coupe 

We repair vertical blinds with our own hands. How to fix horizontal blinds with your own hands if the slats or plank are broken Vertical blinds do not open what to do



CALLING THE MASTER AND DIAGNOSIS FOR FREE

Repair of horizontal blinds

Horizontal blinds are a popular type of design, but unfortunately they tend to break. Popular Models horizontal blinds (aluminum, wood, plastic and isolight cassette system).

The main breakdowns of horizontal blinds:

1) Breakage of the turn hooks.
2) Replacing the lower clamps
3) Replacement of the control rope.
4) Replacement of the lifting mechanism.
5) Replacement of the rotary mechanism.

Free consultation by phone,
how to repair your blinds yourself.

Repair of vertical blinds

Vertical blinds are also popular and have all positive properties. Popular models of vertical blinds (plastic, aluminum, rope, fabric, and multiimpressive blinds)

The main breakdowns of vertical blinds:

1) Break of the lower connecting circuit.
2) Breakage of the rotary control chain.
3) Breakage of the slider.
4) Breakdown of the control mechanism
5) Break of the control rope.
6) Breakage of the lamella of the holder (shoulder)

We also provide additional features:

Shortening the slats in height.
Shortening the upper cornice in width.
Hole punching in plastic and aluminium.

Roller blind repair

Roller blinds are modern model traditional curtains. An extensive collection of plain and colored fabrics with varying degrees of darkening, with special impregnation properties (non-combustible and moisture resistant)

Popular Models roller blinds(classic with an open pipe, cassette in a box, mini system, classic zebra blinds and in a box.

The main breakdowns of roller blinds:

When purchasing blinds, many are not interested in the rules for operating systems, which leads to breakdowns of rather fragile structures. If you navigate the structure of the product, you can repair the blinds yourself. In most cases, a part or lamella needs to be replaced, so when buying a structure, you should pay attention to whether spare parts are included in the kit.

Breakdowns of vertical blinds and how to fix them

To repair vertical blinds, you need to know what breakdowns and for what reason occur most often.

  • Damaged or broken control cord. If the place of separation is in plain sight, you can simply restore integrity by carefully stitching the two ends. But a more practical option is to replace the part. To do this, the cassette is opened, in which the control system is located, the remains of the old part are removed, and the new part is carefully mounted through a special hole.

If the cord broke very quickly, this indicates a low quality of the components. Even if there is a spare cord in the kit, it is better to take measurements from the product and immediately purchase a more reliable part.

  • If the vertical strip is damaged the part is just replaced. This is a simple but demanding process, especially if the slats are strung on a chain rather than fastened to it.
  • With your own hands, you can reduce the length of the lamellae. To do this, you need to carry out all the necessary calculations, apply marks, cut off the excess and skip the control chain along the bottom of the strips.

If the repair of vertical blinds requires a bulkhead of the entire eaves or the replacement of many components, it is better to contact specialists. They will quickly and efficiently carry out the work, choosing the best parts. Only professionals can cope with a decrease in the width of the structure.

In some cases, the repair of horizontal blinds by professionals is even more expensive than the purchase new system. Therefore, in the event of a problem, it is recommended to evaluate the breakdown and, in the absence of the possibility of repairing the structure, independently consider the option of acquiring a new product.

Complicated repairs are allowed in case of breakdowns, new systems will cost much more. The same approach is welcomed when repairing structures made to order.

mend horizontal blinds do it yourself in the following cases.

  • Bottom slats are not parallel to each other. If no deformation of the slats is visible, this indicates a displacement of the lifting cord. You will have to work with the cords until the slats are in the correct position. If necessary, the cords are fixed with clips.
  • Planks do not move about their axis. First you need to establish the cause of the breakdown. If the tilting cord just jumped off, it must be returned to its place and fixed. If the moving mechanisms stick, they are lubricated with oil. If the leading parts (wheel or pin) jumped out of place, they are returned to the correct position.
  • When the lift cord is no longer fixed, this indicates a mishandling of the structure. If the part jumped out of the lock, it must be returned to its place. Sometimes you can just pull the cord at different angles, and the element will fall into place on its own.
  • If the control lock is stuck and the system cannot be lowered, you need to strongly, but without pulling, pull the cord down, and then direct it up.
  • Replacement of single lamellas is also possible, but you should pay close attention to the color of the plates: they can form a sharp contrast. To avoid this, sometimes several strips are replaced at once.

