Battery for gsm camera v900 b 1.1. MMS GSM cameras and their purpose. Alarm warning with audible signal

The MMC camera allows you to take pictures of the camera installation site in manual and automatic mode, when you yourself are in another place. It is equipped with a microphone for listening to the installation site, a motion sensor, an infrared sensor and an infrared illumination system for night shooting. With this camera, you can take pictures and send them to any cellular MMS phone that supports MMS. Snapshots can be sent as an MMS message or to a pre-set e-mail address. You can change the settings of the MMS camera by phone using the SMS command set. Using your phone and/or computer, you can study the received image in detail, save and use it in a form convenient for you.

Buying MMC Camera V900 in a specialized Jet-Video Company, you can order fast free delivery of high-quality licensed equipment at affordable prices.

Key Features MMC Camera V900:

• The device uses a SIM card to work. The camera can send an MMS message to any MMS phone that supports MMS reception and MMS reception via e-mail.
• Remote control MMS-camera by SMS from a mobile phone.
• Listen: call the number assigned to the SIM card in the camera to listen to the installation location.
• Detection of moving objects sends an alarm signal at any movement in the area of ​​the camera.
• Infrared illumination: The MMS-camera takes high-quality photos even in complete darkness due to infrared illumination.
• Send MMS to a predefined mobile phone number.
• Send pictures via e-mail: The camera can also send photo messages to a pre-specified e-mail address.
• Sending an alarm message: The camera can simultaneously send an alarm message, including photos, via SMS, MMS, e-mail, and initiate a phone call to your phone.
• Scheduled Camera Operation: The start and end of camera operation can be pre-programmed at preset intervals.
• Easy installation: the camera can be installed in any place convenient for you with an external power connection or powered by a built-in battery.
• Built-in lithium battery ensures uninterrupted operation of the camera in case of power failure.
• Accessories: the package includes two remote control units for arming and disarming, equipped with an alarm button.

13. Getting help and assistance: a guide

"Mobile Camera"- this is a device thanks to which you will always be aware of what is happening in the territory of interest to you. Whether it's an apartment Vacation home or office. Leave your child with a nanny and worry? Now you will always know what is happening in your absence. In addition, the device is so tiny that it will never attract too much attention.

The camera can be configured to send pictures from the place of observation in the form of MMS messages to the set number, also, using a motion sensor that will signal any change in the field of action of the camera, you will receive photos from the place of installation of the camera. In addition, you can receive pictures by SMS request.
The MMC camera has a built-in microphone. If necessary, you can call the camera and listen to the sound.

Controlling the camera is no more difficult than with a regular phone.
A SIM card with a special tariff is attached to the camera.
The equipment is equipped only with MegaFon network settings.

Specifications MMC Camera V900:

Power supply 100-240 V, 50 Hz
Operating temperature from -10 to +45° С
Storage temperature -20 to +60°C
Relative humidity 10-90% non-condensing
Operating frequency range, MHz GSM 900/1800
Data transfer protocol GSM Phase 2/2+, including
data transfer
Operating frequency of the remote control unit 433 MHz or 315 MHz
Effective working distance
remote control unit 10 m
Received Image Format JPEG
Image size, pixels 160×128, QVGA 320×240,
VGA 640×480 dots
Camera resolution 30,000 pixels
Camera viewing angle 60° horizontally and vertically
Night shooting distance up to 6 m
Lithium battery 800 mAh

GSM alarm system based on MMS camera Youthnet V900 TUTA-B20 allows you to capture all events occurring in the area of ​​the built-in motion sensor and has the ability to connect up to 15 external wireless sensors.

An alarm received from GSM alarm sensors is sent to your phone in the form of an alarm SMS message and MMS messages with a series of photographs of the protected object in the camera's visibility zone. It is also possible to receive images by e-mail of the owner.

The owner of the V900 TUTA-B20 GSM alarm system can connect to the system with a simple call and listen to the room using the built-in microphone. The alarm also has a built-in speaker that allows two-way audio exchange with persons in the protected area.

