naturally the LEDs go out.

The temperature control sensor regulates the order in which the LEDs of a certain color are turned on. The color palette may vary depending on the cost of the unit and the manufacturer. But as a rule, water with a temperature of up to 25ºС turns blue or blue. Further, as the temperature rises, the water acquires warmer shades, from green to bright red.

Important: regardless of the cost and manufacturer, boiling water in all these devices is shown as a bright red, sometimes flashing signal.
More advanced programmable designs, at prohibitively high temperatures, have the function of turning off the water.

A few words about installation

As we have said, the installation instructions for such a useful unit are extremely simple. You don't even need any additional tools, just your hands and of course your head.

Mistakes are often made only at the procurement stage. The fact is that the vast majority of mixers have a standard fixed outlet diameter, this was done for the convenience of users.

In addition to the LED nozzle, there are a number of aerators and devices that can. And if each fixture has its own unique diameter, confusion will arise.

The whole variety of taps on mixers is distinguished solely by the type of thread on the outlet. It can be internal, that is, cut from the inside and external, visually visible. Accordingly, all fixtures intended for installation are focused on these two types of thread.

Tip: if you are planning to buy an LED nozzle, then it will not be superfluous to measure the distance from the edge of the faucet spout to the bottom of the sink.
The fact is that such a nozzle will lower the drain hole by 20 - 30 mm and in a shallow one with a low mixer, it will be inconvenient to use such a device.

As for the installation itself, everything is extremely simple. You need to unpack the nozzle. Unscrew the "native" aerator from the mixer spout, if any. And screw the LED nozzle onto this place.

If the thread is screwed in too freely or leaks during operation, then it will be necessary to additionally wind several turns of sealing fum-lena onto the thread.

The video in this article provides additional information on this topic.

Conclusion

An illuminated faucet in any bathroom or kitchen will look luxurious. This is especially true if you have good repair and installed expensive plumbing, in this case, such a faucet will fill your bathroom with unique romance.

If you want to acquire not only a useful, but also an interesting accessory that can help you decorate your bathroom or kitchen space, then you can use the LED faucet nozzle. This is easy installation, which is able to highlight the water in a variety of shades.

Peculiarities

Nozzles can be called decorative elements, which relatively recently began to appear on sale. Basically, they are purchased as a souvenir or along with other interesting items in Chinese stores on the Internet. The release of such products is not carried out by famous brands, but most often by unknown small companies.

But with proper use, the nozzle can still perform useful features. Thanks to some features, the LED, which is located inside this small part, is able to change the shade of the supplied water pressure depending on the temperature indicator.

In order to make it easier to navigate, below we give the ratio of temperature and color indicators of the nozzle:

  • at temperatures up to 32 degrees, the color of the water is blue;
  • when the temperature rises from 33 to 40 degrees, the color changes to green;
  • from 41 to 45 degrees - red;
  • from 45 degrees or more, the backlight remains red, but it starts flashing.

Please note that the color change scheme is the most common, but there are other options on sale.

In order to avoid an unpleasant situation, the recommendations in the instructions remind you that before using the nozzle, you need to test it several times in all modes. Thus, you will not only find out which color corresponds to temperature indicators, but you can also choose for yourself optimal temperature water.

Advantages and disadvantages

The purchased product in the kit has batteries in the form of batteries, but they are required only in order to check the operation of the installation, since their charge is weak.

Those who have already installed such a device in their bathroom or kitchen note a number of its advantages.

  1. Nozzles do not need an additional power source. They don't need batteries or charging device powered by electricity.
  2. The device can act as a kind of signaling device. Since the nozzle changes color depending on the temperature, you can always find out how hot or cold it is. cold water comes from the faucet.
  3. The installation is able to fit into any style of interior and design of the crane. This unique element can become original decoration interior, regardless of the color solution it is made in.
  4. With the help of the LED nozzle, you can organize a fairy tale and comfort in the house.

So if you have a desire to diversify the space in the house, you can hardly do without the presented device. Such an installation will seem to the household a real find, and the guests will simply be delighted with it.

This device also has negative sides:

  • in the absence of proper water pressure, the nozzle will not work, and the water will not light up;
  • products are very fragile, because they have small size(their length ranges from 3 to 7 cm), resulting in a short service life.

Models

You can buy LED nozzles in several versions:

  • for crane;
  • for a shower

The first model is available in several types. They can be with an arbitrary change in shade and with a built-in temperature sensor. The most popular type is the second one. It reacts to changes in the temperature of the supplied water. If the value is borderline, for example, the water is not cold, but also not warm enough, then the nozzle starts flashing both green and blue.