After the repair, you should think about your attitude to the systems. Most often, breakdowns occur as a result of abuse of the strength of the lifting mechanism.


Repair of rolled sun protection structures

If the blinds are damaged, there is nothing left but a complete replacement. Considering the fact that the framework of the structures looks best with the "native" canvas, it is recommended to purchase a new system.

If the problem is in the lifting mechanism, you can solve it yourself. In this case, the cassette is opened or the web is removed from the roller, and the cause of the breakdown is eliminated.

Replacing a broken cord is easy. Just do not tie the two ends, it is better to replace the part completely.

If the problem is that the canvas is not firmly attached to the glass surface, you need to check the guides and the weight at the bottom of the curtain.

When the problem is fixing the structure to the frame, the system is dismantled and selected optimal type mounts.


Conclusion

Repair of blinds is not required if you follow the rules for operating sun protection systems and initially check the quality of the components. Cheap models will not last long, so do not chase false savings.

If a breakdown is identified that cannot be fixed on your own, expert advice will be very helpful, but it is worth considering that repair teams may exaggerate the complexity of the problem. If possible, it is better to initially purchase systems with a guarantee, this will help save money and extend the life of the blinds.

Every blind is made up of a large number parts and it is quite natural that some of them periodically fail. Do not rush to throw away the entire structure, because most often it is enough to replace just one broken part. And for this it is not necessary to turn to specialists. Try to repair vertical blinds with your own hands. All you need is desire, a bit of creative savvy, and minimal experience with basic tools. And you can always buy all the necessary parts in a specialized store.

What parts of vertical blinds break most often

Before proceeding with the study of the repair instructions, let's remember what elements vertical blinds consist of:

  1. Bearing and decorative cornices;
  2. Runners to which slats are attached;
  3. Lamella holders (shoulders) connecting the lamellas with the supporting cornice;
  4. Weights that give weight to the canvases;
  5. A chain connecting the lamellas from below;
  6. Control chain (with its help, the lamellas rotate around the axis);
  7. Cord control (shifts and pushes the slats) with a plastic tensioner;
  8. Lamels.

The most common breakdowns are:

  • breakage of the chain connecting the lamellas from below;
  • breakage of the adjusting cord;
  • breakage of the runners on which the lamellas are held;
  • breakage of the "shoulder";
  • loss of a presentable appearance of one or more lamellas.

None of these breakdowns are critical, and you can fix them yourself. How to repair vertical blinds with fabric slats, we will analyze in stages below.

Connecting chain replacement

The lower chain consists of small plastic balls through which the fishing line is threaded. With careless handling, it breaks quite often, but it will be very difficult to replace it with a new one.

The procedure is as follows:

  1. We purchase a new part in a specialized store, having previously calculated its length. To do this, you need to measure the width of one lamella and multiply it by their total number.
  2. Then, without removing the blinds from the cornice, we remove the damaged chain and insert a new one in its place.

When replacing the connecting chain, the balls are inserted into the grooves on the weighting bars

Replacing the control chain

The structure of the control chain is the same as that of the bottom connecting chain. If you pull sharply on it, sooner or later it will inevitably break. Replacing the control circuit is also not difficult, but one condition must be met: before disassembling the sliders for replacement, they must be set to the open position. Then:

  1. Determine the length of the new chain. It is equal to the length of the lamellas.
  2. We unscrew the side cover on the ledge and take out the plastic gear.
  3. We remove the damaged chain and insert a new one in its place.
  4. We return the gear to its place.
  5. We put the side cover on the cornice and check how each lamella rotates.