The built-in infrared illumination will make it possible to take photographs of intruders even in complete darkness (see example of a photograph). Also, the owner can himself initiate the receipt of photographs, which makes it possible to once again verify the penetration of the protected object. The presence of photographs of intruders allows, if necessary, to provide irrefutable evidence of their guilt. It is possible to turn off the system status LED, which will make the MMS camera discreet.

Your actions in case of penetration may be different: a false alarm will be processed by you and left unanswered, a confirmed alarm will allow you to take action - report the penetration to the guard, security, or immediately call the police.

It is also possible to create a whole security system based on wireless sensors based on the Youthnet V900 TUTA-B20 GSM alarm system. In total, it is possible to connect up to 15 wireless sensors, such as a smoke sensor, water leakage, gas leakage, glass breaking, door opening, and an additional motion sensor. Non-intrusion sensor triggers (i.e. the reaction of plug-in wireless sensors to smoke, water leakage, temperature increase or power outage) can be handled with the help of neighbors, relatives and friends who are close to the protected object. In fact, the V900 TUTA-B20 GSM alarm system, using external connected sensors, allows you to implement a similar concept of a "smart home". This GSM alarm system is suitable for monitoring an apartment, house, office, warm garage or cottage.

System Capabilities

Taking a series of photos when the built-in motion sensor is triggered

Infrared illumination allows you to take pictures at night

Built-in microphone and speaker allow you to set up two-way audio exchange with the protected premises

Arming and disarming both using a key fob and by command from a phone

Automatic periodic arming and disarming: up to three periods per day with a choice of days of the week

The presence of a built-in battery allows the system to work autonomously up to 35 hours, as well as control the presence or absence of electrical network SMS messages

Integrated module for connecting up to 15 standard wireless sensors

Range of connected sensors

Smoke detector

Motion Sensor

Water leakage sensor

Gas sensor

temperature sensor

Glass break sensor

Door opening sensor

Specifications

300,000 pixel camera sensor (CMOS camera)

Camera visibility 70 degrees

Image size 160 x 128, 320 x 240, 640 x 480 pixels

JPEG image format

Infrared illumination range 6 m

Work with sensors at a frequency of 433 MHz

Transfer images to phone or email

Wireless remote control range up to 20 m

The presence of a built-in battery that allows the system to work autonomously 19-35 hours

Today, even a user without any knowledge is able to get everything he wants. A modern megaphone is simply installed, configured, and controlled by commands over the phone.

Features of video surveillance using Megafon

Today, there are three Megafon cameras on the market with different capabilities. They somewhat change the usual order of organization of video surveillance systems.

A short list of features can be described as follows:

1. the camera, first of all, is designed to work in a 3G network, other data transmission channels are not provided;
2. after installation, the megaphone GSM surveillance camera can be controlled by commands sent to its SIM card number;
3. video storage is available on a memory card or branded Megafon;
4. camera shots are sent when a motion detector is triggered or by direct request, by command to a mobile number.

Another feature that video surveillance through a megaphone offers is direct access to audio broadcasts.

To listen to what is happening in the room, just call the camera number.

As an additional security measure, some device models are equipped with a so-called panic button (including on the remote control).

When pressed, the megaphone of the surveillance camera is able to dial the configured number and organize listening to the controlled area.

One of the models, V900, has a panic button directly on the case, which expands the possibilities of alarming and greatly increases the level of security.

Organization of video surveillance at the operator Megafon

The company declares that Megafon video surveillance via the Internet can be organized not only with the help of special branded cameras.

The device can be a regular IP camera. This greatly expands the options available to users.

To use the video surveillance option from the operator, you need to activate it for the tariff plan used.

You can connect to the megaphone 3G video surveillance system:

• ordinary, freestanding;
• several cameras connected to a single router;
• a camera that provides for work on a 3G network.

