slopes 

Heating boiler Siberian from the manufacturer. Solid propellant heating boilers. How to get to Death Valley

We carry out delivery across Russia and the CIS countries. All goods in the company " New townยป are sold at the price of the manufacturer's factory.

Advantages of boilers Siberia

1. Compactness. The dimensions of the boiler allow you to install it in almost any room.
2. Profitability. The specially designed design of the boiler allows maximum use of thermal energy during fuel combustion.
3. Informative. The temperature of the water in the boiler is shown by a bimetallic thermometer built into the body.
4. Use of the block of heating elements. The ability to connect a block of heating elements with a thermostat allows you to leave the boiler on long time, while it will automatically turn on and maintain a positive temperature in the heating system.
5. Durability. Uninterrupted operation of the boiler is guaranteed for ten years.
6. Manufacturability. Due to the introduction of a water grate, the maximum heat transfer to the carrier was achieved and the rate of heat transfer to the system was increased. Also, the boiler has been modified and has an automatic draft regulator, which allows you to automatically maintain comfortable temperature coolant. This boiler is suitable for closed system heating. It has an additional door in the combustion chamber, which allows to reduce heat loss to a minimum.
7. Presentable appearance. Visually, the boiler looks in the spirit of the times, has a pleasant color scheme and stylish design.
8. Ease of use. The design of this boiler is made with the most convenient arrangement of elements, which significantly improves its ergonomics.

Solid fuel boilers heating allow you to generate heat energy by burning various kinds solid fuel: firewood, coal, pellet, peat. This is heating equipment that has stood the test of time.

Such boilers are easy to operate and reliable. Most of them are independent of power supplies and do not require special permission to install them. They can be used as the only heating device, or as a backup source of thermal energy in conjunction with a diesel heating boiler or an electric boiler.

You can use solid fuel boilers for heating a private house or cottage, including cottages, garages and utility buildings. Their use is especially relevant in areas where it is not possible to connect to the gas supply line or there are power outages.

Solid fuel boilers: main types

Heating solid fuel boilers can vary significantly in terms of operating principles and other parameters. There are the following types of this equipment:

    • allow to receive thermal energy due to combustion of fuel, as a rule, coal or firewood. Heat exchangers of traditional models can be made of steel or cast iron. Cast iron units have a longer service life, while steel units are more resistant to sudden temperature changes.
    • work on wood fuel, which, during combustion, decomposes into gaseous substances and dry residue. These boilers have high efficiency compared to traditional ones.
    • represent the most modern designs which are gaining more and more popularity. They are fuel efficient and do not need to be cleaned more than 2-3 times a month. The design of the boiler ensures that the combustion of the upper fuel layer is limited, which makes it possible to load fuel much less frequently - up to 1 time per day.
    • are attractive to many owners of private houses with the availability of fuel and the possibility of full autonomy. The rather high cost of such units compared to traditional solid fuel boilers pays off due to the high efficiency of the equipment. A significant disadvantage of these boilers is the significant area occupied by them.
    • can significantly reduce the frequency of fuel loading, tk. equipped with a coal bunker and automatic system its supply to the furnace. In addition, coal in such devices is burned under pressure, which makes the process of obtaining thermal energy more productive.

Buy a solid fuel boiler: what to look for

Before you buy a solid fuel boiler for a private house or other premises, you need to analyze the main parameters of its operation and understand how they meet your needs.

    • The power of the boiler is selected based on the parameters of a particular room, in particular its area. An approximate calculation of the required power can be made, focusing on the indicator: 1 kW is required to heat 10 square meters. m of area with a room height of not more than 3 m.
    • The type of fuel the boiler runs on also affects its power and operating time with a single load. As a rule, for each boiler, the manufacturer recommends the use of certain types of fuel, which should be followed for the most effective use equipment.
    • The volume of the loading chamber affects the frequency of fuel loading. The larger it is, the less often this procedure will have to be performed.
    • The design and installation features of the selected model must comply with the parameters of the room in which the boiler is planned to be installed, in particular, its dimensions. In addition, it is necessary to take into account how convenient it will be to open the doors and clean the boiler. Some models are equipped with a mechanical cleaning function.
    • Traction specific. If it is necessary to install the boiler in a room remote from the source of electricity, then it is worth buying a solid fuel boiler operating on natural draft. With available centralized electricity, it is more convenient to use an automatic boiler. Such models are economical and more convenient to use and control, which is carried out using a controller and can even be done remotely.
    • The safety of the boiler is also important, so you should choose a model equipped with an auto-off function.

Solid fuel boilers, the price of which can vary from the most budgetary to the more expensive options, are designed for a long service life, so it is worth choosing a supplier that produces professional installation, setting up the heating unit, as well as ready to carry out its warranty service.

Thanks to the anomalous zone created by the Siberian boilers in Yakutia, a place has appeared that has long been called the Valley of Death. Despite the development of mankind, today, just like before, tourists, researchers and journalists do not back down from the desire to see and unravel this mystical mystery.

Death Valley and its Siberian boilers

According to the main sources, Death Valley is an anomalous zone, which is located in the valley of the Vilyuy River. This mysterious place is located in the Mirny ulus of the republic to the north of the reservoir. The place got its unusual and terrible name due to the deaths that occurred with hunters from these places. This is where the so-called Siberian boilers.

Local residents, reinforcing their own and their stories with real facts, drawings and biography, tell how hunters in this anomalous zone used some huge bronze cauldrons as an overnight stay, after which terrible things happened to them. Upon arrival home, the hunters became very ill and even died. People saw that if you spend the night in a boiler twice, a person dies in the very near future. But why? What provokes the death of a person in this zone? We will try to answer these and many other questions.

History and secrets

For the first time in history, Death Valley was mentioned back in the middle of the 19th century. The explorer and naturalist, and just a grandiose personality, Richard Mack, told the whole world about it. From 1853 to 1855, he conducted many studies here, including in the basins of such rivers as the Chona, Vilyui and Olekma. In addition to studying the relief and water bodies, he also spent a lot of time getting to know the local unusual peoples who inhabit this wild land.

Studying the researcher's notes, it became known that near the Algy Timirbit River, which in translation sounds like a drowned large cauldron, there really is an object that resembles a cauldron in its shape. The item is made entirely of copper. Its exact dimensions are unknown, since most of it is in the ground, but it is known that trees and small shrubs grew in the cauldron itself at that time. From this we can conclude that this boiler is simply huge. After Richard published the book, oh unusual place and the cauldron was recognized by the whole world, but no one dared to equip an entire expedition to such a difficult area for the sake of one metal object in the shape of a cauldron.

It is also proved that in 1971 local ufologists documented the story of a local old-timer - a hunter who talked about the terrible Death Valley. He confirmed the fact that between the two rivers Nurgun and Ataradak there is a huge metal container in which the remains of people in iron clothes lie. But not a single local resident will dare to get closer to the boiler or climb into it.

As a rule, not a single tourist dares to do this, the price for ordinary human curiosity can be too high. And, no matter how hard you try to explain all things scientifically, having traveled around the world, you understand that there are holy places and cursed things that cannot be explained scientifically, and rituals of ancient peoples that break all the laws of physics.

How to get to Death Valley

The river is located 103 km from the city of Mirny. Every day a train passes to Vileyka. You can also get there by train or bus. In the anomalous zone, as a rule, tourists take a navigator with them. But remember that all electronic items fail here from time to time.