In a circle, the control chain is closed with a special plastic lock

Control Cord Replacement

The control cord is, in general, just a rope, on which the movement of the slats along the eaves depends. And like any rope, it is not immune from a rush. But this rarely happens, most often the quality of fixing the control cord worsens and it does not stay in place. To replace and straighten a broken control cord before removing the blinds for repairs, follow these steps:

  1. We measure the cornice of vertical blinds by the width and height of the slats. This data will allow you to calculate the required length of the new cord. The calculation is performed as follows: the width of the cornice is multiplied by 2, the height of the lamellas is multiplied by 1.5, the resulting values ​​are added.
  2. We remove the tensioner from the old rope and fasten it to the new cord.
  3. We pass the ends of the new control cord alternately through the holes in the side cover of the eaves, and then through each slider.
  4. Then we fix the first end in the fixation device, and thread the second end through the roller from the opposite side of the cornice, return it to the fixing device, fix it in the form of a loop and twist it from above with any suitable tool.

The tensioner keeps the control cord in a vertical position.

Slider Replacement

This repair is the hardest. First of all, it is necessary to purchase new runners and the so-called connecting distances that serve to fasten them.

When removing a broken slider, you must be careful, because you will have to disassemble the mechanism and reassemble it in exactly the reverse order.

The procedure is as follows:

  1. We dismantle the control cord (otherwise it will interfere with the workflow).
  2. We unscrew the control mechanism and carefully remove it from the eaves.
  3. Carefully remove all sliders.
  4. We take the broken element, compress the distance from both sides and remove it from the damaged slider.
  5. Paste the distance into the new slider until it clicks.
  6. We pass the control cord through all the runners.
  7. We insert the runners into the eaves, stringing them alternately onto the shaft.
  8. We fasten the control mechanism. It is desirable to do this together: one person holds the cornice, the second one screws the mechanism.
  9. We return the control cord to its place.

This is how the sliders for vertical blinds look like (on the left is the slider with the distance inserted into it)

Shoulder replacement

In the process of replacing the hanger, there should be no problems. This is done quite simply:

  1. Before repairing the shoulder, we purchase a new part corresponding to the width of the lamella.
  2. Carefully remove the broken shoulder from the canvas.
  3. We put the new part in place of the old one.

In the production of blinds, lamella holders are either sewn into the fabric with a fishing line, or simply inserted. To get a broken shoulder in the first case, you will first have to cut the fishing line.


It looks like a lamella holder or "shoulder"

Shortening vertical blinds

In some cases, new blinds have larger size than a window. Therefore, it becomes necessary to shorten them in length and width.

For this we need the following tools:

  • crosshead screwdriver;
  • ruler and tape measure;
  • paint knife;
  • sharp scissors;
  • lighter or matches;
  • iron;
  • pencil.

We shorten the length

Since weights are fixed at the bottom of the slats, it is more convenient to shorten the blinds in length from above. The sequence of actions is as follows:

  1. Before shortening the vertical blinds, remove them from the window along with the cornice and lay them out on the floor. We start work from above from the side with a lifting mechanism.
  2. Carefully pry off the side cover of the eaves with a paint knife, remove it and unscrew the fixing screws.
  3. We remove the runners from the slats of vertical blinds and cornices. You need to work with them carefully, without making excessive efforts. Otherwise, not too durable plastic can be damaged.
  4. We measure the length of the curtains and determine how many centimeters they need to be cut. When assembled on the eaves, no more than 1-2 cm should remain from the lower edge of the blinds to the floor. You should also take into account 2-3 cm for tucking.
  5. We cut all the strips with scissors or a clerical knife to the required length. So that the lamellas do not fray at the cut points, the cut edges must be melted over the fire using matches or a lighter.
  6. We turn the edges of the lamellas. We fix the folds with an iron.
  7. In the center of the folds with a painting knife we ​​make holes for the ears.
  8. We insert strips with ears into the lamellas.
  9. We collect the blinds and fix them above the window.

You need to understand that the above instructions are only suitable for fabric slats. To shorten vertical blinds, the slats of which are made of aluminum, plastic or bamboo, you will have to turn to specialists.