Certain models of devices offered on the market provide for the possibility of connecting outdoor unit 3G GSM connection.

In this case, video surveillance via a megaphone modem will offer all the possibilities that are interesting to the user.

The mechanics used by the Internet video surveillance megaphone is quite simple.

The user has several options for data transmission:

1. The camera, upon request, which comes to its SIM card, sends an image via MMS.
2. It is possible to take pictures in a series of up to 8 pictures, according to the configured resolutions and the capabilities of MMS messages.
3. Images are sent via MMS to the owner's configured phone when the event is activated by a motion sensor.
4. Separate, most modern Megafon cameras are capable of shooting streaming video. The archive data is recorded on the memory card installed in the device or Megafon's proprietary cloud service.
5. Access to the video archive or pictures taken by the camera is carried out through the proprietary Megafon service, a regular browser is enough to work.

For the full use of security functions, including an emergency panic button, the user does not have to buy storage services. All you need is a phone and camera settings in the options for the Video Surveillance service from Megafon.

Supported cameras

It is impossible to clearly define the types and formats of cameras that can be connected to the Megafon video surveillance service.

Little is required from the device: to have its own IP for access or to be equipped with a communication unit (external or internal) in which the operator's SIM card is installed. It is these data that you will need to specify when setting up the corresponding services.

Based on the requirements of the operator, it is possible to connect to the system even video recorders that form a single stream from several transmitted by separate cameras. However, you will need to fine-tune the resolution and bitrate for video transmission over 3G channels.

The best results are observed if you connect cameras offered by Megafon to the system.

It immediately takes into account all the features of the transmission channel, as well as the basic setting of capabilities, covering a huge audience of consumers.

Today, the Internet video surveillance megaphone is offered in the form of ready-made sets of cameras of various classes and mobile operator packages.

Specifications and models

Megafon offers several cameras on the market so that the user can choose the optimal combination of features and cost.

Megafon V900

A camera that, along with a limited set of features (no video streaming), offers a panic button.

The device is not positioned by remote commands, it must be carefully installed and the image quality adjusted before use.

Characteristics:

• matrix 0.3 MP;
• IR illumination with a range of up to 6 meters for night shooting;
• image resolution up to 640x480 pixels;
• continuous shooting up to 8 MMS is available;
• audio broadcast channel and panic button for forced call of the owner;
• the ability to send MMS, e-mail messages when the sensor is triggered or by;
• viewing angles of 60 degrees horizontally and vertically;
• operating temperature from -10 to 45 degrees.

The device comes with a remote control with a range of 10 meters, can be powered by 220V, run from a built-in 800 mAh battery, which is enough for 24 hours of autonomy.

Megaphone GC19

A more technological solution, the most common for Megafon video surveillance systems due to the optimal ratio of cost and capabilities.

The main positive feature is customizable secure access and the ability to receive a broadcast on any phone that supports video calls.

The camera allows:

1. configure up to 20 users with different access, authorization by the phone number from which the request for a video call is made, the password to be entered;
2. positioning capability: 4 directions of rotation, simple control of tone commands from the phone keypad or SMS transmission;
3. customizable work schedule;
4. access to the video archive;
5. matrix 0.3 MP;
6. support for memory cards up to 2 GB;
7. 1450 mAh battery (200 hours standby, 4 hours audio data, 3 hours video stream);
8. Can be charged and communicate with PC via USB 2.0 port.

The camera is powered by 220V, the battery allows you to successfully use the device where power failures often occur. There is the possibility of sending MMS or messages to e-mail on alarm or request.

Megaphone MF68

The most progressive camera from a mobile operator. The device works only in the WDCMA network, which somewhat limits its target audience.

Characteristics:

• power supply 220V, built-in battery 1450 mAh;
• matrix 0.3 MP;
• video 176x144, 12.67 frames per second;
• works with memory cards;
• rotation angles during positioning: 40 up and 5 down, 45 in both directions horizontally;
• minimum illumination for color mode 20 lx.

