How to get rid of lilacs on the site forever: ways to remove roots and overgrowth. How to deal with lilac root shoots in the garden and get rid of them forever How to get rid of lilac shoots with folk remedies

02.05.2020

Not every experienced gardener can fight the root shoots of lilacs. We offer you a method by which it will be possible to prevent the occurrence of unwanted shoots. The method is cardinal, but effective and accessible to everyone.

Lilac. Photo used under standard license ©site

Before proceeding with the elimination of overgrowth, you need to find out what leads to its occurrence. If the bushes are provided with all the conditions for full development, this phenomenon should not occur. As a rule, overgrowth is caused by the following reasons:

Lack of moisture. If you do not resort to systematic watering of the plant, it will take roots closer to the surface of the earth, to a place where the earth is moistened by precipitation. Against the background of such development of the root system, shoots are formed.
Strong pruning. This one of the most common causes shoot formation. If you delete a large number of branches, the plant will experience a shock, as a result of which it will release young shoots.
Physical damage. Mechanical and thermal damage to the plant often leads to the formation of shoots.
Exposed roots and ailments.

Before taking measures to remove the overgrowth, it is advisable to make sure that there are no reasons for its occurrence. If they are not eliminated, the struggle will be meaningless and can continue indefinitely.

Photo used under standard license ©site

Is chemistry effective?

The use of chemicals is an effective way to destroy overgrowth. However, herbicides are dangerous for all other crops that grow on the site. The product is washed off by precipitation, absorbed by the soil, after which it spreads with groundwater throughout the summer cottage.

Almost on any personal plot there are trees. Sooner or later the time comes when they cease to produce a crop and must be disposed of. Cutting down a trunk is not at all difficult, but not everyone knows how to quickly uproot a stump without effort and spend a lot of energy in an unsuccessful struggle.

Exist various techniques how to uproot a stump without effort, and each of them has its own advantages, as it is selected individually, depending on the location of the stump itself on the site. Let's learn more about these methods.

The use of heavy equipment

As experience shows, quickly uprooting a stump without making any effort is possible only by using mechanical assistants. It should be noted right away that this method is the most expensive, because an hour of operation of such equipment is very expensive.

But the goal will be justified if there is a huge stump of large diameter on the site, which is simply unrealistic to deal with manually.

As a rule, the stump is first dug around the circumference in order to pass a steel cable under its roots. After it is securely fastened, the caterpillar tractor, with a little effort, pulls the stump out of the ground along with the thick branches of the roots. If you cut down a tree high, then you can simply wrap a high stump without excavation.

In addition to the tractor, a bulldozer or excavator can be used, which can pick up a stump in the area of \u200b\u200bthe roots with a bucket and completely uproot it in just five minutes.

But, in this way, stumps can be uprooted in that area where it is possible to turn around this large-sized equipment, but in already cultivated areas, this is often impossible. Therefore, heavy artillery is used at the site planning stage, when there are no fences and perennial plantings in the garden and orchard.

A completely different matter is a small cutter or stump grinder, which has dimensions no larger than a lawn mower. With the help of such manual equipment, the stump and adjacent roots are easily crushed into sawdust to a depth of 30 centimeters.

manual method

Swinging a sledgehammer and wielding a crowbar is a task that not everyone can do. But you can cheat a little if you use as a supplement manual winch. It is installed near the stump, the height of which should be at least a meter, for a better grip. The roots will need to be bare in order to put a wooden wedge under them on the side opposite from the winch. Without much effort, the stump can be pulled out of its place in a couple of hours of work and taken to ennoble the vacated piece of land.

Chemical method of uprooting stumps

When chemistry began to be actively used in agriculture, people learned how best to uproot stumps without physically bothering themselves at all. Although, it should be noted that this one should not count on a quick result. But if there is a year or two in stock, then it is better to use this simple version of uprooting.

In the stump it is necessary to drill as many deep holes as possible with a diameter of about 10mm. It is desirable to do this in the fall, so that during the winter the chemical processes naturally have time to produce the necessary effect on the tissues of the tree. Urea should be filled into these holes.

Thus, until next autumn, the wood will be completely destroyed and only a pile of dust will remain in place of the stump. Salt has a similar effect, which also destroys the stump, but it can only be used where development is planned, since excess salt in the soil leads to a sharp decrease in soil fertility.

But ammonium nitrate, which is also poured into drilled holes, has a slightly different effect. It is absorbed under the influence of moisture into the tissues of the tree, making them more combustible. Having saturated the stump with such a solution, you can burn it very quickly, obtaining an excellent fertile area.

