Installing a lock on an interior door

If the purchased interior door is not equipped with a lock, you should figure out how to install it yourself. This will allow not only to save money, but also to carry out all the work qualitatively. Before starting the installation, you should understand the instructions and the choice of the locking mechanism. It should be borne in mind that the thickness of the timber from which the standard wooden structure is made must be more than 40 mm. To figure out how to embed a lock in an interior door, you should get acquainted with the features of the process.

Castle features

There are several common types of locking mechanisms that can be installed on interior doors. Some of them are equipped with handles, others come separately. Independent locking mechanisms are installed in this way - first the lock is cut in, and after that, handles are mounted on both sides of the web.

Also, instead of a full-fledged lock, you can choose simple handles with small locking devices (latches). They have a simple design, but the work on their installation is a rather complicated process. For installation, you will need special tools.

After acquiring the lock, you can begin to install the structure. It cuts in quite easily. You can do the work yourself. The procedure is not very complicated. Do not rush in the process of doing work.

Usually the handle is located at an equal distance from the floor and the top of the doorway. Therefore, before installation, it is necessary to measure 1 m from the floor and mark up. After that, you need to use a drill. At the end, it is necessary to equip a hole for the lock. The drill must have a diameter that is equal to the thickness of the body of the locking device. The depth is determined by the length of the locking device.

Then, at the end of the door leaf, it is necessary to mark the place for installing the base plate. To do this, the contour of the part is applied to the wooden product. First, you need to make a hole with a drill in the place where the door handle will be equipped. Drilling must be done with great care.

When the drill appears on the other side of the canvas, drilling must be stopped. Then drilling is carried out on the other side. Some craftsmen drill the canvas right through. However, with this technique, the canvas can be easily damaged.

After that, a lock is installed on the product, and the places where the screws are screwed in are also marked. At the marked places, it is necessary to make holes into which the fasteners will be screwed. To understand how to insert a lock into an interior door with your own hands, it is worth learning about the fastening of the handle and the features of working with doors made of different materials.

Handle attachment

To install the handle, it is necessary to first install decorative overlays on each side of the canvas. Once they are fixed, you can place the handles in the prepared holes.

First, the rod is fixed. It will become a connecting element between the door handles. The length of the latter is measured using a ruler.

It is necessary to attach a receiving overlay to the received marks, and then circle it with a pencil. Holes can be drilled along the contour, and with the help of a chisel, bring it to the desired shape. Next, the overlay is mounted.

Important! After installation, you should check how the lock opens and closes. If necessary, you can bend the tongue of the lining.

This algorithm for installing a lock is more suitable for wooden structures. It is easy to embed locking devices into it by selecting any place on the door. If the canvas is made of metal, you will need to perform work according to a special algorithm. Sealing elements should be installed between the frame and the door.

If there is no router, you can get by with standard tools. In the process of such work, a neat hole is made into which the locking mechanism will be placed. In addition to repairing and inserting locks, a complete replacement of the locking mechanism may be necessary. How to disassemble the lock of an interior wooden door? If the door is made of MDF, the process will be quite simple. The main thing is to accurately choose a lock that fits the dimensions of the already created recesses.

As you can see, installing a lock on an interior door is quite simple. To work, you will need to have a milling cutter or a standard set of tools. When installing the lock, special care must be taken. It is necessary to carefully make a recess in the door leaf.

In order for all work to go quickly, you should carefully prepare for installation - collect the necessary tools, select materials. You should also take into account the basic rules when working with wooden structures. For example, you should not drill a hole for handles right through. It is better to perform them on both sides.