The camera is also positioned using the phone, can broadcast streaming video.

Built-in detectors

Without exception, all cameras from Megafon have built-in hardware motion detectors. The response to triggering is configurable and depends on the capabilities of the device.

Some models provide the ability to set the work schedule and sensor sensitivity.

cloud services

To store the video archive, space is offered on cloud storage servers. To use this feature, you need to activate the corresponding option in personal account.

The tariff for video surveillance of a cloud service megaphone does not depend on the type of camera. Any device can be connected to the storage.

Step-by-step setup of a video surveillance system

In order to set up Megafon video surveillance, you first need to log in or register in your personal account.

After that:

1. find the Video Surveillance service and log in. On the first attempt, you will be prompted to register;
2. add a camera in the corresponding section. In this case, you need to specify the IP address. For devices connected to a computer or through a router, you will need special software that can be downloaded from the operator’s website;
3. after specifying the device parameters, it is included in the video surveillance service.

Having done these actions, you can immediately see the result by going to the sections My cameras, View, Video archive.

To use the last section, you need to activate the cloud storage service. This is done (and paid) for each monitoring point separately.

Service Tariffs

Today, Megafon video surveillance is sold as a comprehensive offer, which includes a surveillance device and a mobile communications package.

It takes into account all the features of using the transmission channel and selects the optimal tariffs for users.

However, video surveillance can be activated for other packages as well. In this case, it is more convenient to find out the prices in your personal account on the official website of the operator.

Conclusion

Although Megafon video surveillance cannot boast of true real-time video, its capabilities will be extremely useful for a huge audience of consumers.

Having bought a complex from a camera and an operator's package, it is easy to set up a system literally in minutes, which will increase the level of security at the monitoring object or solve other tasks facing the user.

Video: Megafon - cloud video surveillance service

1. Power on/off

Power on: Slide the power switch to the up position ("On" position). The indicator will turn solid red for 3-5 seconds, then start flashing slowly. After approximately 35 seconds, the indicator will change to green and flash slowly (disarm mode indication) or stay on in green(indication of the security mode). This indicates that the camera is searching for a network and is ready to go. The camera will beep "Dee...".

For more information about the operating mode of the indicator, please refer to the corresponding section of the manual.

2. Activate the remote camera

Method 1: Activate the remote camera from your mobile phone. The request will be executed after the camera (if connected) determines your mobile number as the owner.

Method 2: Enter and send the following SMS command to the camera: #00#

After activation, the camera will send the following SMS message to your mobile phone: "Hello remote camera user, password is 1234".

3. Remote control activation

When the camera indicator is solid or flashing green, press and hold the "Set" button on the back of the instrument for 2 seconds. The camera LED will flash orange to indicate that the camera is ready for programming. Then press any button on the remote control to send a signal to the camera. As soon as the camera receives a signal from the remote control, the indicator of the device will turn solid green for 2 seconds. Press the "Set" button again to exit the programming state. Otherwise, the camera will exit this state automatically after 15 seconds.

One camera can be programmed and controlled by up to 5 remote control fobs.

4. Arming

To arm the unit, press the "Set defense" button on the remote control. If the command is successful, the device will beep "Di..." and send an SMS message to the owner's mobile phone: "Set defense successfully". The camera indicator will turn solid green.

5. Cancel protection

To cancel protection, press the "Cancel defense" button on the remote control.

If the command is successful, the device will beep "Di..." and send an SMS message to the owner's mobile phone: "Cancel defense successfully". The camera indicator will blink green.

6. Image capture

Capturing one image at a time:

Method 1 The owner or family member calls the number of the remote camera until the connection goes through and a ringing tone is heard. They may receive a notification message "Image capturing request received, the camera is busy sending MMS images", in which case they will receive the image later.