Those who do not know how to properly uproot a stump on their own can be advised to contact a specialized service that cuts trees and uproots stumps. These organizations have specialized equipment and extensive experience, so they can easily save the site from such a problem as an old stump.

White mold in the cellar - how to get rid of it?

White mold in the cellar can be removed in a variety of ways, but if it is not possible to identify the cause of its appearance, then it will form on the walls and ceiling all the time. Therefore, it is necessary to provide the room with high-quality waterproofing and ventilation.

Dampness in the cellar - how to get rid of it?

You can get rid of dampness in the cellar in a variety of ways, but first you need to determine the cause of its occurrence. Often you can’t do without good waterproofing of walls and floors, which means a lot of work lies ahead. There are also folk methods struggle.

Forced ventilation in the cellar

A cellar is necessary for any gardener, as it will allow you to keep the crop in winter season. In order for it to function properly, it is necessary to take care of the ventilation system. In this case, it happens that you need to install forced ventilation, which is described in this article.

What temperature should be in the cellar?

The presence of a cellar is a great opportunity for long-term storage of all kinds of products.

However, you need to be sure that the temperature and humidity in the cellar are within normal limits. Otherwise, the products will either freeze slightly, or, on the contrary, deteriorate from overheating.

Reproduction of lilac by rhizome shoots

Own-rooted varieties of common lilac from the age of four and five begin to produce shoots. Not all varieties are able to develop a lot of shoots. There are also those who give it little or almost none. Especially a lot of shoots appear, starting from the age of five to ten, in bushes growing on deep, fertile, well-drained and warm soils. The shoot inherits all the characteristics of the variety, it can be successfully used for reproduction. In small gardens, it is grown up to two or three years, without separating it from the mother plant, then at the end of summer - the beginning of autumn, it is transplanted to a permanent place.

The first time the lilac shoots are separated in early June when it reaches 5-7 cm in height, when the shoots have not yet turned brown. Before separation, the soil on the uterine plot is abundantly watered. The roots of the overgrown are very tender, quickly wither, so you need to separate it in cloudy weather or in the morning and evening hours, as it is planted.

When digging, the roots should be 3-5 cm long. The plants are placed in a pick box, the bottom of which is sprinkled with wet moss, peat or sand, and sprayed. Then planted in a cold greenhouse. The density of planting in a row and between rows is 5-7 cm.

The first week after planting, lilac plants are kept under a film and sprayed twice a day.

During this time, they develop young roots. Then the shelter is removed and watered as needed. In the nursery, it is better to grow the shoots in two growing seasons. In the second year, at the end of summer - the beginning of autumn, seedlings are transplanted to grow into a school of shrubs for two years.

The second time the lilac shoots are separated in late August - early September, in more southern zones - later. Its height at this time is 15 cm or more, and the shoots are somewhat woody. The roots when digging may not be very long, but rather well branched. According to the degree of development, the shoots are sorted into two varieties. The first includes stronger plants. They are planted for two or three years in the school of shrubs for growing, after which they are sold as standard seedlings. The second grade shoots are dived onto the ridges, where they are grown for one or two years, and then they are transplanted for two years into the school of shrubs.

When caring for lilac mother plants, special attention should be paid to the timely thinning of the bushes, the removal of old and diseased branches; faded panicles are cut if seed collection is not expected. The soil of the near-stem circles is sufficiently fertilized, moderately moistened and mulched.

Lilac bushes grown from shoots enter a period of mass flowering at the age of five to seven years, that is, about two years later than with those propagation methods when shoots are taken from already flowering branches. However, the late start of flowering seedlings of coppice origin more than pays off with their longevity.

The degree of development of shoots in own-rooted plants different varieties lilac is little studied. It is known that many shoots are formed in such varieties as Buffon, Madame Casimir Perrier, Captain Balte, Condorcet, Reaumur, Furst Bülow.

Lilac. How to fight? Help Wanted!

Good time of the day everyone!
Yesterday my husband and I tried to fight lilacs on garden plot.

