Band saw machines for wood 220v. Optimum band saw machines, Germany. Features of band saws for wood

Band saws for wood are the most common type of machine equipment used for wood processing. The main task performed by mechanisms of this type is sawing blanks. large sizes. The presence of equipment provides cutting at different angles, with a maximum depth of up to 400 mm. Due to the design of the units, the power of the electric motor, a high speed of the belt web is ensured. The cutting parameters as a result of the operation of the mechanisms are high-tech and correspond to terms of reference. The use of installations of this type in production in some cases does not require subsequent grinding of parts. Design features allow you to perform technologically complex operations for sawing out curved surfaces.

The quality of the cut is determined by the setting cutting tool, the state of the cutting surface of the tape blade. Unlike metalworking machines, woodworking machines are produced with a vertical frame. Each model is equipped with an electric motor of a certain power. For small machines, it is typical to install motors with a power of up to 1.2 kW. Industrial machines are equipped with powerful motors up to 3.75 kW. The dimensions of the desktop, the presence of additional devices and fixtures determine the technological capabilities of the mechanisms.

Features of band saws for wood

Each unit presented in the catalog differs in the length and width of the cutting tool. On semi-professional units, canvases 3-10 mm wide are installed. Industrial equipment has a massive body, equipped with a saw blade up to 2000 long and 6-15 mm wide. The depth of cut is determined by the amount of clearance between the desktop surface and the frame. Plants are allowed to process wooden parts, the maximum thickness of which does not exceed 8 cm.

The products have an optimal saw movement speed, corresponding to sawing wood of different density without losing the quality of the cut. Models with digital display are equipped with a saw speed controller, which can be set depending on the hardness of the rock.

Units are equipped rotary tables, allowing the installation of workpieces at an angle in the range from 0 to 45 0 . Locking devices are required for all machines. The equipment of the products meets the standards of electrical safety. All installations are covered by warranty service.

German OPTIMUM band saws are reliable and time-tested equipment. For more than 30 years, OPTIMUM has been designing, developing and manufacturing metal cutting equipment. All products of the company are distinguished by quality, accuracy, durability and reasonable price. Design and development is carried out mostly in-house. In addition to its own factories, OPTIMUM cooperates only with manufacturers who are ready to meet the high requirements that the company places on product quality. The extensive knowledge and experience of the company's designers are used for continuous improvement and more effective use supplied equipment. All manufactured OPTIMUM machines are fully tested for performance and compliance with accuracy standards. Regular procedures for incoming inspection of equipment are an integral part of the quality assurance process. By purchasing OPTIMUM band saws, you can be sure that you are buying high-quality and reliable equipment.

How to place an order for German Optimum band saws?

Due to the combination of low prices and high stability of operation, sawmills for wood of the Serra brand (Germany) are widely used in small and medium-sized businesses.

The owners of private companies that are engaged in sawing logs constantly and appreciate its advantages:

1. high yield of products - due to the special modern design band sawmills for wood cutting waste is minimal;
2. the possibility of cutting sawlogs using a manual drive;
3. quick payback and low energy costs during operation, which is especially important for small production shops.

Having bought equipment of suitable power, you can quickly raise your business without significant investments. In addition, customers are attracted by light and quick installation equipment, as well as low-cost maintenance.

What determines the price of wood sawing machines?

The price varies depending on the scale of production. So, inexpensive narrow-band machines equipped with manual drive, are mainly used in small private woodworking shops, as well as in domestic conditions - in the country, farm, suburban area. Wide-belt equipment with a movable saw unit and a hydraulic control unit can be used on an industrial scale.

If you have to choose a band sawmill, pay attention to the high productivity of machines with a vertical saw installation (30 - 85 cubic meters per shift) and the correct cutting geometry of the board. The speed of work is ensured by the rigid installation of the saw unit and, as a rule, mechanized feeding of the log on a conveyor or carriage moving reciprocating.

The principle of operation of the band sawmill

The working part of the sawmill is a metal saw band that moves in a horizontal plane along the sawn log, which is fixedly fixed on the platform. The saw blade is stretched between the driving and driven pulleys, and the tension is chosen so as to create conditions for high-quality cutting of wood during the entire working time.

The operator of the sawmill, using hydraulic adjustment devices or an electronic ruler, sets the dimensions of the lumber to be produced from logs. Then he selects, depending on the type and hardness of the wood, the optimum sawing speed. The functions of the operator include, in addition, laying each log on the platform, fixing it with special clamps and turning it over to make new cuts, as well as removing wood scraps from the platform.