Installation of such a nozzle is simple and takes only a few minutes. The installation process is also simplified due to the fact that on all modern faucets there is a removable nozzle with a filter, due to the removal of which the nozzle with illumination is installed. The filter is removed, the light nozzle is screwed on, and you can use it.

These devices are produced in classic design so they match perfectly with any faucet.

The second model of the nozzle is designed for installation in the shower. The cost of such a nozzle is greater than that of the previous version, but the effect of it is significant.

It will undoubtedly appeal to people of any age, since we are all children at heart. Such an insignificant detail will not only allow you to enjoy magical moments, but also allow you to arrange a pleasant evening, taking an unforgettable shower with your other half. Such an installation on the shower will also give a few minutes of magic to the child: they are delighted with the water, which glows in all possible colors.

Users note that the second option is more beautiful for the shower, since the water shimmers with all possible shades in the work.

These models do not require batteries. All the energy needed comes from water. There is a small turbine inside the nozzle, which starts working from the streams and emits light. That is, by purchasing such a nozzle, you become the owner of a miniature hydroelectric power station.

Such a nozzle is made of chrome-plated plastic, which allows you to fit it into any bathroom interior.

You can buy such models of nozzles in the Bradex store, reviews of which are only positive. Having bought such a nozzle here, you will enjoy temperature control, watching how the flow palette changes.

How to install?

You can install the nozzle yourself without the help of craftsmen. Everything is very simple, the main thing is not to forget to place a special rubber gasket inside, which acts as a seal between the spout and the nozzle. If this is not done, water can pour out of the cracks, which is very unpleasant.

Although the device can be called primitive, it is advisable to study the instructions in detail before installing it. In this case, it will take you no more than 5 minutes to place it.

The installation process is as follows:

  • carefully unscrew the mixer with the filter from the spout;
  • in the nozzle we place the sealant that comes with the kit;
  • install it on the outlet.

The pictures that are in the instructions can help with the installation: they describe the entire process in detail.

After the installation is completed, you can turn on the water.

  • The nozzle will start working from the first switch on. Since the water will be cold at first, the color of the stream will be blue.
  • Try increasing the water temperature and watch the sensor - it should change color.
  • Bring the temperature to the maximum. The LED nozzle should turn red and then start flashing.

The last indicator will be the most useful: you can always find out how hot the water is from the tap, especially when you have to bathe a small child.

Concern about decorating the interior of a house today has acquired a truly grotesque scale: people are ready to spend hours looking for unnecessary, but pleasant trinkets for sale, with which they want to decorate kitchens, halls, bedrooms, bathrooms. The people, as they say, have reached the understanding of style, and now they are trying in every possible way to ensure harmony in the house, add exoticism and chic to it. In this regard, many people will like the new invention for faucets - light attachments for a faucet or a shower head, which can already be bought in online stores.

The meaning of the decoration is in the design of the nozzle. It is worn on almost any faucet that has at least some kind of thread. Inside the nozzle there are red, blue and green LEDs, a pressure and temperature sensor, as well as batteries. In the latest modifications, batteries may no longer be used, they are replaced by small impellers that provide current from the pressure of water. The purpose of the nozzle is to turn on the LEDs when the water pressure in the tap and reflect its temperature with the appropriate light: cold water will be blue, at a temperature of 32-43 degrees - green, above - red, and in the presence of "boiling water" the red LED will start working in pulsation mode. Some companies prefer not to use such an algorithm, but to create a constantly iridescent light palette that simply captivates the eye. However, even one color for water looks very attractive. So, children who do not like to go to the tap once again will now be happy to wash their hands, wash their faces, and brush their teeth. Adults will find the illuminated water attractive when taking a bath or in the shower. By the way, not a nozzle is often used for a shower, but a replacement for the watering can itself. If the faucets are not threaded, various technical tricks can be used to carefully secure the nozzle to the edge of the faucet spout.
By the color of the jet, you can determine the temperature of the water from a distance, which can be very useful. In addition, the light from the LEDs is so bright that it illuminates an area of ​​​​1-2 square meters well. meters, reaching to the floor, and this allows you to once again not turn on the light at night in the kitchen or bathroom. The flowing colored water at dusk looks simply gorgeous, while the life of the LEDs is designed for a huge 60 thousand hours or even more (the service life directly depends on the glass coating).
More or less wealthy people acquire such nozzles, especially appreciating comfort, although the price of the nozzle is low. It's just that poor people have problems and more serious than the color of the water in the tap, and their nervous system such a nozzle will not calm you down. On the other hand, LED technology has other advantages. So, it practically does not consume electricity, so there is every reason to systematically replace all lighting devices with incandescent lamps with LED ones. At least, table lamps, nightlights, lighting for children's rooms. Some inventions are even more interesting, such as turning on floor lighting when pressure is applied to the floorboard. At the same time, electricity consumption is several times less than even energy-saving lamps, which, it turns out, are not as safe as they were previously considered. LED technology today is extremely diverse in order to use it almost everywhere where there is enough a small amount lights: marking driveways, paths, lighting in the basement or cellar, in garden lights that turn on by cotton or movement. Many variants of such equipment are designed for suburban use, but for an apartment you should start at least with LED nozzles: and let the water shine just for fun!