It was necessary to bring out 3 large lilac bushes with suburban area with minimal losses for the garden and for our forces.
Our bushes are sooooo old, withered already in the middle, and along the edge of the bush there is a lot of young growth and this growth stretches almost 3 meters from the bushes.
Yesterday they tried to lime one of the bushes. First, the young growth was dug around the edges, then they broke out the branches from the middle, and then they made a fire in the place of the former bush and burned it out. The effect, of course, is not very good, but at least for a couple of weeks this will stop our lilacs from active reproduction. There are a few young cuts left to use the new methods.
The question is the following: How to lime the roots? And how to remove lilac bushes from under an apple tree. One sits right up close, so far we are afraid to touch it.
Uprooting with hands and feet - I'm afraid my husband won't have enough for this. He tried to lime one bush for 4 hours, then we did not solve the issue with the roots.
I read on the internet about herbicides, such as ROUNDUP, TORNADO, HURRICANE, etc.

But scary for an apple tree.
Who will advise.

These are the bushes we have along the fence. part of the cherry weed was removed, lilacs remained “for dessert”.

Fruits of men's labors.

First, cut down everything. And it’s even easier to mow small branches with a trimmer. Good trimmers take branches up to 3 cm. That is, in five minutes the husband will mow everything that is needed and unnecessary. Only instead of fishing line, you need to put knives. And then let him take an ax, which is not a pity, and cut all the branches right in the ground. The apple tree will not suffer. If new ones come out over the summer, let them cut them again. You can then dig this place several times with a cultivator without going too deep. Then dig it with a shovel. I so exhausted the bird cherry bush. And the bush was not like yours. It was five meters high.

Daughter Carlo writes:

Good trimmers take branches up to 3 cm; I need to have such a dead one, only cut grass and only not dry. but I still can’t afford a more powerful one, I also dream

Ask your neighbors. Someone in the village puts hayfields with such a thing. Or ask if there are knives for your dead one too.

there are no knives on my dead one)))) his motor will not stand it, I thought to independently come up with something like that and ask. Do not need! pay and you will be mowed down

Well then, ax in your hands and cut down everything right in the ground.

noooo! everything is fine with me with lilac!))))) I’m not going to cut it down, on the contrary, I want to plant it along the back boundary of the plot instead of a fence, this is the author of the post, the lilac has grown)))))

Maybe you will find something useful for yourself here?
http://www.asienda.ru/post/1428/
Cutting down, as I understand it, is not difficult? But to remove the roots.

I read this post, thanks. The trouble is that there is no trunk as such. only branches and roots. (((((Therefore, it was not possible to use this post. (((

Here, for example, the first way, where you need to fill in saltpeter, can help. If you cut everything down, make holes in several stumps and fill it with saltpeter.
Or method number 4, where to pour salt

I also sprayed the bushes and even drained the wild tornado and all the roots were gone without any problems

I have not been able to grow lilacs for years, they are dying in my swamp, and you don’t know how to get rid of them. Probably we are in the north only happy with every flowering stick

I would also be happy to bloom. BUT our junk is not something to bloom. it can't really grow anymore. a rotten stump sits, and a trifle climbs around. husband said LIME. and dot. I wanted to dig her. young man on the fence. but he is totally against it.

Although the lilac looks very nice and smells good.

Here you can clean up.

They began to clean up the lilacs, the old fence began to collapse. It turns out he was on the bushes. Now we need to wait for the repair of the fence.)))

I just started a repair, I wanted to change the wallpaper, I began to tear off the old ones, and the ceiling fell on me), or rather, the wallpaper from the ceiling, it turns out that they held on to the wallpaper on the wall, I also had to make the ceiling.

Encyclopedia of Plants

The stinky basil belongs to the family called Ranunculaceae, in Latin the name of this plant is as follows: Thalictrum foetidum L. Description of the stinky cornflower The stinky cornflower is a perennial herbaceous plant, whose height will fluctuate between fifteen and sixty-five centimeters.

http://www.asienda.ru

A well-groomed shrub is not only a bright subject landscape design, but also brings delicious fruits.

How beautifully lilac or jasmine blooms in spring and what delicious strawberry or blackcurrant jam can be. It's almost a taste of childhood. But for fruit or ornamental bushes you need to constantly monitor, cut, clean and sometimes dig out in order to allow the rest of the cultures to fully develop. A perfectly reasonable question arises how to remove shrubs correctly, so that on next year he did not give new growth. As when removing trees and stumps, it is most often used manual method removal. It is the most simple, accessible, understandable and cost-effective. In addition, removing shrubs is not such a large-scale event as uprooting fruit trees, For example.