Shortening the Width

In order to reduce the width of the blinds, you will first have to shorten the eaves. To do this, we need a hacksaw for metal. The procedure is as follows:

  1. Remove the side cover of the eaves.
  2. With a hacksaw, saw off the cornice strip to the desired width.
  3. We remove excess slats.
  4. We return the side cover to its place.

Sometimes one or more lamellas lose their presentable appearance: they are torn, covered with spots that cannot be cleaned off, so there is no need to throw away extra lamellas. They will come in handy for you to replace. In addition, if necessary, new slats can be purchased individually from a specialized store or workshop, just like all other parts.

Video: how to shorten the blinds yourself

There are many reasons why blinds fail, but if you follow their operating rules and even when buying, check the quality of the components, repairs will not take a very long time. Of course, it is not necessary to repair them yourself, but keep in mind that some craftsmen exaggerate the complexity of the problem. Therefore, try to make purchases from trusted manufacturers that give a guarantee on all parts and the design as a whole, and repair the blinds with your own hands only when the guaranteed period of their operation has expired.

[Rated: 8 Average rating: 4.4]

Blinds have long been an integral attribute modern home. Everyone chooses according to their taste and in accordance with the requirements of the interior of the room, but perhaps the most common choice is horizontal blinds. They are made from various materials- aluminum, wood, plastic - in various colors and parameters of the slats. They are reliable, functional, give good darkening, they are easy to wash and they do not take up extra space on the windowsill.

However, like any other type of blinds, horizontal ones sometimes need repairs, which you can do yourself with a small set of tools at hand.

Horizontal blinds can last ten years without breakdowns, but this service life is seriously reduced if used improperly.

Design of horizontal blinds

In order for you to better understand the tips for repairing horizontal blinds, you should get to know their device better. This diagram shows the main elements:

The slats of horizontal blinds are mounted on a rotary mechanism and are controlled by adjusting the shaft with a cord and a control knob. The user can rotate the slats to set the ideal position, giving the desired degree of illumination in the room; in addition, with the help of a control cord, the slats linked together are raised and lowered, also contributing to the adjustment of illumination and access to the window.

The lower bar serves as a weight and fastening for the parts of the control mechanism.

The most common causes of broken horizontal blinds

Anything can cause blinds to fail - after all, this mechanism is designed to protect against the sun and prying eyes, and it is fragile enough, which makes it vulnerable to damage. The most common reasons for the breakdown of horizontal blinds are the following factors:

  • Incorrect installation of blinds
  • Too frequent operation
  • Sharp jerks, inaccurate movements when operating the blinds
  • Access for young children and pets to blinds
  • Lamella contamination
  • Independent modernization of the device, which led to the wear of parts


What to do if the blinds are broken?

The first step is to diagnose the breakdown, find out what happened and why the blinds failed.

Then, if necessary, you need to disassemble the structure to the desired state. Attention - when disassembling, fold all parts of the blinds sequentially! This will help to avoid the loss and appearance of "extra" parts after the repair.

A good technique would be to photograph the stages of dismantling the blinds sequentially.


Types of malfunctions of horizontal blinds and their elimination

The canvas of horizontal blinds may stop closing and opening, in addition, it may begin to scroll around its axis. If this happens, then the cause must be sought in the rotary mechanism.

Repair of the rotary mechanism of horizontal blinds

  • Remove the side plugs from the top cornice;
  • Unclench the sides of the eaves;
  • Pull out the pivot shaft using pliers;
  • Insert the new mechanism and assemble the blinds back.

Sometimes it is not the control mechanism that breaks, but the lamellas themselves. In this case, you will have to take the following steps.

Repair of slats of horizontal blinds

  • Squeeze out the plug of the cord from the bottom bar;
  • Cut off the ends of the knot and remove the cord;
  • Remove the broken lamellas and put new ones in their place;
  • Tie the cord into a knot;
  • Insert the plug into the bottom bar.

If the slats are in order, but the problem is a torn ladder, the blinds will also have to be removed, but after that the following sequence is performed.