The LED faucet nozzle can impress you, because with its help the flow of water from the faucet in the bathroom or in the kitchen will become colored. Such a device will turn a banal dishwashing or morning washing into an interesting activity. With this nozzle, your house will turn into a dwelling from science fiction films about the distant future. Now your children will be happy to wash and wash their hands before eating or coming from a walk. Your child will not be difficult to get to wash his hands, you will not be able to simply drag him away from the sink. The LED faucet attachment attracts both children and adults.

Why does water glow?

In appearance, a fantastic picture - luminous water pours from a tap, has a fairly simple logical explanation.

The secret of the operation of the device lies in the change in the color of the water according to the change in its temperature in the stream pouring from the tap. It happens automatically, which is why it looks fantastic. This feature of the device makes the process of washing hands safe, seeing that the water has become highlighted in red, you will know that it is hot and cannot get burned.

The red color of the backlight will be when the water temperature is more than 36 degrees. Blue color indicates that the water is optimal for washing and other water procedures, it temperature regime fluctuates in the range from 26 to 35 degrees. If the water has a temperature of up to 26 degrees, then the nozzle on the faucet LED palette highlights the water with a green tint.

Top Reasons to Buy LED Faucet Heads

The presented nozzle has a number of undeniable advantages that confirm the relevance of its purchase:

  • in the bathroom or in the kitchen, the nozzle will make the environment fantastic and unreal;
  • saves energy - you can wash your face without even turning on the light in the bathroom;
  • versatility - the device is suitable for most existing cranes;
  • nozzle - an excellent decoration of the interior;
  • LED nozzles on the faucet have a democratic price, so you can purchase several devices at once for both the bathroom and the kitchen;
  • with it, washing hands for your children will turn into an exciting game;
  • it does not require batteries to operate.

A lot of grateful customers left reviews for the LED faucet nozzle, in which they note how the interior of their kitchen and bathroom has changed with this device. Anyone can install such a nozzle without special plumbing skills.


First you need to disconnect the old nozzle from the tap and screw this device in its place. An important advantage of the device is the fact that in addition to highlighting the water, the nozzle acts as a filter that purifies the water. You can buy a LED nozzle for a faucet from us, and we offer a price much lower than existing similar offers. At the same time, the device is of excellent quality and will be able to amaze you for more than one year. The LED nozzle on the faucet in Moscow is presented in our store at a favorable price for the buyer.

Buy from LED faucet attachment
You can in our online store. Price lower than competitors

Neither in China nor in Peru - buy online!

With this amazing nozzle, your tap water will be colored. Not painted, but illuminated with LEDs. Moreover, its color depends on temperature, this is a useful hint whether it will burn you and whether the water is too cold.

No batteries or other power sources are needed for the Faucet Light Nozzle. When water passes through the device, the energy of its movement activates the LEDs. And the temperature sensor signals what the backlight should be:

  • less than 31°C: blue light;
  • 31-43°C: yellow light;
  • 43-50°C: red light;
  • above 50°C: flashing red light.

Higher temperatures can ruin the device, so try to keep an eye on this, including the water, and always start cold.

How to use

To install the device, it is necessary to disconnect the standard aerator from the tap and put this device to the mixer in its place. In case the diameter does not fit, there are two universal adapters in the form of plastic rings.

Detailed installation instructions are on the back of the package, in Russian. It describes literally every step. By the way, there are others in the Mr. Geek store interesting devices similar to this:

Among them one can find interesting options gifts for both children and adults. And the ordinary process of daily water procedures will turn into a multi-colored magical attraction.

Characteristics

  • food: from a stream of water (without batteries);
  • included: nozzle, 2 adapters of different diameters, instructions in Russian on the package;
  • material: plastic, metal elements;
  • size (diameter*length): 5.7*3.5 cm;
  • weight: 20 g;
  • heat sensitive color change;
  • packaging: blister;
  • package size (L*W*H): 20*13*4.5 cm.