So, let's look at solutions to the problem. different ways to make it easier to navigate when choosing the right one:

How to remove shrubs from the site manually - to begin with, the bush needs to be examined and assessed the scope of work in order to determine what kind cutting tool It can be useful.
If the plant is small, a hand saw will suffice, if the main branches are about thumb hands, it is better to take a chainsaw. First, the largest branches and the crown of the bush are cut off, then with the help of a shovel, you should dig it up and take it out along with the roots. It is imperative to remove all the roots so that next year there is no annoying overgrowth. The process of removing shrubs is greatly facilitated if you first water the rhizome with a good pressure of water from a hose.
How to remove shrubs from the site using a mechanized method? Heavily overgrown areas, where there is a lot of vegetation, are not entirely advisable to clear by hand, and it will take a lot of time. In such a situation, it is best to involve special equipment (tractor) for work or remove the bush with special equipment - a brush cutter. For uprooting, you can use a winch, which makes it much easier to pull large roots out of the ground.

It will be an indispensable assistant in a small summer cottage or in the garden, where it is simply impossible for a tractor or excavator to drive. With a large amount of shrub vegetation, one should not forget about the disposal of logging residues and wood debris. You can’t just throw them in the trash, and kindling a fire is not always safe event. That is why it is worth taking care of cleaning the territory and removing the leftovers in advance.
How to remove a lilac bush in the garden? In most cases of bush harvesting, it will be sufficient to cut down only the visible part of the ground. But some types of bushes give such abundant root shoots that sooner or later you still have to bring the process to the end. These plants include lilacs. As a result of its vital activity, it gives a lot of lateral roots, which are almost impossible to remove manually. If the bush is quite large, you can uproot the largest roots, and chop the ground around it with a shovel and sprinkle with ordinary edible salt, at the rate of 1 pack per square meter. True, the soil after such an operation will be unsuitable for growing other crops for some time. It is better to use a herbicide (for example, Roundup), which is great for cleaning shrubs. And next year, the territory can be dug up and planted on it with the most “fastidious crops”. Treatment with a chemical preparation is also suitable in the case when you do not know how to remove the roots of shrubs, usually ornamental. This event will not require special physical effort, and the territory will be fully cleaned.

"Treemaker" - a company with vast experience in the fight against unnecessary green spaces. Any process carried out by our specialists takes place in accordance with the schedule and all legal regulations. Waste disposal is also an integral part of our work. If, in order to make a decision, you need to know how much it costs to cut down a shrub in your garden, call us, our consultants are always happy to answer all your questions and offer options for a way out of the situation.

"Treemaker" separately provides the following services: cleaning of wood debris from the territory of the customer, purchase and export of firewood of fruit and ordinary tree species from any site.

CONTACT US

Lilac is a shrub prone to growth when adverse factors appear. The root system of the plant is able to spread over considerable distances, releasing young shoots. Not all varieties of shrubs give growth, and an already captured area can be cleaned without much difficulty. Exist different ways how to quickly and effectively get rid of lilac overgrowth, each gardener can choose the most convenient one.

It is easier to deal with overgrowth, knowing for what reason it appeared. Lilac abundantly releases new shoots when exposed to adverse factors.

Unsuccessful planting site

Lilac actively shoots if the place of growth for her is uncomfortable, threatening with diseases. So the plant tries to save itself if the mother bush dies.

Insufficient deepening of the root system

In a shrub that is not deep enough when planting, the surface roots suffer from a lack of moisture in the upper soil layer, and they begin to actively release shoots. The solution to the problem is deepening the roots. It is only necessary to add soil to the area around the plant.

Different types of shrub damage

A small injury to the trunk is enough for the bush to actively shoot. When the bark and wood are damaged, the circulation of nutrients in the tissues is disrupted. The root system, trying to save the aerial part, starts the process of plant rejuvenation by releasing numerous shoots.

What harm can it do?

An uncontrollably growing lilac is capable of capturing the entire site in a few years. Lateral roots produce several offspring every year, which can appear at a distance of several tens of centimeters from the trunk.

A bush of 50 years of age captures a plot with a diameter of more than 10 m.

Gradually, the shoots begin to give offspring, and the territory of capture expands even more. It is impossible to use the captured area either for beds or for garden plantings.

How to get rid of lilac overgrowth on the site?

Some gardeners strive to completely remove the lilac in their area, others want to leave a beautifully flowering bush, they are not satisfied only with the shoots. There are many ways to clean the site: chemicals and folk remedies are used, they are removed manually.

Use of chemistry

Strong herbicides are used to quickly get rid of lilac offspring. Suitable Tornado, Roundup. However, with a strong growth, standard spraying with these chemicals is useless.