Method 2

Owner and family member: #03#

Guest: #03#password#

Capturing Multiple Images Simultaneously:

If the user needs multiple images, send the following SMS command to the camera:

Owner and family member: #03#number of images#

Guest: #03#password#number of images#

The number of images must be set between 1 and 8. If the image size is 160x128 or 320x240, the maximum number of images that can be requested at a time is 8. If the image size is 640x480, the number of images can be 1 or 2.

You may receive a notification message "Image capturing request received, the camera is busy sending MMS images", in which case you will receive images later.

7. Phone tapping

Proactive listening:

The owner or family member calls the camera. She answers the request automatically. Once connected, you can listen to the sounds in the control area.

Listening in emergency situations:

During normal operation of the camera, it is necessary to press the button on the remote control "emergency alarm". The camera will automatically dial the owner's number and he will be able to listen to the sounds in the controlled area. If the owner's phone does not respond, the camera will call other emergency phones in sequence. If the camera dials the owner's numbers and other emergency numbers three times in a circle and none of them answer, the camera will automatically exit the alarm mode.

8. Checking the operating mode

At any time, send the following SMS command to the camera:

For owner and family member: #07#

For guest: #07#password#

The camera will reply with an MMS existing installations camera and its mode of operation (not including the password).

9. Getting help

To get the list of SMS commands and the user manual to your cell phone, you must send an SMS command to the camera.

Getting a list of standard commands:

Send the following SMS command to the camera:

For owner and family member: #09#

For guest: #09#password#

Obtaining the user manual:

If you want to get instruction details, send the following SMS command to the camera:

For owner and family member: #09#1#

For guest: #09#password#1#

This function allows you to reset all parameters and return the settings to their default values. This will remove all custom settings. The owner's phone number setting data, remote control fobs and wireless sensors will be erased. You must use this feature carefully.

Method 1: Turn off the camera (slide the switch up) for more than 20 seconds. Press and hold the "set" button on the back of the camera, then turn on the camera again. The indicator will glow green for 2-4 seconds, then return to a slow flashing red. The camera will beep "DI…" to indicate the end of a successful reset operation.

Method 2: The owner sends the following SMS command to the camera: #08#password#

The camera will reply "The GSM camera have successfully reset to its default settings".

Attention:

1. The password must be sent with the SMS command, otherwise the SMS message will come: "You forgot including 4 digit password to reset camera" and the operation will be rejected.

(Authority: Owner, family)

If the user wants to send an image to his E-mail by e-mail, send the following SMS command to the camera:

For owner and family member: #03# number of shots#1#

When the image size is set to 160x128 or 320x240, the camera can send a maximum of 8 images at a time, so the number of shots must be set between When the image size is set to 640x480, the remote camera can send a maximum of 2 images, so the number of shots must be set to 1 or 2.

After an SMS command is received, the camera will reply "Image capturing request received. The camera is busy sending the MMS image." ("Image capture request received. Camera activated - sending MMS image") and starts sending MMS image to email address.

Attention: The number of shots cannot be ignored. Read Chapter 5. Section 14. Email for more information on setting up email.

14. Email

(Authority: Owner, family)

Note: This feature must be supported by your local mobile provider. Contact your local carrier for details. To add, change or delete their email address, the owner or family member sends an SMS command from their phone. The owner and family member can each set their own email, but no more than one email address. Add/Change Email:#108#EMAIL# After receiving the message successfully, the camera will reply “Email address, has been changed successfully.” The email address must be accurate. Owner and family member can only set one email address from one phone number. If more than one e-mail address is typed from one mobile phone, only the last address will be recognized. If the SMS command to add or change email does not include email parameters, the camera will reply "Invalid format".

Delete email:#109#

After receiving the message successfully, the camera will reply "Delete email successfully". Only the owner can implement this feature. After receiving this SMS command, all email addresses will be deleted.

Note: If this SMS command contains email parameters, the camera will reply "No need e-mail parameter".

When the owner or family member requests images to an email address, the camera will send those images to the specified email address.