Repair ladder horizontal blinds

  • Remove the side plugs on the top cornice;
  • Pull the upper end of the ladder out of the support (it is located on the axis of the rotary mechanism);
  • Disconnect the canvas in order to remove the cord;
  • Pull out the ladder;
  • Install the latch on the new ladder;
  • Pass the cord through the holes in the slats;
  • Fix the cord and ladder with the plug in the bottom bar.
When threading the cord into the slats, make sure that the position of the jumper of the ladder alternates - to the left / right of the cord

So, now you are familiar with the main malfunctions and how to fix them, and if necessary, you can independently solve the problem of broken horizontal blinds. If you still have questions that you cannot solve, you can always seek help from specialists who will diagnose the problem and carry out repairs so that your blinds will serve you for many more years.

Recently, blinds have become so firmly established in everyday life that they have become quite a familiar item of window decor. For industrial premises, classrooms and offices - this is the most common solution. But what if the blinds don't open? In this article, we will consider the main causes of such breakdowns and how to eliminate them.

Most often, it is the rotary mechanism that breaks in the design of the blinds. But sometimes the cause of a malfunction can be mechanical damage to the lamellas or web fasteners.

Be sure to follow the rules for operating the blinds and keep children and animals away from the mechanism

If the horizontal blinds do not open

First of all, you should always pay attention to the condition of the canvas itself. This is especially true for plastic blinds, since such thin slats are often deformed and confused, which makes it impossible to lift them. In addition, the thread ladder, on which the plates lie, could fray, which caused a distortion. If all the slats are even and neat, the reason may lie in the lifting mechanism itself.

You need to check the condition of the cord itself (chain), with which the horizontal blinds are raised. If there are no nodes and it was not confused anywhere, then the problem is in the box itself and you should contact the master for repair services. Sometimes it is not profitable to order such works, their cost may turn out to be the same or even higher than the price of new blinds.

Skewed and uneven angle of the slats may indicate a malfunction of the rotary mechanism. If the latches break, the blinds will not hold in the assembled state, and if the canvas is strongly warped in one direction, the position of the slats will need to be adjusted.

If parts of the turning and lifting mechanism can most often be replaced with new ones, then broken or bent lamellas cannot be repaired, such blinds can no longer be restored to their previous good condition without replacing the entire canvas with a new one.
include("include/article_ads_v-interiere.php"); ?>

If the vertical blinds do not open

Vertical blinds break in the same way as horizontal ones, and there are several reasons for this:

  • Deformation or damage to one of the lamellas. In such a situation, it is easier to replace it with a new one, otherwise those standing nearby may get confused;
  • Guide damage. If the guides are bent or severely deformed in one place, the movement of the slats will be difficult or impossible;
  • Broken control cord. Violation of the integrity of the cord, with which the lamellas are controlled, may be in a conspicuous place or inside the cassette. It is important to find the place of the break and repair the cord.

Serious damage to vertical blinds often requires the intervention of a master. It is impossible to sort out the entire cornice on your own or completely disassemble the control and rotation mechanism - this requires professional skills and special knowledge.


What to do when the electric blinds do not open?

If the motorized blinds stop responding to remote control commands remote control or panel keys, they do not open or close, it is worth calling a repairman for such systems. It is impossible to try to repair automatic blinds on your own, since such intervention often leads to even greater damage.

But before calling a specialist, it is important to check the following nuances:

  • Are the batteries in the remote control good?
  • If you have a spare remote, you should try to open the blinds with it.

The reason for the breakdown of automation may be a malfunction of the electric drive or a failure in the communication settings between the remote control and the receiver on the mechanism. Sometimes mechanical or automatic blinds fail due to improper installation of the cornice or canvas. That is why it is better to entrust the installation of the structure to specialists.

In any case, only a professional will be able to diagnose and fix the breakdown quickly and with guaranteed quality. In order for the blinds to last as long as possible, you must strictly follow all the rules and recommendations for use provided by the manufacturer in the documents for the product.