In order to get rid of thickets for sure, processing at the beginning of the growing season is carried out according to a special scheme:

The shoots are not sprayed, but coated with a brush so that the active substance penetrates the plant tissues faster and in greater concentration.
If the mother bush is large, and its growth is abundant, then it will be necessary to process the shoots 2-3 times.
When the growth of young plants stops, it is advisable to cover the area around the bush with dark material, leave until the next season.

If you want to get rid of thickets faster, then you can use arboricides - chemicals that act on tree and shrub vegetation.

Arboricides are potent substances. It is necessary to strictly observe the dosages, use chemical protection means.

Manual removal

Many gardeners use simple and old way elimination of overgrowth - uproot the bush. Usually this method is used if etching with chemicals is undesirable.

Action algorithm:

Saw off the trunks of the mother plant.
Each offspring is cut at the root.
Remove the top soil layer to expose the roots.
Large areas of the root system are uprooted with a shovel.
They are taken for lateral root layers, pull them out of the ground to one and all.

Folk remedies and recipes

If you don’t want to mess with a shovel, you can use effective folk remedies:

Fill the overgrown area with salt (1 kg per 1 m 2). Pour in boiling water. Close with roofing felt or other dark material. Leave for a year or two.
Cover the ground in the area with fresh manure. The procedure is carried out at the end of the growing season, the soil surface is covered with dark material for a year. Due to the saturation of the soil with organic matter, the plant will go into active growth instead of preparing for winter dormancy. The offspring will lose a lot of strength and die.
Sodium nitrate works the same way. It is also applied in high concentration to the soil at the end of the growing season.

A set of preventive measures

Experienced gardeners share tips on how to avoid lilac overgrowth on the site.

Lilac. How to fight? Help Wanted!

Good time of the day everyone!
Yesterday my husband and I tried to deal with lilacs in the garden. It was necessary to withdraw 3 large lilac bushes from the summer cottage with minimal losses for the garden and for our forces.
Our bushes are sooooo old, withered already in the middle, and along the edge of the bush there is a lot of young growth and this growth stretches almost 3 meters from the bushes.
Yesterday they tried to lime one of the bushes. First, the young growth was dug around the edges, then they broke out the branches from the middle, and then they made a fire in the place of the former bush and burned it out. The effect, of course, is not very good, but at least for a couple of weeks this will stop our lilacs from active reproduction. There are a few young cuts left to use the new methods.
The question is the following: How to lime the roots? And how to remove lilac bushes from under an apple tree. One sits right up close, so far we are afraid to touch it.
Uprooting with hands and feet - I'm afraid my husband won't have enough for this. He tried to lime one bush for 4 hours, then we did not solve the issue with the roots.
I read about herbicides on the Internet, such as ROUNDUP, TORNADO, HURRICANE, etc. But it's scary for an apple tree.
Who will advise.

These are the bushes we have along the fence. part of the cherry weed was removed, lilac remained "for dessert".

Fruits of men's labors.

Daughter Carlo writes:

Good trimmers take branches up to 3 cm; I need to have such a dead one, only cut grass and only not dry. but I still can’t afford a more powerful one, I also dream

Ask your neighbors. Someone in the village puts hayfields with such a thing. Or ask if there are knives for your dead one too.

there are no knives on my dead one)))) his motor will not stand it, I thought to independently come up with something like that and ask. Do not need! pay and you will be mowed down

Well then, ax in your hands and cut down everything right in the ground.

Maybe you will find something useful for yourself here?
http://www.asienda.ru/post/1428/
Cutting down, as I understand it, is not difficult? But to remove the roots.

I read this post, thanks. The trouble is that there is no trunk as such. only branches and roots. (((((Therefore, it was not possible to use this post. (((

Here, for example, the first way, where you need to fill in saltpeter - can help. If you cut everything down, make holes in several stumps and fill it with saltpeter.
Or method number 4, where to pour salt

I also sprayed the bushes and even drained the wild tornado and all the roots were gone without any problems

I have not been able to grow lilacs for years, they are dying in my swamp, and you don’t know how to get rid of them. Probably we are in the north only happy with every flowering stick

Although the lilac looks very nice and smells good.

Here you can clean up. They began to clean up the lilacs, the old fence began to collapse. It turns out he was on the bushes. Now we need to wait for the repair of the fence.)))

Encyclopedia of Plants

Stinky basil is part of a family called Ranunculaceae, in Latin the name of this plant is as follows: Thalictrum foetidum L. Description of stinky basil Stinky basil is a perennial herbaceous plant, the height of which will fluctuate between fifteen and sixty-five centimeters.

http://www.asienda.ru