If "Send MMS images to email when alarm" is set (Refer to Chapter 5. Section 15: Automatic alarm), the camera will send MMS images to email when alarm occurs.

15. Automatic alarm

The remote camera can trigger an alarm when motion is detected by the wireless sensor or when the emergency button on the remote control is pressed. When an alarm occurs, SMS and MMS messages are sent by default.

There are two ways to activate the automatic alarm.

The owner or family member send the following SMS command to set the automatic alarm mode:

(Authority: Owner, family)

Audible Alarm Warning:

For owner and family: #130#1#

For guest: #130#password#1#

After successfully receiving the message, the camera will sound "Di..." when alarmed.

No sound on alarm:

Owner and family members send SMS command: #130#0#

Not sending SMS message in case of alarm: #11#0#

USER MANUALGSMCAMERAS

SeriesV900

Csafety tips

	This device belongs to the wireless signal transmission devices. Keep it away from electronic equipment that can interfere with the propagation of radio signals and interrupt them.
	Turn off your device in any place where there is an announcement "Explosive" ("Explosive)", "might explode" ("possibility of explosion"), "closed wireless transceiver devices" ("switch off wireless devices transceiver"), etc.
	Do not place the device near a fire, as this may cause the battery to explode.
	Use only the mains supply approved by the appliance manufacturer. Using any other types of networks may damage the product.
	Keep the appliance and accessories out of the reach of children.

Chapter 1 Product Features

Product Features

This device uses a SIM card. It can send MMS images to a specified mobile phone with a color display or to an e - mail address . Remote control: the camera is controlled and activated by SMS command from a mobile phone. Listen: call the camera phone number (SIM card) to listen to the room. Motion Detection: The device detects and alarms any movement within the monitored area. Control Sensors: The device allows you to connect up to 15 sensors, such as magnetic door sensor, infrared body sensor, smoke sensor, gas sensor, etc. Any sensor triggered will cause the camera to send an SMS message. Infrared Illumination: Even in the dark, the camera allows you to get a clear image due to the built-in infrared illumination (LEDs). Special Camera: CMOS pixel camera, can capture clear MMS image. Send image to mobile phone: The camera will send MMS images to your mobile phone and you can view them. Sending images via e-mail: The camera can send MMS images to an e-mail address. You can view them at any time. Multi-mode alarm: the camera can simultaneously send alarm messages as SMS message, MMS message or standard email. Programmable camera turn-on time: the device can be programmed to turn on multiple times at predetermined time intervals. Easy installation: The device uses wireless communication, which allows you to install the camera and wireless sensors anywhere you want. Accessories: the scope of delivery includes 2 remote control fobs. Built-in Lithium Battery: A rechargeable battery keeps the camera running in the event of an external power failure. User manual: can be downloaded at any time to the user's mobile phone by SMS command sent to the camera.

Chapter 2. Explanation of terms

2. Camera arming/Auto alarm

3. Cancel security mode

4. Emergency phone

5. Image capture

6. Audition

Owner: The mobile phone number of the owner (his/her) must be assigned to the camera (see Chapter 4. Section 2. Remote Camera Start). Otherwise, all functions of the remote camera will be disabled. Only one mobile phone number of the owner can be set in the camera. The camera sends messages to the owner's and his/her family's mobile phone numbers or owner-set emergency numbers. The owner must firmly remember the SIM card number and password. Only the owner has the authority to change the camera's password, family members' phone numbers, and emergency numbers

Differences in the powers of the owner, family members and guest:

Functions	Owner	Family	Guest
Changing permissions, setting a password
Automatic alarm
Alarm reception
Receiving pictures by e-mail
alarm
Receiving alarm calls		YES (Alarm numbers only)
Detection, single picture requirement
Get product status, images, help and instructions, send SMS commands
Receiving images by e-mail
Sending SMS commands to a remote camera
Adding, changing or deleting sensors
Switching between Spanish and English versions

2. Camera arming/Auto alarm

The arming command puts the camera into guard mode. In this mode, all wireless sensors connected to the camera and the motion sensor are operational.

In armed mode, if any wireless sensor or motion sensor is triggered, the camera will immediately report an alarm by sending an SMS message and MMS images to the owner's mobile phone and the number set by the owner. If the owner number does not answer the request, the camera will dial other preset numbers until it receives a response. This process is repeated three times, after which automatic dialing stops if none of the preset numbers is answered.

3. Cancel security mode

The disarm command disables the camera's alarm function. All connected wireless and motion sensors do not work unless an emergency code is entered.

4. Emergency phone

Emergency numbers in this document refer to the phone numbers (not including the owner number) that the camera will dial when an emergency remote control code is entered. Emergency numbers can be security phone numbers, family numbers, and first aid organizations. When an emergency code is entered, the camera will firstly dial the owner's number, then dial other emergency phones (the camera's default mode is phone dialing). Only the owner has the authority to install emergency telephones. The maximum number of emergency telephones (including the number of the owner

5. Image capture

The owner/family member/guest sends an SMS command to the camera to receive an MMS image.

The owner/family member calls the camera to get an image.

The owner/family member sends an SMS command to the camera to send the MMS image to an email address (an email address must be set).

6. Audition

The owner or family members can listen online to the room where the camera is installed by calling it. Only one telephone line can be connected to the camera at a time.

7. Settings

All camera settings can be sent and activated by SMS command.

Chapter 3. General Information

1. general description V900-A series cameras

2. Description of the remote control

3. Information about the indicator readings

4. Preparing the camera for work

1. General Description of V900-A Series Camera

Importantcomment: To receive best quality images, remove the protective film from the camera lens and keep the camera lens clean at all times.

	Lens infrared illumination Microphone Indicator	SIM card slot Base
	Fastening retainer Mounting holes Set Button Base	Power button Power connector (mini USB) Holders

2. Description of the remote control

3. Information about the indicator readings

Colour	Action	Status
	slow flash	Network search.	Network search
fast flash	Sensor detected unauthorized movement
Constant glow	The SIM card is not installed or the remote camera is damaged.
	Constant glow	Security mode - the auto signal function is activated.
slow flash	Guard mode cancelled. The car alarm function has been cancelled.
fast flash	Data processing.
Glow for two seconds	Factory reset successfully or sensor loaded
Orange		Remote control workload status.
Red &	Alternating glow of two colors	Sensor load

Attention: Slow flash - 1 time per second, fast flash - 2 times per second .

4. Preparing the camera for work

1 InstallationSIM cards

Open the rubber plug on the left side of the camera. Remove the SIM card slot from the slot by pressing the small dot near the slot with the tip of a pencil. Insert the SIM card into the slot and slide it back into the slot into place. Close the rubber plug.

Attention: This camera only supports GSM network. To work on the SIM card, the request and MMS functions must be activated. Contact your SIM card provider for more information about the services provided by this SIM card.

For reference

If you bought a new SIM card for your phone, you must activate it before inserting it into the camera slot. To do this, insert the SIM card into the phone and turn it on. After that, in the settings, cancel the PIN code request when you turn on the phone.

2 Extrude base

3. Connect to power supply

4 Installing the camera

The camera can be hung on the screws vertically on the wall or placed horizontally in a suitable location.

Choice of mounting location: ·For the best image quality, avoid shining bright light directly on the camera lens. We suggest positioning the camera in such a way that the controlled area is less than 30° in the camera's viewing angle. ·To prevent theft, we suggest placing the camera more than 2.2 meters above the ground. The strength of the network signal affects the image quality, listening volume and MMS transmission rate, so the camera should be located in a place where there is a strong network signal ·To check the image quality, after installing the camera, try to take a few pictures and send them to your mobile phone. Move the remote camera and adjust its angle of view to get the best image.

